From da96aea0ed177105cb13ee83b328f6c61e061d3f Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Fri, 19 May 2017 22:18:55 +0530 Subject: rtc: interface: Validate alarm-time before handling rollover In function __rtc_read_alarm() its possible for an alarm time-stamp to be invalid even after replacing missing components with current time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this case and will cause the call to 'rtc_tm_to_time64(&alarm->time)' return a negative value for variable t_alm. While handling alarm rollover this negative t_alm (assumed to seconds offset from '1970-01-01 00:00:00') is converted back to rtc_time via rtc_time64_to_tm() which results in this error log with seemingly garbage values: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" This error was generated when the rtc driver (rtc-opal in this case) returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that the alarm is disabled. Though I have submitted a separate fix for the rtc-opal driver, this issue may potentially impact other existing/future rtc drivers. To fix this issue the patch validates the alarm time-stamp just after filling up the missing datetime components and if rtc_valid_tm() still reports it to be invalid then bails out of the function without handling the rollover. Reported-by: Steve Best Signed-off-by: Vaibhav Jain Signed-off-by: Alexandre Belloni --- drivers/rtc/interface.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/rtc') diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index fc0fa7577636..8cec9a02c0b8 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -227,6 +227,13 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) missing = year; } + /* Can't proceed if alarm is still invalid after replacing + * missing fields. + */ + err = rtc_valid_tm(&alarm->time); + if (err) + goto done; + /* with luck, no rollover is needed */ t_now = rtc_tm_to_time64(&now); t_alm = rtc_tm_to_time64(&alarm->time); @@ -278,9 +285,9 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) dev_warn(&rtc->dev, "alarm rollover not handled\n"); } -done: err = rtc_valid_tm(&alarm->time); +done: if (err) { dev_warn(&rtc->dev, "invalid alarm value: %d-%d-%d %d:%d:%d\n", alarm->time.tm_year + 1900, alarm->time.tm_mon + 1, -- cgit v1.2.3