From f62d816fc4324afbb7cf90110c70b6a14139b225 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 25 Mar 2011 17:43:41 +0100 Subject: ath9k: fix a chip wakeup related crash in ath9k_start When the chip is still asleep when ath9k_start is called, ath9k_hw_configpcipowersave can trigger a data bus error. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 524825720a09..dddb85de622d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1048,6 +1048,8 @@ static int ath9k_start(struct ieee80211_hw *hw) "Starting driver with initial channel: %d MHz\n", curchan->center_freq); + ath9k_ps_wakeup(sc); + mutex_lock(&sc->mutex); /* setup initial channel */ @@ -1143,6 +1145,8 @@ static int ath9k_start(struct ieee80211_hw *hw) mutex_unlock: mutex_unlock(&sc->mutex); + ath9k_ps_restore(sc); + return r; } -- cgit v1.2.3 From 3bda50e3eaf58a4b9c4ce34204e5faa15c8b1b97 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 14 Mar 2011 14:15:06 +0100 Subject: iwl3945: do not deprecate software scan Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by: Stanislaw Gruszka Acked-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl3945-base.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c index ab87e1b73529..b6c52095bc1a 100644 --- a/drivers/net/wireless/iwlegacy/iwl3945-base.c +++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c @@ -3960,8 +3960,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * "the hard way", rather than using device's scan. */ if (iwl3945_mod_params.disable_hw_scan) { - dev_printk(KERN_DEBUG, &(pdev->dev), - "sw scan support is deprecated\n"); + IWL_DEBUG_INFO(priv, "Disabling hw_scan\n"); iwl3945_hw_ops.hw_scan = NULL; } @@ -4280,8 +4279,7 @@ MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])"); module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, S_IRUGO); -MODULE_PARM_DESC(disable_hw_scan, - "disable hardware scanning (default 0) (deprecated)"); +MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)"); #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "debug output mask"); -- cgit v1.2.3 From 8d4ca61a10feea9583dc62ec1514722e99bdcd3d Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sun, 27 Mar 2011 20:33:06 +0200 Subject: wireless: rt2x00: rt2800usb.c add and identify ids taken from staging/rt2860 0x0411,0x016f de37cd49b5a54facef174cf34496919857436e8f MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63b0679f7fab88ea1cc26b52db8b574ce7 Belkin F5D8055 0x050d,0x935a 705059a670f3af2b37695e82de0ee58e75e656ed Belkin F6D4050 v1 0x050d,0x935b 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: Xose Vazquez Perez Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 4e368657a83c..37509d019910 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -730,8 +730,12 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x825b), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x935a), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x935b), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Buffalo */ { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0411, 0x016f), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Conceptronic */ { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -818,6 +822,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Pegatron */ { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Philips */ { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Planex */ @@ -899,6 +904,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Sitecom */ { USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Toshiba */ + { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Zinwell */ { USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) }, #endif @@ -961,7 +968,6 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Planex */ { USB_DEVICE(0x2019, 0x5201), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -975,8 +981,6 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Sweex */ { USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Toshiba */ - { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Zyxel */ { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) }, #endif -- cgit v1.2.3 From 0263aa45293838b514b8af674a03faf040991a90 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 29 Mar 2011 11:24:21 +0200 Subject: iwl3945: disable hw scan by default After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=683571 and sometimes kernel crashes: https://bugzilla.redhat.com/show_bug.cgi?id=688252 Also with hw scan there are very bad performance on some systems