From 0d5c8633b173dd64f0005bba83501c8462463e65 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 7 Dec 2017 13:30:09 +0000 Subject: regulator: fix incorrect indentation of two assignment statements Remove extraneous space to fix indentation on a couple of assignment statements. Signed-off-by: Colin Ian King Signed-off-by: Mark Brown --- drivers/regulator/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b64b7916507f..365b32e3f505 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2605,8 +2605,8 @@ int regulator_get_hardware_vsel_register(struct regulator *regulator, if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) return -EOPNOTSUPP; - *vsel_reg = rdev->desc->vsel_reg; - *vsel_mask = rdev->desc->vsel_mask; + *vsel_reg = rdev->desc->vsel_reg; + *vsel_mask = rdev->desc->vsel_mask; return 0; } -- cgit v1.2.3 From c360a6df02cdba47c0590ffc7d15ec6687183e8c Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 26 Jan 2018 21:08:44 +0800 Subject: regulator: make regulator voltage be an array to support more states Some regulator consumers would like to make the regulator device keeping a voltage range output when the system entering into suspend states. Making regulator voltage be an array can allow consumers to set voltage for normal state as well as for suspend states through the same code. Signed-off-by: Chunyan Zhang Signed-off-by: Mark Brown --- drivers/regulator/core.c | 63 ++++++++++++++++++++++++-------------------- drivers/regulator/internal.h | 18 +++++++++++-- 2 files changed, 51 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b64b7916507f..97bc9f7adf2f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -240,22 +240,25 @@ static int regulator_check_voltage(struct regulator_dev *rdev, * regulator consumers */ static int regulator_check_consumers(struct regulator_dev *rdev, - int *min_uV, int *max_uV) + int *min_uV, int *max_uV, + suspend_state_t state) { struct regulator *regulator; + struct regulator_voltage *voltage; list_for_each_entry(regulator, &rdev->consumer_list, list) { + voltage = ®ulator->voltage[state]; /* * Assume consumers that didn't say anything are OK * with anything in the constraint range. */ - if (!regulator->min_uV && !regulator->max_uV) + if (!voltage->min_uV && !voltage->max_uV) continue; - if (*max_uV > regulator->max_uV) - *max_uV = regulator->max_uV; - if (*min_uV < regulator->min_uV) - *min_uV = regulator->min_uV; + if (*max_uV > voltage->max_uV) + *max_uV = voltage->max_uV; + if (*min_uV < voltage->min_uV) + *min_uV = voltage->min_uV; } if (*min_uV > *max_uV) { @@ -1356,9 +1359,9 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, debugfs_create_u32("uA_load", 0444, regulator->debugfs, ®ulator->uA_load); debugfs_create_u32("min_uV", 0444, regulator->debugfs, - ®ulator->min_uV); + ®ulator->voltage[PM_SUSPEND_ON].min_uV); debugfs_create_u32("max_uV", 0444, regulator->debugfs, - ®ulator->max_uV); + ®ulator->voltage[PM_SUSPEND_ON].max_uV); debugfs_create_file("constraint_flags", 0444, regulator->debugfs, regulator, &constraint_flags_fops); @@ -2898,9 +2901,11 @@ out: } static int regulator_set_voltage_unlocked(struct regulator *regulator, - int min_uV, int max_uV) + int min_uV, int max_uV, + suspend_state_t state) { struct regulator_dev *rdev = regulator->rdev; + struct regulator_voltage *voltage = ®ulator->voltage[state]; int ret = 0; int old_min_uV, old_max_uV; int current_uV; @@ -2911,7 +2916,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, * should be a noop (some cpufreq implementations use the same * voltage for multiple frequencies, for example). */ - if (regulator->min_uV == min_uV && regulator->max_uV == max_uV) + if (voltage->min_uV == min_uV && voltage->max_uV == max_uV) goto out; /* If we're trying to set a range that overlaps the current voltage, @@ -2921,8 +2926,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { current_uV = _regulator_get_voltage(rdev); if (min_uV <= current_uV && current_uV <= max_uV) { - regulator->min_uV = min_uV; - regulator->max_uV = max_uV; + voltage->min_uV = min_uV; + voltage->max_uV = max_uV; goto out; } } @@ -2940,12 +2945,12 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, goto out; /* restore original values in case of error */ - old_min_uV = regulator->min_uV; - old_max_uV = regulator->max_uV; - regulator->min_uV = min_uV; - regulator->max_uV = max_uV; + old_min_uV = voltage->min_uV; + old_max_uV = voltage->max_uV; + voltage->min_uV = min_uV; + voltage->max_uV = max_uV; - ret = regulator_check_consumers(rdev, &min_uV, &max_uV); + ret = regulator_check_consumers(rdev, &min_uV, &max_uV, state); if (ret < 0) goto out2; @@ -2982,7 +2987,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, if (supply_change_uV > 0) { ret = regulator_set_voltage_unlocked(rdev->supply, - best_supply_uV, INT_MAX); + best_supply_uV, INT_MAX, state); if (ret) { dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n", ret); @@ -2996,7 +3001,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, if (supply_change_uV < 0) { ret = regulator_set_voltage_unlocked(rdev->supply, - best_supply_uV, INT_MAX); + best_supply_uV, INT_MAX, state); if (ret) dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n", ret); @@ -3007,8 +3012,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, out: return ret; out2: - regulator->min_uV = old_min_uV; - regulator->max_uV = old_max_uV; + voltage->min_uV = old_min_uV; + voltage->max_uV = old_max_uV; return ret; } @@ -3037,7 +3042,8 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) regulator_lock_supply(regulator->rdev); - ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV); + ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV, + PM_SUSPEND_ON); regulator_unlock_supply(regulator->rdev); @@ -3138,6 +3144,7 @@ EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); int regulator_sync_voltage(struct regulator *regulator) { struct regulator_dev *rdev = regulator->rdev; + struct regulator_voltage *voltage = ®ulator->voltage[PM_SUSPEND_ON]; int ret, min_uV, max_uV; mutex_lock(&rdev->mutex); @@ -3149,20 +3156,20 @@ int regulator_sync_voltage(struct regulator *regulator) } /* This is only going to work if we've had a voltage configured. */ - if (!regulator->min_uV && !regulator->max_uV) { + if (!voltage->min_uV && !voltage->max_uV) { ret = -EINVAL; goto out; } - min_uV = regulator->min_uV; - max_uV = regulator->max_uV; + min_uV = voltage->min_uV; + max_uV = voltage->max_uV; /* This should be a paranoia check... */ ret = regulator_check_voltage(rdev, &min_uV, &max_uV); if (ret < 0) goto out; - ret = regulator_check_consumers(rdev, &min_uV, &max_uV); + ret = regulator_check_consumers(rdev, &min_uV, &max_uV, 0); if (ret < 0) goto out; @@ -4424,8 +4431,8 @@ static void regulator_summary_show_subtree(struct seq_file *s, switch (rdev->desc->type) { case REGULATOR_VOLTAGE: seq_printf(s, "%37dmV %5dmV", - consumer->min_uV / 1000, - consumer->max_uV / 1000); + consumer->voltage[PM_SUSPEND_ON].min_uV / 1000, + consumer->voltage[PM_SUSPEND_ON].max_uV / 1000); break; case REGULATOR_CURRENT: break; diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h index 66a8ea0c8386..aba8e4149838 100644 --- a/drivers/regulator/internal.h +++ b/drivers/regulator/internal.h @@ -16,10 +16,25 @@ #ifndef __REGULATOR_INTERNAL_H #define __REGULATOR_INTERNAL_H +#include + +#define REGULATOR_STATES_NUM (PM_SUSPEND_MAX + 1) + +struct regulator_voltage { + int min_uV; + int max_uV; +}; + /* * struct regulator * * One for each consumer device. + * @voltage - a voltage array for each state of runtime, i.e.: + * PM_SUSPEND_ON + * PM_SUSPEND_TO_IDLE + * PM_SUSPEND_STANDBY + * PM_SUSPEND_MEM + * PM_SUSPEND_MAX */ struct regulator { struct device *dev; @@ -27,8 +42,7 @@ struct regulator { unsigned int always_on:1; unsigned int bypass:1; int uA_load; - int min_uV; - int max_uV; + struct regulator_voltage voltage[REGULATOR_STATES_NUM]; const char *supply_name; struct device_attribute dev_attr; struct regulator_dev *rdev; -- cgit v1.2.3 From 72069f9957a11896e79e95c8b55ec815e97c2187 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 26 Jan 2018 21:08:45 +0800 Subject: regulator: leave one item to record whether regulator is enabled The items "disabled" and "enabled" are a little redundant, since only one of them would be set to record if the regulator device should keep on or be switched to off in suspend states. So in this patch, the "disabled" was removed, only leave the "enabled": - enabled == 1 for regulator-on-in-suspend - enabled == 0 for regulator-off-in-suspend - enabled == -1 means do nothing when entering suspend