From 112bf24471b50f806cbcbead7bd485da70401b83 Mon Sep 17 00:00:00 2001 From: Sylvain Rochet Date: Thu, 12 Feb 2015 18:54:07 +0100 Subject: usb: gadget: atmel_usba_udc: Add suspend/resume with wakeup support This patch add suspend/resume with wakeup support for Atmel USBA. On suspend: We stay continuously clocked if Vbus signal is not available. If Vbus signal is available we set the Vbus signal as a wake up source then we stop the USBA itself and all clocks used by USBA. On resume: We recover clocks and USBA if we stopped them. If a device is currently connected at resume time we enable the controller. Signed-off-by: Sylvain Rochet Acked-by: Boris Brezillon Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 57 +++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'drivers/usb/gadget/udc') diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 999e2f2cd2cc..d019b6c9d74d 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -2177,6 +2177,7 @@ static int usba_udc_probe(struct platform_device *pdev) ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (ret) return ret; + device_init_wakeup(&pdev->dev, 1); usba_init_debugfs(udc); for (i = 1; i < udc->num_ep; i++) @@ -2192,6 +2193,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev) udc = platform_get_drvdata(pdev); + device_init_wakeup(&pdev->dev, 0); usb_del_gadget_udc(&udc->gadget); for (i = 1; i < udc->num_ep; i++) @@ -2201,10 +2203,65 @@ static int __exit usba_udc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int usba_udc_suspend(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + mutex_lock(&udc->vbus_mutex); + + if (!device_may_wakeup(dev)) { + usba_stop(udc); + goto out; + } + + /* + * Device may wake up. We stay clocked if we failed + * to request vbus irq, assuming always on. + */ + if (gpio_is_valid(udc->vbus_pin)) { + usba_stop(udc); + enable_irq_wake(gpio_to_irq(udc->vbus_pin)); + } + +out: + mutex_unlock(&udc->vbus_mutex); + return 0; +} + +static int usba_udc_resume(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + if (device_may_wakeup(dev) && gpio_is_valid(udc->vbus_pin)) + disable_irq_wake(gpio_to_irq(udc->vbus_pin)); + + /* If Vbus is present, enable the controller and wait for reset */ + mutex_lock(&udc->vbus_mutex); + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) + usba_start(udc); + mutex_unlock(&udc->vbus_mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume); + static struct platform_driver udc_driver = { .remove = __exit_p(usba_udc_remove), .driver = { .name = "atmel_usba_udc", + .pm = &usba_udc_pm_ops, .of_match_table = of_match_ptr(atmel_udc_dt_ids), }, }; -- cgit v1.2.3