From e89c0e4377303a101d1032bf1dde822218372f15 Mon Sep 17 00:00:00 2001
From: David Brown <davidb@codeaurora.org>
Date: Thu, 12 Apr 2012 11:36:50 -0700
Subject: video: msm: Fix section mismatches in mddi.c

The change
    commit 461cbe77d0a4f887c33a3a95ea68a7daf23b4302
    Author: Gregory Bean <gbean@codeaurora.org>
    Date:   Wed Jul 28 10:22:13 2010 -0700

        video: msm: Fix section mismatch in mddi.c.

fixes a section mismatch between the board file and the driver's probe
function, however, it misses the additional mismatches between the
probe function and some routines it calls.  Fix these up as well.

Signed-off-by: David Brown <davidb@codeaurora.org>
---
 drivers/video/msm/mddi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c
index 4527cbf0a4ec..b061d709bc44 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/msm/mddi.c
@@ -420,7 +420,7 @@ static void mddi_resume(struct msm_mddi_client_data *cdata)
 	mddi_set_auto_hibernate(&mddi->client_data, 1);
 }
 
-static int __init mddi_get_client_caps(struct mddi_info *mddi)
+static int __devinit mddi_get_client_caps(struct mddi_info *mddi)
 {
 	int i, j;
 
@@ -622,9 +622,9 @@ uint32_t mddi_remote_read(struct msm_mddi_client_data *cdata, uint32_t reg)
 
 static struct mddi_info mddi_info[2];
 
-static int __init mddi_clk_setup(struct platform_device *pdev,
-				 struct mddi_info *mddi,
-				 unsigned long clk_rate)
+static int __devinit mddi_clk_setup(struct platform_device *pdev,
+				    struct mddi_info *mddi,
+				    unsigned long clk_rate)
 {
 	int ret;
 
-- 
cgit v1.2.3


From a8081d317978416197295df22fc2ea71e4812f50 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 8 Mar 2012 12:52:38 +0200
Subject: OMAPDSS: Ensure OPP100 when DSS is operational

Most of the DSS clocks have restrictions on their frequency based on the
OPP in use. For example, maximum frequency for a clock may be 180MHz in
OPP100, but 90MHz in OPP50. This means that when a high enough pixel
clock or function clock is required, we need to use OPP100.

However, there's currently no way in the PM framework to make that kind
of request. The closest we get is to ask for very high bus throughput
from the PM framework, which should effectively force OPP100.

This patch is a simple version for handling the problem. Instead of
asking for OPP100 only when needed, this patch asks for OPP100 whenever
DSS is active. This obviously is not an optimal solution for cases with
small displays where OPP50 would work just fine. However, a proper
solution is a complex one, and this patch is a short term solution for
the problem.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Kevin Hilman <khilman@ti.com>
---
 drivers/video/omap2/dss/core.c | 10 ++++++++++
 drivers/video/omap2/dss/dss.c  | 13 +++++++++++++
 drivers/video/omap2/dss/dss.h  |  1 +
 3 files changed, 24 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index e8a120771ac6..5ad8cc798235 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -87,6 +87,16 @@ struct regulator *dss_get_vdds_sdi(void)
 	return reg;
 }
 
+int dss_set_min_bus_tput(struct device *dev, unsigned long tput)
+{
+	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
+
+	if (pdata->set_min_bus_tput)
+		return pdata->set_min_bus_tput(dev, tput);
+	else
+		return 0;
+}
+
 #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
 static int dss_debug_show(struct seq_file *s, void *unused)
 {
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index bd2d5e159463..e731aa46eeaf 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -829,11 +829,24 @@ static int omap_dsshw_remove(struct platform_device *pdev)
 static int dss_runtime_suspend(struct device *dev)
 {
 	dss_save_context();
+	dss_set_min_bus_tput(dev, 0);
 	return 0;
 }
 
 static int dss_runtime_resume(struct device *dev)
 {
+	int r;
+	/*
+	 * Set an arbitrarily high tput request to ensure OPP100.
+	 * What we should really do is to make a request to stay in OPP100,
+	 * without any tput requirements, but that is not currently possible
+	 * via the PM layer.
+	 */
+
+	r = dss_set_min_bus_tput(dev, 1000000000);
+	if (r)
+		return r;
+
 	dss_restore_context();
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d4b3dff2ead3..42f8f62cf3d4 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -162,6 +162,7 @@ struct platform_device;
 struct bus_type *dss_get_bus(void);
 struct regulator *dss_get_vdds_dsi(void);
 struct regulator *dss_get_vdds_sdi(void);
+int dss_set_min_bus_tput(struct device *dev, unsigned long tput);
 
 /* apply */
 void dss_apply_init(void);
-- 
cgit v1.2.3


From b6e695abe710ee1ae248463d325169efac487e17 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 15 Mar 2012 15:22:58 +0200
Subject: OMAPDSS: DSI: remove option to use pck for DSI PLL clkin

For some OMAP versions the TRM says that the pixel clock from DISPC can
be used as an input clock for DSI PLL, instead of the default, which is
sysclk.  For some OMAP versions the bits affecting this are marked as
reserved.  This feature has never been tested, so it's unknown if the HW
even works, and has never been used.

To clean things up, this patch removes the functionality. This should
not affect any board.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 57 +++++++++----------------------------------
 drivers/video/omap2/dss/dss.h |  3 ---
 2 files changed, 12 insertions(+), 48 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 662d14f8c2c3..0d2c53f4271b 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1279,10 +1279,9 @@ static int dsi_pll_power(struct platform_device *dsidev,
 }
 
 /* calculate clock rates using dividers in cinfo */
-static int dsi_calc_clock_rates(struct omap_dss_device *dssdev,
+static int dsi_calc_clock_rates(struct platform_device *dsidev,
 		struct dsi_clock_info *cinfo)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
 	if (cinfo->regn == 0 || cinfo->regn > dsi->regn_max)
@@ -1297,21 +1296,8 @@ static int dsi_calc_clock_rates(struct omap_dss_device *dssdev,
 	if (cinfo->regm_dsi > dsi->regm_dsi_max)
 		return -EINVAL;
 
-	if (cinfo->use_sys_clk) {
-		cinfo->clkin = clk_get_rate(dsi->sys_clk);
-		/* XXX it is unclear if highfreq should be used
-		 * with DSS_SYS_CLK source also */
-		cinfo->highfreq = 0;
-	} else {
-		cinfo->clkin = dispc_mgr_pclk_rate(dssdev->manager->id);
-
-		if (cinfo->clkin < 32000000)
-			cinfo->highfreq = 0;
-		else
-			cinfo->highfreq = 1;
-	}
-
-	cinfo->fint = cinfo->clkin / (cinfo->regn * (cinfo->highfreq ? 2 : 1));
+	cinfo->clkin = clk_get_rate(dsi->sys_clk);
+	cinfo->fint = cinfo->clkin / cinfo->regn;
 
 	if (cinfo->fint > dsi->fint_max || cinfo->fint < dsi->fint_min)
 		return -EINVAL;
@@ -1378,27 +1364,21 @@ retry:
 
 	memset(&cur, 0, sizeof(cur));
 	cur.clkin = dss_sys_clk;
-	cur.use_sys_clk = 1;
-	cur.highfreq = 0;
 
-	/* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */
-	/* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */
+	/* 0.75MHz < Fint = clkin / regn < 2.1MHz */
 	/* To reduce PLL lock time, keep Fint high (around 2 MHz) */
 	for (cur.regn = 1; cur.regn < dsi->regn_max; ++cur.regn) {
-		if (cur.highfreq == 0)
-			cur.fint = cur.clkin / cur.regn;
-		else
-			cur.fint = cur.clkin / (2 * cur.regn);
+		cur.fint = cur.clkin / cur.regn;
 
 		if (cur.fint > dsi->fint_max || cur.fint < dsi->fint_min)
 			continue;
 
-		/* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */
+		/* DSIPHY(MHz) = (2 * regm / regn) * clkin */
 		for (cur.regm = 1; cur.regm < dsi->regm_max; ++cur.regm) {
 			unsigned long a, b;
 
 			a = 2 * cur.regm * (cur.clkin/1000);
-			b = cur.regn * (cur.highfreq + 1);
+			b = cur.regn;
 			cur.clkin4ddr = a / b * 1000;
 
 			if (cur.clkin4ddr > 1800 * 1000 * 1000)
@@ -1486,9 +1466,7 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
 
 	DSSDBGF();
 
-	dsi->current_cinfo.use_sys_clk = cinfo->use_sys_clk;
-	dsi->current_cinfo.highfreq = cinfo->highfreq;
-
+	dsi->current_cinfo.clkin = cinfo->clkin;
 	dsi->current_cinfo.fint = cinfo->fint;
 	dsi->current_cinfo.clkin4ddr = cinfo->clkin4ddr;
 	dsi->current_cinfo.dsi_pll_hsdiv_dispc_clk =
@@ -1503,17 +1481,13 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
 
 	DSSDBG("DSI Fint %ld\n", cinfo->fint);
 
-	DSSDBG("clkin (%s) rate %ld, highfreq %d\n",
-			cinfo->use_sys_clk ? "dss_sys_clk" : "pclkfree",
-			cinfo->clkin,
-			cinfo->highfreq);
+	DSSDBG("clkin rate %ld\n", cinfo->clkin);
 
 	/* DSIPHY == CLKIN4DDR */
-	DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu / %d = %lu\n",
+	DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu = %lu\n",
 			cinfo->regm,
 			cinfo->regn,
 			cinfo->clkin,
-			cinfo->highfreq + 1,
 			cinfo->clkin4ddr);
 
 	DSSDBG("Data rate on 1 DSI lane %ld Mbps\n",
@@ -1568,10 +1542,6 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
 
 	if (dss_has_feature(FEAT_DSI_PLL_FREQSEL))
 		l = FLD_MOD(l, f, 4, 1);	/* DSI_PLL_FREQSEL */
-	l = FLD_MOD(l, cinfo->use_sys_clk ? 0 : 1,
-			11, 11);		/* DSI_PLL_CLKSEL */
-	l = FLD_MOD(l, cinfo->highfreq,
-			12, 12);		/* DSI_PLL_HIGHFREQ */
 	l = FLD_MOD(l, 1, 13, 13);		/* DSI_PLL_REFEN */
 	l = FLD_MOD(l, 0, 14, 14);		/* DSIPHY_CLKINEN */
 	l = FLD_MOD(l, 1, 20, 20);		/* DSI_HSDIVBYPASS */
@@ -1726,8 +1696,7 @@ static void dsi_dump_dsidev_clocks(struct platform_device *dsidev,
 
 	seq_printf(s,	"- DSI%d PLL -\n", dsi_module + 1);
 
-	seq_printf(s,	"dsi pll source = %s\n",
-			cinfo->use_sys_clk ? "dss_sys_clk" : "pclkfree");
+	seq_printf(s,	"dsi pll clkin\t%lu\n", cinfo->clkin);
 
 	seq_printf(s,	"Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn);
 
@@ -4285,13 +4254,11 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
 	struct dsi_clock_info cinfo;
 	int r;
 
-	/* we always use DSS_CLK_SYSCK as input clock */
-	cinfo.use_sys_clk = true;
 	cinfo.regn  = dssdev->clocks.dsi.regn;
 	cinfo.regm  = dssdev->clocks.dsi.regm;
 	cinfo.regm_dispc = dssdev->clocks.dsi.regm_dispc;
 	cinfo.regm_dsi = dssdev->clocks.dsi.regm_dsi;
-	r = dsi_calc_clock_rates(dssdev, &cinfo);
+	r = dsi_calc_clock_rates(dsidev, &cinfo);
 	if (r) {
 		DSSERR("Failed to calc dsi clocks\n");
 		return r;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 42f8f62cf3d4..7080f5f04c07 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -150,9 +150,6 @@ struct dsi_clock_info {
 	u16 regm_dsi;	/* OMAP3: REGM4
 			 * OMAP4: REGM5 */
 	u16 lp_clk_div;
-
-	u8 highfreq;
-	bool use_sys_clk;
 };
 
 struct seq_file;
-- 
cgit v1.2.3


From 9c3d5eb71b1fdcdef434a46444d931ada6938446 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 19 Mar 2012 14:50:46 +0000
Subject: OMAP: DSS2: Remove suspicous and unused TAAL regulator API usage

The TAAL driver contains some regulator support which is currently unused
(the code is there but the one panel supported by the driver doesn't have
any regulators provided). This code mostly looks like an open coded
version of the regulator core bulk API.

The only additional feature is that a voltage range can be set once when
the device is opened, though this is never varied at runtime. The general
expectation is that if the device is not actively managing the voltage of
the device (eg, doing DVFS) then any configuration will be done using the
constraints rather than by drivers, saving them code and ensuring that
they work well with systems where the voltage is not configurable.

If systems are added needing regulator support this can be added back in,
though it should be based on core features rather than open coding things.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c | 80 -------------------------------
 1 file changed, 80 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 0f21fa5a16ae..72d63076ab19 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -30,7 +30,6 @@
 #include <linux/gpio.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
-#include <linux/regulator/consumer.h>
 #include <linux/mutex.h>
 
 #include <video/omapdss.h>
@@ -55,73 +54,6 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
 
 static int taal_panel_reset(struct omap_dss_device *dssdev);
 
-struct panel_regulator {
-	struct regulator *regulator;
-	const char *name;
-	int min_uV;
-	int max_uV;
-};
-
-static void free_regulators(struct panel_regulator *regulators, int n)
-{
-	int i;
-
-	for (i = 0; i < n; i++) {
-		/* disable/put in reverse order */
-		regulator_disable(regulators[n - i - 1].regulator);
-		regulator_put(regulators[n - i - 1].regulator);
-	}
-}
-
-static int init_regulators(struct omap_dss_device *dssdev,
-			struct panel_regulator *regulators, int n)
-{
-	int r, i, v;
-
-	for (i = 0; i < n; i++) {
-		struct regulator *reg;
-
-		reg = regulator_get(&dssdev->dev, regulators[i].name);
-		if (IS_ERR(reg)) {
-			dev_err(&dssdev->dev, "failed to get regulator %s\n",
-				regulators[i].name);
-			r = PTR_ERR(reg);
-			goto err;
-		}
-
-		/* FIXME: better handling of fixed vs. variable regulators */
-		v = regulator_get_voltage(reg);
-		if (v < regulators[i].min_uV || v > regulators[i].max_uV) {
-			r = regulator_set_voltage(reg, regulators[i].min_uV,
-						regulators[i].max_uV);
-			if (r) {
-				dev_err(&dssdev->dev,
-					"failed to set regulator %s voltage\n",
-					regulators[i].name);
-				regulator_put(reg);
-				goto err;
-			}
-		}
-
-		r = regulator_enable(reg);
-		if (r) {
-			dev_err(&dssdev->dev, "failed to enable regulator %s\n",
-				regulators[i].name);
-			regulator_put(reg);
-			goto err;
-		}
-
-		regulators[i].regulator = reg;
-	}
-
-	return 0;
-
-err:
-	free_regulators(regulators, i);
-
-	return r;
-}
-
 /**
  * struct panel_config - panel configuration
  * @name: panel name
@@ -150,8 +82,6 @@ struct panel_config {
 		unsigned int low;
 	} reset_sequence;
 
-	struct panel_regulator *regulators;
-	int num_regulators;
 };
 
 enum {
@@ -977,11 +907,6 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	atomic_set(&td->do_update, 0);
 
-	r = init_regulators(dssdev, panel_config->regulators,
-			panel_config->num_regulators);
-	if (r)
-		goto err_reg;
-
 	td->workqueue = create_singlethread_workqueue("taal_esd");
 	if (td->workqueue == NULL) {
 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
@@ -1075,8 +1000,6 @@ err_gpio:
 err_bl:
 	destroy_workqueue(td->workqueue);
 err_wq:
-	free_regulators(panel_config->regulators, panel_config->num_regulators);
-err_reg:
 	kfree(td);
 err:
 	return r;
@@ -1113,9 +1036,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 	/* reset, to be sure that the panel is in a valid state */
 	taal_hw_reset(dssdev);
 
-	free_regulators(td->panel_config->regulators,
-			td->panel_config->num_regulators);
-
 	kfree(td);
 }
 
-- 
cgit v1.2.3


From ec8741078d0a644d68827c8a347ac6be153622b5 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 19 Mar 2012 14:56:39 +0000
Subject: OMAPDSS: VENC: Check for errors from regulator_enable()

It is possible for regulator_enable() to fail and if it does fail that's
generally a bad sign for anything we try to do with the hardware afterwards
so check for and immediately return an error if regulator_enable() fails.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/venc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 9c3daf71750c..abfbd4ac3e22 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -443,7 +443,9 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 	dispc_set_digit_size(dssdev->panel.timings.x_res,
 			dssdev->panel.timings.y_res/2);
 
-	regulator_enable(venc.vdda_dac_reg);
+	r = regulator_enable(venc.vdda_dac_reg);
+	if (r)
+		goto err;
 
 	if (dssdev->platform_enable)
 		dssdev->platform_enable(dssdev);
-- 
cgit v1.2.3


From 956107eadc27ffbcdf80357e16138f9595f0f4fd Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 19 Mar 2012 15:02:31 +0000
Subject: OMAPDSS: TPO-TD03MTEA1: Check for errors from regulator_enable()

It is possible for regulator_enable() to fail and if it does fail that's
generally a bad sign for anything we try to do with the hardware afterwards
so check for and immediately return an error if regulator_enable() fails.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index 32f3fcd7f0f0..74c6b873932b 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -272,11 +272,14 @@ static const struct omap_video_timings tpo_td043_timings = {
 static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
 {
 	int nreset_gpio = tpo_td043->nreset_gpio;
+	int r;
 
 	if (tpo_td043->powered_on)
 		return 0;
 
-	regulator_enable(tpo_td043->vcc_reg);
+	r = regulator_enable(tpo_td043->vcc_reg);
+	if (r != 0)
+		return r;
 
 	/* wait for regulator to stabilize */
 	msleep(160);
-- 
cgit v1.2.3


From 2c83af49ca83ebf521f9360baaca3718bb5d303e Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 19 Mar 2012 15:02:32 +0000
Subject: OMAPDSS: TPO-TD03MTEA1: Correct comment for power on delay

Since any power on stabilisation delay for the supply itself should be
taken care of transparently by the regulator API when the regulator is
enabled the additional delay that the TPO-TD03MTEA1 driver adds after
that returned should be due to the requirements of the device itself
rather than the supply (the delay is also suspicously long for one for
a regulator to ramp). Correct the comment to avoid misleading people
taking this code as a reference.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index 74c6b873932b..987cb8404c3e 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -281,7 +281,7 @@ static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
 	if (r != 0)
 		return r;
 
-	/* wait for regulator to stabilize */
+	/* wait for panel to stabilize */
 	msleep(160);
 
 	if (gpio_is_valid(nreset_gpio))
-- 
cgit v1.2.3


From f3fb3bbc7f71d573be40213af4a90751a81b2379 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Fri, 9 Mar 2012 02:42:49 +0200
Subject: OMAPDSS: OMAPFB: check for matching memory size early

If the size of memory region that is being set up is the same as before,
we don't have to do memory and layer busy checks.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-ioctl.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 6a09ef87e14f..27a85813c600 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -225,6 +225,9 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	down_write_nested(&rg->lock, rg->id);
 	atomic_inc(&rg->lock_count);
 
+	if (rg->size == size && rg->type == mi->type)
+		goto out;
+
 	if (atomic_read(&rg->map_count)) {
 		r = -EBUSY;
 		goto out;
@@ -247,12 +250,10 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 		}
 	}
 
-	if (rg->size != size || rg->type != mi->type) {
-		r = omapfb_realloc_fbmem(fbi, size, mi->type);
-		if (r) {
-			dev_err(fbdev->dev, "realloc fbmem failed\n");
-			goto out;
-		}
+	r = omapfb_realloc_fbmem(fbi, size, mi->type);
+	if (r) {
+		dev_err(fbdev->dev, "realloc fbmem failed\n");
+		goto out;
 	}
 
  out:
-- 
cgit v1.2.3


From 4b6430fc98cfe051eab69f4696a608bba14ebd6c Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Thu, 15 Mar 2012 20:00:23 +0200
Subject: OMAPDSS: provide default get_timings function for panels

With this we can eliminate some duplicate code in panel drivers.
Also lgphilips-lb035q02, nec-nl8048hl11-01b, picodlp and
tpo-td043mtea1 gain support of reading timings over sysfs.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-acx565akm.c   | 7 -------
 drivers/video/omap2/displays/panel-generic-dpi.c | 7 -------
 drivers/video/omap2/displays/panel-n8x0.c        | 8 --------
 drivers/video/omap2/displays/panel-taal.c        | 8 --------
 drivers/video/omap2/dss/core.c                   | 2 ++
 drivers/video/omap2/dss/display.c                | 7 +++++++
 drivers/video/omap2/dss/venc.c                   | 7 -------
 7 files changed, 9 insertions(+), 37 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index d26f37ac69d8..c98f2c16f744 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -738,12 +738,6 @@ static void acx_panel_set_timings(struct omap_dss_device *dssdev,
 	}
 }
 
-static void acx_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static int acx_panel_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
@@ -761,7 +755,6 @@ static struct omap_dss_driver acx_panel_driver = {
 	.resume		= acx_panel_resume,
 
 	.set_timings	= acx_panel_set_timings,
-	.get_timings	= acx_panel_get_timings,
 	.check_timings	= acx_panel_check_timings,
 
 	.get_recommended_bpp = acx_get_recommended_bpp,
diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 30fe4dfeb227..e2b21c511fcf 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -549,12 +549,6 @@ static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
 	dpi_set_timings(dssdev, timings);
 }
 
-static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
@@ -571,7 +565,6 @@ static struct omap_dss_driver dpi_driver = {
 	.resume		= generic_dpi_panel_resume,
 
 	.set_timings	= generic_dpi_panel_set_timings,
-	.get_timings	= generic_dpi_panel_get_timings,
 	.check_timings	= generic_dpi_panel_check_timings,
 
 	.driver         = {
diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index dc9408dc93d1..4a34cdc1371b 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -610,12 +610,6 @@ static int n8x0_panel_resume(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void n8x0_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static void n8x0_panel_get_resolution(struct omap_dss_device *dssdev,
 		u16 *xres, u16 *yres)
 {
@@ -678,8 +672,6 @@ static struct omap_dss_driver n8x0_panel_driver = {
 	.get_resolution	= n8x0_panel_get_resolution,
 	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
 
-	.get_timings	= n8x0_panel_get_timings,
-
 	.driver         = {
 		.name   = "n8x0_panel",
 		.owner  = THIS_MODULE,
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 72d63076ab19..3053399faf9a 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -507,12 +507,6 @@ static const struct backlight_ops taal_bl_ops = {
 	.update_status  = taal_bl_update_status,
 };
 
-static void taal_get_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static void taal_get_resolution(struct omap_dss_device *dssdev,
 		u16 *xres, u16 *yres)
 {
@@ -1807,8 +1801,6 @@ static struct omap_dss_driver taal_driver = {
 	.run_test	= taal_run_test,
 	.memory_read	= taal_memory_read,
 
-	.get_timings	= taal_get_timings,
-
 	.driver         = {
 		.name   = "taal",
 		.owner  = THIS_MODULE,
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 5ad8cc798235..64cb8aa49b26 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -391,6 +391,8 @@ int omap_dss_register_driver(struct omap_dss_driver *dssdriver)
 	if (dssdriver->get_recommended_bpp == NULL)
 		dssdriver->get_recommended_bpp =
 			omapdss_default_get_recommended_bpp;
+	if (dssdriver->get_timings == NULL)
+		dssdriver->get_timings = omapdss_default_get_timings;
 
 	return driver_register(&dssdriver->driver);
 }
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 4424c198dbcd..e688d10f061a 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -308,6 +308,13 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
 }
 EXPORT_SYMBOL(omapdss_default_get_recommended_bpp);
 
+void omapdss_default_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+EXPORT_SYMBOL(omapdss_default_get_timings);
+
 /* Checks if replication logic should be used. Only use for active matrix,
  * when overlay is in RGB12U or RGB16 mode, and LCD interface is
  * 18bpp or 24bpp */
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index abfbd4ac3e22..13a20da8ea91 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -579,12 +579,6 @@ static int venc_panel_resume(struct omap_dss_device *dssdev)
 	return venc_panel_enable(dssdev);
 }
 
-static void venc_get_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static void venc_set_timings(struct omap_dss_device *dssdev,
 			struct omap_video_timings *timings)
 {
@@ -663,7 +657,6 @@ static struct omap_dss_driver venc_driver = {
 	.get_resolution	= omapdss_default_get_resolution,
 	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
 
-	.get_timings	= venc_get_timings,
 	.set_timings	= venc_set_timings,
 	.check_timings	= venc_check_timings,
 
-- 
cgit v1.2.3


From 31e8dfe14871f08d335e6884cb2b96f2679c1ebe Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Thu, 15 Mar 2012 20:00:24 +0200
Subject: OMAPDSS: TPO-TD03MTEA1: add set/check timing functions

On pandora we use .set_timings to alter refresh rate,
so add .check_timings/.set_timings functions.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index 987cb8404c3e..4b6448b3c31f 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -473,6 +473,18 @@ static void tpo_td043_remove(struct omap_dss_device *dssdev)
 		gpio_free(nreset_gpio);
 }
 
+static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	dpi_set_timings(dssdev, timings);
+}
+
+static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	return dpi_check_timings(dssdev, timings);
+}
+
 static struct omap_dss_driver tpo_td043_driver = {
 	.probe		= tpo_td043_probe,
 	.remove		= tpo_td043_remove,
@@ -484,6 +496,9 @@ static struct omap_dss_driver tpo_td043_driver = {
 	.set_mirror	= tpo_td043_set_hmirror,
 	.get_mirror	= tpo_td043_get_hmirror,
 
+	.set_timings	= tpo_td043_set_timings,
+	.check_timings	= tpo_td043_check_timings,
+
 	.driver         = {
 		.name	= "tpo_td043mtea1_panel",
 		.owner  = THIS_MODULE,
-- 
cgit v1.2.3


From 697bacbaea2aab955b4afa6f6c0c799e44f426fa Mon Sep 17 00:00:00 2001
From: Thomas Weber <weber@corscience.de>
Date: Fri, 17 Feb 2012 13:41:58 +0100
Subject: OMAPDSS: Add Mitsubishi AA084SB01 display support

This patch adds support for the Mitsubishi display
AA084SB01. This is a 7 inch LVDS display. It is tested with
an OMAP3 board.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index e2b21c511fcf..00f324a7a68b 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -386,6 +386,25 @@ static struct panel_config generic_dpi_panels[] = {
 
 		.name			= "innolux_at080tn52",
 	},
+
+	/* Mitsubishi AA084SB01 */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 600,
+			.pixel_clock	= 40000,
+
+			.hsw		= 1,
+			.hfp		= 254,
+			.hbp		= 1,
+
+			.vsw		= 1,
+			.vfp		= 26,
+			.vbp		= 1,
+		},
+		.config			= OMAP_DSS_LCD_TFT,
+		.name			= "mitsubishi_aa084sb01",
+	},
 };
 
 struct panel_drv_data {
-- 
cgit v1.2.3


From e97374c0fe770ea9fde0a3061c552dc674ad3c5a Mon Sep 17 00:00:00 2001
From: Thomas Weber <weber@corscience.de>
Date: Fri, 17 Feb 2012 13:41:59 +0100
Subject: OMAPDSS: Add EDT ET0500G0DH6 display support

The EDT ET0500G0DH6 is a 5 inch display. It is
tested on an OMAP3 board.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 00f324a7a68b..89d36237cd51 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -405,6 +405,24 @@ static struct panel_config generic_dpi_panels[] = {
 		.config			= OMAP_DSS_LCD_TFT,
 		.name			= "mitsubishi_aa084sb01",
 	},
+	/* EDT ET0500G0DH6 */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 480,
+			.pixel_clock	= 33260,
+
+			.hsw		= 128,
+			.hfp		= 216,
+			.hbp		= 40,
+
+			.vsw		= 2,
+			.vfp		= 35,
+			.vbp		= 10,
+		},
+		.config			= OMAP_DSS_LCD_TFT,
+		.name			= "edt_et0500g0dh6",
+	},
 };
 
 struct panel_drv_data {
-- 
cgit v1.2.3


From 693cc078dc8b89d20a0d7d32f1a32d03a4fc1e7f Mon Sep 17 00:00:00 2001
From: Peter Meerwald <p.meerwald@bct-electronic.com>
Date: Tue, 3 Apr 2012 10:59:15 +0200
Subject: OMAPFB: remove unused FB_OMAP_BOOTLOADER_INIT config option

code depending on FB_OMAP_BOOTLOADER_INIT has been removed long before
(e.g. Tomi Valkeinen, 03 Mar 2011: OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT
support), but the option still exists Kconfig and has no use

Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/Kconfig | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 1e7536d9a8fc..b48f95f0dfe2 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -39,14 +39,6 @@ config FB_OMAP_LCD_MIPID
 	  the Mobile Industry Processor Interface DBI-C/DCS
 	  specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
 
-config FB_OMAP_BOOTLOADER_INIT
-	bool "Check bootloader initialization"
-	depends on FB_OMAP
-	help
-	  Say Y here if you want to enable checking if the bootloader has
-	  already initialized the display controller. In this case the
-	  driver will skip the initialization.
-
 config FB_OMAP_CONSISTENT_DMA_SIZE
 	int "Consistent DMA memory size (MB)"
 	depends on FB_OMAP
-- 
cgit v1.2.3


From e5c09e06a9ef882e770aa1fa1bcfd5e5c90c6519 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 16 Apr 2012 12:53:42 +0530
Subject: OMAPDSS: DISPC/RFBI: Use dispc_mgr_set_lcd_timings() for setting lcd
 size

The RFBI driver uses dispc_mgr_set_lcd_size() to set the width and height of
the LCD manager. Replace this to use dispc_mgr_set_lcd_timings(), pass dummy
blanking parameters like done in the DSI driver.

This prevents the need to export dispc_mgr_set_lcd_size(), and use a common
function to set lcd timings.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c |  3 ++-
 drivers/video/omap2/dss/dss.h   |  1 -
 drivers/video/omap2/dss/rfbi.c  | 24 ++++++++++++++++++++++--
 3 files changed, 24 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index ee30937482e1..ac9bf750e774 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -983,7 +983,8 @@ static void dispc_ovl_enable_replication(enum omap_plane plane, bool enable)
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, shift, shift);
 }
 
-void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width, u16 height)
+static void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width,
+		u16 height)
 {
 	u32 val;
 	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 7080f5f04c07..e8dea7485f79 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -430,7 +430,6 @@ void dispc_ovl_set_channel_out(enum omap_plane plane,
 		enum omap_channel channel);
 
 void dispc_mgr_enable_fifohandcheck(enum omap_channel channel, bool enable);
-void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width, u16 height);
 u32 dispc_mgr_get_vsync_irq(enum omap_channel channel);
 u32 dispc_mgr_get_framedone_irq(enum omap_channel channel);
 bool dispc_mgr_go_busy(enum omap_channel channel);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 788a0ef6323a..97b6c4a2bce8 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -304,13 +304,23 @@ static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
 		u16 height, void (*callback)(void *data), void *data)
 {
 	u32 l;
+	struct omap_video_timings timings = {
+		.hsw		= 1,
+		.hfp		= 1,
+		.hbp		= 1,
+		.vsw		= 1,
+		.vfp		= 0,
+		.vbp		= 0,
+		.x_res		= width,
+		.y_res		= height,
+	};
 
 	/*BUG_ON(callback == 0);*/
 	BUG_ON(rfbi.framedone_callback != NULL);
 
 	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
 
-	dispc_mgr_set_lcd_size(dssdev->manager->id, width, height);
+	dispc_mgr_set_lcd_timings(dssdev->manager->id, &timings);
 
 	dispc_mgr_enable(dssdev->manager->id, true);
 
@@ -766,6 +776,16 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
 		u16 *x, u16 *y, u16 *w, u16 *h)
 {
 	u16 dw, dh;
+	struct omap_video_timings timings = {
+		.hsw		= 1,
+		.hfp		= 1,
+		.hbp		= 1,
+		.vsw		= 1,
+		.vfp		= 0,
+		.vbp		= 0,
+		.x_res		= *w,
+		.y_res		= *h,
+	};
 
 	dssdev->driver->get_resolution(dssdev, &dw, &dh);
 
@@ -784,7 +804,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
 	if (*w == 0 || *h == 0)
 		return -EINVAL;
 
-	dispc_mgr_set_lcd_size(dssdev->manager->id, *w, *h);
+	dispc_mgr_set_lcd_timings(dssdev->manager->id, &timings);
 
 	return 0;
 }
-- 
cgit v1.2.3


From c51d921a0cd83ecc768de7176bc7b7c2d76db278 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 16 Apr 2012 12:53:43 +0530
Subject: OMAPDSS: DISPC: Use a common function to set manager timings

Currently, a LCD manager's timings is set by dispc_mgr_set_lcd_timings() and TV
manager's timings is set by dispc_set_digit_size(). Use a common function called
dispc_mgr_set_timings() which sets timings for both type of managers.

We finally want the interface drivers to use an overlay manager function to
configure it's timings, having a common DISPC function would make things
cleaner.

For LCD managers, dispc_mgr_set_timings() sets LCD size and blanking values, for
TV manager, it sets only the TV size since blanking values don't exist for TV.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 43 +++++++++++++++++++++++------------------
 drivers/video/omap2/dss/dpi.c   |  2 +-
 drivers/video/omap2/dss/dsi.c   |  4 ++--
 drivers/video/omap2/dss/dss.h   |  3 +--
 drivers/video/omap2/dss/hdmi.c  |  3 +--
 drivers/video/omap2/dss/rfbi.c  |  4 ++--
 drivers/video/omap2/dss/sdi.c   |  2 +-
 drivers/video/omap2/dss/venc.c  |  7 +++++--
 8 files changed, 37 insertions(+), 31 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index ac9bf750e774..d6a4b31fa0be 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -992,7 +992,7 @@ static void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width,
 	dispc_write_reg(DISPC_SIZE_MGR(channel), val);
 }
 
-void dispc_set_digit_size(u16 width, u16 height)
+static void dispc_mgr_set_digit_size(u16 width, u16 height)
 {
 	u32 val;
 	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
@@ -2341,37 +2341,42 @@ static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
 }
 
 /* change name to mode? */
-void dispc_mgr_set_lcd_timings(enum omap_channel channel,
+void dispc_mgr_set_timings(enum omap_channel channel,
 		struct omap_video_timings *timings)
 {
 	unsigned xtot, ytot;
 	unsigned long ht, vt;
 
-	if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp,
-				timings->hbp, timings->vsw,
-				timings->vfp, timings->vbp))
-		BUG();
+	DSSDBG("channel %d xres %u yres %u\n", channel, timings->x_res,
+			timings->y_res);
+
+	if (dispc_mgr_is_lcd(channel)) {
+		if (!dispc_lcd_timings_ok(timings))
+			BUG();
 
-	_dispc_mgr_set_lcd_timings(channel, timings->hsw, timings->hfp,
-			timings->hbp, timings->vsw, timings->vfp,
-			timings->vbp);
+		_dispc_mgr_set_lcd_timings(channel, timings->hsw, timings->hfp,
+				timings->hbp, timings->vsw, timings->vfp,
+				timings->vbp);
 
-	dispc_mgr_set_lcd_size(channel, timings->x_res, timings->y_res);
+		dispc_mgr_set_lcd_size(channel, timings->x_res, timings->y_res);
 
-	xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp;
-	ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp;
+		xtot = timings->x_res + timings->hfp + timings->hsw +
+				timings->hbp;
+		ytot = timings->y_res + timings->vfp + timings->vsw +
+				timings->vbp;
 
-	ht = (timings->pixel_clock * 1000) / xtot;
-	vt = (timings->pixel_clock * 1000) / xtot / ytot;
+		ht = (timings->pixel_clock * 1000) / xtot;
+		vt = (timings->pixel_clock * 1000) / xtot / ytot;
 
-	DSSDBG("channel %d xres %u yres %u\n", channel, timings->x_res,
-			timings->y_res);
-	DSSDBG("pck %u\n", timings->pixel_clock);
-	DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n",
+		DSSDBG("pck %u\n", timings->pixel_clock);
+		DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n",
 			timings->hsw, timings->hfp, timings->hbp,
 			timings->vsw, timings->vfp, timings->vbp);
 
-	DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
+		DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
+	} else {
+		dispc_mgr_set_digit_size(timings->x_res, timings->y_res);
+	}
 }
 
 static void dispc_mgr_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index faaf305fda27..7dd7f9d25906 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -156,7 +156,7 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
 		t->pixel_clock = pck;
 	}
 
-	dispc_mgr_set_lcd_timings(dssdev->manager->id, t);
+	dispc_mgr_set_timings(dssdev->manager->id, t);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 0d2c53f4271b..b6cf03cc9221 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4219,12 +4219,12 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 		dispc_mgr_enable_stallmode(dssdev->manager->id, true);
 		dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 1);
 
-		dispc_mgr_set_lcd_timings(dssdev->manager->id, &timings);
+		dispc_mgr_set_timings(dssdev->manager->id, &timings);
 	} else {
 		dispc_mgr_enable_stallmode(dssdev->manager->id, false);
 		dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 0);
 
-		dispc_mgr_set_lcd_timings(dssdev->manager->id,
+		dispc_mgr_set_timings(dssdev->manager->id,
 			&dssdev->panel.timings);
 	}
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index e8dea7485f79..da91822b596f 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -407,7 +407,6 @@ void dispc_disable_sidle(void);
 void dispc_lcd_enable_signal_polarity(bool act_high);
 void dispc_lcd_enable_signal(bool enable);
 void dispc_pck_free_enable(bool enable);
-void dispc_set_digit_size(u16 width, u16 height);
 void dispc_enable_fifomerge(bool enable);
 void dispc_enable_gamma_table(bool enable);
 void dispc_set_loadmode(enum omap_dss_load_mode mode);
@@ -442,7 +441,7 @@ void dispc_mgr_enable_stallmode(enum omap_channel channel, bool enable);
 void dispc_mgr_set_tft_data_lines(enum omap_channel channel, u8 data_lines);
 void dispc_mgr_set_lcd_display_type(enum omap_channel channel,
 		enum omap_lcd_display_type type);
-void dispc_mgr_set_lcd_timings(enum omap_channel channel,
+void dispc_mgr_set_timings(enum omap_channel channel,
 		struct omap_video_timings *timings);
 void dispc_mgr_set_pol_freq(enum omap_channel channel,
 		enum omap_panel_config config, u8 acbi, u8 acb);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index c4b4f6950a92..56f6e9ce126f 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -376,8 +376,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	dispc_enable_gamma_table(0);
 
 	/* tv size */
-	dispc_set_digit_size(dssdev->panel.timings.x_res,
-			dssdev->panel.timings.y_res);
+	dispc_mgr_set_timings(dssdev->manager->id, &dssdev->panel.timings);
 
 	hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 1);
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 97b6c4a2bce8..a81ffcbfa68a 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -320,7 +320,7 @@ static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
 
 	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
 
-	dispc_mgr_set_lcd_timings(dssdev->manager->id, &timings);
+	dispc_mgr_set_timings(dssdev->manager->id, &timings);
 
 	dispc_mgr_enable(dssdev->manager->id, true);
 
@@ -804,7 +804,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
 	if (*w == 0 || *h == 0)
 		return -EINVAL;
 
-	dispc_mgr_set_lcd_timings(dssdev->manager->id, &timings);
+	dispc_mgr_set_timings(dssdev->manager->id, &timings);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 8266ca0d666b..741b8341439f 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -107,7 +107,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	}
 
 
-	dispc_mgr_set_lcd_timings(dssdev->manager->id, t);
+	dispc_mgr_set_timings(dssdev->manager->id, t);
 
 	r = dss_set_clock_div(&dss_cinfo);
 	if (r)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 13a20da8ea91..30bbb63421b9 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -421,6 +421,7 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 {
 	u32 l;
 	int r;
+	struct omap_video_timings timings;
 
 	venc_reset();
 	venc_write_config(venc_timings_to_config(&dssdev->panel.timings));
@@ -440,8 +441,10 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 
 	venc_write_reg(VENC_OUTPUT_CONTROL, l);
 
-	dispc_set_digit_size(dssdev->panel.timings.x_res,
-			dssdev->panel.timings.y_res/2);
+	timings = dssdev->panel.timings;
+	timings.y_res /= 2;
+
+	dispc_mgr_set_timings(dssdev->manager->id, &timings);
 
 	r = regulator_enable(venc.vdda_dac_reg);
 	if (r)
-- 
cgit v1.2.3


From 8f366162d213f21d9d77560429085033278830c5 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 16 Apr 2012 12:53:44 +0530
Subject: OMAPDSS: DISPC: Clean up manager timing/size functions

Clean up the DISPC manager timings related function by:

- Create a common function to set size for LCD and TV.
- Create a common function to check timings for LCD and TV.
- Add dss params to get the range of manager size.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c        | 47 +++++++++++++++++++---------------
 drivers/video/omap2/dss/dpi.c          |  2 +-
 drivers/video/omap2/dss/dss.h          |  3 ++-
 drivers/video/omap2/dss/dss_features.c |  6 +++++
 drivers/video/omap2/dss/dss_features.h |  2 ++
 5 files changed, 37 insertions(+), 23 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d6a4b31fa0be..7a65eb07a2c4 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -983,21 +983,13 @@ static void dispc_ovl_enable_replication(enum omap_plane plane, bool enable)
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, shift, shift);
 }
 
-static void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width,
+static void dispc_mgr_set_size(enum omap_channel channel, u16 width,
 		u16 height)
 {
 	u32 val;
-	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
-	val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
-	dispc_write_reg(DISPC_SIZE_MGR(channel), val);
-}
 
-static void dispc_mgr_set_digit_size(u16 width, u16 height)
-{
-	u32 val;
-	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
 	val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
-	dispc_write_reg(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT), val);
+	dispc_write_reg(DISPC_SIZE_MGR(channel), val);
 }
 
 static void dispc_read_plane_fifo_sizes(void)
@@ -2286,6 +2278,12 @@ void dispc_mgr_enable_stallmode(enum omap_channel channel, bool enable)
 		REG_FLD_MOD(DISPC_CONTROL, enable, 11, 11);
 }
 
+static bool _dispc_mgr_size_ok(u16 width, u16 height)
+{
+	return width <= dss_feat_get_param_max(FEAT_PARAM_MGR_WIDTH) &&
+		height <= dss_feat_get_param_max(FEAT_PARAM_MGR_HEIGHT);
+}
+
 static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
 		int vsw, int vfp, int vbp)
 {
@@ -2310,11 +2308,20 @@ static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
 	return true;
 }
 
-bool dispc_lcd_timings_ok(struct omap_video_timings *timings)
+bool dispc_mgr_timings_ok(enum omap_channel channel,
+		struct omap_video_timings *timings)
 {
-	return _dispc_lcd_timings_ok(timings->hsw, timings->hfp,
-			timings->hbp, timings->vsw,
-			timings->vfp, timings->vbp);
+	bool timings_ok;
+
+	timings_ok = _dispc_mgr_size_ok(timings->x_res, timings->y_res);
+
+	if (dispc_mgr_is_lcd(channel))
+		timings_ok =  timings_ok && _dispc_lcd_timings_ok(timings->hsw,
+						timings->hfp, timings->hbp,
+						timings->vsw, timings->vfp,
+						timings->vbp);
+
+	return timings_ok;
 }
 
 static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
@@ -2350,16 +2357,14 @@ void dispc_mgr_set_timings(enum omap_channel channel,
 	DSSDBG("channel %d xres %u yres %u\n", channel, timings->x_res,
 			timings->y_res);
 
-	if (dispc_mgr_is_lcd(channel)) {
-		if (!dispc_lcd_timings_ok(timings))
-			BUG();
+	if (!dispc_mgr_timings_ok(channel, timings))
+		BUG();
 
+	if (dispc_mgr_is_lcd(channel)) {
 		_dispc_mgr_set_lcd_timings(channel, timings->hsw, timings->hfp,
 				timings->hbp, timings->vsw, timings->vfp,
 				timings->vbp);
 
-		dispc_mgr_set_lcd_size(channel, timings->x_res, timings->y_res);
-
 		xtot = timings->x_res + timings->hfp + timings->hsw +
 				timings->hbp;
 		ytot = timings->y_res + timings->vfp + timings->vsw +
@@ -2374,9 +2379,9 @@ void dispc_mgr_set_timings(enum omap_channel channel,
 			timings->vsw, timings->vfp, timings->vbp);
 
 		DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
-	} else {
-		dispc_mgr_set_digit_size(timings->x_res, timings->y_res);
 	}
+
+	dispc_mgr_set_size(channel, timings->x_res, timings->y_res);
 }
 
 static void dispc_mgr_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 7dd7f9d25906..cec116684365 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -312,7 +312,7 @@ int dpi_check_timings(struct omap_dss_device *dssdev,
 	unsigned long pck;
 	struct dispc_clock_info dispc_cinfo;
 
-	if (!dispc_lcd_timings_ok(timings))
+	if (!dispc_mgr_timings_ok(dssdev->manager->id, timings))
 		return -EINVAL;
 
 	if (timings->pixel_clock == 0)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index da91822b596f..1dc336b8bb69 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -411,7 +411,8 @@ void dispc_enable_fifomerge(bool enable);
 void dispc_enable_gamma_table(bool enable);
 void dispc_set_loadmode(enum omap_dss_load_mode mode);
 
-bool dispc_lcd_timings_ok(struct omap_video_timings *timings);
+bool dispc_mgr_timings_ok(enum omap_channel channel,
+		struct omap_video_timings *timings);
 unsigned long dispc_fclk_rate(void);
 void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
 		struct dispc_clock_info *cinfo);
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index ce14aa6dd672..1d10a014bc55 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -311,6 +311,8 @@ static const struct dss_param_range omap2_dss_param_range[] = {
 	 * scaler cannot scale a image with width more than 768.
 	 */
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 768 },
+	[FEAT_PARAM_MGR_WIDTH]			= { 1, 2048 },
+	[FEAT_PARAM_MGR_HEIGHT]			= { 1, 2048 },
 };
 
 static const struct dss_param_range omap3_dss_param_range[] = {
@@ -324,6 +326,8 @@ static const struct dss_param_range omap3_dss_param_range[] = {
 	[FEAT_PARAM_DSIPLL_LPDIV]		= { 1, (1 << 13) - 1},
 	[FEAT_PARAM_DOWNSCALE]			= { 1, 4 },
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 1024 },
+	[FEAT_PARAM_MGR_WIDTH]			= { 1, 2048 },
+	[FEAT_PARAM_MGR_HEIGHT]			= { 1, 2048 },
 };
 
 static const struct dss_param_range omap4_dss_param_range[] = {
@@ -337,6 +341,8 @@ static const struct dss_param_range omap4_dss_param_range[] = {
 	[FEAT_PARAM_DSIPLL_LPDIV]		= { 0, (1 << 13) - 1 },
 	[FEAT_PARAM_DOWNSCALE]			= { 1, 4 },
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 2048 },
+	[FEAT_PARAM_MGR_WIDTH]			= { 1, 2048 },
+	[FEAT_PARAM_MGR_HEIGHT]			= { 1, 2048 },
 };
 
 static const enum dss_feat_id omap2_dss_feat_list[] = {
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index c332e7ddfce1..3736367089a1 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -91,6 +91,8 @@ enum dss_range_param {
 	FEAT_PARAM_DSIPLL_LPDIV,
 	FEAT_PARAM_DOWNSCALE,
 	FEAT_PARAM_LINEWIDTH,
+	FEAT_PARAM_MGR_WIDTH,
+	FEAT_PARAM_MGR_HEIGHT,
 };
 
 /* DSS Feature Functions */
-- 
cgit v1.2.3


From 3dd606e435b36f8461d4c89227a41ac6976969c3 Mon Sep 17 00:00:00 2001
From: Jan Weitzel <j.weitzel@phytec.de>
Date: Fri, 20 Apr 2012 11:41:22 +0200
Subject: ARM: OMAP2+ Add Primview displays to panel-generic

Add displays to panel-generic-dpi.c
Prime View PD050VL1 (640 x 480)
Prime View PD104SLF (800 x 600)
Prime View PM070WL4 (800 x 480)

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c | 63 ++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 89d36237cd51..e42f9dc22123 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -423,6 +423,69 @@ static struct panel_config generic_dpi_panels[] = {
 		.config			= OMAP_DSS_LCD_TFT,
 		.name			= "edt_et0500g0dh6",
 	},
+
+	/* Prime-View PD050VL1 */
+	{
+		{
+			.x_res		= 640,
+			.y_res		= 480,
+
+			.pixel_clock	= 25000,
+
+			.hsw		= 96,
+			.hfp		= 18,
+			.hbp		= 46,
+
+			.vsw		= 2,
+			.vfp		= 10,
+			.vbp		= 33,
+		},
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC,
+		.name			= "primeview_pd050vl1",
+	},
+
+	/* Prime-View PM070WL4 */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 480,
+
+			.pixel_clock	= 32000,
+
+			.hsw		= 128,
+			.hfp		= 42,
+			.hbp		= 86,
+
+			.vsw		= 2,
+			.vfp		= 10,
+			.vbp		= 33,
+		},
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC,
+		.name			= "primeview_pm070wl4",
+	},
+
+	/* Prime-View PD104SLF */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 600,
+
+			.pixel_clock	= 40000,
+
+			.hsw		= 128,
+			.hfp		= 42,
+			.hbp		= 86,
+
+			.vsw		= 4,
+			.vfp		= 1,
+			.vbp		= 23,
+		},
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC,
+		.name			= "primeview_pd104slf",
+	},
 };
 
 struct panel_drv_data {
-- 
cgit v1.2.3


From aed74b55004e1d6c7d445543ceed1d2f110969a1 Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Mon, 2 Apr 2012 20:43:16 +0530
Subject: OMAPDSS: DISPC: Enable predecimation

In OMAP3 and OMAP4, the DISPC Scaler can downscale an image up to 4 times, and
up to 2 times in OMAP2. However, with predecimation, the image can be reduced
to 16 times by fetching only the necessary pixels in memory. Then this
predecimated image can be downscaled further by the DISPC scaler.

The pipeline is configured to use a burst of size 8 * 128 bits which consists
of 8 mini bursts of 16 bytes each. So, horizontal predecimation more than 16
can lead to complete discarding of such mini bursts. L3 interconnect may
handover the bus to some other initiator and inturn delay the fetching of
pixels leading to underflows. So, maximum predecimation limit is fixed at 16.

Based on the downscaling required, a prior calculation of predecimation values
for width and height of an image is done. Since, Predecimation reduces quality
of an image higher priorty is given to DISPC Scaler for downscaling.

This code was successfully tested on OMAP2, OMAP3 and OMAP4. Horizontal and
vertical predecimation worked fine except for some synclost errors due to
undocumented errata in OMAP3 which are fixed later and skewed images were seen
on OMAP2 and OMAP3 during horizontal predecimation which will be addressed in
the future patches.

