From c659c38b2796578638548b77ef626d93609ec8ac Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Fri, 21 Jan 2011 10:59:30 +0000 Subject: tlan: Code cleanup: checkpatch.pl is relatively happy now. - Remove CamelCase. - Convert hexadecimals to lower case. - Remove useless comments. Tlan driver contained a name of the function at the end of it in a comment. Remove those comments. - Remove local typedefs. Use real types instead of typedefs in code. - Resolve space issues and reindent. - One warning remain, it's a case where printing a single line involves a number of printk()s. Signed-off-by: Sakari Ailus Signed-off-by: David S. Miller --- drivers/net/tlan.c | 3703 ++++++++++++++++++++++++++-------------------------- 1 file changed, 1869 insertions(+), 1834 deletions(-) (limited to 'drivers/net/tlan.c') diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index f8e463cd8ecc..57380b1b3b60 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -63,45 +63,45 @@ * - Other minor stuff * * v1.4 Feb 10, 2000 - Updated with more changes required after Dave's - * network cleanup in 2.3.43pre7 (Tigran & myself) - * - Minor stuff. + * network cleanup in 2.3.43pre7 (Tigran & myself) + * - Minor stuff. * - * v1.5 March 22, 2000 - Fixed another timer bug that would hang the driver - * if no cable/link were present. + * v1.5 March 22, 2000 - Fixed another timer bug that would hang the + * driver if no cable/link were present. * - Cosmetic changes. * - TODO: Port completely to new PCI/DMA API - * Auto-Neg fallback. - * - * v1.6 April 04, 2000 - Fixed driver support for kernel-parameters. Haven't - * tested it though, as the kernel support is currently - * broken (2.3.99p4p3). - * - Updated tlan.txt accordingly. - * - Adjusted minimum/maximum frame length. - * - There is now a TLAN website up at - * http://hp.sourceforge.net/ - * - * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now - * reports PHY information when used with Donald - * Beckers userspace MII diagnostics utility. - * - * v1.8 April 23, 2000 - Fixed support for forced speed/duplex settings. - * - Added link information to Auto-Neg and forced - * modes. When NIC operates with auto-neg the driver - * will report Link speed & duplex modes as well as - * link partner abilities. When forced link is used, - * the driver will report status of the established - * link. - * Please read tlan.txt for additional information. - * - Removed call to check_region(), and used - * return value of request_region() instead. + * Auto-Neg fallback. + * + * v1.6 April 04, 2000 - Fixed driver support for kernel-parameters. + * Haven't tested it though, as the kernel support + * is currently broken (2.3.99p4p3). + * - Updated tlan.txt accordingly. + * - Adjusted minimum/maximum frame length. + * - There is now a TLAN website up at + * http://hp.sourceforge.net/ + * + * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now + * reports PHY information when used with Donald + * Beckers userspace MII diagnostics utility. + * + * v1.8 April 23, 2000 - Fixed support for forced speed/duplex settings. + * - Added link information to Auto-Neg and forced + * modes. When NIC operates with auto-neg the driver + * will report Link speed & duplex modes as well as + * link partner abilities. When forced link is used, + * the driver will report status of the established + * link. + * Please read tlan.txt for additional information. + * - Removed call to check_region(), and used + * return value of request_region() instead. * * v1.8a May 28, 2000 - Minor updates. * * v1.9 July 25, 2000 - Fixed a few remaining Full-Duplex issues. - * - Updated with timer fixes from Andrew Morton. - * - Fixed module race in TLan_Open. - * - Added routine to monitor PHY status. - * - Added activity led support for Proliant devices. + * - Updated with timer fixes from Andrew Morton. + * - Fixed module race in TLan_Open. + * - Added routine to monitor PHY status. + * - Added activity led support for Proliant devices. * * v1.10 Aug 30, 2000 - Added support for EISA based tlan controllers * like the Compaq NetFlex3/E. @@ -111,8 +111,8 @@ * hardware probe is done with kernel API and * TLan_EisaProbe. * - Adjusted debug information for probing. - * - Fixed bug that would cause general debug information - * to be printed after driver removal. + * - Fixed bug that would cause general debug + * information to be printed after driver removal. * - Added transmit timeout handling. * - Fixed OOM return values in tlan_probe. * - Fixed possible mem leak in tlan_exit @@ -136,8 +136,8 @@ * * v1.12 Oct 12, 2000 - Minor fixes (memleak, init, etc.) * - * v1.13 Nov 28, 2000 - Stop flooding console with auto-neg issues - * when link can't be established. + * v1.13 Nov 28, 2000 - Stop flooding console with auto-neg issues + * when link can't be established. * - Added the bbuf option as a kernel parameter. * - Fixed ioaddr probe bug. * - Fixed stupid deadlock with MII interrupts. @@ -147,28 +147,29 @@ * TLAN v1.0 silicon. This needs to be investigated * further. * - * v1.14 Dec 16, 2000 - Added support for servicing multiple frames per. - * interrupt. Thanks goes to - * Adam Keys - * Denis Beaudoin - * for providing the patch. - * - Fixed auto-neg output when using multiple - * adapters. - * - Converted to use new taskq interface. + * v1.14 Dec 16, 2000 - Added support for servicing multiple frames per. + * interrupt. Thanks goes to + * Adam Keys + * Denis Beaudoin + * for providing the patch. + * - Fixed auto-neg output when using multiple + * adapters. + * - Converted to use new taskq interface. * - * v1.14a Jan 6, 2001 - Minor adjustments (spinlocks, etc.) + * v1.14a Jan 6, 2001 - Minor adjustments (spinlocks, etc.) * * Samuel Chessman New Maintainer! * * v1.15 Apr 4, 2002 - Correct operation when aui=1 to be - * 10T half duplex no loopback - * Thanks to Gunnar Eikman + * 10T half duplex no loopback + * Thanks to Gunnar Eikman * * Sakari Ailus : * * v1.15a Dec 15 2008 - Remove bbuf support, it doesn't work anyway. + * v1.16 Jan 6 2011 - Make checkpatch.pl happy. * - *******************************************************************************/ + ******************************************************************************/ #include #include @@ -185,13 +186,11 @@ #include "tlan.h" -typedef u32 (TLanIntVectorFunc)( struct net_device *, u16 ); - /* For removing EISA devices */ -static struct net_device *TLan_Eisa_Devices; +static struct net_device *tlan_eisa_devices; -static int TLanDevicesInstalled; +static int tlan_devices_installed; /* Set speed, duplex and aui settings */ static int aui[MAX_TLAN_BOARDS]; @@ -202,7 +201,8 @@ module_param_array(aui, int, NULL, 0); module_param_array(duplex, int, NULL, 0); module_param_array(speed, int, NULL, 0); MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)"); -MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)"); +MODULE_PARM_DESC(duplex, + "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)"); MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)"); MODULE_AUTHOR("Maintainer: Samuel Chessman "); @@ -218,139 +218,144 @@ static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "ThunderLAN debug mask"); -static const char TLanSignature[] = "TLAN"; -static const char tlan_banner[] = "ThunderLAN driver v1.15a\n"; +static const char tlan_signature[] = "TLAN"; +static const char tlan_banner[] = "ThunderLAN driver v1.16\n"; static int tlan_have_pci; static int tlan_have_eisa; -static const char *media[] = { - "10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ", - "100baseTx-FD", "100baseT4", NULL +static const char * const media[] = { + "10BaseT-HD", "10BaseT-FD", "100baseTx-HD", + "100BaseTx-FD", "100BaseT4", NULL }; static struct board { - const char *deviceLabel; - u32 flags; - u16 addrOfs; + const char *device_label; + u32 flags; + u16 addr_ofs; } board_info[] = { { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, - { "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, + { "Compaq Netelligent 10/100 TX PCI UTP", + TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 }, { "Compaq NetFlex-3/P", TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 }, { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 }, { "Compaq Netelligent Integrated 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, - { "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 }, - { "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 }, + { "Compaq Netelligent Dual 10/100 TX PCI UTP", + TLAN_ADAPTER_NONE, 0x83 }, + { "Compaq Netelligent 10/100 TX Embedded UTP", + TLAN_ADAPTER_NONE, 0x83 }, { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 }, - { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 }, - { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 }, + { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xf8 }, + { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xf8 }, { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, - { "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 }, + { "Compaq Netelligent 10 T/2 PCI UTP/coax", TLAN_ADAPTER_NONE, 0x83 }, { "Compaq NetFlex-3/E", - TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */ + TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */ TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 }, - { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */ + { "Compaq NetFlex-3/E", + TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */ }; static DEFINE_PCI_DEVICE_TABLE(tlan_pci_tbl) = { { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 }, { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 }, { 0,} }; MODULE_DEVICE_TABLE(pci, tlan_pci_tbl); -static void TLan_EisaProbe( void ); -static void TLan_Eisa_Cleanup( void ); -static int TLan_Init( struct net_device * ); -static int TLan_Open( struct net_device *dev ); -static netdev_tx_t TLan_StartTx( struct sk_buff *, struct net_device *); -static irqreturn_t TLan_HandleInterrupt( int, void *); -static int TLan_Close( struct net_device *); -static struct net_device_stats *TLan_GetStats( struct net_device *); -static void TLan_SetMulticastList( struct net_device *); -static int TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd); -static int TLan_probe1( struct pci_dev *pdev, long ioaddr, - int irq, int rev, const struct pci_device_id *ent); -static void TLan_tx_timeout( struct net_device *dev); -static void TLan_tx_timeout_work(struct work_struct *work); -static int tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent); - -static u32 TLan_HandleTxEOF( struct net_device *, u16 ); -static u32 TLan_HandleStatOverflow( struct net_device *, u16 ); -static u32 TLan_HandleRxEOF( struct net_device *, u16 ); -static u32 TLan_HandleDummy( struct net_device *, u16 ); -static u32 TLan_HandleTxEOC( struct net_device *, u16 ); -static u32 TLan_HandleStatusCheck( struct net_device *, u16 ); -static u32 TLan_HandleRxEOC( struct net_device *, u16 ); - -static void TLan_Timer( unsigned long ); - -static void TLan_ResetLists( struct net_device * ); -static void TLan_FreeLists( struct net_device * ); -static void TLan_PrintDio( u16 ); -static void TLan_PrintList( TLanList *, char *, int ); -static void TLan_ReadAndClearStats( struct net_device *, int ); -static void TLan_ResetAdapter( struct net_device * ); -static void TLan_FinishReset( struct net_device * ); -static void TLan_SetMac( struct net_device *, int areg, char *mac ); - -static void TLan_PhyPrint( struct net_device * ); -static void TLan_PhyDetect( struct net_device * ); -static void TLan_PhyPowerDown( struct net_device * ); -static void TLan_PhyPowerUp( struct net_device * ); -static void TLan_PhyReset( struct net_device * ); -static void TLan_PhyStartLink( struct net_device * ); -static void TLan_PhyFinishAutoNeg( struct net_device * ); +static void tlan_eisa_probe(void); +static void tlan_eisa_cleanup(void); +static int tlan_init(struct net_device *); +static int tlan_open(struct net_device *dev); +static netdev_tx_t tlan_start_tx(struct sk_buff *, struct net_device *); +static irqreturn_t tlan_handle_interrupt(int, void *); +static int tlan_close(struct net_device *); +static struct net_device_stats *tlan_get_stats(struct net_device *); +static void tlan_set_multicast_list(struct net_device *); +static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int tlan_probe1(struct pci_dev *pdev, long ioaddr, + int irq, int rev, const struct pci_device_id *ent); +static void tlan_tx_timeout(struct net_device *dev); +static void tlan_tx_timeout_work(struct work_struct *work); +static int tlan_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); + +static u32 tlan_handle_tx_eof(struct net_device *, u16); +static u32 tlan_handle_stat_overflow(struct net_device *, u16); +static u32 tlan_handle_rx_eof(struct net_device *, u16); +static u32 tlan_handle_dummy(struct net_device *, u16); +static u32 tlan_handle_tx_eoc(struct net_device *, u16); +static u32 tlan_handle_status_check(struct net_device *, u16); +static u32 tlan_handle_rx_eoc(struct net_device *, u16); + +static void tlan_timer(unsigned long); + +static void tlan_reset_lists(struct net_device *); +static void tlan_free_lists(struct net_device *); +static void tlan_print_dio(u16); +static void tlan_print_list(struct tlan_list *, char *, int); +static void tlan_read_and_clear_stats(struct net_device *, int); +static void tlan_reset_adapter(struct net_device *); +static void tlan_finish_reset(struct net_device *); +static void tlan_set_mac(struct net_device *, int areg, char *mac); + +static void tlan_phy_print(struct net_device *); +static void tlan_phy_detect(struct net_device *); +static void tlan_phy_power_down(struct net_device *); +static void tlan_phy_power_up(struct net_device *); +static void tlan_phy_reset(struct net_device *); +static void tlan_phy_start_link(struct net_device *); +static void tlan_phy_finish_auto_neg(struct net_device *); #ifdef MONITOR -static void TLan_PhyMonitor( struct net_device * ); +static void tlan_phy_monitor(struct net_device *); #endif /* -static int TLan_PhyNop( struct net_device * ); -static int TLan_PhyInternalCheck( struct net_device * ); -static int TLan_PhyInternalService( struct net_device * ); -static int TLan_PhyDp83840aCheck( struct net_device * ); + static int tlan_phy_nop(struct net_device *); + static int tlan_phy_internal_check(struct net_device *); + static int tlan_phy_internal_service(struct net_device *); + static int tlan_phy_dp83840a_check(struct net_device *); */ -static bool TLan_MiiReadReg( struct net_device *, u16, u16, u16 * ); -static void TLan_MiiSendData( u16, u32, unsigned ); -static void TLan_MiiSync( u16 ); -static void TLan_MiiWriteReg( struct net_device *, u16, u16, u16 ); +static bool tlan_mii_read_reg(struct net_device *, u16, u16, u16 *); +static void tlan_mii_send_data(u16, u32, unsigned); +static void tlan_mii_sync(u16); +static void tlan_mii_write_reg(struct net_device *, u16, u16, u16); -static void TLan_EeSendStart( u16 ); -static int TLan_EeSendByte( u16, u8, int ); -static void TLan_EeReceiveByte( u16, u8 *, int ); -static int TLan_EeReadByte( struct net_device *, u8, u8 * ); +static void tlan_ee_send_start(u16); +static int tlan_ee_send_byte(u16, u8, int); +static void tlan_ee_receive_byte(u16, u8 *, int); +static int tlan_ee_read_byte(struct net_device *, u8, u8 *); static inline void -TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb) +tlan_store_skb(struct tlan_list *tag, struct sk_buff *skb) { unsigned long addr = (unsigned long)skb; tag->buffer[9].address = addr; @@ -358,7 +363,7 @@ TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb) } static inline struct sk_buff * -TLan_GetSKB( const struct tlan_list_tag *tag) +tlan_get_skb(const struct tlan_list *tag) { unsigned long addr; @@ -367,50 +372,50 @@ TLan_GetSKB( const struct tlan_list_tag *tag) return (struct sk_buff *) addr; } - -static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = { +static u32 +(*tlan_int_vector[TLAN_INT_NUMBER_OF_INTS])(struct net_device *, u16) = { NULL, - TLan_HandleTxEOF, - TLan_HandleStatOverflow, - TLan_HandleRxEOF, - TLan_HandleDummy, - TLan_HandleTxEOC, - TLan_HandleStatusCheck, - TLan_HandleRxEOC + tlan_handle_tx_eof, + tlan_handle_stat_overflow, + tlan_handle_rx_eof, + tlan_handle_dummy, + tlan_handle_tx_eoc, + tlan_handle_status_check, + tlan_handle_rx_eoc }; static inline void -TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type ) +tlan_set_timer(struct net_device *dev, u32 ticks, u32 type) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); unsigned long flags = 0; if (!in_irq()) spin_lock_irqsave(&priv->lock, flags); - if ( priv->timer.function != NULL && - priv->timerType != TLAN_TIMER_ACTIVITY ) { + if (priv->timer.function != NULL && + priv->timer_type != TLAN_TIMER_ACTIVITY) { if (!in_irq()) spin_unlock_irqrestore(&priv->lock, flags); return; } - priv->timer.function = TLan_Timer; + priv->timer.function = tlan_timer; if (!in_irq()) spin_unlock_irqrestore(&priv->lock, flags); priv->timer.data = (unsigned long) dev; - priv->timerSetAt = jiffies; - priv->timerType = type; + priv->timer_set_at = jiffies; + priv->timer_type = type; mod_timer(&priv->timer, jiffies + ticks); -} /* TLan_SetTimer */ +} /***************************************************************************** ****************************************************************************** - ThunderLAN Driver Primary Functions +ThunderLAN driver primary functions - These functions are more or less common to all Linux network drivers. +these functions are more or less common to all linux network drivers. ****************************************************************************** *****************************************************************************/ @@ -419,42 +424,42 @@ TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type ) - /*************************************************************** - * tlan_remove_one - * - * Returns: - * Nothing - * Parms: - * None - * - * Goes through the TLanDevices list and frees the device - * structs and memory associated with each device (lists - * and buffers). It also ureserves the IO port regions - * associated with this device. - * - **************************************************************/ +/*************************************************************** + * tlan_remove_one + * + * Returns: + * Nothing + * Parms: + * None + * + * Goes through the TLanDevices list and frees the device + * structs and memory associated with each device (lists + * and buffers). It also ureserves the IO port regions + * associated with this device. + * + **************************************************************/ -static void __devexit tlan_remove_one( struct pci_dev *pdev) +static void __devexit tlan_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata( pdev ); - TLanPrivateInfo *priv = netdev_priv(dev); + struct net_device *dev = pci_get_drvdata(pdev); + struct tlan_priv *priv = netdev_priv(dev); - unregister_netdev( dev ); + unregister_netdev(dev); - if ( priv->dmaStorage ) { - pci_free_consistent(priv->pciDev, - priv->dmaSize, priv->dmaStorage, - priv->dmaStorageDMA ); + if (priv->dma_storage) { + pci_free_consistent(priv->pci_dev, + priv->dma_size, priv->dma_storage, + priv->dma_storage_dma); } #ifdef CONFIG_PCI pci_release_regions(pdev); #endif - free_netdev( dev ); + free_netdev(dev); - pci_set_drvdata( pdev, NULL ); + pci_set_drvdata(pdev, NULL); } static struct pci_driver tlan_driver = { @@ -482,13 +487,13 @@ static int __init tlan_probe(void) } TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n"); - TLan_EisaProbe(); + tlan_eisa_probe(); printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d EISA: %d\n", - TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s", - tlan_have_pci, tlan_have_eisa); + tlan_devices_installed, tlan_devices_installed == 1 ? "" : "s", + tlan_have_pci, tlan_have_eisa); - if (TLanDevicesInstalled == 0) { + if (tlan_devices_installed == 0) { rc = -ENODEV; goto err_out_pci_unreg; } @@ -501,39 +506,39 @@ err_out_pci_free: } -static int __devinit tlan_init_one( struct pci_dev *pdev, - const struct pci_device_id *ent) +static int __devinit tlan_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) { - return TLan_probe1( pdev, -1, -1, 0, ent); + return tlan_probe1(pdev, -1, -1, 0, ent); } /* - *************************************************************** - * tlan_probe1 - * - * Returns: - * 0 on success, error code on error - * Parms: - * none - * - * The name is lower case to fit in with all the rest of - * the netcard_probe names. This function looks for - * another TLan based adapter, setting it up with the - * allocated device struct if one is found. - * tlan_probe has been ported to the new net API and - * now allocates its own device structure. This function - * is also used by modules. - * - **************************************************************/ - -static int __devinit TLan_probe1(struct pci_dev *pdev, +*************************************************************** +* tlan_probe1 +* +* Returns: +* 0 on success, error code on error +* Parms: +* none +* +* The name is lower case to fit in with all the rest of +* the netcard_probe names. This function looks for +* another TLan based adapter, setting it up with the +* allocated device struct if one is found. +* tlan_probe has been ported to the new net API and +* now allocates its own device structure. This function +* is also used by modules. +* +**************************************************************/ + +static int __devinit tlan_probe1(struct pci_dev *pdev, long ioaddr, int irq, int rev, - const struct pci_device_id *ent ) + const struct pci_device_id *ent) { struct net_device *dev; - TLanPrivateInfo *priv; + struct tlan_priv *priv; u16 device_id; int reg, rc = -ENODEV; @@ -543,7 +548,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, if (rc) return rc; - rc = pci_request_regions(pdev, TLanSignature); + rc = pci_request_regions(pdev, tlan_signature); if (rc) { printk(KERN_ERR "TLAN: Could not reserve IO regions\n"); goto err_out; @@ -551,7 +556,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, } #endif /* CONFIG_PCI */ - dev = alloc_etherdev(sizeof(TLanPrivateInfo)); + dev = alloc_etherdev(sizeof(struct tlan_priv)); if (dev == NULL) { printk(KERN_ERR "TLAN: Could not allocate memory for device.\n"); rc = -ENOMEM; @@ -561,26 +566,28 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, priv = netdev_priv(dev); - priv->pciDev = pdev; + priv->pci_dev = pdev; priv->dev = dev; /* Is this a PCI device? */ if (pdev) { - u32 pci_io_base = 0; + u32 pci_io_base = 0; priv->adapter = &board_info[ent->driver_data]; rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (rc) { - printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n"); + printk(KERN_ERR + "TLAN: No suitable PCI mapping available.\n"); goto err_out_free_dev; } - for ( reg= 0; reg <= 5; reg ++ ) { + for (reg = 0; reg <= 5; reg++) { if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) { pci_io_base = pci_resource_start(pdev, reg); - TLAN_DBG( TLAN_DEBUG_GNRL, "IO mapping is available at %x.\n", - pci_io_base); + TLAN_DBG(TLAN_DEBUG_GNRL, + "IO mapping is available at %x.\n", + pci_io_base); break; } } @@ -592,7 +599,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, dev->base_addr = pci_io_base; dev->irq = pdev->irq; - priv->adapterRev = pdev->revision; + priv->adapter_rev = pdev->revision; pci_set_master(pdev); pci_set_drvdata(pdev, dev); @@ -602,11 +609,11 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, device_id = inw(ioaddr + EISA_ID2); priv->is_eisa = 1; if (device_id == 0x20F1) { - priv->adapter = &board_info[13]; /* NetFlex-3/E */ - priv->adapterRev = 23; /* TLAN 2.3 */ + priv->adapter = &board_info[13]; /* NetFlex-3/E */ + priv->adapter_rev = 23; /* TLAN 2.3 */ } else { priv->adapter = &board_info[14]; - priv->adapterRev = 10; /* TLAN 1.0 */ + priv->adapter_rev = 10; /* TLAN 1.0 */ } dev->base_addr = ioaddr; dev->irq = irq; @@ -620,11 +627,11 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0 : (dev->mem_start & 0x18) >> 3; - if (priv->speed == 0x1) { + if (priv->speed == 0x1) priv->speed = TLAN_SPEED_10; - } else if (priv->speed == 0x2) { + else if (priv->speed == 0x2) priv->speed = TLAN_SPEED_100; - } + debug = priv->debug = dev->mem_end; } else { priv->aui = aui[boards_found]; @@ -635,11 +642,11 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, /* This will be used when we get an adapter error from * within our irq handler */ - INIT_WORK(&priv->tlan_tqueue, TLan_tx_timeout_work); + INIT_WORK(&priv->tlan_tqueue, tlan_tx_timeout_work); spin_lock_init(&priv->lock); - rc = TLan_Init(dev); + rc = tlan_init(dev); if (rc) { printk(KERN_ERR "TLAN: Could not set up device.\n"); goto err_out_free_dev; @@ -652,29 +659,29 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, } - TLanDevicesInstalled++; + tlan_devices_installed++; boards_found++; /* pdev is NULL if this is an EISA device */ if (pdev) tlan_have_pci++; else { - priv->nextDevice = TLan_Eisa_Devices; - TLan_Eisa_Devices = dev; + priv->next_device = tlan_eisa_devices; + tlan_eisa_devices = dev; tlan_have_eisa++; } printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n", - dev->name, - (int) dev->irq, - (int) dev->base_addr, - priv->adapter->deviceLabel, - priv->adapterRev); + dev->name, + (int) dev->irq, + (int) dev->base_addr, + priv->adapter->device_label, + priv->adapter_rev); return 0; err_out_uninit: - pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage, - priv->dmaStorageDMA ); + pci_free_consistent(priv->pci_dev, priv->dma_size, priv->dma_storage, + priv->dma_storage_dma); err_out_free_dev: free_netdev(dev); err_out_regions: @@ -689,22 +696,23 @@ err_out: } -static void TLan_Eisa_Cleanup(void) +static void tlan_eisa_cleanup(void) { struct net_device *dev; - TLanPrivateInfo *priv; + struct tlan_priv *priv; - while( tlan_have_eisa ) { - dev = TLan_Eisa_Devices; + while (tlan_have_eisa) { + dev = tlan_eisa_devices; priv = netdev_priv(dev); - if (priv->dmaStorage) { - pci_free_consistent(priv->pciDev, priv->dmaSize, - priv->dmaStorage, priv->dmaStorageDMA ); + if (priv->dma_storage) { + pci_free_consistent(priv->pci_dev, priv->dma_size, + priv->dma_storage, + priv->dma_storage_dma); } - release_region( dev->base_addr, 0x10); - unregister_netdev( dev ); - TLan_Eisa_Devices = priv->nextDevice; - free_netdev( dev ); + release_region(dev->base_addr, 0x10); + unregister_netdev(dev); + tlan_eisa_devices = priv->next_device; + free_netdev(dev); tlan_have_eisa--; } } @@ -715,7 +723,7 @@ static void __exit tlan_exit(void) pci_unregister_driver(&tlan_driver); if (tlan_have_eisa) - TLan_Eisa_Cleanup(); + tlan_eisa_cleanup(); } @@ -726,24 +734,24 @@ module_exit(tlan_exit); - /************************************************************** - * TLan_EisaProbe - * - * Returns: 0 on success, 1 otherwise - * - * Parms: None - * - * - * This functions probes for EISA devices and calls - * TLan_probe1 when one is found. - * - *************************************************************/ +/************************************************************** + * tlan_eisa_probe + * + * Returns: 0 on success, 1 otherwise + * + * Parms: None + * + * + * This functions probes for EISA devices and calls + * TLan_probe1 when one is found. + * + *************************************************************/ -static void __init TLan_EisaProbe (void) +static void __init tlan_eisa_probe(void) { - long ioaddr; - int rc = -ENODEV; - int irq; + long ioaddr; + int rc = -ENODEV; + int irq; u16 device_id; if (!EISA_bus) { @@ -754,15 +762,16 @@ static void __init TLan_EisaProbe (void) /* Loop through all slots of the EISA bus */ for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { - TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", - (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID)); - TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", - (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2)); + TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n", + (int) ioaddr + 0xc80, inw(ioaddr + EISA_ID)); + TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n", + (int) ioaddr + 0xc82, inw(ioaddr + EISA_ID2)); - TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ", - (int) ioaddr); - if (request_region(ioaddr, 0x10, TLanSignature) == NULL) + TLAN_DBG(TLAN_DEBUG_PROBE, + "Probing for EISA adapter at IO: 0x%4x : ", + (int) ioaddr); + if (request_region(ioaddr, 0x10, tlan_signature) == NULL) goto out; if (inw(ioaddr + EISA_ID) != 0x110E) { @@ -772,180 +781,186 @@ static void __init TLan_EisaProbe (void) device_id = inw(ioaddr + EISA_ID2); if (device_id != 0x20F1 && device_id != 0x40F1) { - release_region (ioaddr, 0x10); + release_region(ioaddr, 0x10); goto out; } - if (inb(ioaddr + EISA_CR) != 0x1) { /* Check if adapter is enabled */ - release_region (ioaddr, 0x10); + /* check if adapter is enabled */ + if (inb(ioaddr + EISA_CR) != 0x1) { + release_region(ioaddr, 0x10); goto out2; } if (debug == 0x10) - printk("Found one\n"); + printk(KERN_INFO "Found one\n"); /* Get irq from board */ - switch (inb(ioaddr + 0xCC0)) { - case(0x10): - irq=5; - break; - case(0x20): - irq=9; - break; - case(0x40): - irq=10; - break; - case(0x80): - irq=11; - break; - default: - goto out; + switch (inb(ioaddr + 0xcc0)) { + case(0x10): + irq = 5; + break; + case(0x20): + irq = 9; + break; + case(0x40): + irq = 10; + break; + case(0x80): + irq = 11; + break; + default: + goto out; } /* Setup the newly found eisa adapter */ - rc = TLan_probe1( NULL, ioaddr, irq, - 12, NULL); + rc = tlan_probe1(NULL, ioaddr, irq, + 12, NULL); continue; - out: - if (debug == 0x10) - printk("None found\n"); - continue; +out: + if (debug == 0x10) + printk(KERN_INFO "None found\n"); + continue; - out2: if (debug == 0x10) - printk("Card found but it is not enabled, skipping\n"); - continue; +out2: + if (debug == 0x10) + printk(KERN_INFO "Card found but it is not enabled, skipping\n"); + continue; } -} /* TLan_EisaProbe */ +} #ifdef CONFIG_NET_POLL_CONTROLLER -static void TLan_Poll(struct net_device *dev) +static void tlan_poll(struct net_device *dev) { disable_irq(dev->irq); - TLan_HandleInterrupt(dev->irq, dev); + tlan_handle_interrupt(dev->irq, dev); enable_irq(dev->irq); } #endif -static const struct net_device_ops TLan_netdev_ops = { - .ndo_open = TLan_Open, - .ndo_stop = TLan_Close, - .ndo_start_xmit = TLan_StartTx, - .ndo_tx_timeout = TLan_tx_timeout, - .ndo_get_stats = TLan_GetStats, - .ndo_set_multicast_list = TLan_SetMulticastList, - .ndo_do_ioctl = TLan_ioctl, +static const struct net_device_ops tlan_netdev_ops = { + .ndo_open = tlan_open, + .ndo_stop = tlan_close, + .ndo_start_xmit = tlan_start_tx, + .ndo_tx_timeout = tlan_tx_timeout, + .ndo_get_stats = tlan_get_stats, + .ndo_set_multicast_list = tlan_set_multicast_list, + .ndo_do_ioctl = tlan_ioctl, .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, #ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = TLan_Poll, + .ndo_poll_controller = tlan_poll, #endif }; - /*************************************************************** - * TLan_Init - * - * Returns: - * 0 on success, error code otherwise. - * Parms: - * dev The structure of the device to be - * init'ed. - * - * This function completes the initialization of the - * device structure and driver. It reserves the IO - * addresses, allocates memory for the lists and bounce - * buffers, retrieves the MAC address from the eeprom - * and assignes the device's methods. - * - **************************************************************/ - -static int TLan_Init( struct net_device *dev ) +/*************************************************************** + * tlan_init + * + * Returns: + * 0 on success, error code otherwise. + * Parms: + * dev The structure of the device to be + * init'ed. + * + * This function completes the initialization of the + * device structure and driver. It reserves the IO + * addresses, allocates memory for the lists and bounce + * buffers, retrieves the MAC address from the eeprom + * and assignes the device's methods. + * + **************************************************************/ + +static int tlan_init(struct net_device *dev) { int dma_size; - int err; + int err; int i; - TLanPrivateInfo *priv; + struct tlan_priv *priv; priv = netdev_priv(dev); - dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS ) - * ( sizeof(TLanList) ); - priv->dmaStorage = pci_alloc_consistent(priv->pciDev, - dma_size, &priv->dmaStorageDMA); - priv->dmaSize = dma_size; - - if ( priv->dmaStorage == NULL ) { - printk(KERN_ERR "TLAN: Could not allocate lists and buffers for %s.\n", - dev->name ); + dma_size = (TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS) + * (sizeof(struct tlan_list)); + priv->dma_storage = pci_alloc_consistent(priv->pci_dev, + dma_size, + &priv->dma_storage_dma); + priv->dma_size = dma_size; + + if (priv->dma_storage == NULL) { + printk(KERN_ERR + "TLAN: Could not allocate lists and buffers for %s.\n", + dev->name); return -ENOMEM; } - memset( priv->dmaStorage, 0, dma_size ); - priv->rxList = (TLanList *) ALIGN((unsigned long)priv->dmaStorage, 8); - priv->rxListDMA = ALIGN(priv->dmaStorageDMA, 8); - priv->txList = priv->rxList + TLAN_NUM_RX_LISTS; - priv->txListDMA = priv->rxListDMA + sizeof(TLanList) * TLAN_NUM_RX_LISTS; + memset(priv->dma_storage, 0, dma_size); + priv->rx_list = (struct tlan_list *) + ALIGN((unsigned long)priv->dma_storage, 8); + priv->rx_list_dma = ALIGN(priv->dma_storage_dma, 8); + priv->tx_list = priv->rx_list + TLAN_NUM_RX_LISTS; + priv->tx_list_dma = + priv->rx_list_dma + sizeof(struct tlan_list)*TLAN_NUM_RX_LISTS; err = 0; - for ( i = 0; i < 6 ; i++ ) - err |= TLan_EeReadByte( dev, - (u8) priv->adapter->addrOfs + i, - (u8 *) &dev->dev_addr[i] ); - if ( err ) { + for (i = 0; i < 6 ; i++) + err |= tlan_ee_read_byte(dev, + (u8) priv->adapter->addr_ofs + i, + (u8 *) &dev->dev_addr[i]); + if (err) { printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n", - dev->name, - err ); + dev->name, + err); } dev->addr_len = 6; netif_carrier_off(dev); /* Device methods */ - dev->netdev_ops = &TLan_netdev_ops; + dev->netdev_ops = &tlan_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; return 0; -} /* TLan_Init */ +} - /*************************************************************** - * TLan_Open - * - * Returns: - * 0 on success, error code otherwise. - * Parms: - * dev Structure of device to be opened. - * - * This routine puts the driver and TLAN adapter in a - * state where it is ready to send and receive packets. - * It allocates the IRQ, resets and brings the adapter - * out of reset, and allows interrupts. It also delays - * the startup for autonegotiation or sends a Rx GO - * command to the adapter, as appropriate. - * - **************************************************************/ +/*************************************************************** + * tlan_open + * + * Returns: + * 0 on success, error code otherwise. + * Parms: + * dev Structure of device to be opened. + * + * This routine puts the driver and TLAN adapter in a + * state where it is ready to send and receive packets. + * It allocates the IRQ, resets and brings the adapter + * out of reset, and allows interrupts. It also delays + * the startup for autonegotiation or sends a Rx GO + * command to the adapter, as appropriate. + * + **************************************************************/ -static int TLan_Open( struct net_device *dev ) +static int tlan_open(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); int err; - priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION ); - err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED, - dev->name, dev ); + priv->tlan_rev = tlan_dio_read8(dev->base_addr, TLAN_DEF_REVISION); + err = request_irq(dev->irq, tlan_handle_interrupt, IRQF_SHARED, + dev->name, dev); - if ( err ) { + if (err) { pr_err("TLAN: Cannot open %s because IRQ %d is already in use.\n", - dev->name, dev->irq ); + dev->name, dev->irq); return err; } @@ -953,145 +968,145 @@ static int TLan_Open( struct net_device *dev ) netif_start_queue(dev); /* NOTE: It might not be necessary to read the stats before a - reset if you don't care what the values are. + reset if you don't care what the values are. */ - TLan_ResetLists( dev ); - TLan_ReadAndClearStats( dev, TLAN_IGNORE ); - TLan_ResetAdapter( dev ); + tlan_reset_lists(dev); + tlan_read_and_clear_stats(dev, TLAN_IGNORE); + tlan_reset_adapter(dev); - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n", - dev->name, priv->tlanRev ); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n", + dev->name, priv->tlan_rev); return 0; -} /* TLan_Open */ +} - /************************************************************** - * TLan_ioctl - * - * Returns: - * 0 on success, error code otherwise - * Params: - * dev structure of device to receive ioctl. - * - * rq ifreq structure to hold userspace data. - * - * cmd ioctl command. - * - * - *************************************************************/ +/************************************************************** + * tlan_ioctl + * + * Returns: + * 0 on success, error code otherwise + * Params: + * dev structure of device to receive ioctl. + * + * rq ifreq structure to hold userspace data. + * + * cmd ioctl command. + * + * + *************************************************************/ -static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); struct mii_ioctl_data *data = if_mii(rq); - u32 phy = priv->phy[priv->phyNum]; + u32 phy = priv->phy[priv->phy_num]; - if (!priv->phyOnline) + if (!priv->phy_online) return -EAGAIN; - switch(cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - data->phy_id = phy; + switch (cmd) { + case SIOCGMIIPHY: /* get address of MII PHY in use. */ + data->phy_id = phy; - case SIOCGMIIREG: /* Read MII PHY register. */ - TLan_MiiReadReg(dev, data->phy_id & 0x1f, - data->reg_num & 0x1f, &data->val_out); - return 0; + case SIOCGMIIREG: /* read MII PHY register. */ + tlan_mii_read_reg(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f, &data->val_out); + return 0; - case SIOCSMIIREG: /* Write MII PHY register. */ - TLan_MiiWriteReg(dev, data->phy_id & 0x1f, - data->reg_num & 0x1f, data->val_in); - return 0; - default: - return -EOPNOTSUPP; + case SIOCSMIIREG: /* write MII PHY register. */ + tlan_mii_write_reg(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f, data->val_in); + return 0; + default: + return -EOPNOTSUPP; } -} /* tlan_ioctl */ +} - /*************************************************************** - * TLan_tx_timeout - * - * Returns: nothing - * - * Params: - * dev structure of device which timed out - * during transmit. - * - **************************************************************/ +/*************************************************************** + * tlan_tx_timeout + * + * Returns: nothing + * + * Params: + * dev structure of device which timed out + * during transmit. + * + **************************************************************/ -static void TLan_tx_timeout(struct net_device *dev) +static void tlan_tx_timeout(struct net_device *dev) { - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name); /* Ok so we timed out, lets see what we can do about it...