From 4b082ac6b7687d564065cdb65393b8d1ed5e1a03 Mon Sep 17 00:00:00 2001
From: "lecopzer@gmail.com" <lecopzer@gmail.com>
Date: Fri, 13 Sep 2019 02:25:59 +0800
Subject: test_power: Add CHARGE_COUNTER properties

CHARGE_COUNTER is really general in other power supply drivers and
Android also has an interface to monitor CHARGE_COUNTER, so let's
add it into test framework.

Set default as -1000 is because the default status is
POWER_SUPPLY_STATUS_DISCHARGING, which means the counter should be
negative, and 1000 means not zero but small enough.

Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/test_power.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/test_power.c b/drivers/power/supply/test_power.c
index c3cad2b6daba..70db8d20e138 100644
--- a/drivers/power/supply/test_power.c
+++ b/drivers/power/supply/test_power.c
@@ -33,6 +33,7 @@ static int battery_present		= 1; /* true */
 static int battery_technology		= POWER_SUPPLY_TECHNOLOGY_LION;
 static int battery_capacity		= 50;
 static int battery_voltage		= 3300;
+static int battery_charge_counter	= -1000;
 
 static bool module_initialized;
 
@@ -100,6 +101,9 @@ static int test_power_get_battery_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		val->intval = battery_capacity;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		val->intval = battery_charge_counter;
+		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		val->intval = 100;
@@ -135,6 +139,7 @@ static enum power_supply_property test_power_battery_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
@@ -447,6 +452,21 @@ static int param_set_battery_voltage(const char *key,
 
 #define param_get_battery_voltage param_get_int
 
+static int param_set_battery_charge_counter(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_charge_counter = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_charge_counter param_get_int
+
 static const struct kernel_param_ops param_ops_ac_online = {
 	.set = param_set_ac_online,
 	.get = param_get_ac_online,
@@ -487,6 +507,11 @@ static const struct kernel_param_ops param_ops_battery_voltage = {
 	.get = param_get_battery_voltage,
 };
 
+static const struct kernel_param_ops param_ops_battery_charge_counter = {
+	.set = param_set_battery_charge_counter,
+	.get = param_get_battery_charge_counter,
+};
+
 #define param_check_ac_online(name, p) __param_check(name, p, void);
 #define param_check_usb_online(name, p) __param_check(name, p, void);
 #define param_check_battery_status(name, p) __param_check(name, p, void);
@@ -495,6 +520,7 @@ static const struct kernel_param_ops param_ops_battery_voltage = {
 #define param_check_battery_health(name, p) __param_check(name, p, void);
 #define param_check_battery_capacity(name, p) __param_check(name, p, void);
 #define param_check_battery_voltage(name, p) __param_check(name, p, void);
+#define param_check_battery_charge_counter(name, p) __param_check(name, p, void);
 
 
 module_param(ac_online, ac_online, 0644);
@@ -525,6 +551,10 @@ MODULE_PARM_DESC(battery_capacity, "battery capacity (percentage)");
 module_param(battery_voltage, battery_voltage, 0644);
 MODULE_PARM_DESC(battery_voltage, "battery voltage (millivolts)");
 
+module_param(battery_charge_counter, battery_charge_counter, 0644);
+MODULE_PARM_DESC(battery_charge_counter,
+	"battery charge counter (microampere-hours)");
+
 MODULE_DESCRIPTION("Power supply driver for testing");
 MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 69318b399569e3b03f7e6dcaac41c0ed348913a2 Mon Sep 17 00:00:00 2001
From: "lecopzer@gmail.com" <lecopzer@gmail.com>
Date: Fri, 13 Sep 2019 02:26:00 +0800
Subject: test_power: Add CURRENT properties

CURRENT is really general in other battery drivers,
Android also has an interface to monitor CURRENT, so let's
add it into test framework.

The default value (1.6A) is just a random but reasonable value.

Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/test_power.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/test_power.c b/drivers/power/supply/test_power.c
index 70db8d20e138..65c23ef6408d 100644
--- a/drivers/power/supply/test_power.c
+++ b/drivers/power/supply/test_power.c
@@ -34,6 +34,7 @@ static int battery_technology		= POWER_SUPPLY_TECHNOLOGY_LION;
 static int battery_capacity		= 50;
 static int battery_voltage		= 3300;
 static int battery_charge_counter	= -1000;
+static int battery_current		= 1600;
 
 static bool module_initialized;
 
@@ -118,6 +119,10 @@ static int test_power_get_battery_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		val->intval = battery_voltage;
 		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = battery_current;
+		break;
 	default:
 		pr_info("%s: some properties deliberately report errors.\n",
 			__func__);
@@ -149,6 +154,8 @@ static enum power_supply_property test_power_battery_props[] = {
 	POWER_SUPPLY_PROP_SERIAL_NUMBER,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
 static char *test_power_ac_supplied_to[] = {
@@ -467,6 +474,21 @@ static int param_set_battery_charge_counter(const char *key,
 
 #define param_get_battery_charge_counter param_get_int
 
+static int param_set_battery_current(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_current = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_current param_get_int
+
 static const struct kernel_param_ops param_ops_ac_online = {
 	.set = param_set_ac_online,
 	.get = param_get_ac_online,
@@ -512,6 +534,11 @@ static const struct kernel_param_ops param_ops_battery_charge_counter = {
 	.get = param_get_battery_charge_counter,
 };
 
+static const struct kernel_param_ops param_ops_battery_current = {
+	.set = param_set_battery_current,
+	.get = param_get_battery_current,
+};
+
 #define param_check_ac_online(name, p) __param_check(name, p, void);
 #define param_check_usb_online(name, p) __param_check(name, p, void);
 #define param_check_battery_status(name, p) __param_check(name, p, void);
@@ -521,6 +548,7 @@ static const struct kernel_param_ops param_ops_battery_charge_counter = {
 #define param_check_battery_capacity(name, p) __param_check(name, p, void);
 #define param_check_battery_voltage(name, p) __param_check(name, p, void);
 #define param_check_battery_charge_counter(name, p) __param_check(name, p, void);
+#define param_check_battery_current(name, p) __param_check(name, p, void);
 
 
 module_param(ac_online, ac_online, 0644);
@@ -555,6 +583,9 @@ module_param(battery_charge_counter, battery_charge_counter, 0644);
 MODULE_PARM_DESC(battery_charge_counter,
 	"battery charge counter (microampere-hours)");
 
+module_param(battery_current, battery_current, 0644);
+MODULE_PARM_DESC(battery_current, "battery current (milliampere)");
+
 MODULE_DESCRIPTION("Power supply driver for testing");
 MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From b0ac8596edc8b37de90a5ec095a25abbbc24f169 Mon Sep 17 00:00:00 2001
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Thu, 26 Sep 2019 13:25:37 +0300
Subject: power: reset: at91-poweroff: lookup for proper PMC DT node

Driver has been enabled also for SAM9X60. At the moment the patch which did
this has been sent to mainline the PMC for SAM9X60 wasn't integrated.
SAM9X60 has a new PMC compatible (see commit 01e2113de9a5
("clk: at91: add sam9x60 pmc driver")). Do to this we have to
look for proper PMC compatible here, in SHDWC driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/power')

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index e341cc5c0ea6..1c18f465a245 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -269,6 +269,12 @@ static const struct of_device_id at91_shdwc_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
 
+static const struct of_device_id at91_pmc_ids[] = {
+	{ .compatible = "atmel,sama5d2-pmc" },
+	{ .compatible = "microchip,sam9x60-pmc" },
+	{ /* Sentinel. */ }
+};
+
 static int __init at91_shdwc_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -313,7 +319,7 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 
 	at91_shdwc_dt_configure(pdev);
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-pmc");
+	np = of_find_matching_node(NULL, at91_pmc_ids);
 	if (!np) {
 		ret = -ENODEV;
 		goto clk_disable;
-- 
cgit v1.2.3


From f2e5c49d221bd46c72d363ae595e47268bd1f420 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Wed, 2 Oct 2019 19:25:44 +0800
Subject: power: supply: axp20x_usb_power: enable USB BC detection on AXP813

The AXP813 PMIC has support for detection of USB Battery Charging
specification, and it will limit the current to 500mA by default when
the detection is not enabled or the detection result is SDP.

