From 07b155031fb32b3c6ab7f9933a9c280146e4a7b2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jul 2013 23:03:36 +0200 Subject: ath10k: ATH10K should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_ring_free': drivers/net/wireless/ath/ath10k/htt_rx.c:113: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_htt_rx_amsdu_pop': drivers/net/wireless/ath/ath10k/htt_rx.c:296: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:389: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `__ath10k_htt_rx_ring_fill_n': drivers/net/wireless/ath/ath10k/htt_rx.c:146: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/htt_rx.c:150: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_attach': drivers/net/wireless/ath/ath10k/htt_rx.c:474: undefined reference to `dma_alloc_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:509: undefined reference to `dma_free_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:514: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_htt_rx_detach': drivers/net/wireless/ath/ath10k/htt_rx.c:220: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:228: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' Signed-off-by: Geert Uytterhoeven Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig index cde58fe96254..82e8088ca9b4 100644 --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig @@ -1,6 +1,6 @@ config ATH10K tristate "Atheros 802.11ac wireless cards support" - depends on MAC80211 + depends on MAC80211 && HAS_DMA select ATH_COMMON ---help--- This module adds support for wireless adapters based on -- cgit v1.2.3 From a1923f1d4723e5757cefdd60f7c7ab30e472007a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 18 Jul 2013 19:11:26 +0300 Subject: iwlwifi: add DELL SKU for 5150 HMC This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Cc: [all versions] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 81f3ea5b09a4..ff13458efc27 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -130,6 +130,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */ {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */ {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */ + {IWL_PCI_DEVICE(0x423C, 0x1326, iwl5150_abg_cfg)}, /* Half Mini Card */ {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */ {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */ -- cgit v1.2.3 From 5312e54d7e8bfe9716a1ffbc50e0093aadde46b8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 22 Jul 2013 18:26:56 +0200 Subject: iwlwifi: mvm: use only a single GTK in D3 Unfortunately, the firmware only supports replay counters for a single GTK in D3, so that we should only upload the last key and use its replay counters. Since mac80211 key iteration will walk through the keys in order of their addition, simply use the same HW key index (1) for all GTKs, thus overwriting previous ones with newer ones. The replay counters for it are already used. Reviewed-by: Yaron Vaknin Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/d3.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 7e5e5c2f9f87..83da884cf303 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -134,7 +134,7 @@ struct wowlan_key_data { struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc; struct iwl_wowlan_tkip_params_cmd *tkip; bool error, use_rsc_tsc, use_tkip; - int gtk_key_idx; + int wep_key_idx; }; static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, @@ -188,8 +188,8 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, wkc.wep_key.key_offset = 0; } else { /* others start at 1 */ - data->gtk_key_idx++; - wkc.wep_key.key_offset = data->gtk_key_idx; + data->wep_key_idx++; + wkc.wep_key.key_offset = data->wep_key_idx; } ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC, @@ -316,8 +316,13 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, mvm->ptk_ivlen = key->iv_len; mvm->ptk_icvlen = key->icv_len; } else { - data->gtk_key_idx++; - key->hw_key_idx = data->gtk_key_idx; + /* + * firmware only supports TSC/RSC for a single key, + * so if there are multiple keep overwriting them + * with new ones -- this relies on mac80211 doing + * list_add_tail(). + */ + key->hw_key_idx = 1; mvm->gtk_ivlen = key->iv_len; mvm->gtk_icvlen = key->icv_len; } -- cgit v1.2.3 From bb963c4a43eb5127eb0bbfa16c7a6a209b0af5db Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Tue, 23 Jul 2013 14:13:32 +0300 Subject: iwlwifi: mvm: set SSID bits for passive channels Set SSID bitmap for direct scan even on passive channels, for the passive-to-active feature. Without this patch only the SSID from probe request template is sent on passive channels, after passive-to-active switching, causing us to not find all desired networks. Remove the unused passive scan mask constant. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: David Spinadel Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 1 - drivers/net/wireless/iwlwifi/mvm/scan.c | 11 ++--------- 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index b60d14151721..365095a0c3b3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -69,7 +69,6 @@ /* Scan Commands, Responses, Notifications */ /* Masks for iwl_scan_channel.type flags */ -#define SCAN_CHANNEL_TYPE_PASSIVE 0 #define SCAN_CHANNEL_TYPE_ACTIVE BIT(0) #define SCAN_CHANNEL_NARROW_BAND BIT(22) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 268f027b45b0..acdff6b67e04 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -178,19 +178,12 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, struct iwl_scan_channel *chan = (struct iwl_scan_channel *) (cmd->data + le16_to_cpu(cmd->tx_cmd.len)); int i; - __le32 chan_type_value; - - if (req->n_ssids > 0) - chan_type_value = cpu_to_le32(BIT(req->n_ssids) - 1); - else - chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE; for (i = 0; i < cmd->channel_count; i++) { chan->channel = cpu_to_le16(req->channels[i]->hw_value); + chan->type = cpu_to_le32(BIT(req->n_ssids) - 1); if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) - chan->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - chan->type = chan_type_value; + chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE); chan->active_dwell = cpu_to_le16(active_dwell); chan->passive_dwell = cpu_to_le16(passive_dwell); chan->iteration_count = cpu_to_le16(1); -- cgit v1.2.3 From 84eb2ae1807dd1467bf6f500fc69ae61f1907b75 Mon Sep 17 00:00:00 2001 From: Thomas Loo Date: Wed, 3 Jul 2013 02:53:54 +0200 Subject: Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330] The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012 WLAN/BT-Combo card. Add device ID to the ath3k driver to enable the bluetooth side of things. Patch against v3.10. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=1330 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Thomas Loo Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 11f467c00d0a..b22376dee2c0 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -91,6 +91,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0489, 0xe04e) }, { USB_DEVICE(0x0489, 0xe056) }, { USB_DEVICE(0x0489, 0xe04d) }, + { USB_DEVICE(0x04c5, 0x1330) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -128,6 +129,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7a7e5f8ecadc..8b8b85dced76 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -151,6 +151,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 517828a87994f41af6ae5a0f96f0f069f05baa81 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 8 Jul 2013 10:27:23 +0200 Subject: Bluetooth: ath3k: don't use stack memory for DMA Memory allocated by vmalloc (including stack) can not be used for DMA, i.e. data pointer on usb_control_msg() should not point to stack memory. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=977558 Reported-and-tested-by: Andy Lawrence Signed-off-by: Stanislaw Gruszka Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index b22376dee2c0..6f17e4dec441 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -195,24 +195,44 @@ error: static int ath3k_get_state(struct usb_device *udev, unsigned char *state) { - int pipe = 0; + int ret, pipe = 0; + char *buf; + + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; pipe = usb_rcvctrlpipe(udev, 0); - return usb_control_msg(udev, pipe, ATH3K_GETSTATE, - USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, - state, 0x01, USB_CTRL_SET_TIMEOUT); + ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT); + + *state = *buf; + kfree(buf); + + return ret; } static int ath3k_get_version(struct usb_device *udev, struct ath3k_version *version) { - int pipe = 0; + int ret, pipe = 0; + struct ath3k_version *buf; + const int size = sizeof(*buf); + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; pipe = usb_rcvctrlpipe(udev, 0); - return usb_control_msg(udev, pipe, ATH3K_GETVERSION, - USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version, - sizeof(struct ath3k_version), - USB_CTRL_SET_TIMEOUT); + ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + buf, size, USB_CTRL_SET_TIMEOUT); + + memcpy(version, buf, size); + kfree(buf); + + return ret; } static int ath3k_load_fwfile(struct usb_device *udev, -- cgit v1.2.3 From