mode. Signed-off-by: Chunyan Zhang Signed-off-by: Mark Brown --- drivers/regulator/core.c | 14 ++++++-------- drivers/regulator/of_regulator.c | 6 ++++-- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 97bc9f7adf2f..5ea80e94eb69 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -742,21 +742,19 @@ static int suspend_set_state(struct regulator_dev *rdev, * only warn if the driver implements set_suspend_voltage or * set_suspend_mode callback. */ - if (!rstate->enabled && !rstate->disabled) { + if (rstate->enabled != ENABLE_IN_SUSPEND && + rstate->enabled != DISABLE_IN_SUSPEND) { if (rdev->desc->ops->set_suspend_voltage || rdev->desc->ops->set_suspend_mode) rdev_warn(rdev, "No configuration\n"); return 0; } - if (rstate->enabled && rstate->disabled) { - rdev_err(rdev, "invalid configuration\n"); - return -EINVAL; - } - - if (rstate->enabled && rdev->desc->ops->set_suspend_enable) + if (rstate->enabled == ENABLE_IN_SUSPEND && + rdev->desc->ops->set_suspend_enable) ret = rdev->desc->ops->set_suspend_enable(rdev); - else if (rstate->disabled && rdev->desc->ops->set_suspend_disable) + else if (rstate->enabled == DISABLE_IN_SUSPEND && + rdev->desc->ops->set_suspend_disable) ret = rdev->desc->ops->set_suspend_disable(rdev); else /* OK if set_suspend_enable or set_suspend_disable is NULL */ ret = 0; diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 14637a01ba2d..41dad42b18f0 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -177,10 +177,12 @@ static void of_get_regulation_constraints(struct device_node *np, if (of_property_read_bool(suspend_np, "regulator-on-in-suspend")) - suspend_state->enabled = true; + suspend_state->enabled = ENABLE_IN_SUSPEND; else if (of_property_read_bool(suspend_np, "regulator-off-in-suspend")) - suspend_state->disabled = true; + suspend_state->enabled = DISABLE_IN_SUSPEND; + else + suspend_state->enabled = DO_NOTHING_IN_SUSPEND; if (!of_property_read_u32(suspend_np, "regulator-suspend-microvolt", &pval)) -- cgit v1.2.3 From aa27bbc6c6c60227c096d515f55ffe6cdfef7d2b Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 26 Jan 2018 21:08:46 +0800 Subject: regulator: empty the old suspend functions Regualtor suspend/resume functions should only be called by PM suspend core via registering dev_pm_ops, and regulator devices should implement the callback functions. Thus, any regulator consumer shouldn't call the regulator suspend/resume functions directly. In order to avoid compile errors, two empty functions with the same name still be left for the time being. Signed-off-by: Chunyan Zhang Signed-off-by: Mark Brown --- drivers/regulator/core.c | 74 ------------------------------------------------ 1 file changed, 74 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5ea80e94eb69..080c2334edc5 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -4179,80 +4179,6 @@ void regulator_unregister(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(regulator_unregister); -static int _regulator_suspend_prepare(struct device *dev, void *data) -{ - struct regulator_dev *rdev = dev_to_rdev(dev); - const suspend_state_t *state = data; - int ret; - - mutex_lock(&rdev->mutex); - ret = suspend_prepare(rdev, *state); - mutex_unlock(&rdev->mutex); - - return ret; -} - -/** - * regulator_suspend_prepare - prepare regulators for system wide suspend - * @state: system suspend state - * - * Configure each regulator with it's suspend operating parameters for state. - * This will usually be called by machine suspend code prior to supending. - */ -int regulator_suspend_prepare(suspend_state_t state) -{ - /* ON is handled by regulator active state */ - if (state == PM_SUSPEND_ON) - return -EINVAL; - - return class_for_each_device(®ulator_class, NULL, &state, - _regulator_suspend_prepare); -} -EXPORT_SYMBOL_GPL(regulator_suspend_prepare); - -static int _regulator_suspend_finish(struct device *dev, void *data) -{ - struct regulator_dev *rdev = dev_to_rdev(dev); - int ret; - - mutex_lock(&rdev->mutex); - if (rdev->use_count > 0 || rdev->constraints->always_on) { - if (!_regulator_is_enabled(rdev)) { - ret = _regulator_do_enable(rdev); - if (ret) - dev_err(dev, - "Failed to resume regulator %d\n", - ret); - } - } else { - if (!have_full_constraints()) - goto unlock; - if (!