Enable the BC detection to allow correctly selection of the current.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/axp20x_usb_power.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c
index dc4c316eff81..5f0a5722b19e 100644
--- a/drivers/power/supply/axp20x_usb_power.c
+++ b/drivers/power/supply/axp20x_usb_power.c
@@ -48,6 +48,8 @@
 
 #define AXP20X_VBUS_MON_VBUS_VALID	BIT(3)
 
+#define AXP813_BC_EN		BIT(0)
+
 /*
  * Note do not raise the debounce time, we must report Vusb high within
  * 100ms otherwise we get Vbus errors in musb.
@@ -495,6 +497,12 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	if (power->axp20x_id == AXP813_ID) {
+		/* Enable USB Battery Charging specification detection */
+		regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
+				   AXP813_BC_EN, AXP813_BC_EN);
+	}
+
 	psy_cfg.of_node = pdev->dev.of_node;
 	psy_cfg.drv_data = power;
 
-- 
cgit v1.2.3


From 0a8686e3090c4a2d21049fccc9466c9d3d312ba6 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 11 Oct 2019 09:17:59 +0200
Subject: power: supply: ab8500_btemp: Convert to IIO ADC

This switches the AB8500 battery temperature driver to using
the standard IIO ADC channel lookup and conversion routines.

Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/power/supply/Kconfig        |  2 +-
 drivers/power/supply/ab8500_btemp.c | 41 ++++++++++++++++++++++++++-----------
 2 files changed, 30 insertions(+), 13 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index c84a7b1caeb6..27164a1d3c7c 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -629,7 +629,7 @@ config BATTERY_GAUGE_LTC2941
 
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
-	depends on AB8500_CORE && AB8500_GPADC
+	depends on AB8500_CORE && AB8500_GPADC && (IIO = y)
 	help
 	  Say Y to include support for AB8500 battery management.
 
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index 8fe81259bfd9..ad8c51ef8b8b 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -26,7 +26,7 @@
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/iio/consumer.h>
 
 #define VTVOUT_V			1800
 
@@ -79,7 +79,8 @@ struct ab8500_btemp_ranges {
  * @bat_temp:		Dispatched battery temperature in degree Celsius
  * @prev_bat_temp	Last measured battery temperature in degree Celsius
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @adc_btemp_ball:	ADC channel for the battery ball temperature
+ * @adc_bat_ctrl:	ADC channel for the battery control
  * @fg:			Pointer to the struct fg
  * @bm:           	Platform specific battery management information
  * @btemp_psy:		Structure for BTEMP specific battery properties
@@ -96,7 +97,8 @@ struct ab8500_btemp {
 	int bat_temp;
 	int prev_bat_temp;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *btemp_ball;
+	struct iio_channel *bat_ctrl;
 	struct ab8500_fg *fg;
 	struct abx500_bm_data *bm;
 	struct power_supply *btemp_psy;
@@ -177,13 +179,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
  */
 static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
 {
-	int vbtemp;
+	int vbtemp, ret;
 	static int prev;
 
-	vbtemp = ab8500_gpadc_convert(di->gpadc, BAT_CTRL);
-	if (vbtemp < 0) {
+	ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
+	if (ret < 0) {
 		dev_err(di->dev,
-			"%s gpadc conversion failed, using previous value",
+			"%s ADC conversion failed, using previous value",
 			__func__);
 		return prev;
 	}
@@ -455,7 +457,7 @@ static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
  */
 static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
 {
-	int temp;
+	int temp, ret;
 	static int prev;
 	int rbat, rntc, vntc;
 	u8 id;
@@ -480,10 +482,10 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
 			di->bm->bat_type[id].r_to_t_tbl,
 			di->bm->bat_type[id].n_temp_tbl_elements, rbat);
 	} else {
-		vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL);
-		if (vntc < 0) {
+		ret = iio_read_channel_processed(di->btemp_ball, &vntc);
+		if (ret < 0) {
 			dev_err(di->dev,
-				"%s gpadc conversion failed,"
+				"%s ADC conversion failed,"
 				" using previous value\n", __func__);
 			return prev;
 		}
@@ -1024,7 +1026,22 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	/* Get ADC channels */
+	di->btemp_ball = devm_iio_channel_get(&pdev->dev, "btemp_ball");
+	if (IS_ERR(di->btemp_ball)) {
+		if (PTR_ERR(di->btemp_ball) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get BTEMP BALL ADC channel\n");
+		return PTR_ERR(di->btemp_ball);
+	}
+	di->bat_ctrl = devm_iio_channel_get(&pdev->dev, "bat_ctrl");
+	if (IS_ERR(di->bat_ctrl)) {
+		if (PTR_ERR(di->bat_ctrl) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get BAT CTRL ADC channel\n");
+		return PTR_ERR(di->bat_ctrl);
+	}
 
 	di->initialized = false;
 
-- 
cgit v1.2.3


From 97ab78bac5d0d2d5eec68278d4c1810056388189 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 11 Oct 2019 09:18:00 +0200
Subject: power: supply: ab8500_charger: Convert to IIO ADC

This switches the AB8500 battery charger driver to using
the standard IIO ADC channel lookup and conversion routines.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/power/supply/ab8500_charger.c | 78 ++++++++++++++++++++++++++---------
 1 file changed, 58 insertions(+), 20 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index e51d0e72beea..c053ede47eb2 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -29,10 +29,10 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 #include <linux/mfd/abx500/ux500_chargalg.h>
 #include <linux/usb/otg.h>
 #include <linux/mutex.h>
+#include <linux/iio/consumer.h>
 
 /* Charger constants */
 #define NO_PW_CONN			0
@@ -233,7 +233,10 @@ struct ab8500_charger_max_usb_in_curr {
  * @current_stepping_sessions:
  *			Counter for current stepping sessions
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @adc_main_charger_v	ADC channel for main charger voltage
+ * @adc_main_charger_c	ADC channel for main charger current
+ * @adc_vbus_v		ADC channel for USB charger voltage
+ * @adc_usb_charger_c	ADC channel for USB charger current
  * @bm:           	Platform specific battery management information
  * @flags:		Structure for information about events triggered
  * @usb_state:		Structure for usb stack information
@@ -283,7 +286,10 @@ struct ab8500_charger {
 	int is_aca_rid;
 	atomic_t current_stepping_sessions;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *adc_main_charger_v;
+	struct iio_channel *adc_main_charger_c;
+	struct iio_channel *adc_vbus_v;
+	struct iio_channel *adc_usb_charger_c;
 	struct abx500_bm_data *bm;
 	struct ab8500_charger_event_flags flags;
 	struct ab8500_charger_usb_state usb_state;
@@ -459,13 +465,13 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
  */
 static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
 {
-	int vch;
+	int vch, ret;
 
 	/* Only measure voltage if the charger is connected */
 	if (di->ac.charger_connected) {
-		vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V);
-		if (vch < 0)
-			dev_err(di->dev, "%s gpadc conv failed,\n", __func__);
+		ret = iio_read_channel_processed(di->adc_main_charger_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		vch = 0;
 	}
@@ -510,13 +516,13 @@ static int ab8500_charger_ac_cv(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
 {
-	int vch;
+	int vch, ret;
 