d9c78e9738ccd0017b10b8f44462aafb61904a4a Mon Sep 17 00:00:00 2001 From: Adam Lee Date: Wed, 10 Jul 2013 10:02:12 +0800 Subject: Bluetooth: fix wrong use of PTR_ERR() in btusb PTR_ERR() returns a signed long type value which is limited by IS_ERR(), it must be a negative number whose range is [-MAX_ERRNO, 0). The bug here returns negative numbers as error codes, then check it by "if (ret < 0)", but -PTR_ERR() is actually positive. The wrong use here leads to failure as below, even panic. [ 12.958920] Bluetooth: hci0 command 0xfc8e tx timeout [ 14.961765] Bluetooth: hci0 command 0xfc8e tx timeout [ 16.964688] Bluetooth: hci0 command 0xfc8e tx timeout [ 20.954501] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 22.957358] Bluetooth: hci0 command 0xfc8e tx timeout [ 30.948922] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 32.951780] Bluetooth: hci0 command 0xfc8e tx timeout [ 40.943359] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 42.946219] Bluetooth: hci0 command 0xfc8e tx timeout [ 50.937812] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 52.940670] Bluetooth: hci0 command 0xfc8e tx timeout [ 60.932236] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 62.935092] Bluetooth: hci0 command 0xfc8e tx timeout [ 70.926688] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 72.929545] Bluetooth: hci0 command 0xfc8e tx timeout [ 80.921111] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 82.923969] Bluetooth: hci0 command 0xfc2f tx timeout [ 90.915542] Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110) [ 92.918406] Bluetooth: hci0 command 0xfc11 tx timeout [ 100.909955] Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110) [ 102.912858] Bluetooth: hci0 command 0xfc60 tx timeout [ 110.904394] Bluetooth: hci0 sending Intel patch command (0xfc60) failed (-110) [ 112.907293] Bluetooth: hci0 command 0xfc11 tx timeout [ 120.898831] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110) [ 120.904757] bluetoothd[1030]: segfault at 4 ip 00007f8b2eb55236 sp 00007fff53ff6920 error 4 in bluetoothd[7f8b2eaff000+cb000] Signed-off-by: Adam Lee Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 8b8b85dced76..ad03394dfcdb 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1093,7 +1093,7 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev, if (IS_ERR(skb)) { BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)", hdev->name, cmd->opcode, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } /* It ensures that the returned event matches the event data read from @@ -1145,7 +1145,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) if (IS_ERR(skb)) { BT_ERR("%s sending initial HCI reset command failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); @@ -1159,7 +1159,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) if (IS_ERR(skb)) { BT_ERR("%s reading Intel fw version command failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } if (skb->len != sizeof(*ver)) { @@ -1217,7 +1217,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) BT_ERR("%s entering Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); release_firmware(fw); - return -PTR_ERR(skb); + return PTR_ERR(skb); } if (skb->data[0]) { @@ -1274,7 +1274,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); @@ -1290,7 +1290,7 @@ exit_mfg_disable: if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); @@ -1308,7 +1308,7 @@ exit_mfg_deactivate: if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); -- cgit v1.2.3 From 5b77a1f3d7b7360dc2b7c6d2188d39b9f8432907 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 15 Jul 2013 09:29:03 +0530 Subject: Bluetooth: ath3k: Add support for ID 0x13d3/0x3402 T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3402 Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Bug: https://bugzilla.kernel.org/show_bug.cgi?id=59701 Signed-off-by: Sujith Manoharan Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 6f17e4dec441..81973eccce52 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -92,6 +92,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0489, 0xe056) }, { USB_DEVICE(0x0489, 0xe04d) }, { USB_DEVICE(0x04c5, 0x1330) }, + { USB_DEVICE(0x13d3, 0x3402) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -130,6 +131,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index ad03394dfcdb..c4145c786df6 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -152,6 +152,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 1ebd0b21ab14efb75950079840eac29afea2a26e Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Wed, 17 Jul 2013 11:27:40 +0800 Subject: Bluetooth: Add support for Atheros [0cf3:3121] Add support for the AR3012 chip. T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3121 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 81973eccce52..d3a2d6fafffb 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -93,6 +93,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0489, 0xe04d) }, { USB_DEVICE(0x04c5, 0x1330) }, { USB_DEVICE(0x13d3, 0x3402) }, + { USB_DEVICE(0x0cf3, 0x3121) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -132,6 +133,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c4145c786df6..fd5eaa30b52b 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -153,6 +153,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 1d5b569ef85d013a775560a90050dc630614c045 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 20 Jun 2013 13:38:45 +0800 Subject: Bluetooth: Add support for Atheros [0cf3:e003] Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e003 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Cc: Stable Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index d3a2d6fafffb..a12b923bbaca 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -94,6 +94,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04c5, 0x1330) }, { USB_DEVICE(0x13d3, 0x3402) }, { USB_DEVICE(0x0cf3, 0x3121) }, + { USB_DEVICE(0x0cf3, 0xe003) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -134,6 +135,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index fd5eaa30b52b..5fb06eca8d1f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -154,6 +154,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 2997494fa66a1c94717d69c3cfae0a94462093c6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 24 Jul 2013 10:19:06 +0300 Subject: iwlwifi: pcie: reset the NIC before the bring up This allows to clean all kinds of bad state it might be in. This solves situation where HW RFkill was switched while the NIC was offline. Until now, we relied on the firmware to do clean the interrupt, but new firmwares don't do that any more. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/trans.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 826c15602c46..96cfcdd39079 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -670,6 +670,11 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) return err; } + /* Reset the entire device */ + iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + + usleep_range(10, 15); + iwl_pcie_apm_init(trans); /* From now on, the op_mode will be kept updated about RF kill state */ -- cgit v1.2.3 From ea183d02e1ddfda1996d7df1e55f3a639830e335 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Tue, 23 Jul 2013 14:41:53 +0300 Subject: iwlwifi: mvm: Disable managed PS when GO is added The managed interface PS was not disabled when a GO interface was added. As a consequence, when the station VMAC was in PS, the GO also was not on the medium. Fix this. Signed-off-by: Ilan Peer Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 42 ++++++++++++++--------------- 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 1eedc424051c..f19baf0dea6b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -511,6 +511,27 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, if (ret) goto out_unlock; + /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single MAC. + * If new interface added, disable PM on existing interface. + * P2P device is a special case, since it is handled by FW similary to + * scan. If P2P deviced is added, PM remains enabled on existing + * interface. + * Note: the method below does not count the new interface being added + * at this moment. + */ + if (vif->type != NL80211_IFTYPE_P2P_DEVICE) + mvm->vif_count++; + if (mvm->vif_count > 1) { + IWL_DEBUG_MAC80211(mvm, + "Disable power on existing interfaces\n"); + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_pm_disable_iterator, mvm); + } + /* * The AP binding flow can be done only after the beacon * template is configured (which happens only in the mac80211 @@ -534,27 +555,6 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, goto out_unlock; } - /* - * TODO: remove this temporary code. - * Currently MVM FW supports power management only on single MAC. - * If new interface added, disable PM on existing interface. - * P2P device is a special case, since it is handled by FW similary to - * scan. If P2P deviced is added, PM remains enabled on existing - * interface. - * Note: the method below does not count the new interface being added - * at this moment. - */ - if (vif->type != NL80211_IFTYPE_P2P_DEVICE) - mvm->vif_count++; - if (mvm->vif_count > 1) { - IWL_DEBUG_MAC80211(mvm, - "Disable power on existing interfaces\n"); - ieee80211_iterate_active_interfaces_atomic( - mvm->hw, - IEEE80211_IFACE_ITER_NORMAL, - iwl_mvm_pm_disable_iterator, mvm); - } - ret = iwl_mvm_mac_ctxt_add(mvm, vif); if (ret) goto out_release; -- cgit v1.2.3 From b6658ff80c43bcf84be0bbe371c88af1452e7776 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Jul 2013 13:55:51 +0200 Subject: iwlwifi: mvm: fix flushing not started aggregation sessions When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [] warn_slowpath_common+0x72/0xa0 [] warn_slowpath_fmt+0x47/0x50 [] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [] __sta_info_destroy+0x66/0x370 [mac80211] [] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [] ieee80211_del_station+0x26/0x50 [mac80211] [] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/sta.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 85d4bbe52157..563f559b902d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -915,6 +915,7 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; u16 txq_id; + enum iwl_mvm_agg_state old_state; /* * First set the agg state to OFF to avoid calling @@ -924,13 +925,17 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, txq_id = tid_data->txq_id; IWL_DEBUG_TX_QUEUES(mvm, "Flush AGG: sta %d tid %d q %d state %d\n", mvmsta->sta_id, tid, txq_id, tid_data->state); + old_state = tid_data->state; tid_data->state = IWL_AGG_OFF; spin_unlock_bh(&mvmsta->lock); - if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) - IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + if (old_state >= IWL_AGG_ON) { + if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) + IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + + iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); + } - iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); mvm->queue_to_mac80211[tid_data->txq_id] = IWL_INVALID_MAC80211_QUEUE; -- cgit v1.2.3 From a53ee0a308b16e392e0219c585b10f329345766b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 25 Jul 2013 13:14:34 +0300 Subject: iwlwifi: pcie: clear RFKILL interrupt in AMPG If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-prph.h | 2 ++ drivers/net/wireless/iwlwifi/pcie/rx.c | 8 ++++++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index ff8cc75c189d..a70c7b9d9bad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -97,6 +97,8 @@ #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +#define APMG_RTC_INT_STT_RFKILL (0x10000000) + /* Device system time */ #define DEVICE_SYSTEM_TIME_REG 0xA0206C diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index fd848cd1583e..f600e68a410a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -888,6 +888,14 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill) { + /* + * Clear the interrupt in APMG if the NIC is going down. + * Note that when the NIC exits RFkill (else branch), we + * can't access prph and the NIC will be reset in + * start_hw anyway. + */ + iwl_write_prph(trans, APMG_RTC_INT_STT_REG, + APMG_RTC_INT_STT_RFKILL); set_bit(STATUS_RFKILL, &trans_pcie->status); if (test_and_clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status)) -- cgit v1.2.3 From 83e612f632c3897be29ef02e0472f6d63e258378 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomasz=20Mo=C5=84?= Date: Tue, 23 Jul 2013 07:42:49 +0200 Subject: mwifiex: Add missing endian conversion. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Both type and pkt_len variables are in host endian and these should be in Little Endian in the payload. Signed-off-by: Tomasz Moń Acked-by: Bing Zhao Cc: Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sdio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index 5ef49f2e375a..09185c963248 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -1639,8 +1639,8 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter, /* Allocate buffer and copy payload */ blk_size = MWIFIEX_SDIO_BLOCK_SIZE; buf_block_len = (pkt_len + blk_size - 1) / blk_size; - *(u16 *) &payload[0] = (u16) pkt_len; - *(u16 *) &payload[2] = type; + *(__le16 *)&payload[0] = cpu_to_le16((u16)pkt_len); + *(__le16 *)&payload[2] = cpu_to_le16(type); /* * This is SDIO specific header -- cgit v1.2.3 From a538ae3189a9fa4095ca58c14bc6593622c89ab9 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 25 Jul 2013 23:01:34 +0200 Subject: brcmfmac: inform cfg80211 about disconnect when device is unplugged When the brcmfmac device is physically removed cfg80211 gives a warning upon unregistering