From 9c24ef41fe128eb4c36b7786fced39ef5acd10de Mon Sep 17 00:00:00 2001 From: Henry Paulissen Date: Mon, 29 Feb 2016 00:13:26 +0100 Subject: pinctrl: sunxi: Remove non existing irq's While I was testing irq's on the cubietruck I found a couple of not working irq pins. Further diving into the problem it opened up a mess called "manual". This so called manual (A20 user manual v1.3 dated 2014-10-10) says: Pin overview: Page 233: EINT12 is on pin PC19 mux6. Page 236: EINT12 is on pin PH12 mux6. Now, it is a bit strange to have the same IRQ on 2 different pins, but I guess this could still be possible hardware wise. But then: Pin registers: Page 253: EINT12 is *not* on pin PC19. Page 281: EINT12 is on pin PH12. The manual is so contradicting that further tests had to be made to see which of the 2 statements where correct. This patch is based on actual outcome of these tests and not what the manual says. Test procedure used: Connect a 1 pulse per second (GPS) line to the pin. echo pin### > /sys/class/gpio/export echo in > /sys/class/gpio/gpio###/direction echo rising > /sys/class/gpio/gpio###/edge Check /proc/interrupts if a irq was attached and if irq's where received. Signed-off-by: Henry Paulissen Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c index cf1ce0c02600..25748b410f28 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c @@ -343,26 +343,22 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = { SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "nand0"), /* NCE4 */ - SUNXI_FUNCTION(0x3, "spi2"), /* CS0 */ - SUNXI_FUNCTION_IRQ(0x6, 12)), /* EINT12 */ + SUNXI_FUNCTION(0x3, "spi2")), /* CS0 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 20), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "nand0"), /* NCE5 */ - SUNXI_FUNCTION(0x3, "spi2"), /* CLK */ - SUNXI_FUNCTION_IRQ(0x6, 13)), /* EINT13 */ + SUNXI_FUNCTION(0x3, "spi2")), /* CLK */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 21), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "nand0"), /* NCE6 */ - SUNXI_FUNCTION(0x3, "spi2"), /* MOSI */ - SUNXI_FUNCTION_IRQ(0x6, 14)), /* EINT14 */ + SUNXI_FUNCTION(0x3, "spi2")), /* MOSI */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 22), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "nand0"), /* NCE7 */ - SUNXI_FUNCTION(0x3, "spi2"), /* MISO */ - SUNXI_FUNCTION_IRQ(0x6, 15)), /* EINT15 */ + SUNXI_FUNCTION(0x3, "spi2")), /* MISO */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 23), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), -- cgit v1.2.3