From 618aa1068df29c37a58045fe940f9106664153fd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:07 +0100 Subject: USB: garmin_gps: fix memory leak on disconnect Remove bogus disconnect test introduced by 95bef012e ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/garmin_gps.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 1a07b12ef341..81caf5623ee2 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -956,10 +956,7 @@ static void garmin_close(struct usb_serial_port *port) if (!serial) return; - mutex_lock(&port->serial->disc_mutex); - - if (!port->serial->disconnected) - garmin_clear(garmin_data_p); + garmin_clear(garmin_data_p); /* shutdown our urbs */ usb_kill_urb(port->read_urb); @@ -968,8 +965,6 @@ static void garmin_close(struct usb_serial_port *port) /* keep reset state so we know that we must start a new session */ if (garmin_data_p->state != STATE_RESET) garmin_data_p->state = STATE_DISCONNECTED; - - mutex_unlock(&port->serial->disc_mutex); } -- cgit v1.2.3 From 5492bf3d5655b4954164f69c02955a7fca267611 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:08 +0100 Subject: USB: io_ti: fix get_icount for two port adapters Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the new icount interface"). Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index c23776679f70..d7d3c0e7cd27 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2649,6 +2649,7 @@ static struct usb_serial_driver edgeport_2port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, + .get_icount = edge_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, -- cgit v1.2.3 From d7971051e4df825e0bc11b995e87bfe86355b8e5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:09 +0100 Subject: USB: serial: fix interface refcounting Make sure the interface is not released before our serial device. Note that drivers are still not allowed to access the interface in any way that may interfere with another driver that may have gotten bound to the same interface after disconnect returns. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index a19ed74d770d..2e70efa08b77 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -151,6 +151,7 @@ static void destroy_serial(struct kref *kref) } } + usb_put_intf(serial->interface); usb_put_dev(serial->dev); kfree(serial); } @@ -620,7 +621,7 @@ static struct usb_serial *create_serial(struct usb_device *dev, } serial->dev = usb_get_dev(dev); serial->type = driver; - serial->interface = interface; + serial->interface = usb_get_intf(interface); kref_init(&serial->kref); mutex_init(&serial->disc_mutex); serial->minor = SERIAL_TTY_NO_MINOR; -- cgit v1.2.3 From 5018860321dc7a9e50a75d5f319bc981298fb5b7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:11 +0100 Subject: USB: ark3116: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ark3116.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index cbd904b8fba5..4775f8209e55 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -62,7 +62,6 @@ static int is_irda(struct usb_serial *serial) } struct ark3116_private { - wait_queue_head_t delta_msr_wait; struct async_icount icount; int irda; /* 1 for irda device */ @@ -146,7 +145,6 @@ static int ark3116_port_probe(struct usb_serial_port *port) if (!priv) return -ENOMEM; - init_waitqueue_head(&priv->delta_msr_wait); mutex_init(&priv->hw_lock); spin_lock_init(&priv->status_lock); @@ -456,10 +454,14 @@ static int ark3116_ioctl(struct tty_struct *tty, case TIOCMIWAIT: for (;;) { struct async_icount prev = priv->icount; - interruptible_sleep_on(&priv->delta_msr_wait); + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + if ((prev.rng == priv->icount.rng) && (prev.dsr == priv->icount.dsr) && (prev.dcd == priv->icount.dcd) && @@ -580,7 +582,7 @@ static void ark3116_update_msr(struct usb_serial_port *port, __u8 msr) priv->icount.dcd++; if (msr & UART_MSR_TERI) priv->icount.rng++; - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); } } -- cgit v1.2.3 From fa1e11d5231c001c80a479160b5832933c5d35fb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:12 +0100 Subject: USB: ch341: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ch341.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index d255f66e708e..07d4650a32ab 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -80,7 +80,6 @@ MODULE_DEVICE_TABLE(usb, id_table); struct ch341_private { spinlock_t lock; /* access lock */ - wait_queue_head_t delta_msr_wait; /* wait queue for modem status */ unsigned baud_rate; /* set baud rate */ u8 line_control; /* set line control value RTS/DTR */ u8 line_status; /* active status of modem control inputs */ @@ -252,7 +251,6 @@ static int ch341_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); priv->baud_rate = DEFAULT_BAUD_RATE; priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; @@ -298,7 +296,7 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on) priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); spin_unlock_irqrestore(&priv->lock, flags); ch341_set_handshake(port->serial->dev, priv->line_control); - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); } static void ch341_close(struct usb_serial_port *port) @@ -491,7 +489,7 @@ static void ch341_read_int_callback(struct urb *urb) tty_kref_put(tty); } - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); } exit: @@ -517,11 +515,14 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (!multi_change) { - interruptible_sleep_on(&priv->delta_msr_wait); + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; multi_change = priv->multi_status_change; -- cgit v1.2.3 From 356050d8b1e526db093e9d2c78daf49d6bf418e3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:13 +0100 Subject: USB: cypress_m8: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Also remove bogus test for private data pointer being NULL as it is never assigned in the loop. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cypress_m8.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 8efa19d0e9fb..ba7352e4187e 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -111,7 +111,6 @@ struct cypress_private { int baud_rate; /* stores current baud rate in integer form */ int isthrottled; /* if throttled, discard reads */ - wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */ char prev_status, diff_status; /* used for TIOCMIWAIT */ /* we pass a pointer to this as the argument sent to cypress_set_termios old_termios */ @@ -449,7 +448,6 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) kfree(priv); return -ENOMEM; } - init_waitqueue_head(&priv->delta_msr_wait); usb_reset_configuration(serial->dev); @@ -868,12 +866,16 @@ static int cypress_ioctl(struct tty_struct *tty, switch (cmd) { /* This code comes from drivers/char/serial.c and ftdi_sio.c */ case TIOCMIWAIT: - while (priv != NULL) { - interruptible_sleep_on(&priv->delta_msr_wait); + for (;;) { + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; - else { + + if (port->serial->disconnected) + return -EIO; + + { char diff = priv->diff_status; if (diff == 0) return -EIO; /* no change => error */ @@ -1187,7 +1189,7 @@ static void cypress_read_int_callback(struct urb *urb) if (priv->current_status != priv->prev_status) { priv->diff_status |= priv->current_status ^ priv->prev_status; - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); priv->prev_status = priv->current_status; } spin_unlock_irqrestore(&priv->lock, flags); -- cgit v1.2.3 From 508f940f1407656076a2e7d8f7fa059b567ecac2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:14 +0100 Subject: USB: f81232: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/f81232.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index b1b2dc64b50b..a172ad5c5ce8 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -47,7 +47,6 @@ MODULE_DEVICE_TABLE(usb, id_table); struct f81232_private { spinlock_t lock; - wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; }; @@ -111,7 +110,7 @@ static void f81232_process_read_urb(struct urb *urb) line_status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); if (!urb->actual_length) return; @@ -256,11 +255,14 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - interruptible_sleep_on(&priv->delta_msr_wait); + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); @@ -322,7 +324,6 @@ static int f81232_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); -- cgit v1.2.3 From 71ccb9b01981fabae27d3c98260ea4613207618e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:15 +0100 Subject: USB: ftdi_sio: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. When switching to tty ports, some lifetime assumptions were changed. Specifically, close can now be called before the final tty reference is dropped as part of hangup at device disconnect. Even with the ftdi private-data refcounting this means that the port private data can be freed while a process is sleeping on modem-status changes and thus cannot be relied on to detect disconnects when woken up. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index edd162df49ca..d4809d551473 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -69,9 +69,7 @@ struct ftdi_private { int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ struct async_icount icount; - wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ char prev_status; /* Used for TIOCMIWAIT */ - bool dev_gone; /* Used to abort TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ __u16 interface; /* FT2232C, FT2232H or FT4232H port interface (0 for FT232/245) */ @@ -1691,10 +1689,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) kref_init(&priv->kref); mutex_init(&priv->cfg_lock); - init_waitqueue_head(&priv->delta_msr_wait); priv->flags = ASYNC_LOW_LATENCY; - priv->dev_gone = false; if (quirk && quirk->port_probe) quirk->port_probe(priv); @@ -1840,8 +1836,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - priv->dev_gone = true; - wake_up_interruptible_all(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); remove_sysfs_attrs(port); @@ -1989,7 +1984,7 @@ static int ftdi_process_packet(struct usb_serial_port *port, if (diff_status & FTDI_RS0_RLSD) priv->icount.dcd++; - wake_up_interruptible_all(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); priv->prev_status = status; } @@ -2440,11 +2435,15 @@ static int ftdi_ioctl(struct tty_struct *tty, */ case TIOCMIWAIT: cprev = priv->icount; - while (!priv->dev_gone) { - interruptible_sleep_on(&priv->delta_msr_wait); + for (;;) { + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + cnow = priv->icount; if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || @@ -2454,8 +2453,6 @@ static int ftdi_ioctl(struct tty_struct *tty, } cprev = cnow; } - return -EIO; - break; case TIOCSERGETLSR: return get_lsr_info(port, (struct serial_struct __user *)arg); break; -- cgit v1.2.3 From 333576255d4cfc53efd056aad438568184b36af6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:16 +0100 Subject: USB: io_edgeport: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_edgeport.