From f637471d33a7a786c455877361e70e0b2da3c56a Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Wed, 17 Jun 2020 15:01:31 +0300 Subject: igc: Remove checking media type during MAC initialization i225 device support only copper mode. There is no point to check media type in the igc_config_fc_after_link_up() method. Signed-off-by: Sasha Neftin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igc/igc_mac.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet/intel') diff --git a/drivers/net/ethernet/intel/igc/igc_mac.c b/drivers/net/ethernet/intel/igc/igc_mac.c index 9a5e44ef45f4..b47e7b0a6398 100644 --- a/drivers/net/ethernet/intel/igc/igc_mac.c +++ b/drivers/net/ethernet/intel/igc/igc_mac.c @@ -468,10 +468,8 @@ s32 igc_config_fc_after_link_up(struct igc_hw *hw) * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. */ - if (mac->autoneg_failed) { - if (hw->phy.media_type == igc_media_type_copper) - ret_val = igc_force_mac_fc(hw); - } + if (mac->autoneg_failed) + ret_val = igc_force_mac_fc(hw); if (ret_val) { hw_dbg("Error forcing flow control settings\n"); @@ -483,7 +481,7 @@ s32 igc_config_fc_after_link_up(struct igc_hw *hw) * has completed, and if so, how the PHY and link partner has * flow control configured. */ - if (hw->phy.media_type == igc_media_type_copper && mac->autoneg) { + if (mac->autoneg) { /* Read the MII Status Register and check to see if AutoNeg * has completed. We read this twice because this reg has * some "sticky" (latched) bits. -- cgit v1.2.3