From 0cd96eb0a74791cacb27ace902b991cfd0e72abe Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 31 Oct 2010 21:06:59 +0100 Subject: i2c-i801: Handle multiple instances instead of keeping global state It's poor form to keep driver state in global variables rather than per-instance. It never really mattered in practice when there was only one controller on the chipset, but the latest chipsets do have more than one controller, so now we care. Signed-off-by: David Woodhouse Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 319 +++++++++++++++++++++++------------------- 1 file changed, 175 insertions(+), 144 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 1fe30da653c3..56883f48c2e4 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -3,6 +3,8 @@ Philip Edelbrock , and Mark D. Studebaker Copyright (C) 2007, 2008 Jean Delvare + Copyright (C) 2010 Intel Corporation, + David Woodhouse This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -55,8 +57,6 @@ See the file Documentation/i2c/busses/i2c-i801 for details. */ -/* Note: we assume there can only be one I801, with one SMBus interface */ - #include #include #include @@ -70,16 +70,16 @@ #include /* I801 SMBus address offsets */ -#define SMBHSTSTS (0 + i801_smba) -#define SMBHSTCNT (2 + i801_smba) -#define SMBHSTCMD (3 + i801_smba) -#define SMBHSTADD (4 + i801_smba) -#define SMBHSTDAT0 (5 + i801_smba) -#define SMBHSTDAT1 (6 + i801_smba) -#define SMBBLKDAT (7 + i801_smba) -#define SMBPEC (8 + i801_smba) /* ICH3 and later */ -#define SMBAUXSTS (12 + i801_smba) /* ICH4 and later */ -#define SMBAUXCTL (13 + i801_smba) /* ICH4 and later */ +#define SMBHSTSTS(p) (0 + (p)->smba) +#define SMBHSTCNT(p) (2 + (p)->smba) +#define SMBHSTCMD(p) (3 + (p)->smba) +#define SMBHSTADD(p) (4 + (p)->smba) +#define SMBHSTDAT0(p) (5 + (p)->smba) +#define SMBHSTDAT1(p) (6 + (p)->smba) +#define SMBBLKDAT(p) (7 + (p)->smba) +#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ +#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ +#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ /* PCI Address Constants */ #define SMBBAR 4 @@ -128,16 +128,20 @@ SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \ SMBHSTSTS_INTR) -static unsigned long i801_smba; -static unsigned char i801_original_hstcfg; +struct i801_priv { + struct i2c_adapter adapter; + unsigned long smba; + unsigned char original_hstcfg; + struct pci_dev *pci_dev; + unsigned int features; +}; + static struct pci_driver i801_driver; -static struct pci_dev *I801_dev; #define FEATURE_SMBUS_PEC (1 << 0) #define FEATURE_BLOCK_BUFFER (1 << 1) #define FEATURE_BLOCK_PROC (1 << 2) #define FEATURE_I2C_BLOCK_READ (1 << 3) -static unsigned int i801_features; static const char *i801_feature_names[] = { "SMBus PEC", @@ -152,24 +156,24 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features"); /* Make sure the SMBus host is ready to start transmitting. Return 0 if it is, -EBUSY if it is not. */ -static int i801_check_pre(void) +static int i801_check_pre(struct i801_priv *priv) { int status; - status = inb_p(SMBHSTSTS); + status = inb_p(SMBHSTSTS(priv)); if (status & SMBHSTSTS_HOST_BUSY) { - dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n"); + dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n"); return -EBUSY; } status &= STATUS_FLAGS; if (status) { - dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n", + dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n", status); - outb_p(status, SMBHSTSTS); - status = inb_p(SMBHSTSTS) & STATUS_FLAGS; + outb_p(status, SMBHSTSTS(priv)); + status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; if (status) { - dev_err(&I801_dev->dev, + dev_err(&priv->pci_dev->dev, "Failed clearing status flags (%02x)\n", status); return -EBUSY; @@ -180,48 +184,50 @@ static int i801_check_pre(void) } /* Convert the status register to an error code, and clear it. */ -static int i801_check_post(int status, int timeout) +static int i801_check_post(struct i801_priv *priv, int status, int timeout) { int result = 0; /* If the SMBus is still busy, we give up */ if (timeout) { - dev_err(&I801_dev->dev, "Transaction timeout\n"); + dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); /* try to stop the current command */ - dev_dbg(&I801_dev->dev, "Terminating the current operation\n"); - outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT); + dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); + outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, + SMBHSTCNT(priv)); msleep(1); - outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT); + outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), + SMBHSTCNT(priv)); /* Check