From 11a64888c79bb0bb62f575e5fe158af434155566 Mon Sep 17 00:00:00 2001 From: Yan-Hsuan Chuang Date: Wed, 18 Mar 2020 17:52:24 +0800 Subject: rtw88: 8822c: config RF table path B before path A After MAC switched power, the hardware's RF registers will have its default value, but the default value for path B is incorrect. So, load RF path B first, to decrease the period between MAC on and RF path B config. By test, if we load path A first, then there's ~300ms that the path B is incorrect, it could lead to BT coex's A2DP glitch. But if we configure path B first, there will only have ~3ms, significantly lower possibility to have A2DP sound glitch. Signed-off-by: Yan-Hsuan Chuang Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200318095224.12940-1-yhchuang@realtek.com --- drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c index 146f693c7592..d2469f91976b 100644 --- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c +++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c @@ -4128,7 +4128,7 @@ struct rtw_chip_info rtw8822c_hw_spec = { .agc_tbl = &rtw8822c_agc_tbl, .bb_tbl = &rtw8822c_bb_tbl, .rfk_init_tbl = &rtw8822c_array_mp_cal_init_tbl, - .rf_tbl = {&rtw8822c_rf_a_tbl, &rtw8822c_rf_b_tbl}, + .rf_tbl = {&rtw8822c_rf_b_tbl, &rtw8822c_rf_a_tbl}, .rfe_defs = rtw8822c_rfe_defs, .rfe_defs_size = ARRAY_SIZE(rtw8822c_rfe_defs), .en_dis_dpd = true, -- cgit v1.2.3