 	/* Only measure voltage if the charger is connected */
 	if (di->usb.charger_connected) {
-		vch = ab8500_gpadc_convert(di->gpadc, VBUS_V);
-		if (vch < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_vbus_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		vch = 0;
 	}
@@ -532,13 +538,13 @@ static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
 {
-	int ich;
+	int ich, ret;
 
 	/* Only measure current if the charger is online */
 	if (di->usb.charger_online) {
-		ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C);
-		if (ich < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		ich = 0;
 	}
@@ -554,13 +560,13 @@ static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
 {
-	int ich;
+	int ich, ret;
 
 	/* Only measure current if the charger is online */
 	if (di->ac.charger_online) {
-		ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C);
-		if (ich < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_main_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		ich = 0;
 	}
@@ -3371,7 +3377,39 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	/* Get ADC channels */
+	di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev,
+						      "main_charger_v");
+	if (IS_ERR(di->adc_main_charger_v)) {
+		if (PTR_ERR(di->adc_main_charger_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC main charger voltage\n");
+		return PTR_ERR(di->adc_main_charger_v);
+	}
+	di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev,
+						      "main_charger_c");
+	if (IS_ERR(di->adc_main_charger_c)) {
+		if (PTR_ERR(di->adc_main_charger_c) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC main charger current\n");
+		return PTR_ERR(di->adc_main_charger_v);
+	}
+	di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+	if (IS_ERR(di->adc_vbus_v)) {
+		if (PTR_ERR(di->adc_vbus_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n");
+		return PTR_ERR(di->adc_vbus_v);
+	}
+	di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev,
+						     "usb_charger_c");
+	if (IS_ERR(di->adc_usb_charger_c)) {
+		if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC USB charger current\n");
+		return PTR_ERR(di->adc_usb_charger_c);
+	}
 
 	/* initialize lock */
 	spin_lock_init(&di->usb_state.usb_lock);
-- 
cgit v1.2.3


From 1e82623c3ca6f58a40c8ffbbbc4cfd3f102a04cc Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 11 Oct 2019 09:18:01 +0200
Subject: power: supply: ab8500_fg: Convert to IIO ADC

This switches the AB8500 fuel gauge driver to using
the standard IIO ADC channel lookup and conversion routines.

Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/power/supply/ab8500_fg.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 6fc4bc30644c..f7909dfd3b61 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -32,7 +32,7 @@
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/iio/consumer.h>
 #include <linux/kernel.h>
 
 #define MILLI_TO_MICRO			1000
@@ -182,7 +182,7 @@ struct inst_curr_result_list {
  * @bat_cap:		Structure for battery capacity specific parameters
  * @avg_cap:		Average capacity filter
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @main_bat_v:		ADC channel for the main battery voltage
  * @bm:           	Platform specific battery management information
  * @fg_psy:		Structure that holds the FG specific battery properties
  * @fg_wq:		Work queue for running the FG algorithm
@@ -224,7 +224,7 @@ struct ab8500_fg {
 	struct ab8500_fg_battery_capacity bat_cap;
 	struct ab8500_fg_avg_cap avg_cap;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *main_bat_v;
 	struct abx500_bm_data *bm;
 	struct power_supply *fg_psy;
 	struct workqueue_struct *fg_wq;
@@ -829,13 +829,13 @@ exit:
  */
 static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
 {
-	int vbat;
+	int vbat, ret;
 	static int prev;
 
-	vbat = ab8500_gpadc_convert(di->gpadc, MAIN_BAT_V);
-	if (vbat < 0) {
+	ret = iio_read_channel_processed(di->main_bat_v, &vbat);
+	if (ret < 0) {
 		dev_err(di->dev,
-			"%s gpadc conversion failed, using previous value\n",
+			"%s ADC conversion failed, using previous value\n",
 			__func__);
 		return prev;
 	}
@@ -3066,7 +3066,14 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	di->main_bat_v = devm_iio_channel_get(&pdev->dev, "main_bat_v");
+	if (IS_ERR(di->main_bat_v)) {
+		if (PTR_ERR(di->main_bat_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get main battery ADC channel\n");
+		return PTR_ERR(di->main_bat_v);
+	}
 
 	psy_cfg.supplied_to = supply_interface;
 	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
-- 
cgit v1.2.3


From bffc687cc6c2b2833a2ef6927db4468437b2ba37 Mon Sep 17 00:00:00 2001
From: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Date: Tue, 15 Oct 2019 21:43:41 +0530
Subject: power: supply: abx500_chargalg: Fix code indentation

Fixed Code indentation error caused due to using spaces
instead of tabs.

The error reported by checkpatch.pl is:
 ERROR: code indent should use tabs where possible

The warning reported by checkpatch.pl is:
 WARNING: please, no spaces at the start of a line

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/abx500_chargalg.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c
index 23757fb10479..e6e37d4f20e4 100644
--- a/drivers/power/supply/abx500_chargalg.c
+++ b/drivers/power/supply/abx500_chargalg.c
@@ -354,13 +354,13 @@ static int abx500_chargalg_check_charger_enable(struct abx500_chargalg *di)
 
 	if (di->chg_info.charger_type & USB_CHG) {
 		return di->usb_chg->ops.check_enable(di->usb_chg,
-                         di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
-                         di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+			di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+			di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
 	} else if ((di->chg_info.charger_type & AC_CHG) &&
 		   !(di->ac_chg->external)) {
 		return di->ac_chg->ops.check_enable(di->ac_chg,
-                         di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
-                         di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+			di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+			di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From c045006420813ed43c794ccf334c7b6116a16366 Mon Sep 17 00:00:00 2001
From: "Ben Dooks (Codethink)" <ben.dooks@codethink.co.uk>
Date: Tue, 15 Oct 2019 16:54:14 +0100
Subject: power: reset: at91: fix __le32 cast in reset code

The writel() takes standard integers, not __le32 so
fix the following sparse warnings by removing the
cpu_to_le32() calls.

drivers/power/reset/at91-reset.c:134:9: warning: cast from restricted __le32
drivers/power/reset/at91-reset.c:143:9: warning: cast from restricted __le32

This has made no code changes, the md5sums pre and post applying
this patch are the same. The at91 should be natively little endian
anyway.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/reset/at91-reset.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index 44ca983a49a1..d94e3267c3b6 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -131,7 +131,7 @@ static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode,
 static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
 			   void *cmd)
 {
-	writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST),
+	writel(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST,
 	       at91_rstc_base);
 
 	return NOTIFY_DONE;
@@ -140,9 +140,7 @@ static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
 static int samx7_restart(struct notifier_block *this, unsigned long mode,
 			 void *cmd)
 {
-	writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PROCRST),
-	       at91_rstc_base);
-
+	writel(AT91_RSTC_KEY | AT91_RSTC_PROCRST, at91_rstc_base);
 	return NOTIFY_DONE;
 }
 
-- 
cgit v1.2.3


From ccc023a58175565b91f6d1996cde4dfe93b04808 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: Fri, 4 Oct 2019 17:07:36 +0200
Subject: power: supply: ab8500: Cleanup probe in reverse order

It is logical to cleanup in probe's error path in reverse order to
previous actions.  It also makes easier to add additional goto labels
within this error path.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/ab8500_btemp.c | 4 ++--
 drivers/power/supply/ab8500_fg.c    | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index ad8c51ef8b8b..e9f536594770 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -1121,13 +1121,13 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	return ret;
 
 free_irq:
-	power_supply_unregister(di->btemp_psy);
-
 	/* We also have to free all successfully registered irqs */
 	for (i = i - 1; i >= 0; i--) {
 		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
 		free_irq(irq, di);
 	}
+
+	power_supply_unregister(di->btemp_psy);
 free_btemp_wq:
 	destroy_workqueue(di->btemp_wq);
 	return ret;
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index f7909dfd3b61..015f4676e2ba 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -3219,15 +3219,15 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	return ret;
 
 free_irq:
-	power_supply_unregister(di->fg_psy);
-
 	/* We also have to free all registered irqs */
+	irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
+	free_irq(irq, di);
 	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq_th); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_fg_irq_th[i].name);
 		free_irq(irq, di);
 	}
-	irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
-	free_irq(irq, di);
+
+	power_supply_unregister(di->fg_psy);
 free_inst_curr_wq:
 	destroy_workqueue(di->fg_wq);
 	return ret;
-- 
cgit v1.2.3


