From ae2d4c396e19f45918ed6e0900b031538d009823 Mon Sep 17 00:00:00 2001 From: Nye Liu Date: Wed, 23 Jul 2008 21:29:50 -0700 Subject: cpm1: don't send break on TX_STOP, don't interrupt RX/TX when adjusting termios parameters Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break character. The driver appears to properly re-initialize _brkcr when the SMC is restarted. Do not interrupt RX/TX when the termios is being adjusted; it results in corrupted characters appearing on the line. Cc: Vitaly Bordug Cc: Scott Wood Cc: Paul Mackerras Cc: Kumar Gala Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/cpm_uart/cpm_uart_core.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/serial/cpm_uart') diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 1ff80de177db..a4f86927a74b 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -435,10 +435,13 @@ static void cpm_uart_shutdown(struct uart_port *port) } /* Shut them really down and reinit buffer descriptors */ - if (IS_SMC(pinfo)) + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - else + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + } cpm_uart_initbd(pinfo); } @@ -554,9 +557,11 @@ static void cpm_uart_set_termios(struct uart_port *port, * enables, because we want to put them back if they were * present. */ - prev_mode = in_be16(&smcp->smc_smcmr); - out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | SMCMR_SM_UART); - setbits16(&smcp->smc_smcmr, (prev_mode & (SMCMR_REN | SMCMR_TEN))); + prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); + /* Output in *one* operation, so we don't interrupt RX/TX if they + * were already enabled. */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | + SMCMR_SM_UART | prev_mode); } else { out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } @@ -1198,12 +1203,14 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) udbg_putc = NULL; #endif - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); } -- cgit v1.2.3