From 3444b26afa145148951112534f298bdc554ec789 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:28 +0000 Subject: USB: add reset endpoint operations Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 20 +++++------ drivers/isdn/hisax/st5481_usb.c | 9 +---- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 1 - drivers/usb/core/devio.c | 2 +- drivers/usb/core/hcd.c | 26 ++++++++++++++ drivers/usb/core/hcd.h | 14 ++++++++ drivers/usb/core/message.c | 58 ++++++++++++++++++++----------- drivers/usb/core/usb.c | 2 +- drivers/usb/storage/transport.c | 4 +-- 9 files changed, 90 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 69b7f8e77596..689cd27ac890 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1025,6 +1025,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct urb *urb = &sc->work_urb; struct bulk_cs_wrap *bcs; + int endp; int len; int rc; @@ -1033,6 +1034,10 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } + endp = usb_pipeendpoint(sc->last_pipe); + if (usb_pipein(sc->last_pipe)) + endp |= USB_DIR_IN; + if (cmd->state == UB_CMDST_CLEAR) { if (urb->status == -EPIPE) { /* @@ -1048,9 +1053,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_sense(sc, cmd); @@ -1065,9 +1068,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat(sc, cmd); @@ -1082,9 +1083,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat_counted(sc, cmd); @@ -2119,8 +2118,7 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe) del_timer_sync(&timer); usb_kill_urb(&sc->work_urb); - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); return 0; } diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c index ec3c0e507669..2b3a055059ea 100644 --- a/drivers/isdn/hisax/st5481_usb.c +++ b/drivers/isdn/hisax/st5481_usb.c @@ -149,14 +149,7 @@ static void usb_ctrl_complete(struct urb *urb) if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) { /* Special case handling for pipe reset */ le16_to_cpus(&ctrl_msg->dr.wIndex); - - /* toggle is reset on clear */ - usb_settoggle(adapter->usb_dev, - ctrl_msg->dr.wIndex & ~USB_DIR_IN, - (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0, - 0); - - + usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex); } if (ctrl_msg->complete) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index d9d974a8f52a..add3395d3248 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1461,7 +1461,6 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) return ret; } - usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0); usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f)); pipe = usb_sndctrlpipe(hdw->usb_dev, 0); diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index df3c539f652a..308609039c73 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg) ret = checkintf(ps, ret); if (ret) return ret; - usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0); + usb_reset_endpoint(ps->dev, ep); return 0; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 81fa8506825d..42b93da1085d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev, hcd->driver->endpoint_disable(hcd, ep); } +/** + * usb_hcd_reset_endpoint - reset host endpoint state + * @udev: USB device. + * @ep: the endpoint to reset. + * + * Resets any host endpoint state such as the toggle bit, sequence + * number and current window. + */ +void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (hcd->driver->endpoint_reset) + hcd->driver->endpoint_reset(hcd, ep); + else { + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + } +} + /* Protect against drivers that try to unlink URBs after the device * is gone, by waiting until all unlinks for @udev are finished. * Since we don't currently track URBs by device, simply wait until diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index f750eb1ab595..e7d4479de41c 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -206,6 +206,11 @@ struct hc_driver { void (*endpoint_disable)(struct usb_hcd *hcd, struct usb_host_endpoint *ep); + /* (optional) reset any endpoint state such as sequence number + and current window */ + void (*endpoint_reset)(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); + /* root hub support */ int (*hub_status_data) (struct usb_hcd *hcd, char *buf); int (*hub_control) (struct usb_hcd *hcd, @@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); +extern void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep); extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); extern int usb_hcd_get_frame_number(struct usb_device *udev); @@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); extern void usb_hc_died(struct usb_hcd *hcd); extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); +/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ +#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) +#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) +#define usb_settoggle(dev, ep, out, bit) \ + ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ + ((bit) << (ep))) + /* -------------------------------------------------------------------------- */ /* Enumeration is only for the hub driver, or HCD virtual root hubs */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 30a0690f3683..b62628377654 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe) * the copy in usb-storage, for as long as we need two copies. */ - /* toggle was reset by the clear */ - usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); + usb_reset_endpoint(dev, endp); return 0; } @@ -1075,6 +1074,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, } } +/** + * usb_reset_endpoint - Reset an endpoint's state. + * @dev: the device whose endpoint is to be reset + * @epaddr: the endpoint's address. Endpoint number for output, + * endpoint number + USB_DIR_IN for input + * + * Resets any host-side endpoint state such as the toggle bit, + * sequence number or current window. + */ +void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr) +{ + unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; + struct usb_host_endpoint *ep; + + if (usb_endpoint_out(epaddr)) + ep = dev->ep_out[epnum]; + else + ep = dev->ep_in[epnum]; + if (ep) + usb_hcd_reset_endpoint(dev, ep); +} +EXPORT_SYMBOL_GPL(usb_reset_endpoint); + + /** * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled @@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); } - dev->toggle[0] = dev->toggle[1] = 0; /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) * usb_enable_endpoint - Enable an endpoint for USB communications * @dev: the device whose interface is being enabled * @ep: the endpoint - * @reset_toggle: flag to set the endpoint's toggle back to 0 + * @reset_ep: flag to reset the endpoint state * - * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers. + * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers. * For control endpoints, both the input and output sides are handled. */ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, - bool reset_toggle) + bool reset_ep) { int epnum = usb_endpoint_num(&ep->desc); int is_out = usb_endpoint_dir_out(&ep->desc); int is_control = usb_endpoint_xfer_control(&ep->desc); - if (is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 1, 0); + if (reset_ep) + usb_hcd_reset_endpoint(dev, ep); + if (is_out || is_control) dev->ep_out[epnum] = ep; - } - if (!is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 0, 0); + if (!is_out || is_control) dev->ep_in[epnum] = ep; - } ep->enabled = 1; } @@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, * usb_enable_interface - Enable all the endpoints for an interface * @dev: the device whose interface is being enabled * @intf: pointer to the interface descriptor - * @reset_toggles: flag to set the endpoints' toggles back to 0 + * @reset_eps: flag to reset the endpoints' state * * Enables all the endpoints for the interface's current altsetting. */ void usb_enable_interface(struct usb_device *dev, - struct usb_interface *intf, bool reset_toggles) + struct usb_interface *intf, bool reset_eps) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) - usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles); + usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps); } /** @@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * This issues a standard SET_CONFIGURATION request to the device using * the current configuration. The effect is to reset most USB-related * state in the device, including interface altsettings (reset to zero), - * endpoint halts (cleared), and data toggle (only for bulk and interrupt + * endpoint halts (cleared), and endpoint state (only for bulk and interrupt * endpoints). Other usbcore state is unchanged, including bindings of * usb device drivers to interfaces. * @@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * (multi-interface) devices. Instead, the driver for each interface may * use usb_set_interface() on the interfaces it claims. Be careful though; * some devices don't support the SET_INTERFACE request, and others won't - * reset all the interface state (notably data toggles). Resetting the whole + * reset all the interface state (notably endpoint state). Resetting the whole * configuration would affect other drivers' interfaces. * * The caller must own the device lock. @@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev) if (retval < 0) return retval; - dev->toggle[0] = dev->toggle[1] = 0; - /* re-init hc/hcd interface/endpoint state */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dcfc072630c1..7eee400d3e32 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; /* ep0 maxpacket comes later, from device descriptor */ - usb_enable_endpoint(dev, &dev->ep0, true); + usb_enable_endpoint(dev, &dev->ep0, false); dev->can_submit = 1; /* Save readable and stable topology id, distinguishing devices diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 49aedb36dc19..fcb320217218 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) USB_ENDPOINT_HALT, endp, NULL, 0, 3*HZ); - /* reset the endpoint toggle */ if (result >= 0) - usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe), - usb_pipeout(pipe), 0); + usb_reset_endpoint(us->pusb_dev, endp); US_DEBUGP("%s: result = %d\n", __func__, result); return result; -- cgit v1.2.3