From 24108993278d67174a61f9ead38d4d9d1c001a14 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: Fri, 4 Oct 2019 17:07:37 +0200
Subject: power: supply: ab8500_fg: Do not free non-requested IRQs in probe's
 error path

When requesting interrupt fails, free only interrupts already requested,
not all of them.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/ab8500_fg.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 015f4676e2ba..8a81728749eb 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -3165,7 +3165,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 		if (ret != 0) {
 			dev_err(di->dev, "failed to request %s IRQ %d: %d\n",
 				ab8500_fg_irq_th[i].name, irq, ret);
-			goto free_irq;
+			goto free_irq_th;
 		}
 		dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
 			ab8500_fg_irq_th[i].name, irq, ret);
@@ -3180,7 +3180,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		dev_err(di->dev, "failed to request %s IRQ %d: %d\n",
 			ab8500_fg_irq_bh[0].name, irq, ret);
-		goto free_irq;
+		goto free_irq_th;
 	}
 	dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
 		ab8500_fg_irq_bh[0].name, irq, ret);
@@ -3222,7 +3222,9 @@ free_irq:
 	/* We also have to free all registered irqs */
 	irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
 	free_irq(irq, di);
-	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq_th); i++) {
+free_irq_th:
+	while (--i >= 0) {
+		/* Last assignment of i from primary interrupt handlers */
 		irq = platform_get_irq_byname(pdev, ab8500_fg_irq_th[i].name);
 		free_irq(irq, di);
 	}
-- 
cgit v1.2.3


From b10e97003d28f6c83edd79e17dfec91acfbb7377 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: Fri, 4 Oct 2019 17:07:38 +0200
Subject: power: supply: ab8500: Handle invalid IRQ from
 platform_get_irq_byname()

platform_get_irq_byname() might return -errno which later would be
cast to an unsigned int and used in request_irq().

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/ab8500_btemp.c   |  5 +++++
 drivers/power/supply/ab8500_charger.c |  5 +++++
 drivers/power/supply/ab8500_fg.c      | 10 ++++++++++
 3 files changed, 20 insertions(+)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index e9f536594770..909f0242bacb 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -1099,6 +1099,11 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	/* Register interrupts */
 	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+		if (irq < 0) {
+			ret = irq;
+			goto free_irq;
+		}
+
 		ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr,
 			IRQF_SHARED | IRQF_NO_SUSPEND,
 			ab8500_btemp_irq[i].name, di);
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index c053ede47eb2..ff2bb4411a22 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3594,6 +3594,11 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	/* Register interrupts */
 	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+		if (irq < 0) {
+			ret = irq;
+			goto free_irq;
+		}
+
 		ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr,
 			IRQF_SHARED | IRQF_NO_SUSPEND,
 			ab8500_charger_irq[i].name, di);
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 8a81728749eb..c3912ee9eb99 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -3158,6 +3158,11 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* Register primary interrupt handlers */
 	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq_th); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_fg_irq_th[i].name);
+		if (irq < 0) {
+			ret = irq;
+			goto free_irq_th;
+		}
+
 		ret = request_irq(irq, ab8500_fg_irq_th[i].isr,
 				  IRQF_SHARED | IRQF_NO_SUSPEND,
 				  ab8500_fg_irq_th[i].name, di);
@@ -3173,6 +3178,11 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 
 	/* Register threaded interrupt handler */
 	irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
+	if (irq < 0) {
+		ret = irq;
+		goto free_irq_th;
+	}
+
 	ret = request_threaded_irq(irq, NULL, ab8500_fg_irq_bh[0].isr,
 				IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
 			ab8500_fg_irq_bh[0].name, di);
-- 
cgit v1.2.3


From d4ee021c410f72bf2aacc61069ad6305120d2127 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 15:18:17 -0700
Subject: power: supply: cpcap-charger: Limit voltage to 4.2V for battery

There have been some cases of droid4 battery bulging that seem to be
related to being left connected to the charger for several weeks.

It is suspected that the 4.35V charge voltage configured for the battery
is too much in the long run, so lets limit the charge voltage to 4.2V.
It could also be that the batteries are just getting old.

We don't really want to just change the charge voltage to 4.2V as Android
may have charged the battery to 4.35V as pointed out by Pavel Machek.

To add checks for battery voltage, the driver needs to understand the
voltage it's charging at, and also needs to better understand it's
charger state. Right now it only understands connect and disconnect,
while now we need to know also a connected state but not charging.

So let's add better charger state handling with help of chrgcurr2 interrupt
for detecting charge full and retry, and add a check for battery voltage
before we start charging. And then we finally can lower the charge voltage
to 4.2V.

Note that we've been using the same register values as the Android distros
on droid4, so it is suspected that the same problem also exists in Android.

Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-charger.c | 132 ++++++++++++++++++++++++++++++++++-
 1 file changed, 130 insertions(+), 2 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index 74258c7fe17d..88bbab6e62f0 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -120,6 +120,13 @@ enum {
 	CPCAP_CHARGER_IIO_NR,
 };
 
+enum {
+	CPCAP_CHARGER_DISCONNECTED,
+	CPCAP_CHARGER_DETECTING,
+	CPCAP_CHARGER_CHARGING,
+	CPCAP_CHARGER_DONE,
+};
+
 struct cpcap_charger_ddata {
 	struct device *dev;
 	struct regmap *reg;
@@ -138,6 +145,8 @@ struct cpcap_charger_ddata {
 	atomic_t active;
 
 	int status;
+	int state;
+	int voltage;
 };
 
 struct cpcap_interrupt_desc {
@@ -153,6 +162,7 @@ struct cpcap_charger_ints_state {
 
 	bool chrg_se1b;
 	bool rvrs_mode;
+	bool chrgcurr2;
 	bool chrgcurr1;
 	bool vbusvld;
 
@@ -422,6 +432,7 @@ static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
 
 	s->chrg_se1b = val & BIT(13);
 	s->rvrs_mode = val & BIT(6);
+	s->chrgcurr2 = val & BIT(5);
 	s->chrgcurr1 = val & BIT(4);
 	s->vbusvld = val & BIT(3);
 
@@ -434,6 +445,79 @@ static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
 	return 0;
 }
 
+static void cpcap_charger_update_state(struct cpcap_charger_ddata *ddata,
+				       int state)
+{
+	const char *status;
+
+	if (state > CPCAP_CHARGER_DONE) {
+		dev_warn(ddata->dev, "unknown state: %i\n", state);
+
+		return;
+	}
+
+	ddata->state = state;
+
+	switch (state) {
+	case CPCAP_CHARGER_DISCONNECTED:
+		status = "DISCONNECTED";
+		break;
+	case CPCAP_CHARGER_DETECTING:
+		status = "DETECTING";
+		break;
+	case CPCAP_CHARGER_CHARGING:
+		status = "CHARGING";
+		break;
+	case CPCAP_CHARGER_DONE:
+		status = "DONE";
+		break;
+	default:
+		return;
+	}
+
+	dev_dbg(ddata->dev, "state: %s\n", status);
+}
+
+int cpcap_charger_voltage_to_regval(int voltage)
+{
+	int offset;
+
+	switch (voltage) {
+	case 0 ... 4100000 - 1:
+		return 0;
+	case 4100000 ... 4200000 - 1:
+		offset = 1;
+		break;
+	case 4200000 ... 4300000 - 1:
+		offset = 0;
+		break;
+	case 4300000 ... 4380000 - 1:
+		offset = -1;
+		break;
+	case 4380000 ... 4440000:
+		offset = -2;
+		break;
+	default:
+		return 0;
+	}
+
+	return ((voltage - 4100000) / 20000) + offset;
+}
+
+static void cpcap_charger_disconnect(struct cpcap_charger_ddata *ddata,
+				     int state, unsigned long delay)
+{
+	int error;
+
+	error = cpcap_charger_set_state(ddata, 0, 0, 0);
+	if (error)
+		return;
+
+	cpcap_charger_update_state(ddata, state);
+	power_supply_changed(ddata->usb);
+	schedule_delayed_work(&ddata->detect_work, delay);
+}
+
 static void cpcap_usb_detect(struct work_struct *work)
 {
 	struct cpcap_charger_ddata *ddata;
@@ -447,24 +531,67 @@ static void cpcap_usb_detect(struct work_struct *work)
 	if (error)
 		return;
 
