From 7b358f0652dc09069ee19c4cda52fb20a1fa582a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 23 Oct 2014 14:42:33 +0300 Subject: iwlwifi: mvm: initialize the cur_ucode upon boot mvm->cur_ucode wasn't set before we actually load the firmware. This caused issues when we boot in RFKILL since we get an RFKILL interrupt upon boot even before we load any firmware. This leads to issues since iwl_mvm_set_hw_rfkill_state (the RFKILL interrupts handler in mvm) relies on this variable. Fix this. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/ops.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 48cb25a93591..27fb0a1ef274 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -424,6 +424,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, } mvm->sf_state = SF_UNINIT; mvm->low_latency_agg_frame_limit = 6; + mvm->cur_ucode = IWL_UCODE_INIT; mutex_init(&mvm->mutex); mutex_init(&mvm->d0i3_suspend_mutex); -- cgit v1.2.3 From 31b8b343e019e0a0c57ca9c13520a87f9cab884b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 2 Nov 2014 15:48:09 +0200 Subject: iwlwifi: fix RFkill while calibrating If the RFkill interrupt fires while we calibrate, it would make the firmware fail and the driver wasn't able to recover. Change the flow so that the driver will kill the firmware in that case. Since we have now two flows that are calling trans_stop_device (the RFkill interrupt and the op_mode_mvm_start function) - we need to better sync this. Use the STATUS_DEVICE_ENABLED in the pcie transport in an atomic way to achieve this. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=86231 CC: [3.10+] Reviewed-by: Johannes Berg Reviewed-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw.c | 10 +++++++++- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 1 + drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/iwlwifi/mvm/ops.c | 11 ++++++++++- drivers/net/wireless/iwlwifi/pcie/trans.c | 4 ++-- 5 files changed, 23 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index e0d9f19650b0..eb03943f8463 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -284,7 +284,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) lockdep_assert_held(&mvm->mutex); - if (WARN_ON_ONCE(mvm->init_ucode_complete)) + if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating)) return 0; iwl_init_notification_wait(&mvm->notif_wait, @@ -334,6 +334,8 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) goto out; } + mvm->calibrating = true; + /* Send TX valid antennas before triggering calibrations */ ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant); if (ret) @@ -358,11 +360,17 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) MVM_UCODE_CALIB_TIMEOUT); if (!ret) mvm->init_ucode_complete = true; + + if (ret && iwl_mvm_is_radio_killed(mvm)) { + IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); + ret = 1; + } goto out; error: iwl_remove_notification(&mvm->notif_wait, &calib_wait); out: + mvm->calibrating = false; if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) { /* we want to debug INIT and we have no NVM - fake */ mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) + diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 585fe5b7100f..b62405865b25 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -788,6 +788,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm) mvm->scan_status = IWL_MVM_SCAN_NONE; mvm->ps_disabled = false; + mvm->calibrating = false; /* just in case one was running */ ieee80211_remain_on_channel_expired(mvm->hw); diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index b153ced7015b..845429c88cf4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -548,6 +548,7 @@ struct iwl_mvm { enum iwl_ucode_type cur_ucode; bool ucode_loaded; bool init_ucode_complete; + bool calibrating; u32 error_event_table; u32 log_event_table; u32 umac_error_event_table; diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 27fb0a1ef274..5b719ee8e789 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -753,6 +753,7 @@ void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state) static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) { struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + bool calibrating = ACCESS_ONCE(mvm->calibrating); if (state) set_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status); @@ -761,7 +762,15 @@ static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) wiphy_rfkill_set_hw_state(mvm->hw->wiphy, iwl_mvm_is_radio_killed(mvm)); - return state && mvm->cur_ucode != IWL_UCODE_INIT; + /* iwl_run_init_mvm_ucode is waiting for results, abort it */ + if (calibrating) + iwl_abort_notification_waits(&mvm->notif_wait); + + /* + * Stop the device if we run OPERATIONAL firmware or if we are in the + * middle of the calibrations. + */ + return state && (mvm->cur_ucode != IWL_UCODE_INIT || calibrating); } static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 3781b029e54a..160c3ebc48d0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -915,7 +915,8 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) * restart. So don't process again if the device is * already dead. */ - if (test_bit(STATUS_DEVICE_ENABLED, &trans->status)) { + if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) { + IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n"); iwl_pcie_tx_stop(trans); iwl_pcie_rx_stop(trans); @@ -945,7 +946,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) /* clear all status bits */ clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); clear_bit(STATUS_INT_ENABLED, &trans->status); - clear_bit(STATUS_DEVICE_ENABLED, &trans->status); clear_bit(STATUS_TPOWER_PMI, &trans->status); clear_bit(STATUS_RFKILL, &trans->status); -- cgit v1.2.3