as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=671366 Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl3945-base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c index b6c52095bc1a..28eb3d885ba1 100644 --- a/drivers/net/wireless/iwlegacy/iwl3945-base.c +++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c @@ -93,6 +93,7 @@ MODULE_LICENSE("GPL"); struct iwl_mod_params iwl3945_mod_params = { .sw_crypto = 1, .restart_fw = 1, + .disable_hw_scan = 1, /* the rest are 0 by default */ }; @@ -4279,7 +4280,7 @@ MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])"); module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, S_IRUGO); -MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)"); +MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)"); #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "debug output mask"); -- cgit v1.2.3 From 24047e2c4feb8c126e92cc5bb7a863115c89bd72 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 29 Mar 2011 13:43:14 +0200 Subject: carl9170: Fix tx aggregation problems with some clients Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a BlockAckReq if the transmission of an AMPDU subframe fails. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/carl9170.h | 1 + drivers/net/wireless/ath/carl9170/main.c | 1 + drivers/net/wireless/ath/carl9170/tx.c | 7 +++++++ 3 files changed, 9 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index c6a5fae634a0..9cad061cc1d2 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -443,6 +443,7 @@ struct carl9170_ba_stats { u8 ampdu_len; u8 ampdu_ack_len; bool clear; + bool req; }; struct carl9170_sta_info { diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index ede3d7e5a048..89fe60accf85 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1355,6 +1355,7 @@ static int carl9170_op_ampdu_action(struct ieee80211_hw *hw, tid_info = rcu_dereference(sta_info->agg[tid]); sta_info->stats[tid].clear = true; + sta_info->stats[tid].req = false; if (tid_info) { bitmap_zero(tid_info->bitmap, CARL9170_BAW_SIZE); diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index 0ef70b6fc512..cb70ed7ec5cc 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -383,6 +383,7 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, if (sta_info->stats[tid].clear) { sta_info->stats[tid].clear = false; + sta_info->stats[tid].req = false; sta_info->stats[tid].ampdu_len = 0; sta_info->stats[tid].ampdu_ack_len = 0; } @@ -391,10 +392,16 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, if (txinfo->status.rates[0].count == 1) sta_info->stats[tid].ampdu_ack_len++; + if (!(txinfo->flags & IEEE80211_TX_STAT_ACK)) + sta_info->stats[tid].req = true; + if (super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_IMM_BA)) { super->s.rix = sta_info->stats[tid].ampdu_len; super->s.cnt = sta_info->stats[tid].ampdu_ack_len; txinfo->flags |= IEEE80211_TX_STAT_AMPDU; + if (sta_info->stats[tid].req) + txinfo->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + sta_info->stats[tid].clear = true; } spin_unlock_bh(&tid_info->lock); -- cgit v1.2.3 From ffd8c746fbef50cf12df239f9d23c2afe1a2c3cb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Mar 2011 15:28:11 +0200 Subject: iwlegacy: fix bugs in change_interface If change_interface gets invoked during a firmware restart, it may crash; prevent that from happening by checking if ctx->vif is assigned. Additionally, in my initial commit I forgot to set the vif->p2p variable correctly, so fix that too. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index d418b647be80..a209a0e76bf0 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -1805,6 +1805,15 @@ iwl_legacy_mac_change_interface(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); + if (!ctx->vif || !iwl_legacy_is_ready_rf(priv)) { + /* + * Huh? But wait ... this can maybe happen when + * we're in the middle of a firmware restart! + */ + err = -EBUSY; + goto out; + } + interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; if (!(interface_modes & BIT(newtype))) { @@ -1832,6 +1841,7 @@ iwl_legacy_mac_change_interface(struct ieee80211_hw *hw, /* success */ iwl_legacy_teardown_interface(priv, vif, true); vif->type = newtype; + vif->p2p = newp2p; err = iwl_legacy_setup_interface(priv, ctx); WARN_ON(err); /* -- cgit v1.2.3 From 1591cb60838603c8cc2c540192c8244962436539 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 1 Apr 2011 05:27:51 +0000 Subject: starfire: clean up dma_addr_t size test Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky dma_addr_t size test cleanly. Signed-off-by: FUJITA Tomonori Signed-off-by: David S. Miller --- drivers/net/starfire.