From 7f4ea0340ed4fa5cdfff6b1dd9f51f293d3f5ee7 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 13 Nov 2020 13:34:12 +0100 Subject: mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip() The probe function is only supposed to initialize the controller hardware but not the ECC engine. Indeed, we don't know anything about the NAND chip(s) at this stage. Let's move the logic initializing the ECC engine, even pretty simple, to the ->attach_chip() hook which gets called during nand_scan() routine, after the NAND chip discovery. As the previously mentioned logic is supposed to parse the DT for us, it is likely that the chip->ecc.* entries be overwritten. So let's avoid this by moving these lines to ->attach_chip(). Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20201113123424.32233-8-miquel.raynal@bootlin.com --- drivers/mtd/nand/raw/diskonchip.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c index 94432a453e5e..26b265e4384a 100644 --- a/drivers/mtd/nand/raw/diskonchip.c +++ b/drivers/mtd/nand/raw/diskonchip.c @@ -1269,12 +1269,31 @@ static inline int __init doc2001plus_init(struct mtd_info *mtd) return 1; } +static int doc200x_attach_chip(struct nand_chip *chip) +{ + if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) + return 0; + + chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED; + chip->ecc.size = 512; + chip->ecc.bytes = 6; + chip->ecc.strength = 2; + chip->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; + chip->ecc.hwctl = doc200x_enable_hwecc; + chip->ecc.calculate = doc200x_calculate_ecc; + chip->ecc.correct = doc200x_correct_data; + + return 0; +} + static const struct nand_controller_ops doc200x_ops = { .exec_op = doc200x_exec_op, + .attach_chip = doc200x_attach_chip, }; static const struct nand_controller_ops doc2001plus_ops = { .exec_op = doc2001plus_exec_op, + .attach_chip = doc200x_attach_chip, }; static int __init doc_probe(unsigned long physadr) @@ -1452,16 +1471,6 @@ static int __init doc_probe(unsigned long physadr) nand->controller = &doc->base; nand_set_controller_data(nand, doc); - nand->ecc.hwctl = doc200x_enable_hwecc; - nand->ecc.calculate = doc200x_calculate_ecc; - nand->ecc.correct = doc200x_correct_data; - - nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; - nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED; - nand->ecc.size = 512; - nand->ecc.bytes = 6; - nand->ecc.strength = 2; - nand->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; nand->bbt_options = NAND_BBT_USE_FLASH; /* Skip the automatic BBT scan so we can run it manually */ nand->options |= NAND_SKIP_BBTSCAN | NAND_NO_BBM_QUIRK; -- cgit v1.2.3