From 6fcdf4facb85e7d54ff6195378dd2ba8e0baccc4 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 30 Jan 2013 21:50:08 -0500 Subject: wanrouter: delete now orphaned header content, files/drivers The wanrouter support was identified earlier as unused for years, and so the previous commit totally decoupled it from the kernel, leaving the related wanrouter files present, but totally inert. Here we take the final step in that cleanup, by doing a wholesale removal of these files. The two step process is used so that the large deletion is decoupled from the git history of files that we still care about. The drivers deleted here all were dependent on the Kconfig setting CONFIG_WAN_ROUTER_DRIVERS. A stub wanrouter.h header (kernel & uapi) are left behind so that drivers/isdn/i4l/isdn_x25iface.c continues to compile, and so that we don't accidentally break userspace that expected these defines. Cc: Joe Perches Cc: Dan Carpenter Cc: Arnaldo Carvalho de Melo Signed-off-by: Paul Gortmaker --- drivers/net/wan/cycx_drv.c | 569 --------------- drivers/net/wan/cycx_main.c | 346 ---------- drivers/net/wan/cycx_x25.c | 1602 ------------------------------------------- 3 files changed, 2517 deletions(-) delete mode 100644 drivers/net/wan/cycx_drv.c delete mode 100644 drivers/net/wan/cycx_main.c delete mode 100644 drivers/net/wan/cycx_x25.c (limited to 'drivers/net/wan') diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c deleted file mode 100644 index 2a3ecae67a90..000000000000 --- a/drivers/net/wan/cycx_drv.c +++ /dev/null @@ -1,569 +0,0 @@ -/* -* cycx_drv.c Cyclom 2X Support Module. -* -* This module is a library of common hardware specific -* functions used by the Cyclades Cyclom 2X sync card. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdladrv.c by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code -* cleanup -* 1999/11/08 acme init_cyc2x deleted, doing nothing -* 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and -* fromio to use dpmbase ioremaped -* 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to -* & fromio -* 1999/10/23 acme cleanup to only supports cyclom2x: all the other -* boards are no longer manufactured by cyclades, -* if someone wants to support them... be my guest! -* 1999/05/28 acme cycx_intack & cycx_intde gone for good -* 1999/05/18 acme lots of unlogged work, submitting to Linus... -* 1999/01/03 acme more judicious use of data types -* 1999/01/03 acme judicious use of data types :> -* cycx_inten trying to reset pending interrupts -* from cyclom 2x - I think this isn't the way to -* go, but for now... -* 1999/01/02 acme cycx_intack ok, I think there's nothing to do -* to ack an int in cycx_drv.c, only handle it in -* cyx_isr (or in the other protocols: cyp_isr, -* cyf_isr, when they get implemented. -* Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing -* fingers to see x25_configure in cycx_x25.c -* work... :) -* Dec 26, 1998 acme load implementation fixed, seems to work! :) -* cycx_2x_dpmbase_options with all the possible -* DPM addresses (20). -* cycx_intr implemented (test this!) -* general code cleanup -* Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation. -* Aug 8, 1998 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include /* __init */ -#include -#include /* printk(), and other useful stuff */ -#include /* offsetof(), etc. */ -#include /* return codes */ -#include /* API definitions */ -#include /* CYCX firmware module definitions */ -#include /* udelay, msleep_interruptible */ -#include /* read[wl], write[wl], ioremap, iounmap */ - -#define MOD_VERSION 0 -#define MOD_RELEASE 6 - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver"); -MODULE_LICENSE("GPL"); - -/* Hardware-specific functions */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len); -static void cycx_bootcfg(struct cycx_hw *hw); - -static int reset_cyc2x(void __iomem *addr); -static int detect_cyc2x(void __iomem *addr); - -/* Miscellaneous functions */ -static int get_option_index(const long *optlist, long optval); -static u16 checksum(u8 *buf, u32 len); - -#define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET) - -/* Global Data */ - -/* private data */ -static const char fullname[] = "Cyclom 2X Support Module"; -static const char copyright[] = - "(c) 1998-2003 Arnaldo Carvalho de Melo "; - -/* Hardware configuration options. - * These are arrays of configuration options used by verification routines. - * The first element of each array is its size (i.e. number of options). - */ -static const long cyc2x_dpmbase_options[] = { - 20, - 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000, - 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000, - 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000 -}; - -static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; - -/* Kernel Loadable Module Entry Points */ -/* Module 'insert' entry point. - * o print announcement - * o initialize static data - * - * Return: 0 Ok - * < 0 error. - * Context: process */ - -static int __init cycx_drv_init(void) -{ - pr_info("%s v%u.%u %s\n", - fullname, MOD_VERSION, MOD_RELEASE, copyright); - - return 0; -} - -/* Module 'remove' entry point. - * o release all remaining system resources */ -static void cycx_drv_cleanup(void) -{ -} - -/* Kernel APIs */ -/* Set up adapter. - * o detect adapter type - * o verify hardware configuration options - * o check for hardware conflicts - * o set up adapter shared memory - * o test adapter memory - * o load firmware - * Return: 0 ok. - * < 0 error */ -EXPORT_SYMBOL(cycx_setup); -int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase) -{ - int err; - - /* Verify IRQ configuration options */ - if (!get_option_index(cycx_2x_irq_options, hw->irq)) { - pr_err("IRQ %d is invalid!\n", hw->irq); - return -EINVAL; - } - - /* Setup adapter dual-port memory window and test memory */ - if (!dpmbase) { - pr_err("you must specify the dpm address!\n"); - return -EINVAL; - } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) { - pr_err("memory address 0x%lX is invalid!\n", dpmbase); - return -EINVAL; - } - - hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE); - hw->dpmsize = CYCX_WINDOWSIZE; - - if (!detect_cyc2x(hw->dpmbase)) { - pr_err("adapter Cyclom 2X not found at address 0x%lX!\n", - dpmbase); - return -EINVAL; - } - - pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase); - - /* Load firmware. If loader fails then shut down adapter */ - err = load_cyc2x(hw, cfm, len); - - if (err) - cycx_down(hw); /* shutdown adapter */ - - return err; -} - -EXPORT_SYMBOL(cycx_down); -int cycx_down(struct cycx_hw *hw) -{ - iounmap(hw->dpmbase); - return 0; -} - -/* Enable interrupt generation. */ -static void cycx_inten(struct cycx_hw *hw) -{ - writeb(0, hw->dpmbase); -} - -/* Generate an interrupt to adapter's CPU. */ -EXPORT_SYMBOL(cycx_intr); -void cycx_intr(struct cycx_hw *hw) -{ - writew(0, hw->dpmbase + GEN_CYCX_INTR); -} - -/* Execute Adapter Command. - * o Set exec flag. - * o Busy-wait until flag is reset. */ -EXPORT_SYMBOL(cycx_exec); -int cycx_exec(void __iomem *addr) -{ - u16 i = 0; - /* wait till addr content is zeroed */ - - while (readw(addr)) { - udelay(1000); - - if (++i > 50) - return -1; - } - - return 0; -} - -/* Read absolute adapter memory. - * Transfer data from adapter's memory to data buffer. */ -EXPORT_SYMBOL(cycx_peek); -int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - *(u8*)buf = readb(hw->dpmbase + addr); - else - memcpy_fromio(buf, hw->dpmbase + addr, len); - - return 0; -} - -/* Write Absolute Adapter Memory. - * Transfer data from data buffer to adapter's memory. */ -EXPORT_SYMBOL(cycx_poke); -int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - writeb(*(u8*)buf, hw->dpmbase + addr); - else - memcpy_toio(hw->dpmbase + addr, buf, len); - - return 0; -} - -/* Hardware-Specific Functions */ - -/* Load Aux Routines */ -/* Reset board hardware. - return 1 if memory exists at addr and 0 if not. */ -static int memory_exists(void __iomem *addr) -{ - int tries = 0; - - for (; tries < 3 ; tries++) { - writew(TEST_PATTERN, addr + 0x10); - - if (readw(addr + 0x10) == TEST_PATTERN) - if (readw(addr + 0x10) == TEST_PATTERN) - return 1; - - msleep_interruptible(1 * 1000); - } - - return 0; -} - -/* Load reset code. */ -static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - void __iomem *pt_code = addr + RESET_OFFSET; - u16 i; /*, j; */ - - for (i = 0 ; i < cnt ; i++) { -/* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */ - writeb(*buffer++, pt_code++); - } -} - -/* Load buffer using boot interface. - * o copy data from buffer to Cyclom-X memory - * o wait for reset code to copy it to right portion of memory */ -static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - memcpy_toio(addr + DATA_OFFSET, buffer, cnt); - writew(GEN_BOOT_DAT, addr + CMD_OFFSET); - - return wait_cyc(addr); -} - -/* Set up entry point and kick start Cyclom-X CPU. */ -static void cycx_start(void __iomem *addr) -{ - /* put in 0x30 offset the jump instruction to the code entry point */ - writeb(0xea, addr + 0x30); - writeb(0x00, addr + 0x31); - writeb(0xc4, addr + 0x32); - writeb(0x00, addr + 0x33); - writeb(0x00, addr + 0x34); - - /* cmd to start executing code */ - writew(GEN_START, addr + CMD_OFFSET); -} - -/* Load and boot reset code. */ -static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_start = addr + START_OFFSET; - - writeb(0xea, pt_start++); /* jmp to f000:3f00 */ - writeb(0x00, pt_start++); - writeb(0xfc, pt_start++); - writeb(0x00, pt_start++); - writeb(0xf0, pt_start); - reset_load(addr, code, len); - - /* 80186 was in hold, go */ - writeb(0, addr + START_CPU); - msleep_interruptible(1 * 1000); -} - -/* Load data.bin file through boot (reset) interface. */ -static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0, pt_boot_cmd + sizeof(u16)); - writew(0x4000, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - - -/* Load code.bin file through boot (reset) interface. */ -static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0x0000, pt_boot_cmd + sizeof(u16)); - writew(0xc400, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - -/* Load adapter from the memory image of the CYCX firmware module. - * o verify firmware integrity and compatibility - * o start adapter up */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) -{ - int i, j; - struct cycx_fw_header *img_hdr; - u8 *reset_image, - *data_image, - *code_image; - void __iomem *pt_cycld = hw->dpmbase + 0x400; - u16 cksum; - - /* Announce */ - pr_info("firmware signature=\"%s\"\n", cfm->signature); - - /* Verify firmware signature */ - if (strcmp(cfm->signature, CFM_SIGNATURE)) { - pr_err("load_cyc2x: not Cyclom-2X firmware!\n"); - return -EINVAL; - } - - pr_info("firmware version=%u\n", cfm->version); - - /* Verify firmware module format version */ - if (cfm->version != CFM_VERSION) { - pr_err("%s: firmware format %u rejected! Expecting %u.\n", - __func__, cfm->version, CFM_VERSION); - return -EINVAL; - } - - /* Verify firmware module length and checksum */ - cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) + - cfm->info.codesize); -/* - FIXME cfm->info.codesize is off by 2 - if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) || -*/ - if (cksum != cfm->checksum) { - pr_err("%s: firmware corrupted!\n", __func__); - pr_err(" cdsize = 0x%x (expected 0x%lx)\n", - len - (int)sizeof(struct cycx_firmware) - 1, - cfm->info.codesize); - pr_err(" chksum = 0x%x (expected 0x%x)\n", - cksum, cfm->checksum); - return -EINVAL; - } - - /* If everything is ok, set reset, data and code pointers */ - img_hdr = (struct cycx_fw_header *)&cfm->image; -#ifdef FIRMWARE_DEBUG - pr_info("%s: image sizes\n", __func__); - pr_info(" reset=%lu\n", img_hdr->reset_size); - pr_info(" data=%lu\n", img_hdr->data_size); - pr_info(" code=%lu\n", img_hdr->code_size); -#endif - reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header); - data_image = reset_image + img_hdr->reset_size; - code_image = data_image + img_hdr->data_size; - - /*---- Start load ----*/ - /* Announce */ - pr_info("loading firmware %s (ID=%u)...\n", - cfm->descr[0] ? cfm->descr : "unknown firmware", - cfm->info.codeid); - - for (i = 0 ; i < 5 ; i++) { - /* Reset Cyclom hardware */ - if (!reset_cyc2x(hw->dpmbase)) { - pr_err("dpm problem or board not found\n"); - return -EINVAL; - } - - /* Load reset.bin */ - cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size); - /* reset is waiting for boot */ - writew(GEN_POWER_ON, pt_cycld); - msleep_interruptible(1 * 1000); - - for (j = 0 ; j < 3 ; j++) - if (!readw(pt_cycld)) - goto reset_loaded; - else - msleep_interruptible(1 * 1000); - } - - pr_err("reset not started\n"); - return -EINVAL; - -reset_loaded: - /* Load data.bin */ - if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) { - pr_err("cannot load data file\n"); - return -EINVAL; - } - - /* Load code.bin */ - if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) { - pr_err("cannot load code file\n"); - return -EINVAL; - } - - /* Prepare boot-time configuration data */ - cycx_bootcfg(hw); - - /* kick-off CPU */ - cycx_start(hw->dpmbase); - - /* Arthur Ganzert's tip: wait a while after the firmware loading... - seg abr 26 17:17:12 EST 1999 - acme */ - msleep_interruptible(7 * 1000); - pr_info("firmware loaded!\n"); - - /* enable interrupts */ - cycx_inten(hw); - - return 0; -} - -/* Prepare boot-time firmware configuration data. - * o initialize configuration data area - From async.doc - V_3.4.0 - 07/18/1994 - - As of now, only static buffers are available to the user. - So, the bit VD_RXDIRC must be set in 'valid'. That means that user - wants to use the static transmission and reception buffers. */ -static void cycx_bootcfg(struct cycx_hw *hw) -{ - /* use fixed buffers */ - writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET); -} - -/* Detect Cyclom 2x adapter. - * Following tests are used to detect Cyclom 2x adapter: - * to be completed based on the tests done below - * Return 1 if detected o.k. or 0 if failed. - * Note: This test is destructive! Adapter will be left in shutdown - * state after the test. */ -static int detect_cyc2x(void __iomem *addr) -{ - reset_cyc2x(addr); - - return memory_exists(addr); -} - -/* Miscellaneous */ -/* Get option's index into the options list. - * Return option's index (1 .. N) or zero if option is invalid. */ -static int get_option_index(const long *optlist, long optval) -{ - int i = 1; - - for (; i <= optlist[0]; ++i) - if (optlist[i] == optval) - return i; - - return 0; -} - -/* Reset adapter's CPU. */ -static int reset_cyc2x(void __iomem *addr) -{ - writeb(0, addr + RST_ENABLE); - msleep_interruptible(2 * 1000); - writeb(0, addr + RST_DISABLE); - msleep_interruptible(2 * 1000); - - return memory_exists(addr); -} - -/* Calculate 16-bit CRC using CCITT polynomial. */ -static u16 checksum(u8 *buf, u32 len) -{ - u16 crc = 0; - u16 mask, flag; - - for (; len; --len, ++buf) - for (mask = 0x80; mask; mask >>= 1) { - flag = (crc & 0x8000); - crc <<= 1; - crc |= ((*buf & mask) ? 1 : 0); - - if (flag) - crc ^= 0x1021; - } - - return crc; -} - -module_init(cycx_drv_init); -module_exit(cycx_drv_cleanup); - -/* End */ diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c deleted file mode 100644 index 81fbbad406be..000000000000 --- a/drivers/net/wan/cycx_main.c +++ /dev/null @@ -1,346 +0,0 @@ -/* -* cycx_main.c Cyclades Cyclom 2X WAN Link Driver. Main module. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdlamain.c by Gene Kozin & -* Jaspreet Singh -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Please look at the bitkeeper changelog (or any other scm tool that ends up -* importing bitkeeper changelog or that replaces bitkeeper in the future as -* main tool for linux development). -* -* 2001/05/09 acme Fix MODULE_DESC for debug, .bss nitpicks, -* some cleanups -* 2000/07/13 acme remove useless #ifdef MODULE and crap -* #if KERNEL_VERSION > blah -* 2000/07/06 acme __exit at cyclomx_cleanup -* 2000/04/02 acme dprintk and cycx_debug -* module_init/module_exit -* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count -* and cyclomx_close to cyclomx_mod_dec_use_count -* 2000/01/08 acme cleanup -* 1999/11/06 acme cycx_down back to life (it needs to be -* called to iounmap the dpmbase) -* 1999/08/09 acme removed references to enable_tx_int -* use spinlocks instead of cli/sti in -* cyclomx_set_state -* 1999/05/19 acme works directly linked into the kernel -* init_waitqueue_head for 2.3.