From b317828beec632791a440a677de5116ab9bd900a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 11:10:24 -0300 Subject: [media] v4l: vsp1: Fix error return code in vsp1_video_init() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/vsp1/vsp1_video.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index 714c53ef6c11..4b0ac07af662 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -1026,8 +1026,10 @@ int vsp1_video_init(struct vsp1_video *video, struct vsp1_entity *rwpf) /* ... and the buffers queue... */ video->alloc_ctx = vb2_dma_contig_init_ctx(video->vsp1->dev); - if (IS_ERR(video->alloc_ctx)) + if (IS_ERR(video->alloc_ctx)) { + ret = PTR_ERR(video->alloc_ctx); goto error; + } video->queue.type = video->type; video->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; -- cgit v1.2.3 From 4fd1fb7af5c19ccfc1dba66ba7ffaf0fb3be6ee1 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sat, 2 Nov 2013 21:09:07 -0300 Subject: [media] gspca-stk1135: Add delay after configuring clock Add a small delay at the end of configure_clock() to allow sensor to initialize. This is needed by Asus VX2S laptop webcam to detect sensor type properly (the already-supported MT9M112). Signed-off-by: Ondrej Zary Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/stk1135.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/media/usb/gspca/stk1135.c b/drivers/media/usb/gspca/stk1135.c index 1fc80af2a189..48234c9a8b6c 100644 --- a/drivers/media/usb/gspca/stk1135.c +++ b/drivers/media/usb/gspca/stk1135.c @@ -361,6 +361,9 @@ static void stk1135_configure_clock(struct gspca_dev *gspca_dev) /* set serial interface clock divider (30MHz/0x1f*16+2) = 60240 kHz) */ reg_w(gspca_dev, STK1135_REG_SICTL + 2, 0x1f); + + /* wait a while for sensor to catch up */ + udelay(1000); } static void stk1135_camera_disable(struct gspca_dev *gspca_dev) -- cgit v1.2.3 From 858559a29258a30d9f4839286b4aca6ab8c5c8d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Nov 2013 10:03:57 -0300 Subject: [media] gspca_sunplus: Add new usb-id for 06d6:0041 Reported-by: mjs Tested-by: mjs Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/sunplus.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c index a517d185febe..46c9f2229a18 100644 --- a/drivers/media/usb/gspca/sunplus.c +++ b/drivers/media/usb/gspca/sunplus.c @@ -1027,6 +1027,7 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x055f, 0xc650), BS(SPCA533, 0)}, {USB_DEVICE(0x05da, 0x1018), BS(SPCA504B, 0)}, {USB_DEVICE(0x06d6, 0x0031), BS(SPCA533, 0)}, + {USB_DEVICE(0x06d6, 0x0041), BS(SPCA504B, 0)}, {USB_DEVICE(0x0733, 0x1311), BS(SPCA533, 0)}, {USB_DEVICE(0x0733, 0x1314), BS(SPCA533, 0)}, {USB_DEVICE(0x0733, 0x2211), BS(SPCA533, 0)}, -- cgit v1.2.3 From 6633327d59067fe16128d66968cd50a10ca7a09c Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 9 Nov 2013 18:28:43 -0300 Subject: [media] dvb_demux: fix deadlock in dmx_section_feed_release_filter() dmx_section_feed_release_filter() locks dvbdmx->mutex and if the feed is still filtering, it calls feed->stop_filtering(feed). stop_filtering() is implemented by dmx_section_feed_stop_filtering() that first of all try to lock the same mutex: dvbdmx->mutex. That leads to a deadlock. It does not happen often in practice because all callers of release_filter() stop filtering by themselves. So the problem can happen in case of race condition only. The patch releases dvbdmx->mutex before call to feed->stop_filtering(feed) and reacquires the mutex after that. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-core/dvb_demux.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 58de4410c525..25f3c6484610 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -1032,8 +1032,13 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed, return -EINVAL; } - if (feed->is_filtering) + if (feed->is_filtering) { + /* release dvbdmx->mutex as far as + it is acquired by stop_filtering() itself */ + mutex_unlock(&dvbdmx->mutex); feed->stop_filtering(feed); + mutex_lock(&dvbdmx->mutex); + } spin_lock_irq(&dvbdmx->lock); f = dvbdmxfeed->filter; -- cgit v1.2.3 From 340f70e911376c6b87e28e7ba3083e24893cb724 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 9 Nov 2013 18:30:13 -0300 Subject: [media] dvb_demux: clean up whitespace in comments from previous patch (trivial) removes trailing whitespace and rebalance line length in comment block Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-core/dvb_demux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 25f3c6484610..eeb8d7fec924 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -1033,8 +1033,8 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed, } if (feed->is_filtering) { - /* release dvbdmx->mutex as far as - it is acquired by stop_filtering() itself */ + /* release dvbdmx->mutex as far as it is + acquired by stop_filtering() itself */ mutex_unlock(&dvbdmx->mutex); feed->stop_filtering(feed); mutex_lock(&dvbdmx->mutex); -- cgit v1.2.3 From 648ad154646a899c03a137bd281ff182f5df0d40 Mon Sep 17 00:00:00 2001 From: Felipe Pena Date: Sat, 9 Nov 2013 18:36:22 -0300 Subject: [media] technisat-usb2: fix typo in variable name The variable txlen was used instead of rxlen in boundary check. (copy-paste error) Signed-off-by: Felipe Pena Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/technisat-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c index 40832a1aef6c..98d24aefb640 100644 --- a/drivers/media/usb/dvb-usb/technisat-usb2.c +++ b/drivers/media/usb/dvb-usb/technisat-usb2.c @@ -102,7 +102,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, if (rxlen > 62) { err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)", device_addr); - txlen = 62; + rxlen = 62; } b[0] = I2C_SPEED_100KHZ_BIT; -- cgit v1.2.3 From f286c2a4faed168843078d1f6fd112bf37dc4902 Mon Sep 17 00:00:00 2001 From: Evgeny Plehov Date: Sat, 9 Nov 2013 18:45:41 -0300 Subject: [media] cxd2820r_c: fix if_ctl calculation fixes tuning for DVB-C Signed-off-by: Evgeny Plehov Reviewed-by: Antti Palosaari Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/cxd2820r_c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb-frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c index 125a44041011..5c6ab4921bf1 100644 --- a/drivers/media/dvb-frontends/cxd2820r_c.c +++ b/drivers/media/dvb-frontends/cxd2820r_c.c @@ -78,7 +78,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) num = if_freq / 1000; /* Hz => kHz */ num *= 0x4000; - if_ctl = cxd2820r_div_u64_round_closest(num, 41000); + if_ctl = 0x4000 - cxd2820r_div_u64_round_closest(num, 41000); buf[0] = (if_ctl >> 8) & 0x3f; buf[1] = (if_ctl >> 0) & 0xff; -- cgit v1.2.3 From 0c413d10515feae02cee967b31bb8afea8aa0d29 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Thu, 8 Aug 2013 19:41:06 -0300 Subject: [media] af9035: add [0413:6a05] Leadtek WinFast DTV Dongle Dual It is IT9135 dual design. Thanks to Michael Piko for reporting that! Reported-by: Michael Piko Signed-off-by: Antti Palosaari Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index c8fcd78425bd..798565c4bb3e 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -1534,6 +1534,8 @@ static const struct usb_device_id af9035_id_table[] = { /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05, + &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, af9035_id_table); -- cgit v1.2.3 From f8e1b699a5504a2da05834c7cfdddb125a8ce088 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 11 Nov 2013 08:16:03 -0300 Subject: [media] bttv: don't setup the controls if there are no video devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The no_video flag was checked in all other cases except one. Calling v4l2_ctrl_handler_setup() if no_video is 1 will crash. This wasn't noticed before since there are only two card types that set no_video to 1, so this type of hardware is quite rare. Signed-off-by: Hans Verkuil Reported-by: Lorenz Röhrl Tested-by: Lorenz Röhrl Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/bt8xx/bttv-driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c index a3b1ee9c00d7..92a06fd85865 100644 --- a/drivers/media/pci/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -4182,7 +4182,8 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) } btv->std = V4L2_STD_PAL; init_irqreg(btv); - v4l2_ctrl_handler_setup(hdl); + if (!bttv_tvcards[btv->c.type].no_video) + v4l2_ctrl_handler_setup(hdl); if (hdl->error) { result = hdl->error; goto fail2; -- cgit v1.2.3 From 89f4d45b2752df5d222b5f63919ce59e2d8afaf4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 25 Oct 2013 06:34:03 -0300 Subject: [media] saa7164: fix return value check in saa7164_initdev() In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/saa7164/saa7164-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index 57ef5456f1e8..1bf06970ca3e 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -1354,9 +1354,11 @@ static int saa7164_initdev(struct pci_dev *pci_dev, if (fw_debug) { dev->kthread = kthread_run(saa7164_thread_function, dev, "saa7164 debug"); - if (!dev->kthread) + if (IS_ERR(dev->kthread)) { + dev->kthread = NULL; printk(KERN_ERR "%s() Failed to create " "debug kernel thread\n", __func__); + } } } /* != BOARD_UNKNOWN */ -- cgit v1.2.3 From 7e4b918750b494b68e24222dea5f7d85e90db022 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Nov 2013 07:34:40 -0300 Subject: [media] cx231xx: use after free on error path in probe We dereference "dev" after it has already been freed. Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/cx231xx/cx231xx-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index e9d017bea377..528cce958a82 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1412,8 +1412,8 @@ err_v4l2: usb_set_intfdata(interface, NULL); err_if: usb_put_dev(udev); - kfree(dev); clear_bit(dev->devno, &cx231xx_devused); + kfree(dev); return retval; } -- cgit v1.2.3 From 9ba6a91f19b8c118d11c549495fa4f7a20505d80 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 4 Nov 2013 06:28:57 -0300 Subject: [media] tef6862/radio-tea5764: actually assign clamp result When adding frequency clamping to the tef6862 and radio-tea5764 drivers I forgot to actually *assign* the clamp result to the frequency. Signed-off-by: Hans Verkuil Reported-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org # for 3.11 and up --- drivers/media/radio/radio-tea5764.c | 2 +- drivers/media/radio/tef6862.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index 036e2f54f4db..3ed1f5669f79 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -356,7 +356,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, So we keep it as-is. */ return -EINVAL; } - clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); + freq = clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); tea5764_power_up(radio); tea5764_tune(radio, (freq * 125) / 2); return 0; diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c index 69e3245a58a0..a9319a24c7ef 100644 --- a/drivers/media/radio/tef6862.c +++ b/drivers/media/radio/tef6862.c @@ -112,7 +112,7 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen if (f->tuner != 0) return -EINVAL; - clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ); + freq = clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ); pll = 1964 + ((freq - TEF6862_LO_FREQ) * 20) / FREQ_MUL; i2cmsg[0] = (MSA_MODE_PRESET << MSA_MODE_SHIFT) | WM_SUB_PLLM; i2cmsg[1] = (pll >> 8) & 0xff; -- cgit v1.2.3 From dff04d34b1171bc33e30ef391c2d2ce7be2beb98 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Mon, 4 Nov 2013 23:18:15 -0300 Subject: [media] marvell-ccic: drop resource free in driver remove The mmp-driver is using devm_* to allocate the resource. The old resource release methods are not appropriate here. Signed-off-by: Libin Yang Acked-by: Jonathan Corbet Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org # for v3.12 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/marvell-ccic/mmp-driver.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index 3458fa0e2fd5..70cb57f3adc2 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -478,18 +478,11 @@ out_deinit_clk: static int mmpcam_remove(struct mmp_camera *cam) { struct mcam_camera *mcam = &cam->mcam; - struct mmp_camera_platform_data *pdata; mmpcam_remove_device(cam); mccic_shutdown(mcam); mmpcam_power_down(mcam); - pdata = cam->pdev->dev.platform_data; - gpio_free(pdata->sensor_reset_gpio); - gpio_free(pdata->sensor_power_gpio); mcam_deinit_clk(mcam); - iounmap(cam->power_regs); - iounmap(mcam->regs); - kfree(cam); return 0; } -- cgit v1.2.3 From 3af41a337a5b270de3e65466a07f106ad97ad0c6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 11 Nov 2013 11:02:52 -0300 Subject: [media] wm8775: fix broken audio routing Commit 5aa9ae5ed5d449a85fbf7aac3d1fdc241c542a79 inverted the mute control state test in s_routing which caused the audio routing to fail. This broke ivtv support for the Hauppauge video/audio input bracket (which adds additional video and audio inputs) all the way back in kernel 2.6.36. This fix fixes the condition and it also removes a nonsense check on the balance control. Bisected-by: Rajil Saraswat Signed-off-by: Andy Walls Reported-by: Rajil Saraswat Tested-by: Hans Verkuil Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org # for v3.10 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/wm8775.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/wm8775.c b/drivers/media/i2c/wm8775.c index 3f584a7d0781..bee7946faa7c 100644 --- a/drivers/media/i2c/wm8775.c +++ b/drivers/media/i2c/wm8775.c @@ -130,12 +130,10 @@ static int wm8775_s_routing(struct v4l2_subdev *sd, return -EINVAL; } state->input = input; - if (!v4l2_ctrl_g_ctrl(state->mute)) + if (v4l2_ctrl_g_ctrl(state->mute)) return 0; if (!v4l2_ctrl_g_ctrl(state->vol)) return 0; - if (!v4l2_ctrl_g_ctrl(state->bal)) - return 0; wm8775_set_audio(sd, 1); return 0; } -- cgit v1.2.3 From 9323297dc0ea9141f8099e474657391bb3ad98f8 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 27 Nov 2013 17:23:00 -0300 Subject: [media] af9035: fix broken I2C and USB I/O There was three small buffer len calculation bugs which caused driver non-working. These are coming from recent commit: commit 7760e148350bf6df95662bc0db3734e9d991cb03 [media] af9035: Don't use dynamic static allocation Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org --- drivers/media/usb/dvb-usb-v2/af9035.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 798565c4bb3e..4453b0b3143a 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -131,7 +131,7 @@ static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) { u8 wbuf[MAX_XFER_SIZE]; u8 mbox = (reg >> 16) & 0xff; - struct usb_req req = { CMD_MEM_WR, mbox, sizeof(wbuf), wbuf, 0, NULL }; + struct usb_req req = { CMD_MEM_WR, mbox, 6 + len, wbuf, 0, NULL }; if (6 + len > sizeof(wbuf)) { dev_warn(&d->udev->dev, "%s: i2c wr: len=%d is too big!\n", @@ -238,7 +238,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, } else { /* I2C */ u8 buf[MAX_XFER_SIZE]; - struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), + struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len, buf, msg[1].len, msg[1].buf }; if (5 + msg[0].len > sizeof(buf)) { @@ -274,8 +274,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, } else { /* I2C */ u8 buf[MAX_XFER_SIZE]; - struct usb_req req = { CMD_I2C_WR, 0, sizeof(buf), buf, - 0, NULL }; + struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len, + buf, 0, NULL }; if (5 + msg[0].len > sizeof(buf)) { dev_warn(&d->udev->dev, -- cgit v1.2.3 From 5264682a3cd197b79995573449249573adb8267c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 4 Nov 2013 06:52:10 -0300 Subject: [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev The remote subdev of any video node in the OMAP3 ISP is an internal subdev that is guaranteed to implement get_fmt. Don't check the return value for -ENOIOCTLCMD, as this can't happen. While at it, move non-critical code out of the mutex-protected section. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/ispvideo.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index a908d006f527..f6304bb074f5 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -339,14 +339,11 @@ __isp_video_get_format(struct isp_video *video, struct v4l2_format *format) if (subdev == NULL) return -EINVAL; - mutex_lock(&video->mutex); - fmt.pad = pad; fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; - ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); - if (ret == -ENOIOCTLCMD) - ret = -EINVAL; + mutex_lock(&video->mutex); + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); mutex_unlock(&video->mutex); if (ret) -- cgit v1.2.3 From d18a88b1f535d627412b2a265d71b2f7d464860e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 27 Nov 2013 17:17:43 -0300 Subject: [media] af9033: fix broken I2C Driver did not work anymore since I2C has gone broken due to recent commit: commit 37ebaf6891ee81687bb558e8375c0712d8264ed8 [media] dvb-frontends: Don't use dynamic static allocation Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org --- drivers/media/dvb-frontends/af9033.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c index 30ee59052157..65728c25ea05 100644 --- a/drivers/media/dvb-frontends/af9033.c +++ b/drivers/media/dvb-frontends/af9033.c @@ -170,18 +170,18 @@ static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val, static int af9033_wr_reg_val_tab(struct af9033_state *state, const struct reg_val *tab, int tab_len) { +#define MAX_TAB_LEN 212 int ret, i, j; - u8 buf[MAX_XFER_SIZE]; + u8 buf[1 + MAX_TAB_LEN]; + + dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len); if (tab_len > sizeof(buf)) { - dev_warn(&state->i2c->dev, - "%s: i2c wr len=%d is too big!\n", - KBUILD_MODNAME, tab_len); + dev_warn(&state->i2c->dev, "%s: tab len %d is too big\n", + KBUILD_MODNAME, tab_len); return -EINVAL; } - dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len); - for (i = 0, j = 0; i < tab_len; i++) { buf[j] = tab[i].val; -- cgit v1.2.3 From 3189ef0290dcc9f44782672fade35847cb30da00 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 22 Nov 2013 04:50:46 -0300 Subject: [media] af9035: unlock on error in af9035_i2c_master_xfer() We introduced a couple new error paths which are missing unlocks. Fixes: 7760e148350b ('[media] af9035: Don't use dynamic static allocation') Signed-off-by: Dan Carpenter Acked-by: Antti Palosaari Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org --- drivers/media/usb/dvb-usb-v2/af9035.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 4453b0b3143a..8f9b2cea88f0 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -245,7 +245,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, dev_warn(&d->udev->dev, "%s: i2c xfer: len=%d is too big!