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index b00e5cbf741f..efd8b978128c 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -110,7 +110,6 @@ struct edgeport_port { wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ - wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ @@ -884,7 +883,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) /* initialize our wait queues */ init_waitqueue_head(&edge_port->wait_open); init_waitqueue_head(&edge_port->wait_chase); - init_waitqueue_head(&edge_port->delta_msr_wait); init_waitqueue_head(&edge_port->wait_command); /* initialize our icount structure */ @@ -1669,13 +1667,17 @@ static int edge_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); cprev = edge_port->icount; while (1) { - prepare_to_wait(&edge_port->delta_msr_wait, + prepare_to_wait(&port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE); schedule(); - finish_wait(&edge_port->delta_msr_wait, &wait); + finish_wait(&port->delta_msr_wait, &wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + cnow = edge_port->icount; if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) @@ -2051,7 +2053,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) icount->dcd++; if (newMsr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&edge_port->delta_msr_wait); + wake_up_interruptible(&edge_port->port->delta_msr_wait); } /* Save the new modem status */ -- cgit v1.2.3 From 7b2459690584f239650a365f3411ba2ec1c6d1e0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:17 +0100 Subject: USB: io_ti: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index d7d3c0e7cd27..7777172206de 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -87,9 +87,6 @@ struct edgeport_port { int close_pending; int lsr_event; struct async_icount icount; - wait_queue_head_t delta_msr_wait; /* for handling sleeping while - waiting for msr change to - happen */ struct edgeport_serial *edge_serial; struct usb_serial_port *port; __u8 bUartMode; /* Port type, 0: RS232, etc. */ @@ -1459,7 +1456,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) icount->dcd++; if (msr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&edge_port->delta_msr_wait); + wake_up_interruptible(&edge_port->port->delta_msr_wait); } /* Save the new modem status */ @@ -1754,7 +1751,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) dev = port->serial->dev; memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); - init_waitqueue_head(&edge_port->delta_msr_wait); /* turn off loopback */ status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0); @@ -2434,10 +2430,14 @@ static int edge_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = edge_port->icount; while (1) { - interruptible_sleep_on(&edge_port->delta_msr_wait); + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + cnow = edge_port->icount; if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) -- cgit v1.2.3 From cf1d24443677a0758cfa88ca40f24858b89261c0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:18 +0100 Subject: USB: mct_u232: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mct_u232.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a64d420f687b..06d5a60be2c4 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -114,8 +114,6 @@ struct mct_u232_private { unsigned char last_msr; /* Modem Status Register */ unsigned int rx_flags; /* Throttling flags */ struct async_icount icount; - wait_queue_head_t msr_wait; /* for handling sleeping while waiting - for msr change to happen */ }; #define THROTTLED 0x01 @@ -409,7 +407,6 @@ static int mct_u232_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->msr_wait); usb_set_serial_port_data(port, priv); @@ -601,7 +598,7 @@ static void mct_u232_read_int_callback(struct urb *urb) tty_kref_put(tty); } #endif - wake_up_interruptible(&priv->msr_wait); + wake_up_interruptible(&port->delta_msr_wait); spin_unlock_irqrestore(&priv->lock, flags); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -810,13 +807,17 @@ static int mct_u232_ioctl(struct tty_struct *tty, cprev = mct_u232_port->icount; spin_unlock_irqrestore(&mct_u232_port->lock, flags); for ( ; ; ) { - prepare_to_wait(&mct_u232_port->msr_wait, + prepare_to_wait(&port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE); schedule(); - finish_wait(&mct_u232_port->msr_wait, &wait); + finish_wait(&port->delta_msr_wait, &wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&mct_u232_port->lock, flags); cnow = mct_u232_port->icount; spin_unlock_irqrestore(&mct_u232_port->lock, flags); -- cgit v1.2.3 From e670c6af12517d08a403487b1122eecf506021cf Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:19 +0100 Subject: USB: mos7840: fix broken TIOCMIWAIT Make sure waiting processes are woken on modem-status changes. Currently processes are only woken on termios changes regardless of whether the modem status has changed. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 809fb329eca5..1b83b01dfb77 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -423,6 +423,9 @@ static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) icount->rng++; smp_wmb(); } + + mos7840_port->delta_msr_cond = 1; + wake_up_interruptible(&mos7840_port->delta_msr_wait); } } @@ -2017,8 +2020,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, mos7840_port->read_urb_busy = false; } } - wake_up(&mos7840_port->delta_msr_wait); - mos7840_port->delta_msr_cond = 1; dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__, mos7840_port->shadowLCR); } -- cgit v1.2.3 From a14430db686b8e459e1cf070a6ecf391515c9ab9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:20 +0100 Subject: USB: mos7840: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 1b83b01dfb77..b8051fa61911 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -219,7 +219,6 @@ struct moschip_port { char open; char open_ports; wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ - wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ int delta_msr_cond; struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ @@ -425,7 +424,7 @@ static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) } mos7840_port->delta_msr_cond = 1; - wake_up_interruptible(&mos7840_port->delta_msr_wait); + wake_up_interruptible(&port->port->delta_msr_wait); } } @@ -1130,7 +1129,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) /* initialize our wait queues */ init_waitqueue_head(&mos7840_port->wait_chase); - init_waitqueue_head(&mos7840_port->delta_msr_wait); /* initialize our icount structure */ memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); @@ -2220,13 +2218,18 @@ static int mos7840_ioctl(struct tty_struct *tty, while (1) { /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ mos7840_port->delta_msr_cond = 0; - wait_event_interruptible(mos7840_port->delta_msr_wait, - (mos7840_port-> + wait_event_interruptible(port->delta_msr_wait, + (port->serial->disconnected || + mos7840_port-> delta_msr_cond == 1)); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + cnow = mos7840_port->icount; smp_rmb(); if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && -- cgit v1.2.3 From 8edfdab37157d2683e51b8be5d3d5697f66a9f7b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:21 +0100 Subject: USB: oti6858: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/oti6858.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index a958fd41b5b3..87c71ccfee87 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -188,7 +188,6 @@ struct oti6858_private { u8 setup_done; struct delayed_work delayed_setup_work; - wait_queue_head_t intr_wait; struct usb_serial_port *port; /* USB port with which associated */ }; @@ -339,7 +338,6 @@ static int oti6858_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->intr_wait); priv->port = port; INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); @@ -664,11 +662,15 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - wait_event_interruptible(priv->intr_wait, + wait_event_interruptible(port->delta_msr_wait, + port->serial->disconnected || priv->status.pin_state != prev); if (signal_pending(current)) return -ERESTARTSYS; + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&priv->lock, flags); status = priv->status.pin_state & PIN_MASK; spin_unlock_irqrestore(&priv->lock, flags); @@ -763,7 +765,7 @@ static void oti6858_read_int_callback(struct urb *urb) if (!priv->transient) { if (xs->pin_state != priv->status.pin_state) - wake_up_interruptible(&priv->intr_wait); + wake_up_interruptible(&port->delta_msr_wait); memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE); } -- cgit v1.2.3 From 40509ca982c00c4b70fc00be887509feca0bff15 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:22 +0100 Subject: USB: pl2303: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 54adc9125e5c..3b10018d89a3 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -139,7 +139,6 @@ struct pl2303_serial_private { struct pl2303_private { spinlock_t lock; - wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; }; @@ -233,7 +232,6 @@ static int pl2303_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); @@ -607,11 +605,14 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - interruptible_sleep_on(&priv->delta_msr_wait); + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); @@ -719,7 +720,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port, spin_unlock_irqrestore(&priv->lock, flags); if (priv->line_status & UART_BREAK_ERROR) usb_serial_handle_break(port); - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); tty = tty_port_tty_get(&port->port); if (!tty) @@ -783,7 +784,7 @@ static void pl2303_process_read_urb(struct urb *urb) line_status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); if (!urb->actual_length) return; -- cgit v1.2.3 From 69f87f40d2b98e8b4ab82a121fd2bd584690b887 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:23 +0100 Subject: USB: quatech2: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/quatech2.