*/ - TLan_FreeLists( dev ); - TLan_ResetLists( dev ); - TLan_ReadAndClearStats( dev, TLAN_IGNORE ); - TLan_ResetAdapter( dev ); + tlan_free_lists(dev); + tlan_reset_lists(dev); + tlan_read_and_clear_stats(dev, TLAN_IGNORE); + tlan_reset_adapter(dev); dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue( dev ); + netif_wake_queue(dev); } - /*************************************************************** - * TLan_tx_timeout_work - * - * Returns: nothing - * - * Params: - * work work item of device which timed out - * - **************************************************************/ +/*************************************************************** + * tlan_tx_timeout_work + * + * Returns: nothing + * + * Params: + * work work item of device which timed out + * + **************************************************************/ -static void TLan_tx_timeout_work(struct work_struct *work) +static void tlan_tx_timeout_work(struct work_struct *work) { - TLanPrivateInfo *priv = - container_of(work, TLanPrivateInfo, tlan_tqueue); + struct tlan_priv *priv = + container_of(work, struct tlan_priv, tlan_tqueue); - TLan_tx_timeout(priv->dev); + tlan_tx_timeout(priv->dev); } - /*************************************************************** - * TLan_StartTx - * - * Returns: - * 0 on success, non-zero on failure. - * Parms: - * skb A pointer to the sk_buff containing the - * frame to be sent. - * dev The device to send the data on. - * - * This function adds a frame to the Tx list to be sent - * ASAP. First it verifies that the adapter is ready and - * there is room in the queue. Then it sets up the next - * available list, copies the frame to the corresponding - * buffer. If the adapter Tx channel is idle, it gives - * the adapter a Tx Go command on the list, otherwise it - * sets the forward address of the previous list to point - * to this one. Then it frees the sk_buff. - * - **************************************************************/ - -static netdev_tx_t TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) +/*************************************************************** + * tlan_start_tx + * + * Returns: + * 0 on success, non-zero on failure. + * Parms: + * skb A pointer to the sk_buff containing the + * frame to be sent. + * dev The device to send the data on. + * + * This function adds a frame to the Tx list to be sent + * ASAP. First it verifies that the adapter is ready and + * there is room in the queue. Then it sets up the next + * available list, copies the frame to the corresponding + * buffer. If the adapter Tx channel is idle, it gives + * the adapter a Tx Go command on the list, otherwise it + * sets the forward address of the previous list to point + * to this one. Then it frees the sk_buff. + * + **************************************************************/ + +static netdev_tx_t tlan_start_tx(struct sk_buff *skb, struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); dma_addr_t tail_list_phys; - TLanList *tail_list; + struct tlan_list *tail_list; unsigned long flags; unsigned int txlen; - if ( ! priv->phyOnline ) { - TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", - dev->name ); + if (!priv->phy_online) { + TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", + dev->name); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -1100,218 +1115,221 @@ static netdev_tx_t TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) return NETDEV_TX_OK; txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE); - tail_list = priv->txList + priv->txTail; - tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail; + tail_list = priv->tx_list + priv->tx_tail; + tail_list_phys = + priv->tx_list_dma + sizeof(struct tlan_list)*priv->tx_tail; - if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) { - TLAN_DBG( TLAN_DEBUG_TX, - "TRANSMIT: %s is busy (Head=%d Tail=%d)\n", - dev->name, priv->txHead, priv->txTail ); + if (tail_list->c_stat != TLAN_CSTAT_UNUSED) { + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: %s is busy (Head=%d Tail=%d)\n", + dev->name, priv->tx_head, priv->tx_tail); netif_stop_queue(dev); - priv->txBusyCount++; + priv->tx_busy_count++; return NETDEV_TX_BUSY; } tail_list->forward = 0; - tail_list->buffer[0].address = pci_map_single(priv->pciDev, + tail_list->buffer[0].address = pci_map_single(priv->pci_dev, skb->data, txlen, PCI_DMA_TODEVICE); - TLan_StoreSKB(tail_list, skb); + tlan_store_skb(tail_list, skb); - tail_list->frameSize = (u16) txlen; + tail_list->frame_size = (u16) txlen; tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen; tail_list->buffer[1].count = 0; tail_list->buffer[1].address = 0; spin_lock_irqsave(&priv->lock, flags); - tail_list->cStat = TLAN_CSTAT_READY; - if ( ! priv->txInProgress ) { - priv->txInProgress = 1; - TLAN_DBG( TLAN_DEBUG_TX, - "TRANSMIT: Starting TX on buffer %d\n", priv->txTail ); - outl( tail_list_phys, dev->base_addr + TLAN_CH_PARM ); - outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD ); + tail_list->c_stat = TLAN_CSTAT_READY; + if (!priv->tx_in_progress) { + priv->tx_in_progress = 1; + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: Starting TX on buffer %d\n", + priv->tx_tail); + outl(tail_list_phys, dev->base_addr + TLAN_CH_PARM); + outl(TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD); } else { - TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Adding buffer %d to TX channel\n", - priv->txTail ); - if ( priv->txTail == 0 ) { - ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: Adding buffer %d to TX channel\n", + priv->tx_tail); + if (priv->tx_tail == 0) { + (priv->tx_list + (TLAN_NUM_TX_LISTS - 1))->forward = tail_list_phys; } else { - ( priv->txList + ( priv->txTail - 1 ) )->forward + (priv->tx_list + (priv->tx_tail - 1))->forward = tail_list_phys; } } spin_unlock_irqrestore(&priv->lock, flags); - CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS ); + CIRC_INC(priv->tx_tail, TLAN_NUM_TX_LISTS); return NETDEV_TX_OK; -} /* TLan_StartTx */ +} - /*************************************************************** - * TLan_HandleInterrupt - * - * Returns: - * Nothing - * Parms: - * irq The line on which the interrupt - * occurred. - * dev_id A pointer to the device assigned to - * this irq line. - * - * This function handles an interrupt generated by its - * assigned TLAN adapter. The function deactivates - * interrupts on its adapter, records the type of - * interrupt, executes the appropriate subhandler, and - * acknowdges the interrupt to the adapter (thus - * re-enabling adapter interrupts. - * - **************************************************************/ +/*************************************************************** + * tlan_handle_interrupt + * + * Returns: + * Nothing + * Parms: + * irq The line on which the interrupt + * occurred. + * dev_id A pointer to the device assigned to + * this irq line. + * + * This function handles an interrupt generated by its + * assigned TLAN adapter. The function deactivates + * interrupts on its adapter, records the type of + * interrupt, executes the appropriate subhandler, and + * acknowdges the interrupt to the adapter (thus + * re-enabling adapter interrupts. + * + **************************************************************/ -static irqreturn_t TLan_HandleInterrupt(int irq, void *dev_id) +static irqreturn_t tlan_handle_interrupt(int irq, void *dev_id) { struct net_device *dev = dev_id; - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 host_int; u16 type; spin_lock(&priv->lock); - host_int = inw( dev->base_addr + TLAN_HOST_INT ); - type = ( host_int & TLAN_HI_IT_MASK ) >> 2; - if ( type ) { + host_int = inw(dev->base_addr + TLAN_HOST_INT); + type = (host_int & TLAN_HI_IT_MASK) >> 2; + if (type) { u32 ack; u32 host_cmd; - outw( host_int, dev->base_addr + TLAN_HOST_INT ); - ack = TLanIntVector[type]( dev, host_int ); + outw(host_int, dev->base_addr + TLAN_HOST_INT); + ack = tlan_int_vector[type](dev, host_int); - if ( ack ) { - host_cmd = TLAN_HC_ACK | ack | ( type << 18 ); - outl( host_cmd, dev->base_addr + TLAN_HOST_CMD ); + if (ack) { + host_cmd = TLAN_HC_ACK | ack | (type << 18); + outl(host_cmd, dev->base_addr + TLAN_HOST_CMD); } } spin_unlock(&priv->lock); return IRQ_RETVAL(type); -} /* TLan_HandleInterrupts */ +} - /*************************************************************** - * TLan_Close - * - * Returns: - * An error code. - * Parms: - * dev The device structure of the device to - * close. - * - * This function shuts down the adapter. It records any - * stats, puts the adapter into reset state, deactivates - * its time as needed, and frees the irq it is using. - * - **************************************************************/ +/*************************************************************** + * tlan_close + * + * Returns: + * An error code. + * Parms: + * dev The device structure of the device to + * close. + * + * This function shuts down the adapter. It records any + * stats, puts the adapter into reset state, deactivates + * its time as needed, and frees the irq it is using. + * + **************************************************************/ -static int TLan_Close(struct net_device *dev) +static int tlan_close(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); netif_stop_queue(dev); priv->neg_be_verbose = 0; - TLan_ReadAndClearStats( dev, TLAN_RECORD ); - outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD ); - if ( priv->timer.function != NULL ) { - del_timer_sync( &priv->timer ); + tlan_read_and_clear_stats(dev, TLAN_RECORD); + outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD); + if (priv->timer.function != NULL) { + del_timer_sync(&priv->timer); priv->timer.function = NULL; } - free_irq( dev->irq, dev ); - TLan_FreeLists( dev ); - TLAN_DBG( TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name ); + free_irq(dev->irq, dev); + tlan_free_lists(dev); + TLAN_DBG(TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name); return 0; -} /* TLan_Close */ +} - /*************************************************************** - * TLan_GetStats - * - * Returns: - * A pointer to the device's statistics structure. - * Parms: - * dev The device structure to return the - * stats for. - * - * This function updates the devices statistics by reading - * the TLAN chip's onboard registers. Then it returns the - * address of the statistics structure. - * - **************************************************************/ +/*************************************************************** + * tlan_get_stats + * + * Returns: + * A pointer to the device's statistics structure. + * Parms: + * dev The device structure to return the + * stats for. + * + * This function updates the devices statistics by reading + * the TLAN chip's onboard registers. Then it returns the + * address of the statistics structure. + * + **************************************************************/ -static struct net_device_stats *TLan_GetStats( struct net_device *dev ) +static struct net_device_stats *tlan_get_stats(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); int i; /* Should only read stats if open ? */ - TLan_ReadAndClearStats( dev, TLAN_RECORD ); + tlan_read_and_clear_stats(dev, TLAN_RECORD); - TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name, - priv->rxEocCount ); - TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name, - priv->txBusyCount ); - if ( debug & TLAN_DEBUG_GNRL ) { - TLan_PrintDio( dev->base_addr ); - TLan_PhyPrint( dev ); + TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name, + priv->rx_eoc_count); + TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name, + priv->tx_busy_count); + if (debug & TLAN_DEBUG_GNRL) { + tlan_print_dio(dev->base_addr); + tlan_phy_print(dev); } - if ( debug & TLAN_DEBUG_LIST ) { - for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) - TLan_PrintList( priv->rxList + i, "RX", i ); - for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) - TLan_PrintList( priv->txList + i, "TX", i ); + if (debug & TLAN_DEBUG_LIST) { + for (i = 0; i < TLAN_NUM_RX_LISTS; i++) + tlan_print_list(priv->rx_list + i, "RX", i); + for (i = 0; i < TLAN_NUM_TX_LISTS; i++) + tlan_print_list(priv->tx_list + i, "TX", i); } return &dev->stats; -} /* TLan_GetStats */ +} - /*************************************************************** - * TLan_SetMulticastList - * - * Returns: - * Nothing - * Parms: - * dev The device structure to set the - * multicast list for. - * - * This function sets the TLAN adaptor to various receive - * modes. If the IFF_PROMISC flag is set, promiscuous - * mode is acitviated. Otherwise, promiscuous mode is - * turned off. If the IFF_ALLMULTI flag is set, then - * the hash table is set to receive all group addresses. - * Otherwise, the first three multicast addresses are - * stored in AREG_1-3, and the rest are selected via the - * hash table, as necessary. - * - **************************************************************/ +/*************************************************************** + * tlan_set_multicast_list + * + * Returns: + * Nothing + * Parms: + * dev The device structure to set the + * multicast list for. + * + * This function sets the TLAN adaptor to various receive + * modes. If the IFF_PROMISC flag is set, promiscuous + * mode is acitviated. Otherwise, promiscuous mode is + * turned off. If the IFF_ALLMULTI flag is set, then + * the hash table is set to receive all group addresses. + * Otherwise, the first three multicast addresses are + * stored in AREG_1-3, and the rest are selected via the + * hash table, as necessary. + * + **************************************************************/ -static void TLan_SetMulticastList( struct net_device *dev ) +static void tlan_set_multicast_list(struct net_device *dev) { struct netdev_hw_addr *ha; u32 hash1 = 0; @@ -1320,53 +1338,56 @@ static void TLan_SetMulticastList( struct net_device *dev ) u32 offset; u8 tmp; - if ( dev->flags & IFF_PROMISC ) { - tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD ); - TLan_DioWrite8( dev->base_addr, - TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF ); + if (dev->flags & IFF_PROMISC) { + tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD); + tlan_dio_write8(dev->base_addr, + TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF); } else { - tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD ); - TLan_DioWrite8( dev->base_addr, - TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF ); - if ( dev->flags & IFF_ALLMULTI ) { - for ( i = 0; i < 3; i++ ) - TLan_SetMac( dev, i + 1, NULL ); - TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF ); - TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF ); + tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD); + tlan_dio_write8(dev->base_addr, + TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF); + if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < 3; i++) + tlan_set_mac(dev, i + 1, NULL); + tlan_dio_write32(dev->base_addr, TLAN_HASH_1, + 0xffffffff); + tlan_dio_write32(dev->base_addr, TLAN_HASH_2, + 0xffffffff); } else { i = 0; netdev_for_each_mc_addr(ha, dev) { - if ( i < 3 ) { - TLan_SetMac( dev, i + 1, + if (i < 3) { + tlan_set_mac(dev, i + 1, (char *) &ha->addr); } else { - offset = TLan_HashFunc((u8 *)&ha->addr); - if ( offset < 32 ) - hash1 |= ( 1 << offset ); + offset = + tlan_hash_func((u8 *)&ha->addr); + if (offset < 32) + hash1 |= (1 << offset); else - hash2 |= ( 1 << ( offset - 32 ) ); + hash2 |= (1 << (offset - 32)); } i++; } - for ( ; i < 3; i++ ) - TLan_SetMac( dev, i + 1, NULL ); - TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 ); - TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 ); + for ( ; i < 3; i++) + tlan_set_mac(dev, i + 1, NULL); + tlan_dio_write32(dev->base_addr, TLAN_HASH_1, hash1); + tlan_dio_write32(dev->base_addr, TLAN_HASH_2, hash2); } } -} /* TLan_SetMulticastList */ +} /***************************************************************************** ****************************************************************************** - ThunderLAN Driver Interrupt Vectors and Table +ThunderLAN driver interrupt vectors and table - Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN - Programmer's Guide" for more informations on handling interrupts - generated by TLAN based adapters. +please see chap. 4, "Interrupt Handling" of the "ThunderLAN +Programmer's Guide" for more informations on handling interrupts +generated by TLAN based adapters. ****************************************************************************** *****************************************************************************/ @@ -1374,46 +1395,48 @@ static void TLan_SetMulticastList( struct net_device *dev ) - /*************************************************************** - * TLan_HandleTxEOF - * - * Returns: - * 1 - * Parms: - * dev Device assigned the IRQ that was - * raised. - * host_int The contents of the HOST_INT - * port. - * - * This function handles Tx EOF interrupts which are raised - * by the adapter when it has completed sending the - * contents of a buffer. If detemines which list/buffer - * was completed and resets it. If the buffer was the last - * in the channel (EOC), then the function checks to see if - * another buffer is ready to send, and if so, sends a Tx - * Go command. Finally, the driver activates/continues the - * activity LED. - * - **************************************************************/ - -static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) +/*************************************************************** + * tlan_handle_tx_eof + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles Tx EOF interrupts which are raised + * by the adapter when it has completed sending the + * contents of a buffer. If detemines which list/buffer + * was completed and resets it. If the buffer was the last + * in the channel (EOC), then the function checks to see if + * another buffer is ready to send, and if so, sends a Tx + * Go command. Finally, the driver activates/continues the + * activity LED. + * + **************************************************************/ + +static u32 tlan_handle_tx_eof(struct net_device *dev, u16 host_int) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); int eoc = 0; - TLanList *head_list; + struct tlan_list *head_list; dma_addr_t head_list_phys; u32 ack = 0; - u16 tmpCStat; + u16 tmp_c_stat; - TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n", - priv->txHead, priv->txTail ); - head_list = priv->txList + priv->txHead; + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n", + priv->tx_head, priv->tx_tail); + head_list = priv->tx_list + priv->tx_head; - while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) { - struct sk_buff *skb = TLan_GetSKB(head_list); + while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP) + && (ack < 255)) { + struct sk_buff *skb = tlan_get_skb(head_list); ack++; - pci_unmap_single(priv->pciDev, head_list->buffer[0].address, + pci_unmap_single(priv->pci_dev, head_list->buffer[0].address, max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE), PCI_DMA_TODEVICE); @@ -1421,304 +1444,311 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) head_list->buffer[8].address = 0; head_list->buffer[9].address = 0; - if ( tmpCStat & TLAN_CSTAT_EOC ) + if (tmp_c_stat & TLAN_CSTAT_EOC) eoc = 1; - dev->stats.tx_bytes += head_list->frameSize; + dev->stats.tx_bytes += head_list->frame_size; - head_list->cStat = TLAN_CSTAT_UNUSED; + head_list->c_stat = TLAN_CSTAT_UNUSED; netif_start_queue(dev); - CIRC_INC( priv->txHead, TLAN_NUM_TX_LISTS ); - head_list = priv->txList + priv->txHead; + CIRC_INC(priv->tx_head, TLAN_NUM_TX_LISTS); + head_list = priv->tx_list + priv->tx_head; } if (!ack) - printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n"); - - if ( eoc ) { - TLAN_DBG( TLAN_DEBUG_TX, - "TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n", - priv->txHead, priv->txTail ); - head_list = priv->txList + priv->txHead; - head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead; - if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) { - outl(head_list_phys, dev->base_addr + TLAN_CH_PARM ); + printk(KERN_INFO + "TLAN: Received interrupt for uncompleted TX frame.