the net device (see below). [23052.390197] WARNING: CPU: 0 PID: 30 at net/wireless/core.c:937 cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211]() [23052.400843] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) pl2303 usbserial binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event lpc_ich snd_seq snd_timer snd_seq_device snd psmouse mfd_core serio_raw soundcore snd_page_alloc intel_ips dell_laptop dell_wmi sparse_keymap dcdbas nouveau ttm drm_kms_helper drm i2c_algo_bit mxm_wmi ahci libahci sdhci_pci firewire_ohci firewire_core sdhci crc_itu_t mmc_core intel_agp intel_gtt e1000e ptp pps_core agpgart video [last unloaded: brcmfmac] [23052.452987] CPU: 0 PID: 30 Comm: khubd Tainted: G O 3.11.0-rc1-wl-testing-lockdep-00002-g41cc093-dirty #1 [23052.463480] Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 [23052.470852] 00000000 00000000 f4efdc18 c1522e3d f845bed2 f4efdc48 c103fbe4 c16a9254 [23052.478762] 00000000 0000001e f845bed2 000003a9 f841da44 f841da44 f3790004 f25539c0 [23052.486741] e2700200 f4efdc58 c103fc22 00000009 00000000 f4efdcc0 f841da44 00000002 [23052.494712] Call Trace: [23052.497165] [] dump_stack+0x4b/0x66 [23052.501685] [] warn_slowpath_common+0x84/0xa0 [23052.507085] [] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.514542] [] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.521981] [] warn_slowpath_null+0x22/0x30 [23052.527191] [] cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.534494] [] ? packet_notifier+0xc8/0x1d0 [23052.539703] [] ? packet_notifier+0xdc/0x1d0 [23052.544880] [] ? packet_seq_stop+0x30/0x30 [23052.550002] [] notifier_call_chain+0x45/0x60 [23052.555298] [] raw_notifier_call_chain+0x1f/0x30 [23052.560963] [] call_netdevice_notifiers_info+0x33/0x70 [23052.567153] [] ? qdisc_destroy+0x99/0xb0 [23052.572116] [] call_netdevice_notifiers+0x13/0x20 [23052.577861] [] rollback_registered_many+0xf3/0x1d0 [23052.583687] [] ? mutex_lock_nested+0x25c/0x350 [23052.589150] [] rollback_registered+0x24/0x40 [23052.594445] [] unregister_netdevice_queue+0x4f/0xb0 [23052.600344] [] unregister_netdev+0x19/0x30 [23052.605484] [] brcmf_del_if+0xbf/0x160 [brcmfmac] [23052.611223] [] brcmf_detach+0x5e/0xd0 [brcmfmac] [23052.616881] [] brcmf_usb_disconnect+0x63/0xa0 [brcmfmac] [23052.623217] [] usb_unbind_interface+0x4a/0x180 When the device is physically connected the driver sends a disassoc command to the device and response triggers the driver to inform cfg80211 about it. However, with the device removed the disassoc command fails. This patch adds a call to cfg80211_disconnected() when that command fails. The warning was added by commit below and also cleans up, but better doing it in the driver if only to get rid of the warning. commit f9bef3df52fe61067e4c1c6cfb2037cb6b259a6a Author: Ben Greear Date: Wed Jun 19 14:06:26 2013 -0700 wireless: check for dangling wdev->current_bss pointer Cc: Ben Greear Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 277b37ae7126..7fa71f73cfe8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -1093,8 +1093,11 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif) brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n "); err = brcmf_fil_cmd_data_set(vif->ifp, BRCMF_C_DISASSOC, NULL, 0); - if (err) + if (err) { brcmf_err("WLC_DISASSOC failed (%d)\n", err); + cfg80211_disconnected(vif->wdev.netdev, 0, + NULL, 0, GFP_KERNEL); + } clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state); } clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state); -- cgit v1.2.3 From e2288b66fe7ff0288382b2af671b4da558b44472 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sun, 28 Jul 2013 13:17:22 +0200 Subject: rt2x00: fix stop queue Since we clear QUEUE_STARTED in rt2x00queue_stop_queue(), following call to rt2x00queue_pause_queue() reduce to noop, i.e we do not stop queue in mac80211. To fix that introduce rt2x00queue_pause_queue_nocheck() function, which will stop queue in mac80211 directly. Note that rt2x00_start_queue() explicitly set QUEUE_PAUSED bit. Note also that reordering operations i.e. first call to rt2x00queue_pause_queue() and then clear QUEUE_STARTED bit, will race with rt2x00queue_unpause_queue(), so calling ieee80211_stop_queue() directly is the only available solution to fix the problem without major rework. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 6c0a91ff963c..aa95c6cf3545 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -936,13 +936,8 @@ void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index) spin_unlock_irqrestore(&queue->index_lock, irqflags); } -void rt2x00queue_pause_queue(struct data_queue *queue) +void rt2x00queue_pause_queue_nocheck(struct data_queue *queue) { - if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) || - !test_bit(QUEUE_STARTED, &queue->flags) || - test_and_set_bit(QUEUE_PAUSED, &queue->flags)) - return; - switch (queue->qid) { case QID_AC_VO: case QID_AC_VI: @@ -958,6 +953,15 @@ void rt2x00queue_pause_queue(struct data_queue *queue) break; } } +void rt2x00queue_pause_queue(struct data_queue *queue) +{ + if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) || + !test_bit(QUEUE_STARTED, &queue->flags) || + test_and_set_bit(QUEUE_PAUSED, &queue->flags)) + return; + + rt2x00queue_pause_queue_nocheck(queue); +} EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue); void rt2x00queue_unpause_queue(struct data_queue *queue) @@ -1019,7 +1023,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue) return; } - rt2x00queue_pause_queue(queue); + rt2x00queue_pause_queue_nocheck(queue); queue->rt2x00dev->ops->lib->stop_queue(queue); -- cgit v1.2.3 From 953b3539ef9301b8ef73f4b6e2fd824b86aae65a Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 29 Jul 2013 16:32:37 -0700 Subject: mwifiex: check for bss_role instead of bss_mode for STA operations This patch fixes an issue wherein association would fail on P2P interfaces. This happened because we are checking priv->mode against NL80211_IFTYPE_STATION. While this check is correct for infrastructure stations, it would fail P2P clients for which mode is NL80211_IFTYPE_P2P_CLIENT. Better check would be bss_role which has only 2 values: STA/AP. Cc: # 3.10.y Signed-off-by: Avinash Patil Signed-off-by: Stone Piao Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 4 ++-- drivers/net/wireless/mwifiex/join.c | 6 ++++-- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index ef5fa890a286..89459db4c53b 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1716,9 +1716,9 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); int ret; - if (priv->bss_mode != NL80211_IFTYPE_STATION) { + if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) { wiphy_err(wiphy, - "%s: reject infra assoc request in non-STA mode\n", + "%s: reject infra assoc request in non-STA role\n", dev->name); return -EINVAL; } diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 1c8a771e8e81..12e778159ec5 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -1291,8 +1291,10 @@ int mwifiex_associate(struct mwifiex_private *priv, { u8 current_bssid[ETH_ALEN]; - /* Return error if the adapter or table entry is not marked as infra */ - if ((priv->bss_mode != NL80211_IFTYPE_STATION) || + /* Return error if the adapter is not STA role or table entry + * is not marked as infra. + */ + if ((GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) || (bss_desc->bss_mode != NL80211_IFTYPE_STATION)) return -1; -- cgit v1.2.3 From 237b2ac8ac89a6b0120decdd05c7bf4637deb98a Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 29 Jul 2013 16:32:38 -0700 Subject: mwifiex: fix wrong data rates in P2P client This patch fixes an issue wherein adhoc rates were being copied into association request from P2P client. Cc: # 3.10.y Signed-off-by: Avinash Patil Signed-off-by: Stone Piao Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c index 988552dece75..5178c4630d89 100644 --- a/drivers/net/wireless/mwifiex/cfp.c +++ b/drivers/net/wireless/mwifiex/cfp.c @@ -415,7 +415,8 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates) u32 k = 0; struct mwifiex_adapter *adapter = priv->adapter; - if (priv->bss_mode == NL80211_IFTYPE_STATION) { + if (priv->bss_mode == NL80211_IFTYPE_STATION || + priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) { switch (adapter->config_bands) { case BAND_B: dev_dbg(adapter->dev, "info: infra band=%d " -- cgit v1.2.3 From 6621fe18cdce50df9c3954f878183321dfe3078c Mon Sep 17 00:00:00 2001 From: Stone Piao Date: Mon, 29 Jul 2013 16:32:39 -0700 Subject: mwifiex: fix command 0x2c timeout during p2p_find or p2p_connect We missed bss_mode check for P2P client. Signed-off-by: Stone Piao Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 206c3e038072..8af97abf7108 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -257,10 +257,10 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, goto done; } - if (priv->bss_mode == NL80211_IFTYPE_STATION) { + if (priv->bss_mode == NL80211_IFTYPE_STATION || + priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) { u8 config_bands; - /* Infra mode */ ret = mwifiex_deauthenticate(priv, NULL); if (ret) goto done; -- cgit v1.2.3