From 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 25 Nov 2010 18:26:07 +0100 Subject: ath9k: use per-device struct for pm_qos_* operations The ath9k driver uses a shared pm_qos_request_list structure for all devices. This causes the following warning if more than one device is present in the system: WARNING: at kernel/pm_qos_params.c:234 ath9k_init_device+0x5e8/0x6b0() pm_qos_add_request() called for already added request Modules linked in: Call Trace: [<802b1cdc>] dump_stack+0x8/0x34 [<8007dd90>] warn_slowpath_common+0x78/0xa4 [<8007de44>] warn_slowpath_fmt+0x2c/0x38 [<801b0828>] ath9k_init_device+0x5e8/0x6b0 [<801bc508>] ath_pci_probe+0x2dc/0x39c [<80176254>] pci_device_probe+0x64/0xa4 [<8019471c>] driver_probe_device+0xbc/0x188 [<80194854>] __driver_attach+0x6c/0xa4 [<80193e20>] bus_for_each_dev+0x60/0xb0 [<80193580>] bus_add_driver+0xcc/0x268 [<80194c08>] driver_register+0xe0/0x198 [<801764e0>] __pci_register_driver+0x50/0xe0 [<80365f48>] ath9k_init+0x3c/0x6c [<8006050c>] do_one_initcall+0xfc/0x1d8 [<80355340>] kernel_init+0xd4/0x174 [<800639a4>] kernel_thread_helper+0x10/0x18 ---[ end trace 5345fc6f870564a6 ]--- This patch fixes that warning by using a separate pm_qos_request_list sructure for each device. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 4 +++- drivers/net/wireless/ath/ath9k/init.c | 7 ++----- drivers/net/wireless/ath/ath9k/main.c | 5 ++--- 3 files changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 170d44a35ccb..0d0bec3628ec 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,6 +21,7 @@ #include #include #include +#include #include "debug.h" #include "common.h" @@ -646,6 +647,8 @@ struct ath_softc { struct ath_descdma txsdma; struct ath_ant_comb ant_comb; + + struct pm_qos_request_list pm_qos_req; }; struct ath_wiphy { @@ -675,7 +678,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) } extern struct ieee80211_ops ath9k_ops; -extern struct pm_qos_request_list ath9k_pm_qos_req; extern int modparam_nohwcrypt; extern int led_blink; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 92bc5c5f4876..c29eea26a777 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -15,7 +15,6 @@ */ #include -#include #include "ath9k.h" @@ -180,8 +179,6 @@ static const struct ath_ops ath9k_common_ops = { .write = ath9k_iowrite32, }; -struct pm_qos_request_list ath9k_pm_qos_req; - /**************************/ /* Initialization */ /**************************/ @@ -759,7 +756,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); - pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE); return 0; @@ -830,7 +827,7 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); - pm_qos_remove_request(&ath9k_pm_qos_req); + pm_qos_remove_request(&sc->pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 25d3ef4c338e..1cdbdbe33ab5 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -15,7 +15,6 @@ */ #include -#include #include "ath9k.h" #include "btcoex.h" @@ -1244,7 +1243,7 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } - pm_qos_update_request(&ath9k_pm_qos_req, 55); + pm_qos_update_request(&sc->pm_qos_req, 55); mutex_unlock: mutex_unlock(&sc->mutex); @@ -1423,7 +1422,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; - pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE); + pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE); mutex_unlock(&sc->mutex); -- cgit v1.2.3 From c426ee247e40a70490f3d67d3c9c7d1aba54516f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Nov 2010 11:38:04 +0100 Subject: ath9k/carl9170: advertise P2P With some upcoming changes we'd like to use the interface types for P2P capability tests. Enable them now so that when we add those tests in wpa_supplicant, nothing will break. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 2 ++ drivers/net/wireless/ath/carl9170/fw.c | 3 ++- drivers/net/wireless/ath/carl9170/main.c | 3 ++- 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index c29eea26a777..14b8ab386daf 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -661,6 +661,8 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->flags |= IEEE80211_HW_MFP_CAPABLE; hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_STATION) | diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index ae6c006bbc56..546b4e4ec5ea 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -291,7 +291,8 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) if (SUPP(CARL9170FW_WLANTX_CAB)) { ar->hw->wiphy->interface_modes |= - BIT(NL80211_IFTYPE_AP); + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_GO); } } diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index a314c2c2bfbe..dc7b30b170d0 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1631,7 +1631,8 @@ void *carl9170_alloc(size_t priv_size) * supports these modes. The code which will add the * additional interface_modes is in fw.c. */ - hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_P2P_CLIENT); hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_REPORTS_TX_ACK_STATUS | -- cgit v1.2.3 From 46047784b8cdcfc916f6c1cccee0c18dd1223dfd Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 26 Nov 2010 23:24:31 +0530 Subject: ath9k: Disable SWBA interrupt on remove_interface while removing beaconing mode interface, SWBA interrupt was never disabled when there are no other beaconing interfaces. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 1cdbdbe33ab5..dace215b693e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1519,6 +1519,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, struct ath_softc *sc = aphy->sc; struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_vif *avp = (void *)vif->drv_priv; + bool bs_valid = false; int i; ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n"); @@ -1547,7 +1548,15 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, "slot\n", __func__); sc->beacon.bslot[i] = NULL; sc->beacon.bslot_aphy[i] = NULL; - } + } else if (sc->beacon.bslot[i]) + bs_valid = true; + } + if (!bs_valid && (sc->sc_ah->imask & ATH9K_INT_SWBA)) { + /* Disable SWBA interrupt */ + sc->sc_ah->imask &= ~ATH9K_INT_SWBA; + ath9k_ps_wakeup(sc); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask); + ath9k_ps_restore(sc); } sc->nvifs--; -- cgit v1.2.3 From 5c5e138b590a748c57d54b39634cda974ab9af1d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 26 Nov 2010 23:29:23 +0100 Subject: carl9170: fix carl9170_tx_prepare typo commit: "carl9170: revamp carl9170_tx_prepare" introduced a peculiar bug that would only show up if the the module parameter noht is set to 1. Then all outbound voice, video and background frames would each invoke a (bogus) RTS/CTS handshake. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index b575c865142d..7e6506a77bbb 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -810,7 +810,7 @@ static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb) mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION | AR9170_TX_MAC_BACKOFF); - mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) && + mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) & AR9170_TX_MAC_QOS); no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK); -- cgit v1.2.3 From 916448e77f6bcaaa7f13c3de0c3851783ae2bfd0 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Tue, 30 Nov 2010 20:15:39 +0530 Subject: ath9k: Fix STA disconnect issue due to received MIC failed bcast frames AR_RxKeyIdxValid will not be set for bcast/mcast frames and so relying this status for MIC failed frames is buggy. Due to this, MIC failure events for broadcast frames are not sent to supplicant resulted in AP disconnecting the STA. Able to pass Wifi Test case 5.2.18 with this fix. Cc: Stable (2.6.36+) Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 3 +-- drivers/net/wireless/ath/ath9k/recv.c | 4 +++- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 8c13479b17cd..c996963ab339 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -703,8 +703,7 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds, rs->rs_phyerr = phyerr; } else if (ads.ds_rxstatus8 & AR_DecryptCRCErr) rs->rs_status |= ATH9K_RXERR_DECRYPT; - else if ((ads.ds_rxstatus8 & AR_MichaelErr) && - rs->rs_keyix != ATH9K_RXKEYIX_INVALID) + else if (ads.ds_rxstatus8 & AR_MichaelErr) rs->rs_status |= ATH9K_RXERR_MIC; else if (ads.ds_rxstatus8 & AR_KeyMiss) rs->rs_status |= ATH9K_RXERR_DECRYPT; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 1a62e351ec77..14d479f8d8ac 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1049,9 +1049,11 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, int hdrlen, padpos, padsize; u8 keyix; __le16 fc; + bool is_mc; /* see if any padding is done by the hw and remove it */ hdr = (struct ieee80211_hdr *) skb->data; + is_mc = !!is_multicast_ether_addr(hdr->addr1); hdrlen = ieee80211_get_hdrlen_from_skb(skb); fc = hdr->frame_control; padpos = ath9k_cmn_padpos(hdr->frame_control); @@ -1072,7 +1074,7 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, keyix = rx_stats->rs_keyix; - if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error && + if ((is_mc || !