From f584fa8c1fdc289f23f4948bd58f4e2281fb5ad5 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 9 Apr 2019 14:09:06 +0200 Subject: usb: gadget: udc: lpc32xx: properly setup phy interrupts Only INT_VBUS_VLD is set to generate ATX interrupts on the phy but INT_SESS_VLD is checked in vbus_work. This leads to cases where hot-plugging USB doesn't work after boot. Signed-off-by: Alexandre Belloni Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/lpc32xx_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 777279fa4637..12f2d76e50fe 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -604,11 +604,11 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc) i2c_smbus_write_byte_data(udc->isp1301_i2c_client, ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); i2c_smbus_write_byte_data(udc->isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_FALLING, INT_VBUS_VLD); + ISP1301_I2C_INTERRUPT_FALLING, INT_SESS_VLD | INT_VBUS_VLD); i2c_smbus_write_byte_data(udc->isp1301_i2c_client, ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); i2c_smbus_write_byte_data(udc->isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD); + ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD); dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00)); -- cgit v1.2.3