From 8916671e93a38c509e2ffb02c2ce3f37efe8af40 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 18 Mar 2017 03:17:28 +0900 Subject: spi: loopback-test: add ability to test zero-length transfer The spi-loopback-test module currently cannot test the spi_message including a zero-length transfer. Because the zero-length transfer is treated as a special value in several meanings. 1. The number of spi_transfer to execute in one test case is described by spi_test.transfer_count. It is normally computed by counting number of transfers with len > 0 in spi_test.transfers array. This change stops the detection for the number of spi_transfer. Each spi_test.transfer_count needs to be filled by hand now. 2. The spi_test.iterate_len is a list of transfer length to iterate on. This list is terminated by zero, so zero-length transfer cannot be included. This changes the terminal value from 0 to -1. 3. The length for the spi_transfer masked by spi_test.iterate_transfer_mask is iterated. Before starting the iteration, the default value which is statically initialized is applied. In order to specify the default value, zero-length is reserved. Currently, the default values are always '1'. So this removes this trick and add '1' to iterate_len list. By applying all these changes, the spi-loopback-test can execute spi messages with zero-length transfer. Signed-off-by: Akinobu Mita Signed-off-by: Mark Brown --- drivers/spi/spi-loopback-test.c | 55 +++++++++++++---------------------------- drivers/spi/spi-test.h | 19 +++++++------- 2 files changed, 26 insertions(+), 48 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index 85c0c4e391d9..6df6dddc2890 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -63,9 +63,9 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_rx_align = ITERATE_ALIGN, + .transfer_count = 1, .transfers = { { - .len = 1, .tx_buf = TX(0), .rx_buf = RX(0), }, @@ -77,9 +77,9 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_rx_align = ITERATE_ALIGN, + .transfer_count = 1, .transfers = { { - .len = 1, .tx_buf = TX(PAGE_SIZE - 4), .rx_buf = RX(PAGE_SIZE - 4), }, @@ -90,9 +90,9 @@ static struct spi_test spi_tests[] = { .fill_option = FILL_COUNT_8, .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, + .transfer_count = 1, .transfers = { { - .len = 1, .tx_buf = TX(0), }, }, @@ -102,9 +102,9 @@ static struct spi_test spi_tests[] = { .fill_option = FILL_COUNT_8, .iterate_len = { ITERATE_MAX_LEN }, .iterate_rx_align = ITERATE_ALIGN, + .transfer_count = 1, .transfers = { { - .len = 1, .rx_buf = RX(0), }, }, @@ -115,13 +115,12 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(0) | BIT(1), + .transfer_count = 2, .transfers = { { - .len = 1, .tx_buf = TX(0), }, { - .len = 1, /* this is why we cant use ITERATE_MAX_LEN */ .tx_buf = TX(SPI_TEST_MAX_SIZE_HALF), }, @@ -133,9 +132,9 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(0), + .transfer_count = 2, .transfers = { { - .len = 1, .tx_buf = TX(64), }, { @@ -150,13 +149,13 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(1), + .transfer_count = 2, .transfers = { { .len = 16, .tx_buf = TX(0), }, { - .len = 1, .tx_buf = TX(64), }, }, @@ -167,13 +166,12 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(0) | BIT(1), + .transfer_count = 2, .transfers = { { - .len = 1, .tx_buf = TX(0), }, { - .len = 1, .rx_buf = RX(0), }, }, @@ -184,9 +182,9 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(0), + .transfer_count = 2, .transfers = { { - .len = 1, .tx_buf = TX(0), }, { @@ -201,13 +199,13 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(1), + .transfer_count = 2, .transfers = { { .len = 1, .tx_buf = TX(0), }, { - .len = 1, .rx_buf = RX(0), }, }, @@ -218,14 +216,13 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(0) | BIT(1), + .transfer_count = 2, .transfers = { { - .len = 1, .tx_buf = TX(0), .rx_buf = RX(0), }, { - .len = 1, /* making sure we align without overwrite * the reason we can not use ITERATE_MAX_LEN */ @@ -240,9 +237,9 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(0), + .transfer_count = 2, .transfers = { { - .len = 1, /* making sure we align without overwrite */ .tx_buf = TX(1024), .rx_buf = RX(1024), @@ -261,6 +258,7 @@ static struct spi_test spi_tests[] = { .iterate_len = { ITERATE_MAX_LEN }, .iterate_tx_align = ITERATE_ALIGN, .iterate_transfer_mask = BIT(1), + .transfer_count = 