This code is based on code written by Lajos Molnar <lajos@ti.com> who had added
predecimation support for NV12/YUV/rotated/SDMA buffers.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 266 ++++++++++++++++++++++++++++------------
 1 file changed, 185 insertions(+), 81 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 7a65eb07a2c4..8c96f5700f93 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1424,7 +1424,7 @@ static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
 		enum omap_color_mode color_mode, bool fieldmode,
 		unsigned int field_offset,
 		unsigned *offset0, unsigned *offset1,
-		s32 *row_inc, s32 *pix_inc)
+		s32 *row_inc, s32 *pix_inc, int x_predecim, int y_predecim)
 {
 	u8 ps;
 
@@ -1470,10 +1470,10 @@ static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
 		else
 			*offset0 = 0;
 
-		*row_inc = pixinc(1 + (screen_width - width) +
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(1, ps);
+		*row_inc = pixinc(1 +
+			(y_predecim * screen_width - x_predecim * width) +
+			(fieldmode ? screen_width : 0), ps);
+		*pix_inc = pixinc(x_predecim, ps);
 		break;
 
 	case OMAP_DSS_ROT_0 + 4:
@@ -1491,10 +1491,10 @@ static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = field_offset * screen_width * ps;
 		else
 			*offset0 = 0;
-		*row_inc = pixinc(1 - (screen_width + width) -
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(1, ps);
+		*row_inc = pixinc(1 -
+			(y_predecim * screen_width + x_predecim * width) -
+			(fieldmode ? screen_width : 0), ps);
+		*pix_inc = pixinc(x_predecim, ps);
 		break;
 
 	default:
@@ -1508,7 +1508,7 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 		enum omap_color_mode color_mode, bool fieldmode,
 		unsigned int field_offset,
 		unsigned *offset0, unsigned *offset1,
-		s32 *row_inc, s32 *pix_inc)
+		s32 *row_inc, s32 *pix_inc, int x_predecim, int y_predecim)
 {
 	u8 ps;
 	u16 fbw, fbh;
@@ -1550,10 +1550,14 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * screen_width * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(1 + (screen_width - fbw) +
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(1, ps);
+		*row_inc = pixinc(1 +
+			(y_predecim * screen_width - fbw * x_predecim) +
+			(fieldmode ? screen_width : 0),	ps);
+		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(x_predecim, ps);
 		break;
 	case OMAP_DSS_ROT_90:
 		*offset1 = screen_width * (fbh - 1) * ps;
@@ -1561,9 +1565,9 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(screen_width * (fbh - 1) + 1 +
-				(fieldmode ? 1 : 0), ps);
-		*pix_inc = pixinc(-screen_width, ps);
+		*row_inc = pixinc(screen_width * (fbh * x_predecim - 1) +
+				y_predecim + (fieldmode ? 1 : 0), ps);
+		*pix_inc = pixinc(-x_predecim * screen_width, ps);
 		break;
 	case OMAP_DSS_ROT_180:
 		*offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;
@@ -1572,10 +1576,13 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 		else
 			*offset0 = *offset1;
 		*row_inc = pixinc(-1 -
-				(screen_width - fbw) -
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(-1, ps);
+			(y_predecim * screen_width - fbw * x_predecim) -
+			(fieldmode ? screen_width : 0),	ps);
+		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(-x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(-x_predecim, ps);
 		break;
 	case OMAP_DSS_ROT_270:
 		*offset1 = (fbw - 1) * ps;
@@ -1583,9 +1590,9 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 - field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(-screen_width * (fbh - 1) - 1 -
-				(fieldmode ? 1 : 0), ps);
-		*pix_inc = pixinc(screen_width, ps);
+		*row_inc = pixinc(-screen_width * (fbh * x_predecim - 1) -
+				y_predecim - (fieldmode ? 1 : 0), ps);
+		*pix_inc = pixinc(x_predecim * screen_width, ps);
 		break;
 
 	/* mirroring */
@@ -1595,10 +1602,14 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * screen_width * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(screen_width * 2 - 1 +
+		*row_inc = pixinc(y_predecim * screen_width * 2 - 1 +
 				(fieldmode ? screen_width : 0),
 				ps);
-		*pix_inc = pixinc(-1, ps);
+		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(-x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(-x_predecim, ps);
 		break;
 
 	case OMAP_DSS_ROT_90 + 4:
@@ -1607,10 +1618,10 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(-screen_width * (fbh - 1) + 1 +
-				(fieldmode ? 1 : 0),
+		*row_inc = pixinc(-screen_width * (fbh * x_predecim - 1) +
+				y_predecim + (fieldmode ? 1 : 0),
 				ps);
-		*pix_inc = pixinc(screen_width, ps);
+		*pix_inc = pixinc(x_predecim * screen_width, ps);
 		break;
 
 	case OMAP_DSS_ROT_180 + 4:
@@ -1619,10 +1630,14 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 - field_offset * screen_width * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(1 - screen_width * 2 -
+		*row_inc = pixinc(1 - y_predecim * screen_width * 2 -
 				(fieldmode ? screen_width : 0),
 				ps);
-		*pix_inc = pixinc(1, ps);
+		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(x_predecim, ps);
 		break;
 
 	case OMAP_DSS_ROT_270 + 4:
@@ -1631,10 +1646,10 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 - field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(screen_width * (fbh - 1) - 1 -
-				(fieldmode ? 1 : 0),
+		*row_inc = pixinc(screen_width * (fbh * x_predecim - 1) -
+				y_predecim - (fieldmode ? 1 : 0),
 				ps);
-		*pix_inc = pixinc(-screen_width, ps);
+		*pix_inc = pixinc(-x_predecim * screen_width, ps);
 		break;
 
 	default:
@@ -1725,13 +1740,17 @@ static unsigned long calc_fclk(enum omap_channel channel, u16 width,
 static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		enum omap_channel channel, u16 width, u16 height,
 		u16 out_width, u16 out_height,
-		enum omap_color_mode color_mode, bool *five_taps)
+		enum omap_color_mode color_mode, bool *five_taps,
+		int *x_predecim, int *y_predecim)
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
 	const int maxsinglelinewidth =
 				dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
+	const int max_decim_limit = 16;
 	unsigned long fclk = 0;
+	int decim_x, decim_y, error, min_factor;
+	u16 in_width, in_height, in_width_max = 0;
 
 	if (width == out_width && height == out_height)
 		return 0;
@@ -1739,45 +1758,121 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0)
 		return -EINVAL;
 
-	if (out_width < width / maxdownscale ||
-			out_width > width * 8)
+	*x_predecim = max_decim_limit;
+	*y_predecim = max_decim_limit;
+
+	if (color_mode == OMAP_DSS_COLOR_CLUT1 ||
+	    color_mode == OMAP_DSS_COLOR_CLUT2 ||
+	    color_mode == OMAP_DSS_COLOR_CLUT4 ||
+	    color_mode == OMAP_DSS_COLOR_CLUT8) {
+		*x_predecim = 1;
+		*y_predecim = 1;
+		*five_taps = false;
+		return 0;
+	}
+
+	decim_x = DIV_ROUND_UP(DIV_ROUND_UP(width, out_width), maxdownscale);
+	decim_y = DIV_ROUND_UP(DIV_ROUND_UP(height, out_height), maxdownscale);
+
+	min_factor = min(decim_x, decim_y);
+
+	if (decim_x > *x_predecim || out_width > width * 8)
 		return -EINVAL;
 
-	if (out_height < height / maxdownscale ||
-			out_height > height * 8)
+	if (decim_y > *y_predecim || out_height > height * 8)
 		return -EINVAL;
 
 	if (cpu_is_omap24xx()) {
-		if (width > maxsinglelinewidth)
-			DSSERR("Cannot scale max input width exceeded");
 		*five_taps = false;
-		fclk = calc_fclk(channel, width, height, out_width,
-								out_height);
+
+		do {
+			in_height = DIV_ROUND_UP(height, decim_y);
+			in_width = DIV_ROUND_UP(width, decim_x);
+			fclk = calc_fclk(channel, in_width, in_height,
+					out_width, out_height);
+			error = (in_width > maxsinglelinewidth || !fclk ||
+				fclk > dispc_fclk_rate());
+			if (error) {
+				if (decim_x == decim_y) {
+					decim_x = min_factor;
+					decim_y++;
+				} else {
+					swap(decim_x, decim_y);
+					if (decim_x < decim_y)
+						decim_x++;
+				}
+			}
+		} while (decim_x <= *x_predecim && decim_y <= *y_predecim &&
+				error);
+
+		if (in_width > maxsinglelinewidth) {
+			DSSERR("Cannot scale max input width exceeded");
+			return -EINVAL;
+		}
 	} else if (cpu_is_omap34xx()) {
-		if (width > (maxsinglelinewidth * 2)) {
+
+		do {
+			in_height = DIV_ROUND_UP(height, decim_y);
+			in_width = DIV_ROUND_UP(width, decim_x);
+			fclk = calc_fclk_five_taps(channel, in_width, in_height,
+				out_width, out_height, color_mode);
+
+			if (in_width > maxsinglelinewidth)
+				if (in_height > out_height &&
+					in_height < out_height * 2)
+					*five_taps = false;
+			if (!*five_taps)
+				fclk = calc_fclk(channel, in_width, in_height,
+					out_width, out_height);
+			error = (in_width > maxsinglelinewidth * 2 ||
+				(in_width > maxsinglelinewidth && *five_taps) ||
+				!fclk || fclk > dispc_fclk_rate());
+			if (error) {
+				if (decim_x == decim_y) {
+					decim_x = min_factor;
+					decim_y++;
+				} else {
+					swap(decim_x, decim_y);
+					if (decim_x < decim_y)
+						decim_x++;
+				}
+			}
+		} while (decim_x <= *x_predecim && decim_y <= *y_predecim
+			&& error);
+
+		if (in_width > (maxsinglelinewidth * 2)) {
 			DSSERR("Cannot setup scaling");
 			DSSERR("width exceeds maximum width possible");
 			return -EINVAL;
 		}
-		fclk = calc_fclk_five_taps(channel, width, height, out_width,
-						out_height, color_mode);
-		if (width > maxsinglelinewidth) {
-			if (height > out_height && height < out_height * 2)
-				*five_taps = false;
-			else {
-				DSSERR("cannot setup scaling with five taps");
-				return -EINVAL;
-			}
+
+		if (in_width > maxsinglelinewidth && *five_taps) {
+			DSSERR("cannot setup scaling with five taps");
+			return -EINVAL;
 		}
-		if (!*five_taps)
-			fclk = calc_fclk(channel, width, height, out_width,
-					out_height);
 	} else {
-		if (width > maxsinglelinewidth) {
+		int decim_x_min = decim_x;
+		in_height = DIV_ROUND_UP(height, decim_y);
+		in_width_max = dispc_fclk_rate() /
+				DIV_ROUND_UP(dispc_mgr_pclk_rate(channel),
+						out_width);
+		decim_x = DIV_ROUND_UP(width, in_width_max);
+
+		decim_x = decim_x > decim_x_min ? decim_x : decim_x_min;
+		if (decim_x > *x_predecim)
+			return -EINVAL;
+
+		do {
+			in_width = DIV_ROUND_UP(width, decim_x);
+		} while (decim_x <= *x_predecim &&
+				in_width > maxsinglelinewidth && decim_x++);
+
+		if (in_width > maxsinglelinewidth) {
 			DSSERR("Cannot scale width exceeds max line width");
 			return -EINVAL;
 		}
-		fclk = calc_fclk(channel, width, height, out_width,
+
+		fclk = calc_fclk(channel, in_width, in_height, out_width,
 				out_height);
 	}
 
@@ -1792,6 +1887,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		return -EINVAL;
 	}
 
+	*x_predecim = decim_x;
+	*y_predecim = decim_y;
 	return 0;
 }
 
@@ -1807,8 +1904,11 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	s32 pix_inc;
 	u16 frame_height = oi->height;
 	unsigned int field_offset = 0;
-	u16 outw, outh;
+	u16 in_height = oi->height;
+	u16 in_width = oi->width;
+	u16 out_width, out_height;
 	enum omap_channel channel;
+	int x_predecim = 1, y_predecim = 1;
 
 	channel = dispc_ovl_get_channel_out(plane);
 
@@ -1822,32 +1922,35 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	if (oi->paddr == 0)
 		return -EINVAL;
 
-	outw = oi->out_width == 0 ? oi->width : oi->out_width;
-	outh = oi->out_height == 0 ? oi->height : oi->out_height;
+	out_width = oi->out_width == 0 ? oi->width : oi->out_width;
+	out_height = oi->out_height == 0 ? oi->height : oi->out_height;
 
-	if (ilace && oi->height == outh)
+	if (ilace && oi->height == out_height)
 		fieldmode = 1;
 
 	if (ilace) {
 		if (fieldmode)
-			oi->height /= 2;
+			in_height /= 2;
 		oi->pos_y /= 2;
-		outh /= 2;
+		out_height /= 2;
 
 		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
 				"out_height %d\n",
-				oi->height, oi->pos_y, outh);
+				in_height, oi->pos_y, out_height);
 	}
 
 	if (!dss_feat_color_mode_supported(plane, oi->color_mode))
 		return -EINVAL;
 
-	r = dispc_ovl_calc_scaling(plane, channel, oi->width, oi->height,
-			outw, outh, oi->color_mode,
-			&five_taps);
+	r = dispc_ovl_calc_scaling(plane, channel, in_width, in_height,
+			out_width, out_height, oi->color_mode, &five_taps,
+			&x_predecim, &y_predecim);
 	if (r)
 		return r;
 
+	in_width = DIV_ROUND_UP(in_width, x_predecim);
+	in_height = DIV_ROUND_UP(in_height, y_predecim);
+
 	if (oi->color_mode == OMAP_DSS_COLOR_YUV2 ||
 			oi->color_mode == OMAP_DSS_COLOR_UYVY ||
 			oi->color_mode == OMAP_DSS_COLOR_NV12)
@@ -1861,10 +1964,10 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 		 * so the integer part must be added to the base address of the
 		 * bottom field.
 		 */
-		if (!oi->height || oi->height == outh)
+		if (!in_height || in_height == out_height)
 			field_offset = 0;
 		else
-			field_offset = oi->height / outh / 2;
+			field_offset = in_height / out_height / 2;
 	}
 
 	/* Fields are independent but interleaved in memory. */
@@ -1873,14 +1976,16 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 
 	if (oi->rotation_type == OMAP_DSS_ROT_DMA)
 		calc_dma_rotation_offset(oi->rotation, oi->mirror,
-				oi->screen_width, oi->width, frame_height,
+				oi->screen_width, in_width, frame_height,
 				oi->color_mode, fieldmode, field_offset,
-				&offset0, &offset1, &row_inc, &pix_inc);
+				&offset0, &offset1, &row_inc, &pix_inc,
+				x_predecim, y_predecim);
 	else
 		calc_vrfb_rotation_offset(oi->rotation, oi->mirror,
-				oi->screen_width, oi->width, frame_height,
+				oi->screen_width, in_width, frame_height,
 				oi->color_mode, fieldmode, field_offset,
-				&offset0, &offset1, &row_inc, &pix_inc);
+				&offset0, &offset1, &row_inc, &pix_inc,
+				x_predecim, y_predecim);
 
 	DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
 			offset0, offset1, row_inc, pix_inc);
@@ -1899,19 +2004,18 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	dispc_ovl_set_row_inc(plane, row_inc);
 	dispc_ovl_set_pix_inc(plane, pix_inc);
 
-	DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, oi->width,
-			oi->height, outw, outh);
+	DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, in_width,
+			in_height, out_width, out_height);
 
 	dispc_ovl_set_pos(plane, oi->pos_x, oi->pos_y);
 
-	dispc_ovl_set_pic_size(plane, oi->width, oi->height);
+	dispc_ovl_set_pic_size(plane, in_width, in_height);
 
 	if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) {
-		dispc_ovl_set_scaling(plane, oi->width, oi->height,
-				   outw, outh,
-				   ilace, five_taps, fieldmode,
+		dispc_ovl_set_scaling(plane, in_width, in_height, out_width,
+				   out_height, ilace, five_taps, fieldmode,
 				   oi->color_mode, oi->rotation);
-		dispc_ovl_set_vid_size(plane, outw, outh);
+		dispc_ovl_set_vid_size(plane, out_width, out_height);
 		dispc_ovl_set_vid_color_conv(plane, cconv);
 	}
 
-- 
cgit v1.2.3


From 7faa92339bbb1e6b9a80983b206642517327eb75 Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Mon, 2 Apr 2012 20:43:17 +0530
Subject: OMAPDSS: DISPC: Handle synclost errors in OMAP3
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In OMAP3 DISPC video overlays suffer from some undocumented horizontal position
and timing related limitations leading to SYNCLOST errors. Whenever the image
window is moved towards the right of the screen SYNCLOST errors become
frequent. Checks have been implemented to see that DISPC driver rejects
configuration exceeding above limitations.

This code was successfully tested on OMAP3. This code is written based on code
written by Ville Syrjälä <ville.syrjala@nokia.com> in Linux OMAP kernel. Ville
Syrjälä <ville.syrjala@nokia.com> had added checks for video overlay horizontal
timing and DISPC horizontal blanking length limitations.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 72 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 69 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 8c96f5700f93..bea37bbd0e3e 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1657,6 +1657,63 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 	}
 }
 
+/*
+ * This function is used to avoid synclosts in OMAP3, because of some
+ * undocumented horizontal position and timing related limitations.
+ */
+static int check_horiz_timing_omap3(enum omap_channel channel, u16 pos_x,
+		u16 width, u16 height, u16 out_width, u16 out_height)
+{
+	int DS = DIV_ROUND_UP(height, out_height);
+	struct omap_dss_device *dssdev = dispc_mgr_get_device(channel);
+	struct omap_video_timings t = dssdev->panel.timings;
+	unsigned long nonactive, lclk, pclk;
+	static const u8 limits[3] = { 8, 10, 20 };
+	u64 val, blank;
+	int i;
+
+	nonactive = t.x_res + t.hfp + t.hsw + t.hbp - out_width;
+	pclk = dispc_mgr_pclk_rate(channel);
+	if (dispc_mgr_is_lcd(channel))
+		lclk = dispc_mgr_lclk_rate(channel);
+	else
+		lclk = dispc_fclk_rate();
+
+	i = 0;
+	if (out_height < height)
+		i++;
+	if (out_width < width)
+		i++;
+	blank = div_u64((u64)(t.hbp + t.hsw + t.hfp) * lclk, pclk);
+	DSSDBG("blanking period + ppl = %llu (limit = %u)\n", blank, limits[i]);
+	if (blank <= limits[i])
+		return -EINVAL;
+
+	/*
+	 * Pixel data should be prepared before visible display point starts.
+	 * So, atleast DS-2 lines must have already been fetched by DISPC
+	 * during nonactive - pos_x period.
+	 */
+	val = div_u64((u64)(nonactive - pos_x) * lclk, pclk);
+	DSSDBG("(nonactive - pos_x) * pcd = %llu max(0, DS - 2) * width = %d\n",
+		val, max(0, DS - 2) * width);
+	if (val < max(0, DS - 2) * width)
+		return -EINVAL;
+
+	/*
+	 * All lines need to be refilled during the nonactive period of which
+	 * only one line can be loaded during the active period. So, atleast
+	 * DS - 1 lines should be loaded during nonactive period.
+	 */
+	val =  div_u64((u64)nonactive * lclk, pclk);
+	DSSDBG("nonactive * pcd  = %llu, max(0, DS - 1) * width = %d\n",
+		val, max(0, DS - 1) * width);
+	if (val < max(0, DS - 1) * width)
+		return -EINVAL;
+
+	return 0;
+}
+
 static unsigned long calc_fclk_five_taps(enum omap_channel channel, u16 width,
 		u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode)
@@ -1741,7 +1798,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		enum omap_channel channel, u16 width, u16 height,
 		u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
-		int *x_predecim, int *y_predecim)
+		int *x_predecim, int *y_predecim, u16 pos_x)
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
@@ -1817,6 +1874,9 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 			fclk = calc_fclk_five_taps(channel, in_width, in_height,
 				out_width, out_height, color_mode);
 
+			error = check_horiz_timing_omap3(channel, pos_x,
+				in_width, in_height, out_width, out_height);
+
 			if (in_width > maxsinglelinewidth)
 				if (in_height > out_height &&
 					in_height < out_height * 2)
@@ -1824,7 +1884,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 			if (!*five_taps)
 				fclk = calc_fclk(channel, in_width, in_height,
 					out_width, out_height);
-			error = (in_width > maxsinglelinewidth * 2 ||
+			error = (error || in_width > maxsinglelinewidth * 2 ||
 				(in_width > maxsinglelinewidth && *five_taps) ||
 				!fclk || fclk > dispc_fclk_rate());
 			if (error) {
@@ -1840,6 +1900,12 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		} while (decim_x <= *x_predecim && decim_y <= *y_predecim
 			&& error);
 
+		if (check_horiz_timing_omap3(channel, pos_x, width, height,
+			out_width, out_height)){
+				DSSERR("horizontal timing too tight\n");
+				return -EINVAL;
+		}
+
 		if (in_width > (maxsinglelinewidth * 2)) {
 			DSSERR("Cannot setup scaling");
 			DSSERR("width exceeds maximum width possible");
@@ -1944,7 +2010,7 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 
 	r = dispc_ovl_calc_scaling(plane, channel, in_width, in_height,
 			out_width, out_height, oi->color_mode, &five_taps,
-			&x_predecim, &y_predecim);
+			&x_predecim, &y_predecim, oi->pos_x);
 	if (r)
 		return r;
 
-- 
cgit v1.2.3


From 8b53d9911982794b3f6d5513741495c3f70962cd Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Mon, 23 Apr 2012 12:16:50 +0530
Subject: OMAPDSS: DISPC: Correct DISPC functional clock usage

DISPC_FCLK is incorrectly used as functional clock of DISPC in scaling
calculations. So, DISPC_CORE_CLK replaces as functional clock of DISPC.
DISPC_CORE_CLK is derived from DISPC_FCLK divided by an independent DISPC
divisor LCD.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 67 ++++++++++++++++++++++++-----------------
 drivers/video/omap2/dss/dss.h   |  1 +
 2 files changed, 41 insertions(+), 27 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index bea37bbd0e3e..49015b8a9e4a 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1714,11 +1714,11 @@ static int check_horiz_timing_omap3(enum omap_channel channel, u16 pos_x,
 	return 0;
 }
 
-static unsigned long calc_fclk_five_taps(enum omap_channel channel, u16 width,
-		u16 height, u16 out_width, u16 out_height,
+static unsigned long calc_core_clk_five_taps(enum omap_channel channel,
+		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode)
 {
-	u32 fclk = 0;
+	u32 core_clk = 0;
 	u64 tmp, pclk = dispc_mgr_pclk_rate(channel);
 
 	if (height <= out_height && width <= out_width)
@@ -1730,7 +1730,7 @@ static unsigned long calc_fclk_five_taps(enum omap_channel channel, u16 width,
 
 		tmp = pclk * height * out_width;
 		do_div(tmp, 2 * out_height * ppl);
-		fclk = tmp;
+		core_clk = tmp;
 
 		if (height > 2 * out_height) {
 			if (ppl == out_width)
@@ -1738,23 +1738,23 @@ static unsigned long calc_fclk_five_taps(enum omap_channel channel, u16 width,
 
 			tmp = pclk * (height - 2 * out_height) * out_width;
 			do_div(tmp, 2 * out_height * (ppl - out_width));
-			fclk = max(fclk, (u32) tmp);
+			core_clk = max_t(u32, core_clk, tmp);
 		}
 	}
 
 	if (width > out_width) {
 		tmp = pclk * width;
 		do_div(tmp, out_width);
-		fclk = max(fclk, (u32) tmp);
+		core_clk = max_t(u32, core_clk, tmp);
 
 		if (color_mode == OMAP_DSS_COLOR_RGB24U)
-			fclk <<= 1;
+			core_clk <<= 1;
 	}
 
-	return fclk;
+	return core_clk;
 }
 
-static unsigned long calc_fclk(enum omap_channel channel, u16 width,
+static unsigned long calc_core_clk(enum omap_channel channel, u16 width,
 		u16 height, u16 out_width, u16 out_height)
 {
 	unsigned int hf, vf;
@@ -1805,7 +1805,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	const int maxsinglelinewidth =
 				dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
 	const int max_decim_limit = 16;
-	unsigned long fclk = 0;
+	unsigned long core_clk = 0;
 	int decim_x, decim_y, error, min_factor;
 	u16 in_width, in_height, in_width_max = 0;
 
@@ -1845,10 +1845,10 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		do {
 			in_height = DIV_ROUND_UP(height, decim_y);
 			in_width = DIV_ROUND_UP(width, decim_x);
-			fclk = calc_fclk(channel, in_width, in_height,
+			core_clk = calc_core_clk(channel, in_width, in_height,
 					out_width, out_height);
-			error = (in_width > maxsinglelinewidth || !fclk ||
-				fclk > dispc_fclk_rate());
+			error = (in_width > maxsinglelinewidth || !core_clk ||
+				core_clk > dispc_core_clk_rate());
 			if (error) {
 				if (decim_x == decim_y) {
 					decim_x = min_factor;
@@ -1871,8 +1871,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		do {
 			in_height = DIV_ROUND_UP(height, decim_y);
 			in_width = DIV_ROUND_UP(width, decim_x);
-			fclk = calc_fclk_five_taps(channel, in_width, in_height,
-				out_width, out_height, color_mode);
+			core_clk = calc_core_clk_five_taps(channel, in_width,
+				in_height, out_width, out_height, color_mode);
 
 			error = check_horiz_timing_omap3(channel, pos_x,
 				in_width, in_height, out_width, out_height);
@@ -1882,11 +1882,11 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 					in_height < out_height * 2)
 					*five_taps = false;
 			if (!*five_taps)
-				fclk = calc_fclk(channel, in_width, in_height,
-					out_width, out_height);
+				core_clk = calc_core_clk(channel, in_width,
+					in_height, out_width, out_height);
 			error = (error || in_width > maxsinglelinewidth * 2 ||
 				(in_width > maxsinglelinewidth && *five_taps) ||
-				!fclk || fclk > dispc_fclk_rate());
+				!core_clk || core_clk > dispc_core_clk_rate());
 			if (error) {
 				if (decim_x == decim_y) {
 					decim_x = min_factor;
@@ -1919,7 +1919,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	} else {
 		int decim_x_min = decim_x;
 		in_height = DIV_ROUND_UP(height, decim_y);
-		in_width_max = dispc_fclk_rate() /
+		in_width_max = dispc_core_clk_rate() /
 				DIV_ROUND_UP(dispc_mgr_pclk_rate(channel),
 						out_width);
 		decim_x = DIV_ROUND_UP(width, in_width_max);
@@ -1938,18 +1938,18 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 			return -EINVAL;
 		}
 
-		fclk = calc_fclk(channel, in_width, in_height, out_width,
-				out_height);
+		core_clk = calc_core_clk(channel, in_width, in_height,
+				out_width, out_height);
 	}
 
-	DSSDBG("required fclk rate = %lu Hz\n", fclk);
-	DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
+	DSSDBG("required core clk rate = %lu Hz\n", core_clk);
+	DSSDBG("current core clk rate = %lu Hz\n", dispc_core_clk_rate());
 
-	if (!fclk || fclk > dispc_fclk_rate()) {
+	if (!core_clk || core_clk > dispc_core_clk_rate()) {
 		DSSERR("failed to set up scaling, "
-			"required fclk rate = %lu Hz, "
-			"current fclk rate = %lu Hz\n",
-			fclk, dispc_fclk_rate());
+			"required core clk rate = %lu Hz, "
+			"current core clk rate = %lu Hz\n",
+			core_clk, dispc_core_clk_rate());
 		return -EINVAL;
 	}
 
@@ -2657,6 +2657,19 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
 	}
 }
 
+unsigned long dispc_core_clk_rate(void)
+{
+	int lcd;
+	unsigned long fclk = dispc_fclk_rate();
+
+	if (dss_has_feature(FEAT_CORE_CLK_DIV))
+		lcd = REG_GET(DISPC_DIVISOR, 23, 16);
+	else
+		lcd = REG_GET(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD), 23, 16);
+
+	return fclk / lcd;
+}
+
 void dispc_dump_clocks(struct seq_file *s)
 {
 	int lcd, pcd;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 1dc336b8bb69..5ca67f111d09 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -448,6 +448,7 @@ void dispc_mgr_set_pol_freq(enum omap_channel channel,
 		enum omap_panel_config config, u8 acbi, u8 acb);
 unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
 unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
+unsigned long dispc_core_clk_rate(void);
 int dispc_mgr_set_clock_div(enum omap_channel channel,
 		struct dispc_clock_info *cinfo);
 int dispc_mgr_get_clock_div(enum omap_channel channel,
-- 
cgit v1.2.3


From 2da35193dc81b574001a47347f41c4922b1266d3 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 22 Dec 2011 10:37:33 +0200
Subject: OMAPDSS: panel-dvi: add PD gpio handling

The driver for the TFP410 chip should handle the power-down signal of
the chip, instead of the current way of handling it in the board files.

This patch adds power_down_gpio into the device's platform data, and
adds the necessary code in the driver to request and handle the GPIO.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-dvi.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-dvi.c
index 03eb14af33e0..876b7989ecb4 100644
--- a/drivers/video/omap2/displays/panel-dvi.c
+++ b/drivers/video/omap2/displays/panel-dvi.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <video/omapdss.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <drm/drm_edid.h>
 
 #include <video/omap-panel-dvi.h>
@@ -44,6 +45,8 @@ struct panel_drv_data {
 	struct omap_dss_device *dssdev;
 
 	struct mutex lock;
+
+	int pd_gpio;
 };
 
 static inline struct panel_dvi_platform_data
@@ -54,6 +57,7 @@ static inline struct panel_dvi_platform_data
 
 static int panel_dvi_power_on(struct omap_dss_device *dssdev)
 {
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
 	int r;
 
@@ -70,6 +74,9 @@ static int panel_dvi_power_on(struct omap_dss_device *dssdev)
 			goto err1;
 	}
 
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value(ddata->pd_gpio, 1);
+
 	return 0;
 err1:
 	omapdss_dpi_display_disable(dssdev);
@@ -79,11 +86,15 @@ err0:
 
 static void panel_dvi_power_off(struct omap_dss_device *dssdev)
 {
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value(ddata->pd_gpio, 0);
+
 	if (pdata->platform_disable)
 		pdata->platform_disable(dssdev);
 
@@ -92,7 +103,9 @@ static void panel_dvi_power_off(struct omap_dss_device *dssdev)
 
 static int panel_dvi_probe(struct omap_dss_device *dssdev)
 {
+	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
 	struct panel_drv_data *ddata;
+	int r;
 
 	ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
@@ -104,6 +117,21 @@ static int panel_dvi_probe(struct omap_dss_device *dssdev)
 	ddata->dssdev = dssdev;
 	mutex_init(&ddata->lock);
 
+	if (pdata)
+		ddata->pd_gpio = pdata->power_down_gpio;
+	else
+		ddata->pd_gpio = -1;
+
+	if (gpio_is_valid(ddata->pd_gpio)) {
+		r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
+				"tfp410 pd");
+		if (r) {
+			dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
+					ddata->pd_gpio);
+			ddata->pd_gpio = -1;
+		}
+	}
+
 	dev_set_drvdata(&dssdev->dev, ddata);
 
 	return 0;
@@ -115,6 +143,9 @@ static void __exit panel_dvi_remove(struct omap_dss_device *dssdev)
 
 	mutex_lock(&ddata->lock);
 
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_free(ddata->pd_gpio);
+
 	dev_set_drvdata(&dssdev->dev, NULL);
 
 	mutex_unlock(&ddata->lock);
-- 
cgit v1.2.3


From e813a55eb9c9bc6c8039fb16332cf43402125b30 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 17 Feb 2012 13:30:27 +0200
Subject: OMAP: board-files: remove custom PD GPIO handling for DVI output

Now that the panel-dvi driver handles the PD (power-down) GPIO, we can
remove the custom PD handling from the board files.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/displays/panel-dvi.c | 13 -------------
 1 file changed, 13 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-dvi.c
index 876b7989ecb4..7e8cadd42fec 100644
--- a/drivers/video/omap2/displays/panel-dvi.c
+++ b/drivers/video/omap2/displays/panel-dvi.c
@@ -58,7 +58,6 @@ static inline struct panel_dvi_platform_data
 static int panel_dvi_power_on(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
 	int r;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
@@ -68,18 +67,10 @@ static int panel_dvi_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err0;
 
-	if (pdata->platform_enable) {
-		r = pdata->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
 	if (gpio_is_valid(ddata->pd_gpio))
 		gpio_set_value(ddata->pd_gpio, 1);
 
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
 err0:
 	return r;
 }
@@ -87,7 +78,6 @@ err0:
 static void panel_dvi_power_off(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
@@ -95,9 +85,6 @@ static void panel_dvi_power_off(struct omap_dss_device *dssdev)
 	if (gpio_is_valid(ddata->pd_gpio))
 		gpio_set_value(ddata->pd_gpio, 0);
 
-	if (pdata->platform_disable)
-		pdata->platform_disable(dssdev);
-
 	omapdss_dpi_display_disable(dssdev);
 }
 
-- 
cgit v1.2.3


From 2e6f2ee7ace43d7c8d0e9abf9b0767ab99d3f2aa Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 5 Mar 2012 14:29:28 +0200
Subject: OMAPDSS: TFP410: rename dvi -> tfp410

The driver for the TFP410 DPI-to-DVI chip was named quite badly as "DVI
panel driver". This patch renames the code to use tfp410 name for the
driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/displays/Kconfig     |  8 +--
 drivers/video/omap2/displays/Makefile    |  2 +-
 drivers/video/omap2/displays/panel-dvi.c | 94 ++++++++++++++++----------------
 3 files changed, 52 insertions(+), 52 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 408a9927be92..c3853c92279b 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -10,12 +10,12 @@ config PANEL_GENERIC_DPI
 	  Supports LCD Panel used in TI SDP3430 and EVM boards,
 	  OMAP3517 EVM boards and CM-T35.
 
-config PANEL_DVI
-	tristate "DVI output"
+config PANEL_TFP410
+	tristate "TFP410 DPI-to-DVI chip"
 	depends on OMAP2_DSS_DPI && I2C
 	help
-	  Driver for external monitors, connected via DVI. The driver uses i2c
-	  to read EDID information from the monitor.
+	  Driver for TFP410 DPI-to-DVI chip. The driver uses i2c to read EDID
+	  information from the monitor.
 
 config PANEL_LGPHILIPS_LB035Q02
 	tristate "LG.Philips LB035Q02 LCD Panel"
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index fbfafc6eebb4..58905ef010c6 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
-obj-$(CONFIG_PANEL_DVI) += panel-dvi.o
+obj-$(CONFIG_PANEL_TFP410) += panel-dvi.o
 obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-dvi.c
index 7e8cadd42fec..e6d6849a27de 100644
--- a/drivers/video/omap2/displays/panel-dvi.c
+++ b/drivers/video/omap2/displays/panel-dvi.c
@@ -1,5 +1,5 @@
 /*
- * DVI output support
+ * TFP410 DPI-to-DVI chip
  *
  * Copyright (C) 2011 Texas Instruments Inc
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
@@ -26,7 +26,7 @@
 
 #include <video/omap-panel-dvi.h>
 
-static const struct omap_video_timings panel_dvi_default_timings = {
+static const struct omap_video_timings tfp410_default_timings = {
 	.x_res		= 640,
 	.y_res		= 480,
 
@@ -49,13 +49,13 @@ struct panel_drv_data {
 	int pd_gpio;
 };
 
-static inline struct panel_dvi_platform_data
+static inline struct tfp410_platform_data
 *get_pdata(const struct omap_dss_device *dssdev)
 {
 	return dssdev->data;
 }
 
-static int panel_dvi_power_on(struct omap_dss_device *dssdev)
+static int tfp410_power_on(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	int r;
@@ -75,7 +75,7 @@ err0:
 	return r;
 }
 
-static void panel_dvi_power_off(struct omap_dss_device *dssdev)
+static void tfp410_power_off(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
@@ -88,9 +88,9 @@ static void panel_dvi_power_off(struct omap_dss_device *dssdev)
 	omapdss_dpi_display_disable(dssdev);
 }
 
-static int panel_dvi_probe(struct omap_dss_device *dssdev)
+static int tfp410_probe(struct omap_dss_device *dssdev)
 {
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct panel_drv_data *ddata;
 	int r;
 
@@ -98,7 +98,7 @@ static int panel_dvi_probe(struct omap_dss_device *dssdev)
 	if (!ddata)
 		return -ENOMEM;
 
-	dssdev->panel.timings = panel_dvi_default_timings;
+	dssdev->panel.timings = tfp410_default_timings;
 	dssdev->panel.config = OMAP_DSS_LCD_TFT;
 
 	ddata->dssdev = dssdev;
@@ -124,7 +124,7 @@ static int panel_dvi_probe(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void __exit panel_dvi_remove(struct omap_dss_device *dssdev)
+static void __exit tfp410_remove(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
@@ -140,14 +140,14 @@ static void __exit panel_dvi_remove(struct omap_dss_device *dssdev)
 	kfree(ddata);
 }
 
-static int panel_dvi_enable(struct omap_dss_device *dssdev)
+static int tfp410_enable(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	int r;
 
 	mutex_lock(&ddata->lock);
 
-	r = panel_dvi_power_on(dssdev);
+	r = tfp410_power_on(dssdev);
 	if (r == 0)
 		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -156,26 +156,26 @@ static int panel_dvi_enable(struct omap_dss_device *dssdev)
 	return r;
 }
 
-static void panel_dvi_disable(struct omap_dss_device *dssdev)
+static void tfp410_disable(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
 	mutex_lock(&ddata->lock);
 
-	panel_dvi_power_off(dssdev);
+	tfp410_power_off(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 
 	mutex_unlock(&ddata->lock);
 }
 
-static int panel_dvi_suspend(struct omap_dss_device *dssdev)
+static int tfp410_suspend(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
 	mutex_lock(&ddata->lock);
 
-	panel_dvi_power_off(dssdev);
+	tfp410_power_off(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
@@ -184,14 +184,14 @@ static int panel_dvi_suspend(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int panel_dvi_resume(struct omap_dss_device *dssdev)
+static int tfp410_resume(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	int r;
 
 	mutex_lock(&ddata->lock);
 
-	r = panel_dvi_power_on(dssdev);
+	r = tfp410_power_on(dssdev);
 	if (r == 0)
 		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -200,7 +200,7 @@ static int panel_dvi_resume(struct omap_dss_device *dssdev)
 	return r;
 }
 
-static void panel_dvi_set_timings(struct omap_dss_device *dssdev,
+static void tfp410_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
@@ -210,7 +210,7 @@ static void panel_dvi_set_timings(struct omap_dss_device *dssdev,
 	mutex_unlock(&ddata->lock);
 }
 
-static void panel_dvi_get_timings(struct omap_dss_device *dssdev,
+static void tfp410_get_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
@@ -220,7 +220,7 @@ static void panel_dvi_get_timings(struct omap_dss_device *dssdev,
 	mutex_unlock(&ddata->lock);
 }
 
-static int panel_dvi_check_timings(struct omap_dss_device *dssdev,
+static int tfp410_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
@@ -234,7 +234,7 @@ static int panel_dvi_check_timings(struct omap_dss_device *dssdev,
 }
 
 
-static int panel_dvi_ddc_read(struct i2c_adapter *adapter,
+static int tfp410_ddc_read(struct i2c_adapter *adapter,
 		unsigned char *buf, u16 count, u8 offset)
 {
 	int r, retries;
@@ -265,11 +265,11 @@ static int panel_dvi_ddc_read(struct i2c_adapter *adapter,
 	return r < 0 ? r : -EIO;
 }
 
-static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
+static int tfp410_read_edid(struct omap_dss_device *dssdev,
 		u8 *edid, int len)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct i2c_adapter *adapter;
 	int r, l, bytes_read;
 
@@ -289,7 +289,7 @@ static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
 	}
 
 	l = min(EDID_LENGTH, len);
-	r = panel_dvi_ddc_read(adapter, edid, l, 0);
+	r = tfp410_ddc_read(adapter, edid, l, 0);
 	if (r)
 		goto err;
 
@@ -299,7 +299,7 @@ static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
 	if (len > EDID_LENGTH && edid[0x7e] > 0) {
 		l = min(EDID_LENGTH, len - EDID_LENGTH);
 
-		r = panel_dvi_ddc_read(adapter, edid + EDID_LENGTH,
+		r = tfp410_ddc_read(adapter, edid + EDID_LENGTH,
 				l, EDID_LENGTH);
 		if (r)
 			goto err;
@@ -316,10 +316,10 @@ err:
 	return r;
 }
 
-static bool panel_dvi_detect(struct omap_dss_device *dssdev)
+static bool tfp410_detect(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct i2c_adapter *adapter;
 	unsigned char out;
 	int r;
@@ -333,7 +333,7 @@ static bool panel_dvi_detect(struct omap_dss_device *dssdev)
 	if (!adapter)
 		goto out;
 
-	r = panel_dvi_ddc_read(adapter, &out, 1, 0);
+	r = tfp410_ddc_read(adapter, &out, 1, 0);
 
 	mutex_unlock(&ddata->lock);
 
@@ -344,38 +344,38 @@ out:
 	return true;
 }
 
-static struct omap_dss_driver panel_dvi_driver = {
-	.probe		= panel_dvi_probe,
-	.remove		= __exit_p(panel_dvi_remove),
+static struct omap_dss_driver tfp410_driver = {
+	.probe		= tfp410_probe,
+	.remove		= __exit_p(tfp410_remove),
 
-	.enable		= panel_dvi_enable,
-	.disable	= panel_dvi_disable,
-	.suspend	= panel_dvi_suspend,
-	.resume		= panel_dvi_resume,
+	.enable		= tfp410_enable,
+	.disable	= tfp410_disable,
+	.suspend	= tfp410_suspend,
+	.resume		= tfp410_resume,
 
-	.set_timings	= panel_dvi_set_timings,
-	.get_timings	= panel_dvi_get_timings,
-	.check_timings	= panel_dvi_check_timings,
+	.set_timings	= tfp410_set_timings,
+	.get_timings	= tfp410_get_timings,
+	.check_timings	= tfp410_check_timings,
 
-	.read_edid	= panel_dvi_read_edid,
-	.detect		= panel_dvi_detect,
+	.read_edid	= tfp410_read_edid,
+	.detect		= tfp410_detect,
 
 	.driver         = {
-		.name   = "dvi",
+		.name   = "tfp410",
 		.owner  = THIS_MODULE,
 	},
 };
 
-static int __init panel_dvi_init(void)
+static int __init tfp410_init(void)
 {
-	return omap_dss_register_driver(&panel_dvi_driver);
+	return omap_dss_register_driver(&tfp410_driver);
 }
 
-static void __exit panel_dvi_exit(void)
+static void __exit tfp410_exit(void)
 {
-	omap_dss_unregister_driver(&panel_dvi_driver);
+	omap_dss_unregister_driver(&tfp410_driver);
 }
 
-module_init(panel_dvi_init);
-module_exit(panel_dvi_exit);
+module_init(tfp410_init);
+module_exit(tfp410_exit);
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From dac8eb5f1d29eb4cf44305239da7e7a477e48a90 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 22 Dec 2011 11:12:13 +0200
Subject: OMAPDSS: TFP410: rename dvi files to tfp410

Now that the tfp410 driver has been renamed in the code, this patch
finishes the renaming by renaming the files.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/displays/Makefile       |   2 +-
 drivers/video/omap2/displays/panel-dvi.c    | 381 ----------------------------
 drivers/video/omap2/displays/panel-tfp410.c | 381 ++++++++++++++++++++++++++++
 3 files changed, 382 insertions(+), 382 deletions(-)
 delete mode 100644 drivers/video/omap2/displays/panel-dvi.c
 create mode 100644 drivers/video/omap2/displays/panel-tfp410.c

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 58905ef010c6..58a5176b07b0 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
-obj-$(CONFIG_PANEL_TFP410) += panel-dvi.o
+obj-$(CONFIG_PANEL_TFP410) += panel-tfp410.o
 obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-dvi.c
deleted file mode 100644
index e6d6849a27de..000000000000
--- a/drivers/video/omap2/displays/panel-dvi.c
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * TFP410 DPI-to-DVI chip
- *
- * Copyright (C) 2011 Texas Instruments Inc
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <video/omapdss.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <drm/drm_edid.h>
-
-#include <video/omap-panel-dvi.h>
-
-static const struct omap_video_timings tfp410_default_timings = {
-	.x_res		= 640,
-	.y_res		= 480,
-
-	.pixel_clock	= 23500,
-
-	.hfp		= 48,
-	.hsw		= 32,
-	.hbp		= 80,
-
-	.vfp		= 3,
-	.vsw		= 4,
-	.vbp		= 7,
-};
-
-struct panel_drv_data {
-	struct omap_dss_device *dssdev;
-
-	struct mutex lock;
-
-	int pd_gpio;
-};
-
-static inline struct tfp410_platform_data
-*get_pdata(const struct omap_dss_device *dssdev)
-{
-	return dssdev->data;
-}
-
-static int tfp410_power_on(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value(ddata->pd_gpio, 1);
-
-	return 0;
-err0:
-	return r;
-}
-
-static void tfp410_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value(ddata->pd_gpio, 0);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int tfp410_probe(struct omap_dss_device *dssdev)
-{
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
-	struct panel_drv_data *ddata;
-	int r;
-
-	ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	dssdev->panel.timings = tfp410_default_timings;
-	dssdev->panel.config = OMAP_DSS_LCD_TFT;
-
-	ddata->dssdev = dssdev;
-	mutex_init(&ddata->lock);
-
-	if (pdata)
-		ddata->pd_gpio = pdata->power_down_gpio;
-	else
-		ddata->pd_gpio = -1;
-
-	if (gpio_is_valid(ddata->pd_gpio)) {
-		r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
-				"tfp410 pd");
-		if (r) {
-			dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
-					ddata->pd_gpio);
-			ddata->pd_gpio = -1;
-		}
-	}
-
-	dev_set_drvdata(&dssdev->dev, ddata);
-
-	return 0;
-}
-
-static void __exit tfp410_remove(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_free(ddata->pd_gpio);
-
-	dev_set_drvdata(&dssdev->dev, NULL);
-
-	mutex_unlock(&ddata->lock);
-
-	kfree(ddata);
-}
-
-static int tfp410_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	r = tfp410_power_on(dssdev);
-	if (r == 0)
-		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-static void tfp410_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-
-	tfp410_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	mutex_unlock(&ddata->lock);
-}
-
-static int tfp410_suspend(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-
-	tfp410_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-
-	mutex_unlock(&ddata->lock);
-
-	return 0;
-}
-
-static int tfp410_resume(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	r = tfp410_power_on(dssdev);
-	if (r == 0)
-		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-static void tfp410_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-	dpi_set_timings(dssdev, timings);
-	mutex_unlock(&ddata->lock);
-}
-
-static void tfp410_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-
-	mutex_lock(&ddata->lock);
-	*timings = dssdev->panel.timings;
-	mutex_unlock(&ddata->lock);
-}
-
-static int tfp410_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	int r;
-
-	mutex_lock(&ddata->lock);
-	r = dpi_check_timings(dssdev, timings);
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-
-static int tfp410_ddc_read(struct i2c_adapter *adapter,
-		unsigned char *buf, u16 count, u8 offset)
-{
-	int r, retries;
-
-	for (retries = 3; retries > 0; retries--) {
-		struct i2c_msg msgs[] = {
-			{
-				.addr   = DDC_ADDR,
-				.flags  = 0,
-				.len    = 1,
-				.buf    = &offset,
-			}, {
-				.addr   = DDC_ADDR,
-				.flags  = I2C_M_RD,
-				.len    = count,
-				.buf    = buf,
-			}
-		};
-
-		r = i2c_transfer(adapter, msgs, 2);
-		if (r == 2)
-			return 0;
-
-		if (r != -EAGAIN)
-			break;
-	}
-
-	return r < 0 ? r : -EIO;
-}
-
-static int tfp410_read_edid(struct omap_dss_device *dssdev,
-		u8 *edid, int len)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
-	struct i2c_adapter *adapter;
-	int r, l, bytes_read;
-
-	mutex_lock(&ddata->lock);
-
-	if (pdata->i2c_bus_num == 0) {
-		r = -ENODEV;
-		goto err;
-	}
-
-	adapter = i2c_get_adapter(pdata->i2c_bus_num);
-	if (!adapter) {
-		dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
-				pdata->i2c_bus_num);
-		r = -EINVAL;
-		goto err;
-	}
-
-	l = min(EDID_LENGTH, len);
-	r = tfp410_ddc_read(adapter, edid, l, 0);
-	if (r)
-		goto err;
-
-	bytes_read = l;
-
-	/* if there are extensions, read second block */
-	if (len > EDID_LENGTH && edid[0x7e] > 0) {
-		l = min(EDID_LENGTH, len - EDID_LENGTH);
-
-		r = tfp410_ddc_read(adapter, edid + EDID_LENGTH,
-				l, EDID_LENGTH);
-		if (r)
-			goto err;
-
-		bytes_read += l;
-	}
-
-	mutex_unlock(&ddata->lock);
-
-	return bytes_read;
-
-err:
-	mutex_unlock(&ddata->lock);
-	return r;
-}
-
-static bool tfp410_detect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
-	struct i2c_adapter *adapter;
-	unsigned char out;
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	if (pdata->i2c_bus_num == 0)
-		goto out;
-
-	adapter = i2c_get_adapter(pdata->i2c_bus_num);
-	if (!adapter)
-		goto out;
-
-	r = tfp410_ddc_read(adapter, &out, 1, 0);
-
-	mutex_unlock(&ddata->lock);
-
-	return r == 0;
-
-out:
-	mutex_unlock(&ddata->lock);
-	return true;
-}
-
-static struct omap_dss_driver tfp410_driver = {
-	.probe		= tfp410_probe,
-	.remove		= __exit_p(tfp410_remove),
-
-	.enable		= tfp410_enable,
-	.disable	= tfp410_disable,
-	.suspend	= tfp410_suspend,
-	.resume		= tfp410_resume,
-
-	.set_timings	= tfp410_set_timings,
-	.get_timings	= tfp410_get_timings,
-	.check_timings	= tfp410_check_timings,
-
-	.read_edid	= tfp410_read_edid,
-	.detect		= tfp410_detect,
-
-	.driver         = {
-		.name   = "tfp410",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init tfp410_init(void)
-{
-	return omap_dss_register_driver(&tfp410_driver);
-}
-
-static void __exit tfp410_exit(void)
-{
-	omap_dss_unregister_driver(&tfp410_driver);
-}
-
-module_init(tfp410_init);
-module_exit(tfp410_exit);
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
new file mode 100644
index 000000000000..52637fa8fda8
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -0,0 +1,381 @@
+/*
+ * TFP410 DPI-to-DVI chip
+ *
+ * Copyright (C) 2011 Texas Instruments Inc
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <video/omapdss.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <drm/drm_edid.h>
+
+#include <video/omap-panel-tfp410.h>
+
+static const struct omap_video_timings tfp410_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+
+	.pixel_clock	= 23500,
+
+	.hfp		= 48,
+	.hsw		= 32,
+	.hbp		= 80,
+
+	.vfp		= 3,
+	.vsw		= 4,
+	.vbp		= 7,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device *dssdev;
+
+	struct mutex lock;
+
+	int pd_gpio;
+};
+
+static inline struct tfp410_platform_data
+*get_pdata(const struct omap_dss_device *dssdev)
+{
+	return dssdev->data;
+}
+
+static int tfp410_power_on(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r)
+		goto err0;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value(ddata->pd_gpio, 1);
+
+	return 0;
+err0:
+	return r;
+}
+
+static void tfp410_power_off(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value(ddata->pd_gpio, 0);
+
+	omapdss_dpi_display_disable(dssdev);
+}
+
+static int tfp410_probe(struct omap_dss_device *dssdev)
+{
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
+	struct panel_drv_data *ddata;
+	int r;
+
+	ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	dssdev->panel.timings = tfp410_default_timings;
+	dssdev->panel.config = OMAP_DSS_LCD_TFT;
+
+	ddata->dssdev = dssdev;
+	mutex_init(&ddata->lock);
+
+	if (pdata)
+		ddata->pd_gpio = pdata->power_down_gpio;
+	else
+		ddata->pd_gpio = -1;
+
+	if (gpio_is_valid(ddata->pd_gpio)) {
+		r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
+				"tfp410 pd");
+		if (r) {
+			dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
+					ddata->pd_gpio);
+			ddata->pd_gpio = -1;
+		}
+	}
+
+	dev_set_drvdata(&dssdev->dev, ddata);
+
+	return 0;
+}
+
+static void __exit tfp410_remove(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&ddata->lock);
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_free(ddata->pd_gpio);
+
+	dev_set_drvdata(&dssdev->dev, NULL);
+
+	mutex_unlock(&ddata->lock);
+
+	kfree(ddata);
+}
+
+static int tfp410_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&ddata->lock);
+
+	r = tfp410_power_on(dssdev);
+	if (r == 0)
+		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+static void tfp410_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&ddata->lock);
+
+	tfp410_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	mutex_unlock(&ddata->lock);
+}
+
+static int tfp410_suspend(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&ddata->lock);
+
+	tfp410_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+	mutex_unlock(&ddata->lock);
+
+	return 0;
+}
+
+static int tfp410_resume(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&ddata->lock);
+
+	r = tfp410_power_on(dssdev);
+	if (r == 0)
+		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+static void tfp410_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&ddata->lock);
+	dpi_set_timings(dssdev, timings);
+	mutex_unlock(&ddata->lock);
+}
+
+static void tfp410_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&ddata->lock);
+	*timings = dssdev->panel.timings;
+	mutex_unlock(&ddata->lock);
+}
+
+static int tfp410_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&ddata->lock);
+	r = dpi_check_timings(dssdev, timings);
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+
+static int tfp410_ddc_read(struct i2c_adapter *adapter,
+		unsigned char *buf, u16 count, u8 offset)
+{
+	int r, retries;
+
+	for (retries = 3; retries > 0; retries--) {
+		struct i2c_msg msgs[] = {
+			{
+				.addr   = DDC_ADDR,
+				.flags  = 0,
+				.len    = 1,
+				.buf    = &offset,
+			}, {
+				.addr   = DDC_ADDR,
+				.flags  = I2C_M_RD,
+				.len    = count,
+				.buf    = buf,
+			}
+		};
+
+		r = i2c_transfer(adapter, msgs, 2);
+		if (r == 2)
+			return 0;
+
+		if (r != -EAGAIN)
+			break;
+	}
+
+	return r < 0 ? r : -EIO;
+}
+
+static int tfp410_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
+	struct i2c_adapter *adapter;
+	int r, l, bytes_read;
+
+	mutex_lock(&ddata->lock);
+
+	if (pdata->i2c_bus_num == 0) {
+		r = -ENODEV;
+		goto err;
+	}
+
+	adapter = i2c_get_adapter(pdata->i2c_bus_num);
+	if (!adapter) {
+		dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
+				pdata->i2c_bus_num);
+		r = -EINVAL;
+		goto err;
+	}
+
+	l = min(EDID_LENGTH, len);
+	r = tfp410_ddc_read(adapter, edid, l, 0);
+	if (r)
+		goto err;
+
+	bytes_read = l;
+
+	/* if there are extensions, read second block */
+	if (len > EDID_LENGTH && edid[0x7e] > 0) {
+		l = min(EDID_LENGTH, len - EDID_LENGTH);
+
+		r = tfp410_ddc_read(adapter, edid + EDID_LENGTH,
+				l, EDID_LENGTH);
+		if (r)
+			goto err;
+
+		bytes_read += l;
+	}
+
+	mutex_unlock(&ddata->lock);
+
+	return bytes_read;
+
+err:
+	mutex_unlock(&ddata->lock);
+	return r;
+}
+
+static bool tfp410_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
+	struct i2c_adapter *adapter;
+	unsigned char out;
+	int r;
+
+	mutex_lock(&ddata->lock);
+
+	if (pdata->i2c_bus_num == 0)
+		goto out;
+
+	adapter = i2c_get_adapter(pdata->i2c_bus_num);
+	if (!adapter)
+		goto out;
+
+	r = tfp410_ddc_read(adapter, &out, 1, 0);
+
+	mutex_unlock(&ddata->lock);
+
+	return r == 0;
+
+out:
+	mutex_unlock(&ddata->lock);
+	return true;
+}
+
+static struct omap_dss_driver tfp410_driver = {
+	.probe		= tfp410_probe,
+	.remove		= __exit_p(tfp410_remove),
+
+	.enable		= tfp410_enable,
+	.disable	= tfp410_disable,
+	.suspend	= tfp410_suspend,
+	.resume		= tfp410_resume,
+
+	.set_timings	= tfp410_set_timings,
+	.get_timings	= tfp410_get_timings,
+	.check_timings	= tfp410_check_timings,
+
+	.read_edid	= tfp410_read_edid,
+	.detect		= tfp410_detect,
+
+	.driver         = {
+		.name   = "tfp410",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init tfp410_init(void)
+{
+	return omap_dss_register_driver(&tfp410_driver);
+}
+
+static void __exit tfp410_exit(void)
+{
+	omap_dss_unregister_driver(&tfp410_driver);
+}
+
+module_init(tfp410_init);
+module_exit(tfp410_exit);
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 3acc797c1db2eb873b13a07f21fe9572af4b78ee Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 20 Feb 2012 12:18:52 +0200
Subject: OMAPDSS: Taal: move reset gpio handling to taal driver

The reset GPIO for Taal panel driver is currently requested in the
4430sdp board file. This patch moves the gpio request/free into the Taal
driver, where it should be.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/displays/panel-taal.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 0f21fa5a16ae..0888162e9ce9 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -993,6 +993,15 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	dev_set_drvdata(&dssdev->dev, td);
 
+	if (gpio_is_valid(panel_data->reset_gpio)) {
+		r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW,
+				"taal rst");
+		if (r) {
+			dev_err(&dssdev->dev, "failed to request reset gpio\n");
+			goto err_rst_gpio;
+		}
+	}
+
 	taal_hw_reset(dssdev);
 
 	if (panel_data->use_dsi_backlight) {
@@ -1073,6 +1082,9 @@ err_gpio:
 	if (bldev != NULL)
 		backlight_device_unregister(bldev);
 err_bl:
+	if (gpio_is_valid(panel_data->reset_gpio))
+		gpio_free(panel_data->reset_gpio);
+err_rst_gpio:
 	destroy_workqueue(td->workqueue);
 err_wq:
 	free_regulators(panel_config->regulators, panel_config->num_regulators);
@@ -1116,6 +1128,9 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 	free_regulators(td->panel_config->regulators,
 			td->panel_config->num_regulators);
 
+	if (gpio_is_valid(panel_data->reset_gpio))
+		gpio_free(panel_data->reset_gpio);
+
 	kfree(td);
 }
 
-- 
cgit v1.2.3


From e4a9e94cc58ed6e4efb02b80be3a9bf57f448d07 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 28 Mar 2012 15:58:56 +0300
Subject: OMAPDSS: DSI: implement generic DSI pin config

In preparation for device tree, this patch changes how the DSI pins are
configured. The current configuration method is only doable with board
files and the configuration data is OMAP specific.