_regulator_is_enabled(rdev)) - goto unlock; - - ret = _regulator_do_disable(rdev); - if (ret) - dev_err(dev, "Failed to suspend regulator %d\n", ret); - } -unlock: - mutex_unlock(&rdev->mutex); - - /* Keep processing regulators in spite of any errors */ - return 0; -} - -/** - * regulator_suspend_finish - resume regulators from system wide suspend - * - * Turn on regulators that might be turned off by regulator_suspend_prepare - * and that should be turned on according to the regulators properties. - */ -int regulator_suspend_finish(void) -{ - return class_for_each_device(®ulator_class, NULL, NULL, - _regulator_suspend_finish); -} -EXPORT_SYMBOL_GPL(regulator_suspend_finish); /** * regulator_has_full_constraints - the system has fully specified constraints -- cgit v1.2.3 From f7efad10b5c492892b1e5decf5d3ebb29fa5c9af Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 26 Jan 2018 21:08:47 +0800 Subject: regulator: add PM suspend and resume hooks In this patch, consumers are allowed to set suspend voltage, and this actually just set the "uV" in constraint::regulator_state, when the regulator_suspend_late() was called by PM core through callback when the system is entering into suspend, the regulator device would act suspend activity then. And it assumes that if any consumer set suspend voltage, the regulator device should be enabled in the suspend state. And if the suspend voltage of a regulator device for all consumers was set zero, the regulator device would be off in the suspend state. This patch also provides a new function hook to regulator devices for resuming from suspend states. Signed-off-by: Chunyan Zhang Signed-off-by: Mark Brown --- drivers/regulator/core.c | 255 ++++++++++++++++++++++++++++++++++----- drivers/regulator/of_regulator.c | 14 +++ 2 files changed, 239 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 080c2334edc5..949e317e4d6e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -236,6 +236,12 @@ static int regulator_check_voltage(struct regulator_dev *rdev, return 0; } +/* return 0 if the state is valid */ +static int regulator_check_states(suspend_state_t state) +{ + return (state > PM_SUSPEND_MAX || state == PM_SUSPEND_TO_IDLE); +} + /* Make sure we select a voltage that suits the needs of all * regulator consumers */ @@ -327,6 +333,24 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, return -EINVAL; } +static inline struct regulator_state * +regulator_get_suspend_state(struct regulator_dev *rdev, suspend_state_t state) +{ + if (rdev->constraints == NULL) + return NULL; + + switch (state) { + case PM_SUSPEND_STANDBY: + return &rdev->constraints->state_standby; + case PM_SUSPEND_MEM: + return &rdev->constraints->state_mem; + case PM_SUSPEND_MAX: + return &rdev->constraints->state_disk; + default: + return NULL; + } +} + static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -734,9 +758,14 @@ static int drms_uA_update(struct regulator_dev *rdev) } static int suspend_set_state(struct regulator_dev *rdev, - struct regulator_state *rstate) + suspend_state_t state) { int ret = 0; + struct regulator_state *rstate; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return -EINVAL; /* If we have no suspend mode configration don't set anything; * only warn if the driver implements set_suspend_voltage or @@ -779,28 +808,8 @@ static int suspend_set_state(struct regulator_dev *rdev, return ret; } } - return ret; -} -/* locks held by caller */ -static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state) -{ - if (!rdev->constraints) - return -EINVAL; - - switch (state) { - case PM_SUSPEND_STANDBY: - return suspend_set_state(rdev, - &rdev->constraints->state_standby); - case PM_SUSPEND_MEM: - return suspend_set_state(rdev, - &rdev->constraints->state_mem); - case PM_SUSPEND_MAX: - return suspend_set_state(rdev, - &rdev->constraints->state_disk); - default: - return -EINVAL; - } + return ret; } static void print_constraints(struct regulator_dev *rdev) @@ -1069,7 +1078,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* do we need to setup our suspend state */ if (rdev->constraints->initial_state) { - ret = suspend_prepare(rdev, rdev->constraints->initial_state); + ret = suspend_set_state(rdev, rdev->constraints->initial_state); if (ret < 0) { rdev_err(rdev, "failed to set suspend state\n"); return