From b69f4abc125f6f4eada8423b5d8637c7550f90a0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 27 Oct 2018 20:31:19 +0200 Subject: PCI: histb: Constify dw_pcie_host_ops structure The dw_pcie_host_ops structure is only stored in the ops field of a pcie_port structure, and this field is const, so make the dw_pcie_host_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Lorenzo Pieralisi Acked-by: Shawn Guo --- drivers/pci/controller/dwc/pcie-histb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci/controller/dwc') diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c index 7b32e619b959..954bc2b74bbc 100644 --- a/drivers/pci/controller/dwc/pcie-histb.c +++ b/drivers/pci/controller/dwc/pcie-histb.c @@ -202,7 +202,7 @@ static int histb_pcie_host_init(struct pcie_port *pp) return 0; } -static struct dw_pcie_host_ops histb_pcie_host_ops = { +static const struct dw_pcie_host_ops histb_pcie_host_ops = { .rd_own_conf = histb_pcie_rd_own_conf, .wr_own_conf = histb_pcie_wr_own_conf, .host_init = histb_pcie_host_init, -- cgit v1.2.3 From 3f7cceeab895fcc17ac8db0d9a5e8ca2954b4661 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Mon, 8 Oct 2018 18:06:21 +0000 Subject: PCI: imx: Add multi-pd support On some chips the PCIe and PCIE_PHY blocks are in separate power domains which can be power-gated independently. The PCI driver needs to handle this by keeping both domain active. This is intended for imx6sx where PCIe is in DISPLAY and PCIE_PHY in its own domain. Defining the DISPLAY domain requires a way for PCIe to keep it active or it will break when displays are off. The power-domains on imx6sx are meant to look like this: power-domains = <&pd_disp>, <&pd_pci>; power-domain-names = "pcie", "pcie_phy"; Signed-off-by: Leonard Crestez [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Reviewed-by: Ulf Hansson --- drivers/pci/controller/dwc/pci-imx6.c | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'drivers/pci/controller/dwc') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 2cbef2d7c207..4a307cdf20c8 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include "pcie-designware.h" @@ -59,6 +61,11 @@ struct imx6_pcie { u32 tx_swing_low; int link_gen; struct regulator *vpcie; + + /* power domain for pcie */ + struct device *pd_pcie; + /* power domain for pcie phy */ + struct device *pd_pcie_phy; }; /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */ @@ -292,6 +299,43 @@ static int imx6q_pcie_abort_handler(unsigned long addr, return 1; } +static int imx6_pcie_attach_pd(struct device *dev) +{ + struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); + struct device_link *link; + + /* Do nothing when in a single power domain */ + if (dev->pm_domain) + return 0; + + imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie"); + if (IS_ERR(imx6_pcie->pd_pcie)) + return PTR_ERR(imx6_pcie->pd_pcie); + link = device_link_add(dev, imx6_pcie->pd_pcie, + DL_FLAG_STATELESS | + DL_FLAG_PM_RUNTIME | + DL_FLAG_RPM_ACTIVE); + if (!link) { + dev_err(dev, "Failed to add device_link to pcie pd.\n"); + return -EINVAL; + } + + imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy"); + if (IS_ERR(imx6_pcie->pd_pcie_phy)) + return PTR_ERR(imx6_pcie->pd_pcie_phy); + + device_link_add(dev, imx6_pcie->pd_pcie_phy, + DL_FLAG_STATELESS | + DL_FLAG_PM_RUNTIME | + DL_FLAG_RPM_ACTIVE); + if (IS_ERR(link)) { + dev_err(dev, "Failed to add device_link to pcie_phy pd: %ld\n", PTR_ERR(link)); + return PTR_ERR(link); + } + + return 0; +} + static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) { struct device *dev = imx6_pcie->pci->dev; @@ -985,6 +1029,10 @@ static int imx6_pcie_probe(struct platform_device *pdev) platform_set_drvdata(pdev, imx6_pcie); + ret = imx6_pcie_attach_pd(dev); + if (ret) + return ret; + ret = imx6_add_pcie_port(imx6_pcie, pdev); if (ret < 0) return ret; -- cgit v1.2.3 From edfd39f0a417111365442f07c04150d2950f3a25 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 19 Nov 2018 11:00:22 +0100 Subject: PCI: dwc: layerscape: Constify driver data Constify driver data since they do not get changed at runtime. Signed-off-by: Stefan Agner Signed-off-by: Lorenzo Pieralisi --- drivers/pci/controller/dwc/pci-layerscape.