\n"); + + if (eoc) { + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: handling TX EOC (Head=%d Tail=%d)\n", + priv->tx_head, priv->tx_tail); + head_list = priv->tx_list + priv->tx_head; + head_list_phys = priv->tx_list_dma + + sizeof(struct tlan_list)*priv->tx_head; + if (head_list->c_stat & TLAN_CSTAT_READY) { + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); ack |= TLAN_HC_GO; } else { - priv->txInProgress = 0; + priv->tx_in_progress = 0; } } - if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) { - TLan_DioWrite8( dev->base_addr, - TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT ); - if ( priv->timer.function == NULL ) { - priv->timer.function = TLan_Timer; - priv->timer.data = (unsigned long) dev; - priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY; - priv->timerSetAt = jiffies; - priv->timerType = TLAN_TIMER_ACTIVITY; - add_timer(&priv->timer); - } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) { - priv->timerSetAt = jiffies; + if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) { + tlan_dio_write8(dev->base_addr, + TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT); + if (priv->timer.function == NULL) { + priv->timer.function = tlan_timer; + priv->timer.data = (unsigned long) dev; + priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY; + priv->timer_set_at = jiffies; + priv->timer_type = TLAN_TIMER_ACTIVITY; + add_timer(&priv->timer); + } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) { + priv->timer_set_at = jiffies; } } return ack; -} /* TLan_HandleTxEOF */ +} - /*************************************************************** - * TLan_HandleStatOverflow - * - * Returns: - * 1 - * Parms: - * dev Device assigned the IRQ that was - * raised. - * host_int The contents of the HOST_INT - * port. - * - * This function handles the Statistics Overflow interrupt - * which means that one or more of the TLAN statistics - * registers has reached 1/2 capacity and needs to be read. - * - **************************************************************/ +/*************************************************************** + * TLan_HandleStatOverflow + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles the Statistics Overflow interrupt + * which means that one or more of the TLAN statistics + * registers has reached 1/2 capacity and needs to be read. + * + **************************************************************/ -static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) +static u32 tlan_handle_stat_overflow(struct net_device *dev, u16 host_int) { - TLan_ReadAndClearStats( dev, TLAN_RECORD ); + tlan_read_and_clear_stats(dev, TLAN_RECORD); return 1; -} /* TLan_HandleStatOverflow */ - - - - - /*************************************************************** - * TLan_HandleRxEOF - * - * Returns: - * 1 - * Parms: - * dev Device assigned the IRQ that was - * raised. - * host_int The contents of the HOST_INT - * port. - * - * This function handles the Rx EOF interrupt which - * indicates a frame has been received by the adapter from - * the net and the frame has been transferred to memory. - * The function determines the bounce buffer the frame has - * been loaded into, creates a new sk_buff big enough to - * hold the frame, and sends it to protocol stack. It - * then resets the used buffer and appends it to the end - * of the list. If the frame was the last in the Rx - * channel (EOC), the function restarts the receive channel - * by sending an Rx Go command to the adapter. Then it - * activates/continues the activity LED. - * - **************************************************************/ - -static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) +} + + + + +/*************************************************************** + * TLan_HandleRxEOF + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles the Rx EOF interrupt which + * indicates a frame has been received by the adapter from + * the net and the frame has been transferred to memory. + * The function determines the bounce buffer the frame has + * been loaded into, creates a new sk_buff big enough to + * hold the frame, and sends it to protocol stack. It + * then resets the used buffer and appends it to the end + * of the list. If the frame was the last in the Rx + * channel (EOC), the function restarts the receive channel + * by sending an Rx Go command to the adapter. Then it + * activates/continues the activity LED. + * + **************************************************************/ + +static u32 tlan_handle_rx_eof(struct net_device *dev, u16 host_int) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u32 ack = 0; int eoc = 0; - TLanList *head_list; + struct tlan_list *head_list; struct sk_buff *skb; - TLanList *tail_list; - u16 tmpCStat; + struct tlan_list *tail_list; + u16 tmp_c_stat; dma_addr_t head_list_phys; - TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n", - priv->rxHead, priv->rxTail ); - head_list = priv->rxList + priv->rxHead; - head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead; + TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: handling RX EOF (Head=%d Tail=%d)\n", + priv->rx_head, priv->rx_tail); + head_list = priv->rx_list + priv->rx_head; + head_list_phys = + priv->rx_list_dma + sizeof(struct tlan_list)*priv->rx_head; - while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) { - dma_addr_t frameDma = head_list->buffer[0].address; - u32 frameSize = head_list->frameSize; + while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP) + && (ack < 255)) { + dma_addr_t frame_dma = head_list->buffer[0].address; + u32 frame_size = head_list->frame_size; struct sk_buff *new_skb; ack++; - if (tmpCStat & TLAN_CSTAT_EOC) + if (tmp_c_stat & TLAN_CSTAT_EOC) eoc = 1; new_skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5); - if ( !new_skb ) + if (!new_skb) goto drop_and_reuse; - skb = TLan_GetSKB(head_list); - pci_unmap_single(priv->pciDev, frameDma, + skb = tlan_get_skb(head_list); + pci_unmap_single(priv->pci_dev, frame_dma, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); - skb_put( skb, frameSize ); + skb_put(skb, frame_size); - dev->stats.rx_bytes += frameSize; + dev->stats.rx_bytes += frame_size; - skb->protocol = eth_type_trans( skb, dev ); - netif_rx( skb ); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); - head_list->buffer[0].address = pci_map_single(priv->pciDev, - new_skb->data, - TLAN_MAX_FRAME_SIZE, - PCI_DMA_FROMDEVICE); + head_list->buffer[0].address = + pci_map_single(priv->pci_dev, new_skb->data, + TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); - TLan_StoreSKB(head_list, new_skb); + tlan_store_skb(head_list, new_skb); drop_and_reuse: head_list->forward = 0; - head_list->cStat = 0; - tail_list = priv->rxList + priv->rxTail; + head_list->c_stat = 0; + tail_list = priv->rx_list + priv->rx_tail; tail_list->forward = head_list_phys; - CIRC_INC( priv->rxHead, TLAN_NUM_RX_LISTS ); - CIRC_INC( priv->rxTail, TLAN_NUM_RX_LISTS ); - head_list = priv->rxList + priv->rxHead; - head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead; + CIRC_INC(priv->rx_head, TLAN_NUM_RX_LISTS); + CIRC_INC(priv->rx_tail, TLAN_NUM_RX_LISTS); + head_list = priv->rx_list + priv->rx_head; + head_list_phys = priv->rx_list_dma + + sizeof(struct tlan_list)*priv->rx_head; } if (!ack) - printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n"); - - - if ( eoc ) { - TLAN_DBG( TLAN_DEBUG_RX, - "RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n", - priv->rxHead, priv->rxTail ); - head_list = priv->rxList + priv->rxHead; - head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead; - outl(head_list_phys, dev->base_addr + TLAN_CH_PARM ); + printk(KERN_INFO + "TLAN: Received interrupt for uncompleted RX frame.\n"); + + + if (eoc) { + TLAN_DBG(TLAN_DEBUG_RX, + "RECEIVE: handling RX EOC (Head=%d Tail=%d)\n", + priv->rx_head, priv->rx_tail); + head_list = priv->rx_list + priv->rx_head; + head_list_phys = priv->rx_list_dma + + sizeof(struct tlan_list)*priv->rx_head; + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); ack |= TLAN_HC_GO | TLAN_HC_RT; - priv->rxEocCount++; + priv->rx_eoc_count++; } - if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) { - TLan_DioWrite8( dev->base_addr, - TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT ); - if ( priv->timer.function == NULL ) { - priv->timer.function = TLan_Timer; + if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) { + tlan_dio_write8(dev->base_addr, + TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT); + if (priv->timer.function == NULL) { + priv->timer.function = tlan_timer; priv->timer.data = (unsigned long) dev; priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY; - priv->timerSetAt = jiffies; - priv->timerType = TLAN_TIMER_ACTIVITY; + priv->timer_set_at = jiffies; + priv->timer_type = TLAN_TIMER_ACTIVITY; add_timer(&priv->timer); - } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) { - priv->timerSetAt = jiffies; + } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) { + priv->timer_set_at = jiffies; } } return ack; -} /* TLan_HandleRxEOF */ +} - /*************************************************************** - * TLan_HandleDummy - * - * Returns: - * 1 - * Parms: - * dev Device assigned the IRQ that was - * raised. - * host_int The contents of the HOST_INT - * port. - * - * This function handles the Dummy interrupt, which is - * raised whenever a test interrupt is generated by setting - * the Req_Int bit of HOST_CMD to 1. - * - **************************************************************/ +/*************************************************************** + * tlan_handle_dummy + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles the Dummy interrupt, which is + * raised whenever a test interrupt is generated by setting + * the Req_Int bit of HOST_CMD to 1. + * + **************************************************************/ -static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) +static u32 tlan_handle_dummy(struct net_device *dev, u16 host_int) { - printk( "TLAN: Test interrupt on %s.\n", dev->name ); + pr_info("TLAN: Test interrupt on %s.\n", dev->name); return 1; -} /* TLan_HandleDummy */ +} - /*************************************************************** - * TLan_HandleTxEOC - * - * Returns: - * 1 - * Parms: - * dev Device assigned the IRQ that was - * raised. - * host_int The contents of the HOST_INT - * port. - * - * This driver is structured to determine EOC occurrences by - * reading the CSTAT member of the list structure. Tx EOC - * interrupts are disabled via the DIO INTDIS register. - * However, TLAN chips before revision 3.0 didn't have this - * functionality, so process EOC events if this is the - * case. - * - **************************************************************/ +/*************************************************************** + * tlan_handle_tx_eoc + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This driver is structured to determine EOC occurrences by + * reading the CSTAT member of the list structure. Tx EOC + * interrupts are disabled via the DIO INTDIS register. + * However, TLAN chips before revision 3.0 didn't have this + * functionality, so process EOC events if this is the + * case. + * + **************************************************************/ -static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) +static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int) { - TLanPrivateInfo *priv = netdev_priv(dev); - TLanList *head_list; + struct tlan_priv *priv = netdev_priv(dev); + struct tlan_list *head_list; dma_addr_t head_list_phys; u32 ack = 1; host_int = 0; - if ( priv->tlanRev < 0x30 ) { - TLAN_DBG( TLAN_DEBUG_TX, - "TRANSMIT: Handling TX EOC (Head=%d Tail=%d) -- IRQ\n", - priv->txHead, priv->txTail ); - head_list = priv->txList + priv->txHead; - head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead; - if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) { + if (priv->tlan_rev < 0x30) { + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: handling TX EOC (Head=%d Tail=%d) -- IRQ\n", + priv->tx_head, priv->tx_tail); + head_list = priv->tx_list + priv->tx_head; + head_list_phys = priv->tx_list_dma + + sizeof(struct tlan_list)*priv->tx_head; + if (head_list->c_stat & TLAN_CSTAT_READY) { netif_stop_queue(dev); - outl( head_list_phys, dev->base_addr + TLAN_CH_PARM ); + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); ack |= TLAN_HC_GO; } else { - priv->txInProgress = 0; + priv->tx_in_progress = 0; } } return ack; -} /* TLan_HandleTxEOC */ +} - /*************************************************************** - * TLan_HandleStatusCheck - * - * Returns: - * 0 if Adapter check, 1 if Network Status check. - * Parms: - * dev Device assigned the IRQ that was - * raised. - * host_int The contents of the HOST_INT - * port. - * - * This function handles Adapter Check/Network Status - * interrupts generated by the adapter. It checks the - * vector in the HOST_INT register to determine if it is - * an Adapter Check interrupt. If so, it resets the - * adapter. Otherwise it clears the status registers - * and services the PHY. - * - **************************************************************/ +/*************************************************************** + * tlan_handle_status_check + * + * Returns: + * 0 if Adapter check, 1 if Network Status check. + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles Adapter Check/Network Status + * interrupts generated by the adapter. It checks the + * vector in the HOST_INT register to determine if it is + * an Adapter Check interrupt. If so, it resets the + * adapter. Otherwise it clears the status registers + * and services the PHY. + * + **************************************************************/ -static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) +static u32 tlan_handle_status_check(struct net_device *dev, u16 host_int) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u32 ack; u32 error; u8 net_sts; @@ -1727,92 +1757,94 @@ static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) u16 tlphy_sts; ack = 1; - if ( host_int & TLAN_HI_IV_MASK ) { - netif_stop_queue( dev ); - error = inl( dev->base_addr + TLAN_CH_PARM ); - printk( "TLAN: %s: Adaptor Error = 0x%x\n", dev->name, error ); - TLan_ReadAndClearStats( dev, TLAN_RECORD ); - outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD ); + if (host_int & TLAN_HI_IV_MASK) { + netif_stop_queue(dev); + error = inl(dev->base_addr + TLAN_CH_PARM); + pr_info("TLAN: %s: Adaptor Error = 0x%x\n", dev->name, error); + tlan_read_and_clear_stats(dev, TLAN_RECORD); + outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD); schedule_work(&priv->tlan_tqueue); netif_wake_queue(dev); ack = 0; } else { - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name ); - phy = priv->phy[priv->phyNum]; - - net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS ); - if ( net_sts ) { - TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts ); - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n", - dev->name, (unsigned) net_sts ); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name); + phy = priv->phy[priv->phy_num]; + + net_sts = tlan_dio_read8(dev->base_addr, TLAN_NET_STS); + if (net_sts) { + tlan_dio_write8(dev->base_addr, TLAN_NET_STS, net_sts); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n", + dev->name, (unsigned) net_sts); } - if ( ( net_sts & TLAN_NET_STS_MIRQ ) && ( priv->phyNum == 0 ) ) { - TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts ); - TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl ); - if ( ! ( tlphy_sts & TLAN_TS_POLOK ) && - ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) { - tlphy_ctl |= TLAN_TC_SWAPOL; - TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl); - } else if ( ( tlphy_sts & TLAN_TS_POLOK ) && - ( tlphy_ctl & TLAN_TC_SWAPOL ) ) { - tlphy_ctl &= ~TLAN_TC_SWAPOL; - TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl); - } - - if (debug) { - TLan_PhyPrint( dev ); + if ((net_sts & TLAN_NET_STS_MIRQ) && (priv->phy_num == 0)) { + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_STS, &tlphy_sts); + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl); + if (!(tlphy_sts & TLAN_TS_POLOK) && + !