ret; @@ -2898,6 +2907,32 @@ out: return ret; } +static int _regulator_do_set_suspend_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, suspend_state_t state) +{ + struct regulator_state *rstate; + int uV, sel; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return -EINVAL; + + if (min_uV < rstate->min_uV) + min_uV = rstate->min_uV; + if (max_uV > rstate->max_uV) + max_uV = rstate->max_uV; + + sel = regulator_map_voltage(rdev, min_uV, max_uV); + if (sel < 0) + return sel; + + uV = rdev->desc->ops->list_voltage(rdev, sel); + if (uV >= min_uV && uV <= max_uV) + rstate->uV = uV; + + return 0; +} + static int regulator_set_voltage_unlocked(struct regulator *regulator, int min_uV, int max_uV, suspend_state_t state) @@ -2993,7 +3028,11 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, } } - ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); + if (state == PM_SUSPEND_ON) + ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); + else + ret = _regulator_do_set_suspend_voltage(rdev, min_uV, + max_uV, state); if (ret < 0) goto out2; @@ -3049,6 +3088,89 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) } EXPORT_SYMBOL_GPL(regulator_set_voltage); +static inline int regulator_suspend_toggle(struct regulator_dev *rdev, + suspend_state_t state, bool en) +{ + struct regulator_state *rstate; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return -EINVAL; + + if (!rstate->changeable) + return -EPERM; + + rstate->enabled = en; + + return 0; +} + +int regulator_suspend_enable(struct regulator_dev *rdev, + suspend_state_t state) +{ + return regulator_suspend_toggle(rdev, state, true); +} +EXPORT_SYMBOL_GPL(regulator_suspend_enable); + +int regulator_suspend_disable(struct regulator_dev *rdev, + suspend_state_t state) +{ + struct regulator *regulator; + struct regulator_voltage *voltage; + + /* + * if any consumer wants this regulator device keeping on in + * suspend states, don't set it as disabled. + */ + list_for_each_entry(regulator, &rdev->consumer_list, list) { + voltage = ®ulator->voltage[state]; + if (voltage->min_uV || voltage->max_uV) + return 0; + } + + return regulator_suspend_toggle(rdev, state, false); +} +EXPORT_SYMBOL_GPL(regulator_suspend_disable); + +static int _regulator_set_suspend_voltage(struct regulator *regulator, + int min_uV, int max_uV, + suspend_state_t state) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_state *rstate; + + rstate = regulator_get_suspend_state(rdev, state); + if (rstate == NULL) + return -EINVAL; + + if (rstate->min_uV == rstate->max_uV) { + rdev_err(rdev, "The suspend voltage can't be changed!\n"); + return -EPERM; + } + + return regulator_set_voltage_unlocked(regulator, min_uV, max_uV, state); +} + +int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, + int max_uV, suspend_state_t state) +{ + int ret = 0; + + /* PM_SUSPEND_ON is handled by regulator_set_voltage() */ + if (regulator_check_states(state) || state == PM_SUSPEND_ON) + return -EINVAL; + + regulator_lock_supply(regulator->rdev); + + ret = _regulator_set_suspend_voltage(regulator, min_uV, + max_uV, state); + + regulator_unlock_supply(regulator->rdev); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_suspend_voltage); + /** * regulator_set_voltage_time - get raise/fall time * @regulator: regulator source @@ -3923,12 +4045,6 @@ static void regulator_dev_release(struct device *dev) kfree(rdev); } -static struct class regulator_class = { - .name = "regulator", - .dev_release = regulator_dev_release, - .dev_groups = regulator_dev_groups, -}; - static void rdev_init_debugfs(struct regulator_dev *rdev) { struct device *parent = rdev->dev.parent; @@ -4179,7 +4295,86 @@ void regulator_unregister(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(regulator_unregister); +#ifdef CONFIG_SUSPEND +static int _regulator_suspend_late(struct device *dev, void *data) +{ + struct regulator_dev *rdev = dev_to_rdev(dev); + suspend_state_t *state = data; + int ret; + + mutex_lock(&rdev->mutex); + ret = suspend_set_state(rdev, *state); + mutex_unlock(&rdev->mutex); + + return ret; +} +/** + * regulator_suspend_late - prepare regulators for system wide suspend + * @state: system suspend state + * + * Configure each regulator with it's suspend operating parameters for state. + */ +static int