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index a4f2bd52e546..36045f3b0327 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -144,11 +144,7 @@ static int full_duplex[MAX_UNITS] = {0, }; /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (2 * HZ) -/* - * This SUCKS. - * We need a much better method to determine if dma_addr_t is 64-bit. - */ -#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || (defined(CONFIG_MIPS) && ((defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || defined(CONFIG_64BIT))) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT)) +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT /* 64-bit dma_addr_t */ #define ADDR_64BITS /* This chip uses 64 bit addresses. */ #define netdrv_addr_t __le64 -- cgit v1.2.3 From c261344d3ce3edac781f9d3c7eabe2e96d8e8fe8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 1 Apr 2011 20:12:02 -0700 Subject: usbnet: use eth%d name for known ethernet devices The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann Tested-by: Andy Green Signed-off-by: David S. Miller --- drivers/net/usb/cdc_eem.c | 2 +- drivers/net/usb/cdc_ether.c | 2 +- drivers/net/usb/cdc_ncm.c | 2 +- drivers/net/usb/cdc_subset.c | 8 ++++++++ drivers/net/usb/gl620a.c | 2 +- drivers/net/usb/net1080.c | 2 +- drivers/net/usb/plusb.c | 2 +- drivers/net/usb/rndis_host.c | 2 +- drivers/net/usb/usbnet.c | 3 ++- drivers/net/usb/zaurus.c | 8 ++++---- 10 files changed, 21 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index 5f3b97668e63..8f128541656d 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -340,7 +340,7 @@ next: static const struct driver_info eem_info = { .description = "CDC EEM Device", - .flags = FLAG_ETHER, + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, .bind = eem_bind, .rx_fixup = eem_rx_fixup, .tx_fixup = eem_tx_fixup, diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 51c259b69278..341f7056a800 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -452,7 +452,7 @@ static int cdc_manage_power(struct usbnet *dev, int on) static const struct driver_info cdc_info = { .description = "CDC Ethernet Device", - .flags = FLAG_ETHER, + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, // .check_connect = cdc_check_connect, .bind = usbnet_cdc_bind, .unbind = usbnet_cdc_unbind, diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 7113168473cf..967371f04454 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1237,7 +1237,7 @@ static int cdc_ncm_manage_power(struct usbnet *dev, int status) static const struct driver_info cdc_ncm_info = { .description = "CDC NCM", - .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET, + .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET, .bind = cdc_ncm_bind, .unbind = cdc_ncm_unbind, .check_connect = cdc_ncm_check_connect, diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c index ca39ace0b0eb..fc5f13d47ad9 100644 --- a/drivers/net/usb/cdc_subset.c +++ b/drivers/net/usb/cdc_subset.c @@ -89,6 +89,7 @@ static int always_connected (struct usbnet *dev) static const struct driver_info ali_m5632_info = { .description = "ALi M5632", + .flags = FLAG_POINTTOPOINT, }; #endif @@ -110,6 +111,7 @@ static const struct driver_info ali_m5632_info = { static const struct driver_info an2720_info = { .description = "AnchorChips/Cypress 2720", + .flags = FLAG_POINTTOPOINT, // no reset available! // no check_connect available! @@ -132,6 +134,7 @@ static const struct driver_info an2720_info = { static const struct driver_info belkin_info = { .description = "Belkin, eTEK, or compatible", + .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_BELKIN */ @@ -157,6 +160,7 @@ static const struct driver_info belkin_info = { static const struct driver_info epson2888_info = { .description = "Epson USB Device", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, .in = 4, .out = 3, }; @@ -173,6 +177,7 @@ static const struct driver_info epson2888_info = { #define HAVE_HARDWARE static const struct driver_info kc2190_info = { .description = "KC Technology KC-190", + .