This patch moves the configuration data to the panel's platform data,
and the data can easily be given via DT in the future. The configuration
data format is also changed to a generic one which should be suitable
for all platforms.

The new format is an array of pin numbers, where the array items start
from clock + and -, then data1 + and -, and so on. For example:

{
	0,	// pin num for clock lane +
	1,	// pin num for clock lane -
	2,	// pin num for data1 lane +
	3,	// pin num for data1 lane -
	...
}

The pin numbers are translated by the DSI driver and used to configure
the hardware appropriately.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/displays/panel-taal.c |   7 ++
 drivers/video/omap2/dss/dsi.c             | 133 +++++++++++++++---------------
 2 files changed, 75 insertions(+), 65 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 0888162e9ce9..b2dd88b48420 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1137,9 +1137,16 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 static int taal_power_on(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	u8 id1, id2, id3;
 	int r;
 
+	r = omapdss_dsi_configure_pins(dssdev, &panel_data->pin_config);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to configure DSI pins\n");
+		goto err0;
+	};
+
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 662d14f8c2c3..210a3c4f6150 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2076,65 +2076,6 @@ static unsigned dsi_get_line_buf_size(struct platform_device *dsidev)
 	}
 }
 
-static int dsi_parse_lane_config(struct omap_dss_device *dssdev)
-{
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-	u8 lanes[DSI_MAX_NR_LANES];
-	u8 polarities[DSI_MAX_NR_LANES];
-	int num_lanes, i;
-
-	static const enum dsi_lane_function functions[] = {
-		DSI_LANE_CLK,
-		DSI_LANE_DATA1,
-		DSI_LANE_DATA2,
-		DSI_LANE_DATA3,
-		DSI_LANE_DATA4,
-	};
-
-	lanes[0] = dssdev->phy.dsi.clk_lane;
-	lanes[1] = dssdev->phy.dsi.data1_lane;
-	lanes[2] = dssdev->phy.dsi.data2_lane;
-	lanes[3] = dssdev->phy.dsi.data3_lane;
-	lanes[4] = dssdev->phy.dsi.data4_lane;
-	polarities[0] = dssdev->phy.dsi.clk_pol;
-	polarities[1] = dssdev->phy.dsi.data1_pol;
-	polarities[2] = dssdev->phy.dsi.data2_pol;
-	polarities[3] = dssdev->phy.dsi.data3_pol;
-	polarities[4] = dssdev->phy.dsi.data4_pol;
-
-	num_lanes = 0;
-
-	for (i = 0; i < dsi->num_lanes_supported; ++i)
-		dsi->lanes[i].function = DSI_LANE_UNUSED;
-
-	for (i = 0; i < dsi->num_lanes_supported; ++i) {
-		int num;
-
-		if (lanes[i] == DSI_LANE_UNUSED)
-			break;
-
-		num = lanes[i] - 1;
-
-		if (num >= dsi->num_lanes_supported)
-			return -EINVAL;
-
-		if (dsi->lanes[num].function != DSI_LANE_UNUSED)
-			return -EINVAL;
-
-		dsi->lanes[num].function = functions[i];
-		dsi->lanes[num].polarity = polarities[i];
-		num_lanes++;
-	}
-
-	if (num_lanes < 2 || num_lanes > dsi->num_lanes_supported)
-		return -EINVAL;
-
-	dsi->num_lanes_used = num_lanes;
-
-	return 0;
-}
-
 static int dsi_set_lane_config(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -3975,6 +3916,74 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 	}
 }
 
+int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
+		const struct omap_dsi_pin_config *pin_cfg)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	int num_pins;
+	const int *pins;
+	struct dsi_lane_config lanes[DSI_MAX_NR_LANES];
+	int num_lanes;
+	int i;
+
+	static const enum dsi_lane_function functions[] = {
+		DSI_LANE_CLK,
+		DSI_LANE_DATA1,
+		DSI_LANE_DATA2,
+		DSI_LANE_DATA3,
+		DSI_LANE_DATA4,
+	};
+
+	num_pins = pin_cfg->num_pins;
+	pins = pin_cfg->pins;
+
+	if (num_pins < 4 || num_pins > dsi->num_lanes_supported * 2
+			|| num_pins % 2 != 0)
+		return -EINVAL;
+
+	for (i = 0; i < DSI_MAX_NR_LANES; ++i)
+		lanes[i].function = DSI_LANE_UNUSED;
+
+	num_lanes = 0;
+
+	for (i = 0; i < num_pins; i += 2) {
+		u8 lane, pol;
+		int dx, dy;
+
+		dx = pins[i];
+		dy = pins[i + 1];
+
+		if (dx < 0 || dx >= dsi->num_lanes_supported * 2)
+			return -EINVAL;
+
+		if (dy < 0 || dy >= dsi->num_lanes_supported * 2)
+			return -EINVAL;
+
+		if (dx & 1) {
+			if (dy != dx - 1)
+				return -EINVAL;
+			pol = 1;
+		} else {
+			if (dy != dx + 1)
+				return -EINVAL;
+			pol = 0;
+		}
+
+		lane = dx / 2;
+
+		lanes[lane].function = functions[i / 2];
+		lanes[lane].polarity = pol;
+		num_lanes++;
+	}
+
+	memcpy(dsi->lanes, lanes, sizeof(dsi->lanes));
+	dsi->num_lanes_used = num_lanes;
+
+	return 0;
+}
+EXPORT_SYMBOL(omapdss_dsi_configure_pins);
+
 int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -4339,12 +4348,6 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 	int dsi_module = dsi_get_dsidev_id(dsidev);
 	int r;
 
-	r = dsi_parse_lane_config(dssdev);
-	if (r) {
-		DSSERR("illegal lane config");
-		goto err0;
-	}
-
 	r = dsi_pll_init(dsidev, true, true);
 	if (r)
 		goto err0;
-- 
cgit v1.2.3


From 3c7de24771cbc4546728875dc77016bbfc0195df Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 7 May 2012 18:50:27 +0530
Subject: OMAPDSS: HDMI: Fix ti_hdmi_4xxx_core_dump

The function ti_hdmi_4xxx_core_dump has some bugs, the following mention the
bugs and the solutions:

- The macros DUMPCORE and DUMPCOREAV in ti_hdmi_4xxx_core_dump() use
  hdmi_pll_base() for the offsets needed to calculate register addresses, use
  functions hdmi_core_sys_base() amd hdmi_av_base() to calculate the correct
  offsets for CORE_SYS and CORE_AV registers.

- Many of the CORE_AV registers use the DUMPCORE macro, and hence the register
  addresses are calculated incorrectly. Rename the current DUMPCOREAV macro as
  DUMPCOREAV2 as it takes 2 arguments to dump indexed CORE_AV registers, create
  a new macro called DUMPCOREAV which is now used for dumping non-indexed
  CORE_AV registers.

Thanks to Ancy Tom <ancytom@gmail.com> for pointing out the issues.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 142 +++++++++++++++---------------
 1 file changed, 72 insertions(+), 70 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index bfe6fe65c8be..e266b8e1aa9f 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -886,10 +886,12 @@ void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
 
 #define CORE_REG(i, name) name(i)
 #define DUMPCORE(r) seq_printf(s, "%-35s %08x\n", #r,\
-		hdmi_read_reg(hdmi_pll_base(ip_data), r))
-#define DUMPCOREAV(i, r) seq_printf(s, "%s[%d]%*s %08x\n", #r, i, \
+		hdmi_read_reg(hdmi_core_sys_base(ip_data), r))
+#define DUMPCOREAV(r) seq_printf(s, "%-35s %08x\n", #r,\
+		hdmi_read_reg(hdmi_av_base(ip_data), r))
+#define DUMPCOREAV2(i, r) seq_printf(s, "%s[%d]%*s %08x\n", #r, i, \
 		(i < 10) ? 32 - strlen(#r) : 31 - strlen(#r), " ", \
-		hdmi_read_reg(hdmi_pll_base(ip_data), CORE_REG(i, r)))
+		hdmi_read_reg(hdmi_av_base(ip_data), CORE_REG(i, r)))
 
 	DUMPCORE(HDMI_CORE_SYS_VND_IDL);
 	DUMPCORE(HDMI_CORE_SYS_DEV_IDL);
@@ -924,85 +926,85 @@ void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
 	DUMPCORE(HDMI_CORE_DDC_DATA);
 	DUMPCORE(HDMI_CORE_DDC_SEGM);
 
-	DUMPCORE(HDMI_CORE_AV_HDMI_CTRL);
-	DUMPCORE(HDMI_CORE_AV_DPD);
-	DUMPCORE(HDMI_CORE_AV_PB_CTRL1);
-	DUMPCORE(HDMI_CORE_AV_PB_CTRL2);
-	DUMPCORE(HDMI_CORE_AV_AVI_TYPE);
-	DUMPCORE(HDMI_CORE_AV_AVI_VERS);
-	DUMPCORE(HDMI_CORE_AV_AVI_LEN);
-	DUMPCORE(HDMI_CORE_AV_AVI_CHSUM);
+	DUMPCOREAV(HDMI_CORE_AV_HDMI_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_DPD);
+	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL1);
+	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL2);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_CHSUM);
 
 	for (i = 0; i < HDMI_CORE_AV_AVI_DBYTE_NELEMS; i++)
-		DUMPCOREAV(i, HDMI_CORE_AV_AVI_DBYTE);
+		DUMPCOREAV2(i, HDMI_CORE_AV_AVI_DBYTE);
 
 	for (i = 0; i < HDMI_CORE_AV_SPD_DBYTE_NELEMS; i++)
-		DUMPCOREAV(i, HDMI_CORE_AV_SPD_DBYTE);
+		DUMPCOREAV2(i, HDMI_CORE_AV_SPD_DBYTE);
 
 	for (i = 0; i < HDMI_CORE_AV_AUD_DBYTE_NELEMS; i++)
-		DUMPCOREAV(i, HDMI_CORE_AV_AUD_DBYTE);
+		DUMPCOREAV2(i, HDMI_CORE_AV_AUD_DBYTE);
 
 	for (i = 0; i < HDMI_CORE_AV_MPEG_DBYTE_NELEMS; i++)
-		DUMPCOREAV(i, HDMI_CORE_AV_MPEG_DBYTE);
+		DUMPCOREAV2(i, HDMI_CORE_AV_MPEG_DBYTE);
 
 	for (i = 0; i < HDMI_CORE_AV_GEN_DBYTE_NELEMS; i++)
-		DUMPCOREAV(i, HDMI_CORE_AV_GEN_DBYTE);
+		DUMPCOREAV2(i, HDMI_CORE_AV_GEN_DBYTE);
 
 	for (i = 0; i < HDMI_CORE_AV_GEN2_DBYTE_NELEMS; i++)
-		DUMPCOREAV(i, HDMI_CORE_AV_GEN2_DBYTE);
-
-	DUMPCORE(HDMI_CORE_AV_ACR_CTRL);
-	DUMPCORE(HDMI_CORE_AV_FREQ_SVAL);
-	DUMPCORE(HDMI_CORE_AV_N_SVAL1);
-	DUMPCORE(HDMI_CORE_AV_N_SVAL2);
-	DUMPCORE(HDMI_CORE_AV_N_SVAL3);
-	DUMPCORE(HDMI_CORE_AV_CTS_SVAL1);
-	DUMPCORE(HDMI_CORE_AV_CTS_SVAL2);
-	DUMPCORE(HDMI_CORE_AV_CTS_SVAL3);
-	DUMPCORE(HDMI_CORE_AV_CTS_HVAL1);
-	DUMPCORE(HDMI_CORE_AV_CTS_HVAL2);
-	DUMPCORE(HDMI_CORE_AV_CTS_HVAL3);
-	DUMPCORE(HDMI_CORE_AV_AUD_MODE);
-	DUMPCORE(HDMI_CORE_AV_SPDIF_CTRL);
-	DUMPCORE(HDMI_CORE_AV_HW_SPDIF_FS);
-	DUMPCORE(HDMI_CORE_AV_SWAP_I2S);
-	DUMPCORE(HDMI_CORE_AV_SPDIF_ERTH);
-	DUMPCORE(HDMI_CORE_AV_I2S_IN_MAP);
-	DUMPCORE(HDMI_CORE_AV_I2S_IN_CTRL);
-	DUMPCORE(HDMI_CORE_AV_I2S_CHST0);
-	DUMPCORE(HDMI_CORE_AV_I2S_CHST1);
-	DUMPCORE(HDMI_CORE_AV_I2S_CHST2);
-	DUMPCORE(HDMI_CORE_AV_I2S_CHST4);
-	DUMPCORE(HDMI_CORE_AV_I2S_CHST5);
-	DUMPCORE(HDMI_CORE_AV_ASRC);
-	DUMPCORE(HDMI_CORE_AV_I2S_IN_LEN);
-	DUMPCORE(HDMI_CORE_AV_HDMI_CTRL);
-	DUMPCORE(HDMI_CORE_AV_AUDO_TXSTAT);
-	DUMPCORE(HDMI_CORE_AV_AUD_PAR_BUSCLK_1);
-	DUMPCORE(HDMI_CORE_AV_AUD_PAR_BUSCLK_2);
-	DUMPCORE(HDMI_CORE_AV_AUD_PAR_BUSCLK_3);
-	DUMPCORE(HDMI_CORE_AV_TEST_TXCTRL);
-	DUMPCORE(HDMI_CORE_AV_DPD);
-	DUMPCORE(HDMI_CORE_AV_PB_CTRL1);
-	DUMPCORE(HDMI_CORE_AV_PB_CTRL2);
-	DUMPCORE(HDMI_CORE_AV_AVI_TYPE);
-	DUMPCORE(HDMI_CORE_AV_AVI_VERS);
-	DUMPCORE(HDMI_CORE_AV_AVI_LEN);
-	DUMPCORE(HDMI_CORE_AV_AVI_CHSUM);
-	DUMPCORE(HDMI_CORE_AV_SPD_TYPE);
-	DUMPCORE(HDMI_CORE_AV_SPD_VERS);
-	DUMPCORE(HDMI_CORE_AV_SPD_LEN);
-	DUMPCORE(HDMI_CORE_AV_SPD_CHSUM);
-	DUMPCORE(HDMI_CORE_AV_AUDIO_TYPE);
-	DUMPCORE(HDMI_CORE_AV_AUDIO_VERS);
-	DUMPCORE(HDMI_CORE_AV_AUDIO_LEN);
-	DUMPCORE(HDMI_CORE_AV_AUDIO_CHSUM);
-	DUMPCORE(HDMI_CORE_AV_MPEG_TYPE);
-	DUMPCORE(HDMI_CORE_AV_MPEG_VERS);
-	DUMPCORE(HDMI_CORE_AV_MPEG_LEN);
-	DUMPCORE(HDMI_CORE_AV_MPEG_CHSUM);
-	DUMPCORE(HDMI_CORE_AV_CP_BYTE1);
-	DUMPCORE(HDMI_CORE_AV_CEC_ADDR_ID);
+		DUMPCOREAV2(i, HDMI_CORE_AV_GEN2_DBYTE);
+
+	DUMPCOREAV(HDMI_CORE_AV_ACR_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_FREQ_SVAL);
+	DUMPCOREAV(HDMI_CORE_AV_N_SVAL1);
+	DUMPCOREAV(HDMI_CORE_AV_N_SVAL2);
+	DUMPCOREAV(HDMI_CORE_AV_N_SVAL3);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_SVAL1);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_SVAL2);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_SVAL3);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_HVAL1);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_HVAL2);
+	DUMPCOREAV(HDMI_CORE_AV_CTS_HVAL3);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_MODE);
+	DUMPCOREAV(HDMI_CORE_AV_SPDIF_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_HW_SPDIF_FS);
+	DUMPCOREAV(HDMI_CORE_AV_SWAP_I2S);
+	DUMPCOREAV(HDMI_CORE_AV_SPDIF_ERTH);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_IN_MAP);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_IN_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST0);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST1);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST2);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST4);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_CHST5);
+	DUMPCOREAV(HDMI_CORE_AV_ASRC);
+	DUMPCOREAV(HDMI_CORE_AV_I2S_IN_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_HDMI_CTRL);
+	DUMPCOREAV(HDMI_CORE_AV_AUDO_TXSTAT);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_PAR_BUSCLK_1);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_PAR_BUSCLK_2);
+	DUMPCOREAV(HDMI_CORE_AV_AUD_PAR_BUSCLK_3);
+	DUMPCOREAV(HDMI_CORE_AV_TEST_TXCTRL);
+	DUMPCOREAV(HDMI_CORE_AV_DPD);
+	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL1);
+	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL2);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_AVI_CHSUM);
+	DUMPCOREAV(HDMI_CORE_AV_SPD_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_SPD_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_SPD_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_SPD_CHSUM);
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_AUDIO_CHSUM);
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_TYPE);
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_VERS);
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_LEN);
+	DUMPCOREAV(HDMI_CORE_AV_MPEG_CHSUM);
+	DUMPCOREAV(HDMI_CORE_AV_CP_BYTE1);
+	DUMPCOREAV(HDMI_CORE_AV_CEC_ADDR_ID);
 }
 
 void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
-- 
cgit v1.2.3


From 9b9c457b43a0bfe227c5016606a2543e2ac4424e Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 7 May 2012 18:50:28 +0530
Subject: OMAPDSS: HDMI: define and dump CORE registers in correct order

The HDMI core register offset macros aren't defined in ascending order of their
values, some of the offset macros are also redefined. The same issues occur when
these core registers are dumped.

Clean up the ordering of HDMI core registers and remove repeated registers in
the definition in ti_hdmi_4xxx_ip.h and in ti_hdmi_4xxx_core_dump().

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 70 +++++++++++++++----------------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 57 ++++++++++++-------------
 2 files changed, 59 insertions(+), 68 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index e266b8e1aa9f..35f59e47d7fe 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -900,6 +900,13 @@ void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
 	DUMPCORE(HDMI_CORE_SYS_SRST);
 	DUMPCORE(HDMI_CORE_CTRL1);
 	DUMPCORE(HDMI_CORE_SYS_SYS_STAT);
+	DUMPCORE(HDMI_CORE_SYS_DE_DLY);
+	DUMPCORE(HDMI_CORE_SYS_DE_CTRL);
+	DUMPCORE(HDMI_CORE_SYS_DE_TOP);
+	DUMPCORE(HDMI_CORE_SYS_DE_CNTL);
+	DUMPCORE(HDMI_CORE_SYS_DE_CNTH);
+	DUMPCORE(HDMI_CORE_SYS_DE_LINL);
+	DUMPCORE(HDMI_CORE_SYS_DE_LINH_1);
 	DUMPCORE(HDMI_CORE_SYS_VID_ACEN);
 	DUMPCORE(HDMI_CORE_SYS_VID_MODE);
 	DUMPCORE(HDMI_CORE_SYS_INTR_STATE);
@@ -909,49 +916,15 @@ void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
 	DUMPCORE(HDMI_CORE_SYS_INTR4);
 	DUMPCORE(HDMI_CORE_SYS_UMASK1);
 	DUMPCORE(HDMI_CORE_SYS_TMDS_CTRL);
-	DUMPCORE(HDMI_CORE_SYS_DE_DLY);
-	DUMPCORE(HDMI_CORE_SYS_DE_CTRL);
-	DUMPCORE(HDMI_CORE_SYS_DE_TOP);
-	DUMPCORE(HDMI_CORE_SYS_DE_CNTL);
-	DUMPCORE(HDMI_CORE_SYS_DE_CNTH);
-	DUMPCORE(HDMI_CORE_SYS_DE_LINL);
-	DUMPCORE(HDMI_CORE_SYS_DE_LINH_1);
 
-	DUMPCORE(HDMI_CORE_DDC_CMD);
-	DUMPCORE(HDMI_CORE_DDC_STATUS);
 	DUMPCORE(HDMI_CORE_DDC_ADDR);
+	DUMPCORE(HDMI_CORE_DDC_SEGM);
 	DUMPCORE(HDMI_CORE_DDC_OFFSET);
 	DUMPCORE(HDMI_CORE_DDC_COUNT1);
 	DUMPCORE(HDMI_CORE_DDC_COUNT2);
+	DUMPCORE(HDMI_CORE_DDC_STATUS);
+	DUMPCORE(HDMI_CORE_DDC_CMD);
 	DUMPCORE(HDMI_CORE_DDC_DATA);
-	DUMPCORE(HDMI_CORE_DDC_SEGM);
-
-	DUMPCOREAV(HDMI_CORE_AV_HDMI_CTRL);
-	DUMPCOREAV(HDMI_CORE_AV_DPD);
-	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL1);
-	DUMPCOREAV(HDMI_CORE_AV_PB_CTRL2);
-	DUMPCOREAV(HDMI_CORE_AV_AVI_TYPE);
-	DUMPCOREAV(HDMI_CORE_AV_AVI_VERS);
-	DUMPCOREAV(HDMI_CORE_AV_AVI_LEN);
-	DUMPCOREAV(HDMI_CORE_AV_AVI_CHSUM);
-
-	for (i = 0; i < HDMI_CORE_AV_AVI_DBYTE_NELEMS; i++)
-		DUMPCOREAV2(i, HDMI_CORE_AV_AVI_DBYTE);
-
-	for (i = 0; i < HDMI_CORE_AV_SPD_DBYTE_NELEMS; i++)
-		DUMPCOREAV2(i, HDMI_CORE_AV_SPD_DBYTE);
-
-	for (i = 0; i < HDMI_CORE_AV_AUD_DBYTE_NELEMS; i++)
-		DUMPCOREAV2(i, HDMI_CORE_AV_AUD_DBYTE);
-
-	for (i = 0; i < HDMI_CORE_AV_MPEG_DBYTE_NELEMS; i++)
-		DUMPCOREAV2(i, HDMI_CORE_AV_MPEG_DBYTE);
-
-	for (i = 0; i < HDMI_CORE_AV_GEN_DBYTE_NELEMS; i++)
-		DUMPCOREAV2(i, HDMI_CORE_AV_GEN_DBYTE);
-
-	for (i = 0; i < HDMI_CORE_AV_GEN2_DBYTE_NELEMS; i++)
-		DUMPCOREAV2(i, HDMI_CORE_AV_GEN2_DBYTE);
 
 	DUMPCOREAV(HDMI_CORE_AV_ACR_CTRL);
 	DUMPCOREAV(HDMI_CORE_AV_FREQ_SVAL);
@@ -991,19 +964,42 @@ void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
 	DUMPCOREAV(HDMI_CORE_AV_AVI_VERS);
 	DUMPCOREAV(HDMI_CORE_AV_AVI_LEN);
 	DUMPCOREAV(HDMI_CORE_AV_AVI_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_AVI_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_AVI_DBYTE);
+
 	DUMPCOREAV(HDMI_CORE_AV_SPD_TYPE);
 	DUMPCOREAV(HDMI_CORE_AV_SPD_VERS);
 	DUMPCOREAV(HDMI_CORE_AV_SPD_LEN);
 	DUMPCOREAV(HDMI_CORE_AV_SPD_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_SPD_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_SPD_DBYTE);
+
 	DUMPCOREAV(HDMI_CORE_AV_AUDIO_TYPE);
 	DUMPCOREAV(HDMI_CORE_AV_AUDIO_VERS);
 	DUMPCOREAV(HDMI_CORE_AV_AUDIO_LEN);
 	DUMPCOREAV(HDMI_CORE_AV_AUDIO_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_AUD_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_AUD_DBYTE);
+
 	DUMPCOREAV(HDMI_CORE_AV_MPEG_TYPE);
 	DUMPCOREAV(HDMI_CORE_AV_MPEG_VERS);
 	DUMPCOREAV(HDMI_CORE_AV_MPEG_LEN);
 	DUMPCOREAV(HDMI_CORE_AV_MPEG_CHSUM);
+
+	for (i = 0; i < HDMI_CORE_AV_MPEG_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_MPEG_DBYTE);
+
+	for (i = 0; i < HDMI_CORE_AV_GEN_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_GEN_DBYTE);
+
 	DUMPCOREAV(HDMI_CORE_AV_CP_BYTE1);
+
+	for (i = 0; i < HDMI_CORE_AV_GEN2_DBYTE_NELEMS; i++)
+		DUMPCOREAV2(i, HDMI_CORE_AV_GEN2_DBYTE);
+
 	DUMPCOREAV(HDMI_CORE_AV_CEC_ADDR_ID);
 }
 
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index a14d1a0e6e41..b724bc68307a 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -57,6 +57,13 @@
 #define HDMI_CORE_SYS_SRST			0x14
 #define HDMI_CORE_CTRL1				0x20
 #define HDMI_CORE_SYS_SYS_STAT			0x24
+#define HDMI_CORE_SYS_DE_DLY			0xC8
+#define HDMI_CORE_SYS_DE_CTRL			0xCC
+#define HDMI_CORE_SYS_DE_TOP			0xD0
+#define HDMI_CORE_SYS_DE_CNTL			0xD8
+#define HDMI_CORE_SYS_DE_CNTH			0xDC
+#define HDMI_CORE_SYS_DE_LINL			0xE0
+#define HDMI_CORE_SYS_DE_LINH_1			0xE4
 #define HDMI_CORE_SYS_VID_ACEN			0x124
 #define HDMI_CORE_SYS_VID_MODE			0x128
 #define HDMI_CORE_SYS_INTR_STATE		0x1C0
@@ -66,50 +73,24 @@
 #define HDMI_CORE_SYS_INTR4			0x1D0
 #define HDMI_CORE_SYS_UMASK1			0x1D4
 #define HDMI_CORE_SYS_TMDS_CTRL			0x208
-#define HDMI_CORE_SYS_DE_DLY			0xC8
-#define HDMI_CORE_SYS_DE_CTRL			0xCC
-#define HDMI_CORE_SYS_DE_TOP			0xD0
-#define HDMI_CORE_SYS_DE_CNTL			0xD8
-#define HDMI_CORE_SYS_DE_CNTH			0xDC
-#define HDMI_CORE_SYS_DE_LINL			0xE0
-#define HDMI_CORE_SYS_DE_LINH_1			0xE4
+
 #define HDMI_CORE_CTRL1_VEN_FOLLOWVSYNC	0x1
 #define HDMI_CORE_CTRL1_HEN_FOLLOWHSYNC	0x1
-#define HDMI_CORE_CTRL1_BSEL_24BITBUS		0x1
+#define HDMI_CORE_CTRL1_BSEL_24BITBUS	0x1
 #define HDMI_CORE_CTRL1_EDGE_RISINGEDGE	0x1
 
 /* HDMI DDC E-DID */
-#define HDMI_CORE_DDC_CMD			0x3CC
-#define HDMI_CORE_DDC_STATUS			0x3C8
 #define HDMI_CORE_DDC_ADDR			0x3B4
+#define HDMI_CORE_DDC_SEGM			0x3B8
 #define HDMI_CORE_DDC_OFFSET			0x3BC
 #define HDMI_CORE_DDC_COUNT1			0x3C0
 #define HDMI_CORE_DDC_COUNT2			0x3C4
+#define HDMI_CORE_DDC_STATUS			0x3C8
+#define HDMI_CORE_DDC_CMD			0x3CC
 #define HDMI_CORE_DDC_DATA			0x3D0
-#define HDMI_CORE_DDC_SEGM			0x3B8
 
 /* HDMI IP Core Audio Video */
 
-#define HDMI_CORE_AV_HDMI_CTRL			0xBC
-#define HDMI_CORE_AV_DPD			0xF4
-#define HDMI_CORE_AV_PB_CTRL1			0xF8
-#define HDMI_CORE_AV_PB_CTRL2			0xFC
-#define HDMI_CORE_AV_AVI_TYPE			0x100
-#define HDMI_CORE_AV_AVI_VERS			0x104
-#define HDMI_CORE_AV_AVI_LEN			0x108
-#define HDMI_CORE_AV_AVI_CHSUM			0x10C
-#define HDMI_CORE_AV_AVI_DBYTE(n)		(n * 4 + 0x110)
-#define HDMI_CORE_AV_AVI_DBYTE_NELEMS		15
-#define HDMI_CORE_AV_SPD_DBYTE(n)		(n * 4 + 0x190)
-#define HDMI_CORE_AV_SPD_DBYTE_NELEMS		27
-#define HDMI_CORE_AV_AUD_DBYTE(n)		(n * 4 + 0x210)
-#define HDMI_CORE_AV_AUD_DBYTE_NELEMS		10
-#define HDMI_CORE_AV_MPEG_DBYTE(n)		(n * 4 + 0x290)
-#define HDMI_CORE_AV_MPEG_DBYTE_NELEMS		27
-#define HDMI_CORE_AV_GEN_DBYTE(n)		(n * 4 + 0x300)
-#define HDMI_CORE_AV_GEN_DBYTE_NELEMS		31
-#define HDMI_CORE_AV_GEN2_DBYTE(n)		(n * 4 + 0x380)
-#define HDMI_CORE_AV_GEN2_DBYTE_NELEMS		31
 #define HDMI_CORE_AV_ACR_CTRL			0x4
 #define HDMI_CORE_AV_FREQ_SVAL			0x8
 #define HDMI_CORE_AV_N_SVAL1			0xC
@@ -148,25 +129,39 @@
 #define HDMI_CORE_AV_AVI_VERS			0x104
 #define HDMI_CORE_AV_AVI_LEN			0x108
 #define HDMI_CORE_AV_AVI_CHSUM			0x10C
+#define HDMI_CORE_AV_AVI_DBYTE(n)		(n * 4 + 0x110)
 #define HDMI_CORE_AV_SPD_TYPE			0x180
 #define HDMI_CORE_AV_SPD_VERS			0x184
 #define HDMI_CORE_AV_SPD_LEN			0x188
 #define HDMI_CORE_AV_SPD_CHSUM			0x18C
+#define HDMI_CORE_AV_SPD_DBYTE(n)		(n * 4 + 0x190)
 #define HDMI_CORE_AV_AUDIO_TYPE			0x200
 #define HDMI_CORE_AV_AUDIO_VERS			0x204
 #define HDMI_CORE_AV_AUDIO_LEN			0x208
 #define HDMI_CORE_AV_AUDIO_CHSUM		0x20C
+#define HDMI_CORE_AV_AUD_DBYTE(n)		(n * 4 + 0x210)
 #define HDMI_CORE_AV_MPEG_TYPE			0x280
 #define HDMI_CORE_AV_MPEG_VERS			0x284
 #define HDMI_CORE_AV_MPEG_LEN			0x288
 #define HDMI_CORE_AV_MPEG_CHSUM			0x28C
+#define HDMI_CORE_AV_MPEG_DBYTE(n)		(n * 4 + 0x290)
+#define HDMI_CORE_AV_GEN_DBYTE(n)		(n * 4 + 0x300)
 #define HDMI_CORE_AV_CP_BYTE1			0x37C
+#define HDMI_CORE_AV_GEN2_DBYTE(n)		(n * 4 + 0x380)
 #define HDMI_CORE_AV_CEC_ADDR_ID		0x3FC
+
 #define HDMI_CORE_AV_SPD_DBYTE_ELSIZE		0x4
 #define HDMI_CORE_AV_GEN2_DBYTE_ELSIZE		0x4
 #define HDMI_CORE_AV_MPEG_DBYTE_ELSIZE		0x4
 #define HDMI_CORE_AV_GEN_DBYTE_ELSIZE		0x4
 
+#define HDMI_CORE_AV_AVI_DBYTE_NELEMS		15
+#define HDMI_CORE_AV_SPD_DBYTE_NELEMS		27
+#define HDMI_CORE_AV_AUD_DBYTE_NELEMS		10
+#define HDMI_CORE_AV_MPEG_DBYTE_NELEMS		27
+#define HDMI_CORE_AV_GEN_DBYTE_NELEMS		31
+#define HDMI_CORE_AV_GEN2_DBYTE_NELEMS		31
+
 /* PLL */
 
 #define PLLCTRL_PLL_CONTROL			0x0
-- 
cgit v1.2.3


From a2e5d82758a82b4848f00b1f28f8f71920e1b076 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 7 May 2012 16:51:35 +0530
Subject: OMAPDSS: Fix DSI_FCLK clock source selection

The wrong bit field was being updated in DSS_CTRL when trying to configure the
clock source of DSI2 functional clock. Use the correct bit field based on the
dsi module number.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index e731aa46eeaf..e212acb1e7d5 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -335,7 +335,7 @@ void dss_select_dsi_clk_source(int dsi_module,
 		enum omap_dss_clk_source clk_src)
 {
 	struct platform_device *dsidev;
-	int b;
+	int b, pos;
 
 	switch (clk_src) {
 	case OMAP_DSS_CLK_SRC_FCK:
@@ -357,7 +357,8 @@ void dss_select_dsi_clk_source(int dsi_module,
 		BUG();
 	}
 
-	REG_FLD_MOD(DSS_CONTROL, b, 1, 1);	/* DSI_CLK_SWITCH */
+	pos = dsi_module == 0 ? 1 : 10;
+	REG_FLD_MOD(DSS_CONTROL, b, pos, pos);	/* DSIx_CLK_SWITCH */
 
 	dss.dsi_clk_source[dsi_module] = clk_src;
 }
-- 
cgit v1.2.3


From 408d9dbbc4eebd8c4f2cd5d487f1b9c3c12c2c59 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 7 May 2012 16:51:36 +0530
Subject: OMAPDSS: DISPC: Remove Fake VSYNC support

Fake VSYNC support is a hack and has some bugs in it. It isn't used by any user
of DSS. Remove Fake VSYNC support. For DSI command mode and RFBI panels, a user
of DSS should wait for the completion of a frame by using the panel driver's
sync op.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/Kconfig |  9 ---------
 drivers/video/omap2/dss/dispc.c | 21 ---------------------
 drivers/video/omap2/dss/dsi.c   |  4 ----
 drivers/video/omap2/dss/dss.h   |  1 -
 4 files changed, 35 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 7be7c06a249e..9aaf3246f821 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -90,15 +90,6 @@ config OMAP2_DSS_DSI
 
 	  See http://www.mipi.org/ for DSI spesifications.
 
-config OMAP2_DSS_FAKE_VSYNC
-	bool "Fake VSYNC irq from manual update displays"
-	default n
-	help
-	  If this is selected, DSI will generate a fake DISPC VSYNC interrupt
-	  when DSI has sent a frame. This is only needed with DSI or RFBI
-	  displays using manual mode, and you want VSYNC to, for example,
-	  time animation.
-
 config OMAP2_DSS_MIN_FCK_PER_PCK
 	int "Minimum FCK/PCK ratio (for scaling)"
 	range 0 32
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 49015b8a9e4a..82012d15884b 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3441,27 +3441,6 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
 	return 0;
 }
 
-#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
-void dispc_fake_vsync_irq(void)
-{
-	u32 irqstatus = DISPC_IRQ_VSYNC;
-	int i;
-
-	WARN_ON(!in_interrupt());
-
-	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
-		struct omap_dispc_isr_data *isr_data;
-		isr_data = &dispc.registered_isr[i];
-
-		if (!isr_data->isr)
-			continue;
-
-		if (isr_data->mask & irqstatus)
-			isr_data->isr(isr_data->arg, irqstatus);
-	}
-}
-#endif
-
 static void _omap_dispc_initialize_irq(void)
 {
 	unsigned long flags;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index b6cf03cc9221..6c4b034d7685 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4152,10 +4152,6 @@ static void dsi_framedone_irq_callback(void *data, u32 mask)
 	__cancel_delayed_work(&dsi->framedone_timeout_work);
 
 	dsi_handle_framedone(dsidev, 0);
-
-#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
-	dispc_fake_vsync_irq();
-#endif
 }
 
 int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 5ca67f111d09..94d82344894f 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -396,7 +396,6 @@ void dispc_dump_clocks(struct seq_file *s);
 void dispc_dump_irqs(struct seq_file *s);
 void dispc_dump_regs(struct seq_file *s);
 void dispc_irq_handler(void);
-void dispc_fake_vsync_irq(void);
 
 int dispc_runtime_get(void);
 void dispc_runtime_put(void);
-- 
cgit v1.2.3


From 45324a2648bcfa96adeae71ae992da931eed79f6 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 26 Apr 2012 19:31:22 +0530
Subject: OMAPDSS: APPLY: Add manager timings as extra_info in private data

DISPC manager size and DISPC manager blanking parameters(for LCD managers)
follow the shadow register programming model. Currently, they are programmed
directly by the interface drivers.

To configure manager timings using APPLY, there is a need to introduce extra
info flags for managers, similar to what is done for overlays. This is needed
because timings aren't a part of overlay_manager_info struct configured by a
user of DSS, they are configured internally by the interface or panel drivers.

Add dirty and shadow_dirty extra_info flags for managers, update these flags
at the appropriate places. Rewrite the function extra_info_update_ongoing()
slightly as checking for manager's extra_info flags can simplify the code a bit.

Create function dss_mgr_set_timings() which applies the new manager timings to
extra_info.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c | 96 +++++++++++++++++++++++++++++++++++------
 drivers/video/omap2/dss/dss.h   |  2 +
 2 files changed, 85 insertions(+), 13 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index b10b3bc1931e..57686f66411c 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -99,6 +99,11 @@ struct mgr_priv_data {
 
 	/* If true, a display is enabled using this manager */
 	bool enabled;
+
+	bool extra_info_dirty;
+	bool shadow_extra_info_dirty;
+
+	struct omap_video_timings timings;
 };
 
 static struct {
@@ -261,6 +266,20 @@ static bool need_isr(void)
 			if (mp->shadow_info_dirty)
 				return true;
 
+			/*
+			 * NOTE: we don't check extra_info flags for disabled
+			 * managers, once the manager is enabled, the extra_info
+			 * related manager changes will be taken in by HW.
+			 */
+
+			/* to write new values to registers */
+			if (mp->extra_info_dirty)
+				return true;
+
+			/* to set GO bit */
+			if (mp->shadow_extra_info_dirty)
+				return true;
+
 			list_for_each_entry(ovl, &mgr->overlays, list) {
 				struct ovl_priv_data *op;
 
@@ -305,7 +324,7 @@ static bool need_go(struct omap_overlay_manager *mgr)
 
 	mp = get_mgr_priv(mgr);
 
-	if (mp->shadow_info_dirty)
+	if (mp->shadow_info_dirty || mp->shadow_extra_info_dirty)
 		return true;
 
 	list_for_each_entry(ovl, &mgr->overlays, list) {
@@ -320,20 +339,16 @@ static bool need_go(struct omap_overlay_manager *mgr)
 /* returns true if an extra_info field is currently being updated */
 static bool extra_info_update_ongoing(void)
 {
-	const int num_ovls = omap_dss_get_num_overlays();
-	struct ovl_priv_data *op;
-	struct omap_overlay *ovl;
-	struct mgr_priv_data *mp;
+	const int num_mgrs = dss_feat_get_num_mgrs();
 	int i;
 
-	for (i = 0; i < num_ovls; ++i) {
-		ovl = omap_dss_get_overlay(i);
-		op = get_ovl_priv(ovl);
-
-		if (!ovl->manager)
-			continue;
+	for (i = 0; i < num_mgrs; ++i) {
+		struct omap_overlay_manager *mgr;
+		struct omap_overlay *ovl;
+		struct mgr_priv_data *mp;
 
-		mp = get_mgr_priv(ovl->manager);
+		mgr = omap_dss_get_overlay_manager(i);
+		mp = get_mgr_priv(mgr);
 
 		if (!mp->enabled)
 			continue;
@@ -341,8 +356,15 @@ static bool extra_info_update_ongoing(void)
 		if (!mp->updating)
 			continue;
 
-		if (op->extra_info_dirty || op->shadow_extra_info_dirty)
+		if (mp->extra_info_dirty || mp->shadow_extra_info_dirty)
 			return true;
+
+		list_for_each_entry(ovl, &mgr->overlays, list) {
+			struct ovl_priv_data *op = get_ovl_priv(ovl);
+
+			if (op->extra_info_dirty || op->shadow_extra_info_dirty)
+				return true;
+		}
 	}
 
 	return false;
@@ -601,6 +623,22 @@ static void dss_mgr_write_regs(struct omap_overlay_manager *mgr)
 	}
 }
 
+static void dss_mgr_write_regs_extra(struct omap_overlay_manager *mgr)
+{
+	struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+	DSSDBGF("%d", mgr->id);
+
+	if (!mp->extra_info_dirty)
+		return;
+
+	dispc_mgr_set_timings(mgr->id, &mp->timings);
+
+	mp->extra_info_dirty = false;
+	if (mp->updating)
+		mp->shadow_extra_info_dirty = true;
+}
+
 static void dss_write_regs_common(void)
 {
 	const int num_mgrs = omap_dss_get_num_overlay_managers();
@@ -654,6 +692,7 @@ static void dss_write_regs(void)
 		}
 
 		dss_mgr_write_regs(mgr);
+		dss_mgr_write_regs_extra(mgr);
 	}
 }
 
@@ -693,6 +732,7 @@ static void mgr_clear_shadow_dirty(struct omap_overlay_manager *mgr)
 
 	mp = get_mgr_priv(mgr);
 	mp->shadow_info_dirty = false;
+	mp->shadow_extra_info_dirty = false;
 
 	list_for_each_entry(ovl, &mgr->overlays, list) {
 		op = get_ovl_priv(ovl);
@@ -719,6 +759,7 @@ void dss_mgr_start_update(struct omap_overlay_manager *mgr)
 	}
 
 	dss_mgr_write_regs(mgr);
+	dss_mgr_write_regs_extra(mgr);
 
 	dss_write_regs_common();
 
@@ -1225,6 +1266,35 @@ err:
 	return r;
 }
 
+static void dss_apply_mgr_timings(struct omap_overlay_manager *mgr,
+		struct omap_video_timings *timings)
+{
+	struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+	mp->timings = *timings;
+	mp->extra_info_dirty = true;
+}
+
+void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
+		struct omap_video_timings *timings)
+{
+	unsigned long flags;
+
+	mutex_lock(&apply_lock);
+
+	spin_lock_irqsave(&data_lock, flags);
+
+	dss_apply_mgr_timings(mgr, timings);
+
+	dss_write_regs();
+	dss_set_go_bits();
+
+	spin_unlock_irqrestore(&data_lock, flags);
+
+	wait_pending_extra_info_updates();
+
+	mutex_unlock(&apply_lock);
+}
 
 int dss_ovl_set_info(struct omap_overlay *ovl,
 		struct omap_overlay_info *info)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 94d82344894f..b17a2120dc25 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -177,6 +177,8 @@ void dss_mgr_get_info(struct omap_overlay_manager *mgr,
 int dss_mgr_set_device(struct omap_overlay_manager *mgr,
 		struct omap_dss_device *dssdev);
 int dss_mgr_unset_device(struct omap_overlay_manager *mgr);
+void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
+		struct omap_video_timings *timings);
 
 bool dss_ovl_is_enabled(struct omap_overlay *ovl);
 int dss_ovl_enable(struct omap_overlay *ovl);
-- 
cgit v1.2.3


From 4172116385ede7abcfbbcc6eb6b7133385695001 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 26 Apr 2012 20:10:46 +0530
Subject: OMAPDSS: Apply manager timings instead of direct DISPC writes

Replace the function dispc_mgr_set_timings() with dss_mgr_set_timings() in the
interface drivers. The latter function ensures that the timing related DISPC
registers are configured according to the shadow register programming model.

Remove the call to dispc_mgr_go() in dpi_set_timings() as the manager's go bit
is set by dss_mgr_set_timings().

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dpi.c  | 3 +--
 drivers/video/omap2/dss/dsi.c  | 5 ++---
 drivers/video/omap2/dss/hdmi.c | 2 +-
 drivers/video/omap2/dss/rfbi.c | 4 ++--
 drivers/video/omap2/dss/sdi.c  | 2 +-
 drivers/video/omap2/dss/venc.c | 2 +-
 6 files changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index cec116684365..e65cf1f9a694 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -156,7 +156,7 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
 		t->pixel_clock = pck;
 	}
 
-	dispc_mgr_set_timings(dssdev->manager->id, t);
+	dss_mgr_set_timings(dssdev->manager, t);
 
 	return 0;
 }
@@ -294,7 +294,6 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
 		}
 
 		dpi_set_mode(dssdev);
-		dispc_mgr_go(dssdev->manager->id);
 
 		dispc_runtime_put();
 		dss_runtime_put();
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 6c4b034d7685..95bc9964ab9c 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4215,13 +4215,12 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 		dispc_mgr_enable_stallmode(dssdev->manager->id, true);
 		dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 1);
 
-		dispc_mgr_set_timings(dssdev->manager->id, &timings);
+		dss_mgr_set_timings(dssdev->manager, &timings);
 	} else {
 		dispc_mgr_enable_stallmode(dssdev->manager->id, false);
 		dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 0);
 
-		dispc_mgr_set_timings(dssdev->manager->id,
-			&dssdev->panel.timings);
+		dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
 	}
 
 		dispc_mgr_set_lcd_display_type(dssdev->manager->id,
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 56f6e9ce126f..8d4ff8c3d318 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -376,7 +376,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	dispc_enable_gamma_table(0);
 
 	/* tv size */
-	dispc_mgr_set_timings(dssdev->manager->id, &dssdev->panel.timings);
+	dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
 
 	hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 1);
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index a81ffcbfa68a..feadfab27ec2 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -320,7 +320,7 @@ static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
 
 	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
 
-	dispc_mgr_set_timings(dssdev->manager->id, &timings);
+	dss_mgr_set_timings(dssdev->manager, &timings);
 
 	dispc_mgr_enable(dssdev->manager->id, true);
 
@@ -804,7 +804,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
 	if (*w == 0 || *h == 0)
 		return -EINVAL;
 
-	dispc_mgr_set_timings(dssdev->manager->id, &timings);
+	dss_mgr_set_timings(dssdev->manager, &timings);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 741b8341439f..67fbe7cee412 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -107,7 +107,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	}
 
 
-	dispc_mgr_set_timings(dssdev->manager->id, t);
+	dss_mgr_set_timings(dssdev->manager, t);
 
 	r = dss_set_clock_div(&dss_cinfo);
 	if (r)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 30bbb63421b9..e2374645a442 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -444,7 +444,7 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 	timings = dssdev->panel.timings;
 	timings.y_res /= 2;
 
-	dispc_mgr_set_timings(dssdev->manager->id, &timings);
+	dss_mgr_set_timings(dssdev->manager, &timings);
 
 	r = regulator_enable(venc.vdda_dac_reg);
 	if (r)
-- 
cgit v1.2.3


From b917fa3961448903f4ee823917194bdf20709fbd Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 27 Apr 2012 01:07:28 +0530
Subject: OMAPDSS: MANAGER: Create a function to check manager timings

Create a function dss_mgr_check_timings() which wraps around the function
dispc_mgr_timings_ok(). This is mainly a clean up to hide dispc functions
from interface drivers.

dss_mgr_check_timings() is added in the function dss_mgr_check(), it currently
takes the timings maintained in the omap_dss_device struct. This would be later
replaced by the timings stored in the manager's private data.

Make dss_mgr_check_timings() and dispc_mgr_timings_ok() take a const
omap_video_timings pointer since these functions just check the timings.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c   |  2 +-
 drivers/video/omap2/dss/dpi.c     |  2 +-
 drivers/video/omap2/dss/dss.h     |  4 +++-
 drivers/video/omap2/dss/manager.c | 15 +++++++++++++++
 4 files changed, 20 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 82012d15884b..6eec08400094 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2479,7 +2479,7 @@ static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
 }
 
 bool dispc_mgr_timings_ok(enum omap_channel channel,
-		struct omap_video_timings *timings)
+		const struct omap_video_timings *timings)
 {
 	bool timings_ok;
 
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index e65cf1f9a694..e01ab9825930 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -311,7 +311,7 @@ int dpi_check_timings(struct omap_dss_device *dssdev,
 	unsigned long pck;
 	struct dispc_clock_info dispc_cinfo;
 
-	if (!dispc_mgr_timings_ok(dssdev->manager->id, timings))
+	if (dss_mgr_check_timings(dssdev->manager, timings))
 		return -EINVAL;
 
 	if (timings->pixel_clock == 0)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index b17a2120dc25..a13b3055a447 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -208,6 +208,8 @@ int dss_init_overlay_managers(struct platform_device *pdev);
 void dss_uninit_overlay_managers(struct platform_device *pdev);
 int dss_mgr_simple_check(struct omap_overlay_manager *mgr,
 		const struct omap_overlay_manager_info *info);
+int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
+		const struct omap_video_timings *timings);
 int dss_mgr_check(struct omap_overlay_manager *mgr,
 		struct omap_dss_device *dssdev,
 		struct omap_overlay_manager_info *info,
@@ -413,7 +415,7 @@ void dispc_enable_gamma_table(bool enable);
 void dispc_set_loadmode(enum omap_dss_load_mode mode);
 
 bool dispc_mgr_timings_ok(enum omap_channel channel,
-		struct omap_video_timings *timings);
+		const struct omap_video_timings *timings);
 unsigned long dispc_fclk_rate(void);
 void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
 		struct dispc_clock_info *cinfo);
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index e7364603f6a1..566fbba16774 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -654,6 +654,17 @@ static int dss_mgr_check_zorder(struct omap_overlay_manager *mgr,
 	return 0;
 }
 
+int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
+		const struct omap_video_timings *timings)
+{
+	if (!dispc_mgr_timings_ok(mgr->id, timings)) {
+		DSSERR("check_manager: invalid timings\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 int dss_mgr_check(struct omap_overlay_manager *mgr,
 		struct omap_dss_device *dssdev,
 		struct omap_overlay_manager_info *info,
@@ -668,6 +679,10 @@ int dss_mgr_check(struct omap_overlay_manager *mgr,
 			return r;
 	}
 
+	r = dss_mgr_check_timings(mgr, &dssdev->panel.timings);
+	if (r)
+		return r;
+
 	list_for_each_entry(ovl, &mgr->overlays, list) {
 		struct omap_overlay_info *oi;
 		int r;
-- 
cgit v1.2.3


From 5dd747e8892a63a5d4cc1d2765c0f533a5d74cfd Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 8 May 2012 18:19:15 +0530
Subject: OMAPDSS: APPLY: Don't check manager settings if it is disabled

If a manager is disabled, there is no guarantee at any point in time that all
it's parameters are configured. There is always a chance that some more
parameters are yet to be configured by a user of DSS, or by DSS itself.