+	/* Just init the state if a charger is connected with no chrg_det set */
+	if (!s.chrg_det && s.chrgcurr1 && s.vbusvld) {
+		cpcap_charger_update_state(ddata, CPCAP_CHARGER_DETECTING);
+
+		return;
+	}
+
+	/*
+	 * If battery voltage is higher than charge voltage, it may have been
+	 * charged to 4.35V by Android. Try again in 10 minutes.
+	 */
+	if (cpcap_charger_get_charge_voltage(ddata) > ddata->voltage) {
+		cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DETECTING,
+					 HZ * 60 * 10);
+
+		return;
+	}
+
+	/* Throttle chrgcurr2 interrupt for charger done and retry */
+	switch (ddata->state) {
+	case CPCAP_CHARGER_CHARGING:
+		if (s.chrgcurr2)
+			break;
+		if (s.chrgcurr1 && s.vbusvld) {
+			cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DONE,
+						 HZ * 5);
+			return;
+		}
+		break;
+	case CPCAP_CHARGER_DONE:
+		if (!s.chrgcurr2)
+			break;
+		cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DETECTING,
+					 HZ * 5);
+		return;
+	default:
+		break;
+	}
+
 	if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
 	    s.chrgcurr1) {
 		int max_current;
+		int vchrg;
 
 		if (cpcap_charger_battery_found(ddata))
 			max_current = CPCAP_REG_CRM_ICHRG_1A596;
 		else
 			max_current = CPCAP_REG_CRM_ICHRG_0A532;
 
+		vchrg = cpcap_charger_voltage_to_regval(ddata->voltage);
 		error = cpcap_charger_set_state(ddata,
-						CPCAP_REG_CRM_VCHRG_4V35,
+						CPCAP_REG_CRM_VCHRG(vchrg),
 						max_current, 0);
 		if (error)
 			goto out_err;
+		cpcap_charger_update_state(ddata, CPCAP_CHARGER_CHARGING);
 	} else {
 		error = cpcap_charger_set_state(ddata, 0, 0, 0);
 		if (error)
 			goto out_err;
+		cpcap_charger_update_state(ddata, CPCAP_CHARGER_DISCONNECTED);
 	}
 
 	power_supply_changed(ddata->usb);
@@ -524,7 +651,7 @@ static const char * const cpcap_charger_irqs[] = {
 	"chrg_det", "rvrs_chrg",
 
 	/* REG_INT1 */
-	"chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr1", "vbusvld",
+	"chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
 
 	/* REG_INT_3 */
 	"battdetb",
@@ -625,6 +752,7 @@ static int cpcap_charger_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ddata->dev = &pdev->dev;
+	ddata->voltage = 4200000;
 
 	ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
 	if (!ddata->reg)
-- 
cgit v1.2.3


From 639c1524da3b273d20c42ff2387d08eb4b12e903 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 15:30:04 -0700
Subject: power: supply: cpcap-battery: Check voltage before orderly_poweroff

We can get the low voltage interrupt trigger sometimes way too early,
maybe because of CPU load spikes. This causes orderly_poweroff() be
called too easily.

Let's check the voltage before orderly_poweroff in case it was not
yet a permanent condition. We will be getting more interrupts anyways
if the condition persists.

Let's also show the measured voltages for low battery and battery
empty warnings since we have them.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-battery.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index 61d6447d1966..00a96e4a1cdc 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -562,12 +562,14 @@ static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
 	switch (d->action) {
 	case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW:
 		if (latest->current_ua >= 0)
-			dev_warn(ddata->dev, "Battery low at 3.3V!\n");
+			dev_warn(ddata->dev, "Battery low at %imV!\n",
+				latest->voltage / 1000);
 		break;
 	case CPCAP_BATTERY_IRQ_ACTION_POWEROFF:
-		if (latest->current_ua >= 0) {
+		if (latest->current_ua >= 0 && latest->voltage <= 3200000) {
 			dev_emerg(ddata->dev,
-				  "Battery empty at 3.1V, powering off\n");
+				  "Battery empty at %imV, powering off\n",
+				  latest->voltage / 1000);
 			orderly_poweroff(true);
 		}
 		break;
-- 
cgit v1.2.3


From 50fc99f83f102c60a9429f451594019a6a978103 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 15:30:05 -0700
Subject: power: supply: cpcap-charger: Improve battery detection

We are currently using a wrong ADC range for the battery detection.
The ADC returns the battery temperature if connected.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-charger.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index 88bbab6e62f0..a04354c8f1e3 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -176,20 +176,21 @@ static enum power_supply_property cpcap_charger_props[] = {
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
+/* No battery always shows temperature of -40000 */
 static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata)
 {
 	struct iio_channel *channel;
-	int error, value;
+	int error, temperature;
 
 	channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET];
-	error = iio_read_channel_raw(channel, &value);
+	error = iio_read_channel_processed(channel, &temperature);
 	if (error < 0) {
 		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
 
 		return false;
 	}
 
-	return value == 1;
+	return temperature > -20000 && temperature < 60000;
 }
 
 static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata)
-- 
cgit v1.2.3


From 8b0134cc14b9d4dba4477489c11f7c634c382e3e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 15:41:21 -0700
Subject: power: supply: cpcap-battery: Fix handling of lowered charger voltage

With cpcap-charger now using 4.2V instead of 4.35V, we never reach
POWER_SUPPLY_CAPACITY_LEVEL_FULL unless we handle the lowered charge
voltage.

Let's do this by implementing POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
and assume anything at that level or higher is a full battery.

Let's also make it configurable for users who may still want to
reconfigure it, and notify the charger if supported by the charger.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-battery.c | 85 +++++++++++++++++++++++++++++++++---
 1 file changed, 78 insertions(+), 7 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index 00a96e4a1cdc..1640c39ead56 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -79,6 +79,7 @@ struct cpcap_battery_config {
 	int ccm;
 	int cd_factor;
 	struct power_supply_info info;
+	struct power_supply_battery_info bat;
 };
 
 struct cpcap_coulomb_counter_data {
@@ -369,8 +370,8 @@ static bool cpcap_battery_full(struct cpcap_battery_ddata *ddata)
 {
 	struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata);
 
