From ba44dc04300441b47618f9933bf36e75a280e5fe Mon Sep 17 00:00:00 2001 From: Sugaya Taichi Date: Mon, 15 Apr 2019 20:31:40 +0900 Subject: serial: Add Milbeaut serial control Add Milbeaut serial control including earlycon and console. Signed-off-by: Sugaya Taichi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 26 ++ drivers/tty/serial/Makefile | 1 + drivers/tty/serial/milbeaut_usio.c | 621 +++++++++++++++++++++++++++++++++++++ 3 files changed, 648 insertions(+) create mode 100644 drivers/tty/serial/milbeaut_usio.c (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 6d0ab0399a72..14768ad0307e 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1580,6 +1580,32 @@ config SERIAL_RDA_CONSOLE Say 'Y' here if you wish to use the RDA8810PL UART as the system console. Only earlycon is implemented currently. +config SERIAL_MILBEAUT_USIO + tristate "Milbeaut USIO/UART serial port support" + depends on ARCH_MILBEAUT || (COMPILE_TEST && OF) + default ARCH_MILBEAUT + select SERIAL_CORE + help + This selects the USIO/UART IP found in Socionext Milbeaut SoCs. + +config SERIAL_MILBEAUT_USIO_PORTS + int "Maximum number of CSIO/UART ports (1-8)" + range 1 8 + depends on SERIAL_MILBEAUT_USIO + default "4" + +config SERIAL_MILBEAUT_USIO_CONSOLE + bool "Support for console on MILBEAUT USIO/UART serial port" + depends on SERIAL_MILBEAUT_USIO=y + default y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut + SoCs as the system console (the system console is the device which + receives all kernel messages and warnings and which allows logins in + single user mode). + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 40b702aaa85e..43ca2d0edde8 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -92,6 +92,7 @@ obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o obj-$(CONFIG_SERIAL_OWL) += owl-uart.o obj-$(CONFIG_SERIAL_RDA) += rda-uart.o +obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c new file mode 100644 index 000000000000..d303b7d4bb20 --- /dev/null +++ b/drivers/tty/serial/milbeaut_usio.c @@ -0,0 +1,621 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Socionext Inc. + */ + +#if defined(CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USIO_NAME "mlb-usio-uart" +#define USIO_UART_DEV_NAME "ttyUSI" + +static struct uart_port mlb_usio_ports[CONFIG_SERIAL_MILBEAUT_USIO_PORTS]; + +#define RX 0 +#define TX 1 +static int mlb_usio_irq[CONFIG_SERIAL_MILBEAUT_USIO_PORTS][2]; + +#define MLB_USIO_REG_SMR 0 +#define MLB_USIO_REG_SCR 1 +#define MLB_USIO_REG_ESCR 2 +#define MLB_USIO_REG_SSR 3 +#define MLB_USIO_REG_DR 4 +#define MLB_USIO_REG_BGR 6 +#define MLB_USIO_REG_FCR 12 +#define MLB_USIO_REG_FBYTE 14 + +#define MLB_USIO_SMR_SOE BIT(0) +#define MLB_USIO_SMR_SBL BIT(3) +#define MLB_USIO_SCR_TXE BIT(0) +#define MLB_USIO_SCR_RXE BIT(1) +#define MLB_USIO_SCR_TBIE BIT(2) +#define MLB_USIO_SCR_TIE BIT(3) +#define MLB_USIO_SCR_RIE BIT(4) +#define MLB_USIO_SCR_UPCL BIT(7) +#define MLB_USIO_ESCR_L_8BIT 0 +#define MLB_USIO_ESCR_L_5BIT 1 +#define MLB_USIO_ESCR_L_6BIT 2 +#define MLB_USIO_ESCR_L_7BIT 3 +#define MLB_USIO_ESCR_P BIT(3) +#define MLB_USIO_ESCR_PEN BIT(4) +#define MLB_USIO_ESCR_FLWEN BIT(7) +#define MLB_USIO_SSR_TBI BIT(0) +#define MLB_USIO_SSR_TDRE BIT(1) +#define MLB_USIO_SSR_RDRF BIT(2) +#define MLB_USIO_SSR_ORE BIT(3) +#define MLB_USIO_SSR_FRE BIT(4) +#define MLB_USIO_SSR_PE BIT(5) +#define MLB_USIO_SSR_REC BIT(7) +#define MLB_USIO_SSR_BRK BIT(8) +#define MLB_USIO_FCR_FE1 BIT(0) +#define MLB_USIO_FCR_FE2 BIT(1) +#define MLB_USIO_FCR_FCL1 BIT(2) +#define MLB_USIO_FCR_FCL2 BIT(3) +#define MLB_USIO_FCR_FSET BIT(4) +#define MLB_USIO_FCR_FTIE BIT(9) +#define MLB_USIO_FCR_FDRQ BIT(10) +#define MLB_USIO_FCR_FRIIE BIT(11) + +static void mlb_usio_stop_tx(struct uart_port *port) +{ + writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE, + port->membase + MLB_USIO_REG_FCR); + writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_TBIE, + port->membase + MLB_USIO_REG_SCR); +} + +static void mlb_usio_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int count; + + writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE, + port->membase + MLB_USIO_REG_FCR); + writeb(readb(port->membase + MLB_USIO_REG_SCR) & + ~(MLB_USIO_SCR_TIE | MLB_USIO_SCR_TBIE), + port->membase + MLB_USIO_REG_SCR); + + if (port->x_char) { + writew(port->x_char, port->membase + MLB_USIO_REG_DR); + port->icount.tx++; + port->x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mlb_usio_stop_tx(port); + return; + } + + count = port->fifosize - + (readw(port->membase + MLB_USIO_REG_FBYTE) & 0xff); + + do { + writew(xmit->buf[xmit->tail], port->membase + MLB_USIO_REG_DR); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + + } while (--count > 0); + + writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FDRQ, + port->membase + MLB_USIO_REG_FCR); + + writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE, + port->membase + MLB_USIO_REG_SCR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mlb_usio_stop_tx(port); +} + +static void mlb_usio_start_tx(struct uart_port *port) +{ + u16 fcr = readw(port->membase + MLB_USIO_REG_FCR); + + writew(fcr | MLB_USIO_FCR_FTIE, port->membase + MLB_USIO_REG_FCR); + if (!(fcr & MLB_USIO_FCR_FDRQ)) + return; + + writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE, + port->membase + MLB_USIO_REG_SCR); + + if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) + mlb_usio_tx_chars(port); +} + +static void mlb_usio_stop_rx(struct uart_port *port) +{ + writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_RIE, + port->membase + MLB_USIO_REG_SCR); +} + +static void mlb_usio_enable_ms(struct uart_port *port) +{ + writeb(readb(port->membase + MLB_USIO_REG_SCR) | + MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE, + port->membase + MLB_USIO_REG_SCR); +} + +static void mlb_usio_rx_chars(struct uart_port *port) +{ + struct tty_port *ttyport = &port->state->port; + unsigned long flag = 0; + char ch = 0; + u8 status; + int max_count = 2; + + while (max_count--) { + status = readb(port->membase + MLB_USIO_REG_SSR); + + if (!(status & MLB_USIO_SSR_RDRF)) + break; + + if (!(status & (MLB_USIO_SSR_ORE | MLB_USIO_SSR_FRE | + MLB_USIO_SSR_PE))) { + ch = readw(port->membase + MLB_USIO_REG_DR); + flag = TTY_NORMAL; + port->icount.rx++; + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, MLB_USIO_SSR_ORE, + ch, flag); + continue; + } + if (status & MLB_USIO_SSR_PE) + port->icount.parity++; + if (status & MLB_USIO_SSR_ORE) + port->icount.overrun++; + status &= port->read_status_mask; + if (status & MLB_USIO_SSR_BRK) { + flag = TTY_BREAK; + ch = 0; + } else + if (status & MLB_USIO_SSR_PE) { + flag = TTY_PARITY; + ch = 0; + } else + if (status & MLB_USIO_SSR_FRE) { + flag = TTY_FRAME; + ch = 0; + } + if (flag) + uart_insert_char(port, status, MLB_USIO_SSR_ORE, + ch, flag); + + writeb(readb(port->membase + MLB_USIO_REG_SSR) | + MLB_USIO_SSR_REC, + port->membase + MLB_USIO_REG_SSR); + + max_count = readw(port->membase + MLB_USIO_REG_FBYTE) >> 8; + writew(readw(port->membase + MLB_USIO_REG_FCR) | + MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, + port->membase + MLB_USIO_REG_FCR); + } + + tty_flip_buffer_push(ttyport); +} + +static irqreturn_t mlb_usio_rx_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + + spin_lock(&port->lock); + mlb_usio_rx_chars(port); + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t mlb_usio_tx_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + + spin_lock(&port->lock); + if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) + mlb_usio_tx_chars(port); + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int mlb_usio_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) ? + TIOCSER_TEMT : 0; +} + +static void mlb_usio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int mlb_usio_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + +} + +static void mlb_usio_break_ctl(struct uart_port *port, int break_state) +{ +} + +static int mlb_usio_startup(struct uart_port *port) +{ + const char *portname = to_platform_device(port->dev)->name; + unsigned long flags; + int ret, index = port->line; + unsigned char escr; + + ret = request_irq(mlb_usio_irq[index][RX], mlb_usio_rx_irq, + 0, portname, port); + if (ret) + return ret; + ret = request_irq(mlb_usio_irq[index][TX], mlb_usio_tx_irq, + 0, portname, port); + if (ret) { + free_irq(mlb_usio_irq[index][RX], port); + return ret; + } + + escr = readb(port->membase + MLB_USIO_REG_ESCR); + if (of_property_read_bool(port->dev->of_node, "auto-flow-control")) + escr |= MLB_USIO_ESCR_FLWEN; + spin_lock_irqsave(&port->lock, flags); + writeb(0, port->membase + MLB_USIO_REG_SCR); + writeb(escr, port->membase + MLB_USIO_REG_ESCR); + writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR); + writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR); + writew(0, port->membase + MLB_USIO_REG_FCR); + writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2, + port->membase + MLB_USIO_REG_FCR); + writew(MLB_USIO_FCR_FE1 | MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, + port->membase + MLB_USIO_REG_FCR); + writew(0, port->membase + MLB_USIO_REG_FBYTE); + writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE); + + writeb(MLB_USIO_SCR_TXE | MLB_USIO_SCR_RIE | MLB_USIO_SCR_TBIE | + MLB_USIO_SCR_RXE, port->membase + MLB_USIO_REG_SCR); + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void mlb_usio_shutdown(struct uart_port *port) +{ + int index = port->line; + + free_irq(mlb_usio_irq[index][RX], port); + free_irq(mlb_usio_irq[index][TX], port); +} + +static void mlb_usio_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + unsigned int escr, smr = MLB_USIO_SMR_SOE; + unsigned long flags, baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + escr = MLB_USIO_ESCR_L_5BIT; + break; + case CS6: + escr = MLB_USIO_ESCR_L_6BIT; + break; + case CS7: + escr = MLB_USIO_ESCR_L_7BIT; + break; + case CS8: + default: + escr = MLB_USIO_ESCR_L_8BIT; + break; + } + + if (termios->c_cflag & CSTOPB) + smr |= MLB_USIO_SMR_SBL; + + if (termios->c_cflag & PARENB) { + escr |= MLB_USIO_ESCR_PEN; + if (termios->c_cflag & PARODD) + escr |= MLB_USIO_ESCR_P; + } + /* Set hard flow control */ + if (of_property_read_bool(port->dev->of_node, "auto-flow-control") || + (termios->c_cflag & CRTSCTS)) + escr |= MLB_USIO_ESCR_FLWEN; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); + if (baud > 1) + quot = port->uartclk / baud - 1; + else + quot = 0; + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); + port->read_status_mask = MLB_USIO_SSR_ORE | MLB_USIO_SSR_RDRF | + MLB_USIO_SSR_TDRE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE; + + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE; + if ((termios->c_iflag & IGNBRK) && (termios->c_iflag & IGNPAR)) + port->ignore_status_mask |= MLB_USIO_SSR_ORE; + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= MLB_USIO_SSR_RDRF; + + writeb(0, port->membase + MLB_USIO_REG_SCR); + writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR); + writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR); + writew(0, port->membase + MLB_USIO_REG_FCR); + writeb(smr, port->membase + MLB_USIO_REG_SMR); + writeb(escr, port->membase + MLB_USIO_REG_ESCR); + writew(quot, port->membase + MLB_USIO_REG_BGR); + writew(0, port->membase + MLB_USIO_REG_FCR); + writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2 | MLB_USIO_FCR_FE1 | + MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, + port->membase + MLB_USIO_REG_FCR); + writew(0, port->membase + MLB_USIO_REG_FBYTE); + writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE); + writeb(MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE | MLB_USIO_SCR_TBIE | + MLB_USIO_SCR_TXE, port->membase + MLB_USIO_REG_SCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *mlb_usio_type(struct uart_port *port) +{ + return ((port->type == PORT_MLB_USIO) ? USIO_NAME : NULL); +} + +static void mlb_usio_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_MLB_USIO; +} + +static const struct uart_ops mlb_usio_ops = { + .tx_empty = mlb_usio_tx_empty, + .set_mctrl = mlb_usio_set_mctrl, + .get_mctrl = mlb_usio_get_mctrl, + .stop_tx = mlb_usio_stop_tx, + .start_tx = mlb_usio_start_tx, + .stop_rx = mlb_usio_stop_rx, + .enable_ms = mlb_usio_enable_ms, + .break_ctl = mlb_usio_break_ctl, + .startup = mlb_usio_startup, + .shutdown = mlb_usio_shutdown, + .set_termios = mlb_usio_set_termios, + .type = mlb_usio_type, + .config_port = mlb_usio_config_port, +}; + +#ifdef CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE + +static void mlb_usio_console_putchar(struct uart_port *port, int c) +{ + while (!(readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TDRE)) + cpu_relax(); + + writew(c, port->membase + MLB_USIO_REG_DR); +} + +static void mlb_usio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &mlb_usio_ports[co->index]; + + uart_console_write(port, s, count, mlb_usio_console_putchar); +} + +static int __init mlb_usio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int parity = 'n'; + int flow = 'n'; + int bits = 8; + + if (co->index >= CONFIG_SERIAL_MILBEAUT_USIO_PORTS) + return -ENODEV; + + port = &mlb_usio_ports[co->index]; + if (!port->membase) + return -ENODEV; + + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + if (of_property_read_bool(port->dev->of_node, "auto-flow-control")) + flow = 'r'; + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +static struct uart_driver mlb_usio_uart_driver; +static struct console mlb_usio_console = { + .name = USIO_UART_DEV_NAME, + .write = mlb_usio_console_write, + .device = uart_console_device, + .setup = mlb_usio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mlb_usio_uart_driver, +}; + +static int __init mlb_usio_console_init(void) +{ + register_console(&mlb_usio_console); + return 0; +} +console_initcall(mlb_usio_console_init); + + +static void mlb_usio_early_console_write(struct console *co, const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + uart_console_write(&dev->port, s, count, mlb_usio_console_putchar); +} + +static int __init mlb_usio_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + device->con->write = mlb_usio_early_console_write; + return 0; +} + +OF_EARLYCON_DECLARE(mlb_usio, "socionext,milbeaut-usio-uart", + mlb_usio_early_console_setup); + +#define USIO_CONSOLE (&mlb_usio_console) +#else +#define USIO_CONSOLE NULL +#endif + +static struct uart_driver mlb_usio_uart_driver = { + .owner = THIS_MODULE, + .driver_name = USIO_NAME, + .dev_name = USIO_UART_DEV_NAME, + .cons = USIO_CONSOLE, + .nr = CONFIG_SERIAL_MILBEAUT_USIO_PORTS, +}; + +static int mlb_usio_probe(struct platform_device *pdev) +{ + struct clk *clk = devm_clk_get(&pdev->dev, 0); + struct uart_port *port; + struct resource *res; + int index = 0; + int ret; + + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Missing clock\n"); + return PTR_ERR(clk); + } + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "Clock enable failed: %d\n", ret); + return ret; + } + of_property_read_u32(pdev->dev.of_node, "index", &index); + port = &mlb_usio_ports[index]; + + port->private_data = (void *)clk; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Missing regs\n"); + ret = -ENODEV; + goto failed; + } + port->mapbase = res->start; + port->membase = ioremap(res->start, (res->end - res->start + 1)); + port->membase = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + + ret = platform_get_irq_byname(pdev, "rx"); + mlb_usio_irq[index][RX] = ret; + + ret = platform_get_irq_byname(pdev, "tx"); + mlb_usio_irq[index][TX] = ret; + + port->irq = mlb_usio_irq[index][RX]; + port->uartclk = clk_get_rate(clk); + port->fifosize = 128; + port->iotype = UPIO_MEM32; + port->flags = UPF_BOOT_AUTOCONF | UPF_SPD_VHI; + port->line = index; + port->ops = &mlb_usio_ops; + port->dev = &pdev->dev; + + ret = uart_add_one_port(&mlb_usio_uart_driver, port); + if (ret) { + dev_err(&pdev->dev, "Adding port failed: %d\n", ret); + goto failed1; + } + return 0; + +failed1: + iounmap(port->membase); + +failed: + clk_disable_unprepare(clk); + clk_put(clk); + + return ret; +} + +static int mlb_usio_remove(struct platform_device *pdev) +{ + struct uart_port *port = &mlb_usio_ports[pdev->id]; + struct clk *clk = port->private_data; + + uart_remove_one_port(&mlb_usio_uart_driver, port); + clk_disable_unprepare(clk); + clk_put(clk); + + return 0; +} + +static const struct of_device_id mlb_usio_dt_ids[] = { + { .compatible = "socionext,milbeaut-usio-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids); + +static struct platform_driver mlb_usio_driver = { + .probe = mlb_usio_probe, + .remove = mlb_usio_remove, + .driver = { + .name = USIO_NAME, + .of_match_table = mlb_usio_dt_ids, + }, +}; + +static int __init mlb_usio_init(void) +{ + int ret = uart_register_driver(&mlb_usio_uart_driver); + + if (ret) { + pr_err("%s: uart registration failed: %d\n", __func__, ret); + return ret; + } + ret = platform_driver_register(&mlb_usio_driver); + if (ret) { + uart_unregister_driver(&mlb_usio_uart_driver); + pr_err("%s: drv registration failed: %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static void __exit mlb_usio_exit(void) +{ + platform_driver_unregister(&mlb_usio_driver); + uart_unregister_driver(&mlb_usio_uart_driver); +} + +module_init(mlb_usio_init); +module_exit(mlb_usio_exit); + +MODULE_AUTHOR("SOCIONEXT"); +MODULE_DESCRIPTION("MILBEAUT_USIO/UART Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3