From d7b901418250f00eaaa18f9135d09ba61b72a5bc Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 23 Dec 2009 04:40:36 +0000 Subject: be2net: Bug fix to avoid soft lockup in loopback test. This change ensures that loopback test command gives up after 4 seconds when the hardware is not responsive. This could happen if the ports are connected properly in loopback mode. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/benet') diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 1b68bd98dc0c..a27fdb35eebf 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1501,6 +1501,7 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req)); + req->hdr.timeout = 4; req->pattern = cpu_to_le64(pattern); req->src_port = cpu_to_le32(port_num); -- cgit v1.2.3 From fced9999ed7f6975fbb2350a73048918ba60a773 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 23 Dec 2009 04:41:44 +0000 Subject: be2net: Bug fix to config NIC appropriately before loopback test NIC controller has to be set to an appropriate mode before doing a loopback test. Test will fail otherwise. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 35 +++++++++++++++++++++++++++++++++++ drivers/net/benet/be_cmds.h | 16 ++++++++++++++++ drivers/net/benet/be_ethtool.c | 37 +++++++++++++++++++++++-------------- 3 files changed, 74 insertions(+), 14 deletions(-) (limited to 'drivers/net/benet') diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index a27fdb35eebf..102ade134165 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1479,6 +1479,41 @@ err: return status; } +int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable) +{ + struct be_mcc_wrb *wrb; + struct be_cmd_req_set_lmode *req; + int status; + + spin_lock_bh(&adapter->mcc_lock); + + wrb = wrb_from_mccq(adapter); + if (!wrb) { + status = -EBUSY; + goto err; + } + + req = embedded_payload(wrb); + + be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE); + + be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE, + sizeof(*req)); + + req->src_port = port_num; + req->dest_port = port_num; + req->loopback_type = loopback_type; + req->loopback_state = enable; + + status = be_mcc_notify_wait(adapter); +err: + spin_unlock_bh(&adapter->mcc_lock); + return status; +} + int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern) { diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 92b87ef156ed..c002b8391b4d 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -155,6 +155,7 @@ struct be_mcc_mailbox { #define OPCODE_LOWLEVEL_HOST_DDR_DMA 17 #define OPCODE_LOWLEVEL_LOOPBACK_TEST 18 +#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE 19 struct be_cmd_req_hdr { u8 opcode; /* dword 0 */ @@ -821,6 +822,19 @@ struct be_cmd_resp_loopback_test { u32 ticks_compl; }; +struct be_cmd_req_set_lmode { + struct be_cmd_req_hdr hdr; + u8 src_port; + u8 dest_port; + u8 loopback_type; + u8 loopback_state; +}; + +struct be_cmd_resp_set_lmode { + struct be_cmd_resp_hdr resp_hdr; + u8 rsvd0[4]; +}; + /********************** DDR DMA test *********************/ struct be_cmd_req_ddrdma_test { struct be_cmd_req_hdr hdr; @@ -912,3 +926,5 @@ extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 num_pkts, u64 pattern); extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern, u32 byte_cnt, struct be_dma_mem *cmd); +extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable); diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 298b92cbd689..da66d15e2223 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -118,6 +118,7 @@ static const char et_self_tests[][ETH_GSTRING_LEN] = { #define BE_MAC_LOOPBACK 0x0 #define BE_PHY_LOOPBACK 0x1 #define BE_ONE_PORT_EXT_LOOPBACK 0x2 +#define BE_NO_LOOPBACK 0xff static void be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) @@ -489,6 +490,19 @@ err: return ret; } +static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type, + u64 *status) +{ + be_cmd_set_loopback(adapter, adapter->port_num, + loopback_type, 1); + *status = be_cmd_loopback_test(adapter, adapter->port_num, + loopback_type, 1500, + 2, 0xabc); + be_cmd_set_loopback(adapter, adapter->port_num, + BE_NO_LOOPBACK, 1); + return *status; +} + static void be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) { @@ -497,23 +511,18 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM); if (test->flags & ETH_TEST_FL_OFFLINE) { - data[0] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_MAC_LOOPBACK, 1500, - 2, 0xabc); - if (data[0] != 0) + if (be_loopback_test(adapter, BE_MAC_LOOPBACK, + &data[0]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[1] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_PHY_LOOPBACK, 1500, - 2, 0xabc); - if (data[1] != 0) + } + if (be_loopback_test(adapter, BE_PHY_LOOPBACK, + &data[1]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[2] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_ONE_PORT_EXT_LOOPBACK, - 1500, 2, 0xabc); - if (data[2] != 0) + } + if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK, + &data[2]) != 0) { test->flags |= ETH_TEST_FL_FAILED; + } data[3] = be_test_ddr_dma(adapter); if (data[3] != 0) -- cgit v1.2.3 From 16c02145902d8597841a25e8443cfb082898a2d7 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 23 Dec 2009 04:42:51 +0000 Subject: be2net: Bug fix to return correct values in ethtool get_settings. Changes to return correct values for transceiver and supported in ethtool get_settings function. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 1 + drivers/net/benet/be_ethtool.c | 40 +++++++++++++++++++++++++++++++--------- 2 files changed, 32 insertions(+), 9 deletions(-) (limited to 'drivers/net/benet') diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9e56014d27ed..9fd8e5ecd5d7 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -275,6 +275,7 @@ struct be_adapter { u32 tx_fc; /* Tx flow control */ int link_speed; u8 port_type; + u8 transceiver; }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index da66d15e2223..5d001c4deac1 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -340,28 +340,50 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) status = be_cmd_read_port_type(adapter, adapter->port_num, &connector); - switch (connector) { - case 7: - ecmd->port = PORT_FIBRE; - break; - default: - ecmd->port = PORT_TP; - break; + if (!status) { + switch (connector) { + case 7: + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case 0: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_EXTERNAL; + break; + default: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + break; + } + } else { + ecmd->port = PORT_AUI; + ecmd->transceiver = XCVR_INTERNAL; } /* Save for future use */ adapter->link_speed = ecmd->speed; adapter->port_type = ecmd->port; + adapter->transceiver = ecmd->transceiver; } else { ecmd->speed = adapter->link_speed; ecmd->port = adapter->port_type; + ecmd->transceiver = adapter->transceiver; } ecmd->duplex = DUPLEX_FULL; ecmd->autoneg = AUTONEG_DISABLE; - ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); ecmd->phy_address = adapter->port_num; - ecmd->transceiver = XCVR_INTERNAL; + switch (ecmd->port) { + case PORT_FIBRE: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + break; + case PORT_TP: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); + break; + case PORT_AUI: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI); + break; + } return 0; } -- cgit v1.2.3