However, when the manager is enabled, we can be certain that all the parameters
have been configured, as we can't enable a manager with an incomplete
configuration. Therefore, if a manager is disabled, don't check for the validity
of it's parameters or the parameters of the overlays connected to it. Only check
once it is enabled. Add a check in dss_check_settings_low() to achieve the same.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 57686f66411c..ad349b3083c1 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -192,6 +192,9 @@ static int dss_check_settings_low(struct omap_overlay_manager *mgr,
 
 	mp = get_mgr_priv(mgr);
 
+	if (!mp->enabled)
+		return 0;
+
 	if (applying && mp->user_info_dirty)
 		mi = &mp->user_info;
 	else
-- 
cgit v1.2.3


From 228b21349db4ca5636ec1efdb3b3d54fe18092de Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 27 Apr 2012 01:22:28 +0530
Subject: OMAPDSS: APPLY: Remove display dependency from overlay and manager
 checks

In order to check the validity of overlay and manager info, there was a need to
use the omap_dss_device struct to get the panel resolution. The manager's
private data in APPLY now contains the manager timings. Hence, we don't need to
rely on the display resolution any more.

Pass the manager's timings in private data to dss_mgr_check(). Remove the need
to pass omap_dss_device structs in the functions which check for the validity
of overlay and manager parameters.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c   | 24 +++++++++++-------------
 drivers/video/omap2/dss/dss.h     |  7 ++++---
 drivers/video/omap2/dss/manager.c |  6 +++---
 drivers/video/omap2/dss/overlay.c | 10 ++++------
 4 files changed, 22 insertions(+), 25 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index ad349b3083c1..0ffe4e101c56 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -181,7 +181,7 @@ static bool mgr_manual_update(struct omap_overlay_manager *mgr)
 }
 
 static int dss_check_settings_low(struct omap_overlay_manager *mgr,
-		struct omap_dss_device *dssdev, bool applying)
+		bool applying)
 {
 	struct omap_overlay_info *oi;
 	struct omap_overlay_manager_info *mi;
@@ -214,26 +214,24 @@ static int dss_check_settings_low(struct omap_overlay_manager *mgr,
 		ois[ovl->id] = oi;
 	}
 
-	return dss_mgr_check(mgr, dssdev, mi, ois);
+	return dss_mgr_check(mgr, mi, &mp->timings, ois);
 }
 
 /*
  * check manager and overlay settings using overlay_info from data->info
  */
-static int dss_check_settings(struct omap_overlay_manager *mgr,
-		struct omap_dss_device *dssdev)
+static int dss_check_settings(struct omap_overlay_manager *mgr)
 {
-	return dss_check_settings_low(mgr, dssdev, false);
+	return dss_check_settings_low(mgr, false);
 }
 
 /*
  * check manager and overlay settings using overlay_info from ovl->info if
  * dirty and from data->info otherwise
  */
-static int dss_check_settings_apply(struct omap_overlay_manager *mgr,
-		struct omap_dss_device *dssdev)
+static int dss_check_settings_apply(struct omap_overlay_manager *mgr)
 {
-	return dss_check_settings_low(mgr, dssdev, true);
+	return dss_check_settings_low(mgr, true);
 }
 
 static bool need_isr(void)
@@ -687,7 +685,7 @@ static void dss_write_regs(void)
 		if (!mp->enabled || mgr_manual_update(mgr) || mp->busy)
 			continue;
 
-		r = dss_check_settings(mgr, mgr->device);
+		r = dss_check_settings(mgr);
 		if (r) {
 			DSSERR("cannot write registers for manager %s: "
 					"illegal configuration\n", mgr->name);
@@ -754,7 +752,7 @@ void dss_mgr_start_update(struct omap_overlay_manager *mgr)
 
 	WARN_ON(mp->updating);
 
-	r = dss_check_settings(mgr, mgr->device);
+	r = dss_check_settings(mgr);
 	if (r) {
 		DSSERR("cannot start manual update: illegal configuration\n");
 		spin_unlock_irqrestore(&data_lock, flags);
@@ -901,7 +899,7 @@ int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
 
 	spin_lock_irqsave(&data_lock, flags);
 
-	r = dss_check_settings_apply(mgr, mgr->device);
+	r = dss_check_settings_apply(mgr);
 	if (r) {
 		spin_unlock_irqrestore(&data_lock, flags);
 		DSSERR("failed to apply settings: illegal configuration.\n");
@@ -1094,7 +1092,7 @@ int dss_mgr_enable(struct omap_overlay_manager *mgr)
 
 	mp->enabled = true;
 
-	r = dss_check_settings(mgr, mgr->device);
+	r = dss_check_settings(mgr);
 	if (r) {
 		DSSERR("failed to enable manager %d: check_settings failed\n",
 				mgr->id);
@@ -1466,7 +1464,7 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 
 	op->enabling = true;
 
-	r = dss_check_settings(ovl->manager, ovl->manager->device);
+	r = dss_check_settings(ovl->manager);
 	if (r) {
 		DSSERR("failed to enable overlay %d: check_settings failed\n",
 				ovl->id);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index a13b3055a447..f3fa4454446e 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -179,6 +179,7 @@ int dss_mgr_set_device(struct omap_overlay_manager *mgr,
 int dss_mgr_unset_device(struct omap_overlay_manager *mgr);
 void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
 		struct omap_video_timings *timings);
+const struct omap_video_timings *dss_mgr_get_timings(struct omap_overlay_manager *mgr);
 
 bool dss_ovl_is_enabled(struct omap_overlay *ovl);
 int dss_ovl_enable(struct omap_overlay *ovl);
@@ -211,8 +212,8 @@ int dss_mgr_simple_check(struct omap_overlay_manager *mgr,
 int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
 		const struct omap_video_timings *timings);
 int dss_mgr_check(struct omap_overlay_manager *mgr,
-		struct omap_dss_device *dssdev,
 		struct omap_overlay_manager_info *info,
+		const struct omap_video_timings *mgr_timings,
 		struct omap_overlay_info **overlay_infos);
 
 /* overlay */
@@ -222,8 +223,8 @@ void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr);
 void dss_recheck_connections(struct omap_dss_device *dssdev, bool force);
 int dss_ovl_simple_check(struct omap_overlay *ovl,
 		const struct omap_overlay_info *info);
-int dss_ovl_check(struct omap_overlay *ovl,
-		struct omap_overlay_info *info, struct omap_dss_device *dssdev);
+int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
+		const struct omap_video_timings *mgr_timings);
 
 /* DSS */
 int dss_init_platform_driver(void);
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 566fbba16774..0cbcde4c688a 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -666,8 +666,8 @@ int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
 }
 
 int dss_mgr_check(struct omap_overlay_manager *mgr,
-		struct omap_dss_device *dssdev,
 		struct omap_overlay_manager_info *info,
+		const struct omap_video_timings *mgr_timings,
 		struct omap_overlay_info **overlay_infos)
 {
 	struct omap_overlay *ovl;
@@ -679,7 +679,7 @@ int dss_mgr_check(struct omap_overlay_manager *mgr,
 			return r;
 	}
 
-	r = dss_mgr_check_timings(mgr, &dssdev->panel.timings);
+	r = dss_mgr_check_timings(mgr, mgr_timings);
 	if (r)
 		return r;
 
@@ -692,7 +692,7 @@ int dss_mgr_check(struct omap_overlay_manager *mgr,
 		if (oi == NULL)
 			continue;
 
-		r = dss_ovl_check(ovl, oi, dssdev);
+		r = dss_ovl_check(ovl, oi, mgr_timings);
 		if (r)
 			return r;
 	}
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 6e821810deec..0da5eb654ae9 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -631,16 +631,14 @@ int dss_ovl_simple_check(struct omap_overlay *ovl,
 	return 0;
 }
 
-int dss_ovl_check(struct omap_overlay *ovl,
-		struct omap_overlay_info *info, struct omap_dss_device *dssdev)
+int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
+		const struct omap_video_timings *mgr_timings)
 {
 	u16 outw, outh;
 	u16 dw, dh;
 
-	if (dssdev == NULL)
-		return 0;
-
-	dssdev->driver->get_resolution(dssdev, &dw, &dh);
+	dw = mgr_timings->x_res;
+	dh = mgr_timings->y_res;
 
 	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
 		outw = info->width;
-- 
cgit v1.2.3


From fcc36619901064a76e15a545ea36d38ba0e54192 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 3 May 2012 20:03:11 +0530
Subject: OMAPDSS: DPI/HDMI: Apply manager timings even if panel is disabled

The DPI and HDMI interfaces use their 'set_timing' functions to take in a new
set of timings. If the panel is disabled, they do not disable and re-enable
the interface. Currently, the manager timings are applied in hdmi_power_on()
and dpi_set_mode() respectively, these are not called by set_timings if the
panel is disabled.

When checking overlay and manager data, the DSS driver uses the last applied
manager timings, and not the timings held by omap_dss_device struct. Hence,
there is a need to apply the new manager timings even if the panel is disabled.

Apply the manager timings if the panel is disabled. Eventually, there should be
one common place where the timings are applied independent of the state of the
panel.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dpi.c  | 2 ++
 drivers/video/omap2/dss/hdmi.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index e01ab9825930..d6e8fe776152 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -297,6 +297,8 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
 
 		dispc_runtime_put();
 		dss_runtime_put();
+	} else {
+		dss_mgr_set_timings(dssdev->manager, timings);
 	}
 }
 EXPORT_SYMBOL(dpi_set_timings);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 8d4ff8c3d318..32ad7124a952 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -435,6 +435,8 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
 		r = hdmi_power_on(dssdev);
 		if (r)
 			DSSERR("failed to power on device\n");
+	} else {
+		dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
 	}
 }
 
-- 
cgit v1.2.3


From b3d795abb253c7605f8b6257f2e25e7ebaaf4b57 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 9 Apr 2012 14:36:08 +0530
Subject: OMAPDSS: APPLY: Remove an unnecessary omap_dss_device pointer

The omap_dss_device pointer declared in dss_ovl_setup_fifo() isn't used. Remove
the pointer variable declaration and it's assignment.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 0ffe4e101c56..15c070cc695f 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -960,14 +960,11 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
 		bool use_fifo_merge)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
-	struct omap_dss_device *dssdev;
 	u32 fifo_low, fifo_high;
 
 	if (!op->enabled && !op->enabling)
 		return;
 
-	dssdev = ovl->manager->device;
-
 	dispc_ovl_compute_fifo_thresholds(ovl->id, &fifo_low, &fifo_high,
 			use_fifo_merge);
 
-- 
cgit v1.2.3


From 3fa03ba8542c40b90c95facfecd9b2789f71c0b6 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 9 Apr 2012 15:06:41 +0530
Subject: OMAPDSS: DISPC: Remove omap_dss_device pointer usage from
 dispc_mgr_pclk_rate()

The pixel clock rate for the TV manager is calculated by checking the device
type connected to the manager, and then requesting the VENC/HDMI interface for
the pixel clock rate.

Remove the use of omap_dss_device pointer from here by checking which interface
generates the pixel clock by reading the DSS_CTRL.VENC_HDMI_SWITCH bit.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 6eec08400094..cd0a3979c5d1 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2643,13 +2643,14 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
 
 		return r / pcd;
 	} else {
-		struct omap_dss_device *dssdev =
-			dispc_mgr_get_device(channel);
+		enum dss_hdmi_venc_clk_source_select source;
 
-		switch (dssdev->type) {
-		case OMAP_DISPLAY_TYPE_VENC:
+		source = dss_get_hdmi_venc_clk_source();
+
+		switch (source) {
+		case DSS_VENC_TV_CLK:
 			return venc_get_pixel_clock();
-		case OMAP_DISPLAY_TYPE_HDMI:
+		case DSS_HDMI_M_PCLK:
 			return hdmi_get_pixel_clock();
 		default:
 			BUG();
-- 
cgit v1.2.3


From 81ab95b7ec91e47c81e5e6ef4aac7b08c1ae90aa Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 8 May 2012 15:53:20 +0530
Subject: OMAPDSS: DISPC: Remove usage of dispc_mgr_get_device()

The functions calc_fclk_five_taps() and check_horiz_timing_omap3() use the
function dispc_mgr_get_device() to get the omap_dss_device pointer to which
the manager is connected, the width of the panel is derived from that.

The manager's timing is stored in it's private data in APPLY. This contains
the latest timings applied to the manager. Pass these timings to
dispc_ovl_setup() and use them in the above functions. Remove the function
dispc_mgr_get_device() as it isn't used any more.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c |  6 ++---
 drivers/video/omap2/dss/dispc.c | 51 +++++++++++++++++++----------------------
 drivers/video/omap2/dss/dss.h   |  3 ++-
 3 files changed, 28 insertions(+), 32 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 15c070cc695f..dd88b8f936c4 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -548,11 +548,13 @@ static void dss_ovl_write_regs(struct omap_overlay *ovl)
 
 	oi = &op->info;
 
+	mp = get_mgr_priv(ovl->manager);
+
 	replication = dss_use_replication(ovl->manager->device, oi->color_mode);
 
 	ilace = ovl->manager->device->type == OMAP_DISPLAY_TYPE_VENC;
 
-	r = dispc_ovl_setup(ovl->id, oi, ilace, replication);
+	r = dispc_ovl_setup(ovl->id, oi, ilace, replication, &mp->timings);
 	if (r) {
 		/*
 		 * We can't do much here, as this function can be called from
@@ -566,8 +568,6 @@ static void dss_ovl_write_regs(struct omap_overlay *ovl)
 		return;
 	}
 
-	mp = get_mgr_priv(ovl->manager);
-
 	op->info_dirty = false;
 	if (mp->updating)
 		op->shadow_info_dirty = true;
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index cd0a3979c5d1..727e15b29a14 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -413,14 +413,6 @@ static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
 		return false;
 }
 
-static struct omap_dss_device *dispc_mgr_get_device(enum omap_channel channel)
-{
-	struct omap_overlay_manager *mgr =
-		omap_dss_get_overlay_manager(channel);
-
-	return mgr ? mgr->device : NULL;
-}
-
 u32 dispc_mgr_get_vsync_irq(enum omap_channel channel)
 {
 	switch (channel) {
@@ -1661,18 +1653,17 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
  * This function is used to avoid synclosts in OMAP3, because of some
  * undocumented horizontal position and timing related limitations.
  */
-static int check_horiz_timing_omap3(enum omap_channel channel, u16 pos_x,
+static int check_horiz_timing_omap3(enum omap_channel channel,
+		const struct omap_video_timings *t, u16 pos_x,
 		u16 width, u16 height, u16 out_width, u16 out_height)
 {
 	int DS = DIV_ROUND_UP(height, out_height);
-	struct omap_dss_device *dssdev = dispc_mgr_get_device(channel);
-	struct omap_video_timings t = dssdev->panel.timings;
 	unsigned long nonactive, lclk, pclk;
 	static const u8 limits[3] = { 8, 10, 20 };
 	u64 val, blank;
 	int i;
 
-	nonactive = t.x_res + t.hfp + t.hsw + t.hbp - out_width;
+	nonactive = t->x_res + t->hfp + t->hsw + t->hbp - out_width;
 	pclk = dispc_mgr_pclk_rate(channel);
 	if (dispc_mgr_is_lcd(channel))
 		lclk = dispc_mgr_lclk_rate(channel);
@@ -1684,7 +1675,7 @@ static int check_horiz_timing_omap3(enum omap_channel channel, u16 pos_x,
 		i++;
 	if (out_width < width)
 		i++;
-	blank = div_u64((u64)(t.hbp + t.hsw + t.hfp) * lclk, pclk);
+	blank = div_u64((u64)(t->hbp + t->hsw + t->hfp) * lclk, pclk);
 	DSSDBG("blanking period + ppl = %llu (limit = %u)\n", blank, limits[i]);
 	if (blank <= limits[i])
 		return -EINVAL;
@@ -1715,7 +1706,8 @@ static int check_horiz_timing_omap3(enum omap_channel channel, u16 pos_x,
 }
 
 static unsigned long calc_core_clk_five_taps(enum omap_channel channel,
-		u16 width, u16 height, u16 out_width, u16 out_height,
+		const struct omap_video_timings *mgr_timings, u16 width,
+		u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode)
 {
 	u32 core_clk = 0;
@@ -1725,8 +1717,7 @@ static unsigned long calc_core_clk_five_taps(enum omap_channel channel,
 		return (unsigned long) pclk;
 
 	if (height > out_height) {
-		struct omap_dss_device *dssdev = dispc_mgr_get_device(channel);
-		unsigned int ppl = dssdev->panel.timings.x_res;
+		unsigned int ppl = mgr_timings->x_res;
 
 		tmp = pclk * height * out_width;
 		do_div(tmp, 2 * out_height * ppl);
@@ -1795,8 +1786,9 @@ static unsigned long calc_core_clk(enum omap_channel channel, u16 width,
 }
 
 static int dispc_ovl_calc_scaling(enum omap_plane plane,
-		enum omap_channel channel, u16 width, u16 height,
-		u16 out_width, u16 out_height,
+		enum omap_channel channel,
+		const struct omap_video_timings *mgr_timings,
+		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, u16 pos_x)
 {
@@ -1871,11 +1863,13 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		do {
 			in_height = DIV_ROUND_UP(height, decim_y);
 			in_width = DIV_ROUND_UP(width, decim_x);
-			core_clk = calc_core_clk_five_taps(channel, in_width,
-				in_height, out_width, out_height, color_mode);
+			core_clk = calc_core_clk_five_taps(channel, mgr_timings,
+				in_width, in_height, out_width, out_height,
+				color_mode);
 
-			error = check_horiz_timing_omap3(channel, pos_x,
-				in_width, in_height, out_width, out_height);
+			error = check_horiz_timing_omap3(channel, mgr_timings,
+				pos_x, in_width, in_height, out_width,
+				out_height);
 
 			if (in_width > maxsinglelinewidth)
 				if (in_height > out_height &&
@@ -1900,8 +1894,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		} while (decim_x <= *x_predecim && decim_y <= *y_predecim
 			&& error);
 
-		if (check_horiz_timing_omap3(channel, pos_x, width, height,
-			out_width, out_height)){
+		if (check_horiz_timing_omap3(channel, mgr_timings, pos_x, width,
+			height, out_width, out_height)){
 				DSSERR("horizontal timing too tight\n");
 				return -EINVAL;
 		}
@@ -1959,7 +1953,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 }
 
 int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
-		bool ilace, bool replication)
+		bool ilace, bool replication,
+		const struct omap_video_timings *mgr_timings)
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 	bool five_taps = true;
@@ -2008,9 +2003,9 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	if (!dss_feat_color_mode_supported(plane, oi->color_mode))
 		return -EINVAL;
 
-	r = dispc_ovl_calc_scaling(plane, channel, in_width, in_height,
-			out_width, out_height, oi->color_mode, &five_taps,
-			&x_predecim, &y_predecim, oi->pos_x);
+	r = dispc_ovl_calc_scaling(plane, channel, mgr_timings, in_width,
+			in_height, out_width, out_height, oi->color_mode,
+			&five_taps, &x_predecim, &y_predecim, oi->pos_x);
 	if (r)
 		return r;
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index f3fa4454446e..8e9e9a5765fa 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -428,7 +428,8 @@ void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high);
 void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
 		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge);
 int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
-		bool ilace, bool replication);
+		bool ilace, bool replication,
+		const struct omap_video_timings *mgr_timings);
 int dispc_ovl_enable(enum omap_plane plane, bool enable);
 void dispc_ovl_set_channel_out(enum omap_plane plane,
 		enum omap_channel channel);
-- 
cgit v1.2.3


From 0aca3c63e068e47616bdd54b9d19e4771db86e8e Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Tue, 24 Apr 2012 00:08:54 +0300
Subject: OMAPDSS: VENC: allow switching venc output type at runtime

VENC output type (composite/svideo) doesn't have to be fixed by board
wiring, it is possible to also provide composite signal through svideo
luminance connector (software enabled), which is what pandora does.

Having to recompile the kernel for users who have TV connector types
that don't match default board setting is very inconvenient, especially
for users of a consumer device, so add support for switching VENC output
type at runtime over a new sysfs file output_type.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/venc.c | 54 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index e2374645a442..9475e6edce68 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -490,16 +490,68 @@ unsigned long venc_get_pixel_clock(void)
 	return 13500000;
 }
 
+static ssize_t display_output_type_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	const char *ret;
+
+	switch (dssdev->phy.venc.type) {
+	case OMAP_DSS_VENC_TYPE_COMPOSITE:
+		ret = "composite";
+		break;
+	case OMAP_DSS_VENC_TYPE_SVIDEO:
+		ret = "svideo";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", ret);
+}
+
+static ssize_t display_output_type_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	enum omap_dss_venc_type new_type;
+
+	if (sysfs_streq("composite", buf))
+		new_type = OMAP_DSS_VENC_TYPE_COMPOSITE;
+	else if (sysfs_streq("svideo", buf))
+		new_type = OMAP_DSS_VENC_TYPE_SVIDEO;
+	else
+		return -EINVAL;
+
+	mutex_lock(&venc.venc_lock);
+
+	if (dssdev->phy.venc.type != new_type) {
+		dssdev->phy.venc.type = new_type;
+		if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+			venc_power_off(dssdev);
+			venc_power_on(dssdev);
+		}
+	}
+
+	mutex_unlock(&venc.venc_lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(output_type, S_IRUGO | S_IWUSR,
+		display_output_type_show, display_output_type_store);
+
 /* driver */
 static int venc_panel_probe(struct omap_dss_device *dssdev)
 {
 	dssdev->panel.timings = omap_dss_pal_timings;
 
-	return 0;
+	return device_create_file(&dssdev->dev, &dev_attr_output_type);
 }
 
 static void venc_panel_remove(struct omap_dss_device *dssdev)
 {
+	device_remove_file(&dssdev->dev, &dev_attr_output_type);
 }
 
 static int venc_panel_enable(struct omap_dss_device *dssdev)
-- 
cgit v1.2.3


From b3e68d306519cc96ff5ad2957d133997f91bb53e Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Thu, 10 May 2012 14:19:56 +0300
Subject: OMAPDSS: OMAPFB: always allow to configure overlay

Currently when multiple overlays are active, OMAPFB_SETUP_PLANE fails.
Instead of failing, allow it to configure the first overlay as if there
was only one overlay, the remaining ones will have to be configured in
other ways (sysfs).

This allows overlay-controlling programs (like video players) to function
properly when framebuffer is cloned to another display (like TV).

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-ioctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 27a85813c600..c6cf372d22c5 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -70,7 +70,7 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 
 	DBG("omapfb_setup_plane\n");
 
-	if (ofbi->num_overlays != 1) {
+	if (ofbi->num_overlays == 0) {
 		r = -EINVAL;
 		goto out;
 	}
@@ -185,7 +185,7 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	if (ofbi->num_overlays != 1) {
+	if (ofbi->num_overlays == 0) {
 		memset(pi, 0, sizeof(*pi));
 	} else {
 		struct omap_overlay *ovl;
-- 
cgit v1.2.3


From 3a028bb99d1f1e5c444060a176cbd4bf93530df3 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 10 May 2012 11:15:14 +0300
Subject: OMAPFB: fix parsing of vram parameter

omapfb_parse_vram_param()'s check for end pointer returned from
simple_strtoul() is wrong, causing the code to bug if the second or
later vram parameters are non-parseable, for example
"omapfb.vram=0:2M,:5M".

However, even in that case the code will most likely bail out with
-EINVAL in the following checks, so the bug is probably not a fatal one.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Hein Tibosch <hein_tibosch@yahoo.es>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index b00db4068d21..7f02e7f90d63 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1502,7 +1502,7 @@ static int omapfb_parse_vram_param(const char *param, int max_entries,
 
 		fbnum = simple_strtoul(p, &p, 10);
 
-		if (p == param)
+		if (p == start)
 			return -EINVAL;
 
 		if (*p != ':')
-- 
cgit v1.2.3


From 958f2717b84e88bf833d996997fda8f73276f2af Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 17 Feb 2012 12:19:48 +0200
Subject: OMAPDSS: TFP410: pdata rewrite

To ease device tree adaptation in the future, rewrite TFP410 platform
data handling to be done inside probe(), so that probe() is the only
place where we need to handle the DT/pdata choice.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-tfp410.c | 72 +++++++++++++++--------------
 1 file changed, 38 insertions(+), 34 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 52637fa8fda8..f03964e5b6ab 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -47,13 +47,9 @@ struct panel_drv_data {
 	struct mutex lock;
 
 	int pd_gpio;
-};
 
-static inline struct tfp410_platform_data
-*get_pdata(const struct omap_dss_device *dssdev)
-{
-	return dssdev->data;
-}
+	struct i2c_adapter *i2c_adapter;
+};
 
 static int tfp410_power_on(struct omap_dss_device *dssdev)
 {
@@ -90,11 +86,11 @@ static void tfp410_power_off(struct omap_dss_device *dssdev)
 
 static int tfp410_probe(struct omap_dss_device *dssdev)
 {
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct panel_drv_data *ddata;
 	int r;
+	int i2c_bus_num;
 
-	ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
+	ddata = devm_kzalloc(&dssdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
 
@@ -104,10 +100,15 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
 	ddata->dssdev = dssdev;
 	mutex_init(&ddata->lock);
 
-	if (pdata)
+	if (dssdev->data) {
+		struct tfp410_platform_data *pdata = dssdev->data;
+
 		ddata->pd_gpio = pdata->power_down_gpio;
-	else
+		i2c_bus_num = pdata->i2c_bus_num;
+	} else {
 		ddata->pd_gpio = -1;
+		i2c_bus_num = -1;
+	}
 
 	if (gpio_is_valid(ddata->pd_gpio)) {
 		r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
@@ -115,13 +116,31 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
 		if (r) {
 			dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
 					ddata->pd_gpio);
-			ddata->pd_gpio = -1;
+			return r;
 		}
 	}
 
+	if (i2c_bus_num != -1) {
+		struct i2c_adapter *adapter;
+
+		adapter = i2c_get_adapter(i2c_bus_num);
+		if (!adapter) {
+			dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
+					i2c_bus_num);
+			r = -EINVAL;
+			goto err_i2c;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
 	dev_set_drvdata(&dssdev->dev, ddata);
 
 	return 0;
+err_i2c:
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_free(ddata->pd_gpio);
+	return r;
 }
 
 static void __exit tfp410_remove(struct omap_dss_device *dssdev)
@@ -130,14 +149,15 @@ static void __exit tfp410_remove(struct omap_dss_device *dssdev)
 
 	mutex_lock(&ddata->lock);
 
+	if (ddata->i2c_adapter)
+		i2c_put_adapter(ddata->i2c_adapter);
+
 	if (gpio_is_valid(ddata->pd_gpio))
 		gpio_free(ddata->pd_gpio);
 
 	dev_set_drvdata(&dssdev->dev, NULL);
 
 	mutex_unlock(&ddata->lock);
-
-	kfree(ddata);
 }
 
 static int tfp410_enable(struct omap_dss_device *dssdev)
@@ -269,27 +289,17 @@ static int tfp410_read_edid(struct omap_dss_device *dssdev,
 		u8 *edid, int len)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
-	struct i2c_adapter *adapter;
 	int r, l, bytes_read;
 
 	mutex_lock(&ddata->lock);
 
-	if (pdata->i2c_bus_num == 0) {
+	if (!ddata->i2c_adapter) {
 		r = -ENODEV;
 		goto err;
 	}
 
-	adapter = i2c_get_adapter(pdata->i2c_bus_num);
-	if (!adapter) {
-		dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
-				pdata->i2c_bus_num);
-		r = -EINVAL;
-		goto err;
-	}
-
 	l = min(EDID_LENGTH, len);
-	r = tfp410_ddc_read(adapter, edid, l, 0);
+	r = tfp410_ddc_read(ddata->i2c_adapter, edid, l, 0);
 	if (r)
 		goto err;
 
@@ -299,7 +309,7 @@ static int tfp410_read_edid(struct omap_dss_device *dssdev,
 	if (len > EDID_LENGTH && edid[0x7e] > 0) {
 		l = min(EDID_LENGTH, len - EDID_LENGTH);
 
-		r = tfp410_ddc_read(adapter, edid + EDID_LENGTH,
+		r = tfp410_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
 				l, EDID_LENGTH);
 		if (r)
 			goto err;
@@ -319,21 +329,15 @@ err:
 static bool tfp410_detect(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
-	struct i2c_adapter *adapter;
 	unsigned char out;
 	int r;
 
 	mutex_lock(&ddata->lock);
 
-	if (pdata->i2c_bus_num == 0)
-		goto out;
-
-	adapter = i2c_get_adapter(pdata->i2c_bus_num);
-	if (!adapter)
+	if (!ddata->i2c_adapter)
 		goto out;
 
-	r = tfp410_ddc_read(adapter, &out, 1, 0);
+	r = tfp410_ddc_read(ddata->i2c_adapter, &out, 1, 0);
 
 	mutex_unlock(&ddata->lock);
 
-- 
cgit v1.2.3


From e23d83b0c92bbe30d1fe9d5c0b972e50c6593946 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 10 Jan 2012 11:26:52 +0200
Subject: OMAPDSS: DSI: use dsi_get_dsidev_id(dsidev) instead of dsidev->id

The DSI driver uses dsi_get_dsidev_id() to get the ID number for the DSI
instance. However, there were a few places where dsidev->id was used
instead of the function. Fix those places to use the function.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 446e13667471..a243e65b870f 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2306,7 +2306,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 
 	DSSDBGF();
 
-	r = dsi->enable_pads(dsidev->id, dsi_get_lane_mask(dssdev));
+	r = dsi->enable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
 	if (r)
 		return r;
 
@@ -2416,7 +2416,7 @@ err_cio_pwr:
 		dsi_cio_disable_lane_override(dsidev);
 err_scp_clk_dom:
 	dsi_disable_scp_clk(dsidev);
-	dsi->disable_pads(dsidev->id, dsi_get_lane_mask(dssdev));
+	dsi->disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
 	return r;
 }
 
@@ -2430,7 +2430,7 @@ static void dsi_cio_uninit(struct omap_dss_device *dssdev)
 
 	dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_OFF);
 	dsi_disable_scp_clk(dsidev);
-	dsi->disable_pads(dsidev->id, dsi_get_lane_mask(dssdev));
+	dsi->disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
 }
 
 static void dsi_config_tx_fifo(struct platform_device *dsidev,
-- 
cgit v1.2.3


From 00928eaf52007ee4e1fb7dc860bc02a56c125bb4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 20 Feb 2012 11:50:06 +0200
Subject: OMAPDSS: clean up the omapdss platform data mess

The omapdss pdata handling is a mess. This is more evident when trying
to use device tree for DSS, as we don't have platform data anymore in
that case. This patch cleans the pdata handling by:

- Remove struct omap_display_platform_data. It was used just as a
  wrapper for struct omap_dss_board_info.
- Pass the platform data only to omapdss device. The drivers for omap
  dss hwmods do not need the platform data. This should also work better
  for DT, as we can create omapdss device programmatically in generic omap
  boot code, and thus we can pass the pdata to it.
- Create dss functions for get_ctx_loss_count and dsi_enable/disable_pads
  that the dss hwmod drivers can call.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c  | 35 +++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dispc.c | 21 ++-------------------
 drivers/video/omap2/dss/dsi.c   | 17 +++--------------
 drivers/video/omap2/dss/dss.h   |  3 +++
 drivers/video/omap2/dss/hdmi.c  |  2 --
 5 files changed, 43 insertions(+), 35 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 64cb8aa49b26..b37b6f484c08 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -87,6 +87,41 @@ struct regulator *dss_get_vdds_sdi(void)
 	return reg;
 }
 
+int dss_get_ctx_loss_count(struct device *dev)
+{
+	struct omap_dss_board_info *board_data = core.pdev->dev.platform_data;
+	int cnt;
+
+	if (!board_data->get_context_loss_count)
+		return -ENOENT;
+
+	cnt = board_data->get_context_loss_count(dev);
+
+	WARN_ONCE(cnt < 0, "get_context_loss_count failed: %d\n", cnt);
+
+	return cnt;
+}
+
+int dss_dsi_enable_pads(int dsi_id, unsigned lane_mask)
+{
+	struct omap_dss_board_info *board_data = core.pdev->dev.platform_data;
+
+	if (!board_data->dsi_enable_pads)
+		return -ENOENT;
+
+	return board_data->dsi_enable_pads(dsi_id, lane_mask);
+}
+
+void dss_dsi_disable_pads(int dsi_id, unsigned lane_mask)
+{
+	struct omap_dss_board_info *board_data = core.pdev->dev.platform_data;
+
+	if (!board_data->dsi_enable_pads)
+		return;
+
+	return board_data->dsi_disable_pads(dsi_id, lane_mask);
+}
+
 int dss_set_min_bus_tput(struct device *dev, unsigned long tput)
 {
 	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 727e15b29a14..2c43119b5ade 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -131,23 +131,6 @@ static inline u32 dispc_read_reg(const u16 idx)
 	return __raw_readl(dispc.base + idx);
 }
 
-static int dispc_get_ctx_loss_count(void)
-{
-	struct device *dev = &dispc.pdev->dev;
-	struct omap_display_platform_data *pdata = dev->platform_data;
-	struct omap_dss_board_info *board_data = pdata->board_data;
-	int cnt;
-
-	if (!board_data->get_context_loss_count)
-		return -ENOENT;
-
-	cnt = board_data->get_context_loss_count(dev);
-
-	WARN_ONCE(cnt < 0, "get_context_loss_count failed: %d\n", cnt);
-
-	return cnt;
-}
-
 #define SR(reg) \
 	dispc.ctx[DISPC_##reg / sizeof(u32)] = dispc_read_reg(DISPC_##reg)
 #define RR(reg) \
@@ -251,7 +234,7 @@ static void dispc_save_context(void)
 	if (dss_has_feature(FEAT_CORE_CLK_DIV))
 		SR(DIVISOR);
 
-	dispc.ctx_loss_cnt = dispc_get_ctx_loss_count();
+	dispc.ctx_loss_cnt = dss_get_ctx_loss_count(&dispc.pdev->dev);
 	dispc.ctx_valid = true;
 
 	DSSDBG("context saved, ctx_loss_count %d\n", dispc.ctx_loss_cnt);
@@ -266,7 +249,7 @@ static void dispc_restore_context(void)
 	if (!dispc.ctx_valid)
 		return;
 
-	ctx = dispc_get_ctx_loss_count();
+	ctx = dss_get_ctx_loss_count(&dispc.pdev->dev);
 
 	if (ctx >= 0 && ctx == dispc.ctx_loss_cnt)
 		return;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index a243e65b870f..d18c8e290c85 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -261,9 +261,6 @@ struct dsi_data {
 	struct clk *dss_clk;
 	struct clk *sys_clk;
 
-	int (*enable_pads)(int dsi_id, unsigned lane_mask);
-	void (*disable_pads)(int dsi_id, unsigned lane_mask);
-
 	struct dsi_clock_info current_cinfo;
 
 	bool vdds_dsi_enabled;
@@ -2306,7 +2303,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 
 	DSSDBGF();
 
-	r = dsi->enable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
+	r = dss_dsi_enable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
 	if (r)
 		return r;
 
@@ -2416,21 +2413,20 @@ err_cio_pwr:
 		dsi_cio_disable_lane_override(dsidev);
 err_scp_clk_dom:
 	dsi_disable_scp_clk(dsidev);
-	dsi->disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
+	dss_dsi_disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
 	return r;
 }
 
 static void dsi_cio_uninit(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
 	/* DDR_CLK_ALWAYS_ON */
 	REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 0, 13, 13);
 
 	dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_OFF);
 	dsi_disable_scp_clk(dsidev);
-	dsi->disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
+	dss_dsi_disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
 }
 
 static void dsi_config_tx_fifo(struct platform_device *dsidev,
@@ -4645,8 +4641,6 @@ static void dsi_put_clocks(struct platform_device *dsidev)
 /* DSI1 HW IP initialisation */
 static int omap_dsihw_probe(struct platform_device *dsidev)
 {
-	struct omap_display_platform_data *dss_plat_data;
-	struct omap_dss_board_info *board_info;
 	u32 rev;
 	int r, i, dsi_module = dsi_get_dsidev_id(dsidev);
 	struct resource *dsi_mem;
@@ -4660,11 +4654,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	dsi_pdev_map[dsi_module] = dsidev;
 	dev_set_drvdata(&dsidev->dev, dsi);
 
-	dss_plat_data = dsidev->dev.platform_data;
-	board_info = dss_plat_data->board_data;
-	dsi->enable_pads = board_info->dsi_enable_pads;
-	dsi->disable_pads = board_info->dsi_disable_pads;
-
 	spin_lock_init(&dsi->irq_lock);
 	spin_lock_init(&dsi->errors_lock);
 	dsi->errors = 0;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 8e9e9a5765fa..848fc9cd65d4 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -159,6 +159,9 @@ struct platform_device;
 struct bus_type *dss_get_bus(void);
 struct regulator *dss_get_vdds_dsi(void);
 struct regulator *dss_get_vdds_sdi(void);
+int dss_get_ctx_loss_count(struct device *dev);
+int dss_dsi_enable_pads(int dsi_id, unsigned lane_mask);
+void dss_dsi_disable_pads(int dsi_id, unsigned lane_mask);
 int dss_set_min_bus_tput(struct device *dev, unsigned long tput);
 
 /* apply */
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 32ad7124a952..043eac676786 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -63,7 +63,6 @@
 
 static struct {
 	struct mutex lock;
-	struct omap_display_platform_data *pdata;
 	struct platform_device *pdev;
 	struct hdmi_ip_data ip_data;
 
@@ -797,7 +796,6 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev)
 	struct resource *hdmi_mem;
 	int r;
 
-	hdmi.pdata = pdev->dev.platform_data;
 	hdmi.pdev = pdev;
 
 	mutex_init(&hdmi.lock);
-- 
cgit v1.2.3


From 04c742c3dccac296fdc52b464bd0491ffe88de23 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 23 Feb 2012 15:32:37 +0200
Subject: OMAPDSS: remove return from platform_driver_unreg

For unknown reasons we seem to have a return in each of the omapdss's
uninit functions, which is a void function.

Remove the returns.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 2 +-
 drivers/video/omap2/dss/dsi.c   | 2 +-
 drivers/video/omap2/dss/dss.c   | 2 +-
 drivers/video/omap2/dss/hdmi.c  | 2 +-
 drivers/video/omap2/dss/rfbi.c  | 2 +-
 drivers/video/omap2/dss/venc.c  | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 2c43119b5ade..4623bd97a1af 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3611,5 +3611,5 @@ int dispc_init_platform_driver(void)
 
 void dispc_uninit_platform_driver(void)
 {
-	return platform_driver_unregister(&omap_dispchw_driver);
+	platform_driver_unregister(&omap_dispchw_driver);
 }
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d18c8e290c85..43eeb0d04d47 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4814,5 +4814,5 @@ int dsi_init_platform_driver(void)
 
 void dsi_uninit_platform_driver(void)
 {
-	return platform_driver_unregister(&omap_dsihw_driver);
+	platform_driver_unregister(&omap_dsihw_driver);
 }
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index e212acb1e7d5..3a0655020252 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -874,5 +874,5 @@ int dss_init_platform_driver(void)
 
 void dss_uninit_platform_driver(void)
 {
-	return platform_driver_unregister(&omap_dsshw_driver);
+	platform_driver_unregister(&omap_dsshw_driver);
 }
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 043eac676786..1d73ee7a5367 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -916,5 +916,5 @@ int hdmi_init_platform_driver(void)
 
 void hdmi_uninit_platform_driver(void)
 {
-	return platform_driver_unregister(&omapdss_hdmihw_driver);
+	platform_driver_unregister(&omapdss_hdmihw_driver);
 }
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index feadfab27ec2..31c992662457 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -1039,5 +1039,5 @@ int rfbi_init_platform_driver(void)
 
 void rfbi_uninit_platform_driver(void)
 {
-	return platform_driver_unregister(&omap_rfbihw_driver);
+	platform_driver_unregister(&omap_rfbihw_driver);
 }
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 9475e6edce68..1884e347b630 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -959,5 +959,5 @@ void venc_uninit_platform_driver(void)
 	if (cpu_is_omap44xx())
 		return;
 
-	return platform_driver_unregister(&omap_venchw_driver);
+	platform_driver_unregister(&omap_venchw_driver);
 }
-- 
cgit v1.2.3


From 11436e1dd2aab1a33f81a3737ec8641788ec8543 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 7 Mar 2012 12:53:18 +0200
Subject: OMAPDSS: use platform_driver_probe for core/dispc/dss

The platform devices for omapdss, dss and dispc drivers are always
present, so we can use platform_driver_probe instead of
platform_driver_register.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c  | 3 +--
 drivers/video/omap2/dss/dispc.c | 3 +--
 drivers/video/omap2/dss/dss.c   | 3 +--
 3 files changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index b37b6f484c08..db45e6abe311 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -296,7 +296,6 @@ static int omap_dss_resume(struct platform_device *pdev)
 }
 
 static struct platform_driver omap_dss_driver = {
-	.probe          = omap_dss_probe,
 	.remove         = omap_dss_remove,
 	.shutdown	= omap_dss_shutdown,
 	.suspend	= omap_dss_suspend,
@@ -521,7 +520,7 @@ static int __init omap_dss_register_drivers(void)
 {
 	int r;
 
-	r = platform_driver_register(&omap_dss_driver);
+	r = platform_driver_probe(&omap_dss_driver, omap_dss_probe);
 	if (r)
 		return r;
 
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 4623bd97a1af..242efe9f702a 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3595,7 +3595,6 @@ static const struct dev_pm_ops dispc_pm_ops = {
 };
 
 static struct platform_driver omap_dispchw_driver = {
-	.probe          = omap_dispchw_probe,
 	.remove         = omap_dispchw_remove,
 	.driver         = {
 		.name   = "omapdss_dispc",
@@ -3606,7 +3605,7 @@ static struct platform_driver omap_dispchw_driver = {
 
 int dispc_init_platform_driver(void)
 {
-	return platform_driver_register(&omap_dispchw_driver);
+	return platform_driver_probe(&omap_dispchw_driver, omap_dispchw_probe);
 }
 
 void dispc_uninit_platform_driver(void)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 3a0655020252..c849d8bd5256 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -858,7 +858,6 @@ static const struct dev_pm_ops dss_pm_ops = {
 };
 
 static struct platform_driver omap_dsshw_driver = {
-	.probe          = omap_dsshw_probe,
 	.remove         = omap_dsshw_remove,
 	.driver         = {
 		.name   = "omapdss_dss",
@@ -869,7 +868,7 @@ static struct platform_driver omap_dsshw_driver = {
 
 int dss_init_platform_driver(void)
 {
-	return platform_driver_register(&omap_dsshw_driver);
+	return platform_driver_probe(&omap_dsshw_driver, omap_dsshw_probe);
 }
 
 void dss_uninit_platform_driver(void)
-- 
cgit v1.2.3


From a57dd4fe7bef557afaa1a6cdb77cd95b2cba094e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 20 Feb 2012 16:57:37 +0200
Subject: OMAPDSS: create DPI & SDI drivers

We currently have separate device/driver for each DSS HW module. The DPI
and SDI outputs are more or less parts of the DSS or DISPC hardware
modules, but in SW it makes sense to represent them as device/driver
pairs similarly to all the other outputs. This also makes sense for
device tree, as each node under dss will be a platform device, and
handling DPI & SDI somehow differently than the rest would just make the
code more complex.

This patch modifies the dpi.c and sdi.c to create drivers for the
platform devices.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c | 18 ++++++++++++++++++
 drivers/video/omap2/dss/dpi.c  | 23 +++++++++++++++++++++--
 drivers/video/omap2/dss/dss.c  | 20 +-------------------
 drivers/video/omap2/dss/dss.h  | 26 ++++++++------------------
 drivers/video/omap2/dss/sdi.c  | 25 +++++++++++++++++++++++--
 5 files changed, 71 insertions(+), 41 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index db45e6abe311..77fbd99295dc 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -536,6 +536,18 @@ static int __init omap_dss_register_drivers(void)
 		goto err_dispc;
 	}
 
+	r = dpi_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize dpi platform driver\n");
+		goto err_dpi;
+	}
+
+	r = sdi_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize sdi platform driver\n");
+		goto err_sdi;
+	}
+
 	r = rfbi_init_platform_driver();
 	if (r) {
 		DSSERR("Failed to initialize rfbi platform driver\n");
@@ -569,6 +581,10 @@ err_dsi:
 err_venc:
 	rfbi_uninit_platform_driver();
 err_rfbi:
+	sdi_uninit_platform_driver();
+err_sdi:
+	dpi_uninit_platform_driver();
+err_dpi:
 	dispc_uninit_platform_driver();
 err_dispc:
 	dss_uninit_platform_driver();
@@ -584,6 +600,8 @@ static void __exit omap_dss_unregister_drivers(void)
 	dsi_uninit_platform_driver();
 	venc_uninit_platform_driver();
 	rfbi_uninit_platform_driver();
+	sdi_uninit_platform_driver();
+	dpi_uninit_platform_driver();
 	dispc_uninit_platform_driver();
 	dss_uninit_platform_driver();
 
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index d6e8fe776152..79d242a42607 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -379,12 +379,31 @@ int dpi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-int dpi_init(void)
+static int omap_dpi_probe(struct platform_device *pdev)
 {
 	return 0;
 }
 
-void dpi_exit(void)
+static int omap_dpi_remove(struct platform_device *pdev)
 {
+	return 0;
 }
 
+static struct platform_driver omap_dpi_driver = {
+	.probe		= omap_dpi_probe,
+	.remove         = omap_dpi_remove,
+	.driver         = {
+		.name   = "omapdss_dpi",
+		.owner  = THIS_MODULE,
+	},
+};
+
+int dpi_init_platform_driver(void)
+{
+	return platform_driver_register(&omap_dpi_driver);
+}
+
+void dpi_uninit_platform_driver(void)
+{
+	platform_driver_unregister(&omap_dpi_driver);
+}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index c849d8bd5256..7a7ddd8fbf5e 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -786,18 +786,6 @@ static int omap_dsshw_probe(struct platform_device *pdev)
 	dss.lcd_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
 	dss.lcd_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
 
-	r = dpi_init();
-	if (r) {
-		DSSERR("Failed to initialize DPI\n");
-		goto err_dpi;
-	}
-
-	r = sdi_init();
-	if (r) {
-		DSSERR("Failed to initialize SDI\n");
-		goto err_sdi;
-	}
-
 	rev = dss_read_reg(DSS_REVISION);
 	printk(KERN_INFO "OMAP DSS rev %d.%d\n",
 			FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -805,10 +793,7 @@ static int omap_dsshw_probe(struct platform_device *pdev)
 	dss_runtime_put();
 
 	return 0;
-err_sdi:
-	dpi_exit();
-err_dpi:
-	dss_runtime_put();
+
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 	dss_put_clocks();
@@ -817,9 +802,6 @@ err_runtime_get:
 
 static int omap_dsshw_remove(struct platform_device *pdev)
 {
-	dpi_exit();
-	sdi_exit();
-
 	pm_runtime_disable(&pdev->dev);
 
 	dss_put_clocks();
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 848fc9cd65d4..5496134c280b 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -272,17 +272,12 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
 
 /* SDI */
 #ifdef CONFIG_OMAP2_DSS_SDI
-int sdi_init(void);
-void sdi_exit(void);
+int sdi_init_platform_driver(void);
+void sdi_uninit_platform_driver(void);
 int sdi_init_display(struct omap_dss_device *display);
 #else
-static inline int sdi_init(void)
-{
-	return 0;
-}
-static inline void sdi_exit(void)
-{
-}
+static inline int sdi_init_platform_driver(void) { return 0; }
+static inline void sdi_uninit_platform_driver(void) { }
 #endif
 
 /* DSI */
@@ -384,17 +379,12 @@ static inline struct platform_device *dsi_get_dsidev_from_id(int module)
 
 /* DPI */
 #ifdef CONFIG_OMAP2_DSS_DPI
-int dpi_init(void);
-void dpi_exit(void);
+int dpi_init_platform_driver(void);
+void dpi_uninit_platform_driver(void);
 int dpi_init_display(struct omap_dss_device *dssdev);
 #else
-static inline int dpi_init(void)
-{
-	return 0;
-}
-static inline void dpi_exit(void)
-{
-}
+static inline int dpi_init_platform_driver(void) { return 0; }
+static inline void dpi_uninit_platform_driver(void) { }
 #endif
 
 /* DISPC */
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 67fbe7cee412..4ae2d8f55048 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>
 #include <linux/export.h>
+#include <linux/platform_device.h>
 
 #include <video/omapdss.h>
 #include "dss.h"
@@ -182,11 +183,31 @@ int sdi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-int sdi_init(void)
+static int omap_sdi_probe(struct platform_device *pdev)
 {
 	return 0;
 }
 
-void sdi_exit(void)
+static int omap_sdi_remove(struct platform_device *pdev)
 {
+	return 0;
+}
+
+static struct platform_driver omap_sdi_driver = {
+	.probe		= omap_sdi_probe,
+	.remove         = omap_sdi_remove,
+	.driver         = {
+		.name   = "omapdss_sdi",
+		.owner  = THIS_MODULE,
+	},
+};
+
+int sdi_init_platform_driver(void)
+{
+	return platform_driver_register(&omap_sdi_driver);
+}
+
+void sdi_uninit_platform_driver(void)
+{
+	platform_driver_unregister(&omap_sdi_driver);
 }
-- 
cgit v1.2.3


From 852f083843af618eaa8997f7803c9aed8293fdf9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 17 Feb 2012 17:58:04 +0200
Subject: OMAPDSS: remove uses of dss_runtime_get/put

Now that the omapdss_core device is the parent for all other dss
devices, we don't need to use the dss_runtime_get/put anymore. Instead,
enabling omapdss_core will happen automatically when a child device is
enabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c |  7 -------
 drivers/video/omap2/dss/dpi.c   | 16 +---------------
 drivers/video/omap2/dss/dsi.c   | 12 +-----------
 drivers/video/omap2/dss/dss.c   |  7 +++++--
 drivers/video/omap2/dss/dss.h   |  3 ---
 drivers/video/omap2/dss/hdmi.c  | 34 ++--------------------------------
 drivers/video/omap2/dss/rfbi.c  | 12 +-----------
 drivers/video/omap2/dss/sdi.c   |  7 -------
 drivers/video/omap2/dss/venc.c  | 12 +-----------
 9 files changed, 11 insertions(+), 99 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 242efe9f702a..25707732cb68 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3571,19 +3571,12 @@ static int omap_dispchw_remove(struct platform_device *pdev)
 static int dispc_runtime_suspend(struct device *dev)
 {
 	dispc_save_context();
-	dss_runtime_put();
 
 	return 0;
 }
 
 static int dispc_runtime_resume(struct device *dev)
 {
-	int r;
-
-	r = dss_runtime_get();
-	if (r < 0)
-		return r;
-
 	dispc_restore_context();
 
 	return 0;
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 79d242a42607..0bb2c48db817 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -202,10 +202,6 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 			goto err_reg_enable;
 	}
 
-	r = dss_runtime_get();
-	if (r)
-		goto err_get_dss;
-
 	r = dispc_runtime_get();
 	if (r)
 		goto err_get_dispc;
@@ -244,8 +240,6 @@ err_dsi_pll_init:
 err_get_dsi:
 	dispc_runtime_put();
 err_get_dispc:
-	dss_runtime_put();
-err_get_dss:
 	if (cpu_is_omap34xx())
 		regulator_disable(dpi.vdds_dsi_reg);
 err_reg_enable:
@@ -266,7 +260,6 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 	}
 
 	dispc_runtime_put();
-	dss_runtime_put();
 
 	if (cpu_is_omap34xx())
 		regulator_disable(dpi.vdds_dsi_reg);
@@ -283,20 +276,13 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
 	DSSDBG("dpi_set_timings\n");
 	dssdev->panel.timings = *timings;
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		r = dss_runtime_get();
-		if (r)
-			return;
-
 		r = dispc_runtime_get();
-		if (r) {
-			dss_runtime_put();
+		if (r)
 			return;
-		}
 
 		dpi_set_mode(dssdev);
 
 		dispc_runtime_put();
-		dss_runtime_put();
 	} else {
 		dss_mgr_set_timings(dssdev->manager, timings);
 	}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 43eeb0d04d47..9fdeb2131987 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4767,7 +4767,6 @@ static int omap_dsihw_remove(struct platform_device *dsidev)
 static int dsi_runtime_suspend(struct device *dev)
 {
 	dispc_runtime_put();
-	dss_runtime_put();
 
 	return 0;
 }
@@ -4776,20 +4775,11 @@ static int dsi_runtime_resume(struct device *dev)
 {
 	int r;
 
-	r = dss_runtime_get();
-	if (r)
-		goto err_get_dss;
-
 	r = dispc_runtime_get();
 	if (r)
-		goto err_get_dispc;
+		return r;
 
 	return 0;
-
-err_get_dispc:
-	dss_runtime_put();
-err_get_dss:
-	return r;
 }
 
 static const struct dev_pm_ops dsi_pm_ops = {
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 7a7ddd8fbf5e..900002a6c7dd 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -62,6 +62,9 @@ struct dss_reg {
 #define REG_FLD_MOD(idx, val, start, end) \
 	dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end))
 
