From 4042a1475ef5cb290f5fedd5ef8de3e1114c55cd Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 8 Jun 2015 16:16:15 +0200 Subject: rtc: mv: correct 24 hour error message The driver can't accommodate the 12 hour mode but the error message states that the 24 hour mode is not supported. Also fix the typos (hour vs hours). Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-mv.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c index 7e84bb4072ad..7f50d2ef7f6e 100644 --- a/drivers/rtc/rtc-mv.c +++ b/drivers/rtc/rtc-mv.c @@ -78,7 +78,7 @@ static int mv_rtc_read_time(struct device *dev, struct rtc_time *tm) second = rtc_time & 0x7f; minute = (rtc_time >> RTC_MINUTES_OFFS) & 0x7f; - hour = (rtc_time >> RTC_HOURS_OFFS) & 0x3f; /* assume 24 hours mode */ + hour = (rtc_time >> RTC_HOURS_OFFS) & 0x3f; /* assume 24 hour mode */ wday = (rtc_time >> RTC_WDAY_OFFS) & 0x7; day = rtc_date & 0x3f; @@ -109,7 +109,7 @@ static int mv_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) second = rtc_time & 0x7f; minute = (rtc_time >> RTC_MINUTES_OFFS) & 0x7f; - hour = (rtc_time >> RTC_HOURS_OFFS) & 0x3f; /* assume 24 hours mode */ + hour = (rtc_time >> RTC_HOURS_OFFS) & 0x3f; /* assume 24 hour mode */ wday = (rtc_time >> RTC_WDAY_OFFS) & 0x7; day = rtc_date & 0x3f; @@ -240,10 +240,10 @@ static int __init mv_rtc_probe(struct platform_device *pdev) if (!IS_ERR(pdata->clk)) clk_prepare_enable(pdata->clk); - /* make sure the 24 hours mode is enabled */ + /* make sure the 24 hour mode is enabled */ rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS); if (rtc_time & RTC_HOURS_12H_MODE) { - dev_err(&pdev->dev, "24 Hours mode not supported.\n"); + dev_err(&pdev->dev, "12 Hour mode is enabled but not supported.\n"); ret = -EINVAL; goto out; } -- cgit v1.2.3