From 340f42f7ff0b87a92e69b50706a6c872da756c89 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Wed, 19 May 2021 11:16:13 +0200 Subject: nfc: s3fwrn5: i2c: Enable optional clock from device tree S3FWRN5 depends on a clock input ("XI" pin) to function properly. Depending on the hardware configuration this could be an always-on oscillator or some external clock that must be explicitly enabled. So far we assumed that the clock is always-on. Make the driver request an (optional) clock from the device tree and make sure the clock is running before starting S3FWRN5. Note: S3FWRN5 asserts "GPIO2" whenever it needs the clock input to function correctly. On some hardware configurations, GPIO2 is connected directly to an input pin of the external clock provider (e.g. the main PMIC of the SoC). In that case, it can automatically AND the clock enable bit and clock request from S3FWRN5 so that the clock is actually only enabled when needed. It is also conceivable that on some other hardware configuration S3FWRN5's GPIO2 might be connected as a regular GPIO input of the SoC. In that case, follow-up patches could extend the driver to request the GPIO, set up an interrupt and only enable the clock when requested by S3FWRN5. Signed-off-by: Stephan Gerhold Reviewed-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- drivers/nfc/s3fwrn5/i2c.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) (limited to 'drivers/nfc') diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c index 897394167522..38b8d6cab593 100644 --- a/drivers/nfc/s3fwrn5/i2c.c +++ b/drivers/nfc/s3fwrn5/i2c.c @@ -6,6 +6,7 @@ * Robert Baldyga */ +#include #include #include #include @@ -22,6 +23,7 @@ struct s3fwrn5_i2c_phy { struct phy_common common; struct i2c_client *i2c_dev; + struct clk *clk; unsigned int irq_skip:1; }; @@ -207,17 +209,40 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client, if (ret < 0) return ret; + phy->clk = devm_clk_get_optional(&client->dev, NULL); + if (IS_ERR(phy->clk)) + return dev_err_probe(&client->dev, PTR_ERR(phy->clk), + "failed to get clock\n"); + + /* + * S3FWRN5 depends on a clock input ("XI" pin) to function properly. + * Depending on the hardware configuration this could be an always-on + * oscillator or some external clock that must be explicitly enabled. + * Make sure the clock is running before starting S3FWRN5. + */ + ret = clk_prepare_enable(phy->clk); + if (ret < 0) { + dev_err(&client->dev, "failed to enable clock: %d\n", ret); + return ret; + } + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops); if (ret < 0) - return ret; + goto disable_clk; ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL, s3fwrn5_i2c_irq_thread_fn, IRQF_ONESHOT, S3FWRN5_I2C_DRIVER_NAME, phy); if (ret) - s3fwrn5_remove(phy->common.ndev); + goto s3fwrn5_remove; + return 0; + +s3fwrn5_remove: + s3fwrn5_remove(phy->common.ndev); +disable_clk: + clk_disable_unprepare(phy->clk); return ret; } @@ -226,6 +251,7 @@ static int s3fwrn5_i2c_remove(struct i2c_client *client) struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); s3fwrn5_remove(phy->common.ndev); + clk_disable_unprepare(phy->clk); return 0; } -- cgit v1.2.3