if it worked */ - status = inb_p(SMBHSTSTS); + status = inb_p(SMBHSTSTS(priv)); if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED)) - dev_err(&I801_dev->dev, + dev_err(&priv->pci_dev->dev, "Failed terminating the transaction\n"); - outb_p(STATUS_FLAGS, SMBHSTSTS); + outb_p(STATUS_FLAGS, SMBHSTSTS(priv)); return -ETIMEDOUT; } if (status & SMBHSTSTS_FAILED) { result = -EIO; - dev_err(&I801_dev->dev, "Transaction failed\n"); + dev_err(&priv->pci_dev->dev, "Transaction failed\n"); } if (status & SMBHSTSTS_DEV_ERR) { result = -ENXIO; - dev_dbg(&I801_dev->dev, "No response\n"); + dev_dbg(&priv->pci_dev->dev, "No response\n"); } if (status & SMBHSTSTS_BUS_ERR) { result = -EAGAIN; - dev_dbg(&I801_dev->dev, "Lost arbitration\n"); + dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); } if (result) { /* Clear error flags */ - outb_p(status & STATUS_FLAGS, SMBHSTSTS); - status = inb_p(SMBHSTSTS) & STATUS_FLAGS; + outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv)); + status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; if (status) { - dev_warn(&I801_dev->dev, "Failed clearing status " + dev_warn(&priv->pci_dev->dev, "Failed clearing status " "flags at end of transaction (%02x)\n", status); } @@ -230,86 +236,88 @@ static int i801_check_post(int status, int timeout) return result; } -static int i801_transaction(int xact) +static int i801_transaction(struct i801_priv *priv, int xact) { int status; int result; int timeout = 0; - result = i801_check_pre(); + result = i801_check_pre(priv); if (result < 0) return result; /* the current contents of SMBHSTCNT can be overwritten, since PEC, * INTREN, SMBSCMD are passed in xact */ - outb_p(xact | I801_START, SMBHSTCNT); + outb_p(xact | I801_START, SMBHSTCNT(priv)); /* We will always wait for a fraction of a second! */ do { msleep(1); - status = inb_p(SMBHSTSTS); + status = inb_p(SMBHSTSTS(priv)); } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout > MAX_TIMEOUT); + result = i801_check_post(priv, status, timeout > MAX_TIMEOUT); if (result < 0) return result; - outb_p(SMBHSTSTS_INTR, SMBHSTSTS); + outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); return 0; } /* wait for INTR bit as advised by Intel */ -static void i801_wait_hwpec(void) +static void i801_wait_hwpec(struct i801_priv *priv) { int timeout = 0; int status; do { msleep(1); - status = inb_p(SMBHSTSTS); + status = inb_p(SMBHSTSTS(priv)); } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_TIMEOUT)); if (timeout > MAX_TIMEOUT) - dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); + dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n"); - outb_p(status, SMBHSTSTS); + outb_p(status, SMBHSTSTS(priv)); } -static int i801_block_transaction_by_block(union i2c_smbus_data *data, +static int i801_block_transaction_by_block(struct i801_priv *priv, + union i2c_smbus_data *data, char read_write, int hwpec) { int i, len; int status; - inb_p(SMBHSTCNT); /* reset the data buffer index */ + inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ /* Use 32-byte buffer to process this transaction */ if (read_write == I2C_SMBUS_WRITE) { len = data->block[0]; - outb_p(len, SMBHSTDAT0); + outb_p(len, SMBHSTDAT0(priv)); for (i = 0; i < len; i++) - outb_p(data->block[i+1], SMBBLKDAT); + outb_p(data->block[i+1], SMBBLKDAT(priv)); } - status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 | + status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec); if (status) return status; if (read_write == I2C_SMBUS_READ) { - len = inb_p(SMBHSTDAT0); + len = inb_p(SMBHSTDAT0(priv)); if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) return -EPROTO; data->block[0] = len; for (i = 0; i < len; i++) - data->block[i + 1] = inb_p(SMBBLKDAT); + data->block[i + 1] = inb_p(SMBBLKDAT(priv)); } return 0; } -static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, +static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, + union i2c_smbus_data *data, char read_write, int command, int hwpec) { @@ -319,15 +327,15 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, int result; int timeout; - result = i801_check_pre(); + result = i801_check_pre(priv); if (result < 0) return result; len = data->block[0]; if (read_write == I2C_SMBUS_WRITE) { - outb_p(len, SMBHSTDAT0); - outb_p(data->block[1], SMBBLKDAT); + outb_p(len, SMBHSTDAT0(priv)); + outb_p(data->block[1], SMBBLKDAT(priv)); } for (i = 1; i <= len; i++) { @@ -343,34 +351,37 