From 6f354b014b51716166f13f68b29212d3c44ed2c4 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Wed, 6 Jul 2005 15:29:53 -0700 Subject: [IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code This patch is the SGI hotplug driver and additional changes required for the driver. These modifications include changes to the SN io_init.c code for memory management, the inclusion of new SAL calls to enable and disable PCI slots, and a hotplug-style driver. Signed-off-by: Prarit Bhargava Signed-off-by: Tony Luck --- drivers/pci/hotplug/Kconfig | 5 +- drivers/pci/hotplug/Makefile | 1 + drivers/pci/hotplug/sgi_hotplug.c | 611 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 615 insertions(+), 2 deletions(-) create mode 100644 drivers/pci/hotplug/sgi_hotplug.c (limited to 'drivers/pci/hotplug') diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 1a4d4ca2a4dc..9c4a39ee89b5 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -187,9 +187,10 @@ config HOTPLUG_PCI_RPA_DLPAR config HOTPLUG_PCI_SGI tristate "SGI PCI Hotplug Support" - depends on HOTPLUG_PCI && IA64_SGI_SN2 + depends on HOTPLUG_PCI && (IA64_SGI_SN2 || IA64_GENERIC) help - Say Y here if you have an SGI IA64 Altix system. + Say Y here if you want to use the SGI Altix Hotplug + Driver for PCI devices. When in doubt, say N. diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index 3e632ff8c717..31a307004b94 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o +obj-$(CONFIG_HOTPLUG_PCI_SGI) += sgi_hotplug.o pci_hotplug-objs := pci_hotplug_core.o diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c new file mode 100644 index 000000000000..323041fd41dc --- /dev/null +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -0,0 +1,611 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Silicon Graphics, Inc. All rights reserved. + * + * This work was based on the 2.4/2.6 kernel development by Dick Reigner. + * Work to add BIOS PROM support was completed by Mike Habeck. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../pci.h" +#include "pci_hotplug.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("SGI (prarit@sgi.com, dickie@sgi.com, habeck@sgi.com)"); +MODULE_DESCRIPTION("SGI Altix Hot Plug PCI Controller Driver"); + +#define PCIIO_ASIC_TYPE_TIOCA 4 +#define PCI_SLOT_ALREADY_UP 2 /* slot already up */ +#define PCI_SLOT_ALREADY_DOWN 3 /* slot already down */ +#define PCI_L1_ERR 7 /* L1 console command error */ +#define PCI_EMPTY_33MHZ 15 /* empty 33 MHz bus */ +#define PCI_L1_QSIZE 128 /* our L1 message buffer size */ +#define SN_MAX_HP_SLOTS 32 /* max number of hotplug slots */ +#define SGI_HOTPLUG_PROM_REV 0x0420 /* Min. required PROM version */ + +/* internal list head */ +static struct list_head sn_hp_list; + +/* hotplug_slot struct's private pointer */ +struct slot { + int device_num; + struct pci_bus *pci_bus; + /* this struct for glue internal only */ + struct hotplug_slot *hotplug_slot; + struct list_head hp_list; +}; + +struct pcibr_slot_enable_resp { + int resp_sub_errno; + char resp_l1_msg[PCI_L1_QSIZE + 1]; +}; + +struct pcibr_slot_disable_resp { + int resp_sub_errno; + char resp_l1_msg[PCI_L1_QSIZE + 1]; +}; + +enum sn_pci_req_e { + PCI_REQ_SLOT_ELIGIBLE, + PCI_REQ_SLOT_DISABLE +}; + +static int enable_slot(struct hotplug_slot *slot); +static int disable_slot(struct hotplug_slot *slot); +static