From dbd479db79572067a4c031f84c204ba30d0256ef Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Nov 2014 18:06:21 -0800 Subject: net: bcmgenet: apply MII configuration in bcmgenet_open() In case an interface has been brought down before entering S3, and then brought up out of S3, all the initialization done during bcmgenet_probe() by bcmgenet_mii_init() calling bcmgenet_mii_config() is just lost since register contents are restored to their reset values. Re-apply this configuration anytime we call bcmgenet_open() to make sure our port multiplexer is properly configured to match the PHY interface. Since we are now calling bcmgenet_mii_config() everytime bcmgenet_open() is called, make sure we only print the message during initialization time not to pollute the console. Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks") Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet/broadcom/genet/bcmgenet.c') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 34055fd59c74..da1a2500c91c 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2140,6 +2140,9 @@ static int bcmgenet_open(struct net_device *dev) goto err_irq0; } + /* Re-configure the port multiplexer towards the PHY device */ + bcmgenet_mii_config(priv->dev, false); + phy_connect_direct(dev, priv->phydev, bcmgenet_mii_setup, priv->phy_interface); @@ -2691,7 +2694,7 @@ static int bcmgenet_resume(struct device *d) phy_init_hw(priv->phydev); /* Speed settings must be restored */ - bcmgenet_mii_config(priv->dev); + bcmgenet_mii_config(priv->dev, false); /* disable ethernet MAC while updating its registers */ umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, false); -- cgit v1.2.3