From 512ab9a001eb88e197859cefbb89b609a971251f Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 21 Feb 2016 15:07:26 +0200 Subject: bnx2x: Fix 84833 RX CRC There's a problem in current 84833 phy configuration - in case 1Gb link is configured and jumbo-sized packets are being used, device will experience RX crc errors. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers/net/ethernet/broadcom') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index a529905a5f26..b496e4a7b910 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -10416,6 +10416,32 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK; } + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { + /* Additional settings for jumbo packets in 1000BASE-T mode */ + /* Allow rx extended length */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, &val); + val |= 0x4000; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, val); + /* TX FIFO Elasticity LSB */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, &val); + val |= 0x1; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, val); + /* TX FIFO Elasticity MSB */ + /* Enable expansion register 0x46 (Pattern Generator status) */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf46); + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, &val); + val |= 0x4000; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, val); + } + if (bnx2x_is_8483x_8485x(phy)) { /* Bring PHY out of super isolate mode as the final step. */ bnx2x_cl45_read_and_write(bp, phy, -- cgit v1.2.3