From 993cc8753453fccfe060a535bbe21fcf1001b626 Mon Sep 17 00:00:00 2001 From: Nagarjuna Kristam Date: Wed, 28 Aug 2019 16:24:57 +0530 Subject: usb: host: xhci-tegra: Set DMA mask correctly The Falcon microcontroller that runs the XUSB firmware and which is responsible for exposing the XHCI interface can address only 40 bits of memory. Typically that's not a problem because Tegra devices don't have enough system memory to exceed those 40 bits. However, if the ARM SMMU is enable on Tegra186 and later, the addresses passed to the XUSB controller can be anywhere in the 48-bit IOV address space of the ARM SMMU. Since the DMA/IOMMU API starts allocating from the top of the IOVA space, the Falcon microcontroller is not able to load the firmware successfully. Fix this by setting the DMA mask to 40 bits, which will force the DMA API to map the buffer for the firmware to an IOVA that is addressable by the Falcon. Signed-off-by: Nagarjuna Kristam Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/1566989697-13049-1-git-send-email-nkristam@nvidia.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index dafc65911fc0..2ff7c911fbd0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1194,6 +1194,16 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra_xusb_config(tegra, regs); + /* + * The XUSB Falcon microcontroller can only address 40 bits, so set + * the DMA mask accordingly. + */ + err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40)); + if (err < 0) { + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); + goto put_rpm; + } + err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); -- cgit v1.2.3