From db5d0b597bc27bbddf40f2f8359a73be4eb77104 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Fri, 10 Feb 2017 13:45:05 -0500 Subject: ibmvnic: Initialize completion variables before starting work Initialize condition variables prior to invoking any work that can mark them complete. This resolves a race in the ibmvnic driver where the driver faults trying to complete an uninitialized condition variable. Signed-off-by: Nathan Fontenot Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index c12596676bbb..c7150343342d 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -189,9 +189,10 @@ static int alloc_long_term_buff(struct ibmvnic_adapter *adapter, } ltb->map_id = adapter->map_id; adapter->map_id++; + + init_completion(&adapter->fw_done); send_request_map(adapter, ltb->addr, ltb->size, ltb->map_id); - init_completion(&adapter->fw_done); wait_for_completion(&adapter->fw_done); return 0; } @@ -1121,10 +1122,10 @@ static void ibmvnic_get_ethtool_stats(struct net_device *dev, crq.request_statistics.ioba = cpu_to_be32(adapter->stats_token); crq.request_statistics.len = cpu_to_be32(sizeof(struct ibmvnic_statistics)); - ibmvnic_send_crq(adapter, &crq); /* Wait for data to be written */ init_completion(&adapter->stats_done); + ibmvnic_send_crq(adapter, &crq); wait_for_completion(&adapter->stats_done); for (i = 0; i < ARRAY_SIZE(ibmvnic_stats); i++) @@ -2799,9 +2800,9 @@ static ssize_t trace_read(struct file *file, char __user *user_buf, size_t len, crq.collect_fw_trace.correlator = adapter->ras_comps[num].correlator; crq.collect_fw_trace.ioba = cpu_to_be32(trace_tok); crq.collect_fw_trace.len = adapter->ras_comps[num].trace_buff_size; - ibmvnic_send_crq(adapter, &crq); init_completion(&adapter->fw_done); + ibmvnic_send_crq(adapter, &crq); wait_for_completion(&adapter->fw_done); if (*ppos + len > be32_to_cpu(adapter->ras_comps[num].trace_buff_size)) @@ -3581,9 +3582,9 @@ static int ibmvnic_dump_show(struct seq_file *seq, void *v) memset(&crq, 0, sizeof(crq)); crq.request_dump_size.first = IBMVNIC_CRQ_CMD; crq.request_dump_size.cmd = REQUEST_DUMP_SIZE; - ibmvnic_send_crq(adapter, &crq); init_completion(&adapter->fw_done); + ibmvnic_send_crq(adapter, &crq); wait_for_completion(&adapter->fw_done); seq_write(seq, adapter->dump_data, adapter->dump_data_size); @@ -3629,8 +3630,8 @@ static void handle_crq_init_rsp(struct work_struct *work) } } - send_version_xchg(adapter); reinit_completion(&adapter->init_done); + send_version_xchg(adapter); if (!wait_for_completion_timeout(&adapter->init_done, timeout)) { dev_err(dev, "Passive init timeout\n"); goto task_failed; @@ -3640,9 +3641,9 @@ static void handle_crq_init_rsp(struct work_struct *work) if (adapter->renegotiate) { adapter->renegotiate = false; release_sub_crqs_no_irqs(adapter); - send_cap_queries(adapter); reinit_completion(&adapter->init_done); + send_cap_queries(adapter); if (!wait_for_completion_timeout(&adapter->init_done, timeout)) { dev_err(dev, "Passive init timeout\n"); @@ -3772,9 +3773,9 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) adapter->debugfs_dump = ent; } } - ibmvnic_send_crq_init(adapter); init_completion(&adapter->init_done); + ibmvnic_send_crq_init(adapter); if (!wait_for_completion_timeout(&adapter->init_done, timeout)) return 0; @@ -3782,9 +3783,9 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) if (adapter->renegotiate) { adapter->renegotiate = false; release_sub_crqs_no_irqs(adapter); - send_cap_queries(adapter); reinit_completion(&adapter->init_done); + send_cap_queries(adapter); if (!wait_for_completion_timeout(&adapter->init_done, timeout)) return 0; -- cgit v1.2.3 From e722af6391949e8851310441bb0cec157d25611d Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Fri, 10 Feb 2017 13:29:06 -0500 Subject: ibmvnic: Call napi_disable instead of napi_enable in failure path The failure path in ibmvnic_open() mistakenly makes a second call to napi_enable instead of calling napi_disable. This can result in a BUG_ON for any queues that were enabled in the previous call to napi_enable. Signed-off-by: Nathan Fontenot Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index c7150343342d..752b0822b020 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -506,7 +506,7 @@ rx_pool_alloc_failed: adapter->rx_pool = NULL; rx_pool_arr_alloc_failed: for (i = 0; i < adapter->req_rx_queues; i++) - napi_enable(&adapter->napi[i]); + napi_disable(&adapter->napi[i]); alloc_napi_failed: return -ENOMEM; } -- cgit v1.2.3 From ebf692f85ff78092cd238166d8d7ec51419f9c02 Mon Sep 17 00:00:00 2001 From: Mart van Santen Date: Fri, 10 Feb 2017 12:02:18 +0000 Subject: xen-netback: vif counters from int/long to u64 This patch fixes an issue where the type of counters in the queue(s) and interface are not in sync (queue counters are int, interface counters are long), causing incorrect reporting of tx/rx values of the vif interface and unclear counter overflows. This patch sets both counters to the u64 type. Signed-off-by: Mart van Santen Reviewed-by: Paul Durrant Signed-off-by: David S. Miller --- drivers/net/xen-netback/common.h | 8 ++++---- drivers/net/xen-netback/interface.