int get_power_status(struct hotplug_slot *slot, u8 *value); + +static struct hotplug_slot_ops sn_hotplug_slot_ops = { + .owner = THIS_MODULE, + .enable_slot = enable_slot, + .disable_slot = disable_slot, + .get_power_status = get_power_status, +}; + +static DECLARE_MUTEX(sn_hotplug_sem); + +static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device) +{ + struct pcibus_info *pcibus_info; + int bricktype; + int bus_num; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus); + + /* Check to see if this is a valid slot on 'pci_bus' */ + if (!(pcibus_info->pbi_valid_devices & (1 << device))) + return -EPERM; + + bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid); + bus_num = pcibus_info->pbi_buscommon.bs_persist_busnum & 0xf; + + /* Do not allow hotplug operations on base I/O cards */ + if ((bricktype == L1_BRICKTYPE_IX || bricktype == L1_BRICKTYPE_IA) && + (bus_num == 1 && device != 1)) + return -EPERM; + + return 1; +} + +static int sn_pci_bus_valid(struct pci_bus *pci_bus) +{ + struct pcibus_info *pcibus_info; + int asic_type; + int bricktype; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus); + + /* Don't register slots hanging off the TIOCA bus */ + asic_type = pcibus_info->pbi_buscommon.bs_asic_type; + if (asic_type == PCIIO_ASIC_TYPE_TIOCA) + return -EPERM; + + /* Only register slots in I/O Bricks that support hotplug */ + bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid); + switch (bricktype) { + case L1_BRICKTYPE_IX: + case L1_BRICKTYPE_PX: + case L1_BRICKTYPE_IA: + case L1_BRICKTYPE_PA: + return 1; + break; + default: + return -EPERM; + break; + } + + return -EIO; +} + +static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot, + struct pci_bus *pci_bus, int device) +{ + struct pcibus_info *pcibus_info; + struct slot *slot; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus); + + bss_hotplug_slot->private = kcalloc(1, sizeof(struct slot), + GFP_KERNEL); + if (!bss_hotplug_slot->private) + return -ENOMEM; + slot = (struct slot *)bss_hotplug_slot->private; + + bss_hotplug_slot->name = kmalloc(33, GFP_KERNEL); + if (!bss_hotplug_slot->name) { + kfree(bss_hotplug_slot->private); + return -ENOMEM; + } + + slot->device_num = device; + slot->pci_bus = pci_bus; + + sprintf(bss_hotplug_slot->name, "module_%c%c%c%c%.2d_b_%d_s_%d", + '0'+RACK_GET_CLASS(MODULE_GET_RACK(pcibus_info->pbi_moduleid)), + '0'+RACK_GET_GROUP(MODULE_GET_RACK(pcibus_info->pbi_moduleid)), + '0'+RACK_GET_NUM(MODULE_GET_RACK(pcibus_info->pbi_moduleid)), + MODULE_GET_BTCHAR(pcibus_info->pbi_moduleid), + MODULE_GET_BPOS(pcibus_info->pbi_moduleid), + ((int)pcibus_info->pbi_buscommon.bs_persist_busnum) & 0xf, + device + 1); + + slot->hotplug_slot = bss_hotplug_slot; + list_add(&slot->hp_list, &sn_hp_list); + + return 0; +} + +static struct hotplug_slot * sn_hp_destroy(void) +{ + struct slot *slot; + struct list_head *list; + struct hotplug_slot *bss_hotplug_slot = NULL; + + list_for_each(list, &sn_hp_list) { + slot = list_entry(list, struct slot, hp_list); + bss_hotplug_slot = slot->hotplug_slot; + list_del(&((struct slot *)bss_hotplug_slot->private)-> + hp_list); + break; + } + return bss_hotplug_slot; +} + +static void sn_bus_alloc_data(struct pci_dev *dev) +{ + struct list_head *node; + struct pci_bus *subordinate_bus; + struct pci_dev *child; + + sn_pci_fixup_slot(dev); + + /* Recursively