(keyix == ATH9K_RXKEYIX_INVALID)) && !decrypt_error && ieee80211_has_protected(fc)) { rxs->flag |= RX_FLAG_DECRYPTED; } else if (ieee80211_has_protected(fc) -- cgit v1.2.3 From 9306990a656d9cfd8bf3586938012729c1f2ea50 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Tue, 30 Nov 2010 23:24:09 -0800 Subject: ath9k: Fix bug in reading input gpio state for ar9003 The register which gives input gpio state is 0x404c for ar9003, currently 0x4048 is wrongly used. This will disable RF and make it unusable on some of AR9003. Cc:stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 3 ++- drivers/net/wireless/ath/ath9k/reg.h | 6 ++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 6ebc68bca91f..c7fbe25cc128 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2044,7 +2044,8 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio) val = REG_READ(ah, AR7010_GPIO_IN); return (MS(val, AR7010_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) == 0; } else if (AR_SREV_9300_20_OR_LATER(ah)) - return MS_REG_READ(AR9300, gpio) != 0; + return (MS(REG_READ(ah, AR_GPIO_IN), AR9300_GPIO_IN_VAL) & + AR_GPIO_BIT(gpio)) != 0; else if (AR_SREV_9271(ah)) return MS_REG_READ(AR9271, gpio) != 0; else if (AR_SREV_9287_11_OR_LATER(ah)) diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index dddf579aacf1..2c6a22fbb0f0 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -984,11 +984,13 @@ enum { #define AR9287_GPIO_IN_VAL_S 11 #define AR9271_GPIO_IN_VAL 0xFFFF0000 #define AR9271_GPIO_IN_VAL_S 16 -#define AR9300_GPIO_IN_VAL 0x0001FFFF -#define AR9300_GPIO_IN_VAL_S 0 #define AR7010_GPIO_IN_VAL 0x0000FFFF #define AR7010_GPIO_IN_VAL_S 0 +#define AR_GPIO_IN 0x404c +#define AR9300_GPIO_IN_VAL 0x0001FFFF +#define AR9300_GPIO_IN_VAL_S 0 + #define AR_GPIO_OE_OUT (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c) #define AR_GPIO_OE_OUT_DRV 0x3 #define AR_GPIO_OE_OUT_DRV_NO 0x0 -- cgit v1.2.3 From e702ba18f25887c76d26c8a85cc1706463c62e9a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 1 Dec 2010 19:07:46 +0100 Subject: ath9k_hw: fix endian issues with CTLs on AR9003 Parsing data using bitfields is messy, because it makes endian handling much harder. AR9002 and earlier got it right, AR9003 got it wrong. This might lead to either using too high or too low tx power values, depending on frequency and eeprom settings. Fix it by getting rid of the CTL related bitfields entirely and use masks instead. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 73 ++++++++++++++------------ drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 9 +--- drivers/net/wireless/ath/ath9k/eeprom.c | 6 +-- drivers/net/wireless/ath/ath9k/eeprom.h | 13 ++--- 4 files changed, 47 insertions(+), 54 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index c4182359bee4..a7b82f0085d2 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -55,6 +55,8 @@ #define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ #define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ +#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6)) + static const struct ar9300_eeprom ar9300_default = { .eepromVersion = 2, .templateVersion = 2, @@ -290,20 +292,21 @@ static const struct ar9300_eeprom ar9300_default = { } }, .ctlPowerData_2G = { - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, + { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, - { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, }, .modalHeader5G = { /* 4 idle,t1,t2,b (4 bits per setting) */ @@ -568,56 +571,56 @@ static const struct ar9300_eeprom ar9300_default = { .ctlPowerData_5G = { { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), } }, { { - {60, 0}, {60, 1}, {60, 0}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 