+static int dss_runtime_get(void);
+static void dss_runtime_put(void);
+
 static struct {
 	struct platform_device *pdev;
 	void __iomem    *base;
@@ -707,7 +710,7 @@ static void dss_put_clocks(void)
 	clk_put(dss.dss_clk);
 }
 
-int dss_runtime_get(void)
+static int dss_runtime_get(void)
 {
 	int r;
 
@@ -718,7 +721,7 @@ int dss_runtime_get(void)
 	return r < 0 ? r : 0;
 }
 
-void dss_runtime_put(void)
+static void dss_runtime_put(void)
 {
 	int r;
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 5496134c280b..28a856822a87 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -233,9 +233,6 @@ int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
 int dss_init_platform_driver(void);
 void dss_uninit_platform_driver(void);
 
-int dss_runtime_get(void);
-void dss_runtime_put(void);
-
 void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
 enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void);
 const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 1d73ee7a5367..45e98419d952 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -129,25 +129,12 @@ static int hdmi_runtime_get(void)
 
 	DSSDBG("hdmi_runtime_get\n");
 
-	/*
-	 * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled.
-	 * This should be removed later.
-	 */
-	r = dss_runtime_get();
-	if (r < 0)
-		goto err_get_dss;
-
 	r = pm_runtime_get_sync(&hdmi.pdev->dev);
 	WARN_ON(r < 0);
 	if (r < 0)
-		goto err_get_hdmi;
+		return r;
 
 	return 0;
-
-err_get_hdmi:
-	dss_runtime_put();
-err_get_dss:
-	return r;
 }
 
 static void hdmi_runtime_put(void)
@@ -158,12 +145,6 @@ static void hdmi_runtime_put(void)
 
 	r = pm_runtime_put_sync(&hdmi.pdev->dev);
 	WARN_ON(r < 0);
-
-	/*
-	 * HACK: This is added to complement the dss_runtime_get() call in
-	 * hdmi_runtime_get(). This should be removed later.
-	 */
-	dss_runtime_put();
 }
 
 int hdmi_init_display(struct omap_dss_device *dssdev)
@@ -866,7 +847,6 @@ static int hdmi_runtime_suspend(struct device *dev)
 	clk_disable(hdmi.sys_clk);
 
 	dispc_runtime_put();
-	dss_runtime_put();
 
 	return 0;
 }
@@ -875,23 +855,13 @@ static int hdmi_runtime_resume(struct device *dev)
 {
 	int r;
 
-	r = dss_runtime_get();
-	if (r < 0)
-		goto err_get_dss;
-
 	r = dispc_runtime_get();
 	if (r < 0)
-		goto err_get_dispc;
-
+		return r;
 
 	clk_enable(hdmi.sys_clk);
 
 	return 0;
-
-err_get_dispc:
-	dss_runtime_put();
-err_get_dss:
-	return r;
 }
 
 static const struct dev_pm_ops hdmi_pm_ops = {
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 31c992662457..c5e69068489d 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -992,7 +992,6 @@ static int omap_rfbihw_remove(struct platform_device *pdev)
 static int rfbi_runtime_suspend(struct device *dev)
 {
 	dispc_runtime_put();
-	dss_runtime_put();
 
 	return 0;
 }
@@ -1001,20 +1000,11 @@ static int rfbi_runtime_resume(struct device *dev)
 {
 	int r;
 
-	r = dss_runtime_get();
-	if (r < 0)
-		goto err_get_dss;
-
 	r = dispc_runtime_get();
 	if (r < 0)
-		goto err_get_dispc;
+		return r;
 
 	return 0;
-
-err_get_dispc:
-	dss_runtime_put();
-err_get_dss:
-	return r;
 }
 
 static const struct dev_pm_ops rfbi_pm_ops = {
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 4ae2d8f55048..9e3ee87ffc9c 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -72,10 +72,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_reg_enable;
 
-	r = dss_runtime_get();
-	if (r)
-		goto err_get_dss;
-
 	r = dispc_runtime_get();
 	if (r)
 		goto err_get_dispc;
@@ -138,8 +134,6 @@ err_set_dss_clock_div:
 err_calc_clock_div:
 	dispc_runtime_put();
 err_get_dispc:
-	dss_runtime_put();
-err_get_dss:
 	regulator_disable(sdi.vdds_sdi_reg);
 err_reg_enable:
 	omap_dss_stop_device(dssdev);
@@ -155,7 +149,6 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 	dss_sdi_disable();
 
 	dispc_runtime_put();
-	dss_runtime_put();
 
 	regulator_disable(sdi.vdds_sdi_reg);
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 1884e347b630..90b57c5317bf 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -903,7 +903,6 @@ static int venc_runtime_suspend(struct device *dev)
 		clk_disable(venc.tv_dac_clk);
 
 	dispc_runtime_put();
-	dss_runtime_put();
 
 	return 0;
 }
@@ -912,23 +911,14 @@ static int venc_runtime_resume(struct device *dev)
 {
 	int r;
 
-	r = dss_runtime_get();
-	if (r < 0)
-		goto err_get_dss;
-
 	r = dispc_runtime_get();
 	if (r < 0)
-		goto err_get_dispc;
+		return r;
 
 	if (venc.tv_dac_clk)
 		clk_enable(venc.tv_dac_clk);
 
 	return 0;
-
-err_get_dispc:
-	dss_runtime_put();
-err_get_dss:
-	return r;
 }
 
 static const struct dev_pm_ops venc_pm_ops = {
-- 
cgit v1.2.3


From 461395c464e559a01cbc66d97ed4b8585b437cf9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 2 Mar 2012 17:37:53 +0200
Subject: OMAPDSS: handle output-driver reg/unreg more dynamically

Initialize and uninitialize the output drivers by using arrays of
pointers to the init/uninit functions. This simplifies the code
slightly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c | 111 ++++++++++++++++++++++-------------------
 drivers/video/omap2/dss/dss.h  |  41 ---------------
 2 files changed, 59 insertions(+), 93 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 77fbd99295dc..2a0cbaeed211 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -515,10 +515,54 @@ static int omap_dss_bus_register(void)
 }
 
 /* INIT */
+static int (*dss_output_drv_reg_funcs[])(void) __initdata = {
+#ifdef CONFIG_OMAP2_DSS_DPI
+	dpi_init_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_SDI
+	sdi_init_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_RFBI
+	rfbi_init_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_VENC
+	venc_init_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_DSI
+	dsi_init_platform_driver,
+#endif
+#ifdef CONFIG_OMAP4_DSS_HDMI
+	hdmi_init_platform_driver,
+#endif
+};
+
+static void (*dss_output_drv_unreg_funcs[])(void) __exitdata = {
+#ifdef CONFIG_OMAP2_DSS_DPI
+	dpi_uninit_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_SDI
+	sdi_uninit_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_RFBI
+	rfbi_uninit_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_VENC
+	venc_uninit_platform_driver,
+#endif
+#ifdef CONFIG_OMAP2_DSS_DSI
+	dsi_uninit_platform_driver,
+#endif
+#ifdef CONFIG_OMAP4_DSS_HDMI
+	hdmi_uninit_platform_driver,
+#endif
+};
+
+static bool dss_output_drv_loaded[ARRAY_SIZE(dss_output_drv_reg_funcs)];
 
 static int __init omap_dss_register_drivers(void)
 {
 	int r;
+	int i;
 
 	r = platform_driver_probe(&omap_dss_driver, omap_dss_probe);
 	if (r)
@@ -536,56 +580,18 @@ static int __init omap_dss_register_drivers(void)
 		goto err_dispc;
 	}
 
-	r = dpi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize dpi platform driver\n");
-		goto err_dpi;
-	}
-
-	r = sdi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize sdi platform driver\n");
-		goto err_sdi;
-	}
-
-	r = rfbi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize rfbi platform driver\n");
-		goto err_rfbi;
-	}
-
-	r = venc_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize venc platform driver\n");
-		goto err_venc;
-	}
-
-	r = dsi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize DSI platform driver\n");
-		goto err_dsi;
-	}
-
-	r = hdmi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize hdmi\n");
-		goto err_hdmi;
+	/*
+	 * It's ok if the output-driver register fails. It happens, for example,
+	 * when there is no output-device (e.g. SDI for OMAP4).
+	 */
+	for (i = 0; i < ARRAY_SIZE(dss_output_drv_reg_funcs); ++i) {
+		r = dss_output_drv_reg_funcs[i]();
+		if (r == 0)
+			dss_output_drv_loaded[i] = true;
 	}
 
 	return 0;
 
-err_hdmi:
-	dsi_uninit_platform_driver();
-err_dsi:
-	venc_uninit_platform_driver();
-err_venc:
-	rfbi_uninit_platform_driver();
-err_rfbi:
-	sdi_uninit_platform_driver();
-err_sdi:
-	dpi_uninit_platform_driver();
-err_dpi:
-	dispc_uninit_platform_driver();
 err_dispc:
 	dss_uninit_platform_driver();
 err_dss:
@@ -596,12 +602,13 @@ err_dss:
 
 static void __exit omap_dss_unregister_drivers(void)
 {
-	hdmi_uninit_platform_driver();
-	dsi_uninit_platform_driver();
-	venc_uninit_platform_driver();
-	rfbi_uninit_platform_driver();
-	sdi_uninit_platform_driver();
-	dpi_uninit_platform_driver();
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dss_output_drv_unreg_funcs); ++i) {
+		if (dss_output_drv_loaded[i])
+			dss_output_drv_unreg_funcs[i]();
+	}
+
 	dispc_uninit_platform_driver();
 	dss_uninit_platform_driver();
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 28a856822a87..ce0feb17c642 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -268,14 +268,9 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
 		struct dispc_clock_info *dispc_cinfo);
 
 /* SDI */
-#ifdef CONFIG_OMAP2_DSS_SDI
 int sdi_init_platform_driver(void);
 void sdi_uninit_platform_driver(void);
 int sdi_init_display(struct omap_dss_device *display);
-#else
-static inline int sdi_init_platform_driver(void) { return 0; }
-static inline void sdi_uninit_platform_driver(void) { }
-#endif
 
 /* DSI */
 #ifdef CONFIG_OMAP2_DSS_DSI
@@ -312,13 +307,6 @@ void dsi_wait_pll_hsdiv_dispc_active(struct platform_device *dsidev);
 void dsi_wait_pll_hsdiv_dsi_active(struct platform_device *dsidev);
 struct platform_device *dsi_get_dsidev_from_id(int module);
 #else
-static inline int dsi_init_platform_driver(void)
-{
-	return 0;
-}
-static inline void dsi_uninit_platform_driver(void)
-{
-}
 static inline int dsi_runtime_get(struct platform_device *dsidev)
 {
 	return 0;
@@ -375,14 +363,9 @@ static inline struct platform_device *dsi_get_dsidev_from_id(int module)
 #endif
 
 /* DPI */
-#ifdef CONFIG_OMAP2_DSS_DPI
 int dpi_init_platform_driver(void);
 void dpi_uninit_platform_driver(void);
 int dpi_init_display(struct omap_dss_device *dssdev);
-#else
-static inline int dpi_init_platform_driver(void) { return 0; }
-static inline void dpi_uninit_platform_driver(void) { }
-#endif
 
 /* DISPC */
 int dispc_init_platform_driver(void);
@@ -459,13 +442,6 @@ void venc_dump_regs(struct seq_file *s);
 int venc_init_display(struct omap_dss_device *display);
 unsigned long venc_get_pixel_clock(void);
 #else
-static inline int venc_init_platform_driver(void)
-{
-	return 0;
-}
-static inline void venc_uninit_platform_driver(void)
-{
-}
 static inline unsigned long venc_get_pixel_clock(void)
 {
 	WARN("%s: VENC not compiled in, returning pclk as 0\n", __func__);
@@ -485,13 +461,6 @@ static inline int hdmi_init_display(struct omap_dss_device *dssdev)
 {
 	return 0;
 }
-static inline int hdmi_init_platform_driver(void)
-{
-	return 0;
-}
-static inline void hdmi_uninit_platform_driver(void)
-{
-}
 static inline unsigned long hdmi_get_pixel_clock(void)
 {
 	WARN("%s: HDMI not compiled in, returning pclk as 0\n", __func__);
@@ -509,20 +478,10 @@ int hdmi_panel_init(void);
 void hdmi_panel_exit(void);
 
 /* RFBI */
-#ifdef CONFIG_OMAP2_DSS_RFBI
 int rfbi_init_platform_driver(void);
 void rfbi_uninit_platform_driver(void);
 void rfbi_dump_regs(struct seq_file *s);
 int rfbi_init_display(struct omap_dss_device *display);
-#else
-static inline int rfbi_init_platform_driver(void)
-{
-	return 0;
-}
-static inline void rfbi_uninit_platform_driver(void)
-{
-}
-#endif
 
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
-- 
cgit v1.2.3


From e40402cf182e798fd71824f4ad02fb51ce599bb2 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 2 Mar 2012 18:01:07 +0200
Subject: OMAPDSS: move the creation of debugfs files

Instead of having an ugly #ifdef mess in the core.c for creating debugfs
files, add a dss_debugfs_create_file() function that the dss drivers
can use to create the debugfs files.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c  | 46 ++++++++++++++++-------------------------
 drivers/video/omap2/dss/dispc.c |  7 ++++++-
 drivers/video/omap2/dss/dsi.c   | 42 ++++++++++---------------------------
 drivers/video/omap2/dss/dss.c   |  4 +++-
 drivers/video/omap2/dss/dss.h   | 11 +---------
 drivers/video/omap2/dss/hdmi.c  |  4 +++-
 drivers/video/omap2/dss/rfbi.c  |  4 +++-
 drivers/video/omap2/dss/venc.c  |  4 +++-
 8 files changed, 48 insertions(+), 74 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 2a0cbaeed211..c54bba04cb00 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -166,34 +166,6 @@ static int dss_initialize_debugfs(void)
 	debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
 			&dss_debug_dump_clocks, &dss_debug_fops);
 
-#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
-	debugfs_create_file("dispc_irq", S_IRUGO, dss_debugfs_dir,
-			&dispc_dump_irqs, &dss_debug_fops);
-#endif
-
-#if defined(CONFIG_OMAP2_DSS_DSI) && defined(CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS)
-	dsi_create_debugfs_files_irq(dss_debugfs_dir, &dss_debug_fops);
-#endif
-
-	debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir,
-			&dss_dump_regs, &dss_debug_fops);
-	debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir,
-			&dispc_dump_regs, &dss_debug_fops);
-#ifdef CONFIG_OMAP2_DSS_RFBI
-	debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir,
-			&rfbi_dump_regs, &dss_debug_fops);
-#endif
-#ifdef CONFIG_OMAP2_DSS_DSI
-	dsi_create_debugfs_files_reg(dss_debugfs_dir, &dss_debug_fops);
-#endif
-#ifdef CONFIG_OMAP2_DSS_VENC
-	debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir,
-			&venc_dump_regs, &dss_debug_fops);
-#endif
-#ifdef CONFIG_OMAP4_DSS_HDMI
-	debugfs_create_file("hdmi", S_IRUGO, dss_debugfs_dir,
-			&hdmi_dump_regs, &dss_debug_fops);
-#endif
 	return 0;
 }
 
@@ -202,6 +174,19 @@ static void dss_uninitialize_debugfs(void)
 	if (dss_debugfs_dir)
 		debugfs_remove_recursive(dss_debugfs_dir);
 }
+
+int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *))
+{
+	struct dentry *d;
+
+	d = debugfs_create_file(name, S_IRUGO, dss_debugfs_dir,
+			write, &dss_debug_fops);
+
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+
+	return 0;
+}
 #else /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
 static inline int dss_initialize_debugfs(void)
 {
@@ -210,6 +195,11 @@ static inline int dss_initialize_debugfs(void)
 static inline void dss_uninitialize_debugfs(void)
 {
 }
+static inline int dss_debugfs_create_file(const char *name,
+		void (*write)(struct seq_file *))
+{
+	return 0;
+}
 #endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
 
 /* PLATFORM DEVICE */
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 25707732cb68..534f931229cd 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2761,7 +2761,7 @@ void dispc_dump_irqs(struct seq_file *s)
 }
 #endif
 
-void dispc_dump_regs(struct seq_file *s)
+static void dispc_dump_regs(struct seq_file *s)
 {
 	int i, j;
 	const char *mgr_names[] = {
@@ -3551,6 +3551,11 @@ static int omap_dispchw_probe(struct platform_device *pdev)
 
 	dispc_runtime_put();
 
+	dss_debugfs_create_file("dispc", dispc_dump_regs);
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+	dss_debugfs_create_file("dispc_irq", dispc_dump_irqs);
+#endif
 	return 0;
 
 err_runtime_get:
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 9fdeb2131987..d5d80f92ce35 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1852,22 +1852,6 @@ static void dsi2_dump_irqs(struct seq_file *s)
 
 	dsi_dump_dsidev_irqs(dsidev, s);
 }
-
-void dsi_create_debugfs_files_irq(struct dentry *debugfs_dir,
-		const struct file_operations *debug_fops)
-{
-	struct platform_device *dsidev;
-
-	dsidev = dsi_get_dsidev_from_id(0);
-	if (dsidev)
-		debugfs_create_file("dsi1_irqs", S_IRUGO, debugfs_dir,
-			&dsi1_dump_irqs, debug_fops);
-
-	dsidev = dsi_get_dsidev_from_id(1);
-	if (dsidev)
-		debugfs_create_file("dsi2_irqs", S_IRUGO, debugfs_dir,
-			&dsi2_dump_irqs, debug_fops);
-}
 #endif
 
 static void dsi_dump_dsidev_regs(struct platform_device *dsidev,
@@ -1968,21 +1952,6 @@ static void dsi2_dump_regs(struct seq_file *s)
 	dsi_dump_dsidev_regs(dsidev, s);
 }
 
-void dsi_create_debugfs_files_reg(struct dentry *debugfs_dir,
-		const struct file_operations *debug_fops)
-{
-	struct platform_device *dsidev;
-
-	dsidev = dsi_get_dsidev_from_id(0);
-	if (dsidev)
-		debugfs_create_file("dsi1_regs", S_IRUGO, debugfs_dir,
-			&dsi1_dump_regs, debug_fops);
-
-	dsidev = dsi_get_dsidev_from_id(1);
-	if (dsidev)
-		debugfs_create_file("dsi2_regs", S_IRUGO, debugfs_dir,
-			&dsi2_dump_regs, debug_fops);
-}
 enum dsi_cio_power_state {
 	DSI_COMPLEXIO_POWER_OFF		= 0x0,
 	DSI_COMPLEXIO_POWER_ON		= 0x1,
@@ -4733,6 +4702,17 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	dsi_runtime_put(dsidev);
 
+	if (dsi_module == 0)
+		dss_debugfs_create_file("dsi1_regs", dsi1_dump_regs);
+	else if (dsi_module == 1)
+		dss_debugfs_create_file("dsi2_regs", dsi2_dump_regs);
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+	if (dsi_module == 0)
+		dss_debugfs_create_file("dsi1_irqs", dsi1_dump_irqs);
+	else if (dsi_module == 1)
+		dss_debugfs_create_file("dsi2_irqs", dsi2_dump_irqs);
+#endif
 	return 0;
 
 err_runtime_get:
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 900002a6c7dd..08bee78191d6 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -280,7 +280,7 @@ void dss_dump_clocks(struct seq_file *s)
 	dss_runtime_put();
 }
 
-void dss_dump_regs(struct seq_file *s)
+static void dss_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r))
 
@@ -795,6 +795,8 @@ static int omap_dsshw_probe(struct platform_device *pdev)
 
 	dss_runtime_put();
 
+	dss_debugfs_create_file("dss", dss_dump_regs);
+
 	return 0;
 
 err_runtime_get:
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index ce0feb17c642..5faddf06aa0b 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -163,6 +163,7 @@ int dss_get_ctx_loss_count(struct device *dev);
 int dss_dsi_enable_pads(int dsi_id, unsigned lane_mask);
 void dss_dsi_disable_pads(int dsi_id, unsigned lane_mask);
 int dss_set_min_bus_tput(struct device *dev, unsigned long tput);
+int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *));
 
 /* apply */
 void dss_apply_init(void);
@@ -238,7 +239,6 @@ enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void);
 const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
 void dss_dump_clocks(struct seq_file *s);
 
-void dss_dump_regs(struct seq_file *s);
 #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
 void dss_debug_dump_clocks(struct seq_file *s);
 #endif
@@ -285,10 +285,6 @@ int dsi_runtime_get(struct platform_device *dsidev);
 void dsi_runtime_put(struct platform_device *dsidev);
 
 void dsi_dump_clocks(struct seq_file *s);
-void dsi_create_debugfs_files_irq(struct dentry *debugfs_dir,
-		const struct file_operations *debug_fops);
-void dsi_create_debugfs_files_reg(struct dentry *debugfs_dir,
-		const struct file_operations *debug_fops);
 
 int dsi_init_display(struct omap_dss_device *display);
 void dsi_irq_handler(void);
@@ -371,8 +367,6 @@ int dpi_init_display(struct omap_dss_device *dssdev);
 int dispc_init_platform_driver(void);
 void dispc_uninit_platform_driver(void);
 void dispc_dump_clocks(struct seq_file *s);
-void dispc_dump_irqs(struct seq_file *s);
-void dispc_dump_regs(struct seq_file *s);
 void dispc_irq_handler(void);
 
 int dispc_runtime_get(void);
@@ -438,7 +432,6 @@ void dispc_mgr_setup(enum omap_channel channel,
 #ifdef CONFIG_OMAP2_DSS_VENC
 int venc_init_platform_driver(void);
 void venc_uninit_platform_driver(void);
-void venc_dump_regs(struct seq_file *s);
 int venc_init_display(struct omap_dss_device *display);
 unsigned long venc_get_pixel_clock(void);
 #else
@@ -455,7 +448,6 @@ int hdmi_init_platform_driver(void);
 void hdmi_uninit_platform_driver(void);
 int hdmi_init_display(struct omap_dss_device *dssdev);
 unsigned long hdmi_get_pixel_clock(void);
-void hdmi_dump_regs(struct seq_file *s);
 #else
 static inline int hdmi_init_display(struct omap_dss_device *dssdev)
 {
@@ -480,7 +472,6 @@ void hdmi_panel_exit(void);
 /* RFBI */
 int rfbi_init_platform_driver(void);
 void rfbi_uninit_platform_driver(void);
-void rfbi_dump_regs(struct seq_file *s);
 int rfbi_init_display(struct omap_dss_device *display);
 
 
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 45e98419d952..e0ab10808a78 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -420,7 +420,7 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
 	}
 }
 
-void hdmi_dump_regs(struct seq_file *s)
+static void hdmi_dump_regs(struct seq_file *s)
 {
 	mutex_lock(&hdmi.lock);
 
@@ -810,6 +810,8 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev)
 
 	hdmi_panel_init();
 
+	dss_debugfs_create_file("hdmi", hdmi_dump_regs);
+
 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index c5e69068489d..6adbea97332e 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -819,7 +819,7 @@ int omap_rfbi_update(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omap_rfbi_update);
 
-void rfbi_dump_regs(struct seq_file *s)
+static void rfbi_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
 
@@ -976,6 +976,8 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
 
 	rfbi_runtime_put();
 
+	dss_debugfs_create_file("rfbi", rfbi_dump_regs);
+
 	return 0;
 
 err_runtime_get:
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 90b57c5317bf..ebb6ec60e9a8 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -745,7 +745,7 @@ int venc_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-void venc_dump_regs(struct seq_file *s)
+static void venc_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r))
 
@@ -874,6 +874,8 @@ static int omap_venchw_probe(struct platform_device *pdev)
 	if (r)
 		goto err_reg_panel_driver;
 
+	dss_debugfs_create_file("venc", venc_dump_regs);
+
 	return 0;
 
 err_reg_panel_driver:
-- 
cgit v1.2.3


From 61055d4b2eb164cb81af1e5940a31c7f2e53757e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 7 Mar 2012 12:53:38 +0200
Subject: OMAPDSS: use platform_driver_probe for dsi/hdmi/rfbi/venc/dpi/sdi

Now that the core.c doesn't fail if output driver's init fails, we can
change the uses of platform_driver_register to platform_driver_probe.
This will allow us to use __init in the following patches.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dpi.c  | 3 +--
 drivers/video/omap2/dss/dsi.c  | 3 +--
 drivers/video/omap2/dss/hdmi.c | 3 +--
 drivers/video/omap2/dss/rfbi.c | 3 +--
 drivers/video/omap2/dss/sdi.c  | 3 +--
 drivers/video/omap2/dss/venc.c | 3 +--
 6 files changed, 6 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 0bb2c48db817..9316fd138be1 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -376,7 +376,6 @@ static int omap_dpi_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver omap_dpi_driver = {
-	.probe		= omap_dpi_probe,
 	.remove         = omap_dpi_remove,
 	.driver         = {
 		.name   = "omapdss_dpi",
@@ -386,7 +385,7 @@ static struct platform_driver omap_dpi_driver = {
 
 int dpi_init_platform_driver(void)
 {
-	return platform_driver_register(&omap_dpi_driver);
+	return platform_driver_probe(&omap_dpi_driver, omap_dpi_probe);
 }
 
 void dpi_uninit_platform_driver(void)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d5d80f92ce35..ce9a78acbcbb 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4768,7 +4768,6 @@ static const struct dev_pm_ops dsi_pm_ops = {
 };
 
 static struct platform_driver omap_dsihw_driver = {
-	.probe          = omap_dsihw_probe,
 	.remove         = omap_dsihw_remove,
 	.driver         = {
 		.name   = "omapdss_dsi",
@@ -4779,7 +4778,7 @@ static struct platform_driver omap_dsihw_driver = {
 
 int dsi_init_platform_driver(void)
 {
-	return platform_driver_register(&omap_dsihw_driver);
+	return platform_driver_probe(&omap_dsihw_driver, omap_dsihw_probe);
 }
 
 void dsi_uninit_platform_driver(void)
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index e0ab10808a78..d955491ed3cd 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -872,7 +872,6 @@ static const struct dev_pm_ops hdmi_pm_ops = {
 };
 
 static struct platform_driver omapdss_hdmihw_driver = {
-	.probe          = omapdss_hdmihw_probe,
 	.remove         = omapdss_hdmihw_remove,
 	.driver         = {
 		.name   = "omapdss_hdmi",
@@ -883,7 +882,7 @@ static struct platform_driver omapdss_hdmihw_driver = {
 
 int hdmi_init_platform_driver(void)
 {
-	return platform_driver_register(&omapdss_hdmihw_driver);
+	return platform_driver_probe(&omapdss_hdmihw_driver, omapdss_hdmihw_probe);
 }
 
 void hdmi_uninit_platform_driver(void)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 6adbea97332e..f18d726b6126 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -1015,7 +1015,6 @@ static const struct dev_pm_ops rfbi_pm_ops = {
 };
 
 static struct platform_driver omap_rfbihw_driver = {
-	.probe          = omap_rfbihw_probe,
 	.remove         = omap_rfbihw_remove,
 	.driver         = {
 		.name   = "omapdss_rfbi",
@@ -1026,7 +1025,7 @@ static struct platform_driver omap_rfbihw_driver = {
 
 int rfbi_init_platform_driver(void)
 {
-	return platform_driver_register(&omap_rfbihw_driver);
+	return platform_driver_probe(&omap_rfbihw_driver, omap_rfbihw_probe);
 }
 
 void rfbi_uninit_platform_driver(void)
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 9e3ee87ffc9c..b154d28b1614 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -187,7 +187,6 @@ static int omap_sdi_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver omap_sdi_driver = {
-	.probe		= omap_sdi_probe,
 	.remove         = omap_sdi_remove,
 	.driver         = {
 		.name   = "omapdss_sdi",
@@ -197,7 +196,7 @@ static struct platform_driver omap_sdi_driver = {
 
 int sdi_init_platform_driver(void)
 {
-	return platform_driver_register(&omap_sdi_driver);
+	return platform_driver_probe(&omap_sdi_driver, omap_sdi_probe);
 }
 
 void sdi_uninit_platform_driver(void)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index ebb6ec60e9a8..1756b4fa7c67 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -929,7 +929,6 @@ static const struct dev_pm_ops venc_pm_ops = {
 };
 
 static struct platform_driver omap_venchw_driver = {
-	.probe          = omap_venchw_probe,
 	.remove         = omap_venchw_remove,
 	.driver         = {
 		.name   = "omapdss_venc",
@@ -943,7 +942,7 @@ int venc_init_platform_driver(void)
 	if (cpu_is_omap44xx())
 		return 0;
 
-	return platform_driver_register(&omap_venchw_driver);
+	return platform_driver_probe(&omap_venchw_driver, omap_venchw_probe);
 }
 
 void venc_uninit_platform_driver(void)
-- 
cgit v1.2.3


From 6e7e8f06b2c77dbb5d28062a174e4d67aec4b924 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 17 Feb 2012 17:41:13 +0200
Subject: OMAPDSS: add __init & __exit

Now that we are using platform_driver_probe() we can add __inits and
__exits all around.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c  |  4 ++--
 drivers/video/omap2/dss/dispc.c | 10 +++++-----
 drivers/video/omap2/dss/dpi.c   | 10 +++++-----
 drivers/video/omap2/dss/dsi.c   | 10 +++++-----
 drivers/video/omap2/dss/dss.c   |  8 ++++----
 drivers/video/omap2/dss/dss.h   | 30 +++++++++++++++---------------
 drivers/video/omap2/dss/hdmi.c  | 10 +++++-----
 drivers/video/omap2/dss/rfbi.c  | 10 +++++-----
 drivers/video/omap2/dss/sdi.c   | 10 +++++-----
 drivers/video/omap2/dss/venc.c  | 10 +++++-----
 10 files changed, 56 insertions(+), 56 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index c54bba04cb00..9b84f134357e 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -203,7 +203,7 @@ static inline int dss_debugfs_create_file(const char *name,
 #endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
 
 /* PLATFORM DEVICE */
-static int omap_dss_probe(struct platform_device *pdev)
+static int __init omap_dss_probe(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	int r;
@@ -483,7 +483,7 @@ static void omap_dss_unregister_device(struct omap_dss_device *dssdev)
 }
 
 /* BUS */
-static int omap_dss_bus_register(void)
+static int __init omap_dss_bus_register(void)
 {
 	int r;
 
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 534f931229cd..b509ca661e35 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3482,7 +3482,7 @@ static void _omap_dispc_initial_config(void)
 }
 
 /* DISPC HW IP initialisation */
-static int omap_dispchw_probe(struct platform_device *pdev)
+static int __init omap_dispchw_probe(struct platform_device *pdev)
 {
 	u32 rev;
 	int r = 0;
@@ -3564,7 +3564,7 @@ err_runtime_get:
 	return r;
 }
 
-static int omap_dispchw_remove(struct platform_device *pdev)
+static int __exit omap_dispchw_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);
 
@@ -3593,7 +3593,7 @@ static const struct dev_pm_ops dispc_pm_ops = {
 };
 
 static struct platform_driver omap_dispchw_driver = {
-	.remove         = omap_dispchw_remove,
+	.remove         = __exit_p(omap_dispchw_remove),
 	.driver         = {
 		.name   = "omapdss_dispc",
 		.owner  = THIS_MODULE,
@@ -3601,12 +3601,12 @@ static struct platform_driver omap_dispchw_driver = {
 	},
 };
 
-int dispc_init_platform_driver(void)
+int __init dispc_init_platform_driver(void)
 {
 	return platform_driver_probe(&omap_dispchw_driver, omap_dispchw_probe);
 }
 
-void dispc_uninit_platform_driver(void)
+void __exit dispc_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_dispchw_driver);
 }
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 9316fd138be1..6061379559c3 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -365,30 +365,30 @@ int dpi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int omap_dpi_probe(struct platform_device *pdev)
+static int __init omap_dpi_probe(struct platform_device *pdev)
 {
 	return 0;
 }
 
-static int omap_dpi_remove(struct platform_device *pdev)
+static int __exit omap_dpi_remove(struct platform_device *pdev)
 {
 	return 0;
 }
 
 static struct platform_driver omap_dpi_driver = {
-	.remove         = omap_dpi_remove,
+	.remove         = __exit_p(omap_dpi_remove),
 	.driver         = {
 		.name   = "omapdss_dpi",
 		.owner  = THIS_MODULE,
 	},
 };
 
-int dpi_init_platform_driver(void)
+int __init dpi_init_platform_driver(void)
 {
 	return platform_driver_probe(&omap_dpi_driver, omap_dpi_probe);
 }
 
-void dpi_uninit_platform_driver(void)
+void __exit dpi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_dpi_driver);
 }
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index ce9a78acbcbb..ddea71ea2a0f 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4608,7 +4608,7 @@ static void dsi_put_clocks(struct platform_device *dsidev)
 }
 
 /* DSI1 HW IP initialisation */
-static int omap_dsihw_probe(struct platform_device *dsidev)
+static int __init omap_dsihw_probe(struct platform_device *dsidev)
 {
 	u32 rev;
 	int r, i, dsi_module = dsi_get_dsidev_id(dsidev);
@@ -4721,7 +4721,7 @@ err_runtime_get:
 	return r;
 }
 
-static int omap_dsihw_remove(struct platform_device *dsidev)
+static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
@@ -4768,7 +4768,7 @@ static const struct dev_pm_ops dsi_pm_ops = {
 };
 
 static struct platform_driver omap_dsihw_driver = {
-	.remove         = omap_dsihw_remove,
+	.remove         = __exit_p(omap_dsihw_remove),
 	.driver         = {
 		.name   = "omapdss_dsi",
 		.owner  = THIS_MODULE,
@@ -4776,12 +4776,12 @@ static struct platform_driver omap_dsihw_driver = {
 	},
 };
 
-int dsi_init_platform_driver(void)
+int __init dsi_init_platform_driver(void)
 {
 	return platform_driver_probe(&omap_dsihw_driver, omap_dsihw_probe);
 }
 
-void dsi_uninit_platform_driver(void)
+void __exit dsi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_dsihw_driver);
 }
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 08bee78191d6..2183f840a7ac 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -744,7 +744,7 @@ void dss_debug_dump_clocks(struct seq_file *s)
 #endif
 
 /* DSS HW IP initialisation */
-static int omap_dsshw_probe(struct platform_device *pdev)
+static int __init omap_dsshw_probe(struct platform_device *pdev)
 {
 	struct resource *dss_mem;
 	u32 rev;
@@ -805,7 +805,7 @@ err_runtime_get:
 	return r;
 }
 
-static int omap_dsshw_remove(struct platform_device *pdev)
+static int __exit omap_dsshw_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);
 
@@ -845,7 +845,7 @@ static const struct dev_pm_ops dss_pm_ops = {
 };
 
 static struct platform_driver omap_dsshw_driver = {
-	.remove         = omap_dsshw_remove,
+	.remove         = __exit_p(omap_dsshw_remove),
 	.driver         = {
 		.name   = "omapdss_dss",
 		.owner  = THIS_MODULE,
@@ -853,7 +853,7 @@ static struct platform_driver omap_dsshw_driver = {
 	},
 };
 
-int dss_init_platform_driver(void)
+int __init dss_init_platform_driver(void)
 {
 	return platform_driver_probe(&omap_dsshw_driver, omap_dsshw_probe);
 }
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 5faddf06aa0b..7bc24ed8de8e 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -231,7 +231,7 @@ int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
 		const struct omap_video_timings *mgr_timings);
 
 /* DSS */
-int dss_init_platform_driver(void);
+int dss_init_platform_driver(void) __init;
 void dss_uninit_platform_driver(void);
 
 void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
@@ -268,8 +268,8 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
 		struct dispc_clock_info *dispc_cinfo);
 
 /* SDI */
-int sdi_init_platform_driver(void);
-void sdi_uninit_platform_driver(void);
+int sdi_init_platform_driver(void) __init;
+void sdi_uninit_platform_driver(void) __exit;
 int sdi_init_display(struct omap_dss_device *display);
 
 /* DSI */
@@ -278,8 +278,8 @@ int sdi_init_display(struct omap_dss_device *display);
 struct dentry;
 struct file_operations;
 
-int dsi_init_platform_driver(void);
-void dsi_uninit_platform_driver(void);
+int dsi_init_platform_driver(void) __init;
+void dsi_uninit_platform_driver(void) __exit;
 
 int dsi_runtime_get(struct platform_device *dsidev);
 void dsi_runtime_put(struct platform_device *dsidev);
@@ -359,13 +359,13 @@ static inline struct platform_device *dsi_get_dsidev_from_id(int module)
 #endif
 
 /* DPI */
-int dpi_init_platform_driver(void);
-void dpi_uninit_platform_driver(void);
+int dpi_init_platform_driver(void) __init;
+void dpi_uninit_platform_driver(void) __exit;
 int dpi_init_display(struct omap_dss_device *dssdev);
 
 /* DISPC */
-int dispc_init_platform_driver(void);
-void dispc_uninit_platform_driver(void);
+int dispc_init_platform_driver(void) __init;
+void dispc_uninit_platform_driver(void) __exit;
 void dispc_dump_clocks(struct seq_file *s);
 void dispc_irq_handler(void);
 
@@ -430,8 +430,8 @@ void dispc_mgr_setup(enum omap_channel channel,
 
 /* VENC */
 #ifdef CONFIG_OMAP2_DSS_VENC
-int venc_init_platform_driver(void);
-void venc_uninit_platform_driver(void);
+int venc_init_platform_driver(void) __init;
+void venc_uninit_platform_driver(void) __exit;
 int venc_init_display(struct omap_dss_device *display);
 unsigned long venc_get_pixel_clock(void);
 #else
@@ -444,8 +444,8 @@ static inline unsigned long venc_get_pixel_clock(void)
 
 /* HDMI */
 #ifdef CONFIG_OMAP4_DSS_HDMI
-int hdmi_init_platform_driver(void);
-void hdmi_uninit_platform_driver(void);
+int hdmi_init_platform_driver(void) __init;
+void hdmi_uninit_platform_driver(void) __exit;
 int hdmi_init_display(struct omap_dss_device *dssdev);
 unsigned long hdmi_get_pixel_clock(void);
 #else
@@ -470,8 +470,8 @@ int hdmi_panel_init(void);
 void hdmi_panel_exit(void);
 
 /* RFBI */
-int rfbi_init_platform_driver(void);
-void rfbi_uninit_platform_driver(void);
+int rfbi_init_platform_driver(void) __init;
+void rfbi_uninit_platform_driver(void) __exit;
 int rfbi_init_display(struct omap_dss_device *display);
 
 
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index d955491ed3cd..09ede7fa1983 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -772,7 +772,7 @@ static void hdmi_put_clocks(void)
 }
 
 /* HDMI HW IP initialisation */
-static int omapdss_hdmihw_probe(struct platform_device *pdev)
+static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 {
 	struct resource *hdmi_mem;
 	int r;
@@ -826,7 +826,7 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int omapdss_hdmihw_remove(struct platform_device *pdev)
+static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
 {
 	hdmi_panel_exit();
 
@@ -872,7 +872,7 @@ static const struct dev_pm_ops hdmi_pm_ops = {
 };
 
 static struct platform_driver omapdss_hdmihw_driver = {
-	.remove         = omapdss_hdmihw_remove,
+	.remove         = __exit_p(omapdss_hdmihw_remove),
 	.driver         = {
 		.name   = "omapdss_hdmi",
 		.owner  = THIS_MODULE,
@@ -880,12 +880,12 @@ static struct platform_driver omapdss_hdmihw_driver = {
 	},
 };
 
-int hdmi_init_platform_driver(void)
+int __init hdmi_init_platform_driver(void)
 {
 	return platform_driver_probe(&omapdss_hdmihw_driver, omapdss_hdmihw_probe);
 }
 
-void hdmi_uninit_platform_driver(void)
+void __exit hdmi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omapdss_hdmihw_driver);
 }
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index f18d726b6126..58da146254ee 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -928,7 +928,7 @@ int rfbi_init_display(struct omap_dss_device *dssdev)
 }
 
 /* RFBI HW IP initialisation */
-static int omap_rfbihw_probe(struct platform_device *pdev)
+static int __init omap_rfbihw_probe(struct platform_device *pdev)
 {
 	u32 rev;
 	struct resource *rfbi_mem;
@@ -985,7 +985,7 @@ err_runtime_get:
 	return r;
 }
 
-static int omap_rfbihw_remove(struct platform_device *pdev)
+static int __exit omap_rfbihw_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);
 	return 0;
@@ -1015,7 +1015,7 @@ static const struct dev_pm_ops rfbi_pm_ops = {
 };
 
 static struct platform_driver omap_rfbihw_driver = {
-	.remove         = omap_rfbihw_remove,
+	.remove         = __exit_p(omap_rfbihw_remove),
 	.driver         = {
 		.name   = "omapdss_rfbi",
 		.owner  = THIS_MODULE,
@@ -1023,12 +1023,12 @@ static struct platform_driver omap_rfbihw_driver = {
 	},
 };
 
-int rfbi_init_platform_driver(void)
+int __init rfbi_init_platform_driver(void)
 {
 	return platform_driver_probe(&omap_rfbihw_driver, omap_rfbihw_probe);
 }
 
-void rfbi_uninit_platform_driver(void)
+void __exit rfbi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_rfbihw_driver);
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index b154d28b1614..661b594225a2 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -176,30 +176,30 @@ int sdi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int omap_sdi_probe(struct platform_device *pdev)
+static int __init omap_sdi_probe(struct platform_device *pdev)
 {
 	return 0;
 }
 
-static int omap_sdi_remove(struct platform_device *pdev)
+static int __exit omap_sdi_remove(struct platform_device *pdev)
 {
 	return 0;
 }
 
 static struct platform_driver omap_sdi_driver = {
-	.remove         = omap_sdi_remove,
+	.remove         = __exit_p(omap_sdi_remove),
 	.driver         = {
 		.name   = "omapdss_sdi",
 		.owner  = THIS_MODULE,
 	},
 };
 
-int sdi_init_platform_driver(void)
+int __init sdi_init_platform_driver(void)
 {
 	return platform_driver_probe(&omap_sdi_driver, omap_sdi_probe);
 }
 
-void sdi_uninit_platform_driver(void)
+void __exit sdi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_sdi_driver);
 }
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 1756b4fa7c67..7322ac8a3bcc 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -830,7 +830,7 @@ static void venc_put_clocks(void)
 }
 
 /* VENC HW IP initialisation */
-static int omap_venchw_probe(struct platform_device *pdev)
+static int __init omap_venchw_probe(struct platform_device *pdev)
 {
 	u8 rev_id;
 	struct resource *venc_mem;
@@ -885,7 +885,7 @@ err_runtime_get:
 	return r;
 }
 
-static int omap_venchw_remove(struct platform_device *pdev)
+static int __exit omap_venchw_remove(struct platform_device *pdev)
 {
 	if (venc.vdda_dac_reg != NULL) {
 		regulator_put(venc.vdda_dac_reg);
@@ -929,7 +929,7 @@ static const struct dev_pm_ops venc_pm_ops = {
 };
 
 static struct platform_driver omap_venchw_driver = {
-	.remove         = omap_venchw_remove,
+	.remove         = __exit_p(omap_venchw_remove),
 	.driver         = {
 		.name   = "omapdss_venc",
 		.owner  = THIS_MODULE,
@@ -937,7 +937,7 @@ static struct platform_driver omap_venchw_driver = {
 	},
 };
 
-int venc_init_platform_driver(void)
+int __init venc_init_platform_driver(void)
 {
 	if (cpu_is_omap44xx())
 		return 0;
@@ -945,7 +945,7 @@ int venc_init_platform_driver(void)
 	return platform_driver_probe(&omap_venchw_driver, omap_venchw_probe);
 }
 
-void venc_uninit_platform_driver(void)
+void __exit venc_uninit_platform_driver(void)
 {
 	if (cpu_is_omap44xx())
 		return;
-- 
cgit v1.2.3


From d64f14e191310570264454998201a84d211f30aa Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 17 Feb 2012 17:43:03 +0200
Subject: OMAPFB: add __init & __exit

Change omapfb to use platform_driver_probe and add __init & __exit.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 7f02e7f90d63..165a4be95025 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -2307,7 +2307,7 @@ static int omapfb_init_display(struct omapfb2_device *fbdev,
 	return 0;
 }
 
-static int omapfb_probe(struct platform_device *pdev)
+static int __init omapfb_probe(struct platform_device *pdev)
 {
 	struct omapfb2_device *fbdev = NULL;
 	int r = 0;
@@ -2448,7 +2448,7 @@ err0:
 	return r;
 }
 
-static int omapfb_remove(struct platform_device *pdev)
+static int __exit omapfb_remove(struct platform_device *pdev)
 {
 	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
 
@@ -2462,8 +2462,7 @@ static int omapfb_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver omapfb_driver = {
-	.probe          = omapfb_probe,
-	.remove         = omapfb_remove,
+	.remove         = __exit_p(omapfb_remove),
 	.driver         = {
 		.name   = "omapfb",
 		.owner  = THIS_MODULE,
@@ -2474,7 +2473,7 @@ static int __init omapfb_init(void)
 {
 	DBG("omapfb_init\n");
 
-	if (platform_driver_register(&omapfb_driver)) {
+	if (platform_driver_probe(&omapfb_driver, omapfb_probe)) {
 		printk(KERN_ERR "failed to register omapfb driver\n");
 		return -ENODEV;
 	}
-- 
cgit v1.2.3


From c018c6738bdae8c9f49766fd3d8b3770be2572f9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 23 Feb 2012 13:00:51 +0200
Subject: OMAPDSS: change default_device handling

We currently have a two ways to set a "default panel device" for dss, to
which the overlays are connected when the omapdss driver is loaded:

- in textual format (name of the display) as cmdline parameter
- as a pointer to the panel device from board file via pdata

The current code handles this in a bit too complex way by using both of
the above methods during runtime. However, with DT we don't have pdata
anymore, so the code handling the second case won't work anymore. The
current code has also the problem that it modifies the platform_data.

This patch simplifies the code a bit by using the pointer method only
inside the probe function, and stores the name of the panel device. This
way we only need to handle the textual format during operation and also
avoid modifying the platform_data.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 9b84f134357e..c3566a05d168 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -43,6 +43,8 @@ static struct {
 
 	struct regulator *vdds_dsi_reg;
 	struct regulator *vdds_sdi_reg;
+
+	const char *default_display_name;
 } core;
 
 static char *def_disp_name;
@@ -222,6 +224,11 @@ static int __init omap_dss_probe(struct platform_device *pdev)
 	if (r)
 		goto err_debugfs;
 
+	if (def_disp_name)
+		core.default_display_name = def_disp_name;
+	else if (pdata->default_device)
+		core.default_display_name = pdata->default_device->name;
+
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
 
@@ -235,9 +242,6 @@ static int __init omap_dss_probe(struct platform_device *pdev)
 
 			goto err_register;
 		}
-
-		if (def_disp_name && strcmp(def_disp_name, dssdev->name) == 0)
-			pdata->default_device = dssdev;
 	}
 
 	return 0;
@@ -360,7 +364,6 @@ static int dss_driver_probe(struct device *dev)
 	int r;
 	struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
 	struct omap_dss_device *dssdev = to_dss_device(dev);
-	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
 	bool force;
 
 	DSSDBG("driver_probe: dev %s/%s, drv %s\n",
@@ -369,7 +372,8 @@ static int dss_driver_probe(struct device *dev)
 
 	dss_init_device(core.pdev, dssdev);
 
-	force = pdata->default_device == dssdev;
+	force = core.default_display_name &&
+		strcmp(core.default_display_name, dssdev->name) == 0;
 	dss_recheck_connections(dssdev, force);
 
 	r = dssdrv->probe(dssdev);
-- 
cgit v1.2.3


From 35deca3de6190b6bc03e34ed45de079047f834ab Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 1 Mar 2012 15:45:53 +0200
Subject: OMAPDSS: interface drivers register their panel devices

Currently the higher level omapdss platform driver gets the list of
displays in its platform data, and uses that list to create the
omap_dss_device for each display.

With DT, the logical way to do the above is to list the displays under
each individual output, i.e. we'd have "dpi" node, under which we would
have the display that uses DPI. In other words, each output driver
handles the displays that use that particular output.