(tlphy_ctl & TLAN_TC_SWAPOL)) { + tlphy_ctl |= TLAN_TC_SWAPOL; + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, + tlphy_ctl); + } else if ((tlphy_sts & TLAN_TS_POLOK) && + (tlphy_ctl & TLAN_TC_SWAPOL)) { + tlphy_ctl &= ~TLAN_TC_SWAPOL; + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, + tlphy_ctl); } + + if (debug) + tlan_phy_print(dev); } } return ack; -} /* TLan_HandleStatusCheck */ +} - /*************************************************************** - * TLan_HandleRxEOC - * - * Returns: - * 1 - * Parms: - * dev Device assigned the IRQ that was - * raised. - * host_int The contents of the HOST_INT - * port. - * - * This driver is structured to determine EOC occurrences by - * reading the CSTAT member of the list structure. Rx EOC - * interrupts are disabled via the DIO INTDIS register. - * However, TLAN chips before revision 3.0 didn't have this - * CSTAT member or a INTDIS register, so if this chip is - * pre-3.0, process EOC interrupts normally. - * - **************************************************************/ +/*************************************************************** + * tlan_handle_rx_eoc + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This driver is structured to determine EOC occurrences by + * reading the CSTAT member of the list structure. Rx EOC + * interrupts are disabled via the DIO INTDIS register. + * However, TLAN chips before revision 3.0 didn't have this + * CSTAT member or a INTDIS register, so if this chip is + * pre-3.0, process EOC interrupts normally. + * + **************************************************************/ -static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) +static u32 tlan_handle_rx_eoc(struct net_device *dev, u16 host_int) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); dma_addr_t head_list_phys; u32 ack = 1; - if ( priv->tlanRev < 0x30 ) { - TLAN_DBG( TLAN_DEBUG_RX, - "RECEIVE: Handling RX EOC (Head=%d Tail=%d) -- IRQ\n", - priv->rxHead, priv->rxTail ); - head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead; - outl( head_list_phys, dev->base_addr + TLAN_CH_PARM ); + if (priv->tlan_rev < 0x30) { + TLAN_DBG(TLAN_DEBUG_RX, + "RECEIVE: Handling RX EOC (head=%d tail=%d) -- IRQ\n", + priv->rx_head, priv->rx_tail); + head_list_phys = priv->rx_list_dma + + sizeof(struct tlan_list)*priv->rx_head; + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); ack |= TLAN_HC_GO | TLAN_HC_RT; - priv->rxEocCount++; + priv->rx_eoc_count++; } return ack; -} /* TLan_HandleRxEOC */ +} @@ -1820,98 +1852,98 @@ static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) /***************************************************************************** ****************************************************************************** - ThunderLAN Driver Timer Function +ThunderLAN driver timer function ****************************************************************************** *****************************************************************************/ - /*************************************************************** - * TLan_Timer - * - * Returns: - * Nothing - * Parms: - * data A value given to add timer when - * add_timer was called. - * - * This function handles timed functionality for the - * TLAN driver. The two current timer uses are for - * delaying for autonegotionation and driving the ACT LED. - * - Autonegotiation requires being allowed about - * 2 1/2 seconds before attempting to transmit a - * packet. It would be a very bad thing to hang - * the kernel this long, so the driver doesn't - * allow transmission 'til after this time, for - * certain PHYs. It would be much nicer if all - * PHYs were interrupt-capable like the internal - * PHY. - * - The ACT LED, which shows adapter activity, is - * driven by the driver, and so must be left on - * for a short period to power up the LED so it - * can be seen. This delay can be changed by - * changing the TLAN_TIMER_ACT_DELAY in tlan.h, - * if desired. 100 ms produces a slightly - * sluggish response. - * - **************************************************************/ - -static void TLan_Timer( unsigned long data ) +/*************************************************************** + * tlan_timer + * + * Returns: + * Nothing + * Parms: + * data A value given to add timer when + * add_timer was called. + * + * This function handles timed functionality for the + * TLAN driver. The two current timer uses are for + * delaying for autonegotionation and driving the ACT LED. + * - Autonegotiation requires being allowed about + * 2 1/2 seconds before attempting to transmit a + * packet. It would be a very bad thing to hang + * the kernel this long, so the driver doesn't + * allow transmission 'til after this time, for + * certain PHYs. It would be much nicer if all + * PHYs were interrupt-capable like the internal + * PHY. + * - The ACT LED, which shows adapter activity, is + * driven by the driver, and so must be left on + * for a short period to power up the LED so it + * can be seen. This delay can be changed by + * changing the TLAN_TIMER_ACT_DELAY in tlan.h, + * if desired. 100 ms produces a slightly + * sluggish response. + * + **************************************************************/ + +static void tlan_timer(unsigned long data) { struct net_device *dev = (struct net_device *) data; - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u32 elapsed; unsigned long flags = 0; priv->timer.function = NULL; - switch ( priv->timerType ) { + switch (priv->timer_type) { #ifdef MONITOR - case TLAN_TIMER_LINK_BEAT: - TLan_PhyMonitor( dev ); - break; + case TLAN_TIMER_LINK_BEAT: + tlan_phy_monitor(dev); + break; #endif - case TLAN_TIMER_PHY_PDOWN: - TLan_PhyPowerDown( dev ); - break; - case TLAN_TIMER_PHY_PUP: - TLan_PhyPowerUp( dev ); - break; - case TLAN_TIMER_PHY_RESET: - TLan_PhyReset( dev ); - break; - case TLAN_TIMER_PHY_START_LINK: - TLan_PhyStartLink( dev ); - break; - case TLAN_TIMER_PHY_FINISH_AN: - TLan_PhyFinishAutoNeg( dev ); - break; - case TLAN_TIMER_FINISH_RESET: - TLan_FinishReset( dev ); - break; - case TLAN_TIMER_ACTIVITY: - spin_lock_irqsave(&priv->lock, flags); - if ( priv->timer.function == NULL ) { - elapsed = jiffies - priv->timerSetAt; - if ( elapsed >= TLAN_TIMER_ACT_DELAY ) { - TLan_DioWrite8( dev->base_addr, - TLAN_LED_REG, TLAN_LED_LINK ); - } else { - priv->timer.function = TLan_Timer; - priv->timer.expires = priv->timerSetAt - + TLAN_TIMER_ACT_DELAY; - spin_unlock_irqrestore(&priv->lock, flags); - add_timer( &priv->timer ); - break; - } + case TLAN_TIMER_PHY_PDOWN: + tlan_phy_power_down(dev); + break; + case TLAN_TIMER_PHY_PUP: + tlan_phy_power_up(dev); + break; + case TLAN_TIMER_PHY_RESET: + tlan_phy_reset(dev); + break; + case TLAN_TIMER_PHY_START_LINK: + tlan_phy_start_link(dev); + break; + case TLAN_TIMER_PHY_FINISH_AN: + tlan_phy_finish_auto_neg(dev); + break; + case TLAN_TIMER_FINISH_RESET: + tlan_finish_reset(dev); + break; + case TLAN_TIMER_ACTIVITY: + spin_lock_irqsave(&priv->lock, flags); + if (priv->timer.function == NULL) { + elapsed = jiffies - priv->timer_set_at; + if (elapsed >= TLAN_TIMER_ACT_DELAY) { + tlan_dio_write8(dev->base_addr, + TLAN_LED_REG, TLAN_LED_LINK); + } else { + priv->timer.function = tlan_timer; + priv->timer.expires = priv->timer_set_at + + TLAN_TIMER_ACT_DELAY; + spin_unlock_irqrestore(&priv->lock, flags); + add_timer(&priv->timer); + break; } - spin_unlock_irqrestore(&priv->lock, flags); - break; - default: - break; + } + spin_unlock_irqrestore(&priv->lock, flags); + break; + default: + break; } -} /* TLan_Timer */ +} @@ -1919,39 +1951,39 @@ static void TLan_Timer( unsigned long data ) /***************************************************************************** ****************************************************************************** - ThunderLAN Driver Adapter Related Routines +ThunderLAN driver adapter related routines ****************************************************************************** *****************************************************************************/ - /*************************************************************** - * TLan_ResetLists - * - * Returns: - * Nothing - * Parms: - * dev The device structure with the list - * stuctures to be reset. - * - * This routine sets the variables associated with managing - * the TLAN lists to their initial values. - * - **************************************************************/ - -static void TLan_ResetLists( struct net_device *dev ) +/*************************************************************** + * tlan_reset_lists + * + * Returns: + * Nothing + * Parms: + * dev The device structure with the list + * stuctures to be reset. + * + * This routine sets the variables associated with managing + * the TLAN lists to their initial values. + * + **************************************************************/ + +static void tlan_reset_lists(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); int i; - TLanList *list; + struct tlan_list *list; dma_addr_t list_phys; struct sk_buff *skb; - priv->txHead = 0; - priv->txTail = 0; - for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) { - list = priv->txList + i; - list->cStat = TLAN_CSTAT_UNUSED; + priv->tx_head = 0; + priv->tx_tail = 0; + for (i = 0; i < TLAN_NUM_TX_LISTS; i++) { + list = priv->tx_list + i; + list->c_stat = TLAN_CSTAT_UNUSED; list->buffer[0].address = 0; list->buffer[2].count = 0; list->buffer[2].address = 0; @@ -1959,169 +1991,169 @@ static void TLan_ResetLists( struct net_device *dev ) list->buffer[9].address = 0; } - priv->rxHead = 0; - priv->rxTail = TLAN_NUM_RX_LISTS - 1; - for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) { - list = priv->rxList + i; - list_phys = priv->rxListDMA + sizeof(TLanList) * i; - list->cStat = TLAN_CSTAT_READY; - list->frameSize = TLAN_MAX_FRAME_SIZE; + priv->rx_head = 0; + priv->rx_tail = TLAN_NUM_RX_LISTS - 1; + for (i = 0; i < TLAN_NUM_RX_LISTS; i++) { + list = priv->rx_list + i; + list_phys = priv->rx_list_dma + sizeof(struct tlan_list)*i; + list->c_stat = TLAN_CSTAT_READY; + list->frame_size = TLAN_MAX_FRAME_SIZE; list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER; skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5); - if ( !skb ) { - pr_err("TLAN: out of memory for received data.\n" ); + if (!skb) { + pr_err("TLAN: out of memory for received data.\n"); break; } - list->buffer[0].address = pci_map_single(priv->pciDev, + list->buffer[0].address = pci_map_single(priv->pci_dev, skb->data, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); - TLan_StoreSKB(list, skb); + tlan_store_skb(list, skb); list->buffer[1].count = 0; list->buffer[1].address = 0; - list->forward = list_phys + sizeof(TLanList); + list->forward = list_phys + sizeof(struct tlan_list); } /* in case ran out of memory early, clear bits */ while (i < TLAN_NUM_RX_LISTS) { - TLan_StoreSKB(priv->rxList + i, NULL); + tlan_store_skb(priv->rx_list + i, NULL); ++i; } list->forward = 0; -} /* TLan_ResetLists */ +} -static void TLan_FreeLists( struct net_device *dev ) +static void tlan_free_lists(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); int i; - TLanList *list; + struct tlan_list *list; struct sk_buff *skb; - for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) { - list = priv->txList + i; - skb = TLan_GetSKB(list); - if ( skb ) { + for (i = 0; i < TLAN_NUM_TX_LISTS; i++) { + list = priv->tx_list + i; + skb = tlan_get_skb(list); + if (skb) { pci_unmap_single( - priv->pciDev, + priv->pci_dev, list->buffer[0].address, max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE), PCI_DMA_TODEVICE); - dev_kfree_skb_any( skb ); + dev_kfree_skb_any(skb); list->buffer[8].address = 0; list->buffer[9].address = 0; } } - for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) { - list = priv->rxList + i; - skb = TLan_GetSKB(list); - if ( skb ) { - pci_unmap_single(priv->pciDev, + for (i = 0; i < TLAN_NUM_RX_LISTS; i++) { + list = priv->rx_list + i; + skb = tlan_get_skb(list); + if (skb) { + pci_unmap_single(priv->pci_dev, list->buffer[0].address, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); - dev_kfree_skb_any( skb ); + dev_kfree_skb_any(skb); list->buffer[8].address = 0; list->buffer[9].address = 0; } } -} /* TLan_FreeLists */ +} - /*************************************************************** - * TLan_PrintDio - * - * Returns: - * Nothing - * Parms: - * io_base Base IO port of the device of - * which to print DIO registers. - * - * This function prints out all the internal (DIO) - * registers of a TLAN chip. - * - **************************************************************/ +/*************************************************************** + * tlan_print_dio + * + * Returns: + * Nothing + * Parms: + * io_base Base IO port of the device of + * which to print DIO registers. + * + * This function prints out all the internal (DIO) + * registers of a TLAN chip. + * + **************************************************************/ -static void TLan_PrintDio( u16 io_base ) +static void tlan_print_dio(u16 io_base) { u32 data0, data1; int i; - printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n", - io_base ); - printk( "TLAN: Off. +0 +4\n" ); - for ( i = 0; i < 0x4C; i+= 8 ) { - data0 = TLan_DioRead32( io_base, i ); - data1 = TLan_DioRead32( io_base, i + 0x4 ); - printk( "TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1 ); + pr_info("TLAN: Contents of internal registers for io base 0x%04hx.\n", + io_base); + pr_info("TLAN: Off. +0 +4\n"); + for (i = 0; i < 0x4C; i += 8) { + data0 = tlan_dio_read32(io_base, i); + data1 = tlan_dio_read32(io_base, i + 0x4); + pr_info("TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1); } -} /* TLan_PrintDio */ +} - /*************************************************************** - * TLan_PrintList - * - * Returns: - * Nothing - * Parms: - * list A pointer to the TLanList structure to - * be printed. - * type A string to designate type of list, - * "Rx" or "Tx". - * num The index of the list. - * - * This function prints out the contents of the list - * pointed to by the list parameter. - * - **************************************************************/ +/*************************************************************** + * TLan_PrintList + * + * Returns: + * Nothing + * Parms: + * list A pointer to the struct tlan_list structure to + * be printed. + * type A string to designate type of list, + * "Rx" or "Tx". + * num The index of the list. + * + * This function prints out the contents of the list + * pointed to by the list parameter. + * + **************************************************************/ -static void TLan_PrintList( TLanList *list, char *type, int num) +static void tlan_print_list(struct tlan_list *list, char *type, int num) { int i; - printk( "TLAN: %s List %d at %p\n", type, num, list ); - printk( "TLAN: Forward = 0x%08x\n", list->forward ); - printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat ); - printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize ); - /* for ( i = 0; i < 10; i++ ) { */ - for ( i = 0; i < 2; i++ ) { - printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n", - i, list->buffer[i].count, list->buffer[i].address ); + pr_info("TLAN: %s List %d at %p\n", type, num, list); + pr_info("TLAN: Forward = 0x%08x\n", list->forward); + pr_info("TLAN: CSTAT = 0x%04hx\n", list->c_stat); + pr_info("TLAN: Frame Size = 0x%04hx\n", list->frame_size); + /* for (i = 0; i < 10; i++) { */ + for (i = 0; i < 2; i++) { + pr_info("TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n", + i, list->buffer[i].count, list->buffer[i].address); } -} /* TLan_PrintList */ +} - /*************************************************************** - * TLan_ReadAndClearStats - * - * Returns: - * Nothing - * Parms: - * dev Pointer to device structure of adapter - * to which to read stats. - * record Flag indicating whether to add - * - * This functions reads all the internal status registers - * of the TLAN chip, which clears them as a side effect. - * It then either adds the values to the device's status - * struct, or discards them, depending on whether record - * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0). - * - **************************************************************/ +/*************************************************************** + * tlan_read_and_clear_stats + * + * Returns: + * Nothing + * Parms: + * dev Pointer to device structure of adapter + * to which to read stats. + * record Flag indicating whether to add + * + * This functions reads all the internal status registers + * of the TLAN chip, which clears them as a side effect. + * It then either adds the values to the device's status + * struct, or discards them, depending on whether record + * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0). + * + **************************************************************/ -static void TLan_ReadAndClearStats( struct net_device *dev, int record ) +static void tlan_read_and_clear_stats(struct net_device *dev, int record) { u32 tx_good, tx_under; u32 rx_good, rx_over; @@ -2129,41 +2161,42 @@ static void TLan_ReadAndClearStats( struct net_device *dev, int record ) u32 multi_col, single_col; u32 excess_col, late_col, loss; - outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR ); - tx_good = inb( dev->base_addr + TLAN_DIO_DATA ); - tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8; - tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16; - tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 ); - - outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR ); - rx_good = inb( dev->base_addr + TLAN_DIO_DATA ); - rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8; - rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16; - rx_over = inb( dev->base_addr + TLAN_DIO_DATA + 3 ); - - outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR ); - def_tx = inb( dev->base_addr + TLAN_DIO_DATA ); - def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8; - crc = inb( dev->base_addr + TLAN_DIO_DATA + 2 ); - code = inb( dev->base_addr + TLAN_DIO_DATA + 3 ); - - outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR ); - multi_col = inb( dev->base_addr + TLAN_DIO_DATA ); - multi_col += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8; - single_col = inb( dev->base_addr + TLAN_DIO_DATA + 2 ); - single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8; - - outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR ); - excess_col = inb( dev->base_addr + TLAN_DIO_DATA ); - late_col = inb( dev->base_addr + TLAN_DIO_DATA + 1 ); - loss = inb( dev->base_addr + TLAN_DIO_DATA + 2 ); - - if ( record ) { + outw(TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR); + tx_good = inb(dev->base_addr + TLAN_DIO_DATA); + tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16; + tx_under = inb(dev->base_addr + TLAN_DIO_DATA + 3); + + outw(TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR); + rx_good = inb(dev->base_addr + TLAN_DIO_DATA); + rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16; + rx_over = inb(dev->base_addr + TLAN_DIO_DATA + 3); + + outw(TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR); + def_tx = inb(dev->base_addr + TLAN_DIO_DATA); + def_tx += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + crc = inb(dev->base_addr + TLAN_DIO_DATA + 2); + code = inb(dev->base_addr + TLAN_DIO_DATA + 3); + + outw(TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR); + multi_col = inb(dev->base_addr + TLAN_DIO_DATA); + multi_col += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + single_col = inb(dev->base_addr + TLAN_DIO_DATA + 2); + single_col += inb(dev->base_addr + TLAN_DIO_DATA + 3) << 8; + + outw(TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR); + excess_col = inb(dev->base_addr + TLAN_DIO_DATA); + late_col = inb(dev->base_addr + TLAN_DIO_DATA + 1); + loss = inb(dev->base_addr + TLAN_DIO_DATA + 2); + + if (record) { dev->stats.rx_packets += rx_good; dev->stats.rx_errors += rx_over + crc + code; dev->stats.tx_packets += tx_good; dev->stats.tx_errors += tx_under + loss; - dev->stats.collisions += multi_col + single_col + excess_col + late_col; + dev->stats.collisions += multi_col + + single_col + excess_col + late_col; dev->stats.rx_over_errors += rx_over; dev->stats.rx_crc_errors += crc; @@ -2173,39 +2206,39 @@ static void TLan_ReadAndClearStats( struct net_device *dev, int record ) dev->stats.tx_carrier_errors += loss; } -} /* TLan_ReadAndClearStats */ +} - /*************************************************************** - * TLan_Reset - * - * Returns: - * 0 - * Parms: - * dev Pointer to device structure of adapter - * to be reset. - * - * This function resets the adapter and it's physical - * device. See Chap. 3, pp. 9-10 of the "ThunderLAN - * Programmer's Guide" for details. The routine tries to - * implement what is detailed there, though adjustments - * have been made. - * - **************************************************************/ +/*************************************************************** + * TLan_Reset + * + * Returns: + * 0 + * Parms: + * dev Pointer to device structure of adapter + * to be reset. + * + * This function resets the adapter and it's physical + * device. See Chap. 3, pp. 9-10 of the "ThunderLAN + * Programmer's Guide" for details. The routine tries to + * implement what is detailed there, though adjustments + * have been made. + * + **************************************************************/ static void -TLan_ResetAdapter( struct net_device *dev ) +tlan_reset_adapter(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); int i; u32 addr; u32 data; u8 data8; - priv->tlanFullDuplex = false; - priv->phyOnline=0; + priv->tlan_full_duplex = false; + priv->phy_online = 0; netif_carrier_off(dev); /* 1. Assert reset bit. */ @@ -2216,7 +2249,7 @@ TLan_ResetAdapter( struct net_device *dev ) udelay(1000); -/* 2. Turn off interrupts. ( Probably isn't necessary ) */ +/* 2. Turn off interrupts. (Probably isn't necessary) */ data = inl(dev->base_addr + TLAN_HOST_CMD); data |= TLAN_HC_INT_OFF; @@ -2224,207 +2257,208 @@ TLan_ResetAdapter( struct net_device *dev ) /* 3. Clear AREGs and HASHs. */ - for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) { - TLan_DioWrite32( dev->base_addr, (u16) i, 0 ); - } + for (i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4) + tlan_dio_write32(dev->base_addr, (u16) i, 0); /* 4. Setup NetConfig register. */ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN; - TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data ); + tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data); /* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */ - outl( TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD ); - outl( TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD ); + outl(TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD); + outl(TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD); /* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */ - outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR ); + outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; - TLan_SetBit( TLAN_NET_SIO_NMRST, addr ); + tlan_set_bit(TLAN_NET_SIO_NMRST, addr); /* 7. Setup the remaining registers. */ - if ( priv->tlanRev >= 0x30 ) { + if (priv->tlan_rev >= 0x30) { data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC; - TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 ); + tlan_dio_write8(dev->base_addr, TLAN_INT_DIS, data8); } - TLan_PhyDetect( dev ); + tlan_phy_detect(dev); data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN; - if ( priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY ) { + if (priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY) { data |= TLAN_NET_CFG_BIT; - if ( priv->aui == 1 ) { - TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a ); - } else if ( priv->duplex == TLAN_DUPLEX_FULL ) { - TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 ); - priv->tlanFullDuplex = true; + if (priv->aui == 1) { + tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x0a); + } else if (priv->duplex == TLAN_DUPLEX_FULL) { + tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x00); + priv->tlan_full_duplex = true; } else { - TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 ); + tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x08); } } - if ( priv->phyNum == 0 ) { + if (priv->phy_num == 0) data |= TLAN_NET_CFG_PHY_EN; - } - TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data ); + tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data); - if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) { - TLan_FinishReset( dev ); - } else { - TLan_PhyPowerDown( dev ); - } + if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) + tlan_finish_reset(dev); + else + tlan_phy_power_down(dev); -} /* TLan_ResetAdapter */ +} static void -TLan_FinishReset( struct net_device *dev ) +tlan_finish_reset(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u8 data; u32 phy; u8 sio; u16 status; u16 partner; u16 tlphy_ctl; - u16 tlphy_par; + u16 tlphy_par; u16 tlphy_id1, tlphy_id2; - int i; + int i; - phy = priv->phy[priv->phyNum]; + phy = priv->phy[priv->phy_num]; data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP; - if ( priv->tlanFullDuplex ) { + if (priv->tlan_full_duplex) data |= TLAN_NET_CMD_DUPLEX; - } - TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data ); + tlan_dio_write8(dev->base_addr, TLAN_NET_CMD, data); data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5; - if ( priv->phyNum == 0 ) { + if (priv->phy_num == 0) data |= TLAN_NET_MASK_MASK7; - } - TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data ); - TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7 ); - TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 ); - TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 ); + tlan_dio_write8(dev->base_addr, TLAN_NET_MASK, data); + tlan_dio_write16(dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &tlphy_id1); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &tlphy_id2); - if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) || - ( priv->aui ) ) { + if ((priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) || + (priv->aui)) { status = MII_GS_LINK; - printk( "TLAN: %s: Link forced.\n", dev->name ); + pr_info("TLAN: %s: Link forced.\n", dev->name); } else { - TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status ); - udelay( 1000 ); - TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status ); - if ( (status & MII_GS_LINK) && - /* We only support link info on Nat.Sem. PHY's */ - (tlphy_id1 == NAT_SEM_ID1) && - (tlphy_id2 == NAT_SEM_ID2) ) { - TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner ); - TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par ); - - printk( "TLAN: %s: Link active with ", dev->name ); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + udelay(1000); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + if ((status & MII_GS_LINK) && + /* We only support link info on Nat.Sem. PHY's */ + (tlphy_id1 == NAT_SEM_ID1) && + (tlphy_id2 == NAT_SEM_ID2)) { + tlan_mii_read_reg(dev, phy, MII_AN_LPA, &partner); + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR, &tlphy_par); + + pr_info("TLAN: %s: Link active with ", dev->name); if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) { - printk( "forced 10%sMbps %s-Duplex\n", - tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0", - tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half"); + pr_info("forced 10%sMbps %s-Duplex\n", + tlphy_par & TLAN_PHY_SPEED_100 + ? "" : "0", + tlphy_par & TLAN_PHY_DUPLEX_FULL + ? "Full" : "Half"); } else { - printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n", - tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0", - tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half"); - printk("TLAN: Partner capability: "); - for (i = 5; i <= 10; i++) - if (partner & (1<base_addr, TLAN_LED_REG, TLAN_LED_LINK ); + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, + TLAN_LED_LINK); #ifdef MONITOR /* We have link beat..for now anyway */ - priv->link = 1; - /*Enabling link beat monitoring */ - TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT ); + priv->link = 1; + /*Enabling link beat monitoring */ + tlan_set_timer(dev, (10*HZ), TLAN_TIMER_LINK_BEAT); #endif } else if (status & MII_GS_LINK) { - printk( "TLAN: %s: Link active\n", dev->name ); - TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK ); + pr_info("TLAN: %s: Link active\n", dev->name); + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, + TLAN_LED_LINK); } } - if ( priv->phyNum == 0 ) { - TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl ); - tlphy_ctl |= TLAN_TC_INTEN; - TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl ); - sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO ); - sio |= TLAN_NET_SIO_MINTEN; - TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio ); - } - - if ( status & MII_GS_LINK ) { - TLan_SetMac( dev, 0, dev->dev_addr ); - priv->phyOnline = 1; - outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 ); - if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) { - outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 ); - } - outl( priv->rxListDMA, dev->base_addr + TLAN_CH_PARM ); - outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD ); + if (priv->phy_num == 0) { + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl); + tlphy_ctl |= TLAN_TC_INTEN; + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tlphy_ctl); + sio = tlan_dio_read8(dev->base_addr, TLAN_NET_SIO); + sio |= TLAN_NET_SIO_MINTEN; + tlan_dio_write8(dev->base_addr, TLAN_NET_SIO, sio); + } + + if (status & MII_GS_LINK) { + tlan_set_mac(dev, 0, dev->dev_addr); + priv->phy_online = 1; + outb((TLAN_HC_INT_ON >> 8), dev->base_addr + TLAN_HOST_CMD + 1); + if (debug >= 1 && debug != TLAN_DEBUG_PROBE) + outb((TLAN_HC_REQ_INT >> 8), + dev->base_addr + TLAN_HOST_CMD + 1); + outl(priv->rx_list_dma, dev->base_addr + TLAN_CH_PARM); + outl(TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD); netif_carrier_on(dev); } else { - printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n", - dev->name ); - TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET ); + pr_info("TLAN: %s: Link inactive, will retry in 10 secs...\n", + dev->name); + tlan_set_timer(dev, (10*HZ), TLAN_TIMER_FINISH_RESET); return; } - TLan_SetMulticastList(dev); + tlan_set_multicast_list(dev); -} /* TLan_FinishReset */ +} - /*************************************************************** - * TLan_SetMac - * - * Returns: - * Nothing - * Parms: - * dev Pointer to device structure of adapter - * on which to change the AREG. - * areg The AREG to set the address in (0 - 3). - * mac A pointer to an array of chars. Each - * element stores one byte of the address. - * IE, it isn't in ascii. - * - * This function transfers a MAC address to one of the - * TLAN AREGs (address registers). The TLAN chip locks - * the register on writing to offset 0 and unlocks the - * register after writing to offset 5. If NULL is passed - * in mac, then the AREG is filled with 0's. - * - **************************************************************/ +/*************************************************************** + * tlan_set_mac + * + * Returns: + * Nothing + * Parms: + * dev Pointer to device structure of adapter + * on which to change the AREG. + * areg The AREG to set the address in (0 - 3). + * mac A pointer to an array of chars. Each + * element stores one byte of the address. + * IE, it isn't in ascii. + * + * This function transfers a MAC address to one of the + * TLAN AREGs (address registers). The TLAN chip locks + * the register on writing to offset 0 and unlocks the + * register after writing to offset 5. If NULL is passed + * in mac, then the AREG is filled with 0's. + * + **************************************************************/ -static void TLan_SetMac( struct net_device *dev, int areg, char *mac ) +static void tlan_set_mac(struct net_device *dev, int areg, char *mac) { int i; areg *= 6; - if ( mac != NULL ) { - for ( i = 0; i < 6; i++ ) - TLan_DioWrite8( dev->base_addr, - TLAN_AREG_0 + areg + i, mac[i] ); + if (mac != NULL) { + for (i = 0; i < 6; i++) + tlan_dio_write8(dev->base_addr, + TLAN_AREG_0 + areg + i, mac[i]); } else { - for ( i = 0; i < 6; i++ ) - TLan_DioWrite8( dev->base_addr, - TLAN_AREG_0 + areg + i, 0 ); + for (i = 0; i < 6; i++) + tlan_dio_write8(dev->base_addr, + TLAN_AREG_0 + areg + i, 0); } -} /* TLan_SetMac */ +} @@ -2432,205 +2466,202 @@ static void TLan_SetMac( struct net_device *dev, int areg, char *mac ) /***************************************************************************** ****************************************************************************** - ThunderLAN Driver PHY Layer Routines +ThunderLAN driver PHY layer routines ****************************************************************************** *****************************************************************************/ - /********************************************************************* - * TLan_PhyPrint - * - * Returns: - * Nothing - * Parms: - * dev A pointer to the device structure of the - * TLAN device having the PHYs to be detailed. - * - * This function prints the registers a PHY (aka transceiver). - * - ********************************************************************/ +/********************************************************************* + * tlan_phy_print + * + * Returns: + * Nothing + * Parms: + * dev A pointer to the device structure of the + * TLAN device having the PHYs to be detailed. + * + * This function prints the registers a PHY (aka transceiver). + * + ********************************************************************/ -static void TLan_PhyPrint( struct net_device *dev ) +static void tlan_phy_print(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 i, data0, data1, data2, data3, phy; - phy = priv->phy[priv->phyNum]; - - if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) { - printk( "TLAN: Device %s, Unmanaged PHY.\n", dev->name ); - } else if ( phy <= TLAN_PHY_MAX_ADDR ) { - printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy ); - printk( "TLAN: Off. +0 +1 +2 +3\n" ); - for ( i = 0; i < 0x20; i+= 4 ) { - printk( "TLAN: 0x%02x", i ); - TLan_MiiReadReg( dev, phy, i, &data0 ); - printk( " 0x%04hx", data0 ); - TLan_MiiReadReg( dev, phy, i + 1, &data1 ); - printk( " 0x%04hx", data1 ); - TLan_MiiReadReg( dev, phy, i + 2, &data2 ); - printk( " 0x%04hx", data2 ); - TLan_MiiReadReg( dev, phy, i + 3, &data3 ); - printk( " 0x%04hx\n", data3 ); + phy = priv->phy[priv->phy_num]; + + if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) { + pr_info("TLAN: Device %s, Unmanaged PHY.\n", dev->name); + } else if (phy <= TLAN_PHY_MAX_ADDR) { + pr_info("TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy); + pr_info("TLAN: Off. +0 +1 +2 +3\n"); + for (i = 0; i < 0x20; i += 4) { + pr_info("TLAN: 0x%02x", i); + tlan_mii_read_reg(dev, phy, i, &data0); + printk(" 0x%04hx", data0); + tlan_mii_read_reg(dev, phy, i + 1, &data1); + printk(" 0x%04hx", data1); + tlan_mii_read_reg(dev, phy, i + 2, &data2); + printk(" 0x%04hx", data2); + tlan_mii_read_reg(dev, phy, i + 3, &data3); + printk(" 0x%04hx\n", data3); } } else { - printk( "TLAN: Device %s, Invalid PHY.\n", dev->name ); + pr_info("TLAN: Device %s, Invalid PHY.\n", dev->name); } -} /* TLan_PhyPrint */ +} - /********************************************************************* - * TLan_PhyDetect - * - * Returns: - * Nothing - * Parms: - * dev A pointer to the device structure of the adapter - * for which the PHY needs determined. - * - * So far I've found that adapters which have external PHYs - * may also use the internal PHY for part of the functionality. - * (eg, AUI/Thinnet). This function finds out if this TLAN - * chip has an internal PHY, and then finds the first external - * PHY (starting from address 0) if it exists). - * - ********************************************************************/ +/********************************************************************* + * tlan_phy_detect + * + * Returns: + * Nothing + * Parms: + * dev A pointer to the device structure of the adapter + * for which the PHY needs determined. + * + * So far I've found that adapters which have external PHYs + * may also use the internal PHY for part of the functionality. + * (eg, AUI/Thinnet). This function finds out if this TLAN + * chip has an internal PHY, and then finds the first external + * PHY (starting from address 0) if it exists). + * + ********************************************************************/ -static void TLan_PhyDetect( struct net_device *dev ) +static void tlan_phy_detect(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 control; u16 hi; u16 lo; u32 phy; - if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) { - priv->phyNum = 0xFFFF; + if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) { + priv->phy_num = 0xffff; return; } - TLan_MiiReadReg( dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi ); + tlan_mii_read_reg(dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi); - if ( hi != 0xFFFF ) { + if (hi != 0xffff) priv->phy[0] = TLAN_PHY_MAX_ADDR; - } else { + else priv->phy[0] = TLAN_PHY_NONE; - } priv->phy[1] = TLAN_PHY_NONE; - for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) { - TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control ); - TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi ); - TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo ); - if ( ( control != 0xFFFF ) || - ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) { - TLAN_DBG( TLAN_DEBUG_GNRL, - "PHY found at %02x %04x %04x %04x\n", - phy, control, hi, lo ); - if ( ( priv->phy[1] == TLAN_PHY_NONE ) && - ( phy != TLAN_PHY_MAX_ADDR ) ) { + for (phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++) { + tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &control); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &hi); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &lo); + if ((control != 0xffff) || + (hi != 0xffff) || (lo != 0xffff)) { + TLAN_DBG(TLAN_DEBUG_GNRL, + "PHY found at %02x %04x %04x %04x\n", + phy, control, hi, lo); + if ((priv->phy[1] == TLAN_PHY_NONE) && + (phy != TLAN_PHY_MAX_ADDR)) { priv->phy[1] = phy; } } } - if ( priv->phy[1] != TLAN_PHY_NONE ) { - priv->phyNum = 1; - } else if ( priv->phy[0] != TLAN_PHY_NONE ) { - priv->phyNum = 0; - } else { - printk( "TLAN: Cannot initialize device, no PHY was found!