From 767eee362fd72bb2ca44cc80419ca4b38c6d8369 Mon Sep 17 00:00:00 2001 From: Liam Breck Date: Wed, 18 Jan 2017 09:26:48 -0800 Subject: power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING The interrupt signal is TRIGGER_FALLING. This is is specified in the data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us pulse to host to report charger device status and fault." Also the direction can be seen in the data sheet Figure 37 "BQ24190 with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k pull-up resistor installed for the sample configurations. Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by: Liam Breck Acked-by: Mark Greer Acked-by: Tony Lindgren Signed-off-by: Sebastian Reichel --- drivers/power/supply/bq24190_charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/power') diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index 2f333efa24ab..0f959bafed8d 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -1394,7 +1394,7 @@ static int bq24190_probe(struct i2c_client *client, ret = devm_request_threaded_irq(dev, bdi->irq, NULL, bq24190_irq_handler_thread, - IRQF_TRIGGER_RISING | IRQF_ONESHOT, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "bq24190-charger", bdi); if (ret < 0) { dev_err(dev, "Can't set up irq handler\n"); -- cgit v1.2.3