\n", KBUILD_MODNAME, msg[0].len); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto unlock; } req.mbox |= ((msg[0].addr & 0x80) >> 3); buf[0] = msg[1].len; @@ -281,7 +282,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, dev_warn(&d->udev->dev, "%s: i2c xfer: len=%d is too big!\n", KBUILD_MODNAME, msg[0].len); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto unlock; } req.mbox |= ((msg[0].addr & 0x80) >> 3); buf[0] = msg[0].len; @@ -319,6 +321,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, ret = -EOPNOTSUPP; } +unlock: mutex_unlock(&d->i2c_mutex); if (ret < 0) -- cgit v1.2.3 From 812c083ec4ae5182ab034c0ec55dbd5bb937c6f7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 28 Oct 2013 09:16:05 -0300 Subject: [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If SHARK_USE_LEDS=1, but CONFIG_PM=n: drivers/media/radio/radio-shark.c:275: warning: ‘shark_resume_leds’ defined but not used Instead of making the #ifdef logic even more complicated (there are already two definitions of shark_resume_leds()), mark shark_resume_leds() inline to kill the compiler warning. shark_resume_leds() is small and it has only one caller. Signed-off-by: Geert Uytterhoeven Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index 3db8a8cfe1a8..050b3bb96fec 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -271,8 +271,7 @@ static void shark_unregister_leds(struct shark_device *shark) cancel_work_sync(&shark->led_work); } -#ifdef CONFIG_PM -static void shark_resume_leds(struct shark_device *shark) +static inline void shark_resume_leds(struct shark_device *shark) { if (test_bit(BLUE_IS_PULSE, &shark->brightness_new)) set_bit(BLUE_PULSE_LED, &shark->brightness_new); @@ -281,7 +280,6 @@ static void shark_resume_leds(struct shark_device *shark) set_bit(RED_LED, &shark->brightness_new); schedule_work(&shark->led_work); } -#endif #else static int shark_register_leds(struct shark_device *shark, struct device *dev) { -- cgit v1.2.3 From c7223f8f66b685f325879a88a6c955ebf46a8a36 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 10:48:29 -0300 Subject: [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This mirrors the patch to the radio-shark driver by Geert Uytterhoeven. If SHARK_USE_LEDS=1, but CONFIG_PM=n: drivers/media/radio/radio-shark2.c:240: warning: ‘shark_resume_leds’ defined but not used Instead of making the #ifdef logic even more complicated (there are already two definitions of shark_resume_leds()), mark shark_resume_leds() inline to kill the compiler warning. shark_resume_leds() is small and it has only one caller. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark2.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index d86d90dab8bf..8654e0dc5c95 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -237,8 +237,7 @@ static void shark_unregister_leds(struct shark_device *shark) cancel_work_sync(&shark->led_work); } -#ifdef CONFIG_PM -static void shark_resume_leds(struct shark_device *shark) +static inline void shark_resume_leds(struct shark_device *shark) { int i; @@ -247,7 +246,6 @@ static void shark_resume_leds(struct shark_device *shark) schedule_work(&shark->led_work); } -#endif #else static int shark_register_leds(struct shark_device *shark, struct device *dev) { -- cgit v1.2.3 From c1b96a236e94d49d9396d0bbceb5524519c5c66e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 05:11:35 -0300 Subject: [media] videobuf2: Add support for file access mode flags for DMABUF exporting Currently it is not possible for userspace to map a DMABUF exported buffer with write permissions. This patch allows to also pass O_RDONLY/O_RDWR when exporting the buffer, so that userspace may map it with write permissions. Signed-off-by: Philipp Zabel Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/videobuf2-core.c | 8 ++++---- drivers/media/v4l2-core/videobuf2-dma-contig.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index b19b306c8f7f..57ba131f08ad 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1824,8 +1824,8 @@ int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb) return -EINVAL; } - if (eb->flags & ~O_CLOEXEC) { - dprintk(1, "Queue does support only O_CLOEXEC flag\n"); + if (eb->flags & ~(O_CLOEXEC | O_ACCMODE)) { + dprintk(1, "Queue does support only O_CLOEXEC and access mode flags\n"); return -EINVAL; } @@ -1848,14 +1848,14 @@ int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb) vb_plane = &vb->planes[eb->plane]; - dbuf = call_memop(q, get_dmabuf, vb_plane->mem_priv); + dbuf = call_memop(q, get_dmabuf, vb_plane->mem_priv, eb->flags & O_ACCMODE); if (IS_ERR_OR_NULL(dbuf)) { dprintk(1, "Failed to export buffer %d, plane %d\n", eb->index, eb->plane); return -EINVAL; } - ret = dma_buf_fd(dbuf, eb->flags); + ret = dma_buf_fd(dbuf, eb->flags & ~O_ACCMODE); if (ret < 0) { dprintk(3, "buffer %d, plane %d failed to export (%d)\n", eb->index, eb->plane, ret); diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c index 646f08f4f504..33d3871d1e13 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c @@ -393,7 +393,7 @@ static struct sg_table *vb2_dc_get_base_sgt(struct vb2_dc_buf *buf) return sgt; } -static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv) +static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv, unsigned long flags) { struct vb2_dc_buf *buf = buf_priv; struct dma_buf *dbuf; @@ -404,7 +404,7 @@ static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv) if (WARN_ON(!buf->sgt_base)) return NULL; - dbuf = dma_buf_export(buf, &vb2_dc_dmabuf_ops, buf->size, 0); + dbuf = dma_buf_export(buf, &vb2_dc_dmabuf_ops, buf->size, flags); if (IS_ERR(dbuf)) return NULL; -- cgit v1.2.3 From f58c91ce82cbb55a48fbc1a0cb7c84c0d0a4e1bd Mon Sep 17 00:00:00 2001 From: Jonathan McCrohan Date: Sun, 20 Oct 2013 21:34:01 -0300 Subject: [media] media_tree: Fix spelling errors Fix various spelling errors in strings and comments throughout the media tree. The majority of these were found using Lucas De Marchi's codespell tool. [m.chehab@samsung.com: discard hunks with conflicts] Signed-off-by: Jonathan McCrohan Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/siano/smscoreapi.h | 4 ++-- drivers/media/common/siano/smsdvb.h | 2 +- drivers/media/dvb-core/dvb_demux.c | 2 +- drivers/media/dvb-frontends/dib8000.c | 4 ++-- drivers/media/dvb-frontends/drxk_hard.c | 18 +++++++++--------- drivers/media/i2c/adv7183_regs.h | 6 +++--- drivers/media/i2c/adv7604.c | 2 +- drivers/media/i2c/adv7842.c | 2 +- drivers/media/i2c/ir-kbd-i2c.c | 2 +- drivers/media/i2c/m5mols/m5mols_controls.c | 2 +- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 2 +- drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +- drivers/media/i2c/saa7115.c | 2 +- drivers/media/i2c/soc_camera/ov5642.c | 2 +- drivers/media/pci/cx18/cx18-driver.h | 2 +- drivers/media/pci/cx23885/cx23885-417.c | 2 +- drivers/media/pci/pluto2/pluto2.c | 2 +- drivers/media/platform/coda.c | 2 +- drivers/media/platform/exynos4-is/fimc-core.c | 2 +- drivers/media/platform/exynos4-is/media-dev.c | 2 +- drivers/media/platform/omap3isp/isp.c | 2 +- drivers/media/platform/s5p-mfc/regs-mfc.h | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc.c | 12 ++++++------ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +- drivers/media/platform/s5p-tv/mixer.h | 2 +- drivers/media/platform/s5p-tv/mixer_video.c | 4 ++-- drivers/media/platform/soc_camera/omap1_camera.c | 2 +- drivers/media/platform/vivi.c | 4 ++-- drivers/media/platform/vsp1/vsp1_drv.c | 2 +- drivers/media/radio/radio-si476x.c | 4 ++-- drivers/media/rc/imon.c | 2 +- drivers/media/rc/redrat3.c | 2 +- drivers/media/tuners/mt2063.c | 4 ++-- drivers/media/tuners/tuner-xc2028-types.h | 2 +- drivers/media/usb/dvb-usb-v2/mxl111sf.c | 4 ++-- drivers/media/usb/gspca/gl860/gl860.c | 2 +- drivers/media/usb/gspca/pac207.c | 2 +- drivers/media/usb/gspca/pac7302.c | 2 +- drivers/media/usb/gspca/stv0680.c | 2 +- drivers/media/usb/gspca/zc3xx.c | 2 +- drivers/media/usb/pwc/pwc-if.c | 2 +- drivers/media/usb/uvc/uvc_video.c | 2 +- drivers/media/v4l2-core/v4l2-ctrls.c | 2 +- 43 files changed, 65 insertions(+), 65 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h index d0799e323364..9c9063cd3208 100644 --- a/drivers/media/common/siano/smscoreapi.h +++ b/drivers/media/common/siano/smscoreapi.h @@ -955,7 +955,7 @@ struct sms_rx_stats { u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ s32 SNR; /* dB */ u32 ber; /* Post Viterbi ber [1E-5] */ - u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_error_count; /* Number of erroneous SYNC bits. */ u32 ber_bit_count; /* Total number of SYNC bits. */ u32 ts_per; /* Transport stream PER, 0xFFFFFFFF indicate N/A */ @@ -981,7 +981,7 @@ struct sms_rx_stats_ex { u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ s32 SNR; /* dB */ u32 ber; /* Post Viterbi ber [1E-5] */ - u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_error_count; /* Number of erroneous SYNC bits. */ u32 ber_bit_count; /* Total number of SYNC bits. */ u32 ts_per; /* Transport stream PER, 0xFFFFFFFF indicate N/A */ diff --git a/drivers/media/common/siano/smsdvb.h b/drivers/media/common/siano/smsdvb.h index 92c413ba0c79..ae36d0ae0fb1 100644 --- a/drivers/media/common/siano/smsdvb.h +++ b/drivers/media/common/siano/smsdvb.h @@ -95,7 +95,7 @@ struct RECEPTION_STATISTICS_PER_SLICES_S { u32 is_demod_locked; /* 0 - not locked, 1 - locked */ u32 ber_bit_count; /* Total number of SYNC bits. */ - u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_error_count; /* Number of erroneous SYNC bits. */ s32 MRC_SNR; /* dB */ s32 mrc_in_band_pwr; /* In band power in dBM */ diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index eeb8d7fec924..6c7ff0cdcd32 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -435,7 +435,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) dprintk_tscheck("TEI detected. " "PID=0x%x data1=0x%x\n", pid, buf[1]); - /* data in this packet cant be trusted - drop it unless + /* data in this packet can't be trusted - drop it unless * module option dvb_demux_feed_err_pkts is set */ if (!dvb_demux_feed_err_pkts) return; diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c index 90536147bf04..6dbbee453ee1 100644 --- a/drivers/media/dvb-frontends/dib8000.c +++ b/drivers/media/dvb-frontends/dib8000.c @@ -3048,7 +3048,7 @@ static int dib8000_tune(struct dvb_frontend *fe) dib8000_set_diversity_in(state->fe[0], state->diversity_onoff); locks = (dib8000_read_word(state, 180) >> 6) & 0x3f; /* P_coff_winlen ? */ - /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this lenght to lock */ + /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this length to lock */ *timeout = dib8000_get_timeout(state, 2 * locks, SYMBOL_DEPENDENT_ON); *tune_state = CT_DEMOD_STEP_5; break; @@ -3115,7 +3115,7 @@ static int dib8000_tune(struct dvb_frontend *fe) case CT_DEMOD_STEP_9: /* 39 */ if ((state->revision == 0x8090) || ((dib8000_read_word(state, 1291) >> 9) & 0x1)) { /* fe capable of deinterleaving : esram */ - /* defines timeout for mpeg lock depending on interleaver lenght of longest layer */ + /* defines timeout for mpeg lock depending on interleaver length of longest layer */ for (i = 0; i < 3; i++) { if (c->layer[i].interleaving >= deeper_interleaver) { dprintk("layer%i: time interleaver = %d ", i, c->layer[i].interleaving); diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c index d416c15691da..bf29a3f0e6f0 100644 --- a/drivers/media/dvb-frontends/drxk_hard.c +++ b/drivers/media/dvb-frontends/drxk_hard.c @@ -1191,7 +1191,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable) goto error; if (state->m_enable_parallel == true) { - /* paralel -> enable MD1 to MD7 */ + /* parallel -> enable MD1 to MD7 */ status = write16(state, SIO_PDR_MD1_CFG__A, sio_pdr_mdx_cfg); if (status < 0) @@ -1428,7 +1428,7 @@ static int mpegts_stop(struct drxk_state *state) dprintk(1, "\n"); - /* Gracefull shutdown (byte boundaries) */ + /* Graceful shutdown (byte boundaries) */ status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode); if (status < 0) goto error; @@ -2021,7 +2021,7 @@ static int mpegts_dto_setup(struct drxk_state *state, fec_oc_dto_burst_len = 204; } - /* Check serial or parrallel output */ + /* Check serial or parallel output */ fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); if (state->m_enable_parallel == false) { /* MPEG data output is serial -> set ipr_mode[0] */ @@ -2908,7 +2908,7 @@ static int adc_synchronization(struct drxk_state *state) goto error; if (count == 1) { - /* Try sampling on a diffrent edge */ + /* Try sampling on a different edge */ u16 clk_neg = 0; status = read16(state, IQM_AF_CLKNEG__A, &clk_neg); @@ -3306,7 +3306,7 @@ static int dvbt_sc_command(struct drxk_state *state, if (status < 0) goto error; - /* Retreive results parameters from SC */ + /* Retrieve results parameters from SC */ switch (cmd) { /* All commands yielding 5 results */ /* All commands yielding 4 results */ @@ -3849,7 +3849,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz, break; } #if 0 - /* No hierachical channels support in BDA */ + /* No hierarchical channels support in BDA */ /* Priority (only for hierarchical channels) */ switch (channel->priority) { case DRX_PRIORITY_LOW: @@ -4081,7 +4081,7 @@ error: /*============================================================================*/ /** -* \brief Retreive lock status . +* \brief Retrieve lock status . * \param demod Pointer to demodulator instance. * \param lockStat Pointer to lock status structure. * \return DRXStatus_t. @@ -6174,7 +6174,7 @@ static int init_drxk(struct drxk_state *state) goto error; /* Stamp driver version number in SCU data RAM in BCD code - Done to enable field application engineers to retreive drxdriver version + Done to enable field application engineers to retrieve drxdriver version via I2C from SCU RAM. Not using SCU command interface for SCU register access since no microcode may be present. @@ -6399,7 +6399,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe) fe->ops.tuner_ops.get_if_frequency(fe, &IF); start(state, 0, IF); - /* After set_frontend, stats aren't avaliable */ + /* After set_frontend, stats aren't available */ p->strength.stat[0].scale = FE_SCALE_RELATIVE; p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; diff --git a/drivers/media/i2c/adv7183_regs.h b/drivers/media/i2c/adv7183_regs.h index 4a5b7d211d2f..b253d400e817 100644 --- a/drivers/media/i2c/adv7183_regs.h +++ b/drivers/media/i2c/adv7183_regs.h @@ -52,9 +52,9 @@ #define ADV7183_VS_FIELD_CTRL_1 0x31 /* Vsync field control 1 */ #define ADV7183_VS_FIELD_CTRL_2 0x32 /* Vsync field control 2 */ #define ADV7183_VS_FIELD_CTRL_3 0x33 /* Vsync field control 3 */ -#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync positon control 1 */ -#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync positon control 2 */ -#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync positon control 3 */ +#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync position control 1 */ +#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync position control 2 */ +#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync position control 3 */ #define ADV7183_POLARITY 0x37 /* Polarity */ #define ADV7183_NTSC_COMB_CTRL 0x38 /* NTSC comb control */ #define ADV7183_PAL_COMB_CTRL 0x39 /* PAL comb control */ diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index fbfdd2fc2a36..a324106b9f11 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -877,7 +877,7 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd, break; case ADV7604_MODE_HDMI: /* set default prim_mode/vid_std for HDMI - accoring to [REF_03, c. 4.2] */ + according to [REF_03, c. 4.2] */ io_write(sd, 0x00, 0x02); /* video std */ io_write(sd, 0x01, 0x06); /* prim mode */ break; diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index 22f729d66a96..b154f36740b4 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -1013,7 +1013,7 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd, break; case ADV7842_MODE_HDMI: /* set default prim_mode/vid_std for HDMI - accoring to [REF_03, c. 4.2] */ + according to [REF_03, c. 4.2] */ io_write(sd, 0x00, 0x02); /* video std */ io_write(sd, 0x01, 0x06); /* prim mode */ break; diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c index 82bf5679da30..99ee456700f4 100644 --- a/drivers/media/i2c/ir-kbd-i2c.c +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -394,7 +394,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) if (!rc) { /* - * If platform_data doesn't specify rc_dev, initilize it + * If platform_data doesn't specify rc_dev, initialize it * internally */ rc = rc_allocate_device(); diff --git a/drivers/media/i2c/m5mols/m5mols_controls.c b/drivers/media/i2c/m5mols/m5mols_controls.c index f34429e452ab..a60931e66312 100644 --- a/drivers/media/i2c/m5mols/m5mols_controls.c +++ b/drivers/media/i2c/m5mols/m5mols_controls.c @@ -544,7 +544,7 @@ int m5mols_init_controls(struct v4l2_subdev *sd) u16 zoom_step; int ret; - /* Determine the firmware dependant control range and step values */ + /* Determine the firmware dependent control range and step values */ ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &exposure_max); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index 6fec9384d86e..e7f555cc827a 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1460,7 +1460,7 @@ static int s5c73m3_oif_registered(struct v4l2_subdev *sd) mutex_unlock(&state->lock); v4l2_dbg(1, s5c73m3_dbg, sd, "%s: Booting %s (%d)\n", - __func__, ret ? "failed" : "succeded", ret); + __func__, ret ? "failed" : "succeeded", ret); return ret; } diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h index 9d2c08652246..9dfa516f6944 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3.h +++ b/drivers/media/i2c/s5c73m3/s5c73m3.h @@ -393,7 +393,7 @@ struct s5c73m3 { /* External master clock frequency */ u32 mclk_frequency; - /* Video bus type - MIPI-CSI2/paralell */ + /* Video bus type - MIPI-CSI2/parallel */ enum v4l2_mbus_type bus_type; const struct s5c73m3_frame_size *sensor_pix_size[2]; diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c index 637d02634527..afdbcb045cee 100644 --- a/drivers/media/i2c/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -1699,7 +1699,7 @@ static void saa711x_write_platform_data(struct saa711x_state *state, * the analog demod. * If the tuner is not found, it returns -ENODEV. * If auto-detection is disabled and the tuner doesn't match what it was - * requred, it returns -EINVAL and fills 'name'. + * required, it returns -EINVAL and fills 'name'. * If the chip is found, it returns the chip ID and fills 'name'. */ static int saa711x_detect_chip(struct i2c_client *client, diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c