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/pci/controller/dwc') diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c index 3724d3ef7008..905a0ab0e6fa 100644 --- a/drivers/pci/controller/dwc/pci-layerscape.c +++ b/drivers/pci/controller/dwc/pci-layerscape.c @@ -222,12 +222,12 @@ static const struct dw_pcie_ops dw_ls_pcie_ops = { .link_up = ls_pcie_link_up, }; -static struct ls_pcie_drvdata ls1021_drvdata = { +static const struct ls_pcie_drvdata ls1021_drvdata = { .ops = &ls1021_pcie_host_ops, .dw_pcie_ops = &dw_ls1021_pcie_ops, }; -static struct ls_pcie_drvdata ls1043_drvdata = { +static const struct ls_pcie_drvdata ls1043_drvdata = { .lut_offset = 0x10000, .ltssm_shift = 24, .lut_dbg = 0x7fc, @@ -235,7 +235,7 @@ static struct ls_pcie_drvdata ls1043_drvdata = { .dw_pcie_ops = &dw_ls_pcie_ops, }; -static struct ls_pcie_drvdata ls1046_drvdata = { +static const struct ls_pcie_drvdata ls1046_drvdata = { .lut_offset = 0x80000, .ltssm_shift = 24, .lut_dbg = 0x407fc, @@ -243,7 +243,7 @@ static struct ls_pcie_drvdata ls1046_drvdata = { .dw_pcie_ops = &dw_ls_pcie_ops, }; -static struct ls_pcie_drvdata ls2080_drvdata = { +static const struct ls_pcie_drvdata ls2080_drvdata = { .lut_offset = 0x80000, .ltssm_shift = 0, .lut_dbg = 0x7fc, @@ -251,7 +251,7 @@ static struct ls_pcie_drvdata ls2080_drvdata = { .dw_pcie_ops = &dw_ls_pcie_ops, }; -static struct ls_pcie_drvdata ls2088_drvdata = { +static const struct ls_pcie_drvdata ls2088_drvdata = { .lut_offset = 0x80000, .ltssm_shift = 0, .lut_dbg = 0x407fc, -- cgit v1.2.3 From a3ed1446520ef68466ba75b774152d789710ea95 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Fri, 16 Nov 2018 00:08:33 +0000 Subject: PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 The IMX6 PCI-e host driver also supports the IMX7d. However, the Kconfig dependencies of the driver prevented it from being enabled unless the kernel was built with both IMX6 and IMX7 support. It works fine to build with only IMX7 support enabled therefore adjust the Kconfig entry to allow this configuration. Signed-off-by: Trent Piepho Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach Cc: Andrey Smirnov --- drivers/pci/controller/dwc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pci/controller/dwc') diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 91b0194240a5..6aafec3fad00 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -89,8 +89,8 @@ config PCI_EXYNOS select PCIE_DW_HOST config PCI_IMX6 - bool "Freescale i.MX6 PCIe controller" - depends on SOC_IMX6Q || (ARM && COMPILE_TEST) + bool "Freescale i.MX6/7 PCIe controller" + depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST -- cgit v1.2.3 From 3d71746c420c1c1c27cf5c4e48f8fa0a6cfdc185 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 3 Oct 2018 15:49:43 +0300 Subject: PCI: armada8k: Add support for gpio controlled reset signal Add support for the gpio reset signal binding as described in the designware-pcie.txt DT binding document. Both the documented 'reset-gpio' property name and the more standard 'reset-gpios' name are supported. Signed-off-by: Baruch Siach Signed-off-by: Lorenzo Pieralisi Acked-by: Thomas Petazzoni --- drivers/pci/controller/dwc/pcie-armada8k.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/pci/controller/dwc') diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c index 0c389a30ef5d..b171b6bc15c8 100644 --- a/drivers/pci/controller/dwc/pcie-armada8k.c +++ b/drivers/pci/controller/dwc/pcie-armada8k.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "pcie-designware.h" @@ -29,6 +30,7 @@ struct armada8k_pcie { struct dw_pcie *pci; struct clk *clk; struct clk *clk_reg; + struct gpio_desc *reset_gpio; }; #define PCIE_VENDOR_REGS_OFFSET 0x8000 @@ -137,6 +139,12 @@ static int armada8k_pcie_host_init(struct pcie_port *pp) struct dw_pcie *pci = to_dw_pcie_from_pp(pp); struct armada8k_pcie *pcie = to_armada8k_pcie(pci); + if (pcie->reset_gpio) { + /* assert and then deassert the reset signal */ + gpiod_set_value_cansleep(pcie->reset_gpio, 1); + msleep(100); + gpiod_set_value_cansleep(pcie->reset_gpio, 0); + } dw_pcie_setup_rc(pp); armada8k_pcie_establish_link(pcie); @@ -249,6 +257,14 @@ static int armada8k_pcie_probe(struct platform_device *pdev) goto fail_clkreg; } + /* Get reset gpio signal and hold asserted (logically high) */ + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(pcie->reset_gpio)) { + ret = PTR_ERR(pcie->reset_gpio); + goto fail_clkreg; + } + platform_set_drvdata(pdev, pcie); ret = armada8k_add_pcie_port(pcie, pdev); -- cgit v1.2.3 From 9e56f0df3684bd752347e7c3df5e8ed1fc55d139 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Wed, 7 Nov 2018 13:57:03 +0000 Subject: PCI: imx: Add imx6sx suspend/resume support Enable PCI suspend/resume support on imx6sx