From fe6b540ac033be6e9fa00dab1c8902dea0ad4016 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 25 Jun 2011 02:04:33 +0800 Subject: serial/imx: get rid of the uses of cpu_is_mx1() The patch removes all the uses of cpu_is_mx1(). Instead, it uses the .id_table of platform_driver to distinguish the uart device type, IMX1_UART and IMX21_UART. The IMX21_UART type runs on all i.mx except i.mx1. A couple of !cpu_is_mx1 logic gets turned into is_imx21_uart, as the codes wrapped there are really IMX21 type uart specific. It also removes macro MX1_UCR3_REF25 and MX1_UCR3_REF30 which are not used anywhere. Signed-off-by: Shawn Guo Cc: Sascha Hauer Cc: Alan Cox Cc: Greg Kroah-Hartman Acked-by: Grant Likely --- drivers/tty/serial/imx.c | 85 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 69 insertions(+), 16 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 22fe801cce31..2d5eac20c5cd 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -48,7 +48,6 @@ #include #include -#include #include /* Register definitions */ @@ -66,8 +65,9 @@ #define UBIR 0xa4 /* BRM Incremental Register */ #define UBMR 0xa8 /* BRM Modulator Register */ #define UBRC 0xac /* Baud Rate Count Register */ -#define MX2_ONEMS 0xb0 /* One Millisecond register */ -#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */ +#define IMX21_ONEMS 0xb0 /* One Millisecond register */ +#define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */ +#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/ /* UART Control Register Bit Fields.*/ #define URXD_CHARRDY (1<<15) @@ -87,7 +87,7 @@ #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ #define UCR1_SNDBRK (1<<4) /* Send break */ #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */ +#define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */ #define UCR1_DOZE (1<<1) /* Doze */ #define UCR1_UARTEN (1<<0) /* UART enabled */ #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ @@ -113,9 +113,7 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ -#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ -#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ +#define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */ #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ #define UCR3_BPEN (1<<0) /* Preset registers enable */ #define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ @@ -181,6 +179,18 @@ #define UART_NR 8 +/* i.mx21 type uart runs on all i.mx except i.mx1 */ +enum imx_uart_type { + IMX1_UART, + IMX21_UART, +}; + +/* device type dependent stuff */ +struct imx_uart_data { + unsigned uts_reg; + enum imx_uart_type devtype; +}; + struct imx_port { struct uart_port port; struct timer_list timer; @@ -192,6 +202,7 @@ struct imx_port { unsigned int irda_inv_tx:1; unsigned short trcv_delay; /* transceiver delay */ struct clk *clk; + struct imx_uart_data *devdata; }; #ifdef CONFIG_IRDA @@ -200,6 +211,45 @@ struct imx_port { #define USE_IRDA(sport) (0) #endif +static struct imx_uart_data imx_uart_devdata[] = { + [IMX1_UART] = { + .uts_reg = IMX1_UTS, + .devtype = IMX1_UART, + }, + [IMX21_UART] = { + .uts_reg = IMX21_UTS, + .devtype = IMX21_UART, + }, +}; + +static struct platform_device_id imx_uart_devtype[] = { + { + .name = "imx1-uart", + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART], + }, { + .name = "imx21-uart", + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART], + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, imx_uart_devtype); + +static inline unsigned uts_reg(struct imx_port *sport) +{ + return sport->devdata->uts_reg; +} + +static inline int is_imx1_uart(struct imx_port *sport) +{ + return sport->devdata->devtype == IMX1_UART; +} + +static inline int is_imx21_uart(struct imx_port *sport) +{ + return sport->devdata->devtype == IMX21_UART; +} + /* * Handle any change of modem status signal since we were last called. */ @@ -326,7 +376,8 @@ static inline void imx_transmit_buffer(struct imx_port *sport) struct circ_buf *xmit = &sport->port.state->xmit; while (!uart_circ_empty(xmit) && - !(readl(sport->port.membase + UTS) & UTS_TXFULL)) { + !(readl(sport->port.membase + uts_reg(sport)) + & UTS_TXFULL)) { /* send xmit->buf[xmit->tail] * out the port here */ writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); @@ -373,7 +424,7 @@ static void imx_start_tx(struct uart_port *port) writel(temp, sport->port.membase + UCR4); } - if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) + if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY) imx_transmit_buffer(sport); } @@ -689,9 +740,9 @@ static int imx_startup(struct uart_port *port) } } - if (!cpu_is_mx1()) { + if (is_imx21_uart(sport)) { temp = readl(sport->port.membase + UCR3); - temp |= MX2_UCR3_RXDMUXSEL; + temp |= IMX21_UCR3_RXDMUXSEL; writel(temp, sport->port.membase + UCR3); } @@ -923,9 +974,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, writel(num, sport->port.membase + UBIR); writel(denom, sport->port.membase + UBMR); - if (!cpu_is_mx1()) + if (is_imx21_uart(sport)) writel(sport->port.uartclk / div / 1000, - sport->port.membase + MX2_ONEMS); + sport->port.membase + IMX21_ONEMS); writel(old_ucr1, sport->port.membase + UCR1); @@ -1041,7 +1092,7 @@ static void imx_console_putchar(struct uart_port *port, int ch) { struct imx_port *sport = (struct imx_port *)port; - while (readl(sport->port.membase + UTS) & UTS_TXFULL) + while (readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL) barrier(); writel(ch, sport->port.membase + URTX0); @@ -1062,8 +1113,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count) ucr1 = old_ucr1 = readl(sport->port.membase + UCR1); old_ucr2 = readl(sport->port.membase + UCR2); - if (cpu_is_mx1()) - ucr1 |= MX1_UCR1_UARTCLKEN; + if (is_imx1_uart(sport)) + ucr1 |= IMX1_UCR1_UARTCLKEN; ucr1 |= UCR1_UARTEN; ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); @@ -1262,6 +1313,7 @@ static int serial_imx_probe(struct platform_device *pdev) init_timer(&sport->timer); sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; + sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data; sport->clk = clk_get(&pdev->dev, "uart"); if (IS_ERR(sport->clk)) { @@ -1340,6 +1392,7 @@ static struct platform_driver serial_imx_driver = { .suspend = serial_imx_suspend, .resume = serial_imx_resume, + .id_table = imx_uart_devtype, .driver = { .name = "imx-uart", .owner = THIS_MODULE, -- cgit v1.2.3