sets up the sn_irq_info structs */ + if (dev->subordinate) { + subordinate_bus = dev->subordinate; + list_for_each(node, &subordinate_bus->devices) { + child = list_entry(node, struct pci_dev, bus_list); + sn_bus_alloc_data(child); + } + } +} + +static void sn_bus_free_data(struct pci_dev *dev) +{ + struct list_head *node; + struct pci_bus *subordinate_bus; + struct pci_dev *child; + + /* Recursively clean up sn_irq_info structs */ + if (dev->subordinate) { + subordinate_bus = dev->subordinate; + list_for_each(node, &subordinate_bus->devices) { + child = list_entry(node, struct pci_dev, bus_list); + sn_bus_free_data(child); + } + } + sn_pci_unfixup_slot(dev); +} + +static u8 sn_power_status_get(struct hotplug_slot *bss_hotplug_slot) +{ + struct slot *slot = (struct slot *)bss_hotplug_slot->private; + struct pcibus_info *pcibus_info; + u8 retval; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); + retval = pcibus_info->pbi_enabled_devices & (1 << slot->device_num); + + return retval ? 1 : 0; +} + +static void sn_slot_mark_enable(struct hotplug_slot *bss_hotplug_slot, + int device_num) +{ + struct slot *slot = (struct slot *)bss_hotplug_slot->private; + struct pcibus_info *pcibus_info; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); + pcibus_info->pbi_enabled_devices |= (1 << device_num); +} + +static void sn_slot_mark_disable(struct hotplug_slot *bss_hotplug_slot, + int device_num) +{ + struct slot *slot = (struct slot *)bss_hotplug_slot->private; + struct pcibus_info *pcibus_info; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); + pcibus_info->pbi_enabled_devices &= ~(1 << device_num); +} + +static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot, + int device_num) +{ + struct slot *slot = (struct slot *)bss_hotplug_slot->private; + struct pcibus_info *pcibus_info; + struct pcibr_slot_enable_resp resp; + int rc; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); + + /* + * Power-on and initialize the slot in the SN + * PCI infrastructure. + */ + rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp); + + if (rc == PCI_SLOT_ALREADY_UP) { + dev_dbg(slot->pci_bus->self, "is already active\n"); + return -EPERM; + } + + if (rc == PCI_L1_ERR) { + dev_dbg(slot->pci_bus->self, + "L1 failure %d with message: %s", + resp.resp_sub_errno, resp.resp_l1_msg); + return -EPERM; + } + + if (rc) { + dev_dbg(slot->pci_bus->self, + "insert failed with error %d sub-error %d\n", + rc, resp.resp_sub_errno); + return -EIO; + } + + sn_slot_mark_enable(bss_hotplug_slot, device_num); + + return 0; +} + +static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot, + int device_num, int action) +{ + struct slot *slot = (struct slot *)bss_hotplug_slot->private; + struct pcibus_info *pcibus_info; + struct pcibr_slot_disable_resp resp; + int rc; + + pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus); + + rc = sal_pcibr_slot_disable(pcibus_info, device_num, action, &resp); + + if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_SLOT_ALREADY_DOWN) { + dev_dbg(slot->pci_bus->self, "Slot %s already inactive\n"); + return -ENODEV; + } + + if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_EMPTY_33MHZ) { + dev_dbg(slot->pci_bus->self, + "Cannot remove last 33MHz card\n"); + return -EPERM; + } + + if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_L1_ERR) { + dev_dbg(slot->pci_bus->self, + "L1 