From 879f2fea8a5a748bcbf98d2cdce9139c045505d3 Mon Sep 17 00:00:00 2001 From: Andrey Gelman Date: Tue, 6 Oct 2015 15:43:43 -0700 Subject: Input: ads7846 - correct the value got from SPI According to the touch controller spec, SPI return a 16 bit value, only 12 bits are valid, they are bit[14-3]. The value of MISO and MOSI can be configured when SPI is in idle mode. Currently this touch driver assumes the SPI bus sets the MOSI and MISO in low level when SPI bus is in idle mode. So the bit[15] of the value got from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in high level during the SPI idle mode, the bit[15] of the value get from SPI is always 1. If bit[15] is not masked, we may get the wrong value. Mask the invalid bit to make sure the correct value gets returned. Regardless of the SPI bus idle configuration. Signed-off-by: Andrey Gelman Signed-off-by: Haibo Chen Signed-off-by: Igor Grinberg Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 0f5f968592bd..04edc8f7122f 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -668,18 +668,22 @@ static int ads7846_no_filter(void *ads, int data_idx, int *val) static int ads7846_get_value(struct ads7846 *ts, struct spi_message *m) { + int value; struct spi_transfer *t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list); if (ts->model == 7845) { - return be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3; + value = be16_to_cpup((__be16 *)&(((char *)t->rx_buf)[1])); } else { /* * adjust: on-wire is a must-ignore bit, a BE12 value, then * padding; built from two 8 bit values written msb-first. */ - return be16_to_cpup((__be16 *)t->rx_buf) >> 3; + value = be16_to_cpup((__be16 *)t->rx_buf); } + + /* enforce ADC output is 12 bits width */ + return (value >> 3) & 0xfff; } static void ads7846_update_value(struct spi_message *m, int val) -- cgit v1.2.3 From a487c03fa28286d0de42558da1aa57d82d54fc4d Mon Sep 17 00:00:00 2001 From: Dudley Du Date: Mon, 12 Oct 2015 10:16:16 -0700 Subject: Input: cyapa - fix the copy paste error on electrodes_rx value Fix the copy paste error on the electrodes_rx value set code which will cause the electrodes_rx value be always set to the value of electrodes_y. Reported-by: Sudip Mukherjee Signed-off-by: Dudley Du Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/cyapa_gen6.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/cyapa_gen6.c b/drivers/input/mouse/cyapa_gen6.c index 5f191071d44a..e4eb048d1bf6 100644 --- a/drivers/input/mouse/cyapa_gen6.c +++ b/drivers/input/mouse/cyapa_gen6.c @@ -241,14 +241,10 @@ static int cyapa_gen6_read_sys_info(struct cyapa *cyapa) memcpy(&cyapa->product_id[13], &resp_data[62], 2); cyapa->product_id[15] = '\0'; + /* Get the number of Rx electrodes. */ rotat_align = resp_data[68]; - if (rotat_align) { - cyapa->electrodes_rx = cyapa->electrodes_y; - cyapa->electrodes_rx = cyapa->electrodes_y; - } else { - cyapa->electrodes_rx = cyapa->electrodes_x; - cyapa->electrodes_rx = cyapa->electrodes_y; - } + cyapa->electrodes_rx = + rotat_align ? cyapa->electrodes_y : cyapa->electrodes_x; cyapa->aligned_electrodes_rx = (cyapa->electrodes_rx + 3) & ~3u; if (!cyapa->electrodes_x || !cyapa->electrodes_y || -- cgit v1.2.3