From 6b6204ee92adb53bfd6a77cb5679282ec3820c4b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 9 May 2013 09:48:30 +1000 Subject: md: md_stop_writes() should always freeze recovery. __md_stop_writes() will currently sometimes freeze recovery. So any caller must be ready for that to happen, and indeed they are. However if __md_stop_writes() doesn't freeze_recovery, then a recovery could start before mddev_suspend() is called, which could be awkward. This can particularly cause problems or dm-raid. So change __md_stop_writes() to always freeze recovery. This is safe and more predicatable. Reported-by: Brassow Jonathan Tested-by: Brassow Jonathan Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 4c74424c78b0..3e2acfa1696d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5277,8 +5277,8 @@ static void md_clean(struct mddev *mddev) static void __md_stop_writes(struct mddev *mddev) { + set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); if (mddev->sync_thread) { - set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_reap_sync_thread(mddev); } -- cgit v1.2.3 From 3056e3aec8d8ba61a0710fb78b2d562600aa2ea7 Mon Sep 17 00:00:00 2001 From: Alex Lyakas Date: Tue, 4 Jun 2013 20:42:21 +0300 Subject: md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. Without that fix, the following scenario could happen: - RAID1 with drives A and B; drive B was freshly-added and is rebuilding - Drive A fails - WRITE request arrives to the array. It is failed by drive A, so r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B succeeds in writing it, so the same r1_bio is marked as R1BIO_Uptodate. - r1_bio arrives to handle_write_finished, badblocks are disabled, md_error()->error() does nothing because we don't fail the last drive of raid1 - raid_end_bio_io() calls call_bio_endio() - As a result, in call_bio_endio(): if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) clear_bit(BIO_UPTODATE, &bio->bi_flags); this code doesn't clear the BIO_UPTODATE flag, and the whole master WRITE succeeds, back to the upper layer. So we returned success to the upper layer, even though we had written the data onto the rebuilding drive only. But when we want to read the data back, we would not read from the rebuilding drive, so this data is lost. [neilb - applied identical change to raid10 as well] This bug can result in lost data, so it is suitable for any -stable kernel. Cc: stable@vger.kernel.org Signed-off-by: Alex Lyakas Signed-off-by: NeilBrown --- drivers/md/raid1.c | 12 +++++++++++- drivers/md/raid10.c | 12 +++++++++++- 2 files changed, 22 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 851023e2ba5d..f2db7a9d5964 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -427,7 +427,17 @@ static void raid1_end_write_request(struct bio *bio, int error) r1_bio->bios[mirror] = NULL; to_put = bio; - set_bit(R1BIO_Uptodate, &r1_bio->state); + /* + * Do not set R1BIO_Uptodate if the current device is + * rebuilding or Faulty. This is because we cannot use + * such device for properly reading the data back (we could + * potentially use it, if the current write would have felt + * before rdev->recovery_offset, but for simplicity we don't + * check this here. + */ + if (test_bit(In_sync, &conf->mirrors[mirror].rdev->flags) && + !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags)) + set_bit(R1BIO_Uptodate, &r1_bio->state); /* Maybe we can clear some bad blocks. */ if (is_badblock(conf->mirrors[mirror].rdev, diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 018741ba9310..8000ee25650d 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -490,7 +490,17 @@ static void raid10_end_write_request(struct bio *bio, int error) sector_t first_bad; int bad_sectors; - set_bit(R10BIO_Uptodate, &r10_bio->state); + /* + * Do not set R10BIO_Uptodate if the current device is + * rebuilding or Faulty. This is because we cannot use + * such device for properly reading the data back (we could + * potentially use it, if the current write would have felt + * before rdev->recovery_offset, but for simplicity we don't + * check this here. + */ + if (test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags)) + set_bit(R10BIO_Uptodate, &r10_bio->state); /* Maybe we can clear some bad blocks. */ if (is_badblock(rdev, -- cgit v1.2.3 From e2d59925221cd562e07fee38ec8839f7209ae603 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 12 Jun 2013 11:01:22 +1000 Subject: md/raid1,raid10: use freeze_array in place of raise_barrier in various places. Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas Signed-off-by: NeilBrown --- drivers/md/raid1.c | 22 +++++++++++----------- drivers/md/raid10.c | 14 +++++++------- 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index f2db7a9d5964..5208e9d1aff0 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -890,17 +890,17 @@ static void allow_barrier(struct r1conf *conf) wake_up(&conf->wait_barrier); } -static void freeze_array(struct r1conf *conf) +static void freeze_array(struct r1conf *conf, int extra) { /* stop syncio and normal IO and wait for everything to * go quite. * We increment barrier and nr_waiting, and then - * wait until nr_pending match nr_queued+1 + * wait until nr_pending match nr_queued+extra * This is called in the context of one normal IO request * that has failed. Thus any sync request that might be pending * will be blocked by nr_pending, and we need to wait for * pending IO requests to complete or be queued for re-try. - * Thus the number queued (nr_queued) plus this request (1) + * Thus the number queued (nr_queued) plus this request (extra) * must match the number of pending IOs (nr_pending) before * we continue. */ @@ -908,7 +908,7 @@ static void freeze_array(struct r1conf *conf) conf->barrier++; conf->nr_waiting++; wait_event_lock_irq_cmd(conf->wait_barrier, - conf->nr_pending == conf->nr_queued+1, + conf->nr_pending == conf->nr_queued+extra, conf->resync_lock, flush_pending_writes(conf)); spin_unlock_irq(&conf->resync_lock); @@ -1568,8 +1568,8 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev) * we wait for all outstanding requests to complete. */ synchronize_sched(); - raise_barrier(conf); - lower_barrier(conf); + freeze_array(conf, 0); + unfreeze_array(conf); clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); @@ -1619,11 +1619,11 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev) */ struct md_rdev *repl = conf->mirrors[conf->raid_disks + number].rdev; - raise_barrier(conf); + freeze_array(conf, 0); clear_bit(Replacement, &repl->flags); p->rdev = repl; conf->mirrors[conf->raid_disks + number].rdev = NULL; - lower_barrier(conf); + unfreeze_array(conf); clear_bit(WantReplacement, &rdev->flags); } else clear_bit(WantReplacement, &rdev->flags); @@ -2240,7 +2240,7 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) * frozen */ if (mddev->ro == 0) { - freeze_array(conf); + freeze_array(conf, 1); fix_read_error(conf, r1_bio->read_disk, r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); @@ -3020,7 +3020,7 @@ static int raid1_reshape(struct mddev *mddev) return -ENOMEM; } - raise_barrier(conf); + freeze_array(conf, 0); /* ok, everything is stopped */ oldpool = conf->r1bio_pool; @@ -3051,7 +3051,7 @@ static int raid1_reshape(struct mddev *mddev) conf->raid_disks = mddev->raid_disks = raid_disks; mddev->delta_disks = 0; - lower_barrier(conf); + unfreeze_array(conf); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8000ee25650d..aa9ed304951e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1065,17 +1065,17 @@ static void allow_barrier(struct r10conf *conf) wake_up(&conf->wait_barrier); } -static void freeze_array(struct r10conf *conf) +static void freeze_array(struct r10conf *conf, int extra) { /* stop syncio and normal IO and wait for everything to * go quiet. * We increment barrier and nr_waiting, and then - * wait until nr_pending match nr_queued+1 + * wait until nr_pending match nr_queued+extra * This is called in the context of one normal IO request * that has failed. Thus any sync request that might be pending * will be blocked by nr_pending, and we need to wait for * pending IO requests to complete or be queued for re-try. - * Thus the number queued (nr_queued) plus this request (1) + * Thus the number queued (nr_queued) plus this request (extra) * must match the number of pending IOs (nr_pending) before * we continue. */ @@ -1083,7 +1083,7 @@ static void freeze_array(struct r10conf *conf) conf->barrier++; conf->nr_waiting++; wait_event_lock_irq_cmd(conf->wait_barrier, - conf->nr_pending == conf->nr_queued+1, + conf->nr_pending == conf->nr_queued+extra, conf->resync_lock, flush_pending_writes(conf)); @@ -1849,8 +1849,8 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev) * we wait for all outstanding requests to complete. */ synchronize_sched(); - raise_barrier(conf, 0); - lower_barrier(conf); + freeze_array(conf, 0); + unfreeze_array(conf); clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); @@ -2646,7 +2646,7 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio) r10_bio->devs[slot].bio = NULL; if (mddev->ro == 0) { - freeze_array(conf); + freeze_array(conf, 1); fix_read_error(conf, mddev, r10_bio); unfreeze_array(conf); } else -- cgit v1.2.3 From 5026d7a9b2f3eb1f9bda66c18ac6bc3036ec9020 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 12 Jun 2013 07:37:43 -0700 Subject: md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place There are cases where the kernel will believe that the WRITE SAME command is supported by a block device which does not, in fact, support WRITE SAME. This currently happens for SATA drivers behind a SAS controller, but there are probably a hundred other ways that can happen, including drive firmware bugs. After receiving an error for WRITE SAME the block layer will retry the request as a plain write of zeroes, but mdraid will consider the failure as fatal and consider the drive failed. This has the effect that all the mirrors containing a specific set of data are each offlined in very rapid succession resulting in data loss. However, just bouncing the request back up to the block layer isn't ideal either, because the whole initial request-retry sequence should be inside the write bitmap fence, which probably means that md needs to do its own conversion of WRITE SAME to write zero. Until the failure scenario has been sorted out, disable WRITE SAME for raid1, raid5, and raid10. [neilb: added raid5] This patch is appropriate for any -stable since 3.7 when write_same support was added. Cc: stable@vger.kernel.org Signed-off-by: H. Peter Anvin Signed-off-by: NeilBrown --- drivers/md/raid1.c | 4 ++-- drivers/md/raid10.c | 3 +-- drivers/md/raid5.c | 4 +++- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 5208e9d1aff0..e02ad4450907 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2837,8 +2837,8 @@ static int run(struct mddev *mddev) return PTR_ERR(conf); if (mddev->queue) - blk_queue_max_write_same_sectors(mddev->queue, - mddev->chunk_sectors); + blk_queue_max_write_same_sectors(mddev->queue, 0); + rdev_for_each(rdev, mddev) { if (!mddev->gendisk) continue; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index aa9ed304951e..06c2cbe046e2 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3651,8 +3651,7 @@ static int run(struct mddev *mddev) if (mddev->queue) { blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors); - blk_queue_max_write_same_sectors(mddev->queue, - mddev->chunk_sectors); + blk_queue_max_write_same_sectors(mddev->queue, 0); blk_queue_io_min(mddev->queue, chunk_size); if (conf->geo.raid_disks % conf->geo.near_copies) blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4a7be455d6d8..26ee39936a28 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5465,7 +5465,7 @@ static int run(struct mddev *mddev) if (mddev->major_version == 0 && mddev->minor_version > 90) rdev->recovery_offset = reshape_offset; - + if (rdev->recovery_offset < reshape_offset) { /* We need to check old and new layout */ if (!only_parity(rdev->raid_disk, @@ -5588,6 +5588,8 @@ static int run(struct mddev *mddev) */ mddev->queue->limits.discard_zeroes_data = 0; + blk_queue_max_write_same_sectors(mddev->queue, 0); + rdev_for_each(rdev, mddev) { disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); -- cgit v1.2.3