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index d643a4d4d770..75f125ddb0c9 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -128,7 +128,6 @@ struct qt2_port_private { u8 shadowLSR; u8 shadowMSR; - wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ struct async_icount icount; struct usb_serial_port *port; @@ -506,8 +505,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - wait_event_interruptible(priv->delta_msr_wait, - ((priv->icount.rng != prev.rng) || + wait_event_interruptible(port->delta_msr_wait, + (port->serial->disconnected || + (priv->icount.rng != prev.rng) || (priv->icount.dsr != prev.dsr) || (priv->icount.dcd != prev.dcd) || (priv->icount.cts != prev.cts))); @@ -515,6 +515,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) if (signal_pending(current)) return -ERESTARTSYS; + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&priv->lock, flags); cur = priv->icount; spin_unlock_irqrestore(&priv->lock, flags); @@ -827,7 +830,6 @@ static int qt2_port_probe(struct usb_serial_port *port) spin_lock_init(&port_priv->lock); spin_lock_init(&port_priv->urb_lock); - init_waitqueue_head(&port_priv->delta_msr_wait); port_priv->port = port; port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -970,7 +972,7 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) if (newMSR & UART_MSR_TERI) port_priv->icount.rng++; - wake_up_interruptible(&port_priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); } } -- cgit v1.2.3 From dbcea7615d8d7d58f6ff49d2c5568113f70effe9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:24 +0100 Subject: USB: spcp8x5: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/spcp8x5.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 91ff8e3bddbd..549ef68ff5fa 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -149,7 +149,6 @@ enum spcp8x5_type { struct spcp8x5_private { spinlock_t lock; enum spcp8x5_type type; - wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; }; @@ -179,7 +178,6 @@ static int spcp8x5_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); priv->type = type; usb_set_serial_port_data(port , priv); @@ -475,7 +473,7 @@ static void spcp8x5_process_read_urb(struct urb *urb) priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); /* wake up the wait for termios */ - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); if (!urb->actual_length) return; @@ -526,12 +524,15 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port, while (1) { /* wake up in bulk read */ - interruptible_sleep_on(&priv->delta_msr_wait); + interruptible_sleep_on(&port->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); -- cgit v1.2.3 From 43a66b4c417ad15f6d2f632ce67ad195bdf999e8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:25 +0100 Subject: USB: ssu100: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ssu100.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index b57cf841c5b6..4b2a19757b4d 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -61,7 +61,6 @@ struct ssu100_port_private { spinlock_t status_lock; u8 shadowLSR; u8 shadowMSR; - wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ struct async_icount icount; }; @@ -355,8 +354,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->status_lock, flags); while (1) { - wait_event_interruptible(priv->delta_msr_wait, - ((priv->icount.rng != prev.rng) || + wait_event_interruptible(port->delta_msr_wait, + (port->serial->disconnected || + (priv->icount.rng != prev.rng) || (priv->icount.dsr != prev.dsr) || (priv->icount.dcd != prev.dcd) || (priv->icount.cts != prev.cts))); @@ -364,6 +364,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) if (signal_pending(current)) return -ERESTARTSYS; + if (port->serial->disconnected) + return -EIO; + spin_lock_irqsave(&priv->status_lock, flags); cur = priv->icount; spin_unlock_irqrestore(&priv->status_lock, flags); @@ -445,7 +448,6 @@ static int ssu100_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->status_lock); - init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); @@ -537,7 +539,7 @@ static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) priv->icount.dcd++; if (msr & UART_MSR_TERI) priv->icount.rng++; - wake_up_interruptible(&priv->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); } } -- cgit v1.2.3 From fc98ab873aa3dbe783ce56a2ffdbbe7c7609521a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:26 +0100 Subject: USB: ti_usb_3410_5052: fix use-after-free in TIOCMIWAIT Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 39cb9b807c3c..73deb029fc05 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -74,7 +74,6 @@ struct ti_port { int tp_flags; int tp_closing_wait;/* in .01 secs */ struct async_icount tp_icount; - wait_queue_head_t tp_msr_wait; /* wait for msr change */ wait_queue_head_t tp_write_wait; struct ti_device *tp_tdev; struct usb_serial_port *tp_port; @@ -432,7 +431,6 @@ static int ti_port_probe(struct usb_serial_port *port) else tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; tport->tp_closing_wait = closing_wait; - init_waitqueue_head(&tport->tp_msr_wait); init_waitqueue_head(&tport->tp_write_wait); if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) { kfree(tport); @@ -784,9 +782,13 @@ static int ti_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = tport->tp_icount; while (1) { - interruptible_sleep_on(&tport->tp_msr_wait); + interruptible_sleep_on(&port->delta_msr_wait); if (signal_pending(current)) return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + cnow = tport->tp_icount; if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) @@ -1392,7 +1394,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) icount->dcd++; if (msr & TI_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&tport->tp_msr_wait); + wake_up_interruptible(&tport->tp_port->delta_msr_wait); spin_unlock_irqrestore(&tport->tp_lock, flags); } -- cgit v1.2.3