index 0a5c5d4fedd6..d2daa6a8f272 100644 --- a/drivers/media/i2c/soc_camera/ov5642.c +++ b/drivers/media/i2c/soc_camera/ov5642.c @@ -642,7 +642,7 @@ static const struct ov5642_datafmt static int reg_read(struct i2c_client *client, u16 reg, u8 *val) { int ret; - /* We have 16-bit i2c addresses - care for endianess */ + /* We have 16-bit i2c addresses - care for endianness */ unsigned char data[2] = { reg >> 8, reg & 0xff }; ret = i2c_master_send(client, data, 2); diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h index 2767c64df0c8..57f4688ea55b 100644 --- a/drivers/media/pci/cx18/cx18-driver.h +++ b/drivers/media/pci/cx18/cx18-driver.h @@ -262,7 +262,7 @@ struct cx18_options { }; /* per-mdl bit flags */ -#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianess swapped */ +#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianness swapped */ /* per-stream, s_flags */ #define CX18_F_S_CLAIMED 3 /* this stream is claimed */ diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c index e3fc2c71808a..95666eee7b27 100644 --- a/drivers/media/pci/cx23885/cx23885-417.c +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -427,7 +427,7 @@ int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value) cx_write(MC417_RWD, regval); /* Transition RD to effect read transaction across bus. - * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? + * Transition 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its * input only...) */ diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c index 8164d74b46a4..655d6854a8d7 100644 --- a/drivers/media/pci/pluto2/pluto2.c +++ b/drivers/media/pci/pluto2/pluto2.c @@ -401,7 +401,7 @@ static int pluto_hw_init(struct pluto *pluto) /* set automatic LED control by FPGA */ pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); - /* set data endianess */ + /* set data endianness */ #ifdef __LITTLE_ENDIAN pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); #else diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index bd72fb97fea5..61f3dbcc259f 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -1434,7 +1434,7 @@ static void coda_buf_queue(struct vb2_buffer *vb) if (q_data->fourcc == V4L2_PIX_FMT_H264 && vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { /* - * For backwards compatiblity, queuing an empty buffer marks + * For backwards compatibility, queuing an empty buffer marks * the stream end */ if (vb2_get_plane_payload(vb, 0) == 0) diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c index 3d66d88ea3a1..f7915695c907 100644 --- a/drivers/media/platform/exynos4-is/fimc-core.c +++ b/drivers/media/platform/exynos4-is/fimc-core.c @@ -1039,7 +1039,7 @@ static int fimc_runtime_resume(struct device *dev) dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state); - /* Enable clocks and perform basic initalization */ + /* Enable clocks and perform basic initialization */ clk_enable(fimc->clock[CLK_GATE]); fimc_hw_reset(fimc); diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index 7a4ee4c0449d..c1bce170df6f 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -759,7 +759,7 @@ static int fimc_md_register_platform_entity(struct fimc_md *fmd, goto dev_unlock; drvdata = dev_get_drvdata(dev); - /* Some subdev didn't probe succesfully id drvdata is NULL */ + /* Some subdev didn't probe successfully id drvdata is NULL */ if (drvdata) { switch (plat_entity) { case IDX_FIMC: diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index 1c3608039663..561bce8ffb1b 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -1673,7 +1673,7 @@ void omap3isp_print_status(struct isp_device *isp) * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in * resume(), and the the pipelines are restarted in complete(). * - * TODO: PM dependencies between the ISP and sensors are not modeled explicitly + * TODO: PM dependencies between the ISP and sensors are not modelled explicitly * yet. */ static int isp_pm_prepare(struct device *dev) diff --git a/drivers/media/platform/s5p-mfc/regs-mfc.h b/drivers/media/platform/s5p-mfc/regs-mfc.h index 9319e93599ae..6ccc3f8c122a 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc.h @@ -382,7 +382,7 @@ #define S5P_FIMV_R2H_CMD_EDFU_INIT_RET 16 #define S5P_FIMV_R2H_CMD_ERR_RET 32 -/* Dummy definition for MFCv6 compatibilty */ +/* Dummy definition for MFCv6 compatibility */ #define S5P_FIMV_CODEC_H264_MVC_DEC -1 #define S5P_FIMV_R2H_CMD_FIELD_DONE_RET -1 #define S5P_FIMV_MFC_RESET -1 diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 5f2c4ad6c2cb..e46067a57853 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -239,7 +239,7 @@ static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx) frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev); /* Copy timestamp / timecode from decoded src to dst and set - appropraite flags */ + appropriate flags */ src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); list_for_each_entry(dst_buf, &ctx->dst_queue, list) { if (vb2_dma_contig_plane_dma_addr(dst_buf->b, 0) == dec_y_addr) { @@ -428,7 +428,7 @@ static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev, case MFCINST_FINISHING: case MFCINST_FINISHED: case MFCINST_RUNNING: - /* It is higly probable that an error occured + /* It is highly probable that an error occurred * while decoding a frame */ clear_work_bit(ctx); ctx->state = MFCINST_ERROR; @@ -611,7 +611,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err); switch (reason) { case S5P_MFC_R2H_CMD_ERR_RET: - /* An error has occured */ + /* An error has occurred */ if (ctx->state == MFCINST_RUNNING && s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) >= dev->warn_start) @@ -840,7 +840,7 @@ static int s5p_mfc_open(struct file *file) mutex_unlock(&dev->mfc_mutex); mfc_debug_leave(); return ret; - /* Deinit when failure occured */ + /* Deinit when failure occurred */ err_queue_init: if (dev->num_inst == 1) s5p_mfc_deinit_hw(dev); @@ -881,14 +881,14 @@ static int s5p_mfc_release(struct file *file) /* Mark context as idle */ clear_work_bit_irqsave(ctx); /* If instance was initialised then - * return instance and free reosurces */ + * return instance and free resources */ if (ctx->inst_no != MFC_NO_INSTANCE_SET) { mfc_debug(2, "Has to free instance\n"); ctx->state = MFCINST_RETURN_INST; set_work_bit_irqsave(ctx); s5p_mfc_clean_ctx_int_flags(ctx); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); - /* Wait until instance is returned or timeout occured */ + /* Wait until instance is returned or timeout occurred */ if (s5p_mfc_wait_for_done_ctx (ctx, S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0)) { s5p_mfc_clock_off(); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index 7cab6849fb5b..2475a3c9a0a6 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -69,7 +69,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) } else { /* In this case bank2 can point to the same address as bank1. - * Firmware will always occupy the beggining of this area so it is + * Firmware will always occupy the beginning of this area so it is * impossible having a video frame buffer with zero address. */ dev->bank2 = dev->bank1; } diff --git a/drivers/media/platform/s5p-tv/mixer.h b/drivers/media/platform/s5p-tv/mixer.h index 04e6490a45be..fb2acc53112a 100644 --- a/drivers/media/platform/s5p-tv/mixer.h +++ b/drivers/media/platform/s5p-tv/mixer.h @@ -65,7 +65,7 @@ struct mxr_format { int num_subframes; /** specifies to which subframe belong given plane */ int plane2subframe[MXR_MAX_PLANES]; - /** internal code, driver dependant */ + /** internal code, driver dependent */ unsigned long cookie; }; diff --git a/drivers/media/platform/s5p-tv/mixer_video.c b/drivers/media/platform/s5p-tv/mixer_video.c index 641b1f071e06..81b97db111d8 100644 --- a/drivers/media/platform/s5p-tv/mixer_video.c +++ b/drivers/media/platform/s5p-tv/mixer_video.c @@ -528,7 +528,7 @@ static int mxr_s_dv_timings(struct file *file, void *fh, mutex_lock(&mdev->mutex); /* timings change cannot be done while there is an entity - * dependant on output configuration + * dependent on output configuration */ if (mdev->n_output > 0) { mutex_unlock(&mdev->mutex); @@ -585,7 +585,7 @@ static int mxr_s_std(struct file *file, void *fh, v4l2_std_id norm) mutex_lock(&mdev->mutex); /* standard change cannot be done while there is an entity - * dependant on output configuration + * dependent on output configuration */ if (mdev->n_output > 0) { mutex_unlock(&mdev->mutex); diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index 6769193c7c7b..74ce8b6b79fa 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -1495,7 +1495,7 @@ static int omap1_cam_set_bus_param(struct soc_camera_device *icd) if (ctrlclock & LCLK_EN) CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock); - /* select bus endianess */ + /* select bus endianness */ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); fmt = xlate->host_fmt; diff --git a/drivers/media/platform/vivi.c b/drivers/media/platform/vivi.c index 1d3f11965196..2d4e73b45c5e 100644 --- a/drivers/media/platform/vivi.c +++ b/drivers/media/platform/vivi.c @@ -1108,7 +1108,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) return 0; } -/* timeperframe is arbitrary and continous */ +/* timeperframe is arbitrary and continuous */ static int vidioc_enum_frameintervals(struct file *file, void *priv, struct