From 702d211c45d95e6788cec42f7f3c4a538e8853ef Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Fri, 27 Feb 2015 09:58:29 +0100 Subject: at86rf230: add irq low-level for polarity The at86rf2xx chips supports the setting of irq polarity if active low or active high. This patch adds a handling for IRQ_ACTIVE_LOW if the irq_type is IRQ_TYPE_LEVEL_LOW. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index e6dec0ac163a..c7a30ce71dcf 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1321,7 +1321,8 @@ static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim) return rc; irq_type = irq_get_trigger_type(lp->spi->irq); - if (irq_type == IRQ_TYPE_EDGE_FALLING) + if (irq_type == IRQ_TYPE_EDGE_FALLING || + irq_type == IRQ_TYPE_LEVEL_LOW) irq_pol = IRQ_ACTIVE_LOW; rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol); -- cgit v1.2.3