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index 3ce1f7da8647..530586be05b4 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -113,10 +113,10 @@ struct xenvif_stats { * A subset of struct net_device_stats that contains only the * fields that are updated in netback.c for each queue. */ - unsigned int rx_bytes; - unsigned int rx_packets; - unsigned int tx_bytes; - unsigned int tx_packets; + u64 rx_bytes; + u64 rx_packets; + u64 tx_bytes; + u64 tx_packets; /* Additional stats used by xenvif */ unsigned long rx_gso_checksum_fixup; diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 579521327b03..50fa1692d985 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -221,10 +221,10 @@ static struct net_device_stats *xenvif_get_stats(struct net_device *dev) { struct xenvif *vif = netdev_priv(dev); struct xenvif_queue *queue = NULL; - unsigned long rx_bytes = 0; - unsigned long rx_packets = 0; - unsigned long tx_bytes = 0; - unsigned long tx_packets = 0; + u64 rx_bytes = 0; + u64 rx_packets = 0; + u64 tx_bytes = 0; + u64 tx_packets = 0; unsigned int index; spin_lock(&vif->lock); -- cgit v1.2.3 From fed06ee89b78d3af32e235e0e89ad0d946fcb95d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 12 Feb 2017 11:21:31 +0200 Subject: net/mlx5e: Disable preemption when doing TC statistics upcall When called by HW offloading drivers, the TC action (e.g net/sched/act_mirred.c) code uses this_cpu logic, e.g _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets) per the kernel documention, preemption should be disabled, add that. Before the fix, when running with CONFIG_PREEMPT set, we get a BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793 asserion from the TC action (mirred) stats_update callback. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index c5282b6aba8b..2ebbe80d8126 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1087,10 +1087,14 @@ int mlx5e_stats_flower(struct mlx5e_priv *priv, mlx5_fc_query_cached(counter, &bytes, &packets, &lastuse); + preempt_disable(); + tcf_exts_to_list(f->exts, &actions); list_for_each_entry(a, &actions, list) tcf_action_stats_update(a, bytes, packets, lastuse); + preempt_enable(); + return 0; } -- cgit v1.2.3 From 01f8902bcf3ff124d0aeb88a774180ebcec20ace Mon Sep 17 00:00:00 2001 From: Rui Sousa Date: Mon, 13 Feb 2017 10:01:25 +0800 Subject: net: fec: fix multicast filtering hardware setup Fix hardware setup of multicast address hash: - Never clear the hardware hash (to avoid packet loss) - Construct the hash register values in software and then write once to hardware Signed-off-by: Rui Sousa Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 38160c2bebcb..8be7034b2e7b 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2910,6 +2910,7 @@ static void set_multicast_list(struct net_device *ndev) struct netdev_hw_addr *ha; unsigned int i, bit, data, crc, tmp; unsigned char hash; + unsigned int hash_high = 0, hash_low = 0; if (ndev->flags & IFF_PROMISC) { tmp = readl(fep->hwp + FEC_R_CNTRL); @@ -2932,11 +2933,7 @@ static void set_multicast_list(struct net_device *ndev) return; } - /* Clear filter and add the addresses in hash register - */ - writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); - writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); - + /* Add the addresses in hash register */ netdev_for_each_mc_addr(ha, ndev) { /* calculate crc32 value of mac address */ crc = 0xffffffff; @@ -2954,16 +2951,14 @@ static void set_multicast_list(struct net_device *ndev) */ hash = (crc >> (32 - FEC_HASH_BITS)) & 0x3f; - if (hash > 31) { - tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH); - tmp |= 1 << (hash - 32); - writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); - } else { - tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW); - tmp |= 1 << hash; - writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW); - } + if (hash > 31) + hash_high |= 1 << (hash - 32); + else + hash_low |= 1 << hash; } + + writel(hash_high, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); + writel(hash_low, fep->hwp + FEC_GRP_HASH_TABLE_LOW); } /* Set a MAC change in hardware. */ -- cgit v1.2.3 From a60ced990e309666915d21445e95347d12406694 Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Tue, 14 Feb 2017 14:42:15 +0200 Subject: net: ethernet: ti: cpsw: fix cpsw assignment in resume There is a copy-paste error, which hides breaking of resume for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev) in suspend, but left it unchanged