regulator_suspend_late(struct device *dev) +{ + suspend_state_t state = pm_suspend_target_state; + + return class_for_each_device(®ulator_class, NULL, &state, + _regulator_suspend_late); +} +static int _regulator_resume_early(struct device *dev, void *data) +{ + int ret = 0; + struct regulator_dev *rdev = dev_to_rdev(dev); + suspend_state_t *state = data; + struct regulator_state *rstate; + + rstate = regulator_get_suspend_state(rdev, *state); + if (rstate == NULL) + return -EINVAL; + + mutex_lock(&rdev->mutex); + + if (rdev->desc->ops->resume_early && + (rstate->enabled == ENABLE_IN_SUSPEND || + rstate->enabled == DISABLE_IN_SUSPEND)) + ret = rdev->desc->ops->resume_early(rdev); + + mutex_unlock(&rdev->mutex); + + return ret; +} + +static int regulator_resume_early(struct device *dev) +{ + suspend_state_t state = pm_suspend_target_state; + + return class_for_each_device(®ulator_class, NULL, &state, + _regulator_resume_early); +} + +#else /* !CONFIG_SUSPEND */ + +#define regulator_suspend_late NULL +#define regulator_resume_early NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_PM +static const struct dev_pm_ops __maybe_unused regulator_pm_ops = { + .suspend_late = regulator_suspend_late, + .resume_early = regulator_resume_early, +}; +#endif + +static struct class regulator_class = { + .name = "regulator", + .dev_release = regulator_dev_release, + .dev_groups = regulator_dev_groups, +#ifdef CONFIG_PM + .pm = ®ulator_pm_ops, +#endif +}; /** * regulator_has_full_constraints - the system has fully specified constraints * diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 41dad42b18f0..a09ef6cc2e9c 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -184,9 +184,23 @@ static void of_get_regulation_constraints(struct device_node *np, else suspend_state->enabled = DO_NOTHING_IN_SUSPEND; + if (!of_property_read_u32(np, "regulator-suspend-min-microvolt", + &pval)) + suspend_state->min_uV = pval; + + if (!of_property_read_u32(np, "regulator-suspend-max-microvolt", + &pval)) + suspend_state->max_uV = pval; + if (!of_property_read_u32(suspend_np, "regulator-suspend-microvolt", &pval)) suspend_state->uV = pval; + else /* otherwise use min_uV as default suspend voltage */ + suspend_state->uV = suspend_state->min_uV; + + if (of_property_read_bool(suspend_np, + "regulator-changeable-in-suspend")) + suspend_state->changeable = true; if (i == PM_SUSPEND_MEM) constraints->initial_state = PM_SUSPEND_MEM; -- cgit v1.2.3 From 148096af0bf381c78afe253c07ef1c77778f0e68 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Mon, 22 Jan 2018 15:30:06 +0100 Subject: regulator: core: Move of_find_regulator_by_node() to of_regulator.c As of_find_regulator_by_node() is an of function it should be moved from core.c to of_regulator.c. It provides better separation of device tree functions from the core and allows other of_functions in of_regulator.c to resolve device_node to regulator_dev. This will be useful for implementation of parsing coupled regulators properties. Declare of_find_regulator_by_node() function in internal.h as well as regulator_class and dev_to_rdev(), as they are needed by of_find_regulator_by_node(). Signed-off-by: Maciej Purski Signed-off-by: Mark Brown --- drivers/regulator/core.c | 23 +---------------------- drivers/regulator/internal.h | 9 +++++++++ drivers/regulator/of_regulator.c | 14 ++++++++++++++ 3 files changed, 24 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 365b32e3f505..5f7678292cef 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -58,8 +58,6 @@ static bool has_full_constraints; static struct dentry *debugfs_root; -static struct class regulator_class; - /* * struct regulator_map * @@ -112,11 +110,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, const char *supply_name); static void _regulator_put(struct regulator *regulator); -static struct regulator_dev *dev_to_rdev(struct device *dev) -{ - return container_of(dev, struct regulator_dev, dev); -} - static const char *rdev_get_name(struct regulator_dev *rdev) { if (rdev->constraints && rdev->constraints->name) @@ -1417,20 +1410,6 @@ static void regulator_supply_alias(struct device **dev, const char **supply) } } -static int of_node_match(struct device *dev, const void *data) -{ - return dev->of_node == data; -} - -static struct