To make the current code ready for DT, this patch modifies the output
drivers so that each of them creates the display devices which use that
output. However, instead of changing the platform data to suit this
method, each output driver is passed the full list of displays, and the
drivers pick the displays that are meant for them. This allows us to
keep the old platform data, and thus we avoid the need to change the
board files.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c | 50 ++++++++++++++----------------------------
 drivers/video/omap2/dss/dpi.c  | 17 ++++++++++++++
 drivers/video/omap2/dss/dsi.c  | 18 +++++++++++++++
 drivers/video/omap2/dss/dss.h  |  5 +++++
 drivers/video/omap2/dss/hdmi.c | 17 +++++++++++++-
 drivers/video/omap2/dss/rfbi.c | 16 +++++++++++++-
 drivers/video/omap2/dss/sdi.c  | 17 ++++++++++++++
 drivers/video/omap2/dss/venc.c | 18 ++++++++++++++-
 8 files changed, 122 insertions(+), 36 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index c3566a05d168..72ded9cd2cb0 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -56,9 +56,6 @@ bool dss_debug;
 module_param_named(debug, dss_debug, bool, 0644);
 #endif
 
-static int omap_dss_register_device(struct omap_dss_device *);
-static void omap_dss_unregister_device(struct omap_dss_device *);
-
 /* REGULATORS */
 
 struct regulator *dss_get_vdds_dsi(void)
@@ -209,7 +206,6 @@ static int __init omap_dss_probe(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	int r;
-	int i;
 
 	core.pdev = pdev;
 
@@ -229,25 +225,8 @@ static int __init omap_dss_probe(struct platform_device *pdev)
 	else if (pdata->default_device)
 		core.default_display_name = pdata->default_device->name;
 
-	for (i = 0; i < pdata->num_devices; ++i) {
-		struct omap_dss_device *dssdev = pdata->devices[i];
-
-		r = omap_dss_register_device(dssdev);
-		if (r) {
-			DSSERR("device %d %s register failed %d\n", i,
-				dssdev->name ?: "unnamed", r);
-
-			while (--i >= 0)
-				omap_dss_unregister_device(pdata->devices[i]);
-
-			goto err_register;
-		}
-	}
-
 	return 0;
 
-err_register:
-	dss_uninitialize_debugfs();
 err_debugfs:
 
 	return r;
@@ -255,17 +234,11 @@ err_debugfs:
 
 static int omap_dss_remove(struct platform_device *pdev)
 {
-	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
-	int i;
-
 	dss_uninitialize_debugfs();
 
 	dss_uninit_overlays(pdev);
 	dss_uninit_overlay_managers(pdev);
 
-	for (i = 0; i < pdata->num_devices; ++i)
-		omap_dss_unregister_device(pdata->devices[i]);
-
 	return 0;
 }
 
@@ -467,25 +440,36 @@ static void omap_dss_dev_release(struct device *dev)
 	reset_device(dev, 0);
 }
 
-static int omap_dss_register_device(struct omap_dss_device *dssdev)
+int omap_dss_register_device(struct omap_dss_device *dssdev,
+		struct device *parent, int disp_num)
 {
-	static int dev_num;
-
 	WARN_ON(!dssdev->driver_name);
 
 	reset_device(&dssdev->dev, 1);
 	dssdev->dev.bus = &dss_bus_type;
-	dssdev->dev.parent = &dss_bus;
+	dssdev->dev.parent = parent;
 	dssdev->dev.release = omap_dss_dev_release;
-	dev_set_name(&dssdev->dev, "display%d", dev_num++);
+	dev_set_name(&dssdev->dev, "display%d", disp_num);
 	return device_register(&dssdev->dev);
 }
 
-static void omap_dss_unregister_device(struct omap_dss_device *dssdev)
+void omap_dss_unregister_device(struct omap_dss_device *dssdev)
 {
 	device_unregister(&dssdev->dev);
 }
 
+static int dss_unregister_dss_dev(struct device *dev, void *data)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	omap_dss_unregister_device(dssdev);
+	return 0;
+}
+
+void omap_dss_unregister_child_devices(struct device *parent)
+{
+	device_for_each_child(parent, NULL, dss_unregister_dss_dev);
+}
+
 /* BUS */
 static int __init omap_dss_bus_register(void)
 {
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 6061379559c3..35eb29706934 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -367,11 +367,28 @@ int dpi_init_display(struct omap_dss_device *dssdev)
 
 static int __init omap_dpi_probe(struct platform_device *pdev)
 {
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	int i, r;
+
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_DPI)
+			continue;
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+					dssdev->name, r);
+	}
+
 	return 0;
 }
 
 static int __exit omap_dpi_remove(struct platform_device *pdev)
 {
+	omap_dss_unregister_child_devices(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index ddea71ea2a0f..78b962308a02 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4614,6 +4614,7 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 	int r, i, dsi_module = dsi_get_dsidev_id(dsidev);
 	struct resource *dsi_mem;
 	struct dsi_data *dsi;
+	struct omap_dss_board_info *pdata = dsidev->dev.platform_data;
 
 	dsi = devm_kzalloc(&dsidev->dev, sizeof(*dsi), GFP_KERNEL);
 	if (!dsi)
@@ -4700,6 +4701,21 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 	else
 		dsi->num_lanes_supported = 3;
 
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_DSI)
+			continue;
+
+		if (dssdev->phy.dsi.module != dsi_module)
+			continue;
+
+		r = omap_dss_register_device(dssdev, &dsidev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+				dssdev->name, r);
+	}
+
 	dsi_runtime_put(dsidev);
 
 	if (dsi_module == 0)
@@ -4727,6 +4743,8 @@ static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 
 	WARN_ON(dsi->scp_clk_refcount > 0);
 
+	omap_dss_unregister_child_devices(&dsidev->dev);
+
 	pm_runtime_disable(&dsidev->dev);
 
 	dsi_put_clocks(dsidev);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 7bc24ed8de8e..972b22d27972 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -165,6 +165,11 @@ void dss_dsi_disable_pads(int dsi_id, unsigned lane_mask);
 int dss_set_min_bus_tput(struct device *dev, unsigned long tput);
 int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *));
 
+int omap_dss_register_device(struct omap_dss_device *dssdev,
+		struct device *parent, int disp_num);
+void omap_dss_unregister_device(struct omap_dss_device *dssdev);
+void omap_dss_unregister_child_devices(struct device *parent);
+
 /* apply */
 void dss_apply_init(void);
 int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 09ede7fa1983..faa91441a6b0 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -774,8 +774,9 @@ static void hdmi_put_clocks(void)
 /* HDMI HW IP initialisation */
 static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 {
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	struct resource *hdmi_mem;
-	int r;
+	int r, i;
 
 	hdmi.pdev = pdev;
 
@@ -812,6 +813,18 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("hdmi", hdmi_dump_regs);
 
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
+			continue;
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+					dssdev->name, r);
+	}
+
 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
 
@@ -828,6 +841,8 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 
 static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
 {
+	omap_dss_unregister_child_devices(&pdev->dev);
+
 	hdmi_panel_exit();
 
 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 58da146254ee..4c0a6c97d62b 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -930,10 +930,11 @@ int rfbi_init_display(struct omap_dss_device *dssdev)
 /* RFBI HW IP initialisation */
 static int __init omap_rfbihw_probe(struct platform_device *pdev)
 {
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	u32 rev;
 	struct resource *rfbi_mem;
 	struct clk *clk;
-	int r;
+	int r, i;
 
 	rfbi.pdev = pdev;
 
@@ -978,6 +979,18 @@ static int __init omap_rfbihw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("rfbi", rfbi_dump_regs);
 
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_DBI)
+			continue;
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+				dssdev->name, r);
+	}
+
 	return 0;
 
 err_runtime_get:
@@ -987,6 +1000,7 @@ err_runtime_get:
 
 static int __exit omap_rfbihw_remove(struct platform_device *pdev)
 {
+	omap_dss_unregister_child_devices(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 661b594225a2..3be8134ec2d9 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -178,11 +178,28 @@ int sdi_init_display(struct omap_dss_device *dssdev)
 
 static int __init omap_sdi_probe(struct platform_device *pdev)
 {
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	int i, r;
+
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_SDI)
+			continue;
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+					dssdev->name, r);
+	}
+
 	return 0;
 }
 
 static int __exit omap_sdi_remove(struct platform_device *pdev)
 {
+	omap_dss_unregister_child_devices(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 7322ac8a3bcc..c194dfab6356 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -832,9 +832,10 @@ static void venc_put_clocks(void)
 /* VENC HW IP initialisation */
 static int __init omap_venchw_probe(struct platform_device *pdev)
 {
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	u8 rev_id;
 	struct resource *venc_mem;
-	int r;
+	int r, i;
 
 	venc.pdev = pdev;
 
@@ -876,6 +877,18 @@ static int __init omap_venchw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("venc", venc_dump_regs);
 
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_VENC)
+			continue;
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+					dssdev->name, r);
+	}
+
 	return 0;
 
 err_reg_panel_driver:
@@ -887,10 +900,13 @@ err_runtime_get:
 
 static int __exit omap_venchw_remove(struct platform_device *pdev)
 {
+	omap_dss_unregister_child_devices(&pdev->dev);
+
 	if (venc.vdda_dac_reg != NULL) {
 		regulator_put(venc.vdda_dac_reg);
 		venc.vdda_dac_reg = NULL;
 	}
+
 	omap_dss_unregister_driver(&venc_driver);
 
 	pm_runtime_disable(&pdev->dev);
-- 
cgit v1.2.3


From 9d8232a77fd55e00f0c519518c0ac5bbff1e477c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 1 Mar 2012 16:58:39 +0200
Subject: OMAPDSS: init omap_dss_devices internally

Now that each output driver creates their own display devices, the
output drivers can also initialize those devices.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/display.c | 40 ---------------------------------------
 drivers/video/omap2/dss/dpi.c     |  8 +++++++-
 drivers/video/omap2/dss/dsi.c     |  8 +++++++-
 drivers/video/omap2/dss/dss.h     | 10 ----------
 drivers/video/omap2/dss/hdmi.c    |  8 +++++++-
 drivers/video/omap2/dss/rfbi.c    |  8 +++++++-
 drivers/video/omap2/dss/sdi.c     |  8 +++++++-
 drivers/video/omap2/dss/venc.c    |  8 +++++++-
 8 files changed, 42 insertions(+), 56 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index e688d10f061a..faf7d91c4a84 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -359,46 +359,6 @@ void dss_init_device(struct platform_device *pdev,
 	int i;
 	int r;
 
-	switch (dssdev->type) {
-#ifdef CONFIG_OMAP2_DSS_DPI
-	case OMAP_DISPLAY_TYPE_DPI:
-		r = dpi_init_display(dssdev);
-		break;
-#endif
-#ifdef CONFIG_OMAP2_DSS_RFBI
-	case OMAP_DISPLAY_TYPE_DBI:
-		r = rfbi_init_display(dssdev);
-		break;
-#endif
-#ifdef CONFIG_OMAP2_DSS_VENC
-	case OMAP_DISPLAY_TYPE_VENC:
-		r = venc_init_display(dssdev);
-		break;
-#endif
-#ifdef CONFIG_OMAP2_DSS_SDI
-	case OMAP_DISPLAY_TYPE_SDI:
-		r = sdi_init_display(dssdev);
-		break;
-#endif
-#ifdef CONFIG_OMAP2_DSS_DSI
-	case OMAP_DISPLAY_TYPE_DSI:
-		r = dsi_init_display(dssdev);
-		break;
-#endif
-	case OMAP_DISPLAY_TYPE_HDMI:
-		r = hdmi_init_display(dssdev);
-		break;
-	default:
-		DSSERR("Support for display '%s' not compiled in.\n",
-				dssdev->name);
-		return;
-	}
-
-	if (r) {
-		DSSERR("failed to init display %s\n", dssdev->name);
-		return;
-	}
-
 	/* create device sysfs files */
 	i = 0;
 	while ((attr = display_sysfs_attrs[i++]) != NULL) {
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 35eb29706934..de3454b91497 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -339,7 +339,7 @@ int dpi_check_timings(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(dpi_check_timings);
 
-int dpi_init_display(struct omap_dss_device *dssdev)
+static int __init dpi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
 
@@ -376,6 +376,12 @@ static int __init omap_dpi_probe(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_DPI)
 			continue;
 
+		r = dpi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
 		r = omap_dss_register_device(dssdev, &pdev->dev, i);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 78b962308a02..8cc0b2d53c6f 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4454,7 +4454,7 @@ int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 }
 EXPORT_SYMBOL(omapdss_dsi_enable_te);
 
-int dsi_init_display(struct omap_dss_device *dssdev)
+static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@@ -4710,6 +4710,12 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 		if (dssdev->phy.dsi.module != dsi_module)
 			continue;
 
+		r = dsi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
 		r = omap_dss_register_device(dssdev, &dsidev->dev, i);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 972b22d27972..d5cb19fe7e8b 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -275,7 +275,6 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
 /* SDI */
 int sdi_init_platform_driver(void) __init;
 void sdi_uninit_platform_driver(void) __exit;
-int sdi_init_display(struct omap_dss_device *display);
 
 /* DSI */
 #ifdef CONFIG_OMAP2_DSS_DSI
@@ -291,7 +290,6 @@ void dsi_runtime_put(struct platform_device *dsidev);
 
 void dsi_dump_clocks(struct seq_file *s);
 
-int dsi_init_display(struct omap_dss_device *display);
 void dsi_irq_handler(void);
 u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt);
 
@@ -366,7 +364,6 @@ static inline struct platform_device *dsi_get_dsidev_from_id(int module)
 /* DPI */
 int dpi_init_platform_driver(void) __init;
 void dpi_uninit_platform_driver(void) __exit;
-int dpi_init_display(struct omap_dss_device *dssdev);
 
 /* DISPC */
 int dispc_init_platform_driver(void) __init;
@@ -437,7 +434,6 @@ void dispc_mgr_setup(enum omap_channel channel,
 #ifdef CONFIG_OMAP2_DSS_VENC
 int venc_init_platform_driver(void) __init;
 void venc_uninit_platform_driver(void) __exit;
-int venc_init_display(struct omap_dss_device *display);
 unsigned long venc_get_pixel_clock(void);
 #else
 static inline unsigned long venc_get_pixel_clock(void)
@@ -451,13 +447,8 @@ static inline unsigned long venc_get_pixel_clock(void)
 #ifdef CONFIG_OMAP4_DSS_HDMI
 int hdmi_init_platform_driver(void) __init;
 void hdmi_uninit_platform_driver(void) __exit;
-int hdmi_init_display(struct omap_dss_device *dssdev);
 unsigned long hdmi_get_pixel_clock(void);
 #else
-static inline int hdmi_init_display(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
 static inline unsigned long hdmi_get_pixel_clock(void)
 {
 	WARN("%s: HDMI not compiled in, returning pclk as 0\n", __func__);
@@ -477,7 +468,6 @@ void hdmi_panel_exit(void);
 /* RFBI */
 int rfbi_init_platform_driver(void) __init;
 void rfbi_uninit_platform_driver(void) __exit;
-int rfbi_init_display(struct omap_dss_device *display);
 
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index faa91441a6b0..fa1a054bb03b 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -147,7 +147,7 @@ static void hdmi_runtime_put(void)
 	WARN_ON(r < 0);
 }
 
-int hdmi_init_display(struct omap_dss_device *dssdev)
+static int __init hdmi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
 
@@ -819,6 +819,12 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
 			continue;
 
+		r = hdmi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
 		r = omap_dss_register_device(dssdev, &pdev->dev, i);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 4c0a6c97d62b..f081f01b0b7d 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -920,7 +920,7 @@ void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
 }
 EXPORT_SYMBOL(omapdss_rfbi_display_disable);
 
-int rfbi_init_display(struct omap_dss_device *dssdev)
+static int __init rfbi_init_display(struct omap_dss_device *dssdev)
 {
 	rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
 	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
@@ -985,6 +985,12 @@ static int __init omap_rfbihw_probe(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_DBI)
 			continue;
 
+		r = rfbi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
 		r = omap_dss_register_device(dssdev, &pdev->dev, i);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 3be8134ec2d9..2641a768f316 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -156,7 +156,7 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 }
 EXPORT_SYMBOL(omapdss_sdi_display_disable);
 
-int sdi_init_display(struct omap_dss_device *dssdev)
+static int __init sdi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("SDI init\n");
 
@@ -187,6 +187,12 @@ static int __init omap_sdi_probe(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_SDI)
 			continue;
 
+		r = sdi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
 		r = omap_dss_register_device(dssdev, &pdev->dev, i);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index c194dfab6356..005fdaa2cf7d 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -725,7 +725,7 @@ static struct omap_dss_driver venc_driver = {
 };
 /* driver end */
 
-int venc_init_display(struct omap_dss_device *dssdev)
+static int __init venc_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
 
@@ -883,6 +883,12 @@ static int __init omap_venchw_probe(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_VENC)
 			continue;
 
+		r = venc_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
 		r = omap_dss_register_device(dssdev, &pdev->dev, i);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
-- 
cgit v1.2.3


From 11ee9606407031827d43ecde8e62a418ac3b4f83 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 9 Mar 2012 16:07:39 +0200
Subject: OMAPDSS: DSI: improve DSI module id handling

We currently use the id of the dsi platform device (dsidev->id) as the
DSI hardware module ID. This works because we assign the ID manually in
arch/arm/mach-omap2/display.c at boot time.

However, with device tree the platform device IDs are automatically
assigned to an arbitrary number, and we can't use it.

Instead of using dsidev->id during operation, this patch stores the
value of dsidev->id to a private field of the dsi driver at probe(). The
future device tree code can thus set the private field with some other
way.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 46 ++++++++++++++++++++-----------------------
 1 file changed, 21 insertions(+), 25 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 8cc0b2d53c6f..b882a77911e6 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -256,6 +256,8 @@ struct dsi_data {
 	struct platform_device *pdev;
 	void __iomem	*base;
 
+	int module_id;
+
 	int irq;
 
 	struct clk *dss_clk;
@@ -358,11 +360,6 @@ struct platform_device *dsi_get_dsidev_from_id(int module)
 	return dsi_pdev_map[module];
 }
 
-static inline int dsi_get_dsidev_id(struct platform_device *dsidev)
-{
-	return dsidev->id;
-}
-
 static inline void dsi_write_reg(struct platform_device *dsidev,
 		const struct dsi_reg idx, u32 val)
 {
@@ -1181,10 +1178,9 @@ static unsigned long dsi_get_txbyteclkhs(struct platform_device *dsidev)
 static unsigned long dsi_fclk_rate(struct platform_device *dsidev)
 {
 	unsigned long r;
-	int dsi_module = dsi_get_dsidev_id(dsidev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
-	if (dss_get_dsi_clk_source(dsi_module) == OMAP_DSS_CLK_SRC_FCK) {
+	if (dss_get_dsi_clk_source(dsi->module_id) == OMAP_DSS_CLK_SRC_FCK) {
 		/* DSI FCLK source is DSS_CLK_FCK */
 		r = clk_get_rate(dsi->dss_clk);
 	} else {
@@ -1683,7 +1679,7 @@ static void dsi_dump_dsidev_clocks(struct platform_device *dsidev,
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	struct dsi_clock_info *cinfo = &dsi->current_cinfo;
 	enum omap_dss_clk_source dispc_clk_src, dsi_clk_src;
-	int dsi_module = dsi_get_dsidev_id(dsidev);
+	int dsi_module = dsi->module_id;
 
 	dispc_clk_src = dss_get_dispc_clk_source();
 	dsi_clk_src = dss_get_dsi_clk_source(dsi_module);
@@ -1755,7 +1751,6 @@ static void dsi_dump_dsidev_irqs(struct platform_device *dsidev,
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	unsigned long flags;
 	struct dsi_irq_stats stats;
-	int dsi_module = dsi_get_dsidev_id(dsidev);
 
 	spin_lock_irqsave(&dsi->irq_stats_lock, flags);
 
@@ -1772,7 +1767,7 @@ static void dsi_dump_dsidev_irqs(struct platform_device *dsidev,
 #define PIS(x) \
 	seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]);
 
-	seq_printf(s, "-- DSI%d interrupts --\n", dsi_module + 1);
+	seq_printf(s, "-- DSI%d interrupts --\n", dsi->module_id + 1);
 	PIS(VC0);
 	PIS(VC1);
 	PIS(VC2);
@@ -2272,7 +2267,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 
 	DSSDBGF();
 
-	r = dss_dsi_enable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
+	r = dss_dsi_enable_pads(dsi->module_id, dsi_get_lane_mask(dssdev));
 	if (r)
 		return r;
 
@@ -2382,20 +2377,21 @@ err_cio_pwr:
 		dsi_cio_disable_lane_override(dsidev);
 err_scp_clk_dom:
 	dsi_disable_scp_clk(dsidev);
-	dss_dsi_disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
+	dss_dsi_disable_pads(dsi->module_id, dsi_get_lane_mask(dssdev));
 	return r;
 }
 
 static void dsi_cio_uninit(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
 	/* DDR_CLK_ALWAYS_ON */
 	REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 0, 13, 13);
 
 	dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_OFF);
 	dsi_disable_scp_clk(dsidev);
-	dss_dsi_disable_pads(dsi_get_dsidev_id(dsidev), dsi_get_lane_mask(dssdev));
+	dss_dsi_disable_pads(dsi->module_id, dsi_get_lane_mask(dssdev));
 }
 
 static void dsi_config_tx_fifo(struct platform_device *dsidev,
@@ -4272,7 +4268,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev)
 static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	int dsi_module = dsi_get_dsidev_id(dsidev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int r;
 
 	r = dsi_pll_init(dsidev, true, true);
@@ -4284,7 +4280,7 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 		goto err1;
 
 	dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
-	dss_select_dsi_clk_source(dsi_module, dssdev->clocks.dsi.dsi_fclk_src);
+	dss_select_dsi_clk_source(dsi->module_id, dssdev->clocks.dsi.dsi_fclk_src);
 	dss_select_lcd_clk_source(dssdev->manager->id,
 			dssdev->clocks.dispc.channel.lcd_clk_src);
 
@@ -4323,7 +4319,7 @@ err3:
 	dsi_cio_uninit(dssdev);
 err2:
 	dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
-	dss_select_dsi_clk_source(dsi_module, OMAP_DSS_CLK_SRC_FCK);
+	dss_select_dsi_clk_source(dsi->module_id, OMAP_DSS_CLK_SRC_FCK);
 	dss_select_lcd_clk_source(dssdev->manager->id, OMAP_DSS_CLK_SRC_FCK);
 
 err1:
@@ -4337,7 +4333,6 @@ static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-	int dsi_module = dsi_get_dsidev_id(dsidev);
 
 	if (enter_ulps && !dsi->ulps_enabled)
 		dsi_enter_ulps(dsidev);
@@ -4350,7 +4345,7 @@ static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
 	dsi_vc_enable(dsidev, 3, 0);
 
 	dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
-	dss_select_dsi_clk_source(dsi_module, OMAP_DSS_CLK_SRC_FCK);
+	dss_select_dsi_clk_source(dsi->module_id, OMAP_DSS_CLK_SRC_FCK);
 	dss_select_lcd_clk_source(dssdev->manager->id, OMAP_DSS_CLK_SRC_FCK);
 	dsi_cio_uninit(dssdev);
 	dsi_pll_uninit(dsidev, disconnect_lanes);
@@ -4611,7 +4606,7 @@ static void dsi_put_clocks(struct platform_device *dsidev)
 static int __init omap_dsihw_probe(struct platform_device *dsidev)
 {
 	u32 rev;
-	int r, i, dsi_module = dsi_get_dsidev_id(dsidev);
+	int r, i;
 	struct resource *dsi_mem;
 	struct dsi_data *dsi;
 	struct omap_dss_board_info *pdata = dsidev->dev.platform_data;
@@ -4620,8 +4615,9 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 	if (!dsi)
 		return -ENOMEM;
 
+	dsi->module_id = dsidev->id;
 	dsi->pdev = dsidev;
-	dsi_pdev_map[dsi_module] = dsidev;
+	dsi_pdev_map[dsi->module_id] = dsidev;
 	dev_set_drvdata(&dsidev->dev, dsi);
 
 	spin_lock_init(&dsi->irq_lock);
@@ -4707,7 +4703,7 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_DSI)
 			continue;
 
-		if (dssdev->phy.dsi.module != dsi_module)
+		if (dssdev->phy.dsi.module != dsi->module_id)
 			continue;
 
 		r = dsi_init_display(dssdev);
@@ -4724,15 +4720,15 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 
 	dsi_runtime_put(dsidev);
 
-	if (dsi_module == 0)
+	if (dsi->module_id == 0)
 		dss_debugfs_create_file("dsi1_regs", dsi1_dump_regs);
-	else if (dsi_module == 1)
+	else if (dsi->module_id == 1)
 		dss_debugfs_create_file("dsi2_regs", dsi2_dump_regs);
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
-	if (dsi_module == 0)
+	if (dsi->module_id == 0)
 		dss_debugfs_create_file("dsi1_irqs", dsi1_dump_irqs);
-	else if (dsi_module == 1)
+	else if (dsi->module_id == 1)
 		dss_debugfs_create_file("dsi2_irqs", dsi2_dump_irqs);
 #endif
 	return 0;
-- 
cgit v1.2.3


From 38f3daf678d909e8ee5638f21a34f35c01343420 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 2 May 2012 14:55:12 +0300
Subject: OMAPDSS: separate pdata based initialization

Move the platform-data based display device initialization into a
separate function, so that we may later add of-based initialization.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dpi.c  |  7 +++++-
 drivers/video/omap2/dss/dsi.c  | 50 ++++++++++++++++++++++++------------------
 drivers/video/omap2/dss/hdmi.c | 45 +++++++++++++++++++++----------------
 drivers/video/omap2/dss/rfbi.c | 45 +++++++++++++++++++++----------------
 drivers/video/omap2/dss/sdi.c  |  7 +++++-
 drivers/video/omap2/dss/venc.c | 45 +++++++++++++++++++++----------------
 6 files changed, 119 insertions(+), 80 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index de3454b91497..8c2056c9537b 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -365,7 +365,7 @@ static int __init dpi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int __init omap_dpi_probe(struct platform_device *pdev)
+static void __init dpi_probe_pdata(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	int i, r;
@@ -387,6 +387,11 @@ static int __init omap_dpi_probe(struct platform_device *pdev)
 			DSSERR("device %s register failed: %d\n",
 					dssdev->name, r);
 	}
+}
+
+static int __init omap_dpi_probe(struct platform_device *pdev)
+{
+	dpi_probe_pdata(pdev);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index b882a77911e6..e2aaf5a167fa 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4602,6 +4602,34 @@ static void dsi_put_clocks(struct platform_device *dsidev)
 		clk_put(dsi->sys_clk);
 }
 
+static void __init dsi_probe_pdata(struct platform_device *dsidev)
+{
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_dss_board_info *pdata = dsidev->dev.platform_data;
+	int i, r;
+
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_DSI)
+			continue;
+
+		if (dssdev->phy.dsi.module != dsi->module_id)
+			continue;
+
+		r = dsi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
+		r = omap_dss_register_device(dssdev, &dsidev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+					dssdev->name, r);
+	}
+}
+
 /* DSI1 HW IP initialisation */
 static int __init omap_dsihw_probe(struct platform_device *dsidev)
 {
@@ -4609,7 +4637,6 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 	int r, i;
 	struct resource *dsi_mem;
 	struct dsi_data *dsi;
-	struct omap_dss_board_info *pdata = dsidev->dev.platform_data;
 
 	dsi = devm_kzalloc(&dsidev->dev, sizeof(*dsi), GFP_KERNEL);
 	if (!dsi)
@@ -4697,26 +4724,7 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 	else
 		dsi->num_lanes_supported = 3;
 
-	for (i = 0; i < pdata->num_devices; ++i) {
-		struct omap_dss_device *dssdev = pdata->devices[i];
-
-		if (dssdev->type != OMAP_DISPLAY_TYPE_DSI)
-			continue;
-
-		if (dssdev->phy.dsi.module != dsi->module_id)
-			continue;
-
-		r = dsi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
-		}
-
-		r = omap_dss_register_device(dssdev, &dsidev->dev, i);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-				dssdev->name, r);
-	}
+	dsi_probe_pdata(dsidev);
 
 	dsi_runtime_put(dsidev);
 
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index fa1a054bb03b..5f2e2f677bef 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -771,12 +771,35 @@ static void hdmi_put_clocks(void)
 		clk_put(hdmi.sys_clk);
 }
 
+static void __init hdmi_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	int r, i;
+
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
+			continue;
+
+		r = hdmi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+					dssdev->name, r);
+	}
+}
+
 /* HDMI HW IP initialisation */
 static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 {
-	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	struct resource *hdmi_mem;
-	int r, i;
+	int r;
 
 	hdmi.pdev = pdev;
 
@@ -813,23 +836,7 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("hdmi", hdmi_dump_regs);
 
-	for (i = 0; i < pdata->num_devices; ++i) {
-		struct omap_dss_device *dssdev = pdata->devices[i];
-
-		if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
-			continue;
-
-		r = hdmi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
-		}
-
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-					dssdev->name, r);
-	}
+	hdmi_probe_pdata(pdev);
 
 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index f081f01b0b7d..3d8c206e90e5 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -927,14 +927,37 @@ static int __init rfbi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
+static void __init rfbi_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	int i, r;
+
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_DBI)
+			continue;
+
+		r = rfbi_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+				dssdev->name, r);
+	}
+}
+
 /* RFBI HW IP initialisation */
 static int __init omap_rfbihw_probe(struct platform_device *pdev)
 {
-	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	u32 rev;
 	struct resource *rfbi_mem;
 	struct clk *clk;
-	int r, i;
+	int r;
 
 	rfbi.pdev = pdev;
 
@@ -979,23 +1002,7 @@ static int __init omap_rfbihw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("rfbi", rfbi_dump_regs);
 
-	for (i = 0; i < pdata->num_devices; ++i) {
-		struct omap_dss_device *dssdev = pdata->devices[i];
-
-		if (dssdev->type != OMAP_DISPLAY_TYPE_DBI)
-			continue;
-
-		r = rfbi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
-		}
-
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-				dssdev->name, r);
-	}
+	rfbi_probe_pdata(pdev);
 
 	return 0;
 
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 2641a768f316..3a43dc2a9b46 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -176,7 +176,7 @@ static int __init sdi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int __init omap_sdi_probe(struct platform_device *pdev)
+static void __init sdi_probe_pdata(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	int i, r;
@@ -198,6 +198,11 @@ static int __init omap_sdi_probe(struct platform_device *pdev)
 			DSSERR("device %s register failed: %d\n",
 					dssdev->name, r);
 	}
+}
+
+static int __init omap_sdi_probe(struct platform_device *pdev)
+{
+	sdi_probe_pdata(pdev);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 005fdaa2cf7d..178c40d3312e 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -829,13 +829,36 @@ static void venc_put_clocks(void)
 		clk_put(venc.tv_dac_clk);
 }
 
+static void __init venc_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	int r, i;
+
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		if (dssdev->type != OMAP_DISPLAY_TYPE_VENC)
+			continue;
+
+		r = venc_init_display(dssdev);
+		if (r) {
+			DSSERR("device %s init failed: %d\n", dssdev->name, r);
+			continue;
+		}
+
+		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		if (r)
+			DSSERR("device %s register failed: %d\n",
+					dssdev->name, r);
+	}
+}
+
 /* VENC HW IP initialisation */
 static int __init omap_venchw_probe(struct platform_device *pdev)
 {
-	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	u8 rev_id;
 	struct resource *venc_mem;
-	int r, i;
+	int r;
 
 	venc.pdev = pdev;
 
@@ -877,23 +900,7 @@ static int __init omap_venchw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("venc", venc_dump_regs);
 
-	for (i = 0; i < pdata->num_devices; ++i) {
-		struct omap_dss_device *dssdev = pdata->devices[i];
-
-		if (dssdev->type != OMAP_DISPLAY_TYPE_VENC)
-			continue;
-
-		r = venc_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
-		}
-
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-					dssdev->name, r);
-	}
+	venc_probe_pdata(pdev);
 
 	return 0;
 
-- 
cgit v1.2.3


From af461d64e11f81db4a7619dd574fe779ae3a0884 Mon Sep 17 00:00:00 2001
From: Russ Dill <Russ.Dill@ti.com>
Date: Wed, 9 May 2012 15:08:08 -0700
Subject: OMAPDSS: TFP410: use gpio_set_value_cansleep

The Beagleboard xM gpio used for TFP410 powerdown is connected through
an I2C attached chip which means setting the GPIO can sleep. Code that
calls tfp410_power_on/off holds a mutex, so sleeping should be fine.

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-tfp410.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index f03964e5b6ab..bff306e041ca 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -64,7 +64,7 @@ static int tfp410_power_on(struct omap_dss_device *dssdev)
 		goto err0;
 
 	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value(ddata->pd_gpio, 1);
+		gpio_set_value_cansleep(ddata->pd_gpio, 1);
 
 	return 0;
 err0:
@@ -79,7 +79,7 @@ static void tfp410_power_off(struct omap_dss_device *dssdev)
 		return;
 
 	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value(ddata->pd_gpio, 0);
+		gpio_set_value_cansleep(ddata->pd_gpio, 0);
 
 	omapdss_dpi_display_disable(dssdev);
 }
-- 
cgit v1.2.3


From 027bdc85ee74f8f456a47dc53154252ef7d1792f Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Fri, 20 Apr 2012 17:17:46 -0500
Subject: OMAPDSS: HDMI: Split audio_enable into audio_enable/disable

To improve readability, split the audio_enable HDMI IP operation
into two separate functions for enabling and disabling audio.
The audio_enable function is also modified to return an error value.

While there, update these operations for the OMAP4 IP accordingly.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/dss_features.c    |  1 +
 drivers/video/omap2/dss/hdmi.c            |  4 ++--
 drivers/video/omap2/dss/ti_hdmi.h         |  7 +++++--
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 19 +++++++++++++++----
 4 files changed, 23 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 1d10a014bc55..3a28c5c79f46 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -575,6 +575,7 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
 	.audio_enable		=       ti_hdmi_4xxx_wp_audio_enable,
+	.audio_disable		=       ti_hdmi_4xxx_wp_audio_disable,
 #endif
 
 };
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 5f2e2f677bef..2a011401c8f2 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -557,12 +557,12 @@ static int hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		ip_data->ops->audio_enable(ip_data, true);
+		ip_data->ops->audio_enable(ip_data);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		ip_data->ops->audio_enable(ip_data, false);
+		ip_data->ops->audio_disable(ip_data);
 		break;
 	default:
 		err = -EINVAL;
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index 1f58b84d6901..88fdc1cda364 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -108,7 +108,9 @@ struct ti_hdmi_ip_ops {
 
 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-	void (*audio_enable)(struct hdmi_ip_data *ip_data, bool start);
+	int (*audio_enable)(struct hdmi_ip_data *ip_data);
+
+	void (*audio_disable)(struct hdmi_ip_data *ip_data);
 #endif
 
 };
@@ -183,6 +185,7 @@ void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-void ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data, bool enable);
+int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data);
 #endif
 #endif
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 35f59e47d7fe..39fbd6ad8429 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1247,13 +1247,24 @@ int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
 	return 0;
 }
 
-void ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data, bool enable)
+int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data)
 {
 	REG_FLD_MOD(hdmi_av_base(ip_data),
-				HDMI_CORE_AV_AUD_MODE, enable, 0, 0);
+		    HDMI_CORE_AV_AUD_MODE, true, 0, 0);
 	REG_FLD_MOD(hdmi_wp_base(ip_data),
-				HDMI_WP_AUDIO_CTRL, enable, 31, 31);
+		    HDMI_WP_AUDIO_CTRL, true, 31, 31);
 	REG_FLD_MOD(hdmi_wp_base(ip_data),
-				HDMI_WP_AUDIO_CTRL, enable, 30, 30);
+		    HDMI_WP_AUDIO_CTRL, true, 30, 30);
+	return 0;
+}
+
+void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data)
+{
+	REG_FLD_MOD(hdmi_av_base(ip_data),
+		    HDMI_CORE_AV_AUD_MODE, false, 0, 0);
+	REG_FLD_MOD(hdmi_wp_base(ip_data),
+		    HDMI_WP_AUDIO_CTRL, false, 31, 31);
+	REG_FLD_MOD(hdmi_wp_base(ip_data),
+		    HDMI_WP_AUDIO_CTRL, false, 30, 30);
 }
 #endif
-- 
cgit v1.2.3


From c0456be38fef2866b1dbeceb756485b001fa23b9 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Fri, 27 Apr 2012 13:48:45 -0500
Subject: OMAPDSS: HDMI: Split video_enable into video_enable/disable

To improve readability, split the video_enable HDMI IP operation
into two separate functions for enabling and disabling video.
The video_enable function is also modified to return an error value.

While there, update these operations for the OMAP4 IP accordingly.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/dss_features.c    |  1 +
 drivers/video/omap2/dss/hdmi.c            | 11 +++++++----
 drivers/video/omap2/dss/ti_hdmi.h         |  7 +++++--
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 10 ++++++++--
 4 files changed, 21 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 3a28c5c79f46..234ed8ad89ea 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -568,6 +568,7 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
 	.pll_enable		=	ti_hdmi_4xxx_pll_enable,
 	.pll_disable		=	ti_hdmi_4xxx_pll_disable,
 	.video_enable		=	ti_hdmi_4xxx_wp_video_start,
+	.video_disable		=	ti_hdmi_4xxx_wp_video_stop,
 	.dump_wrapper		=	ti_hdmi_4xxx_wp_dump,
 	.dump_core		=	ti_hdmi_4xxx_core_dump,
 	.dump_pll		=	ti_hdmi_4xxx_pll_dump,
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 2a011401c8f2..8f0549a2e796 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -324,7 +324,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 
 	hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
 
-	hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
+	hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
 
 	/* config the PLL and PHY hdmi_set_pll_pwrfirst */
 	r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
@@ -358,7 +358,9 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	/* tv size */
 	dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
 
-	hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 1);
+	r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
+	if (r)
+		goto err_vid_enable;
 
 	r = dss_mgr_enable(dssdev->manager);
 	if (r)
@@ -367,7 +369,8 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	return 0;
 
 err_mgr_enable:
-	hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
+	hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
+err_vid_enable:
 	hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
 	hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
 err:
@@ -379,7 +382,7 @@ static void hdmi_power_off(struct omap_dss_device *dssdev)
 {
 	dss_mgr_disable(dssdev->manager);
 
-	hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
+	hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
 	hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
 	hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
 	hdmi_runtime_put();
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index 88fdc1cda364..4c84a9cf2931 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -96,7 +96,9 @@ struct ti_hdmi_ip_ops {
 
 	void (*pll_disable)(struct hdmi_ip_data *ip_data);
 
-	void (*video_enable)(struct hdmi_ip_data *ip_data, bool start);
+	int (*video_enable)(struct hdmi_ip_data *ip_data);
+
+	void (*video_disable)(struct hdmi_ip_data *ip_data);
 
 	void (*dump_wrapper)(struct hdmi_ip_data *ip_data, struct seq_file *s);
 
@@ -175,7 +177,8 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data);
 int ti_hdmi_4xxx_read_edid(struct hdmi_ip_data *ip_data, u8 *edid, int len);
 bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data);
-void ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data, bool start);
+int ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_wp_video_stop(struct hdmi_ip_data *ip_data);
 int ti_hdmi_4xxx_pll_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 39fbd6ad8429..bc499bf30266 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -699,9 +699,15 @@ static void hdmi_wp_init(struct omap_video_timings *timings,
 
 }
 
-void ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data, bool start)
+int ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data)
 {
-	REG_FLD_MOD(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, start, 31, 31);
+	REG_FLD_MOD(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, true, 31, 31);
+	return 0;
+}
+
+void ti_hdmi_4xxx_wp_video_stop(struct hdmi_ip_data *ip_data)
+{
+	REG_FLD_MOD(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, false, 31, 31);
 }
 
 static void hdmi_wp_video_init_format(struct hdmi_video_format *video_fmt,
-- 
cgit v1.2.3


From 7c3291f06b4e025c4bd373adbb3f6354080f5097 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Thu, 15 Mar 2012 12:58:51 -0600
Subject: OMAPDSS: HDMI: Remove ASoC codec

Remove the ASoC OMAP HDMI audio codec. The goal of removing the codec
is to, in subsequent patches, give way to the implementation of the HDMI
audio support using the DSS device driver audio interface. This
approach will expose the HDMI audio functionality to any interested entity.

In a separate patch, ASoC will use this new approach to expose HDMI audio
to ALSA.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/hdmi.c            | 236 ------------------------------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h |   5 -
 2 files changed, 241 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 8f0549a2e796..0f8efc961e6b 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -33,12 +33,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <video/omapdss.h>
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-#include <sound/soc.h>
-#include <sound/pcm_params.h>
-#include "ti_hdmi_4xxx_ip.h"
-#endif
 
 #include "ti_hdmi.h"
 #include "dss.h"
@@ -539,220 +533,6 @@ void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
 	mutex_unlock(&hdmi.lock);
 }
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-
-static int hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
-				struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_codec *codec = rtd->codec;
-	struct platform_device *pdev = to_platform_device(codec->dev);
-	struct hdmi_ip_data *ip_data = snd_soc_codec_get_drvdata(codec);
-	int err = 0;
-
-	if (!(ip_data->ops) && !(ip_data->ops->audio_enable)) {
-		dev_err(&pdev->dev, "Cannot enable/disable audio\n");
-		return -ENODEV;
-	}
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		ip_data->ops->audio_enable(ip_data);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		ip_data->ops->audio_disable(ip_data);
-		break;
-	default:
-		err = -EINVAL;
-	}
-	return err;
-}
-
-static int hdmi_audio_hw_params(struct snd_pcm_substream *substream,
-				    struct snd_pcm_hw_params *params,
-				    struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_codec *codec = rtd->codec;
-	struct hdmi_ip_data *ip_data = snd_soc_codec_get_drvdata(codec);
-	struct hdmi_audio_format audio_format;
-	struct hdmi_audio_dma audio_dma;
-	struct hdmi_core_audio_config core_cfg;
-	struct hdmi_core_infoframe_audio aud_if_cfg;
-	int err, n, cts;
-	enum hdmi_core_audio_sample_freq sample_freq;
-
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S16_LE:
-		core_cfg.i2s_cfg.word_max_length =
-			HDMI_AUDIO_I2S_MAX_WORD_20BITS;
-		core_cfg.i2s_cfg.word_length = HDMI_AUDIO_I2S_CHST_WORD_16_BITS;
-		core_cfg.i2s_cfg.in_length_bits =
-			HDMI_AUDIO_I2S_INPUT_LENGTH_16;
-		core_cfg.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_LEFT;
-		audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_TWOSAMPLES;
-		audio_format.sample_size = HDMI_AUDIO_SAMPLE_16BITS;
-		audio_format.justification = HDMI_AUDIO_JUSTIFY_LEFT;
-		audio_dma.transfer_size = 0x10;
-		break;
-	case SNDRV_PCM_FORMAT_S24_LE:
-		core_cfg.i2s_cfg.word_max_length =
-			HDMI_AUDIO_I2S_MAX_WORD_24BITS;
-		core_cfg.i2s_cfg.word_length = HDMI_AUDIO_I2S_CHST_WORD_24_BITS;
-		core_cfg.i2s_cfg.in_length_bits =
-			HDMI_AUDIO_I2S_INPUT_LENGTH_24;
-		audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_ONESAMPLE;
-		audio_format.sample_size = HDMI_AUDIO_SAMPLE_24BITS;
-		audio_format.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
-		core_cfg.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
-		audio_dma.transfer_size = 0x20;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (params_rate(params)) {
-	case 32000:
-		sample_freq = HDMI_AUDIO_FS_32000;
-		break;
-	case 44100:
-		sample_freq = HDMI_AUDIO_FS_44100;
-		break;
-	case 48000:
-		sample_freq = HDMI_AUDIO_FS_48000;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	err = hdmi_config_audio_acr(ip_data, params_rate(params), &n, &cts);
-	if (err < 0)
-		return err;
-
-	/* Audio wrapper config */
-	audio_format.stereo_channels = HDMI_AUDIO_STEREO_ONECHANNEL;
-	audio_format.active_chnnls_msk = 0x03;
-	audio_format.type = HDMI_AUDIO_TYPE_LPCM;
-	audio_format.sample_order = HDMI_AUDIO_SAMPLE_LEFT_FIRST;
-	/* Disable start/stop signals of IEC 60958 blocks */
-	audio_format.en_sig_blk_strt_end = HDMI_AUDIO_BLOCK_SIG_STARTEND_OFF;
-
-	audio_dma.block_size = 0xC0;
-	audio_dma.mode = HDMI_AUDIO_TRANSF_DMA;
-	audio_dma.fifo_threshold = 0x20; /* in number of samples */
-
-	hdmi_wp_audio_config_dma(ip_data, &audio_dma);
-	hdmi_wp_audio_config_format(ip_data, &audio_format);
-
-	/*
-	 * I2S config
-	 */
-	core_cfg.i2s_cfg.en_high_bitrate_aud = false;
-	/* Only used with high bitrate audio */
-	core_cfg.i2s_cfg.cbit_order = false;
-	/* Serial data and word select should change on sck rising edge */
-	core_cfg.i2s_cfg.sck_edge_mode = HDMI_AUDIO_I2S_SCK_EDGE_RISING;
-	core_cfg.i2s_cfg.vbit = HDMI_AUDIO_I2S_VBIT_FOR_PCM;
-	/* Set I2S word select polarity */
-	core_cfg.i2s_cfg.ws_polarity = HDMI_AUDIO_I2S_WS_POLARITY_LOW_IS_LEFT;
-	core_cfg.i2s_cfg.direction = HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST;
-	/* Set serial data to word select shift. See Phillips spec. */
-	core_cfg.i2s_cfg.shift = HDMI_AUDIO_I2S_FIRST_BIT_SHIFT;
-	/* Enable one of the four available serial data channels */
-	core_cfg.i2s_cfg.active_sds = HDMI_AUDIO_I2S_SD0_EN;
-
-	/* Core audio config */
-	core_cfg.freq_sample = sample_freq;
-	core_cfg.n = n;
-	core_cfg.cts = cts;
-	if (dss_has_feature(FEAT_HDMI_CTS_SWMODE)) {
-		core_cfg.aud_par_busclk = 0;
-		core_cfg.cts_mode = HDMI_AUDIO_CTS_MODE_SW;
-		core_cfg.use_mclk = dss_has_feature(FEAT_HDMI_AUDIO_USE_MCLK);
-	} else {
-		core_cfg.aud_par_busclk = (((128 * 31) - 1) << 8);
-		core_cfg.cts_mode = HDMI_AUDIO_CTS_MODE_HW;
-		core_cfg.use_mclk = true;
-	}
-
-	if (core_cfg.use_mclk)
-		core_cfg.mclk_mode = HDMI_AUDIO_MCLK_128FS;
-	core_cfg.layout = HDMI_AUDIO_LAYOUT_2CH;
-	core_cfg.en_spdif = false;
-	/* Use sample frequency from channel status word */
-	core_cfg.fs_override = true;
-	/* Enable ACR packets */
-	core_cfg.en_acr_pkt = true;
-	/* Disable direct streaming digital audio */
-	core_cfg.en_dsd_audio = false;
-	/* Use parallel audio interface */
-	core_cfg.en_parallel_aud_input = true;
-
-	hdmi_core_audio_config(ip_data, &core_cfg);
-
-	/*
-	 * Configure packet
-	 * info frame audio see doc CEA861-D page 74
-	 */
-	aud_if_cfg.db1_coding_type = HDMI_INFOFRAME_AUDIO_DB1CT_FROM_STREAM;
-	aud_if_cfg.db1_channel_count = 2;
-	aud_if_cfg.db2_sample_freq = HDMI_INFOFRAME_AUDIO_DB2SF_FROM_STREAM;
-	aud_if_cfg.db2_sample_size = HDMI_INFOFRAME_AUDIO_DB2SS_FROM_STREAM;
-	aud_if_cfg.db4_channel_alloc = 0x00;
-	aud_if_cfg.db5_downmix_inh = false;
-	aud_if_cfg.db5_lsv = 0;
-
-	hdmi_core_audio_infoframe_config(ip_data, &aud_if_cfg);
-	return 0;
-}
-
-static int hdmi_audio_startup(struct snd_pcm_substream *substream,
-				  struct snd_soc_dai *dai)
-{
-	if (!hdmi.ip_data.cfg.cm.mode) {
-		pr_err("Current video settings do not support audio.\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-static int hdmi_audio_codec_probe(struct snd_soc_codec *codec)
-{
-	struct hdmi_ip_data *priv = &hdmi.ip_data;
-
-	snd_soc_codec_set_drvdata(codec, priv);
-	return 0;
-}
-
-static struct snd_soc_codec_driver hdmi_audio_codec_drv = {
-	.probe = hdmi_audio_codec_probe,
-};
-
-static struct snd_soc_dai_ops hdmi_audio_codec_ops = {
-	.hw_params = hdmi_audio_hw_params,
-	.trigger = hdmi_audio_trigger,
-	.startup = hdmi_audio_startup,
-};
-
-static struct snd_soc_dai_driver hdmi_codec_dai_drv = {
-		.name = "hdmi-audio-codec",
-		.playback = {
-			.channels_min = 2,
-			.channels_max = 2,
-			.rates = SNDRV_PCM_RATE_32000 |
-				SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE |
-				SNDRV_PCM_FMTBIT_S24_LE,
-		},
-		.ops = &hdmi_audio_codec_ops,
-};
-#endif
-
 static int hdmi_get_clocks(struct platform_device *pdev)
 {
 	struct clk *clk;
@@ -841,17 +621,6 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 
 	hdmi_probe_pdata(pdev);
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-
-	/* Register ASoC codec DAI */
-	r = snd_soc_register_codec(&pdev->dev, &hdmi_audio_codec_drv,
-					&hdmi_codec_dai_drv, 1);
-	if (r) {
-		DSSERR("can't register ASoC HDMI audio codec\n");
-		return r;
-	}
-#endif
 	return 0;
 }
 
@@ -861,11 +630,6 @@ static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
 
 	hdmi_panel_exit();
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-	snd_soc_unregister_codec(&pdev->dev);
-#endif
-
 	pm_runtime_disable(&pdev->dev);
 
 	hdmi_put_clocks();
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index b724bc68307a..bc221435a984 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -24,11 +24,6 @@
 #include <linux/string.h>
 #include <video/omapdss.h>
 #include "ti_hdmi.h"
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-#include <sound/soc.h>
-#include <sound/pcm_params.h>
-#endif
 
 /* HDMI Wrapper */
 
-- 
cgit v1.2.3


From 199e7fd6219cac2065a0e7e09d9d505e1f03f29e Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Thu, 15 Mar 2012 10:39:00 -0600
Subject: OMAPDSS: HDMI: OMAP4: Remove CEA-861 audio infoframe and IEC-60958
 enums

Instead of having its own definitions for CEA-861 and IEC-60958, the HDMI
driver should use those provided by ALSA. This patch removes the definitions
that are already provided by ALSA.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 34 +++++++------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 81 +------------------------------
 2 files changed, 20 insertions(+), 95 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index bc499bf30266..e9e8b0d4bddc 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -29,6 +29,10 @@
 #include <linux/string.h>
 #include <linux/seq_file.h>
 #include <linux/gpio.h>
+#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
+	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#include <sound/asound.h>
+#endif
 
 #include "ti_hdmi_4xxx_ip.h"
 #include "dss.h"
@@ -1145,9 +1149,8 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 }
 
 void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
-		struct hdmi_core_infoframe_audio *info_aud)
+		struct snd_cea_861_aud_if *info_aud)
 {
-	u8 val;
 	u8 sum = 0, checksum = 0;
 	void __iomem *av_base = hdmi_av_base(ip_data);
 
@@ -1161,24 +1164,23 @@ void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
 	hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_LEN, 0x0a);
 	sum += 0x84 + 0x001 + 0x00a;
 
-	val = (info_aud->db1_coding_type << 4)
-			| (info_aud->db1_channel_count - 1);
-	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(0), val);
-	sum += val;
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(0),
+		       info_aud->db1_ct_cc);
+	sum += info_aud->db1_ct_cc;
 
-	val = (info_aud->db2_sample_freq << 2) | info_aud->db2_sample_size;
-	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(1), val);
-	sum += val;
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(1),
+		       info_aud->db2_sf_ss);
+	sum += info_aud->db2_sf_ss;
 
-	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(2), 0x00);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(2), info_aud->db3);
+	sum += info_aud->db3;
 
-	val = info_aud->db4_channel_alloc;
-	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(3), val);
-	sum += val;
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(3), info_aud->db4_ca);
+	sum += info_aud->db4_ca;
 
-	val = (info_aud->db5_downmix_inh << 7) | (info_aud->db5_lsv << 3);
-	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(4), val);
-	sum += val;
+	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(4),
+		       info_aud->db5_dminh_lsv);
+	sum += info_aud->db5_dminh_lsv;
 
 	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(5), 0x00);
 	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(6), 0x00);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index bc221435a984..9a08fbfdd1c7 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -274,35 +274,6 @@ enum hdmi_core_infoframe {
 	HDMI_INFOFRAME_AVI_DB5PR_8 = 7,
 	HDMI_INFOFRAME_AVI_DB5PR_9 = 8,
 	HDMI_INFOFRAME_AVI_DB5PR_10 = 9,
-	HDMI_INFOFRAME_AUDIO_DB1CT_FROM_STREAM = 0,
-	HDMI_INFOFRAME_AUDIO_DB1CT_IEC60958 = 1,
-	HDMI_INFOFRAME_AUDIO_DB1CT_AC3 = 2,
-	HDMI_INFOFRAME_AUDIO_DB1CT_MPEG1 = 3,
-	HDMI_INFOFRAME_AUDIO_DB1CT_MP3 = 4,
-	HDMI_INFOFRAME_AUDIO_DB1CT_MPEG2_MULTICH = 5,
-	HDMI_INFOFRAME_AUDIO_DB1CT_AAC = 6,
-	HDMI_INFOFRAME_AUDIO_DB1CT_DTS = 7,
-	HDMI_INFOFRAME_AUDIO_DB1CT_ATRAC = 8,
-	HDMI_INFOFRAME_AUDIO_DB1CT_ONEBIT = 9,
-	HDMI_INFOFRAME_AUDIO_DB1CT_DOLBY_DIGITAL_PLUS = 10,
-	HDMI_INFOFRAME_AUDIO_DB1CT_DTS_HD = 11,
-	HDMI_INFOFRAME_AUDIO_DB1CT_MAT = 12,
-	HDMI_INFOFRAME_AUDIO_DB1CT_DST = 13,
-	HDMI_INFOFRAME_AUDIO_DB1CT_WMA_PRO = 14,
-	HDMI_INFOFRAME_AUDIO_DB2SF_FROM_STREAM = 0,
-	HDMI_INFOFRAME_AUDIO_DB2SF_32000 = 1,
-	HDMI_INFOFRAME_AUDIO_DB2SF_44100 = 2,
-	HDMI_INFOFRAME_AUDIO_DB2SF_48000 = 3,
-	HDMI_INFOFRAME_AUDIO_DB2SF_88200 = 4,
-	HDMI_INFOFRAME_AUDIO_DB2SF_96000 = 5,
-	HDMI_INFOFRAME_AUDIO_DB2SF_176400 = 6,
-	HDMI_INFOFRAME_AUDIO_DB2SF_192000 = 7,
-	HDMI_INFOFRAME_AUDIO_DB2SS_FROM_STREAM = 0,
-	HDMI_INFOFRAME_AUDIO_DB2SS_16BIT = 1,
-	HDMI_INFOFRAME_AUDIO_DB2SS_20BIT = 2,
-	HDMI_INFOFRAME_AUDIO_DB2SS_24BIT = 3,
-	HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PERMITTED = 0,
-	HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PROHIBITED = 1
 };
 
 enum hdmi_packing_mode {
@@ -312,17 +283,6 @@ enum hdmi_packing_mode {
 	HDMI_PACK_ALREADYPACKED = 7
 };
 
-enum hdmi_core_audio_sample_freq {
-	HDMI_AUDIO_FS_32000 = 0x3,
-	HDMI_AUDIO_FS_44100 = 0x0,
-	HDMI_AUDIO_FS_48000 = 0x2,
-	HDMI_AUDIO_FS_88200 = 0x8,
-	HDMI_AUDIO_FS_96000 = 0xA,
-	HDMI_AUDIO_FS_176400 = 0xC,
-	HDMI_AUDIO_FS_192000 = 0xE,
-	HDMI_AUDIO_FS_NOT_INDICATED = 0x1
-};
-
 enum hdmi_core_audio_layout {
 	HDMI_AUDIO_LAYOUT_2CH = 0,
 	HDMI_AUDIO_LAYOUT_8CH = 1
@@ -381,33 +341,10 @@ enum hdmi_audio_i2s_config {
 	HDMI_AUDIO_I2S_WS_POLARIT_YLOW_IS_RIGHT = 1,
 	HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST = 0,
 	HDMI_AUDIO_I2S_LSB_SHIFTED_FIRST = 1,
-	HDMI_AUDIO_I2S_MAX_WORD_20BITS = 0,
-	HDMI_AUDIO_I2S_MAX_WORD_24BITS = 1,
-	HDMI_AUDIO_I2S_CHST_WORD_NOT_SPECIFIED = 0,
-	HDMI_AUDIO_I2S_CHST_WORD_16_BITS = 1,
-	HDMI_AUDIO_I2S_CHST_WORD_17_BITS = 6,
-	HDMI_AUDIO_I2S_CHST_WORD_18_BITS = 2,
-	HDMI_AUDIO_I2S_CHST_WORD_19_BITS = 4,
-	HDMI_AUDIO_I2S_CHST_WORD_20_BITS_20MAX = 5,
-	HDMI_AUDIO_I2S_CHST_WORD_20_BITS_24MAX = 1,
-	HDMI_AUDIO_I2S_CHST_WORD_21_BITS = 6,
-	HDMI_AUDIO_I2S_CHST_WORD_22_BITS = 2,
-	HDMI_AUDIO_I2S_CHST_WORD_23_BITS = 4,
-	HDMI_AUDIO_I2S_CHST_WORD_24_BITS = 5,
 	HDMI_AUDIO_I2S_SCK_EDGE_FALLING = 0,
 	HDMI_AUDIO_I2S_SCK_EDGE_RISING = 1,
 	HDMI_AUDIO_I2S_VBIT_FOR_PCM = 0,
 	HDMI_AUDIO_I2S_VBIT_FOR_COMPRESSED = 1,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_NA = 0,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_16 = 2,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_17 = 12,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_18 = 4,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_19 = 8,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_20 = 10,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_21 = 13,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_22 = 5,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_23 = 9,
-	HDMI_AUDIO_I2S_INPUT_LENGTH_24 = 11,
 	HDMI_AUDIO_I2S_FIRST_BIT_SHIFT = 0,
 	HDMI_AUDIO_I2S_FIRST_BIT_NO_SHIFT = 1,
 	HDMI_AUDIO_I2S_SD0_EN = 1,
@@ -436,20 +373,6 @@ struct hdmi_core_video_config {
 	enum hdmi_core_tclkselclkmult	tclk_sel_clkmult;
 };
 
-/*
- * Refer to section 8.2 in HDMI 1.3 specification for
- * details about infoframe databytes
- */
-struct hdmi_core_infoframe_audio {
-	u8 db1_coding_type;
-	u8 db1_channel_count;
-	u8 db2_sample_freq;
-	u8 db2_sample_size;
-	u8 db4_channel_alloc;
-	bool db5_downmix_inh;
-	u8 db5_lsv;	/* Level shift values for downmix */
-};
-
 struct hdmi_core_packet_enable_repeat {
 	u32	audio_pkt;
 	u32	audio_pkt_repeat;
@@ -502,7 +425,7 @@ struct hdmi_core_audio_i2s_config {
 
 struct hdmi_core_audio_config {
 	struct hdmi_core_audio_i2s_config	i2s_cfg;
-	enum hdmi_core_audio_sample_freq	freq_sample;
+	u32					freq_sample;
 	bool					fs_override;
 	u32					n;
 	u32					cts;
@@ -522,7 +445,7 @@ struct hdmi_core_audio_config {
 int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
 				u32 sample_freq, u32 *n, u32 *cts);
 void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
-		struct hdmi_core_infoframe_audio *info_aud);
+		struct snd_cea_861_aud_if *info_aud);
 void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 					struct hdmi_core_audio_config *cfg);
 void hdmi_wp_audio_config_dma(struct hdmi_ip_data *ip_data,
-- 
cgit v1.2.3


From 7c92af16780c614b493c4e8a9f495f9dc8008de4 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Mon, 19 Mar 2012 09:30:21 -0600
Subject: OMAPDSS: HDMI: OMAP4: Remove invalid I2S settings

According to the most up-to-date documentation from Texas Instruments,
the configuration of High Bitrate Audio is not possible. Also, it is
not possible to set polarity of the I2S Word Select signal. This patch
removes the invalid settings.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 3 ---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 5 -----
 2 files changed, 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index e9e8b0d4bddc..a1cbd2fe9889 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1119,11 +1119,8 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 						cfg->freq_sample, 3, 0);
 
 	r = hdmi_read_reg(av_base, HDMI_CORE_AV_I2S_IN_CTRL);
-	r = FLD_MOD(r, cfg->i2s_cfg.en_high_bitrate_aud, 7, 7);
 	r = FLD_MOD(r, cfg->i2s_cfg.sck_edge_mode, 6, 6);
-	r = FLD_MOD(r, cfg->i2s_cfg.cbit_order, 5, 5);
 	r = FLD_MOD(r, cfg->i2s_cfg.vbit, 4, 4);
-	r = FLD_MOD(r, cfg->i2s_cfg.ws_polarity, 3, 3);
 	r = FLD_MOD(r, cfg->i2s_cfg.justification, 2, 2);
 	r = FLD_MOD(r, cfg->i2s_cfg.direction, 1, 1);
 	r = FLD_MOD(r, cfg->i2s_cfg.shift, 0, 0);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index 9a08fbfdd1c7..ffc08da89cea 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -337,8 +337,6 @@ enum hdmi_audio_blk_strt_end_sig {
 };
 
 enum hdmi_audio_i2s_config {
-	HDMI_AUDIO_I2S_WS_POLARITY_LOW_IS_LEFT = 0,
-	HDMI_AUDIO_I2S_WS_POLARIT_YLOW_IS_RIGHT = 1,
 	HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST = 0,
 	HDMI_AUDIO_I2S_LSB_SHIFTED_FIRST = 1,
 	HDMI_AUDIO_I2S_SCK_EDGE_FALLING = 0,
@@ -413,11 +411,8 @@ struct hdmi_core_audio_i2s_config {
 	u8 word_length;
 	u8 in_length_bits;
 	u8 justification;
-	u8 en_high_bitrate_aud;
 	u8 sck_edge_mode;
-	u8 cbit_order;
 	u8 vbit;
-	u8 ws_polarity;
 	u8 direction;
 	u8 shift;
 	u8 active_sds;
-- 
cgit v1.2.3


From 3df9fb5c51ca617e410da890f631100ea9f10652 Mon Sep 17 00:00:00 2001
From: Axel Castaneda Gonzalez <x0055901@ti.com>
Date: Thu, 3 May 2012 09:00:21 -0500
Subject: OMAPDSS: HDMI: Decouple wrapper enable/disable and audio start/stop

Decouple the enable/disable operation of the HDMI audio wrapper from
audio start/stop. Otherwise, an audio FIFO underflow may occur. The
audio wrapper enablement must be done after configuration and
before audio playback is started.