2, .transfers = { { .len = 1, @@ -268,7 +266,6 @@ static struct spi_test spi_tests[] = { .rx_buf = RX(0), }, { - .len = 1, /* making sure we align without overwrite */ .tx_buf = TX(1024), .rx_buf = RX(1024), @@ -503,7 +500,7 @@ static int spi_test_check_loopback_result(struct spi_device *spi, /* if applicable to transfer check that rx_buf is equal to tx_buf */ list_for_each_entry(xfer, &msg->transfers, transfer_list) { /* if there is no rx, then no check is needed */ - if (!xfer->rx_buf) + if (!xfer->len || !xfer->rx_buf) continue; /* so depending on tx_buf we need to handle things */ if (xfer->tx_buf) { @@ -745,15 +742,6 @@ static int spi_test_run_iter(struct spi_device *spi, /* copy the test template to test */ memcpy(&test, testtemplate, sizeof(test)); - /* set up test->transfers to the correct count */ - if (!test.transfer_count) { - for (i = 0; - (i < SPI_TEST_MAX_TRANSFERS) && test.transfers[i].len; - i++) { - test.transfer_count++; - } - } - /* if iterate_transfer_mask is not set, * then set it to first transfer only */ @@ -799,8 +787,7 @@ static int spi_test_run_iter(struct spi_device *spi, /* only when bit in transfer mask is set */ if (!(test.iterate_transfer_mask & BIT(i))) continue; - if (len) - test.transfers[i].len = len; + test.transfers[i].len = len; if (test.transfers[i].tx_buf) test.transfers[i].tx_buf += tx_off; if (test.transfers[i].tx_buf) @@ -910,15 +897,6 @@ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test, /* iterate over all the iterable values using macros * (to make it a bit more readable... */ -#define FOR_EACH_ITERATE(var, defaultvalue) \ - for (idx_##var = -1, var = defaultvalue; \ - ((idx_##var < 0) || \ - ( \ - (idx_##var < SPI_TEST_MAX_ITERATE) && \ - (var = test->iterate_##var[idx_##var]) \ - ) \ - ); \ - idx_##var++) #define FOR_EACH_ALIGNMENT(var) \ for (var = 0; \ var < (test->iterate_##var ? \ @@ -928,7 +906,8 @@ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test, 1); \ var++) - FOR_EACH_ITERATE(len, 0) { + for (idx_len = 0; idx_len < SPI_TEST_MAX_ITERATE && + (len = test->iterate_len[idx_len]) != -1; idx_len++) { FOR_EACH_ALIGNMENT(tx_align) { FOR_EACH_ALIGNMENT(rx_align) { /* and run the iteration */ diff --git a/drivers/spi/spi-test.h b/drivers/spi/spi-test.h index 922c52833239..2dd569138880 100644 --- a/drivers/spi/spi-test.h +++ b/drivers/spi/spi-test.h @@ -48,9 +48,8 @@ * * @msg: a template @spi_message usedfor the default settings * @transfers: array of @spi_transfers that are part of the - * resulting spi_message. The first transfer with len == 0 - * signifies the end of the list - * @transfer_count: normally computed number of transfers with len > 0 + * resulting spi_message. + * @transfer_count: number of transfers * * @run_test: run a specific spi_test - this allows to override * the default implementation of @spi_test_run_transfer @@ -62,8 +61,7 @@ * @expected_return: the expected return code - in some cases we want to * test also for error conditions * - * @iterate_len: list of length to iterate on (in addition to the - * explicitly set @spi_transfer.len) + * @iterate_len: list of length to iterate on * @iterate_tx_align: change the alignment of @spi_transfer.tx_buf * for all values in the below range if set. * the ranges are: @@ -89,7 +87,7 @@ struct spi_test { int (*execute_msg)(struct spi_device *spi, struct spi_test *test, void *tx, void *rx); int expected_return; - /* iterate over all the non-zero values */ + /* iterate over all values, terminated by a -1 */ int iterate_len[SPI_TEST_MAX_ITERATE]; int iterate_tx_align; int iterate_rx_align; @@ -126,11 +124,12 @@ int spi_test_execute_msg(struct spi_device *spi, int spi_test_run_tests(struct spi_device *spi, struct spi_test *tests); -/* some of the default @spi_transfer.len to test */ -#define ITERATE_LEN 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \ +#define ITERATE_LEN_LIST 1, 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \ 1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537 - -#define ITERATE_MAX_LEN ITERATE_LEN, SPI_TEST_MAX_SIZE - 1, SPI_TEST_MAX_SIZE +/* some of the default @spi_transfer.len to test, terminated by a -1 */ +#define ITERATE_LEN ITERATE_LEN_LIST, -1 +#define ITERATE_MAX_LEN ITERATE_LEN_LIST, (SPI_TEST_MAX_SIZE - 1), \ + SPI_TEST_MAX_SIZE, -1 /* the default alignment to test */ #define ITERATE_ALIGN sizeof(int) -- cgit v1.2.3