-	/* Basically anything that measures above 4347000 is full */
-	if (state->voltage >= (ddata->config.info.voltage_max_design - 4000))
+	if (state->voltage >=
+	    (ddata->config.bat.constant_charge_voltage_max_uv - 18000))
 		return true;
 
 	return false;
@@ -417,6 +418,7 @@ static enum power_supply_property cpcap_battery_props[] = {
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_CURRENT_AVG,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
@@ -475,6 +477,9 @@ static int cpcap_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = ddata->config.info.voltage_min_design;
 		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = ddata->config.bat.constant_charge_voltage_max_uv;
+		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 		sample = latest->cc.sample - previous->cc.sample;
 		if (!sample) {
@@ -540,6 +545,69 @@ static int cpcap_battery_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int cpcap_battery_update_charger(struct cpcap_battery_ddata *ddata,
+					int const_charge_voltage)
+{
+	union power_supply_propval prop;
+	union power_supply_propval val;
+	struct power_supply *charger;
+	int error;
+
+	charger = power_supply_get_by_name("usb");
+	if (!charger)
+		return -ENODEV;
+
+	error = power_supply_get_property(charger,
+				POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+				&prop);
+	if (error)
+		return error;
+
+	/* Allow charger const voltage lower than battery const voltage */
+	if (const_charge_voltage > prop.intval)
+		return 0;
+
+	val.intval = const_charge_voltage;
+
+	return power_supply_set_property(charger,
+			POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+			&val);
+}
+
+static int cpcap_battery_set_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      const union power_supply_propval *val)
+{
+	struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		if (val->intval < ddata->config.info.voltage_min_design)
+			return -EINVAL;
+		if (val->intval > ddata->config.info.voltage_max_design)
+			return -EINVAL;
+
+		ddata->config.bat.constant_charge_voltage_max_uv = val->intval;
+
+		return cpcap_battery_update_charger(ddata, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_battery_property_is_writeable(struct power_supply *psy,
+					       enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
 {
 	struct cpcap_battery_ddata *ddata = data;
@@ -695,6 +763,7 @@ static const struct cpcap_battery_config cpcap_battery_default_data = {
 	.info.voltage_max_design = 4351000,
 	.info.voltage_min_design = 3100000,
 	.info.charge_full_design = 1740000,
+	.bat.constant_charge_voltage_max_uv = 4200000,
 };
 
 #ifdef CONFIG_OF
@@ -762,11 +831,13 @@ static int cpcap_battery_probe(struct platform_device *pdev)
 	if (!psy_desc)
 		return -ENOMEM;
 
-	psy_desc->name = "battery",
-	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY,
-	psy_desc->properties = cpcap_battery_props,
-	psy_desc->num_properties = ARRAY_SIZE(cpcap_battery_props),
-	psy_desc->get_property = cpcap_battery_get_property,
+	psy_desc->name = "battery";
+	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+	psy_desc->properties = cpcap_battery_props;
+	psy_desc->num_properties = ARRAY_SIZE(cpcap_battery_props);
+	psy_desc->get_property = cpcap_battery_get_property;
+	psy_desc->set_property = cpcap_battery_set_property;
+	psy_desc->property_is_writeable = cpcap_battery_property_is_writeable;
 
 	psy_cfg.of_node = pdev->dev.of_node;
 	psy_cfg.drv_data = ddata;
-- 
cgit v1.2.3


From 5688ea0492337517f9e9e1249e4f5e371726bc21 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 16 Oct 2019 15:41:22 -0700
Subject: power: supply: cpcap-charger: Allow changing constant charge voltage

Let's allow reconfiguring the cpcap-charger max charge voltage and
default to 4.2V that should be safe for the known users.

This allows the users to use 4.35V for the extra capacity if really
needed at a cost of probably shorter battery life. We check the
constant charge voltage limit set by the battery.

Some pieces of the property setting code is based on an earlier patch
from Pavel Machek <pavel@ucw.cz> but limited to configuring the charge
voltage for now.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-charger.c | 83 ++++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index a04354c8f1e3..40d96b8c00a8 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -172,6 +172,7 @@ struct cpcap_charger_ints_state {
 static enum power_supply_property cpcap_charger_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
@@ -235,6 +236,9 @@ static int cpcap_charger_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_STATUS:
 		val->intval = ddata->status;
 		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = ddata->voltage;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
 			val->intval = cpcap_charger_get_charge_voltage(ddata) *
@@ -259,6 +263,83 @@ static int cpcap_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int cpcap_charger_match_voltage(int voltage)
+{
+	switch (voltage) {
+	case 0 ... 4100000 - 1: return 3800000;
+	case 4100000 ... 4120000 - 1: return 4100000;
+	case 4120000 ... 4150000 - 1: return 4120000;
+	case 4150000 ... 4170000 - 1: return 4150000;
+	case 4170000 ... 4200000 - 1: return 4170000;
+	case 4200000 ... 4230000 - 1: return 4200000;
+	case 4230000 ... 4250000 - 1: return 4230000;
+	case 4250000 ... 4270000 - 1: return 4250000;
+	case 4270000 ... 4300000 - 1: return 4270000;
+	case 4300000 ... 4330000 - 1: return 4300000;
+	case 4330000 ... 4350000 - 1: return 4330000;
+	case 4350000 ... 4380000 - 1: return 4350000;
+	case 4380000 ... 4400000 - 1: return 4380000;
+	case 4400000 ... 4420000 - 1: return 4400000;
+	case 4420000 ... 4440000 - 1: return 4420000;
+	case 4440000: return 4440000;
+	default: return 0;
+	}
+}
+
+static int
+cpcap_charger_get_bat_const_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+	union power_supply_propval prop;
+	struct power_supply *battery;
+	int voltage = ddata->voltage;
+	int error;
+
+	battery = power_supply_get_by_name("battery");
+	if (battery) {
+		error = power_supply_get_property(battery,
+				POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+				&prop);
+		if (!error)
+			voltage = prop.intval;
+	}
+
+	return voltage;
+}
+
+static int cpcap_charger_set_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      const union power_supply_propval *val)
+{
+	struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+	int voltage, batvolt;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		voltage = cpcap_charger_match_voltage(val->intval);
+		batvolt = cpcap_charger_get_bat_const_charge_voltage(ddata);
+		if (voltage > batvolt)
+			voltage = batvolt;
+		ddata->voltage = voltage;
+		schedule_delayed_work(&ddata->detect_work, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_charger_property_is_writeable(struct power_supply *psy,
+					       enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata,
 					 bool enabled)
 {
@@ -724,6 +805,8 @@ static const struct power_supply_desc cpcap_charger_usb_desc = {
 	.properties	= cpcap_charger_props,
 	.num_properties	= ARRAY_SIZE(cpcap_charger_props),
 	.get_property	= cpcap_charger_get_property,
+	.set_property	= cpcap_charger_set_property,
+	.property_is_writeable = cpcap_charger_property_is_writeable,
 };
 
 #ifdef CONFIG_OF
-- 
cgit v1.2.3


From 458f5c8cda45fa599c8d984b41ea12c7169bdcd4 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 9 Oct 2019 14:06:17 -0700
Subject: power: supply: cpcap-battery: Move coulomb counter units per lsb to
 ddata

We can simplify cpcap_battery_cc_raw_div() a bit by moving the units per
lsb to ddata.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-battery.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index 1640c39ead56..914e3ddfd80b 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -111,6 +111,7 @@ struct cpcap_battery_ddata {
 	struct power_supply *psy;
 	struct cpcap_battery_config config;
 	struct cpcap_battery_state_data state[CPCAP_BATTERY_STATE_NR];
+	u32 cc_lsb;		/* μAms per LSB */
 	atomic_t active;
 	int status;
 	u16 vendor;
@@ -220,32 +221,19 @@ static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
 	s64 acc;
 	u64 tmp;
 	int avg_current;
-	u32 cc_lsb;
 
 	if (!divider)
 		return 0;
 
-	switch (ddata->vendor) {
-	case CPCAP_VENDOR_ST:
-		cc_lsb = 95374;		/* μAms per LSB */
-		break;
-	case CPCAP_VENDOR_TI:
-		cc_lsb = 91501;		/* μAms per LSB */
-		break;
-	default:
-		return -EINVAL;
-	}
-
 	acc = accumulator;
 	acc = acc - ((s64)sample * offset);
-	cc_lsb = (cc_lsb * ddata->config.cd_factor) / 1000;
 
 	if (acc >=  0)
 		tmp = acc;
 	else
 		tmp = acc * -1;
 