1}, + CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), } }, { { - {60, 0}, {60, 1}, {60, 1}, {60, 0}, - {60, 1}, {60, 0}, {60, 0}, {60, 0}, + CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0), + CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 0}, - {60, 0}, {60, 0}, {60, 0}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), + CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 0}, {60, 0}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 1}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), } }, { { - {60, 1}, {60, 1}, {60, 0}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), } }, { { - {60, 1}, {60, 0}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 0}, {60, 1}, + CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), } }, } @@ -1827,9 +1830,9 @@ static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep, struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; if (is2GHz) - return ctl_2g[idx].ctlEdges[edge].tPower; + return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]); else - return ctl_5g[idx].ctlEdges[edge].tPower; + return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]); } static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep, @@ -1847,12 +1850,12 @@ static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep, if (is2GHz) { if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq && - ctl_2g[idx].ctlEdges[edge - 1].flag) - return ctl_2g[idx].ctlEdges[edge - 1].tPower; + CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1])) + return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]); } else { if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq && - ctl_5g[idx].ctlEdges[edge - 1].flag) - return ctl_5g[idx].ctlEdges[edge - 1].tPower; + CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1])) + return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]); } return AR9300_MAX_RATE_POWER; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 3c533bb983c7..655b3033396c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -261,17 +261,12 @@ struct cal_tgt_pow_ht { u8 tPow2x[14]; } __packed; -struct cal_ctl_edge_pwr { - u8 tPower:6, - flag:2; -} __packed; - struct cal_ctl_data_2g { - struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G]; + u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G]; } __packed; struct cal_ctl_data_5g { - struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G]; + u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G]; } __packed; struct ar9300_eeprom { diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c index 1266333f586d..2bbf94d0191e 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.c +++ b/drivers/net/wireless/ath/ath9k/eeprom.c @@ -240,16 +240,16 @@ u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower, for (i = 0; (i < num_band_edges) && (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) { if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) { - twiceMaxEdgePower = pRdEdgesPower[i].tPower; + twiceMaxEdgePower = CTL_EDGE_TPOWER(pRdEdgesPower[i].ctl); break; } else if ((i > 0) && (freq < ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz))) { if (ath9k_hw_fbin2freq(pRdEdgesPower[i - 1].bChannel, is2GHz) < freq && - pRdEdgesPower[i - 1].flag) { + CTL_EDGE_FLAGS(pRdEdgesPower[i - 1].ctl)) { twiceMaxEdgePower = - pRdEdgesPower[i - 1].tPower; + CTL_EDGE_TPOWER(pRdEdgesPower[i - 1].ctl); } break; } diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index dacb45e1b906..41ad1fe62527 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -233,6 +233,9 @@ #define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1) +#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f) +#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03) + enum eeprom_param { EEP_NFTHRESH_5, EEP_NFTHRESH_2, @@ -535,18 +538,10 @@ struct cal_target_power_ht { u8 tPow2x[8]; } __packed; - -#ifdef __BIG_ENDIAN_BITFIELD -struct cal_ctl_edges { - u8 bChannel; - u8 flag:2, tPower:6; -} __packed; -#else struct cal_ctl_edges { u8 bChannel; - u8 tPower:6, flag:2; + u8 ctl; } __packed; -#endif struct cal_data_op_loop_ar9287 { u8 pwrPdg[2][5]; -- cgit v1.2.3 From f67e07eb3decd7840b621fba37fd600adfdf99f8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 1 Dec 2010 19:07:47 +0100 Subject: ath9k_hw: fix more bitfield related endian issues A few LNA control related flags were also specified as a bitfields, however for some strange reason they were written in big-endian order this time. Fix this by using flags instead. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom.h | 14 ++++++++++---- drivers/net/wireless/ath/ath9k/eeprom_def.c | 11 ++++++----- 2 files changed, 16 insertions(+), 9 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 41ad1fe62527..dd59f09441a3 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -236,6 +236,15 @@ #define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f) #define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03) +#define LNA_CTL_BUF_MODE BIT(0) +#define LNA_CTL_ISEL_LO BIT(1) +#define LNA_CTL_ISEL_HI BIT(2) +#define LNA_CTL_BUF_IN BIT(3) +#define LNA_CTL_FEM_BAND BIT(4) +#define LNA_CTL_LOCAL_BIAS BIT(5) +#define LNA_CTL_FORCE_XPA BIT(6) +#define LNA_CTL_USE_ANT1 BIT(7) + enum eeprom_param { EEP_NFTHRESH_5, EEP_NFTHRESH_2, @@ -381,10 +390,7 @@ struct modal_eep_header { u8 xatten2Margin[AR5416_MAX_CHAINS]; u8 ob_ch1; u8 db_ch1; - u8 useAnt1:1, - force_xpaon:1, - local_bias:1, - femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1; + u8 lna_ctl; u8 miscBits; u16 xpaBiasLvlFreq[3]; u8 futureModal[6]; diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index 76b4d65472dd..526d7c933f7f 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -451,9 +451,10 @@ static void ath9k_hw_def_set_board_values(struct ath_hw *ah, ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2, AR_AN_TOP2_LOCALBIAS, AR_AN_TOP2_LOCALBIAS_S, - pModal->local_bias); + !!(pModal->lna_ctl & + LNA_CTL_LOCAL_BIAS)); REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG, - pModal->force_xpaon); + !!(pModal->lna_ctl & LNA_CTL_FORCE_XPA)); } REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, @@ -1428,9 +1429,9 @@ static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah, num_ant_config = 1; - if (pBase->version >= 0x0E0D) - if (pModal->useAnt1) - num_ant_config += 1; + if (pBase->version >= 0x0E0D && + (pModal->lna_ctl & LNA_CTL_USE_ANT1)) + num_ant_config += 1; return num_ant_config; } -- cgit v1.2.3 From d89197c7f34934fbb0f96d938a0d6cfe0b8bcb1c Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 2 Dec 2010 14:10:58 -0500 Subject: Revert "ath9k: Fix STA disconnect issue due to received MIC failed bcast frames" This reverts commit 916448e77f6bcaaa7f13c3de0c3851783ae2bfd0. "As far as I can tell, either of these patches breaks multiple VIF scenarios. I'm not sure exactly why, but I had to revert this to get any of my interfaces to associate." -- Ben Greear http://marc.info/?l=linux-wireless&m=129123368719339&w=2 Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 3 ++- drivers/net/wireless/ath/ath9k/recv.c | 4 +--- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index c996963ab339..8c13479b17cd 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -703,7 +703,8 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds, rs->rs_phyerr = phyerr; } else if (ads.ds_rxstatus8 & AR_DecryptCRCErr) rs->rs_status |= ATH9K_RXERR_DECRYPT; - else if (ads.ds_rxstatus8 & AR_MichaelErr) + else if ((ads.ds_rxstatus8 & AR_MichaelErr) && + rs->rs_keyix != ATH9K_RXKEYIX_INVALID) rs->rs_status |= ATH9K_RXERR_MIC; else if (ads.ds_rxstatus8 & AR_KeyMiss) rs->rs_status |= ATH9K_RXERR_DECRYPT; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 14d479f8d8ac..1a62e351ec77 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1049,11 +1049,9 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, int hdrlen, padpos, padsize; u8 keyix; __le16 fc; - bool is_mc; /* see if any padding is done by the hw and remove it */ hdr = (struct ieee80211_hdr *) skb->data; - is_mc = !!is_multicast_ether_addr(hdr->addr1); hdrlen = ieee80211_get_hdrlen_from_skb(skb); fc = hdr->frame_control; padpos = ath9k_cmn_padpos(hdr->frame_control); @@ -1074,7 +1072,7 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, keyix = rx_stats->rs_keyix; - if ((is_mc || !(keyix == ATH9K_RXKEYIX_INVALID)) && !decrypt_error && + if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error && ieee80211_has_protected(fc)) { rxs->flag |= RX_FLAG_DECRYPTED; } else if (ieee80211_has_protected(fc) -- cgit v1.2.3