From 6b2f2d05b58102f6d1b07806ff170fbcc5cdc3de Mon Sep 17 00:00:00 2001 From: Bhavesh Jashnani Date: Sat, 9 Jan 2021 18:08:47 +0530 Subject: scsi: pm80xx: Simultaneous poll for all FW readiness In check_fw_ready() we first wait for ILA to come up and then we wait for RAAE to come up and IOPs and so on. This is a sequential check. Because of this, ILA image seems to be not ready in the allocated time and so the driver marks it as "not ready" and then moves on to other FW images. ILA does become ready eventually, but is not checked again. The driver concludes that FW is not ready when it actually is. Instead of sequentially polling each image, we keep polling for all images to be ready. The timeout for the polling has been set to the sum of what was used for each individual image. Link: https://lore.kernel.org/r/20210109123849.17098-7-Viswas.G@microchip.com Acked-by: Jack Wang Signed-off-by: Bhavesh Jashnani Signed-off-by: Viswas G Signed-off-by: Ruksar Devadi Signed-off-by: Ashokkumar N Signed-off-by: Radha Ramachandran Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm80xx_hwi.c | 80 ++++++++++++---------------------------- 1 file changed, 23 insertions(+), 57 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 407c0cf6ab5f..df679e36954a 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -1043,6 +1043,7 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha) u32 value; u32 max_wait_count; u32 max_wait_time; + u32 expected_mask; int ret = 0; /* reset / PCIe ready */ @@ -1052,70 +1053,35 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha) value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); } while ((value == 0xFFFFFFFF) && (--max_wait_count)); - /* check ila status */ - max_wait_time = max_wait_count = 50; /* 1000 milli sec */ - do { - msleep(FW_READY_INTERVAL); - value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); - } while (((value & SCRATCH_PAD_ILA_READY) != - SCRATCH_PAD_ILA_READY) && (--max_wait_count)); - if (!max_wait_count) - ret = -1; - else { - pm8001_dbg(pm8001_ha, MSG, - " ila ready status in %d millisec\n", - (max_wait_time - max_wait_count)); - } - - /* check RAAE status */ - max_wait_time = max_wait_count = 90; /* 1800 milli sec */ - do { - msleep(FW_READY_INTERVAL); - value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); - } while (((value & SCRATCH_PAD_RAAE_READY) != - SCRATCH_PAD_RAAE_READY) && (--max_wait_count)); - if (!max_wait_count) - ret = -1; - else { - pm8001_dbg(pm8001_ha, MSG, - " raae ready status in %d millisec\n", - (max_wait_time - max_wait_count)); + /* check ila, RAAE and iops status */ + if ((pm8001_ha->chip_id != chip_8008) && + (pm8001_ha->chip_id != chip_8009)) { + max_wait_time = max_wait_count = 180; /* 3600 milli sec */ + expected_mask = SCRATCH_PAD_ILA_READY | + SCRATCH_PAD_RAAE_READY | + SCRATCH_PAD_IOP0_READY | + SCRATCH_PAD_IOP1_READY; + } else { + max_wait_time = max_wait_count = 170; /* 3400 milli sec */ + expected_mask = SCRATCH_PAD_ILA_READY | + SCRATCH_PAD_RAAE_READY | + SCRATCH_PAD_IOP0_READY; } - - /* check iop0 status */ - max_wait_time = max_wait_count = 30; /* 600 milli sec */ do { msleep(FW_READY_INTERVAL); value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); - } while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) && - (--max_wait_count)); - if (!max_wait_count) + } while (((value & expected_mask) != + expected_mask) && (--max_wait_count)); + if (!max_wait_count) { + pm8001_dbg(pm8001_ha, INIT, + "At least one FW component failed to load within %d millisec: Scratchpad1: 0x%x\n", + max_wait_time * FW_READY_INTERVAL, value); ret = -1; - else { + } else { pm8001_dbg(pm8001_ha, MSG, - " iop0 ready status in %d millisec\n", - (max_wait_time - max_wait_count)); + "All FW components ready by %d ms\n", + (max_wait_time - max_wait_count) * FW_READY_INTERVAL); } - - /* check iop1 status only for 16 port controllers */ - if ((pm8001_ha->chip_id != chip_8008) && - (pm8001_ha->chip_id != chip_8009)) { - /* 200 milli sec */ - max_wait_time = max_wait_count = 10; - do { - msleep(FW_READY_INTERVAL); - value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); - } while (((value & SCRATCH_PAD_IOP1_READY) != - SCRATCH_PAD_IOP1_READY) && (--max_wait_count)); - if (!max_wait_count) - ret = -1; - else { - pm8001_dbg(pm8001_ha, MSG, - "iop1 ready status in %d millisec\n", - (max_wait_time - max_wait_count)); - } - } - return ret; } -- cgit v1.2.3