-	tmp = tmp * cc_lsb;
+	tmp = tmp * ddata->cc_lsb;
 	do_div(tmp, divider);
 	avg_current = tmp;
 
@@ -812,6 +800,18 @@ static int cpcap_battery_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
+	switch (ddata->vendor) {
+	case CPCAP_VENDOR_ST:
+		ddata->cc_lsb = 95374;	/* μAms per LSB */
+		break;
+	case CPCAP_VENDOR_TI:
+		ddata->cc_lsb = 91501;	/* μAms per LSB */
+		break;
+	default:
+		return -EINVAL;
+	}
+	ddata->cc_lsb = (ddata->cc_lsb * ddata->config.cd_factor) / 1000;
+
 	platform_set_drvdata(pdev, ddata);
 
 	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCM,
-- 
cgit v1.2.3


From c59b3bad6fd83a42c73ec6ef6609af4882dfbcb3 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 9 Oct 2019 14:06:18 -0700
Subject: power: supply: cpcap-battery: Simplify coulomb counter calculation
 with div_s64

We can simplify cpcap_battery_cc_raw_div() with div_s64.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-battery.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index 914e3ddfd80b..5e5be424196a 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -33,8 +33,6 @@
 #include <linux/iio/types.h>
 #include <linux/mfd/motorola-cpcap.h>
 
-#include <asm/div64.h>
-
 /*
  * Register bit defines for CPCAP_REG_BPEOL. Some of these seem to
  * map to MC13783UG.pdf "Table 5-19. Register 13, Power Control 0"
@@ -219,28 +217,17 @@ static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
 				    s16 offset, u32 divider)
 {
 	s64 acc;
-	u64 tmp;
-	int avg_current;
 
 	if (!divider)
 		return 0;
 
 	acc = accumulator;
-	acc = acc - ((s64)sample * offset);
-
-	if (acc >=  0)
-		tmp = acc;
-	else
-		tmp = acc * -1;
+	acc -= (s64)sample * offset;
+	acc *= ddata->cc_lsb;
+	acc *= -1;
+	acc = div_s64(acc, divider);
 
-	tmp = tmp * ddata->cc_lsb;
-	do_div(tmp, divider);
-	avg_current = tmp;
-
-	if (acc >= 0)
-		return -avg_current;
-	else
-		return avg_current;
+	return acc;
 }
 
 /* 3600000μAms = 1μAh */
-- 
cgit v1.2.3


From ac437c1c8438027d08f115445e5963397c04ce5b Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 9 Oct 2019 14:06:19 -0700
Subject: power: supply: cpcap-battery: Simplify short term power average
 calculation

We can use sign_extend32() here to simplify things. And let's fix the
comment for CCM register, that contains the calibration offset.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-battery.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index 5e5be424196a..cb4edb85a2fc 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -312,31 +312,28 @@ cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
 static int cpcap_battery_cc_get_avg_current(struct cpcap_battery_ddata *ddata)
 {
 	int value, acc, error;
-	s32 sample = 1;
+	s32 sample;
 	s16 offset;
 
-	if (ddata->vendor == CPCAP_VENDOR_ST)
-		sample = 4;
-
 	/* Coulomb counter integrator */
 	error = regmap_read(ddata->reg, CPCAP_REG_CCI, &value);
 	if (error)
 		return error;
 
-	if ((ddata->vendor == CPCAP_VENDOR_TI) && (value > 0x2000))
-		value = value | 0xc000;
-
-	acc = (s16)value;
+	if (ddata->vendor == CPCAP_VENDOR_TI) {
+		acc = sign_extend32(value, 13);
+		sample = 1;
+	} else {
+		acc = (s16)value;
+		sample = 4;
+	}
 
-	/* Coulomb counter sample time */
+	/* Coulomb counter calibration offset  */
 	error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
 	if (error)
 		return error;
 
-	if (value < 0x200)
-		offset = value;
-	else
-		offset = value | 0xfc00;
+	offset = sign_extend32(value, 9);
 
 	return cpcap_battery_cc_to_ua(ddata, sample, acc, offset);
 }
-- 
cgit v1.2.3


From b28ac41950c84d6a9787255a15dcaf2369735464 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 9 Oct 2019 14:06:20 -0700
Subject: power: supply: cpcap-battery: Read and save integrator register CCI

We can simplify code in the later patches by reading and saving the
integrator register CCI. Let's also fix a comment typo for register range
naming while at it.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-battery.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index cb4edb85a2fc..c3d45c1cfac1 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -84,6 +84,7 @@ struct cpcap_coulomb_counter_data {
 	s32 sample;		/* 24 or 32 bits */
 	s32 accumulator;
 	s16 offset;		/* 9 bits */
+	s16 integrator;		/* 13 or 16 bits */
 };
 
 enum cpcap_battery_state {
@@ -269,12 +270,13 @@ static int
 cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
 			       struct cpcap_coulomb_counter_data *ccd)
 {
-	u16 buf[7];	/* CPCAP_REG_CC1 to CCI */
+	u16 buf[7];	/* CPCAP_REG_CCS1 to CCI */
 	int error;
 
 	ccd->sample = 0;
 	ccd->accumulator = 0;
 	ccd->offset = 0;
+	ccd->integrator = 0;
 
 	/* Read coulomb counter register range */
 	error = regmap_bulk_read(ddata->reg, CPCAP_REG_CCS1,
@@ -299,6 +301,12 @@ cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
 	ccd->offset = buf[4];
 	ccd->offset = sign_extend32(ccd->offset, 9);
 
+	/* Integrator register CPCAP_REG_CCI */
+	if (ddata->vendor == CPCAP_VENDOR_TI)
+		ccd->integrator = sign_extend32(buf[6], 13);
+	else
+		ccd->integrator = (s16)buf[6];
+
 	return cpcap_battery_cc_to_uah(ddata,
 				       ccd->sample,
 				       ccd->accumulator,
-- 
cgit v1.2.3


From 0cb90f071f736b51b36ca0f761cf1152ebe46600 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 9 Oct 2019 14:06:21 -0700
Subject: power: supply: cpcap-battery: Add basic coulomb counter calibrate
 support

This patch adds support for the coulomb counter calibration on init. We do
this by polling for now, and only add partial calibration done interrupt
support.

Then later on when we know for sure we have the calibration done interrupt
available in the device tree, we can switch to using the calibration done
interrupt.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-battery.c | 96 +++++++++++++++++++++++++++++++++---
 1 file changed, 88 insertions(+), 8 deletions(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index c3d45c1cfac1..6e9392901b0a 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -50,6 +50,26 @@
 #define CPCAP_REG_BPEOL_BIT_BATTDETEN	BIT(1)	/* Enable battery detect */
 #define CPCAP_REG_BPEOL_BIT_EOLSEL	BIT(0)	/* BPDET = 0, EOL = 1 */
 