Signed-off-by: Axel Castaneda Gonzalez <x0055901@ti.com>
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/dss_features.c    |  2 ++
 drivers/video/omap2/dss/ti_hdmi.h         |  6 ++++++
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 19 ++++++++++++++-----
 3 files changed, 22 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 234ed8ad89ea..13b45af5e89d 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -577,6 +577,8 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
 	.audio_enable		=       ti_hdmi_4xxx_wp_audio_enable,
 	.audio_disable		=       ti_hdmi_4xxx_wp_audio_disable,
+	.audio_start		=       ti_hdmi_4xxx_audio_start,
+	.audio_stop		=       ti_hdmi_4xxx_audio_stop,
 #endif
 
 };
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index 4c84a9cf2931..8afdd0b7678a 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -113,6 +113,10 @@ struct ti_hdmi_ip_ops {
 	int (*audio_enable)(struct hdmi_ip_data *ip_data);
 
 	void (*audio_disable)(struct hdmi_ip_data *ip_data);
+
+	int (*audio_start)(struct hdmi_ip_data *ip_data);
+
+	void (*audio_stop)(struct hdmi_ip_data *ip_data);
 #endif
 
 };
@@ -190,5 +194,7 @@ void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
 int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data);
+int ti_hdmi_4xxx_audio_start(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_audio_stop(struct hdmi_ip_data *ip_data);
 #endif
 #endif
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index a1cbd2fe9889..7b524de831a1 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1254,21 +1254,30 @@ int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
 
 int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data)
 {
-	REG_FLD_MOD(hdmi_av_base(ip_data),
-		    HDMI_CORE_AV_AUD_MODE, true, 0, 0);
 	REG_FLD_MOD(hdmi_wp_base(ip_data),
 		    HDMI_WP_AUDIO_CTRL, true, 31, 31);
+	return 0;
+}
+
+void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data)
+{
+	REG_FLD_MOD(hdmi_wp_base(ip_data),
+		    HDMI_WP_AUDIO_CTRL, false, 31, 31);
+}
+
+int ti_hdmi_4xxx_audio_start(struct hdmi_ip_data *ip_data)
+{
+	REG_FLD_MOD(hdmi_av_base(ip_data),
+		    HDMI_CORE_AV_AUD_MODE, true, 0, 0);
 	REG_FLD_MOD(hdmi_wp_base(ip_data),
 		    HDMI_WP_AUDIO_CTRL, true, 30, 30);
 	return 0;
 }
 
-void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data)
+void ti_hdmi_4xxx_audio_stop(struct hdmi_ip_data *ip_data)
 {
 	REG_FLD_MOD(hdmi_av_base(ip_data),
 		    HDMI_CORE_AV_AUD_MODE, false, 0, 0);
-	REG_FLD_MOD(hdmi_wp_base(ip_data),
-		    HDMI_WP_AUDIO_CTRL, false, 31, 31);
 	REG_FLD_MOD(hdmi_wp_base(ip_data),
 		    HDMI_WP_AUDIO_CTRL, false, 30, 30);
 }
-- 
cgit v1.2.3


From 7e151f7f6abdd75831797ae45ec2aa3d0a648416 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Thu, 15 Mar 2012 14:08:03 -0600
Subject: OMAPDSS: HDMI: Decouple HDMI audio from ASoC

Instead of having OMAPDSS HDMI audio functionality depending on the
ASoC HDMI audio driver, use a new config option so that
potential users, including ASoC, may select if needed.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/Kconfig           | 4 ++++
 drivers/video/omap2/dss/dss_features.c    | 3 +--
 drivers/video/omap2/dss/ti_hdmi.h         | 6 ++----
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 6 ++----
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 3 +--
 5 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 9aaf3246f821..43324e5ed25f 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -68,6 +68,10 @@ config OMAP4_DSS_HDMI
 	  HDMI Interface. This adds the High Definition Multimedia Interface.
 	  See http://www.hdmi.org/ for HDMI specification.
 
+config OMAP4_DSS_HDMI_AUDIO
+	bool
+	depends on OMAP4_DSS_HDMI
+
 config OMAP2_DSS_SDI
 	bool "SDI support"
 	depends on ARCH_OMAP3
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 13b45af5e89d..1c939fb6debc 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -573,8 +573,7 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
 	.dump_core		=	ti_hdmi_4xxx_core_dump,
 	.dump_pll		=	ti_hdmi_4xxx_pll_dump,
 	.dump_phy		=	ti_hdmi_4xxx_phy_dump,
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 	.audio_enable		=       ti_hdmi_4xxx_wp_audio_enable,
 	.audio_disable		=       ti_hdmi_4xxx_wp_audio_disable,
 	.audio_start		=       ti_hdmi_4xxx_audio_start,
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index 8afdd0b7678a..6aedb898a918 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -108,8 +108,7 @@ struct ti_hdmi_ip_ops {
 
 	void (*dump_phy)(struct hdmi_ip_data *ip_data, struct seq_file *s);
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 	int (*audio_enable)(struct hdmi_ip_data *ip_data);
 
 	void (*audio_disable)(struct hdmi_ip_data *ip_data);
@@ -190,8 +189,7 @@ void ti_hdmi_4xxx_wp_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 void ti_hdmi_4xxx_pll_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data);
 int ti_hdmi_4xxx_audio_start(struct hdmi_ip_data *ip_data);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 7b524de831a1..f503c9d12b2f 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -29,8 +29,7 @@
 #include <linux/string.h>
 #include <linux/seq_file.h>
 #include <linux/gpio.h>
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 #include <sound/asound.h>
 #endif
 
@@ -1024,8 +1023,7 @@ void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
 	DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
 }
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 void hdmi_wp_audio_config_format(struct hdmi_ip_data *ip_data,
 					struct hdmi_audio_format *aud_fmt)
 {
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index ffc08da89cea..914be3dbf71d 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -435,8 +435,7 @@ struct hdmi_core_audio_config {
 	bool					en_spdif;
 };
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
 				u32 sample_freq, u32 *n, u32 *cts);
 void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
-- 
cgit v1.2.3


From c1164ed87ea592c2001a0040ffbf9a75cf501d1c Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Mon, 19 Mar 2012 12:27:41 -0600
Subject: OMAPDSS: HDMI: OMAP4: Expand configuration for IEC-60958 audio

Utilize a snd_aes_iec958 struct to write the parameters of the IEC-60958
channel status word into the HDMI IP registers. Hence, the user of the
driver has full control of what parameters are written in the word.

Also, some of the parameters of the I2S structure have been removed
as they are actually IEC-60958 parameters.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 29 +++++++++++++++++++----------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h |  4 +---
 2 files changed, 20 insertions(+), 13 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index f503c9d12b2f..b572101c1d03 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1112,10 +1112,25 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 	REG_FLD_MOD(av_base, HDMI_CORE_AV_SPDIF_CTRL,
 						cfg->fs_override, 1, 1);
 
-	/* I2S parameters */
-	REG_FLD_MOD(av_base, HDMI_CORE_AV_I2S_CHST4,
-						cfg->freq_sample, 3, 0);
-
+	/*
+	 * Set IEC-60958-3 channel status word. It is passed to the IP
+	 * just as it is received. The user of the driver is responsible
+	 * for its contents.
+	 */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST0,
+		       cfg->iec60958_cfg->status[0]);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST1,
+		       cfg->iec60958_cfg->status[1]);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST2,
+		       cfg->iec60958_cfg->status[2]);
+	/* yes, this is correct: status[3] goes to CHST4 register */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST4,
+		       cfg->iec60958_cfg->status[3]);
+	/* yes, this is correct: status[4] goes to CHST5 register */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST5,
+		       cfg->iec60958_cfg->status[4]);
+
+	/* set I2S parameters */
 	r = hdmi_read_reg(av_base, HDMI_CORE_AV_I2S_IN_CTRL);
 	r = FLD_MOD(r, cfg->i2s_cfg.sck_edge_mode, 6, 6);
 	r = FLD_MOD(r, cfg->i2s_cfg.vbit, 4, 4);
@@ -1124,12 +1139,6 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 	r = FLD_MOD(r, cfg->i2s_cfg.shift, 0, 0);
 	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_IN_CTRL, r);
 
-	r = hdmi_read_reg(av_base, HDMI_CORE_AV_I2S_CHST5);
-	r = FLD_MOD(r, cfg->freq_sample, 7, 4);
-	r = FLD_MOD(r, cfg->i2s_cfg.word_length, 3, 1);
-	r = FLD_MOD(r, cfg->i2s_cfg.word_max_length, 0, 0);
-	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST5, r);
-
 	REG_FLD_MOD(av_base, HDMI_CORE_AV_I2S_IN_LEN,
 			cfg->i2s_cfg.in_length_bits, 3, 0);
 
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index 914be3dbf71d..4510edba4406 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -407,8 +407,6 @@ struct hdmi_audio_dma {
 };
 
 struct hdmi_core_audio_i2s_config {
-	u8 word_max_length;
-	u8 word_length;
 	u8 in_length_bits;
 	u8 justification;
 	u8 sck_edge_mode;
@@ -420,7 +418,7 @@ struct hdmi_core_audio_i2s_config {
 
 struct hdmi_core_audio_config {
 	struct hdmi_core_audio_i2s_config	i2s_cfg;
-	u32					freq_sample;
+	struct snd_aes_iec958			*iec60958_cfg;
 	bool					fs_override;
 	u32					n;
 	u32					cts;
-- 
cgit v1.2.3


From 35547626f3cc527d5e899bbfbac6b9e373f47aa0 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Tue, 20 Mar 2012 21:02:01 -0600
Subject: OMAPDSS: HDMI: Relocate N/CTS calculation

The N and CTS parameters are relevant to all HDMI implementations and
not specific to a given IP. Hence, the calculation is relocated
into the generic HDMI driver.

Also, deep color is not queried but it is still considered in the
calculation of N. This is to be changed when deep color functionality is
implemented in the driver.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/hdmi.c            | 42 +++++++++++++++++++++++
 drivers/video/omap2/dss/ti_hdmi.h         |  1 +
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 57 -------------------------------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h |  2 --
 4 files changed, 43 insertions(+), 59 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 0f8efc961e6b..0cdb11976091 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -554,6 +554,48 @@ static void hdmi_put_clocks(void)
 		clk_put(hdmi.sys_clk);
 }
 
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts)
+{
+	u32 deep_color;
+	u32 pclk = hdmi.ip_data.cfg.timings.pixel_clock;
+
+	if (n == NULL || cts == NULL)
+		return -EINVAL;
+
+	/* TODO: When implemented, query deep color mode here. */
+	deep_color = 100;
+
+	switch (sample_freq) {
+	case 32000:
+		if ((deep_color == 125) && ((pclk == 54054) ||
+					    (pclk == 74250)))
+			*n = 8192;
+		else
+			*n = 4096;
+		break;
+	case 44100:
+		*n = 6272;
+		break;
+	case 48000:
+		if ((deep_color == 125) && ((pclk == 54054) ||
+					    (pclk == 74250)))
+			*n = 8192;
+		else
+			*n = 6144;
+		break;
+	default:
+		*n = 0;
+		return -EINVAL;
+	}
+
+	/* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
+	*cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
+
+	return 0;
+}
+#endif
+
 static void __init hdmi_probe_pdata(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index 6aedb898a918..852a8033ddcc 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -190,6 +190,7 @@ void ti_hdmi_4xxx_pll_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts);
 int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data);
 int ti_hdmi_4xxx_audio_start(struct hdmi_ip_data *ip_data);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index b572101c1d03..6178bdac3842 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1202,63 +1202,6 @@ void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
 	 */
 }
 
-int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
-				u32 sample_freq, u32 *n, u32 *cts)
-{
-	u32 r;
-	u32 deep_color = 0;
-	u32 pclk = ip_data->cfg.timings.pixel_clock;
-
-	if (n == NULL || cts == NULL)
-		return -EINVAL;
-	/*
-	 * Obtain current deep color configuration. This needed
-	 * to calculate the TMDS clock based on the pixel clock.
-	 */
-	r = REG_GET(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, 1, 0);
-	switch (r) {
-	case 1: /* No deep color selected */
-		deep_color = 100;
-		break;
-	case 2: /* 10-bit deep color selected */
-		deep_color = 125;
-		break;
-	case 3: /* 12-bit deep color selected */
-		deep_color = 150;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (sample_freq) {
-	case 32000:
-		if ((deep_color == 125) && ((pclk == 54054)
-				|| (pclk == 74250)))
-			*n = 8192;
-		else
-			*n = 4096;
-		break;
-	case 44100:
-		*n = 6272;
-		break;
-	case 48000:
-		if ((deep_color == 125) && ((pclk == 54054)
-				|| (pclk == 74250)))
-			*n = 8192;
-		else
-			*n = 6144;
-		break;
-	default:
-		*n = 0;
-		return -EINVAL;
-	}
-
-	/* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
-	*cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
-
-	return 0;
-}
-
 int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data)
 {
 	REG_FLD_MOD(hdmi_wp_base(ip_data),
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index 4510edba4406..819d056c89d7 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -434,8 +434,6 @@ struct hdmi_core_audio_config {
 };
 
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
-int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
-				u32 sample_freq, u32 *n, u32 *cts);
 void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
 		struct snd_cea_861_aud_if *info_aud);
 void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
-- 
cgit v1.2.3


From 25a653597ee63119a477e9bdeb6b41bd7cd56140 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Fri, 23 Mar 2012 15:49:02 -0600
Subject: OMAPDSS: HDMI: Add support for more audio sample rates in N/CTS
 calculation

Add support for more sample rates when calculating N and CTS. This
covers all the audio sample rates that an HDMI source is allowed
to transmit according to the HDMI 1.4a specification.

Also, reorganize the logic for the calculation when using deep color.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 88 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 74 insertions(+), 14 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 0cdb11976091..09fdbf8714ea 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -558,6 +558,7 @@ static void hdmi_put_clocks(void)
 int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts)
 {
 	u32 deep_color;
+	bool deep_color_correct = false;
 	u32 pclk = hdmi.ip_data.cfg.timings.pixel_clock;
 
 	if (n == NULL || cts == NULL)
@@ -566,29 +567,88 @@ int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts)
 	/* TODO: When implemented, query deep color mode here. */
 	deep_color = 100;
 
+	/*
+	 * When using deep color, the default N value (as in the HDMI
+	 * specification) yields to an non-integer CTS. Hence, we
+	 * modify it while keeping the restrictions described in
+	 * section 7.2.1 of the HDMI 1.4a specification.
+	 */
 	switch (sample_freq) {
 	case 32000:
-		if ((deep_color == 125) && ((pclk == 54054) ||
-					    (pclk == 74250)))
-			*n = 8192;
-		else
-			*n = 4096;
+	case 48000:
+	case 96000:
+	case 192000:
+		if (deep_color == 125)
+			if (pclk == 27027 || pclk == 74250)
+				deep_color_correct = true;
+		if (deep_color == 150)
+			if (pclk == 27027)
+				deep_color_correct = true;
 		break;
 	case 44100:
-		*n = 6272;
-		break;
-	case 48000:
-		if ((deep_color == 125) && ((pclk == 54054) ||
-					    (pclk == 74250)))
-			*n = 8192;
-		else
-			*n = 6144;
+	case 88200:
+	case 176400:
+		if (deep_color == 125)
+			if (pclk == 27027)
+				deep_color_correct = true;
 		break;
 	default:
-		*n = 0;
 		return -EINVAL;
 	}
 
+	if (deep_color_correct) {
+		switch (sample_freq) {
+		case 32000:
+			*n = 8192;
+			break;
+		case 44100:
+			*n = 12544;
+			break;
+		case 48000:
+			*n = 8192;
+			break;
+		case 88200:
+			*n = 25088;
+			break;
+		case 96000:
+			*n = 16384;
+			break;
+		case 176400:
+			*n = 50176;
+			break;
+		case 192000:
+			*n = 32768;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (sample_freq) {
+		case 32000:
+			*n = 4096;
+			break;
+		case 44100:
+			*n = 6272;
+			break;
+		case 48000:
+			*n = 6144;
+			break;
+		case 88200:
+			*n = 12544;
+			break;
+		case 96000:
+			*n = 12288;
+			break;
+		case 176400:
+			*n = 25088;
+			break;
+		case 192000:
+			*n = 24576;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
 	/* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
 	*cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
 
-- 
cgit v1.2.3


From 6ec355d6c79e811a3b7f85ca6b22fa4bd7b1bbfc Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Wed, 21 Mar 2012 12:38:15 -0600
Subject: OMAPDSS: HDMI: Add an audio configuration function

The generic HDMI driver does not need to know about the specific
settings of a given IP. Hence, it just passes the audio configuration
and the IP library parses such configuration and sets the IP
accordingly. This patch introduces an IP-specific audio configuration
function.

Also, this patch implements the audio config function for OMAP4. The
DMA, format and core config functions are no longer exposed to the
generic HDMI driver as they are IP-specific.

The audio configuration function caters for 16-bit through 24-bit
audio samples with sample rates from 32kHz and up to 192kHz as well
as up to 8 audio channels.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/dss_features.c    |   1 +
 drivers/video/omap2/dss/ti_hdmi.h         |   5 +
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 189 +++++++++++++++++++++++++++++-
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h |  10 --
 4 files changed, 191 insertions(+), 14 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 1c939fb6debc..2627441731b1 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -578,6 +578,7 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
 	.audio_disable		=       ti_hdmi_4xxx_wp_audio_disable,
 	.audio_start		=       ti_hdmi_4xxx_audio_start,
 	.audio_stop		=       ti_hdmi_4xxx_audio_stop,
+	.audio_config		=	ti_hdmi_4xxx_audio_config,
 #endif
 
 };
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index 852a8033ddcc..e734cb444bc7 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -116,6 +116,9 @@ struct ti_hdmi_ip_ops {
 	int (*audio_start)(struct hdmi_ip_data *ip_data);
 
 	void (*audio_stop)(struct hdmi_ip_data *ip_data);
+
+	int (*audio_config)(struct hdmi_ip_data *ip_data,
+		struct omap_dss_audio *audio);
 #endif
 
 };
@@ -195,5 +198,7 @@ int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_wp_audio_disable(struct hdmi_ip_data *ip_data);
 int ti_hdmi_4xxx_audio_start(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_audio_stop(struct hdmi_ip_data *ip_data);
+int ti_hdmi_4xxx_audio_config(struct hdmi_ip_data *ip_data,
+		struct omap_dss_audio *audio);
 #endif
 #endif
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 6178bdac3842..1ce77f37ab50 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -31,10 +31,12 @@
 #include <linux/gpio.h>
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 #include <sound/asound.h>
+#include <sound/asoundef.h>
 #endif
 
 #include "ti_hdmi_4xxx_ip.h"
 #include "dss.h"
+#include "dss_features.h"
 
 static inline void hdmi_write_reg(void __iomem *base_addr,
 				const u16 idx, u32 val)
@@ -1024,7 +1026,7 @@ void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
 }
 
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
-void hdmi_wp_audio_config_format(struct hdmi_ip_data *ip_data,
+static void ti_hdmi_4xxx_wp_audio_config_format(struct hdmi_ip_data *ip_data,
 					struct hdmi_audio_format *aud_fmt)
 {
 	u32 r;
@@ -1043,7 +1045,7 @@ void hdmi_wp_audio_config_format(struct hdmi_ip_data *ip_data,
 	hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CFG, r);
 }
 
-void hdmi_wp_audio_config_dma(struct hdmi_ip_data *ip_data,
+static void ti_hdmi_4xxx_wp_audio_config_dma(struct hdmi_ip_data *ip_data,
 					struct hdmi_audio_dma *aud_dma)
 {
 	u32 r;
@@ -1061,7 +1063,7 @@ void hdmi_wp_audio_config_dma(struct hdmi_ip_data *ip_data,
 	hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CTRL, r);
 }
 
-void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
+static void ti_hdmi_4xxx_core_audio_config(struct hdmi_ip_data *ip_data,
 					struct hdmi_core_audio_config *cfg)
 {
 	u32 r;
@@ -1152,7 +1154,7 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_MODE, r);
 }
 
-void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
+static void ti_hdmi_4xxx_core_audio_infoframe_cfg(struct hdmi_ip_data *ip_data,
 		struct snd_cea_861_aud_if *info_aud)
 {
 	u8 sum = 0, checksum = 0;
@@ -1202,6 +1204,185 @@ void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
 	 */
 }
 
+int ti_hdmi_4xxx_audio_config(struct hdmi_ip_data *ip_data,
+		struct omap_dss_audio *audio)
+{
+	struct hdmi_audio_format audio_format;
+	struct hdmi_audio_dma audio_dma;
+	struct hdmi_core_audio_config core;
+	int err, n, cts, channel_count;
+	unsigned int fs_nr;
+	bool word_length_16b = false;
+
+	if (!audio || !audio->iec || !audio->cea || !ip_data)
+		return -EINVAL;
+
+	core.iec60958_cfg = audio->iec;
+	/*
+	 * In the IEC-60958 status word, check if the audio sample word length
+	 * is 16-bit as several optimizations can be performed in such case.
+	 */
+	if (!(audio->iec->status[4] & IEC958_AES4_CON_MAX_WORDLEN_24))
+		if (audio->iec->status[4] & IEC958_AES4_CON_WORDLEN_20_16)
+			word_length_16b = true;
+
+	/* I2S configuration. See Phillips' specification */
+	if (word_length_16b)
+		core.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_LEFT;
+	else
+		core.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
+	/*
+	 * The I2S input word length is twice the lenght given in the IEC-60958
+	 * status word. If the word size is greater than
+	 * 20 bits, increment by one.
+	 */
+	core.i2s_cfg.in_length_bits = audio->iec->status[4]
+		& IEC958_AES4_CON_WORDLEN;
+	if (audio->iec->status[4] & IEC958_AES4_CON_MAX_WORDLEN_24)
+		core.i2s_cfg.in_length_bits++;
+	core.i2s_cfg.sck_edge_mode = HDMI_AUDIO_I2S_SCK_EDGE_RISING;
+	core.i2s_cfg.vbit = HDMI_AUDIO_I2S_VBIT_FOR_PCM;
+	core.i2s_cfg.direction = HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST;
+	core.i2s_cfg.shift = HDMI_AUDIO_I2S_FIRST_BIT_SHIFT;
+
+	/* convert sample frequency to a number */
+	switch (audio->iec->status[3] & IEC958_AES3_CON_FS) {
+	case IEC958_AES3_CON_FS_32000:
+		fs_nr = 32000;
+		break;
+	case IEC958_AES3_CON_FS_44100:
+		fs_nr = 44100;
+		break;
+	case IEC958_AES3_CON_FS_48000:
+		fs_nr = 48000;
+		break;
+	case IEC958_AES3_CON_FS_88200:
+		fs_nr = 88200;
+		break;
+	case IEC958_AES3_CON_FS_96000:
+		fs_nr = 96000;
+		break;
+	case IEC958_AES3_CON_FS_176400:
+		fs_nr = 176400;
+		break;
+	case IEC958_AES3_CON_FS_192000:
+		fs_nr = 192000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = hdmi_compute_acr(fs_nr, &n, &cts);
+
+	/* Audio clock regeneration settings */
+	core.n = n;
+	core.cts = cts;
+	if (dss_has_feature(FEAT_HDMI_CTS_SWMODE)) {
+		core.aud_par_busclk = 0;
+		core.cts_mode = HDMI_AUDIO_CTS_MODE_SW;
+		core.use_mclk = dss_has_feature(FEAT_HDMI_AUDIO_USE_MCLK);
+	} else {
+		core.aud_par_busclk = (((128 * 31) - 1) << 8);
+		core.cts_mode = HDMI_AUDIO_CTS_MODE_HW;
+		core.use_mclk = true;
+	}
+
+	if (core.use_mclk)
+		core.mclk_mode = HDMI_AUDIO_MCLK_128FS;
+
+	/* Audio channels settings */
+	channel_count = (audio->cea->db1_ct_cc &
+			 CEA861_AUDIO_INFOFRAME_DB1CC) + 1;
+
+	switch (channel_count) {
+	case 2:
+		audio_format.active_chnnls_msk = 0x03;
+		break;
+	case 3:
+		audio_format.active_chnnls_msk = 0x07;
+		break;
+	case 4:
+		audio_format.active_chnnls_msk = 0x0f;
+		break;
+	case 5:
+		audio_format.active_chnnls_msk = 0x1f;
+		break;
+	case 6:
+		audio_format.active_chnnls_msk = 0x3f;
+		break;
+	case 7:
+		audio_format.active_chnnls_msk = 0x7f;
+		break;
+	case 8:
+		audio_format.active_chnnls_msk = 0xff;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * the HDMI IP needs to enable four stereo channels when transmitting
+	 * more than 2 audio channels
+	 */
+	if (channel_count == 2) {
+		audio_format.stereo_channels = HDMI_AUDIO_STEREO_ONECHANNEL;
+		core.i2s_cfg.active_sds = HDMI_AUDIO_I2S_SD0_EN;
+		core.layout = HDMI_AUDIO_LAYOUT_2CH;
+	} else {
+		audio_format.stereo_channels = HDMI_AUDIO_STEREO_FOURCHANNELS;
+		core.i2s_cfg.active_sds = HDMI_AUDIO_I2S_SD0_EN |
+				HDMI_AUDIO_I2S_SD1_EN | HDMI_AUDIO_I2S_SD2_EN |
+				HDMI_AUDIO_I2S_SD3_EN;
+		core.layout = HDMI_AUDIO_LAYOUT_8CH;
+	}
+
+	core.en_spdif = false;
+	/* use sample frequency from channel status word */
+	core.fs_override = true;
+	/* enable ACR packets */
+	core.en_acr_pkt = true;
+	/* disable direct streaming digital audio */
+	core.en_dsd_audio = false;
+	/* use parallel audio interface */
+	core.en_parallel_aud_input = true;
+
+	/* DMA settings */
+	if (word_length_16b)
+		audio_dma.transfer_size = 0x10;
+	else
+		audio_dma.transfer_size = 0x20;
+	audio_dma.block_size = 0xC0;
+	audio_dma.mode = HDMI_AUDIO_TRANSF_DMA;
+	audio_dma.fifo_threshold = 0x20; /* in number of samples */
+
+	/* audio FIFO format settings */
+	if (word_length_16b) {
+		audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_TWOSAMPLES;
+		audio_format.sample_size = HDMI_AUDIO_SAMPLE_16BITS;
+		audio_format.justification = HDMI_AUDIO_JUSTIFY_LEFT;
+	} else {
+		audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_ONESAMPLE;
+		audio_format.sample_size = HDMI_AUDIO_SAMPLE_24BITS;
+		audio_format.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
+	}
+	audio_format.type = HDMI_AUDIO_TYPE_LPCM;
+	audio_format.sample_order = HDMI_AUDIO_SAMPLE_LEFT_FIRST;
+	/* disable start/stop signals of IEC 60958 blocks */
+	audio_format.en_sig_blk_strt_end = HDMI_AUDIO_BLOCK_SIG_STARTEND_ON;
+
+	/* configure DMA and audio FIFO format*/
+	ti_hdmi_4xxx_wp_audio_config_dma(ip_data, &audio_dma);
+	ti_hdmi_4xxx_wp_audio_config_format(ip_data, &audio_format);
+
+	/* configure the core*/
+	ti_hdmi_4xxx_core_audio_config(ip_data, &core);
+
+	/* configure CEA 861 audio infoframe*/
+	ti_hdmi_4xxx_core_audio_infoframe_cfg(ip_data, audio->cea);
+
+	return 0;
+}
+
 int ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data)
 {
 	REG_FLD_MOD(hdmi_wp_base(ip_data),
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index 819d056c89d7..8366ae19e82e 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -433,14 +433,4 @@ struct hdmi_core_audio_config {
 	bool					en_spdif;
 };
 
-#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
-void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
-		struct snd_cea_861_aud_if *info_aud);
-void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
-					struct hdmi_core_audio_config *cfg);
-void hdmi_wp_audio_config_dma(struct hdmi_ip_data *ip_data,
-					struct hdmi_audio_dma *aud_dma);
-void hdmi_wp_audio_config_format(struct hdmi_ip_data *ip_data,
-					struct hdmi_audio_format *aud_fmt);
-#endif
 #endif
-- 
cgit v1.2.3


From 24ccfc5541b11f1e6ffcf10f5ce94370440d6c75 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Thu, 3 May 2012 12:27:12 -0500
Subject: OMAPDSS: HDMI: OMAP4: Remap speaker order to match ALSA order

As of today, the only know user of the DSS HDMI audio support is
ASoC. Hence, it makes sense to remap the speaker order to match
the ALSA speaker order. In the future, a dynamic mapping mechanism
may be implemented.

Remapping is needed as the HDMI speaker order is FL/FR/LFE/C/RL/RR/
RLC-FLC/RRC-FLC while the ALSA order is FL/FR/RL/RR/C/LFE/SL/SR.
Refer to CEA-861 Section 6.6.2 for further details.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 1ce77f37ab50..667c960e10b9 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1152,6 +1152,14 @@ static void ti_hdmi_4xxx_core_audio_config(struct hdmi_ip_data *ip_data,
 	r = FLD_MOD(r, cfg->en_parallel_aud_input, 2, 2);
 	r = FLD_MOD(r, cfg->en_spdif, 1, 1);
 	hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_MODE, r);
+
+	/* Audio channel mappings */
+	/* TODO: Make channel mapping dynamic. For now, map channels
+	 * in the ALSA order: FL/FR/RL/RR/C/LFE/SL/SR. Remapping is needed as
+	 * HDMI speaker order is different. See CEA-861 Section 6.6.2.
+	 */
+	hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_IN_MAP, 0x78);
+	REG_FLD_MOD(av_base, HDMI_CORE_AV_SWAP_I2S, 1, 5, 5);
 }
 
 static void ti_hdmi_4xxx_core_audio_infoframe_cfg(struct hdmi_ip_data *ip_data,
-- 
cgit v1.2.3


From b7dea05aec8b6421500929d5003866655d6d9dab Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Wed, 25 Apr 2012 19:29:06 -0500
Subject: OMAPDSS: HDMI: Panel: Simplify the name of the HDMI mutex

As the hdmi_lock mutex is inside the hdmi struct, rename to simply
"lock". This is only a change in the name. There are not changes
in functionality.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/hdmi_panel.c | 41 ++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 20 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi_panel.c b/drivers/video/omap2/dss/hdmi_panel.c
index 533d5dc634d2..5e215d6e8d0a 100644
--- a/drivers/video/omap2/dss/hdmi_panel.c
+++ b/drivers/video/omap2/dss/hdmi_panel.c
@@ -30,7 +30,8 @@
 #include "dss.h"
 
 static struct {
-	struct mutex hdmi_lock;
+	/* This protects the panel ops, mainly when accessing the HDMI IP. */
+	struct mutex lock;
 } hdmi;
 
 
@@ -59,7 +60,7 @@ static int hdmi_panel_enable(struct omap_dss_device *dssdev)
 	int r = 0;
 	DSSDBG("ENTER hdmi_panel_enable\n");
 
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
 		r = -EINVAL;
@@ -75,28 +76,28 @@ static int hdmi_panel_enable(struct omap_dss_device *dssdev)
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 err:
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 
 	return r;
 }
 
 static void hdmi_panel_disable(struct omap_dss_device *dssdev)
 {
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		omapdss_hdmi_display_disable(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 }
 
 static int hdmi_panel_suspend(struct omap_dss_device *dssdev)
 {
 	int r = 0;
 
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
 		r = -EINVAL;
@@ -108,7 +109,7 @@ static int hdmi_panel_suspend(struct omap_dss_device *dssdev)
 	omapdss_hdmi_display_disable(dssdev);
 
 err:
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 
 	return r;
 }
@@ -117,7 +118,7 @@ static int hdmi_panel_resume(struct omap_dss_device *dssdev)
 {
 	int r = 0;
 
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
 		r = -EINVAL;
@@ -133,7 +134,7 @@ static int hdmi_panel_resume(struct omap_dss_device *dssdev)
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 err:
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 
 	return r;
 }
@@ -141,11 +142,11 @@ err:
 static void hdmi_get_timings(struct omap_dss_device *dssdev,
 			struct omap_video_timings *timings)
 {
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	*timings = dssdev->panel.timings;
 
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 }
 
 static void hdmi_set_timings(struct omap_dss_device *dssdev,
@@ -153,12 +154,12 @@ static void hdmi_set_timings(struct omap_dss_device *dssdev,
 {
 	DSSDBG("hdmi_set_timings\n");
 
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	dssdev->panel.timings = *timings;
 	omapdss_hdmi_display_set_timing(dssdev);
 
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 }
 
 static int hdmi_check_timings(struct omap_dss_device *dssdev,
@@ -168,11 +169,11 @@ static int hdmi_check_timings(struct omap_dss_device *dssdev,
 
 	DSSDBG("hdmi_check_timings\n");
 
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	r = omapdss_hdmi_display_check_timing(dssdev, timings);
 
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 	return r;
 }
 
@@ -180,7 +181,7 @@ static int hdmi_read_edid(struct omap_dss_device *dssdev, u8 *buf, int len)
 {
 	int r;
 
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
 		r = omapdss_hdmi_display_enable(dssdev);
@@ -194,7 +195,7 @@ static int hdmi_read_edid(struct omap_dss_device *dssdev, u8 *buf, int len)
 			dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
 		omapdss_hdmi_display_disable(dssdev);
 err:
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 
 	return r;
 }
@@ -203,7 +204,7 @@ static bool hdmi_detect(struct omap_dss_device *dssdev)
 {
 	int r;
 
-	mutex_lock(&hdmi.hdmi_lock);
+	mutex_lock(&hdmi.lock);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
 		r = omapdss_hdmi_display_enable(dssdev);
@@ -217,7 +218,7 @@ static bool hdmi_detect(struct omap_dss_device *dssdev)
 			dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
 		omapdss_hdmi_display_disable(dssdev);
 err:
-	mutex_unlock(&hdmi.hdmi_lock);
+	mutex_unlock(&hdmi.lock);
 
 	return r;
 }
@@ -242,7 +243,7 @@ static struct omap_dss_driver hdmi_driver = {
 
 int hdmi_panel_init(void)
 {
-	mutex_init(&hdmi.hdmi_lock);
+	mutex_init(&hdmi.lock);
 
 	omap_dss_register_driver(&hdmi_driver);
 
-- 
cgit v1.2.3


From f3a97491f2c54e5239663f8f147b34c280cf7db5 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Wed, 9 May 2012 21:09:50 -0500
Subject: OMAPDSS: HDMI: Implement DSS driver interface for audio

Implement the DSS device driver audio support interface in the HDMI
panel driver and generic driver. The implementation relies on the
IP-specific functions that are defined at DSS probe time.

A mixed locking strategy is used. The panel's mutex is used when
the state of the panel is queried as required by the audio functions.
The audio state is protected using a spinlock as users of DSS HDMI
audio functionality might start/stop audio while holding a spinlock.
The mutex and the spinlock are held and released as needed by each
individual function to protect the panel state and the audio state.

Although the panel's audio_start functions does not check whether
the panel is active, the audio _ENABLED state can be reached only
from audio_enable, which does check the state of the panel. Also,
if the panel is ever disabled, the audio state will transition
to _DISABLED. Transitions are always protected by the audio lock.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
---
 drivers/video/omap2/dss/dss.h        |   8 ++
 drivers/video/omap2/dss/hdmi.c       |  42 ++++++++
 drivers/video/omap2/dss/hdmi_panel.c | 193 ++++++++++++++++++++++++++++++++++-
 3 files changed, 241 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d5cb19fe7e8b..4aa9529a4768 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -464,6 +464,14 @@ int omapdss_hdmi_read_edid(u8 *buf, int len);
 bool omapdss_hdmi_detect(void);
 int hdmi_panel_init(void);
 void hdmi_panel_exit(void);
+#ifdef CONFIG_OMAP4_DSS_HDMI_AUDIO
+int hdmi_audio_enable(void);
+void hdmi_audio_disable(void);
+int hdmi_audio_start(void);
+void hdmi_audio_stop(void);
+bool hdmi_mode_has_audio(void);
+int hdmi_audio_config(struct omap_dss_audio *audio);
+#endif
 
 /* RFBI */
 int rfbi_init_platform_driver(void) __init;
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 09fdbf8714ea..8195c7166d20 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -654,6 +654,48 @@ int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts)
 
 	return 0;
 }
+
+int hdmi_audio_enable(void)
+{
+	DSSDBG("audio_enable\n");
+
+	return hdmi.ip_data.ops->audio_enable(&hdmi.ip_data);
+}
+
+void hdmi_audio_disable(void)
+{
+	DSSDBG("audio_disable\n");
+
+	hdmi.ip_data.ops->audio_disable(&hdmi.ip_data);
+}
+
+int hdmi_audio_start(void)
+{
+	DSSDBG("audio_start\n");
+
+	return hdmi.ip_data.ops->audio_start(&hdmi.ip_data);
+}
+
+void hdmi_audio_stop(void)
+{
+	DSSDBG("audio_stop\n");
+
+	hdmi.ip_data.ops->audio_stop(&hdmi.ip_data);
+}
+
+bool hdmi_mode_has_audio(void)
+{
+	if (hdmi.ip_data.cfg.cm.mode == HDMI_HDMI)
+		return true;
+	else
+		return false;
+}
+
+int hdmi_audio_config(struct omap_dss_audio *audio)
+{
+	return hdmi.ip_data.ops->audio_config(&hdmi.ip_data, audio);
+}
+
 #endif
 
 static void __init hdmi_probe_pdata(struct platform_device *pdev)
diff --git a/drivers/video/omap2/dss/hdmi_panel.c b/drivers/video/omap2/dss/hdmi_panel.c
index 5e215d6e8d0a..1179e3c4b1c7 100644
--- a/drivers/video/omap2/dss/hdmi_panel.c
+++ b/drivers/video/omap2/dss/hdmi_panel.c
@@ -32,6 +32,10 @@
 static struct {
 	/* This protects the panel ops, mainly when accessing the HDMI IP. */
 	struct mutex lock;
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+	/* This protects the audio ops, specifically. */
+	spinlock_t audio_lock;
+#endif
 } hdmi;
 
 
@@ -55,6 +59,162 @@ static void hdmi_panel_remove(struct omap_dss_device *dssdev)
 
 }
 
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+static int hdmi_panel_audio_enable(struct omap_dss_device *dssdev)
+{
+	unsigned long flags;
+	int r;
+
+	mutex_lock(&hdmi.lock);
+	spin_lock_irqsave(&hdmi.audio_lock, flags);
+
+	/* enable audio only if the display is active and supports audio */
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE ||
+	    !hdmi_mode_has_audio()) {
+		DSSERR("audio not supported or display is off\n");
+		r = -EPERM;
+		goto err;
+	}
+
+	r = hdmi_audio_enable();
+
+	if (!r)
+		dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
+
+err:
+	spin_unlock_irqrestore(&hdmi.audio_lock, flags);
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+
+static void hdmi_panel_audio_disable(struct omap_dss_device *dssdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hdmi.audio_lock, flags);
+
+	hdmi_audio_disable();
+
+	dssdev->audio_state = OMAP_DSS_AUDIO_DISABLED;
+
+	spin_unlock_irqrestore(&hdmi.audio_lock, flags);
+}
+
+static int hdmi_panel_audio_start(struct omap_dss_device *dssdev)
+{
+	unsigned long flags;
+	int r;
+
+	spin_lock_irqsave(&hdmi.audio_lock, flags);
+	/*
+	 * No need to check the panel state. It was checked when trasitioning
+	 * to AUDIO_ENABLED.
+	 */
+	if (dssdev->audio_state != OMAP_DSS_AUDIO_ENABLED) {
+		DSSERR("audio start from invalid state\n");
+		r = -EPERM;
+		goto err;
+	}
+
+	r = hdmi_audio_start();
+
+	if (!r)
+		dssdev->audio_state = OMAP_DSS_AUDIO_PLAYING;
+
+err:
+	spin_unlock_irqrestore(&hdmi.audio_lock, flags);
+	return r;
+}
+
+static void hdmi_panel_audio_stop(struct omap_dss_device *dssdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hdmi.audio_lock, flags);
+
+	hdmi_audio_stop();
+	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
+
+	spin_unlock_irqrestore(&hdmi.audio_lock, flags);
+}
+
+static bool hdmi_panel_audio_supported(struct omap_dss_device *dssdev)
+{
+	bool r = false;
+
+	mutex_lock(&hdmi.lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		goto err;
+
+	if (!hdmi_mode_has_audio())
+		goto err;
+
+	r = true;
+err:
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+
+static int hdmi_panel_audio_config(struct omap_dss_device *dssdev,
+		struct omap_dss_audio *audio)
+{
+	unsigned long flags;
+	int r;
+
+	mutex_lock(&hdmi.lock);
+	spin_lock_irqsave(&hdmi.audio_lock, flags);
+
+	/* config audio only if the display is active and supports audio */
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE ||
+	    !hdmi_mode_has_audio()) {
+		DSSERR("audio not supported or display is off\n");
+		r = -EPERM;
+		goto err;
+	}
+
+	r = hdmi_audio_config(audio);
+
+	if (!r)
+		dssdev->audio_state = OMAP_DSS_AUDIO_CONFIGURED;
+
+err:
+	spin_unlock_irqrestore(&hdmi.audio_lock, flags);
+	mutex_unlock(&hdmi.lock);
+	return r;
+}
+
+#else
+static int hdmi_panel_audio_enable(struct omap_dss_device *dssdev)
+{
+	return -EPERM;
+}
+
+static void hdmi_panel_audio_disable(struct omap_dss_device *dssdev)
+{
+}
+
+static int hdmi_panel_audio_start(struct omap_dss_device *dssdev)
+{
+	return -EPERM;
+}
+
+static void hdmi_panel_audio_stop(struct omap_dss_device *dssdev)
+{
+}
+
+static bool hdmi_panel_audio_supported(struct omap_dss_device *dssdev)
+{
+	return false;
+}
+
+static int hdmi_panel_audio_config(struct omap_dss_device *dssdev,
+		struct omap_dss_audio *audio)
+{
+	return -EPERM;
+}
+#endif
+
 static int hdmi_panel_enable(struct omap_dss_device *dssdev)
 {
 	int r = 0;
@@ -85,8 +245,15 @@ static void hdmi_panel_disable(struct omap_dss_device *dssdev)
 {
 	mutex_lock(&hdmi.lock);
 
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		/*
+		 * TODO: notify audio users that the display was disabled. For
+		 * now, disable audio locally to not break our audio state
+		 * machine.
+		 */
+		hdmi_panel_audio_disable(dssdev);
 		omapdss_hdmi_display_disable(dssdev);
+	}
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 
@@ -104,8 +271,13 @@ static int hdmi_panel_suspend(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	/*
+	 * TODO: notify audio users that the display was suspended. For now,
+	 * disable audio locally to not break our audio state machine.
+	 */
+	hdmi_panel_audio_disable(dssdev);
 
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 	omapdss_hdmi_display_disable(dssdev);
 
 err:
@@ -130,6 +302,7 @@ static int hdmi_panel_resume(struct omap_dss_device *dssdev)
 		DSSERR("failed to power on\n");
 		goto err;
 	}
+	/* TODO: notify audio users that the panel resumed. */
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -156,6 +329,12 @@ static void hdmi_set_timings(struct omap_dss_device *dssdev,
 
 	mutex_lock(&hdmi.lock);
 
+	/*
+	 * TODO: notify audio users that there was a timings change. For
+	 * now, disable audio locally to not break our audio state machine.
+	 */
+	hdmi_panel_audio_disable(dssdev);
+
 	dssdev->panel.timings = *timings;
 	omapdss_hdmi_display_set_timing(dssdev);
 
@@ -235,6 +414,12 @@ static struct omap_dss_driver hdmi_driver = {
 	.check_timings	= hdmi_check_timings,
 	.read_edid	= hdmi_read_edid,
 	.detect		= hdmi_detect,
+	.audio_enable	= hdmi_panel_audio_enable,
+	.audio_disable	= hdmi_panel_audio_disable,
+	.audio_start	= hdmi_panel_audio_start,
+	.audio_stop	= hdmi_panel_audio_stop,
+	.audio_supported	= hdmi_panel_audio_supported,
+	.audio_config	= hdmi_panel_audio_config,
 	.driver			= {
 		.name   = "hdmi_panel",
 		.owner  = THIS_MODULE,
@@ -245,6 +430,10 @@ int hdmi_panel_init(void)
 {
 	mutex_init(&hdmi.lock);
 
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+	spin_lock_init(&hdmi.audio_lock);
+#endif
+
 	omap_dss_register_driver(&hdmi_driver);
 
 	return 0;
-- 
cgit v1.2.3


From 05dd0f5308213e169b02458a7f3a61362e581e14 Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Tue, 15 May 2012 12:22:34 +0530
Subject: OMAPDSS: DISPC: Update Accumulator configuration for chroma plane

DISPC has two accumulator registers DISPC_VIDp_ACCU_0 and DISPC_VIDp_ACCU_1 each
with horizontal and vertical bit fields. The bit fields can take values in the
range of -1024 to 1023. Based on bit field values DISPC decides on which one out
of 8 phases the filtering starts. DISPC_VIDp_ACCU_0 is used for progressive
output and for interlaced output both DISPC_VIDp_ACCU_0 and DISPC_VIDp_ACCU_1
are used.

The current accumulator values in DISPC scaling logic for chroma plane takes
default values for all color modes and rotation types. So, the horizontal and
vertical up and downsampling accumulator bit field values have been updated for
better performance.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 92 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 89 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b509ca661e35..b81fafac35b8 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1153,6 +1153,92 @@ static void dispc_ovl_set_scale_param(enum omap_plane plane,
 	dispc_ovl_set_fir(plane, fir_hinc, fir_vinc, color_comp);
 }
 
+static void dispc_ovl_set_accu_uv(enum omap_plane plane,
+		u16 orig_width,	u16 orig_height, u16 out_width, u16 out_height,
+		bool ilace, enum omap_color_mode color_mode, u8 rotation)
+{
+	int h_accu2_0, h_accu2_1;
+	int v_accu2_0, v_accu2_1;
+	int chroma_hinc, chroma_vinc;
+	int idx;
+
+	struct accu {
+		s8 h0_m, h0_n;
+		s8 h1_m, h1_n;
+		s8 v0_m, v0_n;
+		s8 v1_m, v1_n;
+	};
+
+	const struct accu *accu_table;
+	const struct accu *accu_val;
+
+	static const struct accu accu_nv12[4] = {
+		{  0, 1,  0, 1 , -1, 2, 0, 1 },
+		{  1, 2, -3, 4 ,  0, 1, 0, 1 },
+		{ -1, 1,  0, 1 , -1, 2, 0, 1 },
+		{ -1, 2, -1, 2 , -1, 1, 0, 1 },
+	};
+
+	static const struct accu accu_nv12_ilace[4] = {
+		{  0, 1,  0, 1 , -3, 4, -1, 4 },
+		{ -1, 4, -3, 4 ,  0, 1,  0, 1 },
+		{ -1, 1,  0, 1 , -1, 4, -3, 4 },
+		{ -3, 4, -3, 4 , -1, 1,  0, 1 },
+	};
+
+	static const struct accu accu_yuv[4] = {
+		{  0, 1, 0, 1,  0, 1, 0, 1 },
+		{  0, 1, 0, 1,  0, 1, 0, 1 },
+		{ -1, 1, 0, 1,  0, 1, 0, 1 },
+		{  0, 1, 0, 1, -1, 1, 0, 1 },
+	};
+
+	switch (rotation) {
+	case OMAP_DSS_ROT_0:
+		idx = 0;
+		break;
+	case OMAP_DSS_ROT_90:
+		idx = 1;
+		break;
+	case OMAP_DSS_ROT_180:
+		idx = 2;
+		break;
+	case OMAP_DSS_ROT_270:
+		idx = 3;
+		break;
+	default:
+		BUG();
+	}
+
+	switch (color_mode) {
+	case OMAP_DSS_COLOR_NV12:
+		if (ilace)
+			accu_table = accu_nv12_ilace;
+		else
+			accu_table = accu_nv12;
+		break;
+	case OMAP_DSS_COLOR_YUV2:
+	case OMAP_DSS_COLOR_UYVY:
+		accu_table = accu_yuv;
+		break;
+	default:
+		BUG();
+	}
+
+	accu_val = &accu_table[idx];
+
+	chroma_hinc = 1024 * orig_width / out_width;
+	chroma_vinc = 1024 * orig_height / out_height;
+
+	h_accu2_0 = (accu_val->h0_m * chroma_hinc / accu_val->h0_n) % 1024;
+	h_accu2_1 = (accu_val->h1_m * chroma_hinc / accu_val->h1_n) % 1024;
+	v_accu2_0 = (accu_val->v0_m * chroma_vinc / accu_val->v0_n) % 1024;
+	v_accu2_1 = (accu_val->v1_m * chroma_vinc / accu_val->v1_n) % 1024;
+
+	dispc_ovl_set_vid_accu2_0(plane, h_accu2_0, v_accu2_0);
+	dispc_ovl_set_vid_accu2_1(plane, h_accu2_1, v_accu2_1);
+}
+
 static void dispc_ovl_set_scaling_common(enum omap_plane plane,
 		u16 orig_width, u16 orig_height,
 		u16 out_width, u16 out_height,
@@ -1217,6 +1303,9 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 	int scale_x = out_width != orig_width;
 	int scale_y = out_height != orig_height;
 
+	dispc_ovl_set_accu_uv(plane, orig_width, orig_height, out_width,
+			out_height, ilace, color_mode, rotation);
+
 	if (!dss_has_feature(FEAT_HANDLE_UV_SEPARATE))
 		return;
 	if ((color_mode != OMAP_DSS_COLOR_YUV2 &&
@@ -1265,9 +1354,6 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), scale_x ? 1 : 0, 5, 5);
 	/* set V scaling */
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), scale_y ? 1 : 0, 6, 6);
-
-	dispc_ovl_set_vid_accu2_0(plane, 0x80, 0);
-	dispc_ovl_set_vid_accu2_1(plane, 0x80, 0);
 }
 
 static void dispc_ovl_set_scaling(enum omap_plane plane,
-- 
cgit v1.2.3


From 6f28c2964b535f9439d52c437aa2fbfef7ed149c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 15 May 2012 11:32:18 +0530
Subject: OMAPDSS: DSI: Support command mode interleaving during video mode
 blanking periods

DSI supports interleaving of command mode packets during the HSA, HFP, HBP and
BLLP blanking intervals in a video mode stream. This is useful as a user may
want to read or change the configuration of a panel without stopping the video
stream.