* kernel -* 1999/05/18 acme major cleanup (polling not needed), etc -* 1998/08/28 acme minor cleanup (ioctls for firmware deleted) -* queue_task activated -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include /* offsetof(), etc. */ -#include /* return codes */ -#include /* inline memset(), etc. */ -#include /* kmalloc(), kfree() */ -#include /* printk(), and other useful stuff */ -#include /* support for loadable modules */ -#include /* request_region(), release_region() */ -#include /* WAN router definitions */ -#include /* cyclomx common user API definitions */ -#include /* __init (when not using as a module) */ -#include - -unsigned int cycx_debug; - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver."); -MODULE_LICENSE("GPL"); -module_param(cycx_debug, int, 0); -MODULE_PARM_DESC(cycx_debug, "cyclomx debug level"); - -/* Defines & Macros */ - -#define CYCX_DRV_VERSION 0 /* version number */ -#define CYCX_DRV_RELEASE 11 /* release (minor version) number */ -#define CYCX_MAX_CARDS 1 /* max number of adapters */ - -#define CONFIG_CYCX_CARDS 1 - -/* Function Prototypes */ - -/* WAN link driver entry points */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf); -static int cycx_wan_shutdown(struct wan_device *wandev); - -/* Miscellaneous functions */ -static irqreturn_t cycx_isr(int irq, void *dev_id); - -/* Global Data - * Note: All data must be explicitly initialized!!! - */ - -/* private data */ -static const char cycx_drvname[] = "cyclomx"; -static const char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver"; -static const char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " - ""; -static int cycx_ncards = CONFIG_CYCX_CARDS; -static struct cycx_device *cycx_card_array; /* adapter data space */ - -/* Kernel Loadable Module Entry Points */ - -/* - * Module 'insert' entry point. - * o print announcement - * o allocate adapter data space - * o initialize static data - * o register all cards with WAN router - * o calibrate Cyclom 2X shared memory access delay. - * - * Return: 0 Ok - * < 0 error. - * Context: process - */ -static int __init cycx_init(void) -{ - int cnt, err = -ENOMEM; - - pr_info("%s v%u.%u %s\n", - cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE, - cycx_copyright); - - /* Verify number of cards and allocate adapter data space */ - cycx_ncards = min_t(int, cycx_ncards, CYCX_MAX_CARDS); - cycx_ncards = max_t(int, cycx_ncards, 1); - cycx_card_array = kcalloc(cycx_ncards, sizeof(struct cycx_device), GFP_KERNEL); - if (!cycx_card_array) - goto out; - - - /* Register adapters with WAN router */ - for (cnt = 0; cnt < cycx_ncards; ++cnt) { - struct cycx_device *card = &cycx_card_array[cnt]; - struct wan_device *wandev = &card->wandev; - - sprintf(card->devname, "%s%d", cycx_drvname, cnt + 1); - wandev->magic = ROUTER_MAGIC; - wandev->name = card->devname; - wandev->private = card; - wandev->setup = cycx_wan_setup; - wandev->shutdown = cycx_wan_shutdown; - err = register_wan_device(wandev); - - if (err) { - pr_err("%s registration failed with error %d!\n", - card->devname, err); - break; - } - } - - err = -ENODEV; - if (!cnt) { - kfree(cycx_card_array); - goto out; - } - err = 0; - cycx_ncards = cnt; /* adjust actual number of cards */ -out: return err; -} - -/* - * Module 'remove' entry point. - * o unregister all adapters from the WAN router - * o release all remaining system resources - */ -static void __exit cycx_exit(void) -{ - int i = 0; - - for (; i < cycx_ncards; ++i) { - struct cycx_device *card = &cycx_card_array[i]; - unregister_wan_device(card->devname); - } - - kfree(cycx_card_array); -} - -/* WAN Device Driver Entry Points */ -/* - * Setup/configure WAN link driver. - * o check adapter state - * o make sure firmware is present in configuration - * o allocate interrupt vector - * o setup Cyclom 2X hardware - * o call appropriate routine to perform protocol-specific initialization - * - * This function is called when router handles ROUTER_SETUP IOCTL. The - * configuration structure is in kernel memory (including extended data, if - * any). - */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf) -{ - int rc = -EFAULT; - struct cycx_device *card; - int irq; - - /* Sanity checks */ - - if (!wandev || !wandev->private || !conf) - goto out; - - card = wandev->private; - rc = -EBUSY; - if (wandev->state != WAN_UNCONFIGURED) - goto out; - - rc = -EINVAL; - if (!conf->data_size || !conf->data) { - pr_err("%s: firmware not found in configuration data!\n", - wandev->name); - goto out; - } - - if (conf->irq <= 0) { - pr_err("%s: can't configure without IRQ!\n", wandev->name); - goto out; - } - - /* Allocate IRQ */ - irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */ - - if (request_irq(irq, cycx_isr, 0, wandev->name, card)) { - pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq); - goto out; - } - - /* Configure hardware, load firmware, etc. */ - memset(&card->hw, 0, sizeof(card->hw)); - card->hw.irq = irq; - card->hw.dpmsize = CYCX_WINDOWSIZE; - card->hw.fwid = CFID_X25_2X; - spin_lock_init(&card->lock); - init_waitqueue_head(&card->wait_stats); - - rc = cycx_setup(&card->hw, conf->data, conf->data_size, conf->maddr); - if (rc) - goto out_irq; - - /* Initialize WAN device data space */ - wandev->irq = irq; - wandev->dma = wandev->ioport = 0; - wandev->maddr = (unsigned long)card->hw.dpmbase; - wandev->msize = card->hw.dpmsize; - wandev->hw_opt[2] = 0; - wandev->hw_opt[3] = card->hw.fwid; - - /* Protocol-specific initialization */ - switch (card->hw.fwid) { -#ifdef CONFIG_CYCLOMX_X25 - case CFID_X25_2X: - rc = cycx_x25_wan_init(card, conf); - break; -#endif - default: - pr_err("%s: this firmware is not supported!\n", wandev->name); - rc = -EINVAL; - } - - if (rc) { - cycx_down(&card->hw); - goto out_irq; - } - - rc = 0; -out: - return rc; -out_irq: - free_irq(irq, card); - goto out; -} - -/* - * Shut down WAN link driver. - * o shut down adapter hardware - * o release system resources. - * - * This function is called by the router when device is being unregistered or - * when it handles ROUTER_DOWN IOCTL. - */ -static int cycx_wan_shutdown(struct wan_device *wandev) -{ - int ret = -EFAULT; - struct cycx_device *card; - - /* sanity checks */ - if (!wandev || !wandev->private) - goto out; - - ret = 0; - if (wandev->state == WAN_UNCONFIGURED) - goto out; - - card = wandev->private; - wandev->state = WAN_UNCONFIGURED; - cycx_down(&card->hw); - pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq); - free_irq(wandev->irq, card); -out: return ret; -} - -/* Miscellaneous */ -/* - * Cyclom 2X Interrupt Service Routine. - * o acknowledge Cyclom 2X hardware interrupt. - * o call protocol-specific interrupt service routine, if any. - */ -static irqreturn_t cycx_isr(int irq, void *dev_id) -{ - struct cycx_device *card = dev_id; - - if (card->wandev.state == WAN_UNCONFIGURED) - goto out; - - if (card->in_isr) { - pr_warn("%s: interrupt re-entrancy on IRQ %d!\n", - card->devname, card->wandev.irq); - goto out; - } - - if (card->isr) - card->isr(card); - return IRQ_HANDLED; -out: - return IRQ_NONE; -} - -/* Set WAN device state. */ -void cycx_set_state(struct cycx_device *card, int state) -{ - unsigned long flags; - char *string_state = NULL; - - spin_lock_irqsave(&card->lock, flags); - - if (card->wandev.state != state) { - switch (state) { - case WAN_CONNECTED: - string_state = "connected!"; - break; - case WAN_DISCONNECTED: - string_state = "disconnected!"; - break; - } - pr_info("%s: link %s\n", card->devname, string_state); - card->wandev.state = state; - } - - card->state_tick = jiffies; - spin_unlock_irqrestore(&card->lock, flags); -} - -module_init(cycx_init); -module_exit(cycx_exit); diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c deleted file mode 100644 index 06f3f6309e4b..000000000000 --- a/drivers/net/wan/cycx_x25.c +++ /dev/null @@ -1,1602 +0,0 @@ -/* -* cycx_x25.c Cyclom 2X WAN Link Driver. X.25 module. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdla_x25.c by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 2001/01/12 acme use dev_kfree_skb_irq on interrupt context -* 2000/04/02 acme dprintk, cycx_debug -* fixed the bug introduced in get_dev_by_lcn and -* get_dev_by_dte_addr by the anonymous hacker -* that converted this driver to softnet -* 2000/01/08 acme cleanup -* 1999/10/27 acme use ARPHRD_HWX25 so that the X.25 stack know -* that we have a X.25 stack implemented in -* firmware onboard -* 1999/10/18 acme support for X.25 sockets in if_send, -* beware: socket(AF_X25...) IS WORK IN PROGRESS, -* TCP/IP over X.25 via wanrouter not affected, -* working. -* 1999/10/09 acme chan_disc renamed to chan_disconnect, -* began adding support for X.25 sockets: -* conf->protocol in new_if -* 1999/10/05 acme fixed return E... to return -E... -* 1999/08/10 acme serialized access to the card thru a spinlock -* in x25_exec -* 1999/08/09 acme removed per channel spinlocks -* removed references to enable_tx_int -* 1999/05/28 acme fixed nibble_to_byte, ackvc now properly treated -* if_send simplified -* 1999/05/25 acme fixed t1, t2, t21 & t23 configuration -* use spinlocks instead of cli/sti in some points -* 1999/05/24 acme finished the x25_get_stat function -* 1999/05/23 acme dev->type = ARPHRD_X25 (tcpdump only works, -* AFAIT, with ARPHRD_ETHER). This seems to be -* needed to use socket(AF_X25)... -* Now the config file must specify a peer media -* address for svc channels over a crossover cable. -* Removed hold_timeout from x25_channel_t, -* not used. -* A little enhancement in the DEBUG processing -* 1999/05/22 acme go to DISCONNECTED in disconnect_confirm_intr, -* instead of chan_disc. -* 1999/05/16 marcelo fixed timer initialization in SVCs -* 1999/01/05 acme x25_configure now get (most of) all -* parameters... -* 1999/01/05 acme pktlen now (correctly) uses log2 (value -* configured) -* 1999/01/03 acme judicious use of data types (u8, u16, u32, etc) -* 1999/01/03 acme cyx_isr: reset dpmbase to acknowledge -* indication (interrupt from cyclom 2x) -* 1999/01/02 acme cyx_isr: first hackings... -* 1999/01/0203 acme when initializing an array don't give less -* elements than declared... -* example: char send_cmd[6] = "?\xFF\x10"; -* you'll gonna lose a couple hours, 'cause your -* brain won't admit that there's an error in the -* above declaration... the side effect is that -* memset is put into the unresolved symbols -* instead of using the inline memset functions... -* 1999/01/02 acme began chan_connect, chan_send, x25_send -* 1998/12/31 acme x25_configure -* this code can be compiled as non module -* 1998/12/27 acme code cleanup -* IPX code wiped out! let's decrease code -* complexity for now, remember: I'm learning! :) -* bps_to_speed_code OK -* 1998/12/26 acme Minimal debug code cleanup -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define CYCLOMX_X25_DEBUG 1 - -#include /* isdigit() */ -#include /* return codes */ -#include /* ARPHRD_HWX25 */ -#include /* printk(), and other useful stuff */ -#include -#include /* inline memset(), etc. */ -#include -#include /* kmalloc(), kfree() */ -#include /* offsetof(), etc. */ -#include /* WAN router definitions */ - -#include /* htons(), etc. */ - -#include /* Cyclom 2X common user API definitions */ -#include /* X.25 firmware API definitions */ - -#include - -/* Defines & Macros */ -#define CYCX_X25_MAX_CMD_RETRY 5 -#define CYCX_X25_CHAN_MTU 2048 /* unfragmented logical channel MTU */ - -/* Data Structures */ -/* This is an extension of the 'struct net_device' we create for each network - interface to keep the rest of X.25 channel-specific data. */ -struct cycx_x25_channel { - /* This member must be first. */ - struct net_device *slave; /* WAN slave */ - - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char *local_addr; /* local media address, ASCIIZ - - svc thru crossover cable */ - s16 lcn; /* logical channel number/conn.req.key*/ - u8 link; - struct timer_list timer; /* timer used for svc channel disc. */ - u16 protocol; /* ethertype, 0 - multiplexed */ - u8 svc; /* 0 - permanent, 1 - switched */ - u8 state; /* channel state */ - u8 drop_sequence; /* mark sequence for dropping */ - u32 idle_tmout; /* sec, before disconnecting */ - struct sk_buff *rx_skb; /* receive socket buffer */ - struct cycx_device *card; /* -> owner */ - struct net_device_stats ifstats;/* interface statistics */ -}; - -/* Function Prototypes */ -/* WAN link driver entry points. These are called by the WAN router module. */ -static int cycx_wan_update(struct wan_device *wandev), - cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf), - cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev); - -/* Network device interface */ -static int cycx_netdevice_init(struct net_device *dev); -static int cycx_netdevice_open(struct net_device *dev); -static int cycx_netdevice_stop(struct net_device *dev); -static int cycx_netdevice_hard_header(struct sk_buff *skb, - struct net_device *dev, u16 type, - const void *daddr, const void *saddr, - unsigned len); -static int cycx_netdevice_rebuild_header(struct sk_buff *skb); -static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev); - -static struct net_device_stats * - cycx_netdevice_get_stats(struct net_device *dev); - -/* Interrupt handlers */ -static void cycx_x25_irq_handler(struct cycx_device *card), - cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd), - cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd), - cycx_x25_irq_log(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_stat(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_connect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_disconnect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_connect(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_disconnect(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_spurious(struct cycx_device *card, - struct cycx_x25_cmd *cmd); - -/* X.25 firmware interface functions */ -static int cycx_x25_configure(struct cycx_device *card, - struct cycx_x25_config *conf), - cycx_x25_get_stats(struct cycx_device *card), - cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm, - int len, void *buf), - cycx_x25_connect_response(struct cycx_device *card, - struct cycx_x25_channel *chan), - cycx_x25_disconnect_response(struct cycx_device *card, u8 link, - u8 lcn); - -/* channel functions */ -static int cycx_x25_chan_connect(struct net_device *dev), - cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb); - -static void cycx_x25_chan_disconnect(struct net_device *dev), - cycx_x25_chan_send_event(struct net_device *dev, u8 event); - -/* Miscellaneous functions */ -static void cycx_x25_set_chan_state(struct net_device *dev, u8 state), - cycx_x25_chan_timer(unsigned long d); - -static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble), - reset_timer(struct net_device *dev); - -static u8 bps_to_speed_code(u32 bps); -static u8 cycx_log2(u32 n); - -static unsigned dec_to_uint(u8 *str, int len); - -static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev, - s16 lcn); -static struct net_device * - cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte); - -static void cycx_x25_chan_setup(struct net_device *dev); - -#ifdef CYCLOMX_X25_DEBUG -static void hex_dump(char *msg, unsigned char *p, int len); -static void cycx_x25_dump_config(struct cycx_x25_config *conf); -static void cycx_x25_dump_stats(struct cycx_x25_stats *stats); -static void cycx_x25_dump_devs(struct wan_device *wandev); -#else -#define hex_dump(msg, p, len) -#define cycx_x25_dump_config(conf) -#define cycx_x25_dump_stats(stats) -#define cycx_x25_dump_devs(wandev) -#endif -/* Public Functions */ - -/* X.25 Protocol Initialization routine. - * - * This routine is called by the main Cyclom 2X module during setup. At this - * point adapter is completely initialized and X.25 firmware is running. - * o configure adapter - * o initialize protocol-specific fields of the adapter data space. - * - * Return: 0 o.k. - * < 0 failure. */ -int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf) -{ - struct cycx_x25_config cfg; - - /* Verify configuration ID */ - if (conf->config_id != WANCONFIG_X25) { - pr_info("%s: invalid configuration ID %u!\n", - card->devname, conf->config_id); - return -EINVAL; - } - - /* Initialize protocol-specific fields */ - card->mbox = card->hw.dpmbase + X25_MBOX_OFFS; - card->u.x.connection_keys = 0; - spin_lock_init(&card->u.x.lock); - - /* Configure adapter. Here we set reasonable defaults, then parse - * device configuration structure and set configuration options. - * Most configuration options are verified and corrected (if - * necessary) since we can't rely on the adapter to do so and don't - * want it to fail either. */ - memset(&cfg, 0, sizeof(cfg)); - cfg.link = 0; - cfg.clock = conf->clocking == WANOPT_EXTERNAL ? 