v4l2_frmivalenum *fival) { @@ -1125,7 +1125,7 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv, fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS; - /* fill in stepwise (step=1.0 is requred by V4L2 spec) */ + /* fill in stepwise (step=1.0 is required by V4L2 spec) */ fival->stepwise.min = tpf_min; fival->stepwise.max = tpf_max; fival->stepwise.step = (struct v4l2_fract) {1, 1}; diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c index 1c9e771aa15c..d16bf0f41e24 100644 --- a/drivers/media/platform/vsp1/vsp1_drv.c +++ b/drivers/media/platform/vsp1/vsp1_drv.c @@ -323,7 +323,7 @@ static void vsp1_clocks_disable(struct vsp1_device *vsp1) * Increment the VSP1 reference count and initialize the device if the first * reference is taken. * - * Return a pointer to the VSP1 device or NULL if an error occured. + * Return a pointer to the VSP1 device or NULL if an error occurred. */ struct vsp1_device *vsp1_device_get(struct vsp1_device *vsp1) { diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c index 9c9084cb99f7..2fd9009f8663 100644 --- a/drivers/media/radio/radio-si476x.c +++ b/drivers/media/radio/radio-si476x.c @@ -268,8 +268,8 @@ struct si476x_radio; * * @tune_freq: Tune chip to a specific frequency * @seek_start: Star station seeking - * @rsq_status: Get Recieved Signal Quality(RSQ) status - * @rds_blckcnt: Get recived RDS blocks count + * @rsq_status: Get Received Signal Quality(RSQ) status + * @rds_blckcnt: Get received RDS blocks count * @phase_diversity: Change phase diversity mode of the tuner * @phase_div_status: Get phase diversity mode status * @acf_status: Get the status of Automatically Controlled diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 72e3fa652481..f329485c6629 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1370,7 +1370,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf) * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates * 0x688301b7 and the right one 0x688481b7. All other keys generate * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with - * reversed endianess. Extract direction from buffer, rotate endianess, + * reversed endianness. Extract direction from buffer, rotate endianness, * adjust sign and feed the values into stabilize(). The resulting codes * will be 0x01008000, 0x01007F00, which match the newer devices. */ diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 094484fac94c..a5d4f883d053 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -118,7 +118,7 @@ static int debug; #define RR3_IR_IO_LENGTH_FUZZ 0x04 /* Timeout for end of signal detection */ #define RR3_IR_IO_SIG_TIMEOUT 0x05 -/* Minumum value for pause recognition. */ +/* Minimum value for pause recognition. */ #define RR3_IR_IO_MIN_PAUSE 0x06 /* Clock freq. of EZ-USB chip */ diff --git a/drivers/media/tuners/mt2063.c b/drivers/media/tuners/mt2063.c index 2e1a02e360ff..20cca405bf45 100644 --- a/drivers/media/tuners/mt2063.c +++ b/drivers/media/tuners/mt2063.c @@ -1195,7 +1195,7 @@ static u32 mt2063_set_dnc_output_enable(struct mt2063_state *state, * DNC Output is selected, the other is always off) * * @state: ptr to mt2063_state structure - * @Mode: desired reciever delivery system + * @Mode: desired receiver delivery system * * Note: Register cache must be valid for it to work */ @@ -2119,7 +2119,7 @@ static int mt2063_set_analog_params(struct dvb_frontend *fe, /* * As defined on EN 300 429, the DVB-C roll-off factor is 0.15. - * So, the amount of the needed bandwith is given by: + * So, the amount of the needed bandwidth is given by: * Bw = Symbol_rate * (1 + 0.15) * As such, the maximum symbol rate supported by 6 MHz is given by: * max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds diff --git a/drivers/media/tuners/tuner-xc2028-types.h b/drivers/media/tuners/tuner-xc2028-types.h index 74dc46a71f64..7e4798783db7 100644 --- a/drivers/media/tuners/tuner-xc2028-types.h +++ b/drivers/media/tuners/tuner-xc2028-types.h @@ -119,7 +119,7 @@ #define V4L2_STD_A2 (V4L2_STD_A2_A | V4L2_STD_A2_B) #define V4L2_STD_NICAM (V4L2_STD_NICAM_A | V4L2_STD_NICAM_B) -/* To preserve backward compatibilty, +/* To preserve backward compatibility, (std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 2627553f7de1..08240e498451 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -266,7 +266,7 @@ static int mxl111sf_adap_fe_init(struct dvb_frontend *fe) struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; int err; - /* exit if we didnt initialize the driver yet */ + /* exit if we didn't initialize the driver yet */ if (!state->chip_id) { mxl_debug("driver not yet initialized, exit."); goto fail; @@ -322,7 +322,7 @@ static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe) struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; int err; - /* exit if we didnt initialize the driver yet */ + /* exit if we didn't initialize the driver yet */ if (!state->chip_id) { mxl_debug("driver not yet initialized, exit."); goto fail; diff --git a/drivers/media/usb/gspca/gl860/gl860.c b/drivers/media/usb/gspca/gl860/gl860.c index cb1e64ca59c9..cea8d7f51c3c 100644 --- a/drivers/media/usb/gspca/gl860/gl860.c +++ b/drivers/media/usb/gspca/gl860/gl860.c @@ -438,7 +438,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, s32 nToSkip = sd->swapRB * (gspca_dev->cam.cam_mode[mode].bytesperline + 1); - /* Test only against 0202h, so endianess does not matter */ + /* Test only against 0202h, so endianness does not matter */ switch (*(s16 *) data) { case 0x0202: /* End of frame, start a new one */ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); diff --git a/drivers/media/usb/gspca/pac207.c b/drivers/media/usb/gspca/pac207.c index cd79c180f67b..07529e5a0c56 100644 --- a/drivers/media/usb/gspca/pac207.c +++ b/drivers/media/usb/gspca/pac207.c @@ -416,7 +416,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, #if IS_ENABLED(CONFIG_INPUT) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ - int len) /* interrput packet length */ + int len) /* interrupt packet length */ { int ret = -EINVAL; diff --git a/drivers/media/usb/gspca/pac7302.c b/drivers/media/usb/gspca/pac7302.c index a91509643563..2fd1c5e31a0f 100644 --- a/drivers/media/usb/gspca/pac7302.c +++ b/drivers/media/usb/gspca/pac7302.c @@ -874,7 +874,7 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, #if IS_ENABLED(CONFIG_INPUT) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ - int len) /* interrput packet length */ + int len) /* interrupt packet length */ { int ret = -EINVAL; u8 data0, data1; diff --git a/drivers/media/usb/gspca/stv0680.c b/drivers/media/usb/gspca/stv0680.c index 9c0827631b9c..7f94ec74282e 100644 --- a/drivers/media/usb/gspca/stv0680.c +++ b/drivers/media/usb/gspca/stv0680.c @@ -139,7 +139,7 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam = &gspca_dev->cam; - /* Give the camera some time to settle, otherwise initalization will + /* Give the camera some time to settle, otherwise initialization will fail on hotplug, and yes it really needs a full second. */ msleep(1000); diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c index 7b95d8e88a20..d3e1b6d8bf49 100644 --- a/drivers/media/usb/gspca/zc3xx.c +++ b/drivers/media/usb/gspca/zc3xx.c @@ -6905,7 +6905,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, #if IS_ENABLED(CONFIG_INPUT) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ - int len) /* interrput packet length */ + int len) /* interrupt packet length */ { if (len == 8 && data[4] == 1) { input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c index 77bbf7889659..78c9bc8e7f56 100644 --- a/drivers/media/usb/pwc/pwc-if.c +++ b/drivers/media/usb/pwc/pwc-if.c @@ -1039,7 +1039,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id /* Set the leds off */ pwc_set_leds(pdev, 0, 0); - /* Setup intial videomode */ + /* Setup initial videomode */ rc = pwc_set_video_mode(pdev, MAX_WIDTH, MAX_HEIGHT, V4L2_PIX_FMT_YUV420, 30, &compression, 1); if (rc) diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 899cb6d1c4a4..898c208889cd 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -556,7 +556,7 @@ static u16 uvc_video_clock_host_sof(const struct uvc_clock_sample *sample) * * SOF = ((SOF2 - SOF1) * PTS + SOF1 * STC2 - SOF2 * STC1) / (STC2 - STC1) (1) * - * to avoid loosing precision in the division. Similarly, the host timestamp is + * to avoid losing precision in the division. Similarly, the host timestamp is * computed with * * TS = ((TS2 - TS1) * PTS + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1) (2) diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index 60dcc0f3b32e..fb46790d0eca 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -420,7 +420,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id) "Advanced Simple", "Core", "Simple Scalable", - "Advanced Coding Efficency", + "Advanced Coding Efficiency", NULL, }; -- cgit v1.2.3 From 20e5d580195cd4200b0f92d8007784b28c61b235 Mon Sep 17 00:00:00 2001 From: Georg Kaindl Date: Mon, 21 Oct 2013 12:01:36 -0300 Subject: [media] usbtv: Add support for PAL video source Signed-off-by: Georg Kaindl Tested-by: Lubomir Rintel Tested-by: Marcin Nowak Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/usbtv/usbtv.c | 174 +++++++++++++++++++++++++++++++--------- 1 file changed, 136 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/usbtv/usbtv.c b/drivers/media/usb/usbtv/usbtv.c