From 87c5cbf71ecbb9e289d60a2df22eb686c70bf196 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Fri, 7 Feb 2020 11:53:35 +0200 Subject: serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE On AR934x this UART is usually not initialized by the bootloader as it is only used as a secondary serial port while the primary UART is a newly introduced NS16550-compatible. In order to make use of the ar933x-uart on AR934x without RTS/CTS hardware flow control, one needs to set the UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this UART is used as primary/console, the bootloader on AR934x typically doesn't set those bits. Setting them explicitely on AR933x should not do any harm, so just set them unconditionally. Tested-by: Chuanhong Guo Signed-off-by: Daniel Golle Link: https://lore.kernel.org/r/20200207095335.GA179836@makrotopia.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ar933x_uart.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 3bdd56a1021b..ea12f10610b6 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -286,6 +286,10 @@ static void ar933x_uart_set_termios(struct uart_port *port, ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, AR933X_UART_CS_HOST_INT_EN); + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + /* reenable the UART */ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S, @@ -418,6 +422,10 @@ static int ar933x_uart_startup(struct uart_port *port) ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, AR933X_UART_CS_HOST_INT_EN); + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + /* Enable RX interrupts */ up->ier = AR933X_UART_INT_RX_VALID; ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); -- cgit v1.2.3 From 04b5bfe3dc94e64d0590c54045815cb5183fb095 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 10 Feb 2020 16:20:53 +0100 Subject: tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode In atmel_shutdown() we call atmel_stop_rx() and atmel_stop_tx() functions. Prevent the rx restart that is implemented in RS485 or ISO7816 modes when calling atmel_stop_tx() by using the atomic information tasklet_shutdown that is already in place for this purpose. Fixes: 98f2082c3ac4 ("tty/serial: atmel: enforce tasklet init and termination sequences") Signed-off-by: Nicolas Ferre Cc: stable Link: https://lore.kernel.org/r/20200210152053.8289-1-nicolas.ferre@microchip.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index c15c398c88a9..a39c87a7c2e1 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -570,7 +570,8 @@ static void atmel_stop_tx(struct uart_port *port) atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); if (atmel_uart_is_half_duplex(port)) - atmel_start_rx(port); + if (!atomic_read(&atmel_port->tasklet_shutdown)) + atmel_start_rx(port); } -- cgit v1.2.3 From 1f69a1273b3f204a9c00dc3bbdcc4afcd0787428 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sun, 9 Feb 2020 19:44:15 +0300 Subject: tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started It is possible to get an instant RX timeout or end-of-transfer interrupt before RX DMA was started, if transaction is less than 16 bytes. Transfer should be handled in PIO mode in this case because DMA can't handle it. This patch brings back the original behaviour of the driver that was changed by accident by a previous commit, it fixes occasional Bluetooth HW initialization failures which I started to notice recently. Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request") Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20200209164415.9632-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 33034b852a51..8de8bac9c6c7 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -692,11 +692,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, count, DMA_TO_DEVICE); } +static void do_handle_rx_pio(struct tegra_uart_port *tup) +{ + struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); + struct tty_port *port = &tup->uport.state->port; + + tegra_uart_handle_rx_pio(tup, port); + if (tty) { + tty_flip_buffer_push(port); + tty_kref_put(tty); + } +} + static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup, unsigned int residue) { struct tty_port *port = &tup->uport.state->port; - struct tty_struct *tty = tty_port_tty_get(port); unsigned int count; async_tx_ack(tup->rx_dma_desc); @@ -705,11 +716,7 @@ static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup, /* If we are here, DMA is stopped */ tegra_uart_copy_rx_to_tty(tup, port, count); - tegra_uart_handle_rx_pio(tup, port); - if (tty) { - tty_flip_buffer_push(port); - tty_kref_put(tty); - } + do_handle_rx_pio(tup); } static void tegra_uart_rx_dma_complete(void *args) @@ -749,8 +756,10 @@ static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup) { struct dma_tx_state state; - if (!tup->rx_dma_active) + if (!tup->rx_dma_active) { + do_handle_rx_pio(tup); return; + } dmaengine_terminate_all(tup->rx_dma_chan); dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); @@ -816,18 +825,6 @@ static void tegra_uart_handle_modem_signal_change(struct uart_port *u) uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS); } -static void do_handle_rx_pio(struct tegra_uart_port *tup) -{ - struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); - struct tty_port *port = &tup->uport.state->port; - - tegra_uart_handle_rx_pio(tup, port); - if (tty) { - tty_flip_buffer_push(port); - tty_kref_put(tty); - } -} - static irqreturn_t tegra_uart_isr(int irq, void *data) { struct tegra_uart_port *tup = data; -- cgit v1.2.3 From f76707831829530ffdd3888bebc108aecefccaa0 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Tue, 11 Feb 2020 14:16:01 +0800 Subject: tty: serial: imx: setup the correct sg entry for tx dma MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by: Eagle Zhou Tested-by: Eagle Zhou Signed-off-by: Fugang Duan Cc: stable Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 0c6c63166250..d337782b3648 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -599,7 +599,7 @@ static void imx_uart_dma_tx(struct imx_port *sport) sport->tx_bytes = uart_circ_chars_pending(xmit); - if (xmit->tail < xmit->head) { + if (xmit->tail < xmit->head || xmit->head == 0) { sport->dma_tx_nents = 1; sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); } else { -- cgit v1.2.3 From 7febbcbc48fc92e3f33863b32ed715ba4aff18c4 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 11 Feb 2020 15:55:59 +0200 Subject: serial: 8250: Check UPF_IRQ_SHARED in advance The commit 54e53b2e8081 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[] irq_default_primary_handler threaded [] serial8250_interrupt |Disabling IRQ #85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f04937b3e ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing Cc: Kurt Kanzenbach Cc: Vikram Pandita Signed-off-by: Andy Shevchenko Cc: stable Acked-by: Kurt Kanzenbach Link: https://lore.kernel.org/r/20200211135559.85960-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_aspeed_vuart.c | 1 - drivers/tty/serial/8250/8250_core.c | 5 ++--- drivers/tty/serial/8250/8250_of.c | 1 - drivers/tty/serial/8250/8250_port.c | 4 ++++ 4 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index d657aa14c3e4..c33e02cbde93 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -446,7 +446,6 @@ static int aspeed_vuart_probe(struct platform_device *pdev) port.port.line = rc; port.port.irq = irq_of_parse_and_map(np, 0); - port.port.irqflags = IRQF_SHARED; port.port.handle_irq = aspeed_vuart_handle_irq; port.port.iotype = UPIO_MEM; port.port.type = PORT_16550A; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 0894a22fd702..f2a33c9082a6 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -174,7 +174,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up) struct hlist_head *h; struct hlist_node *n; struct irq_info *i; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + int ret; mutex_lock(&hash_mutex); @@ -209,9 +209,8 @@ static int serial_link_irq_chain(struct uart_8250_port *up) INIT_LIST_HEAD(&up->list); i->head = &up->list; spin_unlock_irq(&i->lock); - irq_flags |= up->port.irqflags; ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, up->port.name, i); + up->port.irqflags, up->port.name, i); if (ret < 0) serial_do_unlink(i, up); } diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 531ad67395e0..f6687756ec5e 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -202,7 +202,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev, port->type = type; port->uartclk = clk; - port->irqflags |= IRQF_SHARED; if (of_property_read_bool(np, "no-loopback-test")) port->flags |= UPF_SKIP_TEST; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 430e3467aff7..0325f2e53b74 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2177,6 +2177,10 @@ int serial8250_do_startup(struct uart_port *port) } } + /* Check if we need to have shared IRQs */ + if (port->irq && (up->port.flags & UPF_SHARE_IRQ)) + up->port.irqflags |= IRQF_SHARED; + if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { unsigned char iir1; /* -- cgit v1.2.3 From 679aac5ead2f18d223554a52b543e1195e181811 Mon Sep 17 00:00:00 2001 From: satya priya Date: Tue, 11 Feb 2020 15:43:02 +0530 Subject: tty: serial: qcom_geni_serial: Fix RX cancel command failure RX cancel command fails when BT is switched on and off multiple times. To handle this, poll for the cancel bit in SE_GENI_S_IRQ_STATUS register instead of SE_GENI_S_CMD_CTRL_REG. As per the HPG update, handle the RX last bit after cancel command and flush out the RX FIFO buffer. Signed-off-by: satya priya Cc: stable Link: https://lore.kernel.org/r/1581415982-8793-1-git-send-email-skakit@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/qcom_geni_serial.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 191abb18fc2a..0bd1684cabb3 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -129,6 +129,7 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop); static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop); static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port); static void qcom_geni_serial_stop_rx(struct uart_port *uport); +static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop); static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200, 32000000, 48000000, 64000000, 80000000, @@ -599,7 +600,7 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) u32 irq_en; u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport, uport); - u32 irq_clear = S_CMD_DONE_EN; + u32 s_irq_status; irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN); @@ -615,10 +616,19 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) return; geni_se_cancel_s_cmd(&port->se); - qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG, - S_GENI_CMD_CANCEL, false); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + /* + * If timeout occurs secondary engine remains active + * and Abort sequence is executed. + */ + s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + /* Flush the Rx buffer */ + if (s_irq_status & S_RX_FIFO_LAST_EN) + qcom_geni_serial_handle_rx(uport, true); + writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + status = readl(uport->membase + SE_GENI_STATUS); - writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR); if (status & S_GENI_CMD_ACTIVE) qcom_geni_serial_abort_rx(uport); } -- cgit v1.2.3 From 4508cf76b1ecdf20a456b6b161acbe78f3b23358 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Thu, 13 Feb 2020 12:43:42 +0100 Subject: serial: cpm_uart: call cpm_muram_init before registering console Christophe reports that powerpc 8xx silently fails to 5.6-rc1. It turns out I was wrong about nobody relying on the lazy initialization of the cpm/qe muram in commit b6231ea2b3c6 (soc: fsl: qe: drop broken lazy call of cpm_muram_init()). Rather than reinstating the somewhat dubious lazy call (initializing a currently held spinlock, and implicitly doing a GFP_KERNEL under that spinlock), make sure that cpm_muram_init() is called early enough - I thought the calls from the subsys_initcalls were good enough, but when used by console drivers, that's obviously not the case. cpm_muram_init() is safe to call twice (there's an early return if it is already initialized), so keep the call from cpm_init() - in case SERIAL_CPM_CONSOLE=n. Fixes: b6231ea2b3c6 (soc: fsl: qe: drop broken lazy call of cpm_muram_init()) Reported-by: Christophe Leroy Signed-off-by: Rasmus Villemoes Tested-by: Christophe Leroy Link: https://lore.kernel.org/r/20200213114342.21712-1-linux@rasmusvillemoes.dk Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 19d5a4cf29a6..d4b81b06e0cb 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1373,6 +1373,7 @@ static struct console cpm_scc_uart_console = { static int __init cpm_uart_console_init(void) { + cpm_muram_init(); register_console(&cpm_scc_uart_console); return 0; } -- cgit v1.2.3