regulator_dev *of_find_regulator_by_node(struct device_node *np) -{ - struct device *dev; - - dev = class_find_device(®ulator_class, NULL, np, of_node_match); - - return dev ? dev_to_rdev(dev) : NULL; -} - static int regulator_match(struct device *dev, const void *data) { struct regulator_dev *r = dev_to_rdev(dev); @@ -3918,7 +3897,7 @@ static void regulator_dev_release(struct device *dev) kfree(rdev); } -static struct class regulator_class = { +struct class regulator_class = { .name = "regulator", .dev_release = regulator_dev_release, .dev_groups = regulator_dev_groups, diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h index 66a8ea0c8386..2f3218be5b8d 100644 --- a/drivers/regulator/internal.h +++ b/drivers/regulator/internal.h @@ -35,6 +35,15 @@ struct regulator { struct dentry *debugfs; }; +extern struct class regulator_class; + +static inline struct regulator_dev *dev_to_rdev(struct device *dev) +{ + return container_of(dev, struct regulator_dev, dev); +} + +struct regulator_dev *of_find_regulator_by_node(struct device_node *np); + #ifdef CONFIG_OF struct regulator_init_data *regulator_of_get_init_data(struct device *dev, const struct regulator_desc *desc, diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 14637a01ba2d..54e810ae93d6 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -376,3 +376,17 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev, return init_data; } + +static int of_node_match(struct device *dev, const void *data) +{ + return dev->of_node == data; +} + +struct regulator_dev *of_find_regulator_by_node(struct device_node *np) +{ + struct device *dev; + + dev = class_find_device(®ulator_class, NULL, np, of_node_match); + + return dev ? dev_to_rdev(dev) : NULL; +} -- cgit v1.2.3 From 3d67fe950707a930664c5673ecc026f1bb497136 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Mon, 22 Jan 2018 15:30:07 +0100 Subject: regulator: core: Refactor regulator_list_voltage() Change _regulator_list_voltage() argument from regulator to regulator_dev in order to provide better separation of core layers. Allow calling _regulator_list_voltage() from functions, with regulator_dev argument. This refactoring is needed in order to implement setting voltage of coupled regulators. Signed-off-by: Maciej Purski Signed-off-by: Mark Brown --- drivers/regulator/core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5f7678292cef..fd8eacfea422 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2447,10 +2447,9 @@ static int _regulator_is_enabled(struct regulator_dev *rdev) return rdev->desc->ops->is_enabled(rdev); } -static int _regulator_list_voltage(struct regulator *regulator, - unsigned selector, int lock) +static int _regulator_list_voltage(struct regulator_dev *rdev, + unsigned selector, int lock) { - struct regulator_dev *rdev = regulator->rdev; const struct regulator_ops *ops = rdev->desc->ops; int ret; @@ -2466,7 +2465,8 @@ static int _regulator_list_voltage(struct regulator *regulator, if (lock) mutex_unlock(&rdev->mutex); } else if (rdev->is_switch && rdev->supply) { - ret = _regulator_list_voltage(rdev->supply, selector, lock); + ret = _regulator_list_voltage(rdev->supply->rdev, + selector, lock); } else { return -EINVAL; } @@ -2542,7 +2542,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages); */ int regulator_list_voltage(struct regulator *regulator, unsigned selector) { - return _regulator_list_voltage(regulator, selector, 1); + return _regulator_list_voltage(regulator->rdev, selector, 1); } EXPORT_SYMBOL_GPL(regulator_list_voltage); -- cgit v1.2.3 From 00cb9f4f5ef5e98653d4726836a4482180bd2efd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 26 Jan 2018 17:55:30 +0000 Subject: regulator: Fix build error 3d67fe950707 (regulator: core: Refactor regulator_list_voltage()) missed one user of regulator_list_voltage(), update for that. Signed-off-by: Mark Brown --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 2dccc4b3766e..42681c10cbe4 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2980,7 +2980,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, goto out2; } - best_supply_uV = _regulator_list_voltage(regulator, selector, 0); + best_supply_uV = _regulator_list_voltage(rdev, selector, 0); if (best_supply_uV < 0) { ret = best_supply_uV; goto out2; -- cgit v1.2.3