From 80cb9aee01245b38325dd84f1359b14a3f01f10d Mon Sep 17 00:00:00 2001 From: Randy Vinson Date: Fri, 20 Jan 2006 13:53:38 -0800 Subject: [PATCH] USB: EHCI for Freescale 83xx Adding a Host Mode USB driver for the Freescale 83xx. This driver supports both the Dual-Role (DR) controller and the Multi-Port-Host (MPH) controller present in the Freescale MPC8349. It has been tested with the MPC8349CDS reference system. This driver depends on platform support code for setting up the pins on the device package in a manner appropriate for the board in use. Note that this patch requires selecting the EHCI controller option under the USB Host menu. Signed-off-by: Randy Vinson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host/ehci-hcd.c') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9dd3d14c64f3..8730babb5771 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -891,6 +891,12 @@ MODULE_LICENSE ("GPL"); #include "ehci-pci.c" #endif -#if !defined(CONFIG_PCI) +#ifdef CONFIG_PPC_83xx +#include "ehci-fsl.c" +#endif + +#if !(defined(CONFIG_PCI) || \ + defined(CONFIG_PPC_83xx) \ + ) #error "missing bus glue for ehci-hcd" #endif -- cgit v1.2.3