From 91c527a55664ddf4bee26673a35f91748dae4142 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 17 Oct 2016 15:54:05 -0400 Subject: ethernet/intel: use core min/max MTU checking e100: min_mtu 68, max_mtu 1500 - remove e100_change_mtu entirely, is identical to old eth_change_mtu, and no longer serves a purpose. No need to set min_mtu or max_mtu explicitly, as ether_setup() will already set them to 68 and 1500. e1000: min_mtu 46, max_mtu 16110 e1000e: min_mtu 68, max_mtu varies based on adapter fm10k: min_mtu 68, max_mtu 15342 - remove fm10k_change_mtu entirely, does nothing now i40e: min_mtu 68, max_mtu 9706 i40evf: min_mtu 68, max_mtu 9706 igb: min_mtu 68, max_mtu 9216 - There are two different "max" frame sizes claimed and both checked in the driver, the larger value wasn't relevant though, so I've set max_mtu to the smaller of the two values here to retain identical behavior. igbvf: min_mtu 68, max_mtu 9216 - Same issue as igb duplicated ixgb: min_mtu 68, max_mtu 16114 - Also remove pointless old == new check, as that's done in dev_set_mtu ixgbe: min_mtu 68, max_mtu 9710 ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware - Some hw can only handle up to max_mtu 1504 on a vf, others 9710 CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org CC: Jeff Kirsher Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e100.c | 9 ------- drivers/net/ethernet/intel/e1000/e1000_main.c | 12 ++++----- drivers/net/ethernet/intel/e1000e/netdev.c | 14 +++++----- drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 15 +++-------- drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++---- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 8 +++--- drivers/net/ethernet/intel/igb/e1000_defines.h | 3 ++- drivers/net/ethernet/intel/igb/igb_main.c | 15 +++-------- drivers/net/ethernet/intel/igbvf/defines.h | 3 ++- drivers/net/ethernet/intel/igbvf/netdev.c | 14 +++------- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 16 +++-------- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 ++++---- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 33 ++++++++++++----------- 13 files changed, 62 insertions(+), 101 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 068789e694c9..25c6dfd500b4 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2286,14 +2286,6 @@ static int e100_set_mac_address(struct net_device *netdev, void *p) return 0; } -static int e100_change_mtu(struct net_device *netdev, int new_mtu) -{ - if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN) - return -EINVAL; - netdev->mtu = new_mtu; - return 0; -} - static int e100_asf(struct nic *nic) { /* ASF can be enabled from eeprom */ @@ -2834,7 +2826,6 @@ static const struct net_device_ops e100_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = e100_set_multicast_list, .ndo_set_mac_address = e100_set_mac_address, - .ndo_change_mtu = e100_change_mtu, .ndo_do_ioctl = e100_do_ioctl, .ndo_tx_timeout = e100_tx_timeout, #ifdef CONFIG_NET_POLL_CONTROLLER diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index f42129d09e2c..33076fa98002 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1085,6 +1085,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) hw->subsystem_vendor_id != PCI_VENDOR_ID_VMWARE) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 46 - 16110 */ + netdev->min_mtu = ETH_ZLEN - ETH_HLEN; + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN); + adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); /* initialize eeprom parameters */ @@ -3549,13 +3553,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; - - if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - e_err(probe, "Invalid MTU setting\n"); - return -EINVAL; - } + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; /* Adapter-specific max frame size limits. */ switch (hw->mac_type) { diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 7017281ba2dc..8759d9236930 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5974,19 +5974,12 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ - if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) && + if ((new_mtu > ETH_DATA_LEN) && !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { e_err("Jumbo Frames not supported.\n"); return -EINVAL; } - /* Supported frame sizes */ - if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) || - (max_frame > adapter->max_hw_frame_size)) { - e_err("Unsupported MTU setting\n"); - return -EINVAL; - } - /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ if ((adapter->hw.mac.type >= e1000_pch2lan) && !