From c768e490640dbb928d1c8a5f7b437a334d0cde44 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 13 Apr 2017 04:45:47 -0400 Subject: i40e: factor out queue control from i40e_vsi_control_(tx|rx) A future patch will need to be able to handle controlling queues without waiting until all VSIs are handled. Factor out the direct queue modification so that we can easily re-use this code. The result is also a bit easier to read since we don't embed multiple single-letter loop counters. Change-ID: Id923cbfa43127b1c24d8ed4f809b1012c736d9ac Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 139 ++++++++++++++++++---------- 1 file changed, 89 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 5c2ceb247959..2bf5bb1b4627 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3919,6 +3919,8 @@ static void i40e_netpoll(struct net_device *netdev) } #endif +#define I40E_QTX_ENA_WAIT_COUNT 50 + /** * i40e_pf_txq_wait - Wait for a PF's Tx queue to be enabled or disabled * @pf: the PF being configured @@ -3948,6 +3950,50 @@ static int i40e_pf_txq_wait(struct i40e_pf *pf, int pf_q, bool enable) return 0; } +/** + * i40e_control_tx_q - Start or stop a particular Tx queue + * @pf: the PF structure + * @pf_q: the PF queue to configure + * @enable: start or stop the queue + * + * This function enables or disables a single queue. Note that any delay + * required after the operation is expected to be handled by the caller of + * this function. + **/ +static void i40e_control_tx_q(struct i40e_pf *pf, int pf_q, bool enable) +{ + struct i40e_hw *hw = &pf->hw; + u32 tx_reg; + int i; + + /* warn the TX unit of coming changes */ + i40e_pre_tx_queue_cfg(&pf->hw, pf_q, enable); + if (!enable) + usleep_range(10, 20); + + for (i = 0; i < I40E_QTX_ENA_WAIT_COUNT; i++) { + tx_reg = rd32(hw, I40E_QTX_ENA(pf_q)); + if (((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 1) == + ((tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 1)) + break; + usleep_range(1000, 2000); + } + + /* Skip if the queue is already in the requested state */ + if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK)) + return; + + /* turn on/off the queue */ + if (enable) { + wr32(hw, I40E_QTX_HEAD(pf_q), 0); + tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK; + } else { + tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK; + } + + wr32(hw, I40E_QTX_ENA(pf_q), tx_reg); +} + /** * i40e_vsi_control_tx - Start or stop a VSI's rings * @vsi: the VSI being configured @@ -3956,39 +4002,13 @@ static int i40e_pf_txq_wait(struct i40e_pf *pf, int pf_q, bool enable) static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable) { struct i40e_pf *pf = vsi->back; - struct i40e_hw *hw = &pf->hw; - int i, j, pf_q, ret = 0; - u32 tx_reg; + int i, pf_q, ret = 0; pf_q = vsi->base_queue; for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) { + i40e_control_tx_q(pf, pf_q, enable); - /* warn the TX unit of coming changes */ - i40e_pre_tx_queue_cfg(&pf->hw, pf_q, enable); - if (!enable) - usleep_range(10, 20); - - for (j = 0; j < 50; j++) { - tx_reg = rd32(hw, I40E_QTX_ENA(pf_q)); - if (((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 1) == - ((tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 1)) - break; - usleep_range(1000, 2000); - } - /* Skip if the queue is already in the requested state */ - if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK)) - continue; - - /* turn on/off the queue */ - if (enable) { - wr32(hw, I40E_QTX_HEAD(pf_q), 0); - tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK; - } else { - tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK; - } - - wr32(hw, I40E_QTX_ENA(pf_q), tx_reg); - /* No waiting for the Tx queue to disable */ + /* Don't wait to disable when port Tx is suspended */ if (!enable && test_bit(__I40E_PORT_TX_SUSPENDED, &pf->state)) continue; @@ -4034,6 +4054,43 @@ static int i40e_pf_rxq_wait(struct i40e_pf *pf, int pf_q, bool enable) return 0; } +/** + * i40e_control_rx_q - Start or stop a particular Rx queue + * @pf: the PF structure + * @pf_q: the PF queue to configure + * @enable: start or stop the queue + * + * This function enables or disables a single queue. Note that any delay + * required after the operation is expected to be handled by the caller of + * this function. + **/ +static void i40e_control_rx_q(struct i40e_pf *pf, int pf_q, bool enable) +{ + struct i40e_hw *hw = &pf->hw; + u32 rx_reg; + int i; + + for (i = 0; i < I40E_QTX_ENA_WAIT_COUNT; i++) { + rx_reg = rd32(hw, I40E_QRX_ENA(pf_q)); + if (((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 1) == + ((rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 1)) + break; + usleep_range(1000, 2000); + } + + /* Skip if the queue is already in the requested state */ + if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK)) + return; + + /* turn on/off the queue */ + if (enable) + rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK; + else + rx_reg &= ~I40E_QRX_ENA_QENA_REQ_MASK; + + wr32(hw, I40E_QRX_ENA(pf_q), rx_reg); +} + /** * i40e_vsi_control_rx - Start or stop a VSI's rings * @vsi: the VSI being configured @@ -4042,31 +4099,13 @@ static int i40e_pf_rxq_wait(struct i40e_pf *pf, int pf_q, bool enable) static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable) { struct i40e_pf *pf = vsi->back; - struct i40e_hw *hw = &pf->hw; - int i, j, pf_q, ret = 0; - u32 rx_reg; + int i, pf_q, ret = 0; pf_q = vsi->base_queue; for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) { - for (j = 0; j < 50; j++) { - rx_reg = rd32(hw, I40E_QRX_ENA(pf_q)); - if (((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 1) == - ((rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 1)) - break; - usleep_range(1000, 2000); - } + i40e_control_rx_q(pf, pf_q, enable); - /* Skip if the queue is already in the requested state */ - if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK)) - continue; - - /* turn on/off the queue */ - if (enable) - rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK; - else - rx_reg &= ~I40E_QRX_ENA_QENA_REQ_MASK; - wr32(hw, I40E_QRX_ENA(pf_q), rx_reg); - /* No waiting for the Tx queue to disable */ + /* Don't wait to disable when port Tx is suspended */ if (!enable && test_bit(__I40E_PORT_TX_SUSPENDED, &pf->state)) continue; -- cgit v1.2.3