+/*
+ * Register bit defines for CPCAP_REG_CCC1. These seem similar to the twl6030
+ * coulomb counter registers rather than the mc13892 registers. Both twl6030
+ * and mc13892 set bits 2 and 1 to reset and clear registers. But mc13892
+ * sets bit 0 to start the coulomb counter while twl6030 sets bit 0 to stop
+ * the coulomb counter like cpcap does. So for now, we use the twl6030 style
+ * naming for the registers.
+ */
+#define CPCAP_REG_CCC1_ACTIVE_MODE1	BIT(4)	/* Update rate */
+#define CPCAP_REG_CCC1_ACTIVE_MODE0	BIT(3)	/* Update rate */
+#define CPCAP_REG_CCC1_AUTOCLEAR	BIT(2)	/* Resets sample registers */
+#define CPCAP_REG_CCC1_CAL_EN		BIT(1)	/* Clears after write in 1s */
+#define CPCAP_REG_CCC1_PAUSE		BIT(0)	/* Stop counters, allow write */
+#define CPCAP_REG_CCC1_RESET_MASK	(CPCAP_REG_CCC1_AUTOCLEAR | \
+					 CPCAP_REG_CCC1_CAL_EN)
+
+#define CPCAP_REG_CCCC2_RATE1		BIT(5)
+#define CPCAP_REG_CCCC2_RATE0		BIT(4)
+#define CPCAP_REG_CCCC2_ENABLE		BIT(3)
+
 #define CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS	250
 
 enum {
@@ -62,6 +82,7 @@ enum {
 
 enum cpcap_battery_irq_action {
 	CPCAP_BATTERY_IRQ_ACTION_NONE,
+	CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE,
 	CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW,
 	CPCAP_BATTERY_IRQ_ACTION_POWEROFF,
 };
@@ -74,7 +95,6 @@ struct cpcap_interrupt_desc {
 };
 
 struct cpcap_battery_config {
-	int ccm;
 	int cd_factor;
 	struct power_supply_info info;
 	struct power_supply_battery_info bat;
@@ -608,6 +628,9 @@ static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
 	latest = cpcap_battery_latest(ddata);
 
 	switch (d->action) {
+	case CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE:
+		dev_info(ddata->dev, "Coulomb counter calibration done\n");
+		break;
 	case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW:
 		if (latest->current_ua >= 0)
 			dev_warn(ddata->dev, "Battery low at %imV!\n",
@@ -659,7 +682,9 @@ static int cpcap_battery_init_irq(struct platform_device *pdev,
 	d->name = name;
 	d->irq = irq;
 
-	if (!strncmp(name, "lowbph", 6))
+	if (!strncmp(name, "cccal", 5))
+		d->action = CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE;
+	else if (!strncmp(name, "lowbph", 6))
 		d->action = CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW;
 	else if (!strncmp(name, "lowbpl", 6))
 		d->action = CPCAP_BATTERY_IRQ_ACTION_POWEROFF;
@@ -685,6 +710,9 @@ static int cpcap_battery_init_interrupts(struct platform_device *pdev,
 			return error;
 	}
 
+	/* Enable calibration interrupt if already available in dts */
+	cpcap_battery_init_irq(pdev, ddata, "cccal");
+
 	/* Enable low battery interrupts for 3.3V high and 3.1V low */
 	error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
 				   0xffff,
@@ -726,6 +754,60 @@ out_err:
 	return error;
 }
 
+/* Calibrate coulomb counter */
+static int cpcap_battery_calibrate(struct cpcap_battery_ddata *ddata)
+{
+	int error, ccc1, value;
+	unsigned long timeout;
+
+	error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &ccc1);
+	if (error)
+		return error;
+
+	timeout = jiffies + msecs_to_jiffies(6000);
+
+	/* Start calibration */
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+				   0xffff,
+				   CPCAP_REG_CCC1_CAL_EN);
+	if (error)
+		goto restore;
+
+	while (time_before(jiffies, timeout)) {
+		error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &value);
+		if (error)
+			goto restore;
+
+		if (!(value & CPCAP_REG_CCC1_CAL_EN))
+			break;
+
+		error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+		if (error)
+			goto restore;
+
+		msleep(300);
+	}
+
+	/* Read calibration offset from CCM */
+	error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+	if (error)
+		goto restore;
+
+	dev_info(ddata->dev, "calibration done: 0x%04x\n", value);
+
+restore:
+	if (error)
+		dev_err(ddata->dev, "%s: error %i\n", __func__, error);
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+				   0xffff, ccc1);
+	if (error)
+		dev_err(ddata->dev, "%s: restore error %i\n",
+			__func__, error);
+
+	return error;
+}
+
 /*
  * Based on the values from Motorola mapphone Linux kernel. In the
  * the Motorola mapphone Linux kernel tree the value for pm_cd_factor
@@ -737,7 +819,6 @@ out_err:
  * at 3078000. The device will die around 2743000.
  */
 static const struct cpcap_battery_config cpcap_battery_default_data = {
-	.ccm = 0x3ff,
 	.cd_factor = 0x3cc,
 	.info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
 	.info.voltage_max_design = 4351000,
@@ -806,11 +887,6 @@ static int cpcap_battery_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ddata);
 
-	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCM,
-				   0xffff, ddata->config.ccm);
-	if (error)
-		return error;
-
 	error = cpcap_battery_init_interrupts(pdev, ddata);
 	if (error)
 		return error;
@@ -844,6 +920,10 @@ static int cpcap_battery_probe(struct platform_device *pdev)
 
 	atomic_set(&ddata->active, 1);
 
+	error = cpcap_battery_calibrate(ddata);
+	if (error)
+		return error;
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From e3da2ce04e120b4b035793f6eb87b459a505e88b Mon Sep 17 00:00:00 2001
From: kbuild test robot <lkp@intel.com>
Date: Mon, 21 Oct 2019 06:20:52 +0800
Subject: power: supply: cpcap-charger: cpcap_charger_voltage_to_regval() can
 be static

Add 'static' keyword to internal function as reported by sparse
using the following configuration:

make ARCH=x86_64 allmodconfig
make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'

Fixes: d4ee021c410f ("power: supply: cpcap-charger: Limit voltage to 4.2V for battery")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/cpcap-charger.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index 40d96b8c00a8..c0d452e3dc8b 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -560,7 +560,7 @@ static void cpcap_charger_update_state(struct cpcap_charger_ddata *ddata,
 	dev_dbg(ddata->dev, "state: %s\n", status);
 }
 
-int cpcap_charger_voltage_to_regval(int voltage)
+static int cpcap_charger_voltage_to_regval(int voltage)
 {
 	int offset;
 
-- 
cgit v1.2.3


From f457055a7922154bb786e5d55f75b461fa645e9a Mon Sep 17 00:00:00 2001
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Date: Mon, 21 Oct 2019 12:49:37 -0500
Subject: power: supply: ab8500_charger: Fix inconsistent IS_ERR and PTR_ERR

Fix inconsistent IS_ERR and PTR_ERR in ab8500_charger_probe().

The proper pointer to be passed as argument is di->adc_main_charger_c

This bug was detected with the help of Coccinelle.

Fixes: 97ab78bac5d0 ("power: supply: ab8500_charger: Convert to IIO ADC")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/ab8500_charger.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index ff2bb4411a22..8a0f9d769690 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3393,7 +3393,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 		if (PTR_ERR(di->adc_main_charger_c) == -ENODEV)
 			return -EPROBE_DEFER;
 		dev_err(&pdev->dev, "failed to get ADC main charger current\n");
-		return PTR_ERR(di->adc_main_charger_v);
+		return PTR_ERR(di->adc_main_charger_c);
 	}
 	di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
 	if (IS_ERR(di->adc_vbus_v)) {
-- 
cgit v1.2.3


From 9480029fe5c24d482efad38dc631bd555fc7afe2 Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Wed, 23 Oct 2019 15:35:24 +0300
Subject: power: supply: bd70528: Add MODULE_ALIAS to allow module auto loading

The bd70528 charger driver is probed by MFD driver. Add MODULE_ALIAS
in order to allow udev to load the module when MFD sub-device cell for
charger is added.

Fixes: f8c7f7ddd8ef0 ("power: supply: Initial support for ROHM BD70528 PMIC charger block")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/bd70528-charger.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/power')

diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c
index 1bb32b7226d7..b8e1ec106627 100644
--- a/drivers/power/supply/bd70528-charger.c
+++ b/drivers/power/supply/bd70528-charger.c
@@ -741,3 +741,4 @@ module_platform_driver(bd70528_power);
 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
 MODULE_DESCRIPTION("BD70528 power-supply driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd70528-power");
-- 
cgit v1.2.3