8 : 55; - cfg.speed = bps_to_speed_code(conf->bps); - cfg.n3win = 7; - cfg.n2win = 2; - cfg.n2 = 5; - cfg.nvc = 1; - cfg.npvc = 1; - cfg.flags = 0x02; /* default = V35 */ - cfg.t1 = 10; /* line carrier timeout */ - cfg.t2 = 29; /* tx timeout */ - cfg.t21 = 180; /* CALL timeout */ - cfg.t23 = 180; /* CLEAR timeout */ - - /* adjust MTU */ - if (!conf->mtu || conf->mtu >= 512) - card->wandev.mtu = 512; - else if (conf->mtu >= 256) - card->wandev.mtu = 256; - else if (conf->mtu >= 128) - card->wandev.mtu = 128; - else - card->wandev.mtu = 64; - - cfg.pktlen = cycx_log2(card->wandev.mtu); - - if (conf->station == WANOPT_DTE) { - cfg.locaddr = 3; /* DTE */ - cfg.remaddr = 1; /* DCE */ - } else { - cfg.locaddr = 1; /* DCE */ - cfg.remaddr = 3; /* DTE */ - } - - if (conf->interface == WANOPT_RS232) - cfg.flags = 0; /* FIXME just reset the 2nd bit */ - - if (conf->u.x25.hi_pvc) { - card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, 4095); - card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc); - } - - if (conf->u.x25.hi_svc) { - card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, 4095); - card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc); - } - - if (card->u.x.lo_pvc == 255) - cfg.npvc = 0; - else - cfg.npvc = card->u.x.hi_pvc - card->u.x.lo_pvc + 1; - - cfg.nvc = card->u.x.hi_svc - card->u.x.lo_svc + 1 + cfg.npvc; - - if (conf->u.x25.hdlc_window) - cfg.n2win = min_t(unsigned int, conf->u.x25.hdlc_window, 7); - - if (conf->u.x25.pkt_window) - cfg.n3win = min_t(unsigned int, conf->u.x25.pkt_window, 7); - - if (conf->u.x25.t1) - cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30); - - if (conf->u.x25.t2) - cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 30); - - if (conf->u.x25.t11_t21) - cfg.t21 = min_t(unsigned int, conf->u.x25.t11_t21, 30); - - if (conf->u.x25.t13_t23) - cfg.t23 = min_t(unsigned int, conf->u.x25.t13_t23, 30); - - if (conf->u.x25.n2) - cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30); - - /* initialize adapter */ - if (cycx_x25_configure(card, &cfg)) - return -EIO; - - /* Initialize protocol-specific fields of adapter data space */ - card->wandev.bps = conf->bps; - card->wandev.interface = conf->interface; - card->wandev.clocking = conf->clocking; - card->wandev.station = conf->station; - card->isr = cycx_x25_irq_handler; - card->exec = NULL; - card->wandev.update = cycx_wan_update; - card->wandev.new_if = cycx_wan_new_if; - card->wandev.del_if = cycx_wan_del_if; - card->wandev.state = WAN_DISCONNECTED; - - return 0; -} - -/* WAN Device Driver Entry Points */ -/* Update device status & statistics. */ -static int cycx_wan_update(struct wan_device *wandev) -{ - /* sanity checks */ - if (!wandev || !wandev->private) - return -EFAULT; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - cycx_x25_get_stats(wandev->private); - - return 0; -} - -/* Create new logical channel. - * This routine is called by the router when ROUTER_IFNEW IOCTL is being - * handled. - * o parse media- and hardware-specific configuration - * o make sure that a new channel can be created - * o allocate resources, if necessary - * o prepare network device structure for registration. - * - * Return: 0 o.k. - * < 0 failure (channel will not be created) */ -static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf) -{ - struct cycx_device *card = wandev->private; - struct cycx_x25_channel *chan; - int err = 0; - - if (!conf->name[0] || strlen(conf->name) > WAN_IFNAME_SZ) { - pr_info("%s: invalid interface name!\n", card->devname); - return -EINVAL; - } - - dev = alloc_netdev(sizeof(struct cycx_x25_channel), conf->name, - cycx_x25_chan_setup); - if (!dev) - return -ENOMEM; - - chan = netdev_priv(dev); - strcpy(chan->name, conf->name); - chan->card = card; - chan->link = conf->port; - chan->protocol = conf->protocol ? ETH_P_X25 : ETH_P_IP; - chan->rx_skb = NULL; - /* only used in svc connected thru crossover cable */ - chan->local_addr = NULL; - - if (conf->addr[0] == '@') { /* SVC */ - int len = strlen(conf->local_addr); - - if (len) { - if (len > WAN_ADDRESS_SZ) { - pr_err("%s: %s local addr too long!\n", - wandev->name, chan->name); - err = -EINVAL; - goto error; - } else { - chan->local_addr = kmalloc(len + 1, GFP_KERNEL); - - if (!chan->local_addr) { - err = -ENOMEM; - goto error; - } - } - - strncpy(chan->local_addr, conf->local_addr, - WAN_ADDRESS_SZ); - } - - chan->svc = 1; - strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ); - init_timer(&chan->timer); - chan->timer.function = cycx_x25_chan_timer; - chan->timer.data = (unsigned long)dev; - - /* Set channel timeouts (default if not specified) */ - chan->idle_tmout = conf->idle_timeout ? conf->idle_timeout : 90; - } else if (isdigit(conf->addr[0])) { /* PVC */ - s16 lcn = dec_to_uint(conf->addr, 0); - - if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc) - chan->lcn = lcn; - else { - pr_err("%s: PVC %u is out of range on interface %s!\n", - wandev->name, lcn, chan->name); - err = -EINVAL; - goto error; - } - } else { - pr_err("%s: invalid media address on interface %s!\n", - wandev->name, chan->name); - err = -EINVAL; - goto error; - } - - return 0; - -error: - free_netdev(dev); - return err; -} - -/* Delete logical channel. */ -static int cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) { - kfree(chan->local_addr); - if (chan->state == WAN_CONNECTED) - del_timer(&chan->timer); - } - - return 0; -} - - -/* Network Device Interface */ - -static const struct header_ops cycx_header_ops = { - .create = cycx_netdevice_hard_header, - .rebuild = cycx_netdevice_rebuild_header, -}; - -static const struct net_device_ops cycx_netdev_ops = { - .ndo_init = cycx_netdevice_init, - .ndo_open = cycx_netdevice_open, - .ndo_stop = cycx_netdevice_stop, - .ndo_start_xmit = cycx_netdevice_hard_start_xmit, - .ndo_get_stats = cycx_netdevice_get_stats, -}; - -static void cycx_x25_chan_setup(struct net_device *dev) -{ - /* Initialize device driver entry points */ - dev->netdev_ops = &cycx_netdev_ops; - dev->header_ops = &cycx_header_ops; - - /* Initialize media-specific parameters */ - dev->mtu = CYCX_X25_CHAN_MTU; - dev->type = ARPHRD_HWX25; /* ARP h/w type */ - dev->hard_header_len = 0; /* media header length */ - dev->addr_len = 0; /* hardware address length */ -} - -/* Initialize Linux network interface. - * - * This routine is called only once for each interface, during Linux network - * interface registration. Returning anything but zero will fail interface - * registration. */ -static int cycx_netdevice_init(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - struct wan_device *wandev = &card->wandev; - - if (!chan->svc) - *(__be16*)dev->dev_addr = htons(chan->lcn); - - /* Initialize hardware parameters (just for reference) */ - dev->irq = wandev->irq; - dev->dma = wandev->dma; - dev->base_addr = wandev->ioport; - dev->mem_start = (unsigned long)wandev->maddr; - dev->mem_end = (unsigned long)(wandev->maddr + - wandev->msize - 1); - dev->flags |= IFF_NOARP; - - /* Set transmit buffer queue length */ - dev->tx_queue_len = 10; - - /* Initialize socket buffers */ - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); - - return 0; -} - -/* Open network interface. - * o prevent module from unloading by incrementing use count - * o if link is disconnected then initiate connection - * - * Return 0 if O.k. or errno. */ -static int cycx_netdevice_open(struct net_device *dev) -{ - if (netif_running(dev)) - return -EBUSY; /* only one open is allowed */ - - netif_start_queue(dev); - return 0; -} - -/* Close network interface. - * o reset flags. - * o if there's no more open channels then disconnect physical link. */ -static int cycx_netdevice_stop(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - netif_stop_queue(dev); - - if (chan->state == WAN_CONNECTED || chan->state == WAN_CONNECTING) - cycx_x25_chan_disconnect(dev); - - return 0; -} - -/* Build media header. - * o encapsulate packet according to encapsulation type. - * - * The trick here is to put packet type (Ethertype) into 'protocol' field of - * the socket buffer, so that we don't forget it. If encapsulation fails, - * set skb->protocol to 0 and discard packet later. - * - * Return: media header length. */ -static int cycx_netdevice_hard_header(struct sk_buff *skb, - struct net_device *dev, u16 type, - const void *daddr, const void *saddr, - unsigned len) -{ - skb->protocol = htons(type); - - return dev->hard_header_len; -} - -/* * Re-build media header. - * Return: 1 physical address resolved. - * 0 physical address not resolved */ -static int cycx_netdevice_rebuild_header(struct sk_buff *skb) -{ - return 1; -} - -/* Send a packet on a network interface. - * o set busy flag (marks start of the transmission). - * o check link state. If link is not up, then drop the packet. - * o check channel status. If it's down then initiate a call. - * o pass a packet to corresponding WAN device. - * o