From 8844d0f1cb921f70ca09f6b54feeba0b90db072c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 13 Apr 2015 21:24:48 -0700 Subject: spi: bcm2835: Add GPIOLIB dependency Fix: drivers/spi/spi-bcm2835.c: In function 'chip_match_name': drivers/spi/spi-bcm2835.c:356:21: error: dereferencing pointer to incomplete type drivers/spi/spi-bcm2835.c: In function 'bcm2835_spi_setup': drivers/spi/spi-bcm2835.c:382:2: error: ` implicit declaration of function 'gpiochip_find' drivers/spi/spi-bcm2835.c:387:21: error: dereferencing pointer to incomplete type by adding the now mandatory GPIOLIB dependency. Fixes: a30a555d7435 ("spi: bcm2835: transform native-cs to gpio-cs on first spi_setup") Cc: Martin Sperl Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ab8dfbef6f1b..00cc019ddddf 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -78,6 +78,7 @@ config SPI_ATMEL config SPI_BCM2835 tristate "BCM2835 SPI controller" depends on ARCH_BCM2835 || COMPILE_TEST + depends on GPIOLIB help This selects a driver for the Broadcom BCM2835 SPI master. -- cgit v1.2.3 From 145367baa492246cc19d7e859db642e6fed6908e Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Thu, 16 Apr 2015 07:51:26 +0000 Subject: spi: bcm2835: change timeout of polling driver to 1s The way that the timeout code is written in the polling function the timeout does also trigger when interrupted or rescheduled while in the polling loop. This patch changes the timeout from effectively 20ms (=2 jiffies) to 1 second and removes the time that the transfer really takes out of the computation, as - per design - this is <30us and the jiffie resolution is 10ms so that does not make any difference what so ever. Signed-off-by: Martin Sperl Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index f63864a893c5..37875cf942f7 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -164,13 +164,12 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master, unsigned long xfer_time_us) { struct bcm2835_spi *bs = spi_master_get_devdata(master); - unsigned long timeout = jiffies + - max(4 * xfer_time_us * HZ / 1000000, 2uL); + /* set timeout to 1 second of maximum polling */ + unsigned long timeout = jiffies + HZ; /* enable HW block without interrupts */ bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA); - /* set timeout to 4x the expected time, or 2 jiffies */ /* loop until finished the transfer */ while (bs->rx_len) { /* read from fifo as much as possible */ -- cgit v1.2.3 From f8bb820da4ae863c676156627973a950129559fb Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Thu, 16 Apr 2015 10:54:18 +0800 Subject: spi: check tx_buf and rx_buf in spi_unmap_msg Some spi device drivers use the same tx_buf and rx_buf repeatly for better performance such as driver/input/touchsreen/ads7846.c, but spi core grab tx_buf /rx_buf of transfer and set them as dummy_tx/dummy_rx once they are NULL. Thus, in the second time the tx_buf/rx_buf will be replaced by dummy_tx/dummy_rx and the data which produced by the last tx or rx may be wrongly sent to the device or handled by the upper level protocol. This patch just keep the orignal value of tx_buf/rx_buf if they are NULL after this transfer processed. Signed-off-by: Robin Gong Signed-off-by: Mark Brown --- drivers/spi/spi.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index d5d7d2235163..50910d85df5a 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -583,6 +583,15 @@ static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg) rx_dev = master->dma_rx->device->dev; list_for_each_entry(xfer, &msg->transfers, transfer_list) { + /* + * Restore the original value of tx_buf or rx_buf if they are + * NULL. + */ + if (xfer->tx_buf == master->dummy_tx) + xfer->tx_buf = NULL; + if (xfer->rx_buf == master->dummy_rx) + xfer->rx_buf = NULL; + if (!master->can_dma(master, msg->spi, xfer)) continue; -- cgit v1.2.3 From 7d0ec8b6f40b356f780b79de63eeafd6b907d68c Mon Sep 17 00:00:00 2001 From: Pelle Nilsson Date: Tue, 14 Apr 2015 15:40:17 +0200 Subject: spi: bitbang: Make setup_transfer() callback optional Some controller drivers have no need of this callback (spi-altera even causes a NULL pointer dereference because it doesn't register the callback, falsely assuming that it is already optional). Fixes: 30af9b558a56 ("spi/bitbang: Drop empty setup() functions") Signed-off-by: Pelle Nilsson Reviewed-by: Ezequiel Garcia Signed-off-by: Mark Brown --- drivers/spi/spi-bitbang.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 5ef6638d5e8a..840a4984d365 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -180,7 +180,6 @@ int spi_bitbang_setup(struct spi_device *spi) { struct spi_bitbang_cs *cs = spi->controller_state; struct spi_bitbang *bitbang; - int retval; unsigned long flags; bitbang = spi_master_get_devdata(spi->master); @@ -197,9 +196,11 @@ int spi_bitbang_setup(struct spi_device *spi) if (!cs->txrx_word) return -EINVAL; - retval = bitbang->setup_transfer(spi, NULL); - if (retval < 0) - return retval; + if (bitbang->setup_transfer) { + int retval = bitbang->setup_transfer(spi, NULL); + if (retval < 0) + return retval; + } dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); @@ -295,9 +296,11 @@ static int spi_bitbang_transfer_one(struct spi_master *master, /* init (-1) or override (1) transfer params */ if (do_setup != 0) { - status = bitbang->setup_transfer(spi, t); - if (status < 0) - break; + if (bitbang->setup_transfer) { + status = bitbang->setup_transfer(spi, t); + if (status < 0) + break; + } if (do_setup == -1) do_setup = 0; } -- cgit v1.2.3 From 575bec53181526ed01c0936ec008e1b70f8f5f31 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 22 Apr 2015 16:28:20 +0200 Subject: spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1 On CPM2, the SPI parameter RAM is dynamically allocated in the dualport RAM whereas in CPM1, it is statically allocated to a default address with capability to relocate it somewhere else via the use of CPM micropatch. The address of the parameter RAM is given by the boot loader and expected to be mapped via devm_ioremap_resource() In the current implementation, in function fsl_spi_cpm_get_pram() there is a confusion between the SPI_BASE register and the base of the SPI parameter RAM. Fortunatly, it is working properly with MPC866 and MPC885 because they do set SPI_BASE, but on MPC860 and other old MPC8xx that doesn't set SPI_BASE, pram_ofs is not properly set. Also, the parameter RAM is not properly mapped with devm_ioremap_resource() as it should but still gets accessible by chance through the full RAM which is mapped from somewhere else. This patch applies to the SPI driver the same principle as for the CPM UART: when the CPM is of type CPM1, we simply do an devm_ioremap_resource() of the area provided via the device tree. Signed-off-by: Christophe Leroy Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-cpm.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 9c46a3058743..6f466ab1201a 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "spi-fsl-cpm.h" #include "spi-fsl-lib.h" @@ -269,17 +270,6 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) if (mspi->flags & SPI_CPM2) { pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); out_be16(spi_base, pram_ofs); - } else { - struct spi_pram __iomem *pram = spi_base; - u16 rpbase = in_be16(&pram->rpbase); - - /* Microcode relocation patch applied? */ - if (rpbase) { - pram_ofs = rpbase; - } else { - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - out_be16(spi_base, pram_ofs); - } } iounmap(spi_base); @@ -292,7 +282,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) struct device_node *np = dev->of_node; const u32 *iprop; int size; - unsigned long pram_ofs; unsigned long bds_ofs; if (!(mspi->flags & SPI_CPM_MODE)) @@ -319,8 +308,21 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) } } - pram_ofs = fsl_spi_cpm_get_pram(mspi); - if (IS_ERR_VALUE(pram_ofs)) { + if (mspi->flags & SPI_CPM1) { + struct resource *res; + + res = platform_get_resource(to_platform_device(dev), + IORESOURCE_MEM, 1); + mspi->pram = devm_ioremap_resource(dev, res); + } else { + unsigned long pram_ofs = fsl_spi_cpm_get_pram(mspi); + + if (IS_ERR_VALUE(pram_ofs)) + mspi->pram = NULL; + else + mspi->pram = cpm_muram_addr(pram_ofs); + } + if (mspi->pram == NULL) { dev_err(dev, "can't allocate spi parameter ram\n"); goto err_pram; } @@ -346,8 +348,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) goto err_dummy_rx; } - mspi->pram = cpm_muram_addr(pram_ofs); - mspi->tx_bd = cpm_muram_addr(bds_ofs); mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd)); @@ -375,7 +375,8 @@ err_dummy_rx: err_dummy_tx: cpm_muram_free(bds_ofs); err_bds: - cpm_muram_free(pram_ofs); + if (!(mspi->flags & SPI_CPM1)) + cpm_muram_free(cpm_muram_offset(mspi->pram)); err_pram: fsl_spi_free_dummy_rx(); return -ENOMEM; -- cgit v1.2.3 From c5a06e75f38376238db6a38240bac4b27dfe5216 Mon Sep 17 00:00:00 2001 From: Fionn Cleary Date: Thu, 23 Apr 2015 21:13:40 +0200 Subject: spi/omap2-mcpsi: Always call spi_finalize_current_message() The spi queue waits forever for spi_finalize_current_message() to be called, blocking the bus. Ensure that all error paths from omap2_mcspi_transfer_one_message() call spi_finalize_current_message(). Signed-off-by: Fionn Cleary Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 4df8942058de..d1a5b9fc3eba 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1210,6 +1210,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, struct omap2_mcspi *mcspi; struct omap2_mcspi_dma *mcspi_dma; struct spi_transfer *t; + int status; spi = m->spi; mcspi = spi_master_get_devdata(master); @@ -1229,7 +1230,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, tx_buf ? "tx" : "", rx_buf ? "rx" : "", t->bits_per_word); - return -EINVAL; + status = -EINVAL; + goto out; } if (m->is_dma_mapped || len < DMA_MIN_BYTES) @@ -1241,7 +1243,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, if (dma_mapping_error(mcspi->dev, t->tx_dma)) { dev_dbg(mcspi->dev, "dma %cX %d bytes error\n", 'T', len); - return -EINVAL; + status = -EINVAL; + goto out; } } if (mcspi_dma->dma_rx && rx_buf != NULL) { @@ -1253,14 +1256,19 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, if (tx_buf != NULL) dma_unmap_single(mcspi->dev, t->tx_dma, len, DMA_TO_DEVICE); - return -EINVAL; + status = -EINVAL; + goto out; } } } omap2_mcspi_work(mcspi, m); + /* spi_finalize_current_message() changes the status inside the + * spi_message, save the status here. */ + status = m->status; +out: spi_finalize_current_message(master); - return 0; + return status; } static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) -- cgit v1.2.3