failure %d with message \n%s\n", + resp.resp_sub_errno, resp.resp_l1_msg); + return -EPERM; + } + + if (action == PCI_REQ_SLOT_ELIGIBLE && rc) { + dev_dbg(slot->pci_bus->self, + "remove failed with error %d sub-error %d\n", + rc, resp.resp_sub_errno); + return -EIO; + } + + if (action == PCI_REQ_SLOT_ELIGIBLE && !rc) + return 0; + + if (action == PCI_REQ_SLOT_DISABLE && !rc) { + sn_slot_mark_disable(bss_hotplug_slot, device_num); + dev_dbg(slot->pci_bus->self, "remove successful\n"); + return 0; + } + + if (action == PCI_REQ_SLOT_DISABLE && rc) { + dev_dbg(slot->pci_bus->self,"remove failed rc = %d\n", rc); + return rc; + } + + return rc; +} + +static int enable_slot(struct hotplug_slot *bss_hotplug_slot) +{ + struct slot *slot = (struct slot *)bss_hotplug_slot->private; + struct pci_bus *new_bus = NULL; + struct pci_dev *dev; + int func, num_funcs; + int new_ppb = 0; + int rc; + + /* Serialize the Linux PCI infrastructure */ + down(&sn_hotplug_sem); + + /* + * Power-on and initialize the slot in the SN + * PCI infrastructure. + */ + rc = sn_slot_enable(bss_hotplug_slot, slot->device_num); + if (rc) { + up(&sn_hotplug_sem); + return rc; + } + + num_funcs = pci_scan_slot(slot->pci_bus, PCI_DEVFN(slot->device_num+1, + PCI_FUNC(0))); + if (!num_funcs) { + dev_dbg(slot->pci_bus->self, "no device in slot\n"); + up(&sn_hotplug_sem); + return -ENODEV; + } + + sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus), + slot->pci_bus->number, + slot->pci_bus); + /* + * Map SN resources for all functions on the card + * to the Linux PCI interface and tell the drivers + * about them. + */ + for (func = 0; func < num_funcs; func++) { + dev = pci_get_slot(slot->pci_bus, + PCI_DEVFN(slot->device_num + 1, + PCI_FUNC(func))); + + + if (dev) { + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + unsigned char sec_bus; + pci_read_config_byte(dev, PCI_SECONDARY_BUS, + &sec_bus); + new_bus = pci_add_new_bus(dev->bus, dev, + sec_bus); + pci_scan_child_bus(new_bus); + sn_pci_controller_fixup(pci_domain_nr(new_bus), + new_bus->number, + new_bus); + new_ppb = 1; + } + sn_bus_alloc_data(dev); + pci_dev_put(dev); + } + } + + /* Call the driver for the new device */ + pci_bus_add_devices(slot->pci_bus); + /* Call the drivers for the new devices subordinate to PPB */ + if (new_ppb) + pci_bus_add_devices(new_bus); + + up(&sn_hotplug_sem); + + if (rc == 0) + dev_dbg(slot->pci_bus->self, + "insert operation successful\n"); + else + dev_dbg(slot->pci_bus->self, + "insert operation failed rc = %d\n", rc); + + return rc; +} + +static int disable_slot(struct hotplug_slot *bss_hotplug_slot) +{ + struct slot *slot = (struct slot *)bss_hotplug_slot->private; + struct pci_dev *dev; + int func; + int rc; + + /* Acquire update access to the bus */ + down(&sn_hotplug_sem); + + /* is it okay to bring this slot down? */ + rc = sn_slot_disable(bss_hotplug_slot, slot->device_num, + PCI_REQ_SLOT_ELIGIBLE); + if (rc) + goto leaving; + + /* Free the SN resources assigned to the Linux device.