SOCs. This is similar to imx7d with a few differences: * The PM_Turn_Off bit is exposed through an IOMUX GPR, like all other pcie control bits on 6sx. * The pcie_inbound_axi clk needs to be turned off in suspend. On resume it is restored via resume -> deassert_core_reset -> enable_ref_clk. Most of the resume logic is shared with the initial reset after probe. Signed-off-by: Leonard Crestez Signed-off-by: Lorenzo Pieralisi Reviewed-by: Andrey Smirnov Acked-by: Lucas Stach --- drivers/pci/controller/dwc/pci-imx6.c | 44 +++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 5 deletions(-) (limited to 'drivers/pci/controller/dwc') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 4a307cdf20c8..25a2b7683e55 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -817,8 +817,28 @@ static void imx6_pcie_ltssm_disable(struct device *dev) static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie) { - reset_control_assert(imx6_pcie->turnoff_reset); - reset_control_deassert(imx6_pcie->turnoff_reset); + struct device *dev = imx6_pcie->pci->dev; + + /* Some variants have a turnoff reset in DT */ + if (imx6_pcie->turnoff_reset) { + reset_control_assert(imx6_pcie->turnoff_reset); + reset_control_deassert(imx6_pcie->turnoff_reset); + goto pm_turnoff_sleep; + } + + /* Others poke directly at IOMUXC registers */ + switch (imx6_pcie->variant) { + case IMX6SX: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_PM_TURN_OFF, + IMX6SX_GPR12_PCIE_PM_TURN_OFF); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0); + break; + default: + dev_err(dev, "PME_Turn_Off not implemented\n"); + return; + } /* * Components with an upstream port must respond to @@ -827,6 +847,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie) * The standard recommends a 1-10ms timeout after which to * proceed anyway as if acks were received. */ +pm_turnoff_sleep: usleep_range(1000, 10000); } @@ -836,18 +857,31 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) clk_disable_unprepare(imx6_pcie->pcie_phy); clk_disable_unprepare(imx6_pcie->pcie_bus); - if (imx6_pcie->variant == IMX7D) { + switch (imx6_pcie->variant) { + case IMX6SX: + clk_disable_unprepare(imx6_pcie->pcie_inbound_axi); + break; + case IMX7D: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL); + break; + default: + break; } } +static inline bool imx6_pcie_supports_suspend(struct imx6_pcie *imx6_pcie) +{ + return (imx6_pcie->variant == IMX7D || + imx6_pcie->variant == IMX6SX); +} + static int imx6_pcie_suspend_noirq(struct device *dev) { struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); - if (imx6_pcie->variant != IMX7D) + if (!imx6_pcie_supports_suspend(imx6_pcie)) return 0; imx6_pcie_pm_turnoff(imx6_pcie); @@ -863,7 +897,7 @@ static int imx6_pcie_resume_noirq(struct device *dev) struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); struct pcie_port *pp = &imx6_pcie->pci->pp; - if (imx6_pcie->variant != IMX7D) + if (!imx6_pcie_supports_suspend(imx6_pcie)) return 0; imx6_pcie_assert_core_reset(imx6_pcie); -- cgit v1.2.3 From 6d6b05e3d5337f645a411cdf72f1a083e495acb8 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 30 Nov 2018 11:37:19 -0700 Subject: PCI: dwc: Don't hard-code DBI/ATU offset The DWC PCIe core contains various separate register spaces: DBI, DBI2, ATU, DMA, etc. The relationship between the addresses of these register spaces is entirely determined by the implementation of the IP block, not by the IP block design itself. Hence, the DWC driver must not make assumptions that one register space can be accessed at a fixed offset from any other register space. To avoid such assumptions, introduce an explicit/separate register pointer for the ATU register space. In particular, the current assumption is not valid for NVIDIA's T194 SoC. The ATU register space is only used on systems that require unrolled ATU access. This property is detected at run-time for host controllers, and when this is detected, this patch provides a default value for atu_base that matches the previous assumption re: register layout. An alternative would be to update all drivers for HW that requires unrolled access to explicitly set atu_base. However, it's hard to tell which drivers would require atu_base to be set. The unrolled property is not detected for endpoint systems, and so any endpoint driver that requires unrolled access must explicitly set the iatu_unroll_enabled flag (none do at present), and so a check is added to require the driver to also set atu_base while at