From 205e2210daa975d92ace485a65a31ccc4077fe1a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 12 Feb 2014 15:15:05 +0200 Subject: iwlwifi: disable TX AMPDU by default for iwldvm NICs supported by iwldvm don't handle well TX AMPDU. Disable it by default, still leave the possibility to the user to force enable it with a debug parameter. NICs supported by iwlmvm don't suffer from the same issue, leave TX AMPDU enabled by default for these. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 22 ++++++++++++++++++++-- drivers/net/wireless/iwlwifi/iwl-drv.c | 2 +- drivers/net/wireless/iwlwifi/iwl-modparams.h | 11 +++++++---- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 22 ++++++++++++++++++++-- 4 files changed, 48 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index c24d1d3d55f6..73086c1629ca 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -696,6 +696,24 @@ static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, return ret; } +static inline bool iwl_enable_rx_ampdu(const struct iwl_cfg *cfg) +{ + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) + return false; + return true; +} + +static inline bool iwl_enable_tx_ampdu(const struct iwl_cfg *cfg) +{ + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) + return false; + if (iwlwifi_mod_params.disable_11n & IWL_ENABLE_HT_TXAGG) + return true; + + /* disabled by default */ + return false; +} + static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum ieee80211_ampdu_mlme_action action, @@ -717,7 +735,7 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, switch (action) { case IEEE80211_AMPDU_RX_START: - if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) + if (!iwl_enable_rx_ampdu(priv->cfg)) break; IWL_DEBUG_HT(priv, "start Rx\n"); ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn); @@ -729,7 +747,7 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_TX_START: if (!priv->trans->ops->txq_enable) break; - if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) + if (!iwl_enable_tx_ampdu(priv->cfg)) break; IWL_DEBUG_HT(priv, "start Tx\n"); ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index c3728163be46..75103554cd63 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1286,7 +1286,7 @@ module_param_named(swcrypto, iwlwifi_mod_params.sw_crypto, int, S_IRUGO); MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); module_param_named(11n_disable, iwlwifi_mod_params.disable_11n, uint, S_IRUGO); MODULE_PARM_DESC(11n_disable, - "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX"); + "disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX"); module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K, int, S_IRUGO); MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)"); diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h index 0a84ade7edac..b29075c3da8e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-modparams.h +++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h @@ -79,9 +79,12 @@ enum iwl_power_level { IWL_POWER_NUM }; -#define IWL_DISABLE_HT_ALL BIT(0) -#define IWL_DISABLE_HT_TXAGG BIT(1) -#define IWL_DISABLE_HT_RXAGG BIT(2) +enum iwl_disable_11n { + IWL_DISABLE_HT_ALL = BIT(0), + IWL_DISABLE_HT_TXAGG = BIT(1), + IWL_DISABLE_HT_RXAGG = BIT(2), + IWL_ENABLE_HT_TXAGG = BIT(3), +}; /** * struct iwl_mod_params @@ -90,7 +93,7 @@ enum iwl_power_level { * * @sw_crypto: using hardware encryption, default = 0 * @disable_11n: disable 11n capabilities, default = 0, - * use IWL_DISABLE_HT_* constants + * use IWL_[DIS,EN]ABLE_HT_* constants * @amsdu_size_8K: enable 8K amsdu size, default = 0 * @restart_fw: restart firmware, default = 1 * @wd_disable: enable stuck queue check, default = 0 diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 6bf9766e5982..c35b8661b395 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -328,6 +328,24 @@ static void iwl_mvm_mac_tx(struct ieee80211_hw *hw, ieee80211_free_txskb(hw, skb); } +static inline bool iwl_enable_rx_ampdu(const struct iwl_cfg *cfg) +{ + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) + return false; + return true; +} + +static inline bool iwl_enable_tx_ampdu(const struct iwl_cfg *cfg) +{ + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) + return false; + if (iwlwifi_mod_params.disable_11n & IWL_ENABLE_HT_TXAGG) + return true; + + /* enabled by default */ + return true; +} + static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum ieee80211_ampdu_mlme_action action, @@ -347,7 +365,7 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw, switch (action) { case IEEE80211_AMPDU_RX_START: - if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) { + if (!iwl_enable_rx_ampdu(mvm->cfg)) { ret = -EINVAL; break; } @@ -357,7 +375,7 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw, ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, 0, false); break; case IEEE80211_AMPDU_TX_START: - if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) { + if (!iwl_enable_tx_ampdu(mvm->cfg)) { ret = -EINVAL; break; } -- cgit v1.2.3 From f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 Mon Sep 17 00:00:00 2001 From: Olivier Langlois Date: Sat, 1 Feb 2014 01:11:09 -0500 Subject: rtlwifi: rtl8192ce: Fix too long disable of IRQs rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans The observable symptoms in dmesg can be: - underruns from ALSA playback - clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled): [ 250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100 [ 250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable [ 250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32) [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0 [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc [ 250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!! [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <=== [ 250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1 [ 250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore [ 251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505) The exact code flow that causes that is: 1. wpa_supplicant send a start_scan request to the nl80211 driver 2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE 3. rtl_ips_nic_on is called which disable local irqs 4. rtl92c_phy_set_rf_power_state() is called 5. rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled but a quick and dirty solution that has proven to work is to reenable the irqs during the function rtl92ce_hw_init(). I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed. Signed-off-by: Olivier