From e11f303e3d0731a7379252192e7d02a1ae319238 Mon Sep 17 00:00:00 2001 From: Steve Shih Date: Tue, 5 Apr 2016 11:30:03 -0700 Subject: e1000e: fix ethtool autoneg off for non-copper This patch fixes the issues for disabling auto-negotiation and forcing speed and duplex settings for the non-copper media. For non-copper media, e1000_get_settings should return ETH_TP_MDI_INVALID for eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings call would not fail with -EOPNOTSUPP. e1000_set_spd_dplx should not automatically turn autoneg back on for forced 1000 Mbps full duplex settings for non-copper media. Cc: xe-kernel@external.cisco.com Cc: Daniel Walker Signed-off-by: Steve Shih Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ethtool.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 1e3973aa707c..83a815b501ed 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -201,6 +201,9 @@ static int e1000_get_settings(struct net_device *netdev, else ecmd->eth_tp_mdix_ctrl = hw->phy.mdix; + if (hw->phy.media_type != e1000_media_type_copper) + ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID; + return 0; } @@ -236,8 +239,13 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) mac->forced_speed_duplex = ADVERTISE_100_FULL; break; case SPEED_1000 + DUPLEX_FULL: - mac->autoneg = 1; - adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; + if (adapter->hw.phy.media_type == e1000_media_type_copper) { + mac->autoneg = 1; + adapter->hw.phy.autoneg_advertised = + ADVERTISE_1000_FULL; + } else { + mac->forced_speed_duplex = ADVERTISE_1000_FULL; + } break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: -- cgit v1.2.3