it. Signed-off-by: Stephen Warren Signed-off-by: Lorenzo Pieralisi Acked-by: Gustavo Pimentel Acked-by: Vidya Sagar --- drivers/pci/controller/dwc/pcie-designware-ep.c | 4 ++++ drivers/pci/controller/dwc/pcie-designware-host.c | 3 +++ drivers/pci/controller/dwc/pcie-designware.c | 8 +++---- drivers/pci/controller/dwc/pcie-designware.h | 28 +++++++++++++++++++---- 4 files changed, 35 insertions(+), 8 deletions(-) (limited to 'drivers/pci/controller/dwc') diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 1e7b02221eac..880210366e71 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -504,6 +504,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) dev_err(dev, "dbi_base/dbi_base2 is not populated\n"); return -EINVAL; } + if (pci->iatu_unroll_enabled && !pci->atu_base) { + dev_err(dev, "atu_base is not populated\n"); + return -EINVAL; + } ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows); if (ret < 0) { diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 29a05759a294..692dd1b264fb 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -699,6 +699,9 @@ void dw_pcie_setup_rc(struct pcie_port *pp) dev_dbg(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ? "enabled" : "disabled"); + if (pci->iatu_unroll_enabled && !pci->atu_base) + pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET; + dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0, PCIE_ATU_TYPE_MEM, pp->mem_base, pp->mem_bus_addr, pp->mem_size); diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 2153956a0b20..93ef8c31fb39 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -93,7 +93,7 @@ static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg) { u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); - return dw_pcie_readl_dbi(pci, offset + reg); + return dw_pcie_readl_atu(pci, offset + reg); } static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg, @@ -101,7 +101,7 @@ static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg, { u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); - dw_pcie_writel_dbi(pci, offset + reg, val); + dw_pcie_writel_atu(pci, offset + reg, val); } static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, @@ -187,7 +187,7 @@ static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg) { u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index); - return dw_pcie_readl_dbi(pci, offset + reg); + return dw_pcie_readl_atu(pci, offset + reg); } static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg, @@ -195,7 +195,7 @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg, { u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index); - dw_pcie_writel_dbi(pci, offset + reg, val); + dw_pcie_writel_atu(pci, offset + reg, val); } static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 0989d880ac46..9943d8c68335 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -92,12 +92,20 @@ #define PCIE_ATU_UNR_LOWER_TARGET 0x14 #define PCIE_ATU_UNR_UPPER_TARGET 0x18 +/* + * The default address offset between dbi_base and atu_base. Root controller + * drivers are not required to initialize atu_base if the offset matches this + * default; the driver core automatically derives atu_base from dbi_base using + * this offset, if atu_base not set. + */ +#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20) + /* Register address builder */ -#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \ - ((0x3 << 20) | ((region) << 9)) +#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \ + ((region) << 9) -#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \ - ((0x3 << 20) | ((region) << 9) | (0x1 << 8)) +#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \ + (((region) << 9) | (0x1 << 8)) #define MAX_MSI_IRQS 256 #define MAX_MSI_IRQS_PER_CTRL 32 @@ -219,6 +227,8 @@ struct dw_pcie { struct device *dev; void __iomem *dbi_base; void __iomem *dbi_base2; + /* Used when iatu_unroll_enabled is true */ + void __iomem *atu_base; u32 num_viewport; u8 iatu_unroll_enabled; struct pcie_port pp; @@ -289,6 +299,16 @@ static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg) return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4); } +static inline void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val) +{ + __dw_pcie_write_dbi(pci, pci->atu_base, reg, 0x4, val); +} + +static inline u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg) +{ + return __dw_pcie_read_dbi(pci, pci->atu_base, reg, 0x4); +} + static inline void dw_pcie_dbi_ro_wr_en(struct dw_pcie *pci) { u32 reg; -- cgit v1.2.3