From a1d2dc5b407ae18b59b7a129c93c8eb5ad7b1c80 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 25 Mar 2014 08:54:37 -0700 Subject: NFC: trf7970a: Turn RF on after hardware is configured The NFC digital layer calls the 'switch_rf' hook to turn the RF on before it configures the RF technology and framing. There is potential to confuse a tag doing it this way so don't enable the RF until the RF technology and initial framing have been configured. Signed-off-by: Mark A. Greer Signed-off-by: Samuel Ortiz --- drivers/nfc/trf7970a.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index 203d86fb1d54..0a46348f9af6 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -779,11 +779,6 @@ static int trf7970a_init(struct trf7970a *trf) trf->special_fcn_reg1 = 0; - ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, - trf->chip_status_ctrl | TRF7970A_CHIP_STATUS_RF_ON); - if (ret) - goto err_out; - trf->iso_ctrl = 0xff; return 0; @@ -796,6 +791,10 @@ static void trf7970a_switch_rf_off(struct trf7970a *trf) { dev_dbg(trf->dev, "Switching rf off\n"); + trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON; + + trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, trf->chip_status_ctrl); + gpio_set_value(trf->en_gpio, 0); gpio_set_value(trf->en2_gpio, 0); @@ -948,6 +947,18 @@ static int trf7970a_config_framing(struct trf7970a *trf, int framing) return ret; } + if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) { + ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, + trf->chip_status_ctrl | + TRF7970A_CHIP_STATUS_RF_ON); + if (ret) + return ret; + + trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON; + + usleep_range(5000, 6000); + } + return 0; } -- cgit v1.2.3