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_KC2190 */ @@ -200,16 +205,19 @@ static const struct driver_info kc2190_info = { static const struct driver_info linuxdev_info = { .description = "Linux Device", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, }; static const struct driver_info yopy_info = { .description = "Yopy", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, }; static const struct driver_info blob_info = { .description = "Boot Loader OBject", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_ARMLINUX */ diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c index dcd57c37ef73..c4cfd1dea881 100644 --- a/drivers/net/usb/gl620a.c +++ b/drivers/net/usb/gl620a.c @@ -193,7 +193,7 @@ static int genelink_bind(struct usbnet *dev, struct usb_interface *intf) static const struct driver_info genelink_info = { .description = "Genesys GeneLink", - .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_GL | FLAG_NO_SETINT, .bind = genelink_bind, .rx_fixup = genelink_rx_fixup, .tx_fixup = genelink_tx_fixup, diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c index ba72a7281cb0..01db4602a39e 100644 --- a/drivers/net/usb/net1080.c +++ b/drivers/net/usb/net1080.c @@ -560,7 +560,7 @@ static int net1080_bind(struct usbnet *dev, struct usb_interface *intf) static const struct driver_info net1080_info = { .description = "NetChip TurboCONNECT", - .flags = FLAG_FRAMING_NC, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_NC, .bind = net1080_bind, .reset = net1080_reset, .check_connect = net1080_check_connect, diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c index 08ad269f6b4e..823c53751307 100644 --- a/drivers/net/usb/plusb.c +++ b/drivers/net/usb/plusb.c @@ -96,7 +96,7 @@ static int pl_reset(struct usbnet *dev) static const struct driver_info prolific_info = { .description = "Prolific PL-2301/PL-2302", - .flags = FLAG_NO_SETINT, + .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT, /* some PL-2302 versions seem to fail usb_set_interface() */ .reset = pl_reset, }; diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index dd8a4adf48ca..5994a25c56ac 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(rndis_tx_fixup); static const struct driver_info rndis_info = { .description = "RNDIS device", - .flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT, + .flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT, .bind = rndis_bind, .unbind = rndis_unbind, .status = rndis_status, diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index cf58b7682565..069c1cf0fdf7 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1380,7 +1380,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better. if ((dev->driver_info->flags & FLAG_ETHER) != 0 && - (net->dev_addr [0] & 0x02) == 0) + ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 || + (net->dev_addr [0] & 0x02) == 0)) strcpy (net->name, "eth%d"); /* WLAN devices should always be named "wlan%d" */ if ((dev->driver_info->flags & FLAG_WLAN) != 0) diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 3eb0b167b5b4..241756e0e86f 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -102,7 +102,7 @@ static int always_connected (struct usbnet *dev) static const struct driver_info zaurus_sl5x00_info = { .description = "Sharp Zaurus SL-5x00", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, @@ -112,7 +112,7 @@ static const struct driver_info zaurus_sl5x00_info = { static const struct driver_info zaurus_pxa_info = { .description = "Sharp Zaurus, PXA-2xx based", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, @@ -122,7 +122,7 @@ static const struct driver_info zaurus_pxa_info = { static const struct driver_info olympus_mxl_info = { .description = "Olympus R1000", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, @@ -258,7 +258,7 @@ bad_desc: static const struct driver_info bogus_mdlm_info = { .description = "pseudo-MDLM (BLAN) device", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .tx_fixup = zaurus_tx_fixup, .bind = blan_mdlm_bind, -- cgit v1.2.3 From a14b289d4614bb3b25d0455d68f72f3c7b4cc8e8 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Sun, 3 Apr 2011 22:04:01 -0700 Subject: mlx4: fix kfree on error path in new_steering_entry() On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: Mariusz Kozlowski Signed-off-by: David S. Miller --- drivers/net/mlx4/mcg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c index 37150b2f6425..c6d336aed2d9 100644 --- a/drivers/net/mlx4/mcg.c +++ b/drivers/net/mlx4/mcg.c @@ -111,7 +111,7 @@ static int new_steering_entry(struct mlx4_dev *dev, u8 vep_num, u8 port, u32 members_count; struct mlx4_steer_index *new_entry; struct mlx4_promisc_qp *pqp; - struct mlx4_promisc_qp *dqp; + struct mlx4_promisc_qp *dqp = NULL; u32 prot; int err; u8 pf_num; @@ -184,7 +184,7 @@ out_mailbox: out_alloc: if (dqp) { list_del(&dqp->list); - kfree(&dqp); + kfree(dqp); } list_del(&new_entry->list); kfree(new_entry); -- cgit v1.2.3