\n" ); - } + if (priv->phy[1] != TLAN_PHY_NONE) + priv->phy_num = 1; + else if (priv->phy[0] != TLAN_PHY_NONE) + priv->phy_num = 0; + else + pr_info("TLAN: Cannot initialize device, no PHY was found!\n"); -} /* TLan_PhyDetect */ +} -static void TLan_PhyPowerDown( struct net_device *dev ) +static void tlan_phy_power_down(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 value; - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name ); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name); value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE; - TLan_MiiSync( dev->base_addr ); - TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value ); - if ( ( priv->phyNum == 0 ) && - ( priv->phy[1] != TLAN_PHY_NONE ) && - ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) { - TLan_MiiSync( dev->base_addr ); - TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value ); + tlan_mii_sync(dev->base_addr); + tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value); + if ((priv->phy_num == 0) && + (priv->phy[1] != TLAN_PHY_NONE) && + (!(priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10))) { + tlan_mii_sync(dev->base_addr); + tlan_mii_write_reg(dev, priv->phy[1], MII_GEN_CTL, value); } /* Wait for 50 ms and powerup * This is abitrary. It is intended to make sure the * transceiver settles. */ - TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP ); + tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_PUP); -} /* TLan_PhyPowerDown */ +} -static void TLan_PhyPowerUp( struct net_device *dev ) +static void tlan_phy_power_up(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 value; - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name ); - TLan_MiiSync( dev->base_addr ); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name); + tlan_mii_sync(dev->base_addr); value = MII_GC_LOOPBK; - TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value ); - TLan_MiiSync(dev->base_addr); + tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value); + tlan_mii_sync(dev->base_addr); /* Wait for 500 ms and reset the * transceiver. The TLAN docs say both 50 ms and * 500 ms, so do the longer, just in case. */ - TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET ); + tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_RESET); -} /* TLan_PhyPowerUp */ +} -static void TLan_PhyReset( struct net_device *dev ) +static void tlan_phy_reset(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 phy; u16 value; - phy = priv->phy[priv->phyNum]; + phy = priv->phy[priv->phy_num]; - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name ); - TLan_MiiSync( dev->base_addr ); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name); + tlan_mii_sync(dev->base_addr); value = MII_GC_LOOPBK | MII_GC_RESET; - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, value ); - TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value ); - while ( value & MII_GC_RESET ) { - TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value ); - } + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, value); + tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value); + while (value & MII_GC_RESET) + tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value); /* Wait for 500 ms and initialize. * I don't remember why I wait this long. * I've changed this to 50ms, as it seems long enough. */ - TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK ); + tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_START_LINK); -} /* TLan_PhyReset */ +} -static void TLan_PhyStartLink( struct net_device *dev ) +static void tlan_phy_start_link(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 ability; u16 control; u16 data; @@ -2638,86 +2669,88 @@ static void TLan_PhyStartLink( struct net_device *dev ) u16 status; u16 tctl; - phy = priv->phy[priv->phyNum]; - TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name ); - TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status ); - TLan_MiiReadReg( dev, phy, MII_GEN_STS, &ability ); + phy = priv->phy[priv->phy_num]; + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &ability); - if ( ( status & MII_GS_AUTONEG ) && - ( ! priv->aui ) ) { + if ((status & MII_GS_AUTONEG) && + (!priv->aui)) { ability = status >> 11; - if ( priv->speed == TLAN_SPEED_10 && - priv->duplex == TLAN_DUPLEX_HALF) { - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000); - } else if ( priv->speed == TLAN_SPEED_10 && - priv->duplex == TLAN_DUPLEX_FULL) { - priv->tlanFullDuplex = true; - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100); - } else if ( priv->speed == TLAN_SPEED_100 && - priv->duplex == TLAN_DUPLEX_HALF) { - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000); - } else if ( priv->speed == TLAN_SPEED_100 && - priv->duplex == TLAN_DUPLEX_FULL) { - priv->tlanFullDuplex = true; - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100); + if (priv->speed == TLAN_SPEED_10 && + priv->duplex == TLAN_DUPLEX_HALF) { + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0000); + } else if (priv->speed == TLAN_SPEED_10 && + priv->duplex == TLAN_DUPLEX_FULL) { + priv->tlan_full_duplex = true; + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0100); + } else if (priv->speed == TLAN_SPEED_100 && + priv->duplex == TLAN_DUPLEX_HALF) { + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2000); + } else if (priv->speed == TLAN_SPEED_100 && + priv->duplex == TLAN_DUPLEX_FULL) { + priv->tlan_full_duplex = true; + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2100); } else { /* Set Auto-Neg advertisement */ - TLan_MiiWriteReg( dev, phy, MII_AN_ADV, (ability << 5) | 1); + tlan_mii_write_reg(dev, phy, MII_AN_ADV, + (ability << 5) | 1); /* Enablee Auto-Neg */ - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1000 ); + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1000); /* Restart Auto-Neg */ - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1200 ); + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1200); /* Wait for 4 sec for autonegotiation - * to complete. The max spec time is less than this - * but the card need additional time to start AN. - * .5 sec should be plenty extra. - */ - printk( "TLAN: %s: Starting autonegotiation.\n", dev->name ); - TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN ); + * to complete. The max spec time is less than this + * but the card need additional time to start AN. + * .5 sec should be plenty extra. + */ + pr_info("TLAN: %s: Starting autonegotiation.\n", + dev->name); + tlan_set_timer(dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN); return; } } - if ( ( priv->aui ) && ( priv->phyNum != 0 ) ) { - priv->phyNum = 0; - data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN; - TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data ); - TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN ); + if ((priv->aui) && (priv->phy_num != 0)) { + priv->phy_num = 0; + data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN + | TLAN_NET_CFG_PHY_EN; + tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data); + tlan_set_timer(dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN); return; - } else if ( priv->phyNum == 0 ) { + } else if (priv->phy_num == 0) { control = 0; - TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tctl ); - if ( priv->aui ) { - tctl |= TLAN_TC_AUISEL; + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tctl); + if (priv->aui) { + tctl |= TLAN_TC_AUISEL; } else { - tctl &= ~TLAN_TC_AUISEL; - if ( priv->duplex == TLAN_DUPLEX_FULL ) { + tctl &= ~TLAN_TC_AUISEL; + if (priv->duplex == TLAN_DUPLEX_FULL) { control |= MII_GC_DUPLEX; - priv->tlanFullDuplex = true; + priv->tlan_full_duplex = true; } - if ( priv->speed == TLAN_SPEED_100 ) { + if (priv->speed == TLAN_SPEED_100) control |= MII_GC_SPEEDSEL; - } } - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, control ); - TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tctl ); + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, control); + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tctl); } /* Wait for 2 sec to give the transceiver time * to establish link. */ - TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET ); + tlan_set_timer(dev, (4*HZ), TLAN_TIMER_FINISH_RESET); -} /* TLan_PhyStartLink */ +} -static void TLan_PhyFinishAutoNeg( struct net_device *dev ) +static void tlan_phy_finish_auto_neg(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 an_adv; u16 an_lpa; u16 data; @@ -2725,115 +2758,118 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev ) u16 phy; u16 status; - phy = priv->phy[priv->phyNum]; + phy = priv->phy[priv->phy_num]; - TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status ); - udelay( 1000 ); - TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status ); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + udelay(1000); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); - if ( ! ( status & MII_GS_AUTOCMPLT ) ) { + if (!(status & MII_GS_AUTOCMPLT)) { /* Wait for 8 sec to give the process * more time. Perhaps we should fail after a while. */ - if (!priv->neg_be_verbose++) { - pr_info("TLAN: Giving autonegotiation more time.\n"); - pr_info("TLAN: Please check that your adapter has\n"); - pr_info("TLAN: been properly connected to a HUB or Switch.\n"); - pr_info("TLAN: Trying to establish link in the background...\n"); - } - TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN ); + if (!priv->neg_be_verbose++) { + pr_info("TLAN: Giving autonegotiation more time.\n"); + pr_info("TLAN: Please check that your adapter has\n"); + pr_info("TLAN: been properly connected to a HUB or Switch.\n"); + pr_info("TLAN: Trying to establish link in the background...\n"); + } + tlan_set_timer(dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN); return; } - printk( "TLAN: %s: Autonegotiation complete.\n", dev->name ); - TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv ); - TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa ); + pr_info("TLAN: %s: Autonegotiation complete.\n", dev->name); + tlan_mii_read_reg(dev, phy, MII_AN_ADV, &an_adv); + tlan_mii_read_reg(dev, phy, MII_AN_LPA, &an_lpa); mode = an_adv & an_lpa & 0x03E0; - if ( mode & 0x0100 ) { - priv->tlanFullDuplex = true; - } else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) { - priv->tlanFullDuplex = true; - } - - if ( ( ! ( mode & 0x0180 ) ) && - ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) && - ( priv->phyNum != 0 ) ) { - priv->phyNum = 0; - data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN; - TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data ); - TLan_SetTimer( dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN ); + if (mode & 0x0100) + priv->tlan_full_duplex = true; + else if (!(mode & 0x0080) && (mode & 0x0040)) + priv->tlan_full_duplex = true; + + if ((!(mode & 0x0180)) && + (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) && + (priv->phy_num != 0)) { + priv->phy_num = 0; + data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN + | TLAN_NET_CFG_PHY_EN; + tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data); + tlan_set_timer(dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN); return; } - if ( priv->phyNum == 0 ) { - if ( ( priv->duplex == TLAN_DUPLEX_FULL ) || - ( an_adv & an_lpa & 0x0040 ) ) { - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, - MII_GC_AUTOENB | MII_GC_DUPLEX ); - pr_info("TLAN: Starting internal PHY with FULL-DUPLEX\n" ); + if (priv->phy_num == 0) { + if ((priv->duplex == TLAN_DUPLEX_FULL) || + (an_adv & an_lpa & 0x0040)) { + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, + MII_GC_AUTOENB | MII_GC_DUPLEX); + pr_info("TLAN: Starting internal PHY with FULL-DUPLEX\n"); } else { - TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB ); - pr_info( "TLAN: Starting internal PHY with HALF-DUPLEX\n" ); + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, + MII_GC_AUTOENB); + pr_info("TLAN: Starting internal PHY with HALF-DUPLEX\n"); } } /* Wait for 100 ms. No reason in partiticular. */ - TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET ); + tlan_set_timer(dev, (HZ/10), TLAN_TIMER_FINISH_RESET); -} /* TLan_PhyFinishAutoNeg */ +} #ifdef MONITOR - /********************************************************************* - * - * TLan_phyMonitor - * - * Returns: - * None - * - * Params: - * dev The device structure of this device. - * - * - * This function monitors PHY condition by reading the status - * register via the MII bus. This can be used to give info - * about link changes (up/down), and possible switch to alternate - * media. - * - * ******************************************************************/ - -void TLan_PhyMonitor( struct net_device *dev ) +/********************************************************************* + * + * tlan_phy_monitor + * + * Returns: + * None + * + * Params: + * dev The device structure of this device. + * + * + * This function monitors PHY condition by reading the status + * register via the MII bus. This can be used to give info + * about link changes (up/down), and possible switch to alternate + * media. + * + *******************************************************************/ + +void tlan_phy_monitor(struct net_device *dev) { - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); u16 phy; u16 phy_status; - phy = priv->phy[priv->phyNum]; + phy = priv->phy[priv->phy_num]; - /* Get PHY status register */ - TLan_MiiReadReg( dev, phy, MII_GEN_STS, &phy_status ); + /* Get PHY status register */ + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &phy_status); - /* Check if link has been lost */ - if (!(phy_status & MII_GS_LINK)) { - if (priv->link) { - priv->link = 0; - printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name); - netif_carrier_off(dev); - TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT ); - return; + /* Check if link has been lost */ + if (!(phy_status & MII_GS_LINK)) { + if (priv->link) { + priv->link = 0; + printk(KERN_DEBUG "TLAN: %s has lost link\n", + dev->name); + netif_carrier_off(dev); + tlan_set_timer(dev, (2*HZ), TLAN_TIMER_LINK_BEAT); + return; } } - /* Link restablished? */ - if ((phy_status & MII_GS_LINK) && !priv->link) { - priv->link = 1; - printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name); + /* Link restablished? */ + if ((phy_status & MII_GS_LINK) && !priv->link) { + priv->link = 1; + printk(KERN_DEBUG "TLAN: %s has reestablished link\n", + dev->name); netif_carrier_on(dev); - } + } /* Setup a new monitor */ - TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT ); + tlan_set_timer(dev, (2*HZ), TLAN_TIMER_LINK_BEAT); } #endif /* MONITOR */ @@ -2842,47 +2878,48 @@ void TLan_PhyMonitor( struct net_device *dev ) /***************************************************************************** ****************************************************************************** - ThunderLAN Driver MII Routines +ThunderLAN driver MII routines - These routines are based on the information in Chap. 2 of the - "ThunderLAN Programmer's Guide", pp. 15-24. +these routines are based on the information in chap. 2 of the +"ThunderLAN Programmer's Guide", pp. 15-24. ****************************************************************************** *****************************************************************************/ - /*************************************************************** - * TLan_MiiReadReg - * - * Returns: - * false if ack received ok - * true if no ack received or other error - * - * Parms: - * dev The device structure containing - * The io address and interrupt count - * for this device. - * phy The address of the PHY to be queried. - * reg The register whose contents are to be - * retrieved. - * val A pointer to a variable to store the - * retrieved value. - * - * This function uses the TLAN's MII bus to retrieve the contents - * of a given register on a PHY. It sends the appropriate info - * and then reads the 16-bit register value from the MII bus via - * the TLAN SIO register. - * - **************************************************************/ - -static bool TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) +/*************************************************************** + * tlan_mii_read_reg + * + * Returns: + * false if ack received ok + * true if no ack received or other error + * + * Parms: + * dev The device structure containing + * The io address and interrupt count + * for this device. + * phy The address of the PHY to be queried. + * reg The register whose contents are to be + * retrieved. + * val A pointer to a variable to store the + * retrieved value. + * + * This function uses the TLAN's MII bus to retrieve the contents + * of a given register on a PHY. It sends the appropriate info + * and then reads the 16-bit register value from the MII bus via + * the TLAN SIO register. + * + **************************************************************/ + +static bool +tlan_mii_read_reg(struct net_device *dev, u16 phy, u16 reg, u16 *val) { u8 nack; u16 sio, tmp; - u32 i; + u32 i; bool err; int minten; - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); unsigned long flags = 0; err = false; @@ -2892,48 +2929,48 @@ static bool TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val if (!in_irq()) spin_lock_irqsave(&priv->lock, flags); - TLan_MiiSync(dev->base_addr); + tlan_mii_sync(dev->base_addr); - minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio ); - if ( minten ) - TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio); + minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio); + if (minten) + tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio); - TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */ - TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Read ( 10b ) */ - TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */ - TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */ + tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */ + tlan_mii_send_data(dev->base_addr, 0x2, 2); /* read (10b) */ + tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */ + tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */ - TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio); /* Change direction */ + tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); /* change direction */ - TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Clock Idle bit */ - TLan_SetBit(TLAN_NET_SIO_MCLK, sio); - TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Wait 300ns */ + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* clock idle bit */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* wait 300ns */ - nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio); /* Check for ACK */ - TLan_SetBit(TLAN_NET_SIO_MCLK, sio); /* Finish ACK */ - if (nack) { /* No ACK, so fake it */ + nack = tlan_get_bit(TLAN_NET_SIO_MDATA, sio); /* check for ACK */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); /* finish ACK */ + if (nack) { /* no ACK, so fake it */ for (i = 0; i < 16; i++) { - TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); - TLan_SetBit(TLAN_NET_SIO_MCLK, sio); + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); } tmp = 0xffff; err = true; } else { /* ACK, so read data */ for (tmp = 0, i = 0x8000; i; i >>= 1) { - TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); - if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio)) + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + if (tlan_get_bit(TLAN_NET_SIO_MDATA, sio)) tmp |= i; - TLan_SetBit(TLAN_NET_SIO_MCLK, sio); + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); } } - TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Idle cycle */ - TLan_SetBit(TLAN_NET_SIO_MCLK, sio); + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); - if ( minten ) - TLan_SetBit(TLAN_NET_SIO_MINTEN, sio); + if (minten) + tlan_set_bit(TLAN_NET_SIO_MINTEN, sio); *val = tmp; @@ -2942,116 +2979,117 @@ static bool TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val return err; -} /* TLan_MiiReadReg */ +} - /*************************************************************** - * TLan_MiiSendData - * - * Returns: - * Nothing - * Parms: - * base_port The base IO port of the adapter in - * question. - * dev The address of the PHY to be queried. - * data The value to be placed on the MII bus. - * num_bits The number of bits in data that are to - * be placed on the MII bus. - * - * This function sends on sequence of bits on the MII - * configuration bus. - * - **************************************************************/ +/*************************************************************** + * tlan_mii_send_data + * + * Returns: + * Nothing + * Parms: + * base_port The base IO port of the adapter in + * question. + * dev The address of the PHY to be queried. + * data The value to be placed on the MII bus. + * num_bits The number of bits in data that are to + * be placed on the MII bus. + * + * This function sends on sequence of bits on the MII + * configuration bus. + * + **************************************************************/ -static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) +static void tlan_mii_send_data(u16 base_port, u32 data, unsigned num_bits) { u16 sio; u32 i; - if ( num_bits == 0 ) + if (num_bits == 0) return; - outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR ); + outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR); sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO; - TLan_SetBit( TLAN_NET_SIO_MTXEN, sio ); + tlan_set_bit(TLAN_NET_SIO_MTXEN, sio); - for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) { - TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); - (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio ); - if ( data & i ) - TLan_SetBit( TLAN_NET_SIO_MDATA, sio ); + for (i = (0x1 << (num_bits - 1)); i; i >>= 1) { + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio); + if (data & i) + tlan_set_bit(TLAN_NET_SIO_MDATA, sio); else - TLan_ClearBit( TLAN_NET_SIO_MDATA, sio ); - TLan_SetBit( TLAN_NET_SIO_MCLK, sio ); - (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio ); + tlan_clear_bit(TLAN_NET_SIO_MDATA, sio); + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio); } -} /* TLan_MiiSendData */ +} - /*************************************************************** - * TLan_MiiSync - * - * Returns: - * Nothing - * Parms: - * base_port The base IO port of the adapter in - * question. - * - * This functions syncs all PHYs in terms of the MII configuration - * bus. - * - **************************************************************/ +/*************************************************************** + * TLan_MiiSync + * + * Returns: + * Nothing + * Parms: + * base_port The base IO port of the adapter in + * question. + * + * This functions syncs all PHYs in terms of the MII configuration + * bus. + * + **************************************************************/ -static void TLan_MiiSync( u16 base_port ) +static void tlan_mii_sync(u16 base_port) { int i; u16 sio; - outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR ); + outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR); sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO; - TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio ); - for ( i = 0; i < 32; i++ ) { - TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); - TLan_SetBit( TLAN_NET_SIO_MCLK, sio ); + tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); + for (i = 0; i < 32; i++) { + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); } -} /* TLan_MiiSync */ +} - /*************************************************************** - * TLan_MiiWriteReg - * - * Returns: - * Nothing - * Parms: - * dev The device structure for the device - * to write to. - * phy The address of the PHY to be written to. - * reg The register whose contents are to be - * written. - * val The value to be written to the register. - * - * This function uses the TLAN's MII bus to write the contents of a - * given register on a PHY. It sends the appropriate info and then - * writes the 16-bit register value from the MII configuration bus - * via the TLAN SIO register. - * - **************************************************************/ +/*************************************************************** + * tlan_mii_write_reg + * + * Returns: + * Nothing + * Parms: + * dev The device structure for the device + * to write to. + * phy The address of the PHY to be written to. + * reg The register whose contents are to be + * written. + * val The value to be written to the register. + * + * This function uses the TLAN's MII bus to write the contents of a + * given register on a PHY. It sends the appropriate info and then + * writes the 16-bit register value from the MII configuration bus + * via the TLAN SIO register. + * + **************************************************************/ -static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) +static void +tlan_mii_write_reg(struct net_device *dev, u16 phy, u16 reg, u16 val) { u16 sio; int minten; unsigned long flags = 0; - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; @@ -3059,30 +3097,30 @@ static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val if (!in_irq()) spin_lock_irqsave(&priv->lock, flags); - TLan_MiiSync( dev->base_addr ); + tlan_mii_sync(dev->base_addr); - minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio ); - if ( minten ) - TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio ); + minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio); + if (minten) + tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio); - TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */ - TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Write ( 01b ) */ - TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */ - TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */ + tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */ + tlan_mii_send_data(dev->base_addr, 0x1, 2); /* write (01b) */ + tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */ + tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */ - TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Send ACK */ - TLan_MiiSendData( dev->base_addr, val, 16 ); /* Send Data */ + tlan_mii_send_data(dev->base_addr, 0x2, 2); /* send ACK */ + tlan_mii_send_data(dev->base_addr, val, 16); /* send data */ - TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); /* Idle cycle */ - TLan_SetBit( TLAN_NET_SIO_MCLK, sio ); + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); - if ( minten ) - TLan_SetBit( TLAN_NET_SIO_MINTEN, sio ); + if (minten) + tlan_set_bit(TLAN_NET_SIO_MINTEN, sio); if (!in_irq()) spin_unlock_irqrestore(&priv->lock, flags); -} /* TLan_MiiWriteReg */ +} @@ -3090,229 +3128,226 @@ static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val /***************************************************************************** ****************************************************************************** - ThunderLAN Driver Eeprom routines +ThunderLAN driver eeprom routines - The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A - EEPROM. These functions are based on information in Microchip's - data sheet. I don't know how well this functions will work with - other EEPROMs. +the Compaq netelligent 10 and 10/100 cards use a microchip 24C02A +EEPROM. these functions are based on information in microchip's +data sheet. I don't know how well this functions will work with +other Eeproms. ****************************************************************************** *****************************************************************************/ - /*************************************************************** - * TLan_EeSendStart - * - * Returns: - * Nothing - * Parms: - * io_base The IO port base address for the - * TLAN device with the EEPROM to - * use. - * - * This function sends a start cycle to an EEPROM attached - * to a TLAN chip. - * - **************************************************************/ - -static void TLan_EeSendStart( u16 io_base ) +/*************************************************************** + * tlan_ee_send_start + * + * Returns: + * Nothing + * Parms: + * io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * + * This function sends a start cycle to an EEPROM attached + * to a TLAN chip. + * + **************************************************************/ + +static void tlan_ee_send_start(u16 io_base) { u16 sio; - outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR ); + outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); - TLan_SetBit( TLAN_NET_SIO_ETXEN, sio ); - TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); - TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio ); - -} /* TLan_EeSendStart */ - - - - - /*************************************************************** - * TLan_EeSendByte - * - * Returns: - * If the correct ack was received, 0, otherwise 1 - * Parms: io_base The IO port base address for the - * TLAN device with the EEPROM to - * use. - * data The 8 bits of information to - * send to the EEPROM. - * stop If TLAN_EEPROM_STOP is passed, a - * stop cycle is sent after the - * byte is sent after the ack is - * read. - * - * This function sends a byte on the serial EEPROM line, - * driving the clock to send each bit. The function then - * reverses transmission direction and reads an acknowledge - * bit. - * - **************************************************************/ - -static int TLan_EeSendByte( u16 io_base, u8 data, int stop ) + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + +} + + + + +/*************************************************************** + * tlan_ee_send_byte + * + * Returns: + * If the correct ack was received, 0, otherwise 1 + * Parms: io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * data The 8 bits of information to + * send to the EEPROM. + * stop If TLAN_EEPROM_STOP is passed, a + * stop cycle is sent after the + * byte is sent after the ack is + * read. + * + * This function sends a byte on the serial EEPROM line, + * driving the clock to send each bit. The function then + * reverses transmission direction and reads an acknowledge + * bit. + * + **************************************************************/ + +static int tlan_ee_send_byte(u16 io_base, u8 data, int stop) { int err; u8 place; u16 sio; - outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR ); + outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; /* Assume clock is low, tx is enabled; */ - for ( place = 0x80; place != 0; place >>= 1 ) { - if ( place & data ) - TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); + for (place = 0x80; place != 0; place >>= 1) { + if (place & data) + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); else - TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio ); + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); } - TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio ); - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio ); - TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio ); - TLan_SetBit( TLAN_NET_SIO_ETXEN, sio ); + tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + err = tlan_get_bit(TLAN_NET_SIO_EDATA, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); - if ( ( ! err ) && stop ) { + if ((!err) && stop) { /* STOP, raise data while clock is high */ - TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); } return err; -} /* TLan_EeSendByte */ - - - - - /*************************************************************** - * TLan_EeReceiveByte - * - * Returns: - * Nothing - * Parms: - * io_base The IO port base address for the - * TLAN device with the EEPROM to - * use. - * data An address to a char to hold the - * data sent from the EEPROM. - * stop If TLAN_EEPROM_STOP is passed, a - * stop cycle is sent after the - * byte is received, and no ack is - * sent. - * - * This function receives 8 bits of data from the EEPROM - * over the serial link. It then sends and ack bit, or no - * ack and a stop bit. This function is used to retrieve - * data after the address of a byte in the EEPROM has been - * sent. - * - **************************************************************/ - -static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) +} + + + + +/*************************************************************** + * tlan_ee_receive_byte + * + * Returns: + * Nothing + * Parms: + * io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * data An address to a char to hold the + * data sent from the EEPROM. + * stop If TLAN_EEPROM_STOP is passed, a + * stop cycle is sent after the + * byte is received, and no ack is + * sent. + * + * This function receives 8 bits of data from the EEPROM + * over the serial link. It then sends and ack bit, or no + * ack and a stop bit. This function is used to retrieve + * data after the address of a byte in the EEPROM has been + * sent. + * + **************************************************************/ + +static void tlan_ee_receive_byte(u16 io_base, u8 *data, int stop) { u8 place; u16 sio; - outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR ); + outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; *data = 0; /* Assume clock is low, tx is enabled; */ - TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio ); - for ( place = 0x80; place; place >>= 1 ) { - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) ) + tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio); + for (place = 0x80; place; place >>= 1) { + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + if (tlan_get_bit(TLAN_NET_SIO_EDATA, sio)) *data |= place; - TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio ); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); } - TLan_SetBit( TLAN_NET_SIO_ETXEN, sio ); - if ( ! stop ) { - TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* Ack = 0 */ - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio ); + tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); + if (!stop) { + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); /* ack = 0 */ + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); } else { - TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); /* No ack = 1 (?) */ - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio ); + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); /* no ack = 1 (?) */ + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); /* STOP, raise data while clock is high */ - TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); - TLan_SetBit( TLAN_NET_SIO_ECLOK, sio ); - TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); - } - -} /* TLan_EeReceiveByte */ - - - - - /*************************************************************** - * TLan_EeReadByte - * - * Returns: - * No error = 0, else, the stage at which the error - * occurred. - * Parms: - * io_base The IO port base address for the - * TLAN device with the EEPROM to - * use. - * ee_addr The address of the byte in the - * EEPROM whose contents are to be - * retrieved. - * data An address to a char to hold the - * data obtained from the EEPROM. - * - * This function reads a byte of information from an byte - * cell in the EEPROM. - * - **************************************************************/ - -static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data ) + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); + } + +} + + + + +/*************************************************************** + * tlan_ee_read_byte + * + * Returns: + * No error = 0, else, the stage at which the error + * occurred. + * Parms: + * io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * ee_addr The address of the byte in the + * EEPROM whose contents are to be + * retrieved. + * data An address to a char to hold the + * data obtained from the EEPROM. + * + * This function reads a byte of information from an byte + * cell in the EEPROM. + * + **************************************************************/ + +static int tlan_ee_read_byte(struct net_device *dev, u8 ee_addr, u8 *data) { int err; - TLanPrivateInfo *priv = netdev_priv(dev); + struct tlan_priv *priv = netdev_priv(dev); unsigned long flags = 0; - int ret=0; + int ret = 0; spin_lock_irqsave(&priv->lock, flags); - TLan_EeSendStart( dev->base_addr ); - err = TLan_EeSendByte( dev->base_addr, 0xA0, TLAN_EEPROM_ACK ); - if (err) - { - ret=1; + tlan_ee_send_start(dev->base_addr); + err = tlan_ee_send_byte(dev->base_addr, 0xa0, TLAN_EEPROM_ACK); + if (err) { + ret = 1; goto fail; } - err = TLan_EeSendByte( dev->base_addr, ee_addr, TLAN_EEPROM_ACK ); - if (err) - { - ret=2; + err = tlan_ee_send_byte(dev->base_addr, ee_addr, TLAN_EEPROM_ACK); + if (err) { + ret = 2; goto fail; } - TLan_EeSendStart( dev->base_addr ); - err = TLan_EeSendByte( dev->base_addr, 0xA1, TLAN_EEPROM_ACK ); - if (err) - { - ret=3; + tlan_ee_send_start(dev->base_addr); + err = tlan_ee_send_byte(dev->base_addr, 0xa1, TLAN_EEPROM_ACK); + if (err) { + ret = 3; goto fail; } - TLan_EeReceiveByte( dev->base_addr, data, TLAN_EEPROM_STOP ); + tlan_ee_receive_byte(dev->base_addr, data, TLAN_EEPROM_STOP); fail: spin_unlock_irqrestore(&priv->lock, flags); return ret; -} /* TLan_EeReadByte */ +} -- cgit v1.2.3