From 8d45e42babb1c7b1a1974cc7c4582efcaba11a35 Mon Sep 17 00:00:00 2001 From: LABBE Corentin Date: Wed, 8 Feb 2017 09:31:08 +0100 Subject: net: stmmac: fix some typos in comments This patch fix some typos in comments. Signed-off-by: Corentin Labbe Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 6 +++--- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 ++++++++-------- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +- 3 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c index a414bde56dd7..3b1570d73880 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c @@ -102,7 +102,7 @@ static void show_tx_process_state(unsigned int status) pr_debug("- TX (Stopped): Reset or Stop command\n"); break; case 1: - pr_debug("- TX (Running):Fetching the Tx desc\n"); + pr_debug("- TX (Running): Fetching the Tx desc\n"); break; case 2: pr_debug("- TX (Running): Waiting for end of tx\n"); @@ -136,7 +136,7 @@ static void show_rx_process_state(unsigned int status) pr_debug("- RX (Running): Fetching the Rx desc\n"); break; case 2: - pr_debug("- RX (Running):Checking for end of pkt\n"); + pr_debug("- RX (Running): Checking for end of pkt\n"); break; case 3: pr_debug("- RX (Running): Waiting for Rx pkt\n"); @@ -246,7 +246,7 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], unsigned long data; data = (addr[5] << 8) | addr[4]; - /* For MAC Addr registers se have to set the Address Enable (AE) + /* For MAC Addr registers we have to set the Address Enable (AE) * bit that has no effect on the High Reg 0 where the bit 31 (MO) * is RO. */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 1ef602820110..0636858cf77a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -216,7 +216,7 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv) /** * stmmac_hw_fix_mac_speed - callback for speed selection * @priv: driver private structure - * Description: on some platforms (e.g. ST), some HW system configuraton + * Description: on some platforms (e.g. ST), some HW system configuration * registers have to be set according to the link speed negotiated. */ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) @@ -416,7 +416,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p, /** * stmmac_hwtstamp_ioctl - control hardware timestamping. * @dev: device pointer. - * @ifr: An IOCTL specefic structure, that can contain a pointer to + * @ifr: An IOCTL specific structure, that can contain a pointer to * a proprietary structure used to pass information to the driver. * Description: * This function configures the MAC to enable/disable both outgoing(TX) @@ -1003,7 +1003,7 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i) * @dev: net device structure * @flags: gfp flag. * Description: this function initializes the DMA RX/TX descriptors - * and allocates the socket buffers. It suppors the chained and ring + * and allocates the socket buffers. It supports the chained and ring * modes. */ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags) @@ -2532,7 +2532,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) if (unlikely(status == discard_frame)) { priv->dev->stats.rx_errors++; if (priv->hwts_rx_en && !priv->extend_desc) { - /* DESC2 & DESC3 will be overwitten by device + /* DESC2 & DESC3 will be overwritten by device * with timestamp value, hence reinitialize * them in stmmac_rx_refill() function so that * device can reuse it. @@ -2555,7 +2555,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) frame_len = priv->hw->desc->get_rx_frame_len(p, coe); - /* If frame length is greather than skb buffer size + /* If frame length is greater than skb buffer size * (preallocated during init) then the packet is * ignored */ @@ -2761,7 +2761,7 @@ static netdev_features_t stmmac_fix_features(struct net_device *dev, /* Some GMAC devices have a bugged Jumbo frame support that * needs to have the Tx COE disabled for oversized frames * (due to limited buffer sizes). In this case we disable - * the TX csum insertionin the TDES and not use SF. + * the TX csum insertion in the TDES and not use SF. */ if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN)) features &= ~NETIF_F_CSUM_MASK; @@ -2988,7 +2988,7 @@ static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v) (priv->dma_cap.hash_filter) ? "Y" : "N"); seq_printf(seq, "\tMultiple MAC address registers: %s\n", (priv->dma_cap.multi_addr) ? "Y" : "N"); - seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n", + seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n", (priv->dma_cap.pcs) ? "Y" : "N"); seq_printf(seq, "\tSMA (MDIO) Interface: %s\n", (priv->dma_cap.sma_mdio) ? "Y" : "N"); @@ -3485,7 +3485,7 @@ int stmmac_resume(struct device *dev) priv->irq_wake = 0; } else { pinctrl_pm_select_default_state(priv->device); - /* enable the clk prevously disabled */ + /* enable the clk previously disabled */ clk_enable(priv->plat->stmmac_clk); clk_enable(priv->plat->pclk); /* reset the phy so that it's ready */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index b0344c213752..a1a469efd54f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -198,7 +198,7 @@ int stmmac_mdio_reset(struct mii_bus *bus) /* This is a workaround for problems with the STE101P PHY. * It doesn't complete its reset until at least one clock cycle - * on MDC, so perform a dummy mdio read. To be upadted for GMAC4 + * on MDC, so perform a dummy mdio read. To be updated for GMAC4 * if needed. */ if (!priv->plat->has_gmac4) -- cgit v1.2.3