free socket buffer - * - * Return: 0 complete (socket buffer must be freed) - * non-0 packet may be re-transmitted (tbusy must be set) - * - * Notes: - * 1. This routine is called either by the protocol stack or by the "net - * bottom half" (with interrupts enabled). - * 2. Setting tbusy flag will inhibit further transmit requests from the - * protocol stack and can be used for flow control with protocol layer. */ -static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - - if (!chan->svc) - chan->protocol = ntohs(skb->protocol); - - if (card->wandev.state != WAN_CONNECTED) - ++chan->ifstats.tx_dropped; - else if (chan->svc && chan->protocol && - chan->protocol != ntohs(skb->protocol)) { - pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n", - card->devname, ntohs(skb->protocol), dev->name); - ++chan->ifstats.tx_errors; - } else if (chan->protocol == ETH_P_IP) { - switch (chan->state) { - case WAN_DISCONNECTED: - if (cycx_x25_chan_connect(dev)) { - netif_stop_queue(dev); - return NETDEV_TX_BUSY; - } - /* fall thru */ - case WAN_CONNECTED: - reset_timer(dev); - dev->trans_start = jiffies; - netif_stop_queue(dev); - - if (cycx_x25_chan_send(dev, skb)) - return NETDEV_TX_BUSY; - - break; - default: - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - } - } else { /* chan->protocol == ETH_P_X25 */ - switch (skb->data[0]) { - case X25_IFACE_DATA: - break; - case X25_IFACE_CONNECT: - cycx_x25_chan_connect(dev); - goto free_packet; - case X25_IFACE_DISCONNECT: - cycx_x25_chan_disconnect(dev); - goto free_packet; - default: - pr_info("%s: unknown %d x25-iface request on %s!\n", - card->devname, skb->data[0], dev->name); - ++chan->ifstats.tx_errors; - goto free_packet; - } - - skb_pull(skb, 1); /* Remove control byte */ - reset_timer(dev); - dev->trans_start = jiffies; - netif_stop_queue(dev); - - if (cycx_x25_chan_send(dev, skb)) { - /* prepare for future retransmissions */ - skb_push(skb, 1); - return NETDEV_TX_BUSY; - } - } - -free_packet: - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -/* Get Ethernet-style interface statistics. - * Return a pointer to struct net_device_stats */ -static struct net_device_stats *cycx_netdevice_get_stats(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - return chan ? &chan->ifstats : NULL; -} - -/* Interrupt Handlers */ -/* X.25 Interrupt Service Routine. */ -static void cycx_x25_irq_handler(struct cycx_device *card) -{ - struct cycx_x25_cmd cmd; - u16 z = 0; - - card->in_isr = 1; - card->buff_int_mode_unbusy = 0; - cycx_peek(&card->hw, X25_RXMBOX_OFFS, &cmd, sizeof(cmd)); - - switch (cmd.command) { - case X25_DATA_INDICATION: - cycx_x25_irq_rx(card, &cmd); - break; - case X25_ACK_FROM_VC: - cycx_x25_irq_tx(card, &cmd); - break; - case X25_LOG: - cycx_x25_irq_log(card, &cmd); - break; - case X25_STATISTIC: - cycx_x25_irq_stat(card, &cmd); - break; - case X25_CONNECT_CONFIRM: - cycx_x25_irq_connect_confirm(card, &cmd); - break; - case X25_CONNECT_INDICATION: - cycx_x25_irq_connect(card, &cmd); - break; - case X25_DISCONNECT_INDICATION: - cycx_x25_irq_disconnect(card, &cmd); - break; - case X25_DISCONNECT_CONFIRM: - cycx_x25_irq_disconnect_confirm(card, &cmd); - break; - case X25_LINE_ON: - cycx_set_state(card, WAN_CONNECTED); - break; - case X25_LINE_OFF: - cycx_set_state(card, WAN_DISCONNECTED); - break; - default: - cycx_x25_irq_spurious(card, &cmd); - break; - } - - cycx_poke(&card->hw, 0, &z, sizeof(z)); - cycx_poke(&card->hw, X25_RXMBOX_OFFS, &z, sizeof(z)); - card->in_isr = 0; -} - -/* Transmit interrupt handler. - * o Release socket buffer - * o Clear 'tbusy' flag */ -static void cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ - struct net_device *dev; - struct wan_device *wandev = &card->wandev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - - /* unbusy device and then dev_tint(); */ - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (dev) { - card->buff_int_mode_unbusy = 1; - netif_wake_queue(dev); - } else - pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn); -} - -/* Receive interrupt handler. - * This routine handles fragmented IP packets using M-bit according to the - * RFC1356. - * o map logical channel number to network interface. - * o allocate socket buffer or append received packet to the existing one. - * o if M-bit is reset (i.e. it's the last packet in a sequence) then - * decapsulate packet and pass socket buffer to the protocol stack. - * - * Notes: - * 1. When allocating a socket buffer, if M-bit is set then more data is - * coming and we have to allocate buffer for the maximum IP packet size - * expected on this channel. - * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no - * socket buffers available) the whole packet sequence must be discarded. */ -static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - struct cycx_x25_channel *chan; - struct sk_buff *skb; - u8 bitm, lcn; - int pktlen = cmd->len - 5; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 4, &bitm, sizeof(bitm)); - bitm &= 0x10; - - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s: receiving on orphaned LCN %d!\n", - card->devname, lcn); - return; - } - - chan = netdev_priv(dev); - reset_timer(dev); - - if (chan->drop_sequence) { - if (!bitm) - chan->drop_sequence = 0; - else - return; - } - - if ((skb = chan->rx_skb) == NULL) { - /* Allocate new socket buffer */ - int bufsize = bitm ? dev->mtu : pktlen; - - if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) + - bufsize + - dev->hard_header_len)) == NULL) { - pr_info("%s: no socket buffers available!\n", - card->devname); - chan->drop_sequence = 1; - ++chan->ifstats.rx_dropped; - return; - } - - if (chan->protocol == ETH_P_X25) /* X.25 socket layer control */ - /* 0 = data packet (dev_alloc_skb zeroed skb->data) */ - skb_put(skb, 1); - - skb->dev = dev; - skb->protocol = htons(chan->protocol); - chan->rx_skb = skb; - } - - if (skb_tailroom(skb) < pktlen) { - /* No room for the packet. Call off the whole thing! */ - dev_kfree_skb_irq(skb); - chan->rx_skb = NULL; - - if (bitm) - chan->drop_sequence = 1; - - pr_info("%s: unexpectedly long packet sequence on interface %s!\n", - card->devname, dev->name); - ++chan->ifstats.rx_length_errors; - return; - } - - /* Append packet to the socket buffer */ - cycx_peek(&card->hw, cmd->buf + 5, skb_put(skb, pktlen), pktlen); - - if (bitm) - return; /* more data is coming */ - - chan->rx_skb = NULL; /* dequeue packet */ - - ++chan->ifstats.rx_packets; - chan->ifstats.rx_bytes += pktlen; - - skb_reset_mac_header(skb); - netif_rx(skb); -} - -/* Connect interrupt handler. */ -static void cycx_x25_irq_connect(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev = NULL; - struct cycx_x25_channel *chan; - u8 d[32], - loc[24], - rem[24]; - u8 lcn, sizeloc, sizerem; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 5, &sizeloc, sizeof(sizeloc)); - cycx_peek(&card->hw, cmd->buf + 6, d, cmd->len - 6); - - sizerem = sizeloc >> 4; - sizeloc &= 0x0F; - - loc[0] = rem[0] = '\0'; - - if (sizeloc) - nibble_to_byte(d, loc, sizeloc, 0); - - if (sizerem) - nibble_to_byte(d + (sizeloc >> 1), rem, sizerem, sizeloc & 1); - - dprintk(1, KERN_INFO "%s:lcn=%d, local=%s, remote=%s\n", - __func__, lcn, loc, rem); - - dev = cycx_x25_get_dev_by_dte_addr(wandev, rem); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s: connect not expected: remote %s!