in resume. Fixes: 606f39939595a4d4540406bfc11f265b2036af6d (ti: cpsw: move platform data and slaves info to cpsw_common) Reported-by: Alexey Starikovskiy Signed-off-by: Ivan Khoronzhuk Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index b203143647e6..65088224c207 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -3160,7 +3160,7 @@ static int cpsw_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct net_device *ndev = platform_get_drvdata(pdev); - struct cpsw_common *cpsw = netdev_priv(ndev); + struct cpsw_common *cpsw = ndev_to_cpsw(ndev); /* Select default pin state */ pinctrl_pm_select_default_state(dev); -- cgit v1.2.3 From f39f0d1e1e93145a0e91d9a7a639c42fd037ecc3 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Tue, 14 Feb 2017 10:22:59 -0600 Subject: ibmvnic: Fix initial MTU settings In the current driver, the MTU is set to the maximum value capable for the backing device. This decision turned out to be a mistake as it led to confusion among users. The expected initial MTU value used for other IBM vNIC capable operating systems is 1500, with the maximum value (9000) reserved for when Jumbo frames are enabled. This patch sets the MTU to the default value for a net device. It also corrects a discrepancy between MTU values received from firmware, which includes the ethernet header length, and net device MTU values. Finally, it removes redundant min/max MTU assignments after device initialization. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 752b0822b020..5b66b4fd1767 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1497,7 +1497,7 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) adapter->req_rx_queues = adapter->opt_rx_comp_queues; adapter->req_rx_add_queues = adapter->max_rx_add_queues; - adapter->req_mtu = adapter->max_mtu; + adapter->req_mtu = adapter->netdev->mtu + ETH_HLEN; } total_queues = adapter->req_tx_queues + adapter->req_rx_queues; @@ -2627,12 +2627,12 @@ static void handle_query_cap_rsp(union ibmvnic_crq *crq, break; case MIN_MTU: adapter->min_mtu = be64_to_cpu(crq->query_capability.number); - netdev->min_mtu = adapter->min_mtu; + netdev->min_mtu = adapter->min_mtu - ETH_HLEN; netdev_dbg(netdev, "min_mtu = %lld\n", adapter->min_mtu); break; case MAX_MTU: adapter->max_mtu = be64_to_cpu(crq->query_capability.number); - netdev->max_mtu = adapter->max_mtu; + netdev->max_mtu = adapter->max_mtu - ETH_HLEN; netdev_dbg(netdev, "max_mtu = %lld\n", adapter->max_mtu); break; case MAX_MULTICAST_FILTERS: @@ -3657,9 +3657,7 @@ static void handle_crq_init_rsp(struct work_struct *work) goto task_failed; netdev->real_num_tx_queues = adapter->req_tx_queues; - netdev->mtu = adapter->req_mtu; - netdev->min_mtu = adapter->min_mtu; - netdev->max_mtu = adapter->max_mtu; + netdev->mtu = adapter->req_mtu - ETH_HLEN; if (adapter->failover) { adapter->failover = false; @@ -3799,7 +3797,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) } netdev->real_num_tx_queues = adapter->req_tx_queues; - netdev->mtu = adapter->req_mtu; + netdev->mtu = adapter->req_mtu - ETH_HLEN; rc = register_netdev(netdev); if (rc) { -- cgit v1.2.3 From cd224553641848dd17800fe559e4ff5d208553e8 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 14 Feb 2017 19:11:44 +0200 Subject: net: xilinx_emaclite: fix receive buffer overflow xilinx_emaclite looks at the received data to try to determine the Ethernet packet length but does not properly clamp it if proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer overflow and a panic via skb_panic() as the length exceeds the allocated skb size. Fix those cases. Also add an additional unconditional check with WARN_ON() at the end. Signed-off-by: Anssi Hannula Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 93dc10b10c09..455774e4741a 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -369,7 +369,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, * * Return: Total number of bytes received */ -static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) +static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) { void __iomem *addr; u16 length, proto_type; @@ -409,7 +409,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) /* Check if received ethernet frame is a raw ethernet frame * or an IP packet or an ARP packet */ - if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) { + if (proto_type > ETH_DATA_LEN) { if (proto_type == ETH_P_IP) { length = ((ntohl(__raw_readl(addr + @@ -417,6 +417,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & XEL_RPLR_LENGTH_MASK); + length = min_t(u16, length, ETH_DATA_LEN); length += ETH_HLEN + ETH_FCS_LEN; } else if (proto_type == ETH_P_ARP) @@ -429,6 +430,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) /* Use the length in the frame, plus the header and trailer */ length = proto_type + ETH_HLEN + ETH_FCS_LEN; + if (WARN_ON(length > maxlen)) + length = maxlen; + /* Read from the EmacLite device */ xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET), data, length); @@ -603,7 +607,7 @@ static void xemaclite_rx_handler(struct net_device *dev) skb_reserve(skb, 2); - len = xemaclite_recv_data(lp, (u8 *) skb->data); + len = xemaclite_recv_data(lp, (u8 *) skb->data, len); if (!len) { dev->stats.rx_errors++; -- cgit v1.2.3 From acf138f1b00bdd1b7cd9894562ed0c2a1670888e Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 14 Feb 2017 19:11:45 +0200 Subject: net: xilinx_emaclite: fix freezes due to unordered I/O The xilinx_emaclite uses __raw_writel and __raw_readl for register accesses. Those functions do not imply any kind of memory barriers and they may be reordered. The driver does not seem to take that into account, though, and the driver does not satisfy the ordering requirements of the hardware. For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read() which try to set MDIO address before initiating the transaction. I'm seeing system freezes with the driver with GCC 5.4 and current Linux kernels on Zynq-7000 SoC immediately when trying to use the interface. In commit 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") the driver was switched from non-generic in_be32/out_be32 (memory barriers, big endian) to __raw_readl/__raw_writel (no memory barriers, native endian), so apparently the device follows system endianness and the driver was originally written with the assumption of memory barriers. Rather than try to hunt for each case of missing barrier, just switch the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending on endianness instead. Tested on little-endian Zynq-7000 ARM SoC FPGA. Signed-off-by: Anssi Hannula Fixes: 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 116 ++++++++++++++------------ 1 file changed, 62 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 455774e4741a..aa02a03a6d8d 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -100,6 +100,14 @@ /* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */ #define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT) +#ifdef __BIG_ENDIAN +#define xemaclite_readl ioread32be +#define xemaclite_writel iowrite32be +#else +#define xemaclite_readl ioread32 +#define xemaclite_writel iowrite32 +#endif + /** * struct net_local - Our private per device data * @ndev: instance of the network device @@ -156,15 +164,15 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata) u32 reg_data; /* Enable the Tx interrupts for the first Buffer */ - reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); - __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, - drvdata->base_addr + XEL_TSR_OFFSET); + reg_data = xemaclite_readl(drvdata->base_addr + XEL_TSR_OFFSET); + xemaclite_writel(reg_data | XEL_TSR_XMIT_IE_MASK, + drvdata->base_addr + XEL_TSR_OFFSET); /* Enable the Rx interrupts for the first buffer */ - __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); + xemaclite_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); /* Enable the Global Interrupt Enable */ - __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); + xemaclite_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); } /** @@ -179,17 +187,17 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata) u32 reg_data; /* Disable the Global Interrupt Enable */ - __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); + xemaclite_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); /* Disable the Tx interrupts for the first buffer */ - reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); - __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), - drvdata->base_addr + XEL_TSR_OFFSET); + reg_data = xemaclite_readl(drvdata->base_addr + XEL_TSR_OFFSET); + xemaclite_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), + drvdata->base_addr + XEL_TSR_OFFSET); /* Disable the Rx interrupts for the first buffer */ - reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET); - __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), - drvdata->base_addr + XEL_RSR_OFFSET); + reg_data = xemaclite_readl(drvdata->base_addr + XEL_RSR_OFFSET); + xemaclite_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), + drvdata->base_addr + XEL_RSR_OFFSET); } /** @@ -321,7 +329,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, byte_count = ETH_FRAME_LEN; /* Check if the expected buffer is available */ - reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { @@ -334,7 +342,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, addr = (void __iomem __force *)((u32 __force)addr ^ XEL_BUFFER_OFFSET); - reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) != 0) @@ -345,16 +353,16 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, /* Write the frame to the buffer */ xemaclite_aligned_write(data, (u32 __force *) addr, byte_count); - __raw_writel((byte_count & XEL_TPLR_LENGTH_MASK), - addr + XEL_TPLR_OFFSET); + xemaclite_writel((byte_count & XEL_TPLR_LENGTH_MASK), + addr + XEL_TPLR_OFFSET); /* Update the Tx Status Register to indicate that there is a * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which * is used by the interrupt handler to check whether a frame * has been transmitted */ - reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); - __raw_writel(reg_data, addr + XEL_TSR_OFFSET); + xemaclite_writel(reg_data, addr + XEL_TSR_OFFSET); return 0; } @@ -379,7 +387,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); /* Verify which buffer has valid data */ - reg_data = __raw_readl(addr + XEL_RSR_OFFSET); + reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { if (drvdata->rx_ping_pong != 0) @@ -396,14 +404,14 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) return 0; /* No data was available */ /* Verify that buffer has valid data */ - reg_data = __raw_readl(addr + XEL_RSR_OFFSET); + reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); if ((reg_data & XEL_RSR_RECV_DONE_MASK) != XEL_RSR_RECV_DONE_MASK) return 0; /* No data was available */ } /* Get the protocol type of the ethernet frame that arrived */ - proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET + + proto_type = ((ntohl(xemaclite_readl(addr + XEL_HEADER_OFFSET + XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & XEL_RPLR_LENGTH_MASK); @@ -412,7 +420,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) if (proto_type > ETH_DATA_LEN) { if (proto_type == ETH_P_IP) { - length = ((ntohl(__raw_readl(addr + + length = ((ntohl(xemaclite_readl(addr + XEL_HEADER_IP_LENGTH_OFFSET + XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & @@ -438,9 +446,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) data, length); /* Acknowledge the frame */ - reg_data = __raw_readl(addr + XEL_RSR_OFFSET); + reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); reg_data &= ~XEL_RSR_RECV_DONE_MASK; - __raw_writel(reg_data, addr + XEL_RSR_OFFSET); + xemaclite_writel(reg_data, addr + XEL_RSR_OFFSET); return length; } @@ -467,14 +475,14 @@ static void xemaclite_update_address(struct net_local *drvdata, xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN); - __raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); + xemaclite_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); /* Update the MAC address in the EmacLite */ - reg_data = __raw_readl(addr + XEL_TSR_OFFSET); - __raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); + reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); + xemaclite_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); /* Wait for EmacLite to finish with the MAC address update */ - while ((__raw_readl(addr + XEL_TSR_OFFSET) & + while ((xemaclite_readl(addr + XEL_TSR_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ; } @@ -644,32 +652,32 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) u32 tx_status; /* Check if there is Rx Data available */ - if ((__raw_readl(base_addr + XEL_RSR_OFFSET) & + if ((xemaclite_readl(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) || - (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) + (xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK)) xemaclite_rx_handler(dev); /* Check if the Transmission for the first buffer is completed */ - tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET); + tx_status = xemaclite_readl(base_addr + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; - __raw_writel(tx_status, base_addr + XEL_TSR_OFFSET); + xemaclite_writel(tx_status, base_addr + XEL_TSR_OFFSET); tx_complete = true; } /* Check if the Transmission for the second buffer is completed */ - tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + tx_status = xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; - __raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET); + xemaclite_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); tx_complete = true; } @@ -702,7 +710,7 @@ static int xemaclite_mdio_wait(struct net_local *lp) /* wait for the MDIO interface to not be busy or timeout after some time. */ - while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) & + while (xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) & XEL_MDIOCTRL_MDIOSTS_MASK) { if (time_before_eq(end, jiffies)) { WARN_ON(1); @@ -738,17 +746,17 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) * MDIO Address register. Set the Status bit in the MDIO Control * register to start a MDIO read transaction. */ - ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); - __raw_writel(XEL_MDIOADDR_OP_MASK | - ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), - lp->base_addr + XEL_MDIOADDR_OFFSET); - __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, - lp->base_addr + XEL_MDIOCTRL_OFFSET); + ctrl_reg = xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + xemaclite_writel(XEL_MDIOADDR_OP_MASK | + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + xemaclite_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); if (xemaclite_mdio_wait(lp)) return -ETIMEDOUT; - rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET); + rc = xemaclite_readl(lp->base_addr + XEL_MDIORD_OFFSET); dev_dbg(&lp->ndev->dev, "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n", @@ -785,13 +793,13 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, * Data register. Finally, set the Status bit in the MDIO Control * register to start a MDIO write transaction. */ - ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); - __raw_writel(~XEL_MDIOADDR_OP_MASK & - ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), - lp->base_addr + XEL_MDIOADDR_OFFSET); - __raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); - __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, - lp->base_addr + XEL_MDIOCTRL_OFFSET); + ctrl_reg = xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + xemaclite_writel(~XEL_MDIOADDR_OP_MASK & + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + xemaclite_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); + xemaclite_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); return 0; } @@ -838,8 +846,8 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) /* Enable the MDIO bus by asserting the enable bit in MDIO Control * register. */ - __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, - lp->base_addr + XEL_MDIOCTRL_OFFSET); + xemaclite_writel(XEL_MDIOCTRL_MDIOEN_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); bus = mdiobus_alloc(); if (!bus) { @@ -1144,8 +1152,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev) } /* Clear the Tx CSR's in case this is a restart */ - __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET); - __raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + xemaclite_writel(0, lp->base_addr + XEL_TSR_OFFSET); + xemaclite_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); /* Set the MAC address in the EmacLite device */ xemaclite_update_address(lp, ndev->dev_addr); -- cgit v1.2.3 From 28f4d16570dcf440e54a4d72666d5be452f27d0e Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 15 Feb 2017 10:32:11 -0600 Subject: ibmvnic: Fix endian error when requesting device capabilities When a vNIC client driver requests a faulty device setting, the server returns an acceptable value for the client to request. This 64 bit value was incorrectly being swapped as a 32 bit value, resulting in loss of data. This patch corrects that by using the 64 bit swap function. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 5b66b4fd1767..158b49a0a1d6 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2389,10 +2389,10 @@ static void handle_request_cap_rsp(union ibmvnic_crq *crq, case PARTIALSUCCESS: dev_info(dev, "req=%lld, rsp=%ld in %s queue, retrying.\n", *req_value, - (long int)be32_to_cpu(crq->request_capability_rsp. + (long int)be64_to_cpu(crq->request_capability_rsp. number), name); release_sub_crqs_no_irqs(adapter); - *req_value = be32_to_cpu(crq->request_capability_rsp.number); + *req_value = be64_to_cpu(crq->request_capability_rsp.number); init_sub_crqs(adapter, 1); return; default: -- cgit v1.2.3 From 75224c93fa985f4a6fb983f53208f5c5aa555fbf Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 15 Feb 2017 10:33:33 -0600 Subject: ibmvnic: Fix endian errors in error reporting output Error reports received from firmware were not being converted from big endian values, leading to bogus error codes reported on little endian systems. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 158b49a0a1d6..a07b8d79174c 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2186,12 +2186,12 @@ static void handle_error_info_rsp(union ibmvnic_crq *crq, if (!found) { dev_err(dev, "Couldn't find error id %x\n", - crq->request_error_rsp.error_id); + be32_to_cpu(crq->request_error_rsp.error_id)); return; } dev_err(dev, "Detailed info for error id %x:", - crq->request_error_rsp.error_id); + be32_to_cpu(crq->request_error_rsp.error_id)); for (i = 0; i < error_buff->len; i++) { pr_cont("%02x", (int)error_buff->buff[i]); @@ -2270,8 +2270,8 @@ static void handle_error_indication(union ibmvnic_crq *crq, dev_err(dev, "Firmware reports %serror id %x, cause %d\n", crq->error_indication. flags & IBMVNIC_FATAL_ERROR ? "FATAL " : "", - crq->error_indication.error_id, - crq->error_indication.error_cause); + be32_to_cpu(crq->error_indication.error_id), + be16_to_cpu(crq->error_indication.error_cause)); error_buff = kmalloc(sizeof(*error_buff), GFP_ATOMIC); if (!error_buff) -- cgit v1.2.3