From 60039a5295b3d82a48fe132c699987d2e1408675 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 28 Sep 2010 13:19:38 +0100 Subject: ata: Intel IDE-R support Intel IDE-R devices are part of the Intel AMT management setup. They don't have any special configuration registers or settings so the ata_generic driver will support them fully. Rather than add a huge table of IDs for each chipset and keep sending in new ones this patch autodetects them. Signed-off-by: Alan Cox Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_generic.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index cc5f7726bde7..6981f7680a00 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -35,6 +35,7 @@ enum { ATA_GEN_CLASS_MATCH = (1 << 0), ATA_GEN_FORCE_DMA = (1 << 1), + ATA_GEN_INTEL_IDER = (1 << 2), }; /** @@ -108,6 +109,49 @@ static struct ata_port_operations generic_port_ops = { static int all_generic_ide; /* Set to claim all devices */ +/** + * is_intel_ider - identify intel IDE-R devices + * @dev: PCI device + * + * Distinguish Intel IDE-R controller devices from other Intel IDE + * devices. IDE-R devices have no timing registers and are in + * most respects virtual. They should be driven by the ata_generic + * driver. + * + * IDE-R devices have PCI offset 0xF8.L as zero, later Intel ATA has + * it non zero. All Intel ATA has 0x40 writable (timing), but it is + * not writable on IDE-R devices (this is guaranteed). + */ + +static int is_intel_ider(struct pci_dev *dev) +{ + /* For Intel IDE the value at 0xF8 is only zero on IDE-R + interfaces */ + u32 r; + u16 t; + + /* Check the manufacturing ID, it will be zero for IDE-R */ + pci_read_config_dword(dev, 0xF8, &r); + /* Not IDE-R: punt so that ata_(old)piix gets it */ + if (r != 0) + return 0; + /* 0xF8 will also be zero on some early Intel IDE devices + but they will have a sane timing register */ + pci_read_config_word(dev, 0x40, &t); + if (t != 0) + return 0; + /* Finally check if the timing register is writable so that + we eliminate any early devices hot-docked in a docking + station */ + pci_write_config_word(dev, 0x40, 1); + pci_read_config_word(dev, 0x40, &t); + if (t) { + pci_write_config_word(dev, 0x40, 0); + return 0; + } + return 1; +} + /** * ata_generic_init - attach generic IDE * @dev: PCI device found @@ -134,6 +178,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0) return -ENODEV; + if (id->driver_data & ATA_GEN_INTEL_IDER) + if (!is_intel_ider(dev)) + return -ENODEV; + /* Devices that need care */ if (dev->vendor == PCI_VENDOR_ID_UMC && dev->device == PCI_DEVICE_ID_UMC_UM8886A && @@ -186,7 +234,11 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, -#endif +#endif + /* Intel, IDE class device */ + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, + .driver_data = ATA_GEN_INTEL_IDER }, /* Must come last. If you add entries adjust this table appropriately */ { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL), .driver_data = ATA_GEN_CLASS_MATCH }, -- cgit v1.2.3