\n", - card->devname, rem); - return; - } - - chan = netdev_priv(dev); - chan->lcn = lcn; - cycx_x25_connect_response(card, chan); - cycx_x25_set_chan_state(dev, WAN_CONNECTED); -} - -/* Connect confirm interrupt handler. */ -static void cycx_x25_irq_connect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - struct cycx_x25_channel *chan; - u8 lcn, key; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 1, &key, sizeof(key)); - dprintk(1, KERN_INFO "%s: %s:lcn=%d, key=%d\n", - card->devname, __func__, lcn, key); - - dev = cycx_x25_get_dev_by_lcn(wandev, -key); - if (!dev) { - /* Invalid channel, discard packet */ - clear_bit(--key, (void*)&card->u.x.connection_keys); - pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n", - card->devname, lcn, key); - return; - } - - clear_bit(--key, (void*)&card->u.x.connection_keys); - chan = netdev_priv(dev); - chan->lcn = lcn; - cycx_x25_set_chan_state(dev, WAN_CONNECTED); -} - -/* Disconnect confirm interrupt handler. */ -static void cycx_x25_irq_disconnect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - dprintk(1, KERN_INFO "%s: %s:lcn=%d\n", - card->devname, __func__, lcn); - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s:disconnect confirm not expected!:lcn %d\n", - card->devname, lcn); - return; - } - - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); -} - -/* disconnect interrupt handler. */ -static void cycx_x25_irq_disconnect(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - dprintk(1, KERN_INFO "%s:lcn=%d\n", __func__, lcn); - - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (dev) { - struct cycx_x25_channel *chan = netdev_priv(dev); - - cycx_x25_disconnect_response(card, chan->link, lcn); - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); - } else - cycx_x25_disconnect_response(card, 0, lcn); -} - -/* LOG interrupt handler. */ -static void cycx_x25_irq_log(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ -#if CYCLOMX_X25_DEBUG - char bf[20]; - u16 size, toread, link, msg_code; - u8 code, routine; - - cycx_peek(&card->hw, cmd->buf, &msg_code, sizeof(msg_code)); - cycx_peek(&card->hw, cmd->buf + 2, &link, sizeof(link)); - cycx_peek(&card->hw, cmd->buf + 4, &size, sizeof(size)); - /* at most 20 bytes are available... thanks to Daniela :) */ - toread = size < 20 ? size : 20; - cycx_peek(&card->hw, cmd->buf + 10, &bf, toread); - cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1); - cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1); - - pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n"); - pr_info("cmd->buf=0x%X\n", cmd->buf); - pr_info("Log message code=0x%X\n", msg_code); - pr_info("Link=%d\n", link); - pr_info("log code=0x%X\n", code); - pr_info("log routine=0x%X\n", routine); - pr_info("Message size=%d\n", size); - hex_dump("Message", bf, toread); -#endif -} - -/* STATISTIC interrupt handler. */ -static void cycx_x25_irq_stat(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - cycx_peek(&card->hw, cmd->buf, &card->u.x.stats, - sizeof(card->u.x.stats)); - hex_dump("cycx_x25_irq_stat", (unsigned char*)&card->u.x.stats, - sizeof(card->u.x.stats)); - cycx_x25_dump_stats(&card->u.x.stats); - wake_up_interruptible(&card->wait_stats); -} - -/* Spurious interrupt handler. - * o print a warning - * If number of spurious interrupts exceeded some limit, then ??? */ -static void cycx_x25_irq_spurious(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - pr_info("%s: spurious interrupt (0x%X)!\n", - card->devname, cmd->command); -} -#ifdef CYCLOMX_X25_DEBUG -static void hex_dump(char *msg, unsigned char *p, int len) -{ - print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1, - p, len, true); -} -#endif - -/* Cyclom 2X Firmware-Specific Functions */ -/* Exec X.25 command. */ -static int x25_exec(struct cycx_device *card, int command, int link, - void *d1, int len1, void *d2, int len2) -{ - struct cycx_x25_cmd c; - unsigned long flags; - u32 addr = 0x1200 + 0x2E0 * link + 0x1E2; - u8 retry = CYCX_X25_MAX_CMD_RETRY; - int err = 0; - - c.command = command; - c.link = link; - c.len = len1 + len2; - - spin_lock_irqsave(&card->u.x.lock, flags); - - /* write command */ - cycx_poke(&card->hw, X25_MBOX_OFFS, &c, sizeof(c) - sizeof(c.buf)); - - /* write X.25 data */ - if (d1) { - cycx_poke(&card->hw, addr, d1, len1); - - if (d2) { - if (len2 > 254) { - u32 addr1 = 0xA00 + 0x400 * link; - - cycx_poke(&card->hw, addr + len1, d2, 249); - cycx_poke(&card->hw, addr1, ((u8*)d2) + 249, - len2 - 249); - } else - cycx_poke(&card->hw, addr + len1, d2, len2); - } - } - - /* generate interruption, executing command */ - cycx_intr(&card->hw); - - /* wait till card->mbox == 0 */ - do { - err = cycx_exec(card->mbox); - } while (retry-- && err); - - spin_unlock_irqrestore(&card->u.x.lock, flags); - - return err; -} - -/* Configure adapter. */ -static int cycx_x25_configure(struct cycx_device *card, - struct cycx_x25_config *conf) -{ - struct { - u16 nlinks; - struct cycx_x25_config conf[2]; - } x25_cmd_conf; - - memset(&x25_cmd_conf, 0, sizeof(x25_cmd_conf)); - x25_cmd_conf.nlinks = 2; - x25_cmd_conf.conf[0] = *conf; - /* FIXME: we need to find a way in the wanrouter framework - to configure the second link, for now lets use it - with the same config from the first link, fixing - the interface type to RS232, the speed in 38400 and - the clock to external */ - x25_cmd_conf.conf[1] = *conf; - x25_cmd_conf.conf[1].link = 1; - x25_cmd_conf.conf[1].speed = 5; /* 38400 */ - x25_cmd_conf.conf[1].clock = 8; - x25_cmd_conf.conf[1].flags = 0; /* default = RS232 */ - - cycx_x25_dump_config(&x25_cmd_conf.conf[0]); - cycx_x25_dump_config(&x25_cmd_conf.conf[1]); - - return x25_exec(card, X25_CONFIG, 0, - &x25_cmd_conf, sizeof(x25_cmd_conf), NULL, 0); -} - -/* Get protocol statistics. */ -static int cycx_x25_get_stats(struct cycx_device *card) -{ - /* the firmware expects 20 in the size field!!! - thanks to Daniela */ - int err = x25_exec(card, X25_STATISTIC, 0, NULL, 20, NULL, 0); - - if (err) - return err; - - interruptible_sleep_on(&card->wait_stats); - - if (signal_pending(current)) - return -EINTR; - - card->wandev.stats.rx_packets = card->u.x.stats.n2_rx_frames; - card->wandev.stats.rx_over_errors = card->u.x.stats.rx_over_errors; - card->wandev.stats.rx_crc_errors = card->u.x.stats.rx_crc_errors; - card->wandev.stats.rx_length_errors = 0; /* not available from fw */ - card->wandev.stats.rx_frame_errors = 0; /* not available from fw */ - card->wandev.stats.rx_missed_errors = card->u.x.stats.rx_aborts; - card->wandev.stats.rx_dropped = 0; /* not available from fw */ - card->wandev.stats.rx_errors = 0; /* not available from fw */ - card->wandev.stats.tx_packets = card->u.x.stats.n2_tx_frames; - card->wandev.stats.tx_aborted_errors = card->u.x.stats.tx_aborts; - card->wandev.stats.tx_dropped = 0; /* not available from fw */ - card->wandev.stats.collisions = 0; /* not available from fw */ - card->wandev.stats.tx_errors = 0; /* not available from fw */ - - cycx_x25_dump_devs(&card->wandev); - - return 0; -} - -/* return the number of nibbles */ -static int byte_to_nibble(u8 *s, u8 *d, char *nibble) -{ - int i = 0; - - if (*nibble && *s) { - d[i] |= *s++ - '0'; - *nibble = 0; - ++i; - } - - while (*s) { - d[i] = (*s - '0') << 4; - if (*(s + 1)) - d[i] |= *(s + 1) - '0'; - else { - *nibble = 1; - break; - } - ++i; - s += 2; - } - - return i; -} - -static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble) -{ - if (nibble) { - *d++ = '0' + (*s++ & 0x0F); - --len; - } - - while (len) { - *d++ = '0' + (*s >> 4); - - if (--len) { - *d++ = '0' + (*s & 0x0F); - --len; - } else break; - - ++s; - } - - *d = '\0'; -} - -/* Place X.25 call. */ -static int x25_place_call(struct cycx_device *card, - struct cycx_x25_channel *chan) -{ - int err = 0, - len; - char d[64], - nibble = 0, - mylen = chan->local_addr ? strlen(chan->local_addr) : 0, - remotelen = strlen(chan->addr); - u8 key; - - if (card->u.x.connection_keys == ~0U) { - pr_info("%s: too many simultaneous connection requests!\n", - card->devname); - return -EAGAIN; - } - - key = ffz(card->u.x.connection_keys); - set_bit(key, (void*)&card->u.x.connection_keys); - ++key; - dprintk(1, KERN_INFO "%s:x25_place_call:key=%d\n", card->devname, key); - memset(d, 0, sizeof(d)); - d[1] = key; /* user key */ - d[2] = 0x10; - d[4] = 0x0B; - - len = byte_to_nibble(chan->addr, d + 6, &nibble); - - if (chan->local_addr) - len += byte_to_nibble(chan->local_addr, d + 6 + len, &nibble); - - if (nibble) - ++len; - - d[5] = mylen << 4 | remotelen; - d[6 + len + 1] = 0xCC; /* TCP/IP over X.25, thanks to Daniela :) */ - - if ((err = x25_exec(card, X25_CONNECT_REQUEST, chan->link, - &d, 7 + len + 1, NULL, 0)) != 0) - clear_bit(--key, (void*)&card->u.x.connection_keys); - else - chan->lcn = -key; - - return err; -} - -/* Place X.25 CONNECT RESPONSE. */ -static int cycx_x25_connect_response(struct cycx_device *card, - struct cycx_x25_channel *chan) -{ - u8 d[8]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = chan->lcn; - d[2] = 0x10; - d[4] = 0x0F; - d[7] = 0xCC; /* TCP/IP over X.25, thanks Daniela */ - - return x25_exec(card, X25_CONNECT_RESPONSE, chan->link, &d, 8, NULL, 0); -} - -/* Place X.25 DISCONNECT RESPONSE. */ -static int cycx_x25_disconnect_response(struct cycx_device *card, u8 link, - u8 lcn) -{ - char d[5]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = lcn; - d[2] = 0x10; - d[4] = 0x17; - - return x25_exec(card, X25_DISCONNECT_RESPONSE, link, &d, 5, NULL, 0); -} - -/* Clear X.25 call. */ -static int x25_clear_call(struct cycx_device *card, u8 link, u8 lcn, u8 cause, - u8 diagn) -{ - u8 d[7]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = lcn; - d[2] = 0x10; - d[4] = 0x13; - d[5] = cause; - d[6] = diagn; - - return x25_exec(card, X25_DISCONNECT_REQUEST, link, d, 7, NULL, 0); -} - -/* Send X.25 data packet. */ -static int cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm, - int len, void *buf) -{ - u8 d[] = "?