Langlois Cc: Stable Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index a82b30a1996c..2eb0b38384dd 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -937,14 +937,26 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw) bool is92c; int err; u8 tmp_u1b; + unsigned long flags; rtlpci->being_init_adapter = true; + + /* Since this function can take a very long time (up to 350 ms) + * and can be called with irqs disabled, reenable the irqs + * to let the other devices continue being serviced. + * + * It is safe doing so since our own interrupts will only be enabled + * in a subsequent step. + */ + local_save_flags(flags); + local_irq_enable(); + rtlpriv->intf_ops->disable_aspm(hw); rtstatus = _rtl92ce_init_mac(hw); if (!rtstatus) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n"); err = 1; - return err; + goto exit; } err = rtl92c_download_fw(hw); @@ -952,7 +964,7 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw) RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, "Failed to download FW. Init HW without FW now..\n"); err = 1; - return err; + goto exit; } rtlhal->last_hmeboxnum = 0; @@ -1032,6 +1044,8 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw) RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "under 1.5V\n"); } rtl92c_dm_init(hw); +exit: + local_irq_restore(flags); rtlpci->being_init_adapter = false; return err; } -- cgit v1.2.3 From 2e8c5e56b307271c2dab6f8bfd1d8a3822ca2390 Mon Sep 17 00:00:00 2001 From: Olivier Langlois Date: Sat, 1 Feb 2014 01:11:10 -0500 Subject: rtlwifi: Fix incorrect return from rtl_ps_enable_nic() rtl_ps_enable_nic() is called from loops that will loop until this function returns true or a maximum number of retries is performed. hw_init() returns non-zero on error. In that situation return false to restore the original design intent to retry hw init when it fails. Signed-off-by: Olivier Langlois Cc: Stable Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/ps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c index deedae3c5449..d1c0191a195b 100644 --- a/drivers/net/wireless/rtlwifi/ps.c +++ b/drivers/net/wireless/rtlwifi/ps.c @@ -48,7 +48,7 @@ bool rtl_ps_enable_nic(struct ieee80211_hw *hw) /*<2> Enable Adapter */ if (rtlpriv->cfg->ops->hw_init(hw)) - return 1; + return false; RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); /*<3> Enable Interrupt */ -- cgit v1.2.3 From 4a0732d1f93ff52b0e74a61302260b9417f6db61 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 7 Feb 2014 14:50:38 +0300 Subject: ath5k: shifting the wrong variable for AR5K_AR5210 In the original code we shift "AR5K_PHY(256) >> 28" which is zero but the intent was to shift the return value of ath5k_hw_reg_read() like we do a couple lines later. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index d6bc7cb61bfb..1a2973b7acf2 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -110,7 +110,7 @@ ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); if (ah->ah_version == AR5K_AR5210) { - srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(256)) >> 28) & 0xf; ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; } else { srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; -- cgit v1.2.3 From b6213e413a4e0c66548153516b074df14f9d08e0 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 10 Feb 2014 22:38:28 +0100 Subject: rtl8187: fix regression on MIPS without coherent DMA This patch fixes regression caused by commit a16dad77634 "MIPS: Fix potencial corruption". That commit fixes one corruption scenario in cost of adding another one, which actually start to cause crashes on Yeeloong laptop when rtl8187 driver is used. For correct DMA read operation on machines without DMA coherence, kernel have to invalidate cache, such it will refill later with new data that device wrote to memory, when that data is needed to process. We can only invalidate full cache line. Hence when cache line includes both dma buffer and some other data (written in cache, but not yet in main memory), the other data can not hit memory due to invalidation. That happen on rtl8187 where struct rtl8187_priv fields are located just before and after small buffers that are passed to USB layer and DMA is performed on them. To fix the problem we align buffers and reserve space after them to make them match cache line. This patch does not resolve all possible MIPS problems entirely, for that we have to assure that we always map cache aligned buffers for DMA, what can be complex or even not possible. But patch fixes visible and reproducible regression and seems other possible corruptions do not happen in practice, since Yeeloong laptop works stable without rtl8187 driver. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=54391 Reported-by: Petr Pisar Bisected-by: Tom Li Reported-and-tested-by: Tom Li Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Larry Finger Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187/rtl8187.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h index 56aee067f324..a6ad79f61bf9 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h @@ -15,6 +15,8 @@ #ifndef RTL8187_H #define RTL8187_H +#include + #include "rtl818x.h" #include "leds.h" @@ -139,7 +141,10 @@ struct rtl8187_priv { u8 aifsn[4]; u8 rfkill_mask; struct { - __le64 buf; + union { + __le64 buf; + u8 dummy1[L1_CACHE_BYTES]; + } ____cacheline_aligned; struct sk_buff_head queue; } b_tx_status; /* This queue is used by both -b and non-b devices */ struct mutex io_mutex; @@ -147,7 +152,8 @@ struct rtl8187_priv { u8 bits8; __le16 bits16; __le32 bits32; - } *io_dmabuf; + u8 dummy2[L1_CACHE_BYTES]; + } *io_dmabuf ____cacheline_aligned; bool rfkill_off; u16 seqno; }; -- cgit v1.2.3 From 4885c8731a34eecf509822e089ce17bcd9bd4650 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Wed, 12 Feb 2014 22:38:17 +0000 Subject: hostap: fix "hostap: proc: Use remove_proc_subtree()" remove_proc_subtree() doesn't work here as local->ddev has already been removed, and NULLed out. Use proc_remove() instead. Signed-off-by: Russell King Tested-by: Russell King Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/hostap/hostap_proc.c b/drivers/net/wireless/hostap/hostap_proc.c index aa7ad3a7a69b..4e5c0f8c9496 100644 --- a/drivers/net/wireless/hostap/hostap_proc.c +++ b/drivers/net/wireless/hostap/hostap_proc.c @@ -496,7 +496,7 @@ void hostap_init_proc(local_info_t *local) void hostap_remove_proc(local_info_t *local) { - remove_proc_subtree(local->ddev->name, hostap_proc); + proc_remove(local->proc); } -- cgit v1.2.3