(adapter->flags2 & FLAG2_CRC_STRIPPING) && @@ -7187,6 +7180,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->vlan_features |= NETIF_F_HIGHDMA; } + /* MTU range: 68 - max_hw_frame_size */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = adapter->max_hw_frame_size - + (VLAN_ETH_HLEN + ETH_FCS_LEN); + if (e1000e_enable_mng_pass_thru(&adapter->hw)) adapter->flags |= FLAG_MNG_PT_ENABLED; diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c index 05629381be6b..bc5ef6eb3dd6 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c @@ -706,16 +706,6 @@ static netdev_tx_t fm10k_xmit_frame(struct sk_buff *skb, struct net_device *dev) return err; } -static int fm10k_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu < 68 || new_mtu > FM10K_MAX_JUMBO_FRAME_SIZE) - return -EINVAL; - - dev->mtu = new_mtu; - - return 0; -} - /** * fm10k_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure @@ -1405,7 +1395,6 @@ static const struct net_device_ops fm10k_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_start_xmit = fm10k_xmit_frame, .ndo_set_mac_address = fm10k_set_mac, - .ndo_change_mtu = fm10k_change_mtu, .ndo_tx_timeout = fm10k_tx_timeout, .ndo_vlan_rx_add_vid = fm10k_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = fm10k_vlan_rx_kill_vid, @@ -1490,5 +1479,9 @@ struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info) dev->hw_features |= hw_features; + /* MTU range: 68 - 15342 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = FM10K_MAX_JUMBO_FRAME_SIZE; + return dev; } diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index ac1faee2a5b8..83edbe8e3618 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -2239,13 +2239,8 @@ static void i40e_sync_filters_subtask(struct i40e_pf *pf) static int i40e_change_mtu(struct net_device *netdev, int new_mtu) { struct i40e_netdev_priv *np = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; struct i40e_vsi *vsi = np->vsi; - /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER)) - return -EINVAL; - netdev_info(netdev, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; @@ -9220,6 +9215,11 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) i40e_fcoe_config_netdev(netdev, vsi); #endif + /* MTU range: 68 - 9706 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = I40E_MAX_RXBUFFER - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + return 0; } diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 14372810fc27..777eb29e4ff7 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -2133,10 +2133,6 @@ static struct net_device_stats *i40evf_get_stats(struct net_device *netdev) static int i40evf_change_mtu(struct net_device *netdev, int new_mtu) { struct i40evf_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - - if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER)) - return -EINVAL; netdev->mtu = new_mtu; adapter->flags |= I40EVF_FLAG_RESET_NEEDED; @@ -2424,6 +2420,10 @@ static void i40evf_init_task(struct work_struct *work) i40evf_set_ethtool_ops(netdev); netdev->watchdog_timeo = 5 * HZ; + /* MTU range: 68 - 9710 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = I40E_MAX_RXBUFFER - (ETH_HLEN + ETH_FCS_LEN); + if (!is_valid_ether_addr(adapter->hw.mac.addr)) { dev_info(&pdev->dev, "Invalid MAC address %pM, using random\n", adapter->hw.mac.addr); diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 2688180a7acd..8aee314332a8 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -357,7 +357,8 @@ #define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */ -#define MAX_JUMBO_FRAME_SIZE 0x2600 +#define MAX_JUMBO_FRAME_SIZE 0x2600 +#define MAX_STD_JUMBO_FRAME_SIZE 9216 /* PBA constants */ #define E1000_PBA_34K 0x0022 diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index edc9a6ac5169..4feca69e5833 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2468,6 +2468,10 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 68 - 9216 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE; + adapter->en_mng_pt = igb_enable_mng_pass_thru(hw); /* before reading the NVM, reset the controller to put the device in a @@ -5408,17 +5412,6 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu) struct pci_dev *pdev = adapter->pdev; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - dev_err(&pdev->dev, "Invalid MTU setting\n"); - return -EINVAL; - } - -#define MAX_STD_JUMBO_FRAME_SIZE 9238 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - dev_err(&pdev->dev, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - /* adjust max frame to be at least the size of a standard frame */ if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; diff --git a/drivers/net/ethernet/intel/igbvf/defines.h b/drivers/net/ethernet/intel/igbvf/defines.h