\xFF\x10??"; - - d[0] = d[3] = lcn; - d[4] = bitm; - - return x25_exec(card, X25_DATA_REQUEST, link, &d, 5, buf, len); -} - -/* Miscellaneous */ -/* Find network device by its channel number. */ -static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev, - s16 lcn) -{ - struct net_device *dev = wandev->dev; - struct cycx_x25_channel *chan; - - while (dev) { - chan = netdev_priv(dev); - - if (chan->lcn == lcn) - break; - dev = chan->slave; - } - return dev; -} - -/* Find network device by its remote dte address. */ -static struct net_device * - cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte) -{ - struct net_device *dev = wandev->dev; - struct cycx_x25_channel *chan; - - while (dev) { - chan = netdev_priv(dev); - - if (!strcmp(chan->addr, dte)) - break; - dev = chan->slave; - } - return dev; -} - -/* Initiate connection on the logical channel. - * o for PVC we just get channel configuration - * o for SVCs place an X.25 call - * - * Return: 0 connected - * >0 connection in progress - * <0 failure */ -static int cycx_x25_chan_connect(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - - if (chan->svc) { - if (!chan->addr[0]) - return -EINVAL; /* no destination address */ - - dprintk(1, KERN_INFO "%s: placing X.25 call to %s...\n", - card->devname, chan->addr); - - if (x25_place_call(card, chan)) - return -EIO; - - cycx_x25_set_chan_state(dev, WAN_CONNECTING); - return 1; - } else - cycx_x25_set_chan_state(dev, WAN_CONNECTED); - - return 0; -} - -/* Disconnect logical channel. - * o if SVC then clear X.25 call */ -static void cycx_x25_chan_disconnect(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) { - x25_clear_call(chan->card, chan->link, chan->lcn, 0, 0); - cycx_x25_set_chan_state(dev, WAN_DISCONNECTING); - } else - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); -} - -/* Called by kernel timer */ -static void cycx_x25_chan_timer(unsigned long d) -{ - struct net_device *dev = (struct net_device *)d; - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->state == WAN_CONNECTED) - cycx_x25_chan_disconnect(dev); - else - pr_err("%s: %s for svc (%s) not connected!\n", - chan->card->devname, __func__, dev->name); -} - -/* Set logical channel state. */ -static void cycx_x25_set_chan_state(struct net_device *dev, u8 state) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - unsigned long flags; - char *string_state = NULL; - - spin_lock_irqsave(&card->lock, flags); - - if (chan->state != state) { - if (chan->svc && chan->state == WAN_CONNECTED) - del_timer(&chan->timer); - - switch (state) { - case WAN_CONNECTED: - string_state = "connected!"; - *(__be16*)dev->dev_addr = htons(chan->lcn); - netif_wake_queue(dev); - reset_timer(dev); - - if (chan->protocol == ETH_P_X25) - cycx_x25_chan_send_event(dev, - X25_IFACE_CONNECT); - - break; - case WAN_CONNECTING: - string_state = "connecting..."; - break; - case WAN_DISCONNECTING: - string_state = "disconnecting..."; - break; - case WAN_DISCONNECTED: - string_state = "disconnected!"; - - if (chan->svc) { - *(unsigned short*)dev->dev_addr = 0; - chan->lcn = 0; - } - - if (chan->protocol == ETH_P_X25) - cycx_x25_chan_send_event(dev, - X25_IFACE_DISCONNECT); - - netif_wake_queue(dev); - break; - } - - pr_info("%s: interface %s %s\n", - card->devname, dev->name, string_state); - chan->state = state; - } - - spin_unlock_irqrestore(&card->lock, flags); -} - -/* Send packet on a logical channel. - * When this function is called, tx_skb field of the channel data space - * points to the transmit socket buffer. When transmission is complete, - * release socket buffer and reset 'tbusy' flag. - * - * Return: 0 - transmission complete - * 1 - busy - * - * Notes: - * 1. If packet length is greater than MTU for this channel, we'll fragment - * the packet into 'complete sequence' using M-bit. - * 2. When transmission is complete, an event notification should be issued - * to the router. */ -static int cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - int bitm = 0; /* final packet */ - unsigned len = skb->len; - - if (skb->len > card->wandev.mtu) { - len = card->wandev.mtu; - bitm = 0x10; /* set M-bit (more data) */ - } - - if (cycx_x25_send(card, chan->link, chan->lcn, bitm, len, skb->data)) - return 1; - - if (bitm) { - skb_pull(skb, len); - return 1; - } - - ++chan->ifstats.tx_packets; - chan->ifstats.tx_bytes += len; - - return 0; -} - -/* Send event (connection, disconnection, etc) to X.25 socket layer */ - -static void cycx_x25_chan_send_event(struct net_device *dev, u8 event) -{ - struct sk_buff *skb; - unsigned char *ptr; - - if ((skb = dev_alloc_skb(1)) == NULL) { - pr_err("%s: out of memory\n", __func__); - return; - } - - ptr = skb_put(skb, 1); - *ptr = event; - - skb->protocol = x25_type_trans(skb, dev); - netif_rx(skb); -} - -/* Convert line speed in bps to a number used by cyclom 2x code. */ -static u8 bps_to_speed_code(u32 bps) -{ - u8 number = 0; /* defaults to the lowest (1200) speed ;> */ - - if (bps >= 512000) number = 8; - else if (bps >= 256000) number = 7; - else if (bps >= 64000) number = 6; - else if (bps >= 38400) number = 5; - else if (bps >= 19200) number = 4; - else if (bps >= 9600) number = 3; - else if (bps >= 4800) number = 2; - else if (bps >= 2400) number = 1; - - return number; -} - -/* log base 2 */ -static u8 cycx_log2(u32 n) -{ - u8 log = 0; - - if (!n) - return 0; - - while (n > 1) { - n >>= 1; - ++log; - } - - return log; -} - -/* Convert decimal string to unsigned integer. - * If len != 0 then only 'len' characters of the string are converted. */ -static unsigned dec_to_uint(u8 *str, int len) -{ - unsigned val = 0; - - if (!len) - len = strlen(str); - - for (; len && isdigit(*str); ++str, --len) - val = (val * 10) + (*str - (unsigned) '0'); - - return val; -} - -static void reset_timer(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) - mod_timer(&chan->timer, jiffies+chan->idle_tmout*HZ); -} -#ifdef CYCLOMX_X25_DEBUG -static void cycx_x25_dump_config(struct cycx_x25_config *conf) -{ - pr_info("X.25 configuration\n"); - pr_info("-----------------\n"); - pr_info("link number=%d\n", conf->link); - pr_info("line speed=%d\n", conf->speed); - pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In"); - pr_info("# level 2 retransm.=%d\n", conf->n2); - pr_info("level 2 window=%d\n", conf->n2win); - pr_info("level 3 window=%d\n", conf->n3win); - pr_info("# logical channels=%d\n", conf->nvc); - pr_info("level 3 pkt len=%d\n", conf->pktlen); - pr_info("my address=%d\n", conf->locaddr); - pr_info("remote address=%d\n", conf->remaddr); - pr_info("t1=%d seconds\n", conf->t1); - pr_info("t2=%d seconds\n", conf->t2); - pr_info("t21=%d seconds\n", conf->t21); - pr_info("# PVCs=%d\n", conf->npvc); - pr_info("t23=%d seconds\n", conf->t23); - pr_info("flags=0x%x\n", conf->flags); -} - -static void cycx_x25_dump_stats(struct cycx_x25_stats *stats) -{ - pr_info("X.25 statistics\n"); - pr_info("--------------\n"); - pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors); - pr_info("rx_over_errors=%d\n", stats->rx_over_errors); - pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames); - pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames); - pr_info("tx_timeouts=%d\n", stats->tx_timeouts); - pr_info("rx_timeouts=%d\n", stats->rx_timeouts); - pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets); - pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets); - pr_info("tx_aborts=%d\n", stats->tx_aborts); - pr_info("rx_aborts=%d\n", stats->rx_aborts); -} - -static void cycx_x25_dump_devs(struct wan_device *wandev) -{ - struct net_device *dev = wandev->dev; - - pr_info("X.25 dev states\n"); - pr_info("name: addr: txoff: protocol:\n"); - pr_info("---------------------------------------\n"); - - while(dev) { - struct cycx_x25_channel *chan = netdev_priv(dev); - - pr_info("%-5.5s %-15.15s %d ETH_P_%s\n", - chan->name, chan->addr, netif_queue_stopped(dev), - chan->protocol == ETH_P_IP ? "IP" : "X25"); - dev = chan->slave; - } -} - -#endif /* CYCLOMX_X25_DEBUG */ -/* End */ -- cgit v1.2.3