index 8a505a90d318..6222a4ab1e00 100644 --- a/drivers/media/usb/usbtv/usbtv.c +++ b/drivers/media/usb/usbtv/usbtv.c @@ -50,13 +50,8 @@ #define USBTV_ISOC_TRANSFERS 16 #define USBTV_ISOC_PACKETS 8 -#define USBTV_WIDTH 720 -#define USBTV_HEIGHT 480 - #define USBTV_CHUNK_SIZE 256 #define USBTV_CHUNK 240 -#define USBTV_CHUNKS (USBTV_WIDTH * USBTV_HEIGHT \ - / 4 / USBTV_CHUNK) /* Chunk header. */ #define USBTV_MAGIC_OK(chunk) ((be32_to_cpu(chunk[0]) & 0xff000000) \ @@ -65,6 +60,27 @@ #define USBTV_ODD(chunk) ((be32_to_cpu(chunk[0]) & 0x0000f000) >> 15) #define USBTV_CHUNK_NO(chunk) (be32_to_cpu(chunk[0]) & 0x00000fff) +#define USBTV_TV_STD (V4L2_STD_525_60 | V4L2_STD_PAL) + +/* parameters for supported TV norms */ +struct usbtv_norm_params { + v4l2_std_id norm; + int cap_width, cap_height; +}; + +static struct usbtv_norm_params norm_params[] = { + { + .norm = V4L2_STD_525_60, + .cap_width = 720, + .cap_height = 480, + }, + { + .norm = V4L2_STD_PAL, + .cap_width = 720, + .cap_height = 576, + } +}; + /* A single videobuf2 frame buffer. */ struct usbtv_buf { struct vb2_buffer vb; @@ -94,11 +110,38 @@ struct usbtv { USBTV_COMPOSITE_INPUT, USBTV_SVIDEO_INPUT, } input; + v4l2_std_id norm; + int width, height; + int n_chunks; int iso_size; unsigned int sequence; struct urb *isoc_urbs[USBTV_ISOC_TRANSFERS]; }; +static int usbtv_configure_for_norm(struct usbtv *usbtv, v4l2_std_id norm) +{ + int i, ret = 0; + struct usbtv_norm_params *params = NULL; + + for (i = 0; i < ARRAY_SIZE(norm_params); i++) { + if (norm_params[i].norm & norm) { + params = &norm_params[i]; + break; + } + } + + if (params) { + usbtv->width = params->cap_width; + usbtv->height = params->cap_height; + usbtv->n_chunks = usbtv->width * usbtv->height + / 4 / USBTV_CHUNK; + usbtv->norm = params->norm; + } else + ret = -EINVAL; + + return ret; +} + static int usbtv_set_regs(struct usbtv *usbtv, const u16 regs[][2], int size) { int ret; @@ -158,6 +201,57 @@ static int usbtv_select_input(struct usbtv *usbtv, int input) return ret; } +static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm) +{ + int ret; + static const u16 pal[][2] = { + { USBTV_BASE + 0x001a, 0x0068 }, + { USBTV_BASE + 0x010e, 0x0072 }, + { USBTV_BASE + 0x010f, 0x00a2 }, + { USBTV_BASE + 0x0112, 0x00b0 }, + { USBTV_BASE + 0x0117, 0x0001 }, + { USBTV_BASE + 0x0118, 0x002c }, + { USBTV_BASE + 0x012d, 0x0010 }, + { USBTV_BASE + 0x012f, 0x0020 }, + { USBTV_BASE + 0x024f, 0x0002 }, + { USBTV_BASE + 0x0254, 0x0059 }, + { USBTV_BASE + 0x025a, 0x0016 }, + { USBTV_BASE + 0x025b, 0x0035 }, + { USBTV_BASE + 0x0263, 0x0017 }, + { USBTV_BASE + 0x0266, 0x0016 }, + { USBTV_BASE + 0x0267, 0x0036 } + }; + + static const u16 ntsc[][2] = { + { USBTV_BASE + 0x001a, 0x0079 }, + { USBTV_BASE + 0x010e, 0x0068 }, + { USBTV_BASE + 0x010f, 0x009c }, + { USBTV_BASE + 0x0112, 0x00f0 }, + { USBTV_BASE + 0x0117, 0x0000 }, + { USBTV_BASE + 0x0118, 0x00fc }, + { USBTV_BASE + 0x012d, 0x0004 }, + { USBTV_BASE + 0x012f, 0x0008 }, + { USBTV_BASE + 0x024f, 0x0001 }, + { USBTV_BASE + 0x0254, 0x005f }, + { USBTV_BASE + 0x025a, 0x0012 }, + { USBTV_BASE + 0x025b, 0x0001 }, + { USBTV_BASE + 0x0263, 0x001c }, + { USBTV_BASE + 0x0266, 0x0011 }, + { USBTV_BASE + 0x0267, 0x0005 } + }; + + ret = usbtv_configure_for_norm(usbtv, norm); + + if (!ret) { + if (norm & V4L2_STD_525_60) + ret = usbtv_set_regs(usbtv, ntsc, ARRAY_SIZE(ntsc)); + else if (norm & V4L2_STD_PAL) + ret = usbtv_set_regs(usbtv, pal, ARRAY_SIZE(pal)); + } + + return ret; +} + static int usbtv_setup_capture(struct usbtv *usbtv) { int ret; @@ -225,26 +319,11 @@ static int usbtv_setup_capture(struct usbtv *usbtv) { USBTV_BASE + 0x0284, 0x0088 }, { USBTV_BASE + 0x0003, 0x0004 }, - { USBTV_BASE + 0x001a, 0x0079 }, { USBTV_BASE + 0x0100, 0x00d3 }, - { USBTV_BASE + 0x010e, 0x0068 }, - { USBTV_BASE + 0x010f, 0x009c }, - { USBTV_BASE + 0x0112, 0x00f0 }, { USBTV_BASE + 0x0115, 0x0015 }, - { USBTV_BASE + 0x0117, 0x0000 }, - { USBTV_BASE + 0x0118, 0x00fc }, - { USBTV_BASE + 0x012d, 0x0004 }, - { USBTV_BASE + 0x012f, 0x0008 }, { USBTV_BASE + 0x0220, 0x002e }, { USBTV_BASE + 0x0225, 0x0008 }, { USBTV_BASE + 0x024e, 0x0002 }, - { USBTV_BASE + 0x024f, 0x0001 }, - { USBTV_BASE + 0x0254, 0x005f }, - { USBTV_BASE + 0x025a, 0x0012 }, - { USBTV_BASE + 0x025b, 0x0001 }, - { USBTV_BASE + 0x0263, 0x001c }, - { USBTV_BASE + 0x0266, 0x0011 }, - { USBTV_BASE + 0x0267, 0x0005 }, { USBTV_BASE + 0x024e, 0x0002 }, { USBTV_BASE + 0x024f, 0x0002 }, }; @@ -253,6 +332,10 @@ static int usbtv_setup_capture(struct usbtv *usbtv) if (ret) return ret; + ret = usbtv_select_norm(usbtv, usbtv->norm); + if (ret) + return ret; + ret = usbtv_select_input(usbtv, usbtv->input); if (ret) return ret; @@ -296,7 +379,7 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) frame_id = USBTV_FRAME_ID(chunk); odd = USBTV_ODD(chunk); chunk_no = USBTV_CHUNK_NO(chunk); - if (chunk_no >= USBTV_CHUNKS) + if (chunk_no >= usbtv->n_chunks) return; /* Beginning of a frame. */ @@ -324,10 +407,10 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) usbtv->chunks_done++; /* Last chunk in a frame, signalling an end */ - if (odd && chunk_no == USBTV_CHUNKS-1) { + if (odd && chunk_no == usbtv->n_chunks-1) { int size = vb2_plane_size(&buf->vb, 0); enum vb2_buffer_state state = usbtv->chunks_done == - USBTV_CHUNKS ? + usbtv->n_chunks ? VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR; @@ -500,6 +583,8 @@ static int usbtv_querycap(struct file *file, void *priv, static int usbtv_enum_input(struct file *file, void *priv, struct v4l2_input *i) { + struct usbtv *dev = video_drvdata(file); + switch (i->index) { case USBTV_COMPOSITE_INPUT: strlcpy(i->name, "Composite", sizeof(i->name)); @@ -512,7 +597,7 @@ static int usbtv_enum_input(struct file *file, void *priv, } i->type = V4L2_INPUT_TYPE_CAMERA; - i->std = V4L2_STD_525_60; + i->std = dev->vdev.tvnorms; return 0; } @@ -531,23 +616,37 @@ static int usbtv_enum_fmt_vid_cap(struct file *file, void *priv, static int usbtv_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - f->fmt.pix.width = USBTV_WIDTH; - f->fmt.pix.height = USBTV_HEIGHT; + struct usbtv *usbtv = video_drvdata(file); + + f->fmt.pix.width = usbtv->width; + f->fmt.pix.height = usbtv->height; f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; f->fmt.pix.field = V4L2_FIELD_INTERLACED; - f->fmt.pix.bytesperline = USBTV_WIDTH * 2; + f->fmt.pix.bytesperline = usbtv->width * 2; f->fmt.pix.sizeimage = (f->fmt.pix.bytesperline * f->fmt.pix.height); f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - f->fmt.pix.priv = 0; + return 0; } static int usbtv_g_std(struct file *file, void *priv, v4l2_std_id *norm) { - *norm = V4L2_STD_525_60; + struct usbtv *usbtv = video_drvdata(file); + *norm = usbtv->norm; return 0; } +static int usbtv_s_std(struct file *file, void *priv, v4l2_std_id norm) +{ + int ret = -EINVAL; + struct usbtv *usbtv = video_drvdata(file); + + if ((norm & V4L2_STD_525_60) || (norm & V4L2_STD_PAL)) + ret = usbtv_select_norm(usbtv, norm); + + return ret; +} + static int usbtv_g_input(struct file *file, void *priv, unsigned int *i) { struct usbtv *usbtv = video_drvdata(file); @@ -561,13 +660,6 @@ static int usbtv_s_input(struct file *file, void *priv, unsigned int i) return usbtv_select_input(usbtv, i); } -static int usbtv_s_std(struct file *file, void *priv, v4l2_std_id norm) -{ - if (norm & V4L2_STD_525_60) - return 0; - return -EINVAL; -} - struct v4l2_ioctl_ops usbtv_ioctl_ops = { .vidioc_querycap = usbtv_querycap, .vidioc_enum_input = usbtv_enum_input, @@ -604,10 +696,12 @@ static int usbtv_queue_setup(struct vb2_queue *vq, const struct v4l2_format *v4l_fmt, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) { + struct usbtv *usbtv = vb2_get_drv_priv(vq); + if (*nbuffers < 2) *nbuffers = 2; *nplanes = 1; - sizes[0] = USBTV_WIDTH * USBTV_HEIGHT / 2 * sizeof(u32); + sizes[0] = USBTV_CHUNK * usbtv->n_chunks * 2 * sizeof(u32); return 0; } @@ -690,7 +784,11 @@ static int usbtv_probe(struct usb_interface *intf, return -ENOMEM; usbtv->dev = dev; usbtv->udev = usb_get_dev(interface_to_usbdev(intf)); + usbtv->iso_size = size; + + (void)usbtv_configure_for_norm(usbtv, V4L2_STD_525_60); + spin_lock_init(&usbtv->buflock); mutex_init(&usbtv->v4l2_lock); mutex_init(&usbtv->vb2q_lock); @@ -727,7 +825,7 @@ static int usbtv_probe(struct usb_interface *intf, usbtv->vdev.release = video_device_release_empty; usbtv->vdev.fops = &usbtv_fops; usbtv->vdev.ioctl_ops = &usbtv_ioctl_ops; - usbtv->vdev.tvnorms = V4L2_STD_525_60; + usbtv->vdev.tvnorms = USBTV_TV_STD; usbtv->vdev.queue = &usbtv->vb2q; usbtv->vdev.lock = &usbtv->v4l2_lock; set_bit(V4L2_FL_USE_FH_PRIO, &usbtv->vdev.flags); -- cgit v1.2.3 From bdee6bdb67e84aaf26a163aced908f4ab6bbd06b Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Wed, 6 Nov 2013 05:39:35 -0300 Subject: [media] em28xx-video: Swap release order to avoid lock nesting vb2_fop_release might take the video queue mutex lock. In order to avoid nesting mutexes the private mutex is taken after the fop_release has finished. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index fc5d60efd4ab..dd19c9ff76e0 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -1664,8 +1664,8 @@ static int em28xx_v4l2_close(struct file *filp) em28xx_videodbg("users=%d\n", dev->users); - mutex_lock(&dev->lock); vb2_fop_release(filp); + mutex_lock(&dev->lock); if (dev->users == 1) { /* the device is already disconnect, -- cgit v1.2.3 From 06eb891edb4009245278a0ae50ccfd6fc99004d2 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Wed, 6 Nov 2013 11:40:18 -0300 Subject: [media] ths7303: Declare as static a private function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit git grep shows that the function is only called from ths7303.c Fix this build warning: CC drivers/media/i2c/ths7303.o drivers/media/i2c/ths7303.c:86:5: warning: no previous prototype for ‘ths7303_setval’ [-Wmissing-prototypes] int ths7303_setval(struct v4l2_subdev *sd, enum ths7303_filter_mode mode) ^ Signed-off-by: Ricardo Ribalda Delgado Acked-by: Laurent Pinchart Acked-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/ths7303.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/i2c/ths7303.c b/drivers/media/i2c/ths7303.c index 42276d93624c..ed9ae8875348 100644 --- a/drivers/media/i2c/ths7303.c +++ b/drivers/media/i2c/ths7303.c @@ -83,7 +83,8 @@ static int ths7303_write(struct v4l2_subdev *sd, u8 reg, u8 val) } /* following function is used to set ths7303 */ -int ths7303_setval(struct v4l2_subdev *sd, enum ths7303_filter_mode mode) +static int ths7303_setval(struct v4l2_subdev *sd, + enum ths7303_filter_mode mode) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ths7303_state *state = to_state(sd); -- cgit v1.2.3 From 326f5a3fc502f96bce991bedd1957adc2758dba9 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Tue, 5 Nov 2013 05:29:07 -0300 Subject: [media] media: marvell-ccic: use devm to release clk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch uses devm to release the clks instead of releasing manually. And it adds enable/disable mipi_clk when getting its rate. Signed-off-by: Libin Yang Acked-by: Jonathan Corbet Acked-by: Uwe Kleine-König Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/marvell-ccic/mmp-driver.c | 39 +++++------------------- 1 file changed, 8 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index 70cb57f3adc2..054507f16734 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -142,12 +142,6 @@ static int mmpcam_power_up(struct mcam_camera *mcam) struct mmp_camera *cam = mcam_to_cam(mcam); struct mmp_camera_platform_data *pdata; - if (mcam->bus_type == V4L2_MBUS_CSI2) { - cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); - if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) - return PTR_ERR(cam->mipi_clk); - } - /* * Turn on power and clocks to the controller. */ @@ -186,12 +180,6 @@ static void mmpcam_power_down(struct mcam_camera *mcam) gpio_set_value(pdata->sensor_power_gpio, 0); gpio_set_value(pdata->sensor_reset_gpio, 0); - if (mcam->bus_type == V4L2_MBUS_CSI2 && !IS_ERR(cam->mipi_clk)) { - if (cam->mipi_clk) - devm_clk_put(mcam->dev, cam->mipi_clk); - cam->mipi_clk = NULL; - } - mcam_clk_disable(mcam); } @@ -292,8 +280,9 @@ void mmpcam_calc_dphy(struct mcam_camera *mcam) return; /* get the escape clk, this is hard coded */ + clk_prepare_enable(cam->mipi_clk); tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12; - + clk_disable_unprepare(cam->mipi_clk); /* * dphy[2] - CSI2_DPHY6: * bit 0 ~ bit 7: CK Term Enable @@ -325,19 +314,6 @@ static irqreturn_t mmpcam_irq(int irq, void *data) return IRQ_RETVAL(handled); } -static void mcam_deinit_clk(struct mcam_camera *mcam) -{ - unsigned int i; - - for (i = 0; i < NR_MCAM_CLK; i++) { - if (!IS_ERR(mcam->clk[i])) { - if (mcam->clk[i]) - devm_clk_put(mcam->dev, mcam->clk[i]); - } - mcam->clk[i] = NULL; - } -} - static void mcam_init_clk(struct mcam_camera *mcam) { unsigned int i; @@ -371,7 +347,6 @@ static int mmpcam_probe(struct platform_device *pdev) if (cam == NULL) return -ENOMEM; cam->pdev = pdev; - cam->mipi_clk = NULL; INIT_LIST_HEAD(&cam->devlist); mcam = &cam->mcam; @@ -387,6 +362,11 @@ static int mmpcam_probe(struct platform_device *pdev) mcam->mclk_div = pdata->mclk_div; mcam->bus_type = pdata->bus_type; mcam->dphy = pdata->dphy; + if (mcam->bus_type == V4L2_MBUS_CSI2) { + cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); + if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) + return PTR_ERR(cam->mipi_clk); + } mcam->mipi_enabled = false; mcam->lane = pdata->lane; mcam->chip_id = MCAM_ARMADA610; @@ -444,7 +424,7 @@ static int mmpcam_probe(struct platform_device *pdev) */ ret = mmpcam_power_up(mcam); if (ret) - goto out_deinit_clk; + return ret; ret = mccic_register(mcam); if (ret) goto out_power_down; @@ -469,8 +449,6 @@ out_unregister: mccic_shutdown(mcam); out_power_down: mmpcam_power_down(mcam); -out_deinit_clk: - mcam_deinit_clk(mcam); return ret; } @@ -482,7 +460,6 @@ static int mmpcam_remove(struct mmp_camera *cam) mmpcam_remove_device(cam); mccic_shutdown(mcam); mmpcam_power_down(mcam); - mcam_deinit_clk(mcam); return 0; } -- cgit v1.2.3 From eed5b0cfb4f1ac0715106b79b24f19fad6000416 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 21 Oct 2013 16:56:36 -0300 Subject: [media] rtl2830: add parent for I2C adapter i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered BUG: unable to handle kernel NULL pointer dereference at 0000000000000220 IP: [] i2c_register_adapter+0x130/0x390 [i2c_core] Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/rtl2830.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c index 7efb796c472c..50e8b63e5169 100644 --- a/drivers/media/dvb-frontends/rtl2830.c +++ b/drivers/media/dvb-frontends/rtl2830.c @@ -710,6 +710,7 @@ struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg, sizeof(priv->tuner_i2c_adapter.name)); priv->tuner_i2c_adapter.algo = &rtl2830_tuner_i2c_algo; priv->tuner_i2c_adapter.algo_data = NULL; + priv->tuner_i2c_adapter.dev.parent = &i2c->dev; i2c_set_adapdata(&priv->tuner_i2c_adapter, priv); if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) { dev_err(&i2c->dev, -- cgit v1.2.3 From 3d8b24d27808e6ab95eae70cb15315051a7f90eb Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 18 Oct 2013 00:07:11 -0300 Subject: [media] mt9p031: Include linux/of.h header 'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/mt9p031.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index 4734836fe5a4..1c2303d18bf4 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From a5e3d743cb6ed2d73546eaf070138202c0c64a6f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 4 Dec 2013 15:14:05 +0100 Subject: [media] vb2: regression fix: always set length field. Commit dc77523c5da5513df1bbc74db2a522a94f4cec0e ensured that m.offset is only set for the MMAP memory mode by calling __setup_offsets only for that mode. However, __setup_offsets also initializes the length fields, and that should be done regardless of the memory mode. Because of that change the v4l2-ctl test application fails for the USERPTR mode. This fix creates a __setup_lengths function that sets the length, and __setup_offsets just sets the offset and no longer touches the length. Signed-off-by: Hans Verkuil Acked-by: Marek Szyprowski --- drivers/media/v4l2-core/videobuf2-core.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 57ba131f08ad..0edc165f418d 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -144,6 +144,25 @@ static void __vb2_buf_dmabuf_put(struct vb2_buffer *vb) __vb2_plane_dmabuf_put(q, &vb->planes[plane]); } +/** + * __setup_lengths() - setup initial lengths for every plane in + * every buffer on the queue + */ +static void __setup_lengths(struct vb2_queue *q, unsigned int n) +{ + unsigned int buffer, plane; + struct vb2_buffer *vb; + + for (buffer = q->num_buffers; buffer < q->num_buffers + n; ++buffer) { + vb = q->bufs[buffer]; + if (!vb) + continue; + + for (plane = 0; plane < vb->num_planes; ++plane) + vb->v4l2_planes[plane].length = q->plane_sizes[plane]; + } +} + /** * __setup_offsets() - setup unique offsets ("cookies") for every plane in * every buffer on the queue @@ -169,7 +188,6 @@ static void __setup_offsets(struct vb2_queue *q, unsigned int n) continue; for (plane = 0; plane < vb->num_planes; ++plane) { - vb->v4l2_planes[plane].length = q->plane_sizes[plane]; vb->v4l2_planes[plane].m.mem_offset = off; dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n", @@ -241,6 +259,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum v4l2_memory memory, q->bufs[q->num_buffers + buffer] = vb; } + __setup_lengths(q, buffer); if (memory == V4L2_MEMORY_MMAP) __setup_offsets(q, buffer); -- cgit v1.2.3 From 64c832a4f79542809d6c10b8ec6225ff8b76092e Mon Sep 17 00:00:00 2001 From: "Geyslan G. Bem" Date: Wed, 20 Nov 2013 18:02:52 -0300 Subject: [media] videobuf2-dma-sg: fix possible memory leak Fix the return when 'buf->pages' allocation error. Signed-off-by: Geyslan G. Bem Signed-off-by: Hans Verkuil --- drivers/media/v4l2-core/videobuf2-dma-sg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c index 2f860543912c..0d3a8ffe47a3 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c @@ -178,7 +178,7 @@ static void *vb2_dma_sg_get_userptr(void *alloc_ctx, unsigned long vaddr, buf->pages = kzalloc(buf->num_pages * sizeof(struct page *), GFP_KERNEL); if (!buf->pages) - return NULL; + goto userptr_fail_alloc_pages; num_pages_from_user = get_user_pages(current, current->mm, vaddr & PAGE_MASK, @@ -204,6 +204,7 @@ userptr_fail_get_user_pages: while (--num_pages_from_user >= 0) put_page(buf->pages[num_pages_from_user]); kfree(buf->pages); +userptr_fail_alloc_pages: kfree(buf); return NULL; } -- cgit v1.2.3