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, else smbcmd = I801_BLOCK_DATA; } - outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT); + outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv)); if (i == 1) - outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT); + outb_p(inb(SMBHSTCNT(priv)) | I801_START, + SMBHSTCNT(priv)); /* We will always wait for a fraction of a second! */ timeout = 0; do { msleep(1); - status = inb_p(SMBHSTSTS); + status = inb_p(SMBHSTSTS(priv)); } while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout > MAX_TIMEOUT); + result = i801_check_post(priv, status, timeout > MAX_TIMEOUT); if (result < 0) return result; if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) { - len = inb_p(SMBHSTDAT0); + len = inb_p(SMBHSTDAT0(priv)); if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { - dev_err(&I801_dev->dev, + dev_err(&priv->pci_dev->dev, "Illegal SMBus block read size %d\n", len); /* Recover */ - while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY) - outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS); - outb_p(SMBHSTSTS_INTR, SMBHSTSTS); + while (inb_p(SMBHSTSTS(priv)) & + SMBHSTSTS_HOST_BUSY) + outb_p(SMBHSTSTS_BYTE_DONE, + SMBHSTSTS(priv)); + outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); return -EPROTO; } data->block[0] = len; @@ -378,27 +389,28 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, /* Retrieve/store value in SMBBLKDAT */ if (read_write == I2C_SMBUS_READ) - data->block[i] = inb_p(SMBBLKDAT); + data->block[i] = inb_p(SMBBLKDAT(priv)); if (read_write == I2C_SMBUS_WRITE && i+1 <= len) - outb_p(data->block[i+1], SMBBLKDAT); + outb_p(data->block[i+1], SMBBLKDAT(priv)); /* signals SMBBLKDAT ready */ - outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS); + outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv)); } return 0; } -static int i801_set_block_buffer_mode(void) +static int i801_set_block_buffer_mode(struct i801_priv *priv) { - outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL); - if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0) + outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); + if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) return -EIO; return 0; } /* Block transaction function */ -static int i801_block_transaction(union i2c_smbus_data *data, char read_write, +static int i801_block_transaction(struct i801_priv *priv, + union i2c_smbus_data *data, char read_write, int command, int hwpec) { int result = 0; @@ -407,11 +419,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, if (command == I2C_SMBUS_I2C_BLOCK_DATA) { if (read_write == I2C_SMBUS_WRITE) { /* set I2C_EN bit in configuration register */ - pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc); - pci_write_config_byte(I801_dev, SMBHSTCFG, + pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN); - } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) { - dev_err(&I801_dev->dev, + } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { + dev_err(&priv->pci_dev->dev, "I2C block read is unsupported!\n"); return -EOPNOTSUPP; } @@ -430,22 +442,23 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, /* Experience has shown that the block buffer can only be used for SMBus (not I2C) block transactions, even though the datasheet doesn't mention this limitation. */ - if ((i801_features & FEATURE_BLOCK_BUFFER) + if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA - && i801_set_block_buffer_mode() == 0) - result = i801_block_transaction_by_block(data, read_write, - hwpec); + && i801_set_block_buffer_mode(priv) == 0) + result = i801_block_transaction_by_block(priv, data, + read_write, hwpec); else - result = i801_block_transaction_byte_by_byte(data, read_write, + result = i801_block_transaction_byte_by_byte(priv, data, + read_write, command, hwpec); if (result == 0 && hwpec) - i801_wait_hwpec(); + i801_wait_hwpec(priv); if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) { /* restore saved configuration register value */ - pci_write_config_byte(I801_dev, SMBHSTCFG, hostc); + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); } return result; } @@ -458,81 +471,85 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, int hwpec; int block = 0; int ret, xact = 0; + struct i801_priv *priv = i2c_get_adapdata(adap); - hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) + hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA; switch (size) { case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); + SMBHSTADD(priv)); xact = I801_QUICK; break; case I2C_SMBUS_BYTE: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); + SMBHSTADD(priv)); if (read_write == I2C_SMBUS_WRITE) - outb_p(command, SMBHSTCMD); + outb_p(command, SMBHSTCMD(priv)); xact = I801_BYTE; break; case I2C_SMBUS_BYTE_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); - outb_p(command, SMBHSTCMD); + SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); if (read_write == I2C_SMBUS_WRITE) - outb_p(data->byte, SMBHSTDAT0); + outb_p(data->byte, SMBHSTDAT0(priv)); xact = I801_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); - outb_p(command, SMBHSTCMD); + SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); if (read_write == I2C_SMBUS_WRITE) { - outb_p(data->word & 0xff, SMBHSTDAT0); - outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + outb_p(data->word & 0xff, SMBHSTDAT0(priv)); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); } xact = I801_WORD_DATA; break; case I2C_SMBUS_BLOCK_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); - outb_p(command, SMBHSTCMD); + SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); block = 1; break; case I2C_SMBUS_I2C_BLOCK_DATA: /* NB: page 240 of ICH5 datasheet shows that the R/#W * bit should be cleared here, even when reading */ - outb_p((addr & 0x7f) << 1, SMBHSTADD); + outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); if (read_write == I2C_SMBUS_READ) { /* NB: page 240 of ICH5 datasheet also shows * that DATA1 is the cmd field when reading */ - outb_p(command, SMBHSTDAT1); + outb_p(command, SMBHSTDAT1(priv)); } else - outb_p(command, SMBHSTCMD); + outb_p(command, SMBHSTCMD(priv)); block = 1; break; default: - dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size); + dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n", + size); return -EOPNOTSUPP; } if (hwpec) /* enable/disable hardware PEC */ - outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL); + outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); else - outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL); + outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), + SMBAUXCTL(priv)); if (block) - ret = i801_block_transaction(data, read_write, size, hwpec); + ret = i801_block_transaction(priv, data, read_write, size, + hwpec); else - ret = i801_transaction(xact | ENABLE_INT9); + ret = i801_transaction(priv, xact | ENABLE_INT9); /* Some BIOSes don't like it when PEC is enabled at reboot or resume time, so we forcibly disable it after every transaction. Turn off E32B for the same reason. */ if (hwpec || block) - outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), - SMBAUXCTL); + outb_p(inb_p(SMBAUXCTL(priv)) & + ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); if (block) return ret; @@ -544,10 +561,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, switch (xact & 0x7f) { case I801_BYTE: /* Result put in SMBHSTDAT0 */ case I801_BYTE_DATA: - data->byte = inb_p(SMBHSTDAT0); + data->byte = inb_p(SMBHSTDAT0(priv)); break; case I801_WORD_DATA: - data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + data->word = inb_p(SMBHSTDAT0(priv)) + + (inb_p(SMBHSTDAT1(priv)) << 8); break; } return 0; @@ -556,11 +574,13 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, static u32 i801_func(struct i2c_adapter *adapter) { + struct i801_priv *priv = i2c_get_adapdata(adapter); + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | - ((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | - ((i801_features & FEATURE_I2C_BLOCK_READ) ? + ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | + ((priv->features & FEATURE_I2C_BLOCK_READ) ? I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0); } @@ -569,12 +589,6 @@ static const struct i2c_algorithm smbus_algorithm = { .functionality = i801_func, }; -static struct i2c_adapter i801_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .algo = &smbus_algorithm, -}; - static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) }, @@ -706,16 +720,25 @@ static int __devinit i801_probe(struct pci_dev *dev, { unsigned char temp; int err, i; + struct i801_priv *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + i2c_set_adapdata(&priv->adapter, priv); + priv->adapter.owner = THIS_MODULE; + priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + priv->adapter.algo = &smbus_algorithm; - I801_dev = dev; - i801_features = 0; + priv->pci_dev = dev; switch (dev->device) { default: - i801_features |= FEATURE_I2C_BLOCK_READ; + priv->features |= FEATURE_I2C_BLOCK_READ; /* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3: - i801_features |= FEATURE_SMBUS_PEC; - i801_features |= FEATURE_BLOCK_BUFFER; + priv->features |= FEATURE_SMBUS_PEC; + priv->features |= FEATURE_BLOCK_BUFFER; /* fall through */ case PCI_DEVICE_ID_INTEL_82801CA_3: case PCI_DEVICE_ID_INTEL_82801BA_2: @@ -726,11 +749,11 @@ static int __devinit i801_probe(struct pci_dev *dev, /* Disable features on user request */ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { - if (i801_features & disable_features & (1 << i)) + if (priv->features & disable_features & (1 << i)) dev_notice(&dev->dev, "%s disabled by user\n", i801_feature_names[i]); } - i801_features &= ~disable_features; + priv->features &= ~disable_features; err = pci_enable_device(dev); if (err) { @@ -740,8 +763,8 @@ static int __devinit i801_probe(struct pci_dev *dev, } /* Determine the address of the SMBus area */ - i801_smba = pci_resource_start(dev, SMBBAR); - if (!i801_smba) { + priv->smba = pci_resource_start(dev, SMBBAR); + if (!priv->smba) { dev_err(&dev->dev, "SMBus base address uninitialized, " "upgrade BIOS\n"); err = -ENODEV; @@ -757,19 +780,19 @@ static int __devinit i801_probe(struct pci_dev *dev, err = pci_request_region(dev, SMBBAR, i801_driver.name); if (err) { dev_err(&dev->dev, "Failed to request SMBus region " - "0x%lx-0x%Lx\n", i801_smba, + "0x%lx-0x%Lx\n", priv->smba, (unsigned long long)pci_resource_end(dev, SMBBAR)); goto exit; } - pci_read_config_byte(I801_dev, SMBHSTCFG, &temp); - i801_original_hstcfg = temp; + pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp); + priv->original_hstcfg = temp; temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ if (!(temp & SMBHSTCFG_HST_EN)) { dev_info(&dev->dev, "Enabling SMBus device\n"); temp |= SMBHSTCFG_HST_EN; } - pci_write_config_byte(I801_dev, SMBHSTCFG, temp); + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); if (temp & SMBHSTCFG_SMB_SMI_EN) dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); @@ -777,19 +800,19 @@ static int __devinit i801_probe(struct pci_dev *dev, dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); /* Clear special mode bits */ - if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) - outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), - SMBAUXCTL); + if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) + outb_p(inb_p(SMBAUXCTL(priv)) & + ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); /* set up the sysfs linkage to our parent device */ - i801_adapter.dev.parent = &dev->dev; + priv->adapter.dev.parent = &dev->dev; /* Retry up to 3 times on lost arbitration */ - i801_adapter.retries = 3; + priv->adapter.retries = 3; - snprintf(i801_adapter.name, sizeof(i801_adapter.name), - "SMBus I801 adapter at %04lx", i801_smba); - err = i2c_add_adapter(&i801_adapter); + snprintf(priv->adapter.name, sizeof(priv->adapter.name), + "SMBus I801 adapter at %04lx", priv->smba); + err = i2c_add_adapter(&priv->adapter); if (err) { dev_err(&dev->dev, "Failed to add SMBus adapter\n"); goto exit_release; @@ -803,27 +826,33 @@ static int __devinit i801_probe(struct pci_dev *dev, memset(&info, 0, sizeof(struct i2c_board_info)); info.addr = apanel_addr; strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE); - i2c_new_device(&i801_adapter, &info); + i2c_new_device(&priv->adapter, &info); } #endif #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE if (dmi_name_in_vendors("FUJITSU")) - dmi_walk(dmi_check_onboard_devices, &i801_adapter); + dmi_walk(dmi_check_onboard_devices, &priv->adapter); #endif + pci_set_drvdata(dev, priv); return 0; exit_release: pci_release_region(dev, SMBBAR); exit: + kfree(priv); return err; } static void __devexit i801_remove(struct pci_dev *dev) { - i2c_del_adapter(&i801_adapter); - pci_write_config_byte(I801_dev, SMBHSTCFG, i801_original_hstcfg); + struct i801_priv *priv = pci_get_drvdata(dev); + + i2c_del_adapter(&priv->adapter); + pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); pci_release_region(dev, SMBBAR); + pci_set_drvdata(dev, NULL); + kfree(priv); /* * do not call pci_disable_device(dev) since it can cause hard hangs on * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) @@ -833,8 +862,10 @@ static void __devexit i801_remove(struct pci_dev *dev) #ifdef CONFIG_PM static int i801_suspend(struct pci_dev *dev, pm_message_t mesg) { + struct i801_priv *priv = pci_get_drvdata(dev); + pci_save_state(dev); - pci_write_config_byte(dev, SMBHSTCFG, i801_original_hstcfg); + pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); pci_set_power_state(dev, pci_choose_state(dev, mesg)); return 0; } -- cgit v1.2.3