From b7cf0053738c5491df532a625321e976eaa93b22 Mon Sep 17 00:00:00 2001 From: "dawei.chien@mediatek.com" Date: Thu, 18 Aug 2016 11:50:52 +0800 Subject: thermal: Add Mediatek thermal driver for mt2701. This patch adds support for mt2701 chip to mtk_thermal, and integrate both mt8173 and mt2701 on the same driver. MT8173 has four banks and five sensors, and MT2701 has only one bank and three sensors. Signed-off-by: Dawei Chien Signed-off-by: Zhang Rui --- drivers/thermal/mtk_thermal.c | 215 +++++++++++++++++++++++++++++------------- 1 file changed, 152 insertions(+), 63 deletions(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 262ab0a2266f..7b233c718e2e 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -2,6 +2,7 @@ * Copyright (c) 2015 MediaTek Inc. * Author: Hanyi Wu * Sascha Hauer + * Dawei Chien * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -88,6 +90,7 @@ #define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5) #define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit) +/* MT8173 thermal sensors */ #define MT8173_TS1 0 #define MT8173_TS2 1 #define MT8173_TS3 2 @@ -106,7 +109,12 @@ /* The number of sensing points per bank */ #define MT8173_NUM_SENSORS_PER_ZONE 4 -/* Layout of the fuses providing the calibration data */ +/* + * Layout of the fuses providing the calibration data + * These macros could be used for both MT8173 and MT2701. + * MT8173 has five sensors and need five VTS calibration data, + * and MT2701 has three sensors and need three VTS calibration data. + */ #define MT8173_CALIB_BUF0_VALID BIT(0) #define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) #define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff) @@ -117,24 +125,50 @@ #define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) #define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) +/* MT2701 thermal sensors */ +#define MT2701_TS1 0 +#define MT2701_TS2 1 +#define MT2701_TSABB 2 + +/* AUXADC channel 11 is used for the temperature sensors */ +#define MT2701_TEMP_AUXADC_CHANNEL 11 + +/* The total number of temperature sensors in the MT2701 */ +#define MT2701_NUM_SENSORS 3 + #define THERMAL_NAME "mtk-thermal" +/* The number of sensing points per bank */ +#define MT2701_NUM_SENSORS_PER_ZONE 3 + struct mtk_thermal; +struct thermal_bank_cfg { + unsigned int num_sensors; + const int *sensors; +}; + struct mtk_thermal_bank { struct mtk_thermal *mt; int id; }; +struct mtk_thermal_data { + s32 num_banks; + s32 num_sensors; + s32 auxadc_channel; + const int *sensor_mux_values; + const int *msr; + const int *adcpnp; + struct thermal_bank_cfg bank_data[]; +}; + struct mtk_thermal { struct device *dev; void __iomem *thermal_base; struct clk *clk_peri_therm; struct clk *clk_auxadc; - - struct mtk_thermal_bank banks[MT8173_NUM_ZONES]; - /* lock: for getting and putting banks */ struct mutex lock; @@ -144,16 +178,44 @@ struct mtk_thermal { s32 o_slope; s32 vts[MT8173_NUM_SENSORS]; + const struct mtk_thermal_data *conf; + struct mtk_thermal_bank banks[]; }; -struct mtk_thermal_bank_cfg { - unsigned int num_sensors; - unsigned int sensors[MT8173_NUM_SENSORS_PER_ZONE]; +/* MT8173 thermal sensor data */ +const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { + { MT8173_TS2, MT8173_TS3 }, + { MT8173_TS2, MT8173_TS4 }, + { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, + { MT8173_TS2 }, }; -static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; +const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2 +}; -/* +const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { + TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 +}; + +const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; + +/* MT2701 thermal sensor data */ +const int mt2701_bank_data[MT2701_NUM_SENSORS] = { + MT2701_TS1, MT2701_TS2, MT2701_TSABB +}; + +const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 +}; + +const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { + TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 +}; + +const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; + +/** * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 * temperature sensors. We use each bank to measure a certain area of the @@ -166,42 +228,53 @@ static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; * data, and this indeed needs the temperatures of the individual banks * for making better decisions. */ -static const struct mtk_thermal_bank_cfg bank_data[] = { - { - .num_sensors = 2, - .sensors = { MT8173_TS2, MT8173_TS3 }, - }, { - .num_sensors = 2, - .sensors = { MT8173_TS2, MT8173_TS4 }, - }, { - .num_sensors = 3, - .sensors = { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, - }, { - .num_sensors = 1, - .sensors = { MT8173_TS2 }, +static const struct mtk_thermal_data mt8173_thermal_data = { + .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL, + .num_banks = MT8173_NUM_ZONES, + .num_sensors = MT8173_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 2, + .sensors = mt8173_bank_data[0], + }, { + .num_sensors = 2, + .sensors = mt8173_bank_data[1], + }, { + .num_sensors = 3, + .sensors = mt8173_bank_data[2], + }, { + .num_sensors = 1, + .sensors = mt8173_bank_data[3], + }, }, + .msr = mt8173_msr, + .adcpnp = mt8173_adcpnp, + .sensor_mux_values = mt8173_mux_values, }; -struct mtk_thermal_sense_point { - int msr; - int adcpnp; -}; - -static const struct mtk_thermal_sense_point - sensing_points[MT8173_NUM_SENSORS_PER_ZONE] = { - { - .msr = TEMP_MSR0, - .adcpnp = TEMP_ADCPNP0, - }, { - .msr = TEMP_MSR1, - .adcpnp = TEMP_ADCPNP1, - }, { - .msr = TEMP_MSR2, - .adcpnp = TEMP_ADCPNP2, - }, { - .msr = TEMP_MSR3, - .adcpnp = TEMP_ADCPNP3, +/** + * The MT2701 thermal controller has one bank, which can read up to + * three temperature sensors simultaneously. The MT2701 has a total of 3 + * temperature sensors. + * + * The thermal core only gets the maximum temperature of this one bank, + * so the bank concept wouldn't be necessary here. However, the SVS (Smart + * Voltage Scaling) unit makes its decisions based on the same bank + * data. + */ +static const struct mtk_thermal_data mt2701_thermal_data = { + .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL, + .num_banks = 1, + .num_sensors = MT2701_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 3, + .sensors = mt2701_bank_data, + }, }, + .msr = mt2701_msr, + .adcpnp = mt2701_adcpnp, + .sensor_mux_values = mt2701_mux_values, }; /** @@ -270,13 +343,16 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) { struct mtk_thermal *mt = bank->mt; + const struct mtk_thermal_data *conf = mt->conf; int i, temp = INT_MIN, max = INT_MIN; u32 raw; - for (i = 0; i < bank_data[bank->id].num_sensors; i++) { - raw = readl(mt->thermal_base + sensing_points[i].msr); + for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { + raw = readl(mt->thermal_base + conf->msr[i]); - temp = raw_to_mcelsius(mt, bank_data[bank->id].sensors[i], raw); + temp = raw_to_mcelsius(mt, + conf->bank_data[bank->id].sensors[i], + raw); /* * The first read of a sensor often contains very high bogus @@ -299,7 +375,7 @@ static int mtk_read_temp(void *data, int *temperature) int i; int tempmax = INT_MIN; - for (i = 0; i < MT8173_NUM_ZONES; i++) { + for (i = 0; i < mt->conf->num_banks; i++) { struct mtk_thermal_bank *bank = &mt->banks[i]; mtk_thermal_get_bank(bank); @@ -322,7 +398,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, u32 apmixed_phys_base, u32 auxadc_phys_base) { struct mtk_thermal_bank *bank = &mt->banks[num]; - const struct mtk_thermal_bank_cfg *cfg = &bank_data[num]; + const struct mtk_thermal_data *conf = mt->conf; int i; bank->id = num; @@ -368,7 +444,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0) * automatically by hw */ - writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCMUX); + writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCMUX); /* AHB address for auxadc mux selection */ writel(auxadc_phys_base + AUXADC_CON1_CLR_V, @@ -379,18 +455,18 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, mt->thermal_base + TEMP_PNPMUXADDR); /* AHB value for auxadc enable */ - writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN); + writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCEN); /* AHB address for auxadc enable (channel 0 immediate mode selected) */ writel(auxadc_phys_base + AUXADC_CON1_SET_V, mt->thermal_base + TEMP_ADCENADDR); /* AHB address for auxadc valid bit */ - writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), + writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), mt->thermal_base + TEMP_ADCVALIDADDR); /* AHB address for auxadc voltage output */ - writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), + writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), mt->thermal_base + TEMP_ADCVOLTADDR); /* read valid & voltage are at the same register */ @@ -407,11 +483,12 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, mt->thermal_base + TEMP_ADCWRITECTRL); - for (i = 0; i < cfg->num_sensors; i++) - writel(sensor_mux_values[cfg->sensors[i]], - mt->thermal_base + sensing_points[i].adcpnp); + for (i = 0; i < conf->bank_data[num].num_sensors; i++) + writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], + mt->thermal_base + conf->adcpnp[i]); - writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0); + writel((1 << conf->bank_data[num].num_sensors) - 1, + mt->thermal_base + TEMP_MONCTL0); writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE, @@ -442,7 +519,7 @@ static int mtk_thermal_get_calibration_data(struct device *dev, /* Start with default values */ mt->adc_ge = 512; - for (i = 0; i < MT8173_NUM_SENSORS; i++) + for (i = 0; i < mt->conf->num_sensors; i++) mt->vts[i] = 260; mt->degc_cali = 40; mt->o_slope = 0; @@ -486,18 +563,36 @@ out: return ret; } +static const struct of_device_id mtk_thermal_of_match[] = { + { + .compatible = "mediatek,mt8173-thermal", + .data = (void *)&mt8173_thermal_data, + }, + { + .compatible = "mediatek,mt2701-thermal", + .data = (void *)&mt2701_thermal_data, + }, { + }, +}; +MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); + static int mtk_thermal_probe(struct platform_device *pdev) { int ret, i; struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; struct mtk_thermal *mt; struct resource *res; + const struct of_device_id *of_id; u64 auxadc_phys_base, apmixed_phys_base; mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); if (!mt) return -ENOMEM; + of_id = of_match_device(mtk_thermal_of_match, &pdev->dev); + if (of_id) + mt->conf = (const struct mtk_thermal_data *)of_id->data; + mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); if (IS_ERR(mt->clk_peri_therm)) return PTR_ERR(mt->clk_peri_therm); @@ -565,7 +660,7 @@ static int mtk_thermal_probe(struct platform_device *pdev) goto err_disable_clk_auxadc; } - for (i = 0; i < MT8173_NUM_ZONES; i++) + for (i = 0; i < mt->conf->num_banks; i++) mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base); @@ -592,13 +687,6 @@ static int mtk_thermal_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mtk_thermal_of_match[] = { - { - .compatible = "mediatek,mt8173-thermal", - }, { - }, -}; - static struct platform_driver mtk_thermal_driver = { .probe = mtk_thermal_probe, .remove = mtk_thermal_remove, @@ -610,6 +698,7 @@ static struct platform_driver mtk_thermal_driver = { module_platform_driver(mtk_thermal_driver); +MODULE_AUTHOR("Dawei Chien "); MODULE_AUTHOR("Sascha Hauer "); MODULE_AUTHOR("Hanyi Wu "); MODULE_DESCRIPTION("Mediatek thermal driver"); -- cgit v1.2.3