*/ + for (func = 0; func < 8; func++) { + dev = pci_get_slot(slot->pci_bus, + PCI_DEVFN(slot->device_num+1, + PCI_FUNC(func))); + if (dev) { + /* + * Some drivers may use dma accesses during the + * driver remove function. We release the sysdata + * areas after the driver remove functions have + * been called. + */ + sn_bus_store_sysdata(dev); + sn_bus_free_data(dev); + pci_remove_bus_device(dev); + pci_dev_put(dev); + } + } + + /* free the collected sysdata pointers */ + sn_bus_free_sysdata(); + + /* Deactivate slot */ + rc = sn_slot_disable(bss_hotplug_slot, slot->device_num, + PCI_REQ_SLOT_DISABLE); + leaving: + /* Release the bus lock */ + up(&sn_hotplug_sem); + + return rc; +} + +static int get_power_status(struct hotplug_slot *bss_hotplug_slot, u8 *value) +{ + down(&sn_hotplug_sem); + *value = sn_power_status_get(bss_hotplug_slot); + up(&sn_hotplug_sem); + return 0; +} + +static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot) +{ + kfree(bss_hotplug_slot->info); + kfree(bss_hotplug_slot->name); + kfree(bss_hotplug_slot->private); + kfree(bss_hotplug_slot); +} + +static int sn_hotplug_slot_register(struct pci_bus *pci_bus) +{ + int device; + struct hotplug_slot *bss_hotplug_slot; + int rc = 0; + + /* + * Currently only four devices are supported, + * in the future there maybe more -- up to 32. + */ + + for (device = 0; device < SN_MAX_HP_SLOTS ; device++) { + if (sn_pci_slot_valid(pci_bus, device) != 1) + continue; + + bss_hotplug_slot = kcalloc(1,sizeof(struct hotplug_slot), + GFP_KERNEL); + if (!bss_hotplug_slot) { + rc = -ENOMEM; + goto alloc_err; + } + + bss_hotplug_slot->info = + kcalloc(1,sizeof(struct hotplug_slot_info), + GFP_KERNEL); + if (!bss_hotplug_slot->info) { + rc = -ENOMEM; + goto alloc_err; + } + + if (sn_hp_slot_private_alloc(bss_hotplug_slot, + pci_bus, device)) { + rc = -ENOMEM; + goto alloc_err; + } + + bss_hotplug_slot->ops = &sn_hotplug_slot_ops; + bss_hotplug_slot->release = &sn_release_slot; + + rc = pci_hp_register(bss_hotplug_slot); + if (rc) + goto register_err; + } + dev_dbg(pci_bus->self, "Registered bus with hotplug\n"); + return rc; + +register_err: + dev_dbg(pci_bus->self, "bus failed to register with err = %d\n", + rc); + +alloc_err: + if (rc == -ENOMEM) + dev_dbg(pci_bus->self, "Memory allocation error\n"); + + /* destroy THIS element */ + if (bss_hotplug_slot) + sn_release_slot(bss_hotplug_slot); + + /* destroy anything else on the list */ + while ((bss_hotplug_slot = sn_hp_destroy())) + pci_hp_deregister(bss_hotplug_slot); + + return rc; +} + +static int sn_pci_hotplug_init(void) +{ + struct pci_bus *pci_bus = NULL; + int rc; + int registered = 0; + + INIT_LIST_HEAD(&sn_hp_list); + + if (sn_sal_rev() < SGI_HOTPLUG_PROM_REV) { + printk(KERN_ERR "%s: PROM version must be greater than 4.05\n", + __FUNCTION__); + return -EPERM; + } + + while ((pci_bus = pci_find_next_bus(pci_bus))) { + if (!pci_bus->sysdata) + continue; + + rc = sn_pci_bus_valid(pci_bus); + if (rc != 1) { + dev_dbg(pci_bus->self, "not a valid hotplug bus\n"); + continue; + } + dev_dbg(pci_bus->self, "valid hotplug bus\n"); + + rc = sn_hotplug_slot_register(pci_bus); + if (!rc) + registered = 1; + else { + registered = 0; + break; + } + } + + return registered == 1 ? 0 : -ENODEV; +} + +static void sn_pci_hotplug_exit(void) +{ + struct hotplug_slot *bss_hotplug_slot; + + while ((bss_hotplug_slot = sn_hp_destroy())) { + pci_hp_deregister(bss_hotplug_slot); + } + + if (!list_empty(&sn_hp_list)) + printk(KERN_ERR "%s: internal list is not empty\n", __FILE__); +} + +module_init(sn_pci_hotplug_init); +module_exit(sn_pci_hotplug_exit); -- cgit v1.2.3