From e0f06bba9629987fb3ec1d6928bf17ef689702e8 Mon Sep 17 00:00:00 2001 From: Mark D Rustad Date: Wed, 31 Aug 2016 10:34:28 -0700 Subject: ixgbe: Return error when getting PHY address if PHY access is not supported In cases where PHY register access is not supported, don't mislead a caller into thinking that it is supported by returning a PHY address. Instead, return -EOPNOTSUPP when PHY access is not supported. Signed-off-by: Mark Rustad Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index d962368d08d0..822cdb4f2c25 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -8529,6 +8529,10 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) return ixgbe_ptp_set_ts_config(adapter, req); case SIOCGHWTSTAMP: return ixgbe_ptp_get_ts_config(adapter, req); + case SIOCGMIIPHY: + if (!adapter->hw.phy.ops.read_reg) + return -EOPNOTSUPP; + /* fall through */ default: return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); } -- cgit v1.2.3 From a39221ce969b316d3c3dcf7fcff8c0d8cf223007 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Mon, 3 Jul 2017 13:02:55 +0200 Subject: ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register and then try to mask some bits out of the value, using the logical instead of bitwise and operator. Fixes: a21d0822ff69 ("ixgbe: add support for geneve Rx offload") Signed-off-by: Sabrina Dubroca Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 822cdb4f2c25..4d76afd13868 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4881,7 +4881,7 @@ static void ixgbe_clear_udp_tunnel_port(struct ixgbe_adapter *adapter, u32 mask) IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE))) return; - vxlanctrl = IXGBE_READ_REG(hw, IXGBE_VXLANCTRL) && ~mask; + vxlanctrl = IXGBE_READ_REG(hw, IXGBE_VXLANCTRL) & ~mask; IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, vxlanctrl); if (mask & IXGBE_VXLANCTRL_VXLAN_UDPPORT_MASK) -- cgit v1.2.3 From f4986d250ada29ae0c65c209a9d8f97968ea7eae Mon Sep 17 00:00:00 2001 From: Ding Tianhong Date: Fri, 18 Aug 2017 14:21:04 +0800 Subject: Revert commit 1a8b6d76dc5b ("net:add one common config...") The new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to indicate that Relaxed Ordering Attributes (RO) should not be used for Transaction Layer Packets (TLP) targeted toward these affected Root Port, it will clear the bit4 in the PCIe Device Control register, so the PCIe device drivers could query PCIe configuration space to determine if it can send TLPs to Root Port with the Relaxed Ordering Attributes set. With this new flag we don't need the config ARCH_WANT_RELAX_ORDER to control the Relaxed Ordering Attributes for the ixgbe drivers just like the commit 1a8b6d76dc5b ("net:add one common config...") did, so revert this commit. Signed-off-by: Ding Tianhong Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 2c19070d2a0b..e8c1788aed1f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -366,7 +366,7 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) } IXGBE_WRITE_FLUSH(hw); -#ifndef CONFIG_ARCH_WANT_RELAX_ORDER +#ifndef CONFIG_SPARC /* Disable relaxed ordering */ for (i = 0; i < hw->mac.max_tx_queues; i++) { u32 regval; -- cgit v1.2.3 From 5e0fac63a694918870af9d6eaf716af19e7f5652 Mon Sep 17 00:00:00 2001 From: Ding Tianhong Date: Fri, 18 Aug 2017 14:21:05 +0800 Subject: net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag The ixgbe driver use the compile check to determine if it can send TLPs to Root Port with the Relaxed Ordering Attribute set, this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to the kernel and we could check the bit4 in the PCIe Device Control register to determine whether we should use the Relaxed Ordering Attributes or not, so use this new way in the ixgbe driver. Signed-off-by: Ding Tianhong Acked-by: Emil Tantilov Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 22 ---------------------- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 19 ------------------- 2 files changed, 41 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 523f9d05a810..8a32eb7d47b9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -175,31 +175,9 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) **/ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) { -#ifndef CONFIG_SPARC - u32 regval; - u32 i; -#endif s32 ret_val; ret_val = ixgbe_start_hw_generic(hw); - -#ifndef CONFIG_SPARC - /* Disable relaxed ordering */ - for (i = 0; ((i < hw->mac.max_tx_queues) && - (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); - regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); - } - - for (i = 0; ((i < hw->mac.max_rx_queues) && - (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); - regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | - IXGBE_DCA_RXCTRL_HEAD_WRO_EN); - IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); - } -#endif if (ret_val) return ret_val; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index e8c1788aed1f..6e6ab6f6875e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -366,25 +366,6 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) } IXGBE_WRITE_FLUSH(hw); -#ifndef CONFIG_SPARC - /* Disable relaxed ordering */ - for (i = 0; i < hw->mac.max_tx_queues; i++) { - u32 regval; - - regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); - regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); - } - - for (i = 0; i < hw->mac.max_rx_queues; i++) { - u32 regval; - - regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); - regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | - IXGBE_DCA_RXCTRL_HEAD_WRO_EN); - IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); - } -#endif return 0; } -- cgit v1.2.3 From 8e679021c5b9465ac5b0d7efd26baab9b10a2dbd Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 7 Sep 2017 10:32:48 -0700 Subject: ixgbe: incorrect XDP ring accounting in ethtool tx_frame param Changing the TX ring parameters with an XDP program attached may cause the XDP queues to be cleared and the TX rings to be incorrectly configured. Fix by doing correct ring accounting in setup call. Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: John Fastabend Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 72c565712a5f..c3e7a8191128 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1048,7 +1048,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_ring *temp_ring; - int i, err = 0; + int i, j, err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -1085,8 +1085,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev, } /* allocate temporary buffer to store rings in */ - i = max_t(int, adapter->num_tx_queues, adapter->num_rx_queues); - i = max_t(int, i, adapter->num_xdp_queues); + i = max_t(int, adapter->num_tx_queues + adapter->num_xdp_queues, + adapter->num_rx_queues); temp_ring = vmalloc(i * sizeof(struct ixgbe_ring)); if (!temp_ring) { @@ -1118,8 +1118,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev, } } - for (i = 0; i < adapter->num_xdp_queues; i++) { - memcpy(&temp_ring[i], adapter->xdp_ring[i], + for (j = 0; j < adapter->num_xdp_queues; j++, i++) { + memcpy(&temp_ring[i], adapter->xdp_ring[j], sizeof(struct ixgbe_ring)); temp_ring[i].count = new_tx_count; @@ -1139,10 +1139,10 @@ static int ixgbe_set_ringparam(struct net_device *netdev, memcpy(adapter->tx_ring[i], &temp_ring[i], sizeof(struct ixgbe_ring)); } - for (i = 0; i < adapter->num_xdp_queues; i++) { - ixgbe_free_tx_resources(adapter->xdp_ring[i]); + for (j = 0; j < adapter->num_xdp_queues; j++, i++) { + ixgbe_free_tx_resources(adapter->xdp_ring[j]); - memcpy(adapter->xdp_ring[i], &temp_ring[i], + memcpy(adapter->xdp_ring[j], &temp_ring[i], sizeof(struct ixgbe_ring)); } -- cgit v1.2.3