index ee1ef08d7fc4..f1789d192e24 100644 --- a/drivers/net/ethernet/intel/igbvf/defines.h +++ b/drivers/net/ethernet/intel/igbvf/defines.h @@ -85,7 +85,8 @@ #define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ #define E1000_TXD_STAT_DD 0x00000001 /* Desc Done */ -#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define MAX_STD_JUMBO_FRAME_SIZE 9216 /* 802.1q VLAN Packet Size */ #define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 12bb877df860..810fcf7aa2c6 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2356,16 +2356,6 @@ static int igbvf_change_mtu(struct net_device *netdev, int new_mtu) struct igbvf_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - if (new_mtu < 68 || new_mtu > INT_MAX - ETH_HLEN - ETH_FCS_LEN || - max_frame > MAX_JUMBO_FRAME_SIZE) - return -EINVAL; - -#define MAX_STD_JUMBO_FRAME_SIZE 9234 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) usleep_range(1000, 2000); /* igbvf_down has a dependency on max_frame_size */ @@ -2786,6 +2776,10 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX; + /* MTU range: 68 - 9216 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE; + /*reset the controller to put the device in a known good state */ err = hw->mac.ops.reset_hw(hw); if (err) { diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index 31f91459312f..5826b1ddedcf 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -487,6 +487,10 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->vlan_features |= NETIF_F_HIGHDMA; } + /* MTU range: 68 - 16114 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = IXGB_MAX_JUMBO_FRAME_SIZE - ETH_HLEN; + /* make sure the EEPROM is good */ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { @@ -1619,18 +1623,6 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu) { struct ixgb_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - - /* MTU < 68 is an error for IPv4 traffic, just don't allow it */ - if ((new_mtu < 68) || - (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) { - netif_err(adapter, probe, adapter->netdev, - "Invalid MTU setting %d\n", new_mtu); - return -EINVAL; - } - - if (old_max_frame == max_frame) - return 0; if (netif_running(netdev)) ixgb_down(adapter, true); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 784b0b98ab2f..7dfde209b0e0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6049,11 +6049,6 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - - /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) - return -EINVAL; /* * For 82599EB we cannot allow legacy VFs to enable their receive @@ -6062,7 +6057,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) */ if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (adapter->hw.mac.type == ixgbe_mac_82599EB) && - (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) + (new_mtu > ETH_DATA_LEN)) e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -9608,6 +9603,10 @@ skip_sriov: netdev->priv_flags |= IFF_UNICAST_FLT; netdev->priv_flags |= IFF_SUPP_NOFCS; + /* MTU range: 68 - 9710 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN); + #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_CAPABLE) netdev->dcbnl_ops = &dcbnl_ops; diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 7eaac3234049..d2775f032f74 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3742,24 +3742,8 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu) struct ixgbevf_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - int max_possible_frame = MAXIMUM_ETHERNET_VLAN_SIZE; int ret; - switch (adapter->hw.api_version) { - case ixgbe_mbox_api_11: - case ixgbe_mbox_api_12: - max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE; - break; - default: - if (adapter->hw.mac.type != ixgbe_mac_82599_vf) - max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE; - break; - } - - /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > max_possible_frame)) - return -EINVAL; - spin_lock_bh(&adapter->mbx_lock); /* notify the PF of our intent to use this size of frame */ ret = hw->mac.ops.set_rlpml(hw, max_frame); @@ -4104,6 +4088,23 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 68 - 1504 or 9710 */ + netdev->min_mtu = ETH_MIN_MTU; + switch (adapter->hw.api_version) { + case ixgbe_mbox_api_11: + case ixgbe_mbox_api_12: + netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN); + break; + default: + if (adapter->hw.mac.type != ixgbe_mac_82599_vf) + netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN); + else + netdev->max_mtu = ETH_DATA_LEN + ETH_FCS_LEN; + break; + } + if (IXGBE_REMOVED(hw->hw_addr)) { err = -EIO; goto err_sw_init; -- cgit v1.2.3