On OMAP DSI, we can queue HS or LP command mode packets in the TX FIFO, and
the DSI HW takes care of interleaving this data during the one of the blanking
intervals. The DSI HW needs to be programmed with the maximum amount of data
that can be interleaved in a particular blanking period. A blanking period
cannot be used to send command mode data for it's complete duration, there is
some amount of time required for the DSI data and clock lanes to transition
to the desired LP or HS state.

Based on the state of the lanes at the beginning and end of the blanking period,
we have different scenarios, with each scenario having a different value of time
required to transition to HS or LP. Refer to the section 'Interleaving Mode' in
OMAP TRM for more info on the scenarios and the equations to calculate the time
required for HS or LP transitions.

We use the scenarios which takes the maximum time for HS or LP transition, this
gives us the minimum amount of time that can be used to interleave command mode
data. The amount of data that can be sent during this minimum time is calculated
for command mode packets both in LP and HS. These are written to the registers
DSI_VM_TIMING4 to DSI_VM_TIMING6.

The calculations don't take into account the time required of transmitting BTA
when doing a DSI read, or verifying if a DSI write went through correctly. Until
these latencies aren't considered, the behaviour of DSI is unpredictable when
a BTA is interleaved during a blanking period. Enhancement of these calculations
is a TODO item.

The calculations are derived from DSI parameter calculation tools written by
Sebastien Fagard <s-fagard@ti.com>

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 181 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 181 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index e2aaf5a167fa..f2d835fc4dc3 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -3665,6 +3665,186 @@ static void dsi_config_blanking_modes(struct omap_dss_device *dssdev)
 	dsi_write_reg(dsidev, DSI_CTRL, r);
 }
 
+/*
+ * According to section 'HS Command Mode Interleaving' in OMAP TRM, Scenario 3
+ * results in maximum transition time for data and clock lanes to enter and
+ * exit HS mode. Hence, this is the scenario where the least amount of command
+ * mode data can be interleaved. We program the minimum amount of TXBYTECLKHS
+ * clock cycles that can be used to interleave command mode data in HS so that
+ * all scenarios are satisfied.
+ */
+static int dsi_compute_interleave_hs(int blank, bool ddr_alwon, int enter_hs,
+		int exit_hs, int exiths_clk, int ddr_pre, int ddr_post)
+{
+	int transition;
+
+	/*
+	 * If DDR_CLK_ALWAYS_ON is set, we need to consider HS mode transition
+	 * time of data lanes only, if it isn't set, we need to consider HS
+	 * transition time of both data and clock lanes. HS transition time
+	 * of Scenario 3 is considered.
+	 */
+	if (ddr_alwon) {
+		transition = enter_hs + exit_hs + max(enter_hs, 2) + 1;
+	} else {
+		int trans1, trans2;
+		trans1 = ddr_pre + enter_hs + exit_hs + max(enter_hs, 2) + 1;
+		trans2 = ddr_pre + enter_hs + exiths_clk + ddr_post + ddr_pre +
+				enter_hs + 1;
+		transition = max(trans1, trans2);
+	}
+
+	return blank > transition ? blank - transition : 0;
+}
+
+/*
+ * According to section 'LP Command Mode Interleaving' in OMAP TRM, Scenario 1
+ * results in maximum transition time for data lanes to enter and exit LP mode.
+ * Hence, this is the scenario where the least amount of command mode data can
+ * be interleaved. We program the minimum amount of bytes that can be
+ * interleaved in LP so that all scenarios are satisfied.
+ */
+static int dsi_compute_interleave_lp(int blank, int enter_hs, int exit_hs,
+		int lp_clk_div, int tdsi_fclk)
+{
+	int trans_lp;	/* time required for a LP transition, in TXBYTECLKHS */
+	int tlp_avail;	/* time left for interleaving commands, in CLKIN4DDR */
+	int ttxclkesc;	/* period of LP transmit escape clock, in CLKIN4DDR */
+	int thsbyte_clk = 16;	/* Period of TXBYTECLKHS clock, in CLKIN4DDR */
+	int lp_inter;	/* cmd mode data that can be interleaved, in bytes */
+
+	/* maximum LP transition time according to Scenario 1 */
+	trans_lp = exit_hs + max(enter_hs, 2) + 1;
+
+	/* CLKIN4DDR = 16 * TXBYTECLKHS */
+	tlp_avail = thsbyte_clk * (blank - trans_lp);
+
+	ttxclkesc = tdsi_fclk / lp_clk_div;
+
+	lp_inter = ((tlp_avail - 8 * thsbyte_clk - 5 * tdsi_fclk) / ttxclkesc -
+			26) / 16;
+
+	return max(lp_inter, 0);
+}
+
+static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	int blanking_mode;
+	int hfp_blanking_mode, hbp_blanking_mode, hsa_blanking_mode;
+	int hsa, hfp, hbp, width_bytes, bllp, lp_clk_div;
+	int ddr_clk_pre, ddr_clk_post, enter_hs_mode_lat, exit_hs_mode_lat;
+	int tclk_trail, ths_exit, exiths_clk;
+	bool ddr_alwon;
+	struct omap_video_timings *timings = &dssdev->panel.timings;
+	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+	int ndl = dsi->num_lanes_used - 1;
+	int dsi_fclk_hsdiv = dssdev->clocks.dsi.regm_dsi + 1;
+	int hsa_interleave_hs = 0, hsa_interleave_lp = 0;
+	int hfp_interleave_hs = 0, hfp_interleave_lp = 0;
+	int hbp_interleave_hs = 0, hbp_interleave_lp = 0;
+	int bl_interleave_hs = 0, bl_interleave_lp = 0;
+	u32 r;
+
+	r = dsi_read_reg(dsidev, DSI_CTRL);
+	blanking_mode = FLD_GET(r, 20, 20);
+	hfp_blanking_mode = FLD_GET(r, 21, 21);
+	hbp_blanking_mode = FLD_GET(r, 22, 22);
+	hsa_blanking_mode = FLD_GET(r, 23, 23);
+
+	r = dsi_read_reg(dsidev, DSI_VM_TIMING1);
+	hbp = FLD_GET(r, 11, 0);
+	hfp = FLD_GET(r, 23, 12);
+	hsa = FLD_GET(r, 31, 24);
+
+	r = dsi_read_reg(dsidev, DSI_CLK_TIMING);
+	ddr_clk_post = FLD_GET(r, 7, 0);
+	ddr_clk_pre = FLD_GET(r, 15, 8);
+
+	r = dsi_read_reg(dsidev, DSI_VM_TIMING7);
+	exit_hs_mode_lat = FLD_GET(r, 15, 0);
+	enter_hs_mode_lat = FLD_GET(r, 31, 16);
+
+	r = dsi_read_reg(dsidev, DSI_CLK_CTRL);
+	lp_clk_div = FLD_GET(r, 12, 0);
+	ddr_alwon = FLD_GET(r, 13, 13);
+
+	r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG0);
+	ths_exit = FLD_GET(r, 7, 0);
+
+	r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG1);
+	tclk_trail = FLD_GET(r, 15, 8);
+
+	exiths_clk = ths_exit + tclk_trail;
+
+	width_bytes = DIV_ROUND_UP(timings->x_res * bpp, 8);
+	bllp = hbp + hfp + hsa + DIV_ROUND_UP(width_bytes + 6, ndl);
+
+	if (!hsa_blanking_mode) {
+		hsa_interleave_hs = dsi_compute_interleave_hs(hsa, ddr_alwon,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					exiths_clk, ddr_clk_pre, ddr_clk_post);
+		hsa_interleave_lp = dsi_compute_interleave_lp(hsa,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					lp_clk_div, dsi_fclk_hsdiv);
+	}
+
+	if (!hfp_blanking_mode) {
+		hfp_interleave_hs = dsi_compute_interleave_hs(hfp, ddr_alwon,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					exiths_clk, ddr_clk_pre, ddr_clk_post);
+		hfp_interleave_lp = dsi_compute_interleave_lp(hfp,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					lp_clk_div, dsi_fclk_hsdiv);
+	}
+
+	if (!hbp_blanking_mode) {
+		hbp_interleave_hs = dsi_compute_interleave_hs(hbp, ddr_alwon,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					exiths_clk, ddr_clk_pre, ddr_clk_post);
+
+		hbp_interleave_lp = dsi_compute_interleave_lp(hbp,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					lp_clk_div, dsi_fclk_hsdiv);
+	}
+
+	if (!blanking_mode) {
+		bl_interleave_hs = dsi_compute_interleave_hs(bllp, ddr_alwon,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					exiths_clk, ddr_clk_pre, ddr_clk_post);
+
+		bl_interleave_lp = dsi_compute_interleave_lp(bllp,
+					enter_hs_mode_lat, exit_hs_mode_lat,
+					lp_clk_div, dsi_fclk_hsdiv);
+	}
+
+	DSSDBG("DSI HS interleaving(TXBYTECLKHS) HSA %d, HFP %d, HBP %d, BLLP %d\n",
+		hsa_interleave_hs, hfp_interleave_hs, hbp_interleave_hs,
+		bl_interleave_hs);
+
+	DSSDBG("DSI LP interleaving(bytes) HSA %d, HFP %d, HBP %d, BLLP %d\n",
+		hsa_interleave_lp, hfp_interleave_lp, hbp_interleave_lp,
+		bl_interleave_lp);
+
+	r = dsi_read_reg(dsidev, DSI_VM_TIMING4);
+	r = FLD_MOD(r, hsa_interleave_hs, 23, 16);
+	r = FLD_MOD(r, hfp_interleave_hs, 15, 8);
+	r = FLD_MOD(r, hbp_interleave_hs, 7, 0);
+	dsi_write_reg(dsidev, DSI_VM_TIMING4, r);
+
+	r = dsi_read_reg(dsidev, DSI_VM_TIMING5);
+	r = FLD_MOD(r, hsa_interleave_lp, 23, 16);
+	r = FLD_MOD(r, hfp_interleave_lp, 15, 8);
+	r = FLD_MOD(r, hbp_interleave_lp, 7, 0);
+	dsi_write_reg(dsidev, DSI_VM_TIMING5, r);
+
+	r = dsi_read_reg(dsidev, DSI_VM_TIMING6);
+	r = FLD_MOD(r, bl_interleave_hs, 31, 15);
+	r = FLD_MOD(r, bl_interleave_lp, 16, 0);
+	dsi_write_reg(dsidev, DSI_VM_TIMING6, r);
+}
+
 static int dsi_proto_config(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -3723,6 +3903,7 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		dsi_config_vp_sync_events(dssdev);
 		dsi_config_blanking_modes(dssdev);
+		dsi_config_cmd_mode_interleaving(dssdev);
 	}
 
 	dsi_vc_initial_config(dsidev, 0);
-- 
cgit v1.2.3


From 3568f2a46f2a73bab18c914df06afd98a97e0e0e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 15 May 2012 15:31:01 +0300
Subject: OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays

There is a problem related to DSS FIFO thresholds and power management
on OMAP3. It seems that when the full PM hits in, we get underflows. The
core reason is unknown, but after experiments it looks like only
particular FIFO thresholds work correctly.

This bug is related to an earlier patch, which added special FIFO
threshold configuration for OMAP3, because DSI command mode output
didn't work with the normal threshold configuration.

However, as the above work-around worked fine for other output types
also, we currently always configure thresholds in this special way on
OMAP3. In theory there should be negligible difference with this special
way and the standard way. The first paragraph explains what happens in
practice.

This patch changes the driver to use the special threshold configuration
only when the output is a manual update display on OMAP3. This does
include RFBI displays also, and although it hasn't been tested (no
boards using RFBI) I suspect the similar behaviour is present there
also, as the DISPC side should work similarly for DSI command mode and
RFBI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Joe Woodward <jw@terrafix.co.uk>
---
 drivers/video/omap2/dss/apply.c | 2 +-
 drivers/video/omap2/dss/dispc.c | 5 +++--
 drivers/video/omap2/dss/dss.h   | 3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index dd88b8f936c4..ab22cc224f3e 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -966,7 +966,7 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
 		return;
 
 	dispc_ovl_compute_fifo_thresholds(ovl->id, &fifo_low, &fifo_high,
-			use_fifo_merge);
+			use_fifo_merge, ovl_manual_update(ovl));
 
 	dss_apply_ovl_fifo_thresholds(ovl, fifo_low, fifo_high);
 }
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b81fafac35b8..ac71fec1dbba 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1031,7 +1031,8 @@ void dispc_enable_fifomerge(bool enable)
 }
 
 void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
-		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge)
+		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge,
+		bool manual_update)
 {
 	/*
 	 * All sizes are in bytes. Both the buffer and burst are made of
@@ -1059,7 +1060,7 @@ void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
 	 * combined fifo size
 	 */
 
-	if (dss_has_feature(FEAT_OMAP3_DSI_FIFO_BUG)) {
+	if (manual_update && dss_has_feature(FEAT_OMAP3_DSI_FIFO_BUG)) {
 		*fifo_low = ovl_fifo_size - burst_size * 2;
 		*fifo_high = total_fifo_size - burst_size;
 	} else {
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 4aa9529a4768..dd1092ceaeef 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -395,7 +395,8 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
 
 void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high);
 void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
-		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge);
+		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge,
+		bool manual_update);
 int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 		bool ilace, bool replication,
 		const struct omap_video_timings *mgr_timings);
-- 
cgit v1.2.3


From 36377357db00f8660039578ba57a2a19bfc9ad3d Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 15 May 2012 15:54:15 +0300
Subject: OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv

Commit 05dd0f5308213e169b02458a7f3a61362e581e14 ("OMAPDSS: DISPC: Update
Accumulator configuration for chroma plane") adds
dispc_ovl_set_accu_uv() function that sets the accu, but the function
only handles YUV and NV12 modes, and BUGs otherwise.

The patch also adds a call to the function, but unfortunately the place
of call was such that the mode could be other than YUV or NV12, thus
crashing the driver.

This patchs moves the call to a slightly later spot, at which point only
YUV and NV12 modes are handled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Chandrabhanu Mahapatra <cmahapatra@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index ac71fec1dbba..0fa1c94e8c58 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1304,9 +1304,6 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 	int scale_x = out_width != orig_width;
 	int scale_y = out_height != orig_height;
 
-	dispc_ovl_set_accu_uv(plane, orig_width, orig_height, out_width,
-			out_height, ilace, color_mode, rotation);
-
 	if (!dss_has_feature(FEAT_HANDLE_UV_SEPARATE))
 		return;
 	if ((color_mode != OMAP_DSS_COLOR_YUV2 &&
@@ -1316,6 +1313,10 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), 0, 8, 8);
 		return;
 	}
+
+	dispc_ovl_set_accu_uv(plane, orig_width, orig_height, out_width,
+			out_height, ilace, color_mode, rotation);
+
 	switch (color_mode) {
 	case OMAP_DSS_COLOR_NV12:
 		/* UV is subsampled by 2 vertically*/
-- 
cgit v1.2.3


From c6eee968d40d319f0ac7a8a63dcbc633d9e6a2ea Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 18 May 2012 11:47:02 +0300
Subject: OMAPDSS: remove compiler warnings when CONFIG_BUG=n

If CONFIG_BUG is not enabled, BUG() does not stop the execution. Many
places in code expect the execution to stop, and this causes compiler
warnings about uninitialized variables and returning from a non-void
function without a return value.

This patch fixes the warnings by initializing the variables and
returning properly after BUG() lines. However, the behaviour is still
undefined after the BUG, but this is the choice the user makes when
using CONFIG_BUG=n.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c   | 31 ++++++++++++++---
 drivers/video/omap2/dss/dispc.h   | 72 +++++++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/display.c |  2 ++
 drivers/video/omap2/dss/dsi.c     |  9 ++++-
 drivers/video/omap2/dss/dss.c     |  3 ++
 drivers/video/omap2/dss/venc.c    |  1 +
 6 files changed, 113 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 0fa1c94e8c58..3d0576d1983c 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -407,6 +407,7 @@ u32 dispc_mgr_get_vsync_irq(enum omap_channel channel)
 		return DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -421,6 +422,7 @@ u32 dispc_mgr_get_framedone_irq(enum omap_channel channel)
 		return 0;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -739,7 +741,7 @@ static void dispc_ovl_set_color_mode(enum omap_plane plane,
 		case OMAP_DSS_COLOR_XRGB16_1555:
 			m = 0xf; break;
 		default:
-			BUG(); break;
+			BUG(); return;
 		}
 	} else {
 		switch (color_mode) {
@@ -776,7 +778,7 @@ static void dispc_ovl_set_color_mode(enum omap_plane plane,
 		case OMAP_DSS_COLOR_XRGB16_1555:
 			m = 0xf; break;
 		default:
-			BUG(); break;
+			BUG(); return;
 		}
 	}
 
@@ -820,6 +822,7 @@ void dispc_ovl_set_channel_out(enum omap_plane plane, enum omap_channel channel)
 			break;
 		default:
 			BUG();
+			return;
 		}
 
 		val = FLD_MOD(val, chan, shift, shift);
@@ -847,6 +850,7 @@ static enum omap_channel dispc_ovl_get_channel_out(enum omap_plane plane)
 		break;
 	default:
 		BUG();
+		return 0;
 	}
 
 	val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane));
@@ -1209,6 +1213,7 @@ static void dispc_ovl_set_accu_uv(enum omap_plane plane,
 		break;
 	default:
 		BUG();
+		return;
 	}
 
 	switch (color_mode) {
@@ -1224,6 +1229,7 @@ static void dispc_ovl_set_accu_uv(enum omap_plane plane,
 		break;
 	default:
 		BUG();
+		return;
 	}
 
 	accu_val = &accu_table[idx];
@@ -1339,6 +1345,7 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 		break;
 	default:
 		BUG();
+		return;
 	}
 
 	if (out_width != orig_width)
@@ -1466,6 +1473,7 @@ static int color_mode_to_bpp(enum omap_color_mode color_mode)
 		return 32;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -1479,6 +1487,7 @@ static s32 pixinc(int pixels, u8 ps)
 		return 1 - (-pixels + 1) * ps;
 	else
 		BUG();
+		return 0;
 }
 
 static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
@@ -1562,6 +1571,7 @@ static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
 
 	default:
 		BUG();
+		return;
 	}
 }
 
@@ -1717,6 +1727,7 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 
 	default:
 		BUG();
+		return;
 	}
 }
 
@@ -2106,6 +2117,11 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	if (fieldmode)
 		field_offset = 1;
 
+	offset0 = 0;
+	offset1 = 0;
+	row_inc = 0;
+	pix_inc = 0;
+
 	if (oi->rotation_type == OMAP_DSS_ROT_DMA)
 		calc_dma_rotation_offset(oi->rotation, oi->mirror,
 				oi->screen_width, in_width, frame_height,
@@ -2316,8 +2332,10 @@ bool dispc_mgr_is_enabled(enum omap_channel channel)
 		return !!REG_GET(DISPC_CONTROL, 1, 1);
 	else if (channel == OMAP_DSS_CHANNEL_LCD2)
 		return !!REG_GET(DISPC_CONTROL2, 0, 0);
-	else
+	else {
 		BUG();
+		return false;
+	}
 }
 
 void dispc_mgr_enable(enum omap_channel channel, bool enable)
@@ -2593,8 +2611,10 @@ void dispc_mgr_set_timings(enum omap_channel channel,
 	DSSDBG("channel %d xres %u yres %u\n", channel, timings->x_res,
 			timings->y_res);
 
-	if (!dispc_mgr_timings_ok(channel, timings))
+	if (!dispc_mgr_timings_ok(channel, timings)) {
 		BUG();
+		return;
+	}
 
 	if (dispc_mgr_is_lcd(channel)) {
 		_dispc_mgr_set_lcd_timings(channel, timings->hsw, timings->hfp,
@@ -2658,6 +2678,7 @@ unsigned long dispc_fclk_rate(void)
 		break;
 	default:
 		BUG();
+		return 0;
 	}
 
 	return r;
@@ -2688,6 +2709,7 @@ unsigned long dispc_mgr_lclk_rate(enum omap_channel channel)
 		break;
 	default:
 		BUG();
+		return 0;
 	}
 
 	return r / lcd;
@@ -2720,6 +2742,7 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
 			return hdmi_get_pixel_clock();
 		default:
 			BUG();
+			return 0;
 		}
 	}
 }
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/omap2/dss/dispc.h
index 5836bd1650f9..f278080e1063 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/omap2/dss/dispc.h
@@ -120,6 +120,7 @@ static inline u16 DISPC_DEFAULT_COLOR(enum omap_channel channel)
 		return 0x03AC;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -134,6 +135,7 @@ static inline u16 DISPC_TRANS_COLOR(enum omap_channel channel)
 		return 0x03B0;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -144,10 +146,12 @@ static inline u16 DISPC_TIMING_H(enum omap_channel channel)
 		return 0x0064;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x0400;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -158,10 +162,12 @@ static inline u16 DISPC_TIMING_V(enum omap_channel channel)
 		return 0x0068;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x0404;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -172,10 +178,12 @@ static inline u16 DISPC_POL_FREQ(enum omap_channel channel)
 		return 0x006C;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x0408;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -186,10 +194,12 @@ static inline u16 DISPC_DIVISORo(enum omap_channel channel)
 		return 0x0070;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x040C;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -205,6 +215,7 @@ static inline u16 DISPC_SIZE_MGR(enum omap_channel channel)
 		return 0x03CC;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -215,10 +226,12 @@ static inline u16 DISPC_DATA_CYCLE1(enum omap_channel channel)
 		return 0x01D4;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x03C0;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -229,10 +242,12 @@ static inline u16 DISPC_DATA_CYCLE2(enum omap_channel channel)
 		return 0x01D8;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x03C4;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -243,10 +258,12 @@ static inline u16 DISPC_DATA_CYCLE3(enum omap_channel channel)
 		return 0x01DC;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x03C8;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -257,10 +274,12 @@ static inline u16 DISPC_CPR_COEF_R(enum omap_channel channel)
 		return 0x0220;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x03BC;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -271,10 +290,12 @@ static inline u16 DISPC_CPR_COEF_G(enum omap_channel channel)
 		return 0x0224;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x03B8;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -285,10 +306,12 @@ static inline u16 DISPC_CPR_COEF_B(enum omap_channel channel)
 		return 0x0228;
 	case OMAP_DSS_CHANNEL_DIGIT:
 		BUG();
+		return 0;
 	case OMAP_DSS_CHANNEL_LCD2:
 		return 0x03B4;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -306,6 +329,7 @@ static inline u16 DISPC_OVL_BASE(enum omap_plane plane)
 		return 0x0300;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -321,6 +345,7 @@ static inline u16 DISPC_BA0_OFFSET(enum omap_plane plane)
 		return 0x0008;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -335,6 +360,7 @@ static inline u16 DISPC_BA1_OFFSET(enum omap_plane plane)
 		return 0x000C;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -343,6 +369,7 @@ static inline u16 DISPC_BA0_UV_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0544;
 	case OMAP_DSS_VIDEO2:
@@ -351,6 +378,7 @@ static inline u16 DISPC_BA0_UV_OFFSET(enum omap_plane plane)
 		return 0x0310;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -359,6 +387,7 @@ static inline u16 DISPC_BA1_UV_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0548;
 	case OMAP_DSS_VIDEO2:
@@ -367,6 +396,7 @@ static inline u16 DISPC_BA1_UV_OFFSET(enum omap_plane plane)
 		return 0x0314;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -381,6 +411,7 @@ static inline u16 DISPC_POS_OFFSET(enum omap_plane plane)
 		return 0x009C;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -395,6 +426,7 @@ static inline u16 DISPC_SIZE_OFFSET(enum omap_plane plane)
 		return 0x00A8;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -410,6 +442,7 @@ static inline u16 DISPC_ATTR_OFFSET(enum omap_plane plane)
 		return 0x0070;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -418,6 +451,7 @@ static inline u16 DISPC_ATTR2_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0568;
 	case OMAP_DSS_VIDEO2:
@@ -426,6 +460,7 @@ static inline u16 DISPC_ATTR2_OFFSET(enum omap_plane plane)
 		return 0x032C;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -441,6 +476,7 @@ static inline u16 DISPC_FIFO_THRESH_OFFSET(enum omap_plane plane)
 		return 0x008C;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -456,6 +492,7 @@ static inline u16 DISPC_FIFO_SIZE_STATUS_OFFSET(enum omap_plane plane)
 		return 0x0088;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -471,6 +508,7 @@ static inline u16 DISPC_ROW_INC_OFFSET(enum omap_plane plane)
 		return 0x00A4;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -486,6 +524,7 @@ static inline u16 DISPC_PIX_INC_OFFSET(enum omap_plane plane)
 		return 0x0098;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -498,8 +537,10 @@ static inline u16 DISPC_WINDOW_SKIP_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 	case OMAP_DSS_VIDEO3:
 		BUG();
+		return 0;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -512,8 +553,10 @@ static inline u16 DISPC_TABLE_BA_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 	case OMAP_DSS_VIDEO3:
 		BUG();
+		return 0;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -522,6 +565,7 @@ static inline u16 DISPC_FIR_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 		return 0x0024;
@@ -529,6 +573,7 @@ static inline u16 DISPC_FIR_OFFSET(enum omap_plane plane)
 		return 0x0090;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -537,6 +582,7 @@ static inline u16 DISPC_FIR2_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0580;
 	case OMAP_DSS_VIDEO2:
@@ -545,6 +591,7 @@ static inline u16 DISPC_FIR2_OFFSET(enum omap_plane plane)
 		return 0x0424;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -553,6 +600,7 @@ static inline u16 DISPC_PIC_SIZE_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 		return 0x0028;
@@ -560,6 +608,7 @@ static inline u16 DISPC_PIC_SIZE_OFFSET(enum omap_plane plane)
 		return 0x0094;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -569,6 +618,7 @@ static inline u16 DISPC_ACCU0_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 		return 0x002C;
@@ -576,6 +626,7 @@ static inline u16 DISPC_ACCU0_OFFSET(enum omap_plane plane)
 		return 0x0000;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -584,6 +635,7 @@ static inline u16 DISPC_ACCU2_0_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0584;
 	case OMAP_DSS_VIDEO2:
@@ -592,6 +644,7 @@ static inline u16 DISPC_ACCU2_0_OFFSET(enum omap_plane plane)
 		return 0x0428;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -600,6 +653,7 @@ static inline u16 DISPC_ACCU1_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 		return 0x0030;
@@ -607,6 +661,7 @@ static inline u16 DISPC_ACCU1_OFFSET(enum omap_plane plane)
 		return 0x0004;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -615,6 +670,7 @@ static inline u16 DISPC_ACCU2_1_OFFSET(enum omap_plane plane)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0588;
 	case OMAP_DSS_VIDEO2:
@@ -623,6 +679,7 @@ static inline u16 DISPC_ACCU2_1_OFFSET(enum omap_plane plane)
 		return 0x042C;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -632,6 +689,7 @@ static inline u16 DISPC_FIR_COEF_H_OFFSET(enum omap_plane plane, u16 i)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 		return 0x0034 + i * 0x8;
@@ -639,6 +697,7 @@ static inline u16 DISPC_FIR_COEF_H_OFFSET(enum omap_plane plane, u16 i)
 		return 0x0010 + i * 0x8;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -648,6 +707,7 @@ static inline u16 DISPC_FIR_COEF_H2_OFFSET(enum omap_plane plane, u16 i)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x058C + i * 0x8;
 	case OMAP_DSS_VIDEO2:
@@ -656,6 +716,7 @@ static inline u16 DISPC_FIR_COEF_H2_OFFSET(enum omap_plane plane, u16 i)
 		return 0x0430 + i * 0x8;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -665,6 +726,7 @@ static inline u16 DISPC_FIR_COEF_HV_OFFSET(enum omap_plane plane, u16 i)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 		return 0x0038 + i * 0x8;
@@ -672,6 +734,7 @@ static inline u16 DISPC_FIR_COEF_HV_OFFSET(enum omap_plane plane, u16 i)
 		return 0x0014 + i * 0x8;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -681,6 +744,7 @@ static inline u16 DISPC_FIR_COEF_HV2_OFFSET(enum omap_plane plane, u16 i)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0590 + i * 8;
 	case OMAP_DSS_VIDEO2:
@@ -689,6 +753,7 @@ static inline u16 DISPC_FIR_COEF_HV2_OFFSET(enum omap_plane plane, u16 i)
 		return 0x0434 + i * 0x8;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -698,12 +763,14 @@ static inline u16 DISPC_CONV_COEF_OFFSET(enum omap_plane plane, u16 i)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 	case OMAP_DSS_VIDEO3:
 		return 0x0074 + i * 0x4;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -713,6 +780,7 @@ static inline u16 DISPC_FIR_COEF_V_OFFSET(enum omap_plane plane, u16 i)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x0124 + i * 0x4;
 	case OMAP_DSS_VIDEO2:
@@ -721,6 +789,7 @@ static inline u16 DISPC_FIR_COEF_V_OFFSET(enum omap_plane plane, u16 i)
 		return 0x0050 + i * 0x4;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -730,6 +799,7 @@ static inline u16 DISPC_FIR_COEF_V2_OFFSET(enum omap_plane plane, u16 i)
 	switch (plane) {
 	case OMAP_DSS_GFX:
 		BUG();
+		return 0;
 	case OMAP_DSS_VIDEO1:
 		return 0x05CC + i * 0x4;
 	case OMAP_DSS_VIDEO2:
@@ -738,6 +808,7 @@ static inline u16 DISPC_FIR_COEF_V2_OFFSET(enum omap_plane plane, u16 i)
 		return 0x0470 + i * 0x4;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -754,6 +825,7 @@ static inline u16 DISPC_PRELOAD_OFFSET(enum omap_plane plane)
 		return 0x00A0;
 	default:
 		BUG();
+		return 0;
 	}
 }
 #endif
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index faf7d91c4a84..249010630370 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -304,6 +304,7 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
 		return 24;
 	default:
 		BUG();
+		return 0;
 	}
 }
 EXPORT_SYMBOL(omapdss_default_get_recommended_bpp);
@@ -347,6 +348,7 @@ bool dss_use_replication(struct omap_dss_device *dssdev,
 		break;
 	default:
 		BUG();
+		return false;
 	}
 
 	return bpp > 16;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index f2d835fc4dc3..ec363d8390ed 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -446,6 +446,7 @@ u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt)
 		return 16;
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -2003,6 +2004,7 @@ static unsigned dsi_get_line_buf_size(struct platform_device *dsidev)
 		return 1365 * 3;	/* 1365x24 bits */
 	default:
 		BUG();
+		return 0;
 	}
 }
 
@@ -2415,6 +2417,7 @@ static void dsi_config_tx_fifo(struct platform_device *dsidev,
 		if (add + size > 4) {
 			DSSERR("Illegal FIFO configuration\n");
 			BUG();
+			return;
 		}
 
 		v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
@@ -2447,6 +2450,7 @@ static void dsi_config_rx_fifo(struct platform_device *dsidev,
 		if (add + size > 4) {
 			DSSERR("Illegal FIFO configuration\n");
 			BUG();
+			return;
 		}
 
 		v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
@@ -2588,6 +2592,7 @@ static int dsi_sync_vc(struct platform_device *dsidev, int channel)
 		return dsi_sync_vc_l4(dsidev, channel);
 	default:
 		BUG();
+		return -EINVAL;
 	}
 }
 
@@ -3156,6 +3161,7 @@ static int dsi_vc_generic_send_read_request(struct omap_dss_device *dssdev,
 		data = reqdata[0] | (reqdata[1] << 8);
 	} else {
 		BUG();
+		return -EINVAL;
 	}
 
 	r = dsi_vc_send_short(dsidev, channel, data_type, data, 0);
@@ -3270,7 +3276,6 @@ static int dsi_vc_read_rx_fifo(struct platform_device *dsidev, int channel,
 		goto err;
 	}
 
-	BUG();
 err:
 	DSSERR("dsi_vc_read_rx_fifo(ch %d type %s) failed\n", channel,
 		type == DSS_DSI_CONTENT_GENERIC ? "GENERIC" : "DCS");
@@ -3879,6 +3884,7 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 		break;
 	default:
 		BUG();
+		return -EINVAL;
 	}
 
 	r = dsi_read_reg(dsidev, DSI_CTRL);
@@ -4119,6 +4125,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 			break;
 		default:
 			BUG();
+			return -EINVAL;
 		};
 
 		dsi_if_enable(dsidev, false);
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 2183f840a7ac..6ea1ff149f6f 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -325,6 +325,7 @@ void dss_select_dispc_clk_source(enum omap_dss_clk_source clk_src)
 		break;
 	default:
 		BUG();
+		return;
 	}
 
 	dss_feat_get_reg_field(FEAT_REG_DISPC_CLK_SWITCH, &start, &end);
@@ -358,6 +359,7 @@ void dss_select_dsi_clk_source(int dsi_module,
 		break;
 	default:
 		BUG();
+		return;
 	}
 
 	pos = dsi_module == 0 ? 1 : 10;
@@ -393,6 +395,7 @@ void dss_select_lcd_clk_source(enum omap_channel channel,
 		break;
 	default:
 		BUG();
+		return;
 	}
 
 	pos = channel == OMAP_DSS_CHANNEL_LCD ? 0 : 12;
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 178c40d3312e..1dbf1550773e 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -415,6 +415,7 @@ static const struct venc_config *venc_timings_to_config(
 		return &venc_config_ntsc_trm;
 
 	BUG();
+	return NULL;
 }
 
 static int venc_power_on(struct omap_dss_device *dssdev)
-- 
cgit v1.2.3


From 4a75cb857d2ec5f8f40f23a817ec162b93661bae Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 18 May 2012 11:48:28 +0300
Subject: OMAPFB: remove compiler warnings when CONFIG_BUG=n

If CONFIG_BUG is not enabled, BUG() does not stop the execution. Many
places in code expect the execution to stop, and this causes compiler
warnings about uninitialized variables and returning from a non-void
function without a return value.

This patch fixes the warnings by initializing the variables and
returning properly after BUG() lines. However, the behaviour is still
undefined after the BUG, but this is the choice the user makes when
using CONFIG_BUG=n.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 1 +
 drivers/video/omap2/omapfb/omapfb.h      | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 165a4be95025..3450ea0966c9 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -179,6 +179,7 @@ static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
 		break;
 	default:
 		BUG();
+		return 0;
 	}
 
 	offset *= vrfb->bytespp;
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index c0bdc9b54ecf..30361a09aecd 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -166,6 +166,7 @@ static inline struct omapfb_display_data *get_display_data(
 
 	/* This should never happen */
 	BUG();
+	return NULL;
 }
 
 static inline void omapfb_lock(struct omapfb2_device *fbdev)
-- 
cgit v1.2.3


From 3cb6a1b9672a2e0937a1475e3d68e6c236133156 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 18 May 2012 11:49:53 +0300
Subject: OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n

If CONFIG_BUG is not enabled, BUG() does not stop the execution. Many
places in code expect the execution to stop, and this causes compiler
warnings about uninitialized variables and returning from a non-void
function without a return value.

This patch fixes the warnings by initializing the variables and
returning properly after BUG() lines. However, the behaviour is still
undefined after the BUG, but this is the choice the user makes when
using CONFIG_BUG=n.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/vrfb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index 4e5b960c32c8..7e990220ad2a 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -179,8 +179,10 @@ void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
 		pixel_size_exp = 2;
 	else if (bytespp == 2)
 		pixel_size_exp = 1;
-	else
+	else {
 		BUG();
+		return;
+	}
 
 	vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp;
 	vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT);
-- 
cgit v1.2.3


From 65e006ff4bb06d42b532f866a846db6e4e637723 Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Fri, 11 May 2012 19:19:55 +0530
Subject: OMAPDSS: DISPC: Support rotation through TILER

TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner.
Physical memory can be mapped to a portion of OMAP's system address space called
TILER address space. The TILER address space is split into 8 views. Each view
represents a rotated or mirrored form of the mapped physical memory. When a
DISPC overlay's base address is programmed to one of these views, the TILER
fetches the pixels according to the orientation of the view. A view is further
split into 4 containers, each container holds elements of a particular size.
Rotation can be achieved at the granularity of elements in the container. For
more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM.
Rotation type TILER has been added which is used to exploit the capabilities of
these 8 views for performing various rotations.

When fetching from addresses mapped to TILER space, the DISPC DMA can fetch
pixels in either 1D or 2D bursts. The fetch depends on which TILER container we
are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts,
and page mode sized containers require 1D bursts.

The DSS2 user is expected to provide the Tiler address of the view that it is
interested in. This is passed to the paddr and p_uv_addr parameters in
omap_overlay_info. It is also expected to provide the stride value based on the
view's orientation and container type, this should be passed to the screen_width
parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is
used to calculate the required row_inc for DISPC. x_predecim and y_predecim are
also used to calculate row_inc and pix_inc thereby adding predecimation support
for TILER.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c        | 60 +++++++++++++++++++++++++++++++++-
 drivers/video/omap2/dss/dss_features.c | 16 +++++++++
 drivers/video/omap2/dss/dss_features.h |  3 ++
 drivers/video/omap2/dss/overlay.c      |  6 ++++
 4 files changed, 84 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 3d0576d1983c..9626b2c0c9e1 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -785,6 +785,18 @@ static void dispc_ovl_set_color_mode(enum omap_plane plane,
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), m, 4, 1);
 }
 
+static void dispc_ovl_configure_burst_type(enum omap_plane plane,
+		enum omap_dss_rotation_type rotation_type)
+{
+	if (dss_has_feature(FEAT_BURST_2D) == 0)
+		return;
+
+	if (rotation_type == OMAP_DSS_ROT_TILER)
+		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), 1, 29, 29);
+	else
+		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), 0, 29, 29);
+}
+
 void dispc_ovl_set_channel_out(enum omap_plane plane, enum omap_channel channel)
 {
 	int shift;
@@ -1731,6 +1743,45 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 	}
 }
 
+static void calc_tiler_rotation_offset(u16 screen_width, u16 width,
+		enum omap_color_mode color_mode, bool fieldmode,
+		unsigned int field_offset, unsigned *offset0, unsigned *offset1,
+		s32 *row_inc, s32 *pix_inc, int x_predecim, int y_predecim)
+{
+	u8 ps;
+
+	switch (color_mode) {
+	case OMAP_DSS_COLOR_CLUT1:
+	case OMAP_DSS_COLOR_CLUT2:
+	case OMAP_DSS_COLOR_CLUT4:
+	case OMAP_DSS_COLOR_CLUT8:
+		BUG();
+		return;
+	default:
+		ps = color_mode_to_bpp(color_mode) / 8;
+		break;
+	}
+
+	DSSDBG("scrw %d, width %d\n", screen_width, width);
+
+	/*
+	 * field 0 = even field = bottom field
+	 * field 1 = odd field = top field
+	 */
+	*offset1 = 0;
+	if (field_offset)
+		*offset0 = *offset1 + field_offset * screen_width * ps;
+	else
+		*offset0 = *offset1;
+	*row_inc = pixinc(1 + (y_predecim * screen_width - width * x_predecim) +
+			(fieldmode ? screen_width : 0), ps);
+	if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+		color_mode == OMAP_DSS_COLOR_UYVY)
+		*pix_inc = pixinc(x_predecim, 2 * ps);
+	else
+		*pix_inc = pixinc(x_predecim, ps);
+}
+
 /*
  * This function is used to avoid synclosts in OMAP3, because of some
  * undocumented horizontal position and timing related limitations.
@@ -2122,7 +2173,12 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	row_inc = 0;
 	pix_inc = 0;
 
-	if (oi->rotation_type == OMAP_DSS_ROT_DMA)
+	if (oi->rotation_type == OMAP_DSS_ROT_TILER)
+		calc_tiler_rotation_offset(oi->screen_width, in_width,
+				oi->color_mode, fieldmode, field_offset,
+				&offset0, &offset1, &row_inc, &pix_inc,
+				x_predecim, y_predecim);
+	else if (oi->rotation_type == OMAP_DSS_ROT_DMA)
 		calc_dma_rotation_offset(oi->rotation, oi->mirror,
 				oi->screen_width, in_width, frame_height,
 				oi->color_mode, fieldmode, field_offset,
@@ -2140,6 +2196,8 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 
 	dispc_ovl_set_color_mode(plane, oi->color_mode);
 
+	dispc_ovl_configure_burst_type(plane, oi->rotation_type);
+
 	dispc_ovl_set_ba0(plane, oi->paddr + offset0);
 	dispc_ovl_set_ba1(plane, oi->paddr + offset1);
 
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 2627441731b1..938709724f0c 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -52,6 +52,8 @@ struct omap_dss_features {
 	const char * const *clksrc_names;
 	const struct dss_param_range *dss_params;
 
+	const enum omap_dss_rotation_type supported_rotation_types;
+
 	const u32 buffer_size_unit;
 	const u32 burst_size_unit;
 };
@@ -405,6 +407,7 @@ static const enum dss_feat_id omap4430_es1_0_dss_feat_list[] = {
 	FEAT_FIR_COEF_V,
 	FEAT_ALPHA_FREE_ZORDER,
 	FEAT_FIFO_MERGE,
+	FEAT_BURST_2D,
 };
 
 static const enum dss_feat_id omap4430_es2_0_1_2_dss_feat_list[] = {
@@ -422,6 +425,7 @@ static const enum dss_feat_id omap4430_es2_0_1_2_dss_feat_list[] = {
 	FEAT_FIR_COEF_V,
 	FEAT_ALPHA_FREE_ZORDER,
 	FEAT_FIFO_MERGE,
+	FEAT_BURST_2D,
 };
 
 static const enum dss_feat_id omap4_dss_feat_list[] = {
@@ -440,6 +444,7 @@ static const enum dss_feat_id omap4_dss_feat_list[] = {
 	FEAT_FIR_COEF_V,
 	FEAT_ALPHA_FREE_ZORDER,
 	FEAT_FIFO_MERGE,
+	FEAT_BURST_2D,
 };
 
 /* OMAP2 DSS Features */
@@ -457,6 +462,7 @@ static const struct omap_dss_features omap2_dss_features = {
 	.overlay_caps = omap2_dss_overlay_caps,
 	.clksrc_names = omap2_dss_clk_source_names,
 	.dss_params = omap2_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
 	.buffer_size_unit = 1,
 	.burst_size_unit = 8,
 };
@@ -476,6 +482,7 @@ static const struct omap_dss_features omap3430_dss_features = {
 	.overlay_caps = omap3430_dss_overlay_caps,
 	.clksrc_names = omap3_dss_clk_source_names,
 	.dss_params = omap3_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
 	.buffer_size_unit = 1,
 	.burst_size_unit = 8,
 };
@@ -494,6 +501,7 @@ static const struct omap_dss_features omap3630_dss_features = {
 	.overlay_caps = omap3630_dss_overlay_caps,
 	.clksrc_names = omap3_dss_clk_source_names,
 	.dss_params = omap3_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
 	.buffer_size_unit = 1,
 	.burst_size_unit = 8,
 };
@@ -514,6 +522,7 @@ static const struct omap_dss_features omap4430_es1_0_dss_features  = {
 	.overlay_caps = omap4_dss_overlay_caps,
 	.clksrc_names = omap4_dss_clk_source_names,
 	.dss_params = omap4_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
 	.buffer_size_unit = 16,
 	.burst_size_unit = 16,
 };
@@ -533,6 +542,7 @@ static const struct omap_dss_features omap4430_es2_0_1_2_dss_features = {
 	.overlay_caps = omap4_dss_overlay_caps,
 	.clksrc_names = omap4_dss_clk_source_names,
 	.dss_params = omap4_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
 	.buffer_size_unit = 16,
 	.burst_size_unit = 16,
 };
@@ -552,6 +562,7 @@ static const struct omap_dss_features omap4_dss_features = {
 	.overlay_caps = omap4_dss_overlay_caps,
 	.clksrc_names = omap4_dss_clk_source_names,
 	.dss_params = omap4_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
 	.buffer_size_unit = 16,
 	.burst_size_unit = 16,
 };
@@ -672,6 +683,11 @@ void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end)
 	*end = omap_current_dss_features->reg_fields[id].end;
 }
 
+bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type)
+{
+	return omap_current_dss_features->supported_rotation_types & rot_type;
+}
+
 void dss_features_init(void)
 {
 	if (cpu_is_omap24xx())
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 3736367089a1..bdf469f080e7 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -62,6 +62,7 @@ enum dss_feat_id {
 	FEAT_FIFO_MERGE,
 	/* An unknown HW bug causing the normal FIFO thresholds not to work */
 	FEAT_OMAP3_DSI_FIFO_BUG,
+	FEAT_BURST_2D,
 };
 
 /* DSS register field id */
@@ -110,6 +111,8 @@ const char *dss_feat_get_clk_source_name(enum omap_dss_clk_source id);
 u32 dss_feat_get_buffer_size_unit(void);	/* in bytes */
 u32 dss_feat_get_burst_size_unit(void);		/* in bytes */
 
+bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type);
+
 bool dss_has_feature(enum dss_feat_id id);
 void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
 void dss_features_init(void);
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 0da5eb654ae9..b0ba60f88dd2 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -628,6 +628,12 @@ int dss_ovl_simple_check(struct omap_overlay *ovl,
 		return -EINVAL;
 	}
 
+	if (dss_feat_rotation_type_supported(info->rotation_type) == 0) {
+		DSSERR("check_overlay: rotation type %d not supported\n",
+				info->rotation_type);
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 2aefad49d8e3a898cf629d4c5264ffd061113531 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 18 May 2012 14:36:54 +0530
Subject: OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers
 connected to VENC

DSS2 driver uses the timings in manager's private data to check the validity of
overlay and manager infos written by the user. For VENC interface, we divide the
Y resolution by half when writing to the DISPC_DIGIT_SIZE register as the
content is interlaced. However, the height of the manager/display with respect
to the content shown through VENC still remains the same.

The VENC driver divides the y_res parameter in omap_video_timings by half, and
then applies the configuration. This leads to manager's private data storing
the wrong Y resolution. Hence, overlay related checks fail.

Ensure that manager's private data stores the original timings, and the Y
resolution is halved only when we write to the DISPC register. This is a hack,
the proper solution would be to pass some sort of interlace parameter which
makes the call whether we should divide y_res or not.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 29 ++++++++++++++++-------------
 drivers/video/omap2/dss/venc.c  |  6 +-----
 2 files changed, 17 insertions(+), 18 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 9626b2c0c9e1..4749ac356469 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2665,37 +2665,40 @@ void dispc_mgr_set_timings(enum omap_channel channel,
 {
 	unsigned xtot, ytot;
 	unsigned long ht, vt;
+	struct omap_video_timings t = *timings;
 
-	DSSDBG("channel %d xres %u yres %u\n", channel, timings->x_res,
-			timings->y_res);
+	DSSDBG("channel %d xres %u yres %u\n", channel, t.x_res, t.y_res);
 
-	if (!dispc_mgr_timings_ok(channel, timings)) {
+	if (!dispc_mgr_timings_ok(channel, &t)) {
 		BUG();
 		return;
 	}
 
 	if (dispc_mgr_is_lcd(channel)) {
-		_dispc_mgr_set_lcd_timings(channel, timings->hsw, timings->hfp,
-				timings->hbp, timings->vsw, timings->vfp,
-				timings->vbp);
+		_dispc_mgr_set_lcd_timings(channel, t.hsw, t.hfp, t.hbp, t.vsw,
+				t.vfp, t.vbp);
 
-		xtot = timings->x_res + timings->hfp + timings->hsw +
-				timings->hbp;
-		ytot = timings->y_res + timings->vfp + timings->vsw +
-				timings->vbp;
+		xtot = t.x_res + t.hfp + t.hsw + t.hbp;
+		ytot = t.y_res + t.vfp + t.vsw + t.vbp;
 
 		ht = (timings->pixel_clock * 1000) / xtot;
 		vt = (timings->pixel_clock * 1000) / xtot / ytot;
 
 		DSSDBG("pck %u\n", timings->pixel_clock);
 		DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n",
-			timings->hsw, timings->hfp, timings->hbp,
-			timings->vsw, timings->vfp, timings->vbp);
+			t.hsw, t.hfp, t.hbp, t.vsw, t.vfp, t.vbp);
 
 		DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
+	} else {
+		enum dss_hdmi_venc_clk_source_select source;
+
+		source = dss_get_hdmi_venc_clk_source();
+
+		if (source == DSS_VENC_TV_CLK)
+			t.y_res /= 2;
 	}
 
-	dispc_mgr_set_size(channel, timings->x_res, timings->y_res);
+	dispc_mgr_set_size(channel, t.x_res, t.y_res);
 }
 
 static void dispc_mgr_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 1dbf1550773e..09be43d02adf 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -422,7 +422,6 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 {
 	u32 l;
 	int r;
-	struct omap_video_timings timings;
 
 	venc_reset();
 	venc_write_config(venc_timings_to_config(&dssdev->panel.timings));
@@ -442,10 +441,7 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 
 	venc_write_reg(VENC_OUTPUT_CONTROL, l);
 
-	timings = dssdev->panel.timings;
-	timings.y_res /= 2;
-
-	dss_mgr_set_timings(dssdev->manager, &timings);
+	dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
 
 	r = regulator_enable(venc.vdda_dac_reg);
 	if (r)
-- 
cgit v1.2.3


From c808ab9c82b20227a8b7659c5c8b75290047523c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 21 May 2012 09:47:12 +0530
Subject: OMAPDSS: Apply VENC timings even if panel is disabled

The VENC interfaces uses it's venc_set_timing() function to take in a new set
of timings. If the panel is disabled, it does not disable and re-enable the
interface. Currently, the manager timings are applied in venc_power_on(), these
are not called by set_timings if the panel is disabled. When checking overlay
and manager data, the DSS driver uses the last applied manager timings, and not
the timings held by omap_dss_device struct. Hence, there is a need to apply the
new manager timings even if the panel is disabled.

Apply the manager timings if the VENC panel is disabled.

This is similar to the commit below which fixed the same issue for HDMI/DPI
interfaces:

fcc36619901064a76e15a545ea36d38ba0e54192

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/venc.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 09be43d02adf..2b8973931ff4 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -645,6 +645,8 @@ static void venc_set_timings(struct omap_dss_device *dssdev,
 		/* turn the venc off and on to get new timings to use */
 		venc_panel_disable(dssdev);
 		venc_panel_enable(dssdev);
+	} else {
+		dss_mgr_set_timings(dssdev->manager, timings);
 	}
 }
 
-- 
cgit v1.2.3


From e92a5b28f71aea01b281f9c89d97a4bc5b24748f Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Mon, 21 May 2012 21:47:21 -0500
Subject: OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request

genirq requires that the IRQ requests that do not provided a handler to
use the IRQF_ONESHOT flag. This is to prevent situations in which the irq line
is reenabled while the interrupt is still asserted. While this situation may
not happen in edge type interrupts, genirq still requires to use IRQF_ONESHOT.

Also, remove the IRQF_DISABLED as the flag is now a NOOP and has been
deprecated.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 667c960e10b9..4dae1b291079 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -303,9 +303,9 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data)
 	REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
 
 	r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio),
-			NULL, hpd_irq_handler,
-			IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			IRQF_TRIGGER_FALLING, "hpd", ip_data);
+				 NULL, hpd_irq_handler,
+				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+				 IRQF_ONESHOT, "hpd", ip_data);
